Cannon CA Industrial
Cannon
CA Industrial
Bayonet Connectors
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
3
Cannon CA Industrial
A Historical Achievement of Technology Leadership
Defining and Championing Innovation
Showcasing a portfolio of creativity, ITT’s “Engineered For Life” execution embraces products which
have become ubiquitous in a broad collection of markets including: Military/Aerospace. Civil Aircraft,
Industrial Instrumentation, Medical, Oil & Gas, Energy, Transportation, Telecom/Handset, Computer,
Consumer, and Automotive.
ITT’s rich interconnect history embraces contributions of both technological breakthroughs and social
movements. With one of the industry’s broadest product offerings, ITT’s interconnect products have
supported.
• Every Free World space mission, bringing the universe to our universe to our doorstep.
• Motion picture, radio, and television equipment, serving laughter and entertainment to
millions.
• Commercial and military communications systems, linking the voices of the world.
• Computerized tools, reshaping the information highway.
• Aircraft, rapid transit, and automobiles, mobilizing our expanding society.
• Oil and natural gas production, powering the world’s economies.
ITT Cannon, VEAM, & BIW Timeline
1915:
Cannon founded
by James Cannon
2010 …and beyond!
1940:: C
Can
anno
n on
Cannon
creates“
es“K
s“K”
K” sseries
K
er
e
creates“K”
connectors for DC-1’s
196
1
96
960
0:: Cannon
C
1960:
or
orig
rigi
gina
na
n
ates the fi
originates
first
“D
“DD--su
ub
u
b connectors
“D-sub”
1980: Cannon
creates first zero
insertion force
medical connector
Cannon partners with
future innovators
2000
2
t
2000: C
Cannon creates
the first solderless
component interconnector contact
193
930:
0 Cannon
Ca
Ca
1930:
1950:
Cannon
19
950: Cann
9
C
on
develops
first
de
evelops the
he fi
firs
rstt
“Tri-Service”
“T
Tri-Service”
e”” connector,
c
con
onnector,
n
the
modernth
he mother o
off m
mo
odernday
spec’s
da
ay military
y sp
sspec
ec’’s
1970: Ca
Can
anno
non
Cannon
develop
op
pss th
he first
develops
the
“Micro” connectors
1990: Cannon innovates
Type I and Type II card
kit products
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
www.ittcannon.com
4
Cannon CA Industrial
1
Connector Series Selection Table .......................................................................... 4-5
2
Cannon´s range of industrial connectors .................................................................4
3
Introduction CA-Industrial Connectors:....................................................................3
4
Features ..........................................................................................................................4
5
Part Number Creation ...................................................................................................7
6
Endbell Selection ..........................................................................................................8
7
Electrical Data ................................................................................................................9
8
Mechanical Data ..........................................................................................................11
9
Layout reference / Contact arrangement ................................................................13
10
Shell Styles...................................................................................................................22
11
Contacts ........................................................................................................................22
12
Acessories ....................................................................................................................24
13
Assembly Instructions ...............................................................................................26
14
Part Number Index ......................................................................................................30
14
Product Safety Information .......................................................................................30
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
www.ittcannon.com
3
Cannon CA Industrial
Connector
Series
Selection
Table
Sure Seal
CLC
SLC
SLE
APD
Trident
Rectangular
Trident
Circular
-
-
-
-
-
-
-
-
SAE J2030
USCar
SAE J2030
USCar
SAE J2030
USCar
ISO 15170
UL 1977
NFF 61-030
(TFR)
UL 1977
EN 61984
MIL-DTL-5015
VG 95342
2 to 10
2 &4
5, 8, 10 & 15
19 & 28
1 to 51
2 to 36
4 to 48
1 to 65
250 V AC
250 V AC
High Voltage:
500 V DC/AC
50 V DC
MS E/F/R
Industrial/Commercial
General
Military
Standards/Associated
Number of Circuits
Electrical
Max. Operating Voltage
Dielectric Withstanding
Voltage
(at sea level)
Max. Current Rating @
40°C
Mechanical
EMI/RFI Shielding
300 V AC
300 V AC
300 V AC
1200 V AC
1000 V AC
1000 V AC
1000 V AC
1000 V AC
High Voltage:
3500 V AC
2000 V AC
2000 V AC
High Voltage:
3500 V AC
3000 V AC
17 A
5A
13 A
13 A
245 A
13 A
30 A
245 A
-
-
-
-
-
-
Wire Gauge Range AWG
20 to 14
20 to 16
20 to 16
20 to 16
22 to 0
26 to 14
26 to 12
26 to 0
Wire Gauge Range mm²
0,4 - 1,5 mm²
0,50 - 1,0 mm²
0,50 - 1,0 mm²
0,50 - 1,0 mm²
0,35 - 50 mm²
0,14 - 2,5 mm²
0,14 - 4,0 mm²
0,14 - 50 mm²
Power & Signal Layouts
-
-
-
-
-
-
100
25
25
25
50
500
500
100
Ring Snap
Clip Lock
Snap Lock
Snap Lock
Bayonet
Snap Lock
Bayonet
Thread
-
-
-
Environmental Sealing
(mated condition)
IP 68
(1 bar / 12h)
IP 68
IP 68
IP 68
IP67
IP69k
IP 20
IP 67
IP 68
Operating Temperature
-40°C to 105°C
-40°F to 221°F
-40°C to 150°C
-40°F to 302°F
-40°C to 150°C
-40°F to 302°F
-40°C to 125°C
-40°F to 257°F
-40°C to 125°C
-40°F to 257°F
-55°C to 105°C
-67°F to 221°F
-55°C to 125°C
-67°F to 257°F
-55°C to 125°C
-67°F to 257°F
Mating Cycles (max.)
Type of Coupling
Mechanical Coding
Environmental
48 V DC
48 V DC
High Voltage:
500 V DC/AC
Shock Test (g‘s)
Max. Vibration Resistance
-
50
100
100
100
-
50
50
50
10 - 55 Hz
1,5 mm
100 m/s²
10 g´s
100 m/s²
10 g´s
100 m/s²
10 g´s
300 m/s²
30 g‘s
100 m/s²
10 g´s
100 m/s²
10 g´s
100 m/s²
10 g´s
-
-
-
Black Nylon or
Zinc Alloy
Aluminum Alloy
-
Individual Wire Sealing
Cable Jacket Sealing
Shell Plating
Shell Material
Nitril-Butadien
Elastomer
Thermoplastic
Thermoplastic
Thermoplastic
Polyamide
Plastic
Polyamide
Plastic
RoHS Nickel (48h salt spray)
-
-
-
-
-
-
Cadmium (olive, 500h)
-
-
-
-
-
-
-
RoHS Zinc Cobalt (black,
200h)
-
-
-
-
-
-
-
Zinc Cobalt (green, 200h)
-
-
-
-
-
-
-
-
RoHS Zinc Nickel
(blue, 500h) BLUE
GENERATION®
-
-
-
-
-
-
-
-
Tin or Silver
Tin or Gold
Tin or Gold
Tin or Gold
Tin, Silver or
Gold
Tin or Gold
Tin or Gold
Silver or Gold
Contact Plating
-
Contacts
Crimp, machined
-
Crimp, stamped
Solder
-
Printed Circuit Solder
-
Co-Ax
Fiber Optic
First-Mate Last-Break
-
-
-
-
-
-
-
-
-
-
-
-
-
- Not available
-
-
-
Available
-
-
-
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
4
Cannon CA Industrial
CA-INDUSTRIAL
CA Triple
Thread
CGL
-
-
-
VG 95234
-
ISO 16750
VG 95234
DIN/VDE 0627
5.4.3
IEC 512-25-1
DIN/VDE 0100
Part 410
MIL-DTL-26482
Series 1,
VG 95328
MIL-DTL-26482
Series 1,
VG 95328
1 to 85
2 to 55
1 to 85
3 to 11
2 to 61
50 V DC
50 V DC
50 V DC
700 V DC
3000 V AC
2000 V AC
3000 V AC
245 A
30 A
245 A
CA Bayonet
KPT / KPSE
KPTC
PV
KJL
KJ
KJA
MIL-DTL 26482
Series 2
MIL-DTL-38999
Series I
MIL-DTL-38999
Series II
MIL-DTL-38999
Series III
2 to 61
3 to 61
3 to 128
3 to 128
3 to 128
50 V DC
50 V DC
500 V AC
1250 V AC
1250 V AC
1250 V AC
7200 V AC
2300 V AC
2300 V AC
2300 V AC
2300 V AC
2300 V AC
2300 V AC
100 A
22 A
22 A
23 A
23 A
23 A
23 A
-
26 to 0
26 to 12
26 to 0
15 to 3
24 to 16
24 to 16
24 to 12
28 to 12
28 to 12
28 to 12
0,14 - 50 mm²
0,14 - 4,0 mm²
0,14 - 50 mm²
1,5 - 25 mm²
0,21 - 1,91
mm²
0,4 - 2,0 mm²
0,4 - 5,0 mm²
0,45 - 5,0 mm²
0,45 - 5,0 mm²
0,45 - 5,0 mm²
-
-
500
200
500
500
500
500
500
500
500
500
Reverse
Bayonet
Reverse
Bayonet
Triple Thread
Bayonet
Bayonet
Bayonet
Bayonet
Bayonet
Bayonet
Triple Thread
-
-
-
-
IP68 (1 bar /
16h)
IP69k
IP68 (1 bar /
16h)
IP69k
IP68 (1 bar /
16h)
IP69k
IP 67
IP 68
(0,2 bar / 48h)
IP 68
(0,2 bar / 48h)
Environmental
resitant acc. to
EIA-364-02
Environmental
resitant acc. to
EIA-364-02
Environmental
resitant acc. to
EIA-364-02
Environmental
resitant acc. to
EIA-364-02
-55°C to 125°C
-67°F to 257°F
-55°C to 125°C
-67°F to 257°F
-55°C to 125°C
-67°F to 257°F
-50°C to 140° C
-58°F to 284°F
-55°C to 125°C
-67°F to 257°F
-55°C to 125°C
-67°F to 257°F
-55°C to 200°C
-67°F to 392°F
-65°C to 200°C
-85°F to 392°F
-65°C to 200°C
-85°F to 392°F
-65°C to 200°C
-85°F to 392°F
50
50
50
50
50
50
10
300
300
300
200 m/s²
20 g´s
100 m/s²
10 g´s
300 m/s²
30 g‘s
300 m/s²
30 g‘s
200 m/s²
20 g´s
200 m/s²
20 g´s
200 m/s²
20 g´s
300 m/s²
30 g‘s
10Hz - 500Hz
Random: 43,7g
600m/s²
60g‘
-
-
-
Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy
Silver or Gold
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Gold
Gold
Gold
Gold
-
Tin or Gold
Silver or Gold
Silver or Gold
-
Gold
(KPSE)
-
-
-
-
-
(KPT)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Gold
-
-
-
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
5
-
Cannon CA Industrial
About ITT
Interconnect Technologies & Solutions
For over 90 years, ITT has been developing innovative solutions for harsh environment applications. We
have a proven track record of demonstrating our expertise and commitment to the industry, offering
the broadest portfolio of interconnect products.
Our interconnect range include sealed circulars, plastic and metal shell bayonet coupling circulars,
miniature metal shell circulars, PC board header connectors, sensor and direct device connectors. ITT is
also a systems supplier, providing value-added module and harness assemblies.
Cannon’s range of industrial connectors
CA-T
High Vibration Resistance
CA Triple Thread is a series of Industrial aluminium connectors with
threaded coupling for high shock and vibration applications. CA- T
uses the well known CA- Bayonet contact layouts with more than 180
different contact configuraions and Currents up to 245 Amps.
COM
Intermateable to military Standards
CA-COM is a series of Industrial Aluminium Connectors with Bayonet or
Threaded coupling. They are Intermateable with MIL 5015 or VG95234
connectors. Contact layouts with 1 to 37 contacts are available. CACOM has reliable, robust machined contacts for signal and power.
These connectors are suitable for currents up to 245 Amps and an
operating voltage of 50 V.
CMX
Compact Servo Connectors
CMx is a series of compact connectors for Servo motors. Power
and signal connector is in one single housing. These connectors can
be used for currents up to 40 Amps and they are easy and quick
installable.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
6
Cannon CA Industrial
Introduction CA-Industrial Connectors:
CA- Industrial (CA-I) is a series of highly reliable bayonet
connectors for industrial applications. These connectors are
derived from Cannons CA-Bayonet Series according to the
VG95234 standard. The CA-I uses the same robust aluminium
shell design as the proven CA-Bayonet series. To meet industrial
requirements in terms of reduced installation effort the CA-I is
equipped with a hard plastic insulator and stamped contacts
that allow highly automated and quick processing. The CA-I also
uses the well known contact layouts of the CA-Bayonet VG95234
connectors, however due to the different contact designs they are
not intermateable.
Features
Bayonet coupling
.The Bayonet Principle allows fast mating and unmating of the
connector with a simple 120° turn of the coupling nut. At the end of
the mating process an audible and feel able click indicates “Connector
closed” to the user. This ensures that the connector is closed
completely and fully reaches its specified vibration resistance and
Environmental sealing. The coupling nut of the CA-I is equipped with
roller Bolts made out of stainless steel that reduce mating forces and
wear of the bayonet ramps. Bayonet connectors are very robust against
dirt and can be cleaned easily.
Sealing up to IP69K
For the CA-I a selection of different endbells is available.
Depending on the used endbell different environmental
sealing grades can be realized. With the universal endbell a
sealing up to IP69k according to DIN 40050 is ensured. This
means that CA-I connectors can be used in applications where
jet water cleaners are used.
500 h Salt Spray resistance and RoHs compliance
CA-I connectors are designed for reliable use under demanding environmental
conditions. In order to make the aluminium shell resistant against aggressive
media it can be plated with several platings. This can be standard Nickel or
Cannons high performance plating Blue Generation that provides a salt spray
resistance of 500 hours. All platings for the CA-I are environmental friendly
and comply to the european RoHS laws.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
7
Cannon CA Industrial
Stamped Contacts
The CA-I connectors use stamped APK25 – power and T2P – signal contacts. Stamped contacts reduce
assembly time of the connector significantly. This is realized by a highly automated crimp process
with crimp machines. The insertion of the contacts in the connector is done by a simple and fast snap
in without the need of any tool. The CA-I contacts are available in a reeled versions for automated
processing with a crimp machine or loose packed for hand crimping and also for smaller quantities.
Power Contacts APK25
Signal Contacts T2P
•
Tin or gold plating
•
Tin or gold plating
•
200 mating cycles (gold)
•
200 mating cycles (gold)
•
30 Amps
•
13 Amps
•
12 to 20 AWG wires
•
14 to 26 AWG wires
Build up of the CA Industrial Connector
Receptacle
Shell
Insulator
Contacts
Plug
Contacts
Insulator
Shell
Coupling nut
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
8
Cannon CA Industrial
Part Number Creation
Follow these steps to create your part number
STEP 1 Select shell style, plug or receptacle
Plug
Receptacle
Plug Straight................... 06
00
Plug Straight Shielded.... S6
Wall Mount,
Rear Panel
connecting thread,
thread hole in flange
Plug 90° ...........................08
01
Plug 90° Shielded............ S8
02
x2
20
21
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
9
Cable Connecting
plug
Wall Mount, Front
Panel through hole in
flange
Wall Mount,
Front Panel
through hole in
flange, IP69K
Wall Mount,
Rear Panel,
thread hole in
flange
Wall Mount,
Front Panel,
thread hole in
flange
Cannon CA Industrial
STEP 2
STEP 3
STEP 4
Select Layout / Shell Size
Select Endbell
Select Contact
Order Code
Adaptor for
PG cable fitting see page
00 for order
code.
Pxx
Mxx
Use shell size, number of power
and signal contacts for yourpart
number.
18-0200
18
2
0
Contact SIze
Contacts must be ordered
seperately.
See Page 00
STEP 5
Select Shell Plating
1 = Nickel (A34)
2 = Blue Generation
(Zinc Nickel-A240)
Universal
Endbell for
system
cables see
page 00 for
order code.
Txx
F00..................................
Step
S = Socket
Adapter for
flextube see
page 00 for
order code
Fxx
x
P = Pin
Adaptor for
metric cable
fitting see
page 00 for
order code.
See page 00 for contact layout
selection.
Example:
Order code:
Shell Size
Power Contacts
Signal Contacts
Order Code
Contact Type
STEP 6
Select Modification
Sealing Material:
00 = Standard
01 = FKM
Without endbell
1
2
3
2
2
4
5
6
Part No
CAI
CAI-Series
02
Wall
Mount
Receptacle
-18
Shell
Size 18
T07
Univ.
Endbell,
4,5-7,2 mm
-02
2 Power
Contacts
00
0 Signal
Contacts
-P
Pin
Contact
-B
Bayonet
1
Nickel
-00
CR
Sealing
Description
Connector
Series
Shell style
Shell
size
Endbell
No. of
contacts
power
No. of
contacts
signal
Contact
type
Bayonet
Plating
Modification
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
10
Cannon CA Industrial
Delete this page.
Include the talking dog instead?
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
11
Cannon CA Industrial
Electrical Data
Current carrying capacity
Test according to IEC 60512 test 5b
Example layout 20-0306: Insulators are fully equipped with contacts. For other layouts please. contact
factory
a.) Derating of APK25 contact (Power)
x
Layout 20-0306
Wire size APK: 1,5mm² / 2,5mm² / 4,0mm²
APK25 (Power): All 3 contacts under load
T2P (Signal):
not loaded, wire size 1,0mm²
All APK with 1,5mm²: T = 85°C / Imax = 14,8A
All APK with 2,5mm²: T = 85°C / Imax = 19,0A
All APK with 4,0mm²: T = 85°C / Imax = 23,8A
b.) Derating of T2P contact (Signal)
x
Layout 20-0306
Wire size T2P:
0,5mm² / 1,0mm² / 1,5mm²
APK25 (Power):
not loaded, wire size 1,5mm²
T2P (Signal):
All 6 contacts under load
All T2P with 0,5mm²:
T = 85°C / Imax = 7,0A
All T2P with 1,0mm²:
T = 85°C / Imax = 10,0A
All T2P with 1,5mm²:
T = 85°C / Imax = 11,8A
c.) Derating of APK25 contact when T2P contact is
under load
x
Layout 20-0306
Wire size APK25: 1,5mm² / 2,5mm² / 4,0mm²
Wire size T2P:
1,5mm²
APK25 (Power):
All 3 contacts under load
T2P (Signal):
All 6 contacts loaded with 2A
Wire size 1,5mm²
All APK with 1,5mm²:
T = 85°C / Imax = 14,8A
All APK with 2,5mm²:
T = 85°C / Imax = 19,0A
All APK with 4,0mm²:
T = 85°C / Imax = 23,8A
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
12
Cannon CA Industrial
Contact resistance
Test according to IEC 60512, Test 2b
Contact type:
Contact resistance max.,
initially
Contact resistance max.
After mechanical or climatic aging
Signal contact (T2P)
5 mΩ
10 mΩ or 50 % over initial value
Power contact (APK25)
5 mΩ
10 mΩ or 50 % over initial value
Insulation resistance
Test according to IEC 60512-2, Test 3a, Method A
Voltage proof at sea level
Test voltage (V DC)
Insulation resistance
min. (MΩ) at 25°C
Insulation
resistance min.
(MΩ) at 85°C
contact / contact
500
5000
100
contact / shield.
500
5000
100
Contact / contact
500
5000
100
Contact / housing (shielding)
500
5000
100
Signal line
Power line
Shielding effectiveness
Test according to VG95373 part 40
Shielding effectiveness with Universal Endbell
Frequency range
30 kHz-100 MHz
Attenuation min
50 dB
Mechanical Data
Operating Temperature
Operating Temperature
Minimum
-55°C
Maximum
+125°C
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
13
Cannon CA Industrial
Vibration
Test according to IEC 60068-2-6, Test Fc
Sinusoidal vibration
Frequency range
10-2000 Hz
Amplitude
0,75 mm
Tin plated T2P contacts: 100 m/s²
Acceleration
Gold plated T2P contacts: 200 m/s²
Duration per axis / axis
8h/3
No. of axis*
3
Shock
Half sine shock test according to IEC 60068-2-27, Test Ea: Shock
Shock
Acceleration
500m/s²
Duration
11ms
No. of shocks per directions
3
No. of directions*
6
* In 3 perpendicular directions versus the connector axis
Mechanical operation
Test according to IEC 60512-5, Test 9a
Mating cycles of contacts
Tin plated contacts
50
Gold plated contacts
200
Contact retention in insert
Test according to IEC 60512, test no. 15a
The contacts in the insert withstand the force specified below.
Type of connector
Force
Signal contacts (T2P)
68 N
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
14
Cannon CA Industrial
Power contacts (APK25)
100 N
Sealing Performance
Depending on the used endbell and receptacle the CA-I connectors fulfill IP67, IP68 and IP69k
requirements.
Test according to IEC 60529:
IP67: 0,1bar pressure (water depth of 1 m) for 30 min
IP68: 1 bar pressure (water depth of 10 m) for 16 hours
IP69K: A water jet with 100 bar and a Temperature of 80°C is directed from different angles on the
connector.
Chemical Resistance of Sealing Material
CA-I connectors can be equipped with different types of sealing materials.
The chemical resistances of the sealing materials are described in the table below.
For more information about chemical resistances please consult factory.
Sealing Material
Standard (CR)
FKM
Silicon oil
*
*
Air
*
*
Lower Alcohols
*
*
Diesel oil
*
Cerosin
*
Mineral oil
*
Deluted Acids
*
Deluted Lye
*
Synthetic oils
*
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
15
Cannon CA Industrial
Layout reference / Contact arrangement
CA-I connectors can be equipped with power (APK25) and signal (T2P) contacts.
The available contact arrangements are listed in the table below. Layouts with the remark “Consult
Factory”and customer specific layouts can be offered on request.
Alternate Insert Positions Selection
Besides the normal position further insulator positions
are possible to prevent mismatching of connectors.
Polarisation is achieved by turning the pin contact insulator
clockwise towards the shell, the socket insulator, however,
in opposite clockwise direction. The information refers to
the mating side of the contact insulator. For ordering use
the appropriate letter (N to Z) from the “Alternate insert
option” column in the table below.
Contact
Alternate Insert Positions
Arrangement
Number and Type of
Contacts
Nº
Wº
Xº
Yº
Zº
18...-0200
2 x APK25
0
35
110
250
325
0
-
120
240
-
0
-
170
265
-
0
-
-
-
-
Consult Factory
18...-0400
4 x APK25
Available
18...-0500
5 x APK25
Consult Factory
18...-0300
3 x APK25
Consult Factory
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
16
Cannon CA Industrial
Contact
Alternate Insert Positions
Arrangement
Number and Type of
Contacts
Nº
Wº
Xº
Yº
Zº
18...-0004
4 x T2P
0
35
110
250
325
0
80
-
-
280
0
70
145
-
290
0
90
180
270
0
70
145
215
290
0
80
110
250
280
Consult Factory
18...-0006
6 x T2P
Consult Factory
18...-0010
10 x T2P
Available
18...-0005
5 x T2P
Consult Factory
18...-0003
3 x T2P
Consult Factory
18...-0201
2 x APK25 / 1 x T2P
Consult Factory
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
17
Cannon CA Industrial
Contact
Alternate Insert Positions
Arrangement
Number and Type of
Contacts
Nº
Wº
Xº
Yº
Zº
18...-0107
1 x APK25 / 7 x T2P
0
70
-
-
290
0
80
110
250
280
0
70
145
215
290
0
45
110
250
-
0
80
-
-
280
0
-
110
250
-
Consult Factory
18...-0205
2 x APK25 / 5 x T2P
Consult Factory
20...-0300
3 x APK25
Consult Factory
20...-0400
4 x APK25
Consult Factory
20...-0700
7 x APK25
Consult Factory
20...-0900
9 x APK25
Available
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
18
Cannon CA Industrial
Alternate Insert Positions
Contact
Arrangement
Number and Type of
Contacts
Nº
Wº
Xº
Yº
Zº
20...-0003
3 x T2P
0
70
145
215
290
0
80
110
250
280
0
-
-
-
-
0
35
110
250
325
0
80
-
-
280
0
-
-
-
-
Consult Factory
20...-0008
8 x T2P
Consult Factory
20...-0013
13 x T2P
Consult Factory
20...-0014
14 x T2P
Available
20...-0017
17 x T2P
Available
20...-0010
11 x T2P
Consult Factory
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
19
Cannon CA Industrial
Alternate Insert Positions
Contact
Arrangement
Number and Type of
Contacts
Nº
Wº
Xº
Yº
Zº
20...-0019
19 x T2P
0
-
80
280
-
Consult Factory
20...-0207
2 x APK25 / 7 x T2P
0
80
110
250
280
20...-0501
5 x APK25 / 1 x T2P
0
90
180
270
-
0
35
110
250
325
0
35
110
250
325
0
70
145
215
290
Available
20...-0306
3 x APK25 / 6 x T2P
Consult Factory
22...-0200
2 x APK25
Consult Factory
22...-0300
3 x APK25
Consult Factory
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
20
Cannon CA Industrial
Contact
Alternate Insert Positions
Arrangement
Number and Type of
Contacts
Nº
Wº
Xº
Yº
Zº
22...-0700
7 x APK25
0
80
-
-
280
0
35
-
250
-
0
35
110
250
325
0
80
-
-
280
0
80
110
250
280
0
35
110
250
325
Consult Factory
22...-0800
8 x APK25
Available
22...-0004
4 x T2P
Available
22...-0019
19 x T2P
Available
22...-0014
14 x T2P
Consult Factory
22...-0009
9 x T2P
Consult Factory
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
21
Cannon CA Industrial
Contact
Alternate Insert Positions
Arrangement
Number and Type of
Contacts
Nº
Wº
Xº
Yº
Zº
22...-0204
2 x APK25 / 4 x T2P
0
35
110
250
325
0
80
110
250
280
0
80
110
250
280
0
80
-
-
280
0
80
110
250
280
0
80
100
260
280
Consult Factory
22...-0501
5 x APK25 / 1 x T2P
Consult Factory
22...-0306
3 x APK25 / 6 x T2P
Consult Factory
24...-0700
7 x APK25
Consult Factory
24...-0800
8 x APK25
Consult Factory
24...-1200
12 x APK25
Consult Factory
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
22
Cannon CA Industrial
Contact
Alternate Insert Positions
Arrangement
Number and Type of
Contacts
Nº
Wº
Xº
Yº
Zº
24...-0016
16 x T2P
0
80
110
250
280
0
-
-
-
-
0
80
-
-
280
0
80
110
250
280
0
65
146
235
-
0
80
110
250
280
Consult Factory
24...-0012
12 x T2P
Consult Factory
24...-0007
7 x T2P
Consult Factory
24...-0024
24 x T2P
Available
24...-0028
28 x T2P
Available
24...-0214
2 x APK25 / 14 x T2P
Consult Factory
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
23
Cannon CA Industrial
Contact
x
Alternate insert positions
Arrangement
Number and Type of
Contacts
Nº
Wº
Xº
Yº
Zº
24...-0209
2 x APK25 / 9 x T2P
0
80
110
250
280
0
80
135
195
-
0
80
110
250
280
0
80
110
250
280
0
80
110
250
280
0
80
110
250
280
MISSING
IMAGE
28...-1200
Consult Factory
12 x APK25
Consult Factory
28...-0035
35 x T2P
Consult Factory
28...-0020
20 x T2P
Consult Factory
28...-0037
37 x T2P
Consult Factory
28...-0043
43 x T2P
Consult Factory
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
24
Cannon CA Industrial
Contact
Arrangement
28...-0212
Number and Type of
Contacts
Alternate insert positions
Nº
Wº
Xº
Yº
Zº
0
35
110
250
325
0
80
110
250
280
0
80
110
250
280
0
80
110
250
280
0
80
110
250
280
0
-
100
260
-
2 x APK25 / 12 x T2P
Consult Factory
28...-0606
6 x APK25 / 6 x T2P
Consult Factory
28...-0406
4 x APK25 / 6 x T2P
Consult Factory
28...-0418
4 x APK25 / 18 x T2P
Consult Factory
28...-1004
10 x APK25 / 4 x T2P
Consult Factory
28...-0919
9 x APK25 / 19 x T2P
Available
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
25
Cannon CA Industrial
Contact
Arrangement
32...-0054
Number and Type of
Contacts
Alternate insert positions
Nº
Wº
Xº
Yº
Zº
0
80
110
250
280
0
80
110
250
280
0
80
110
250
280
0
80
125
235
280
0
80
125
235
280
0
80
110
250
280
54 x T2P
Consult Factory
32...-0047
47 x T2P
Consult Factory
32...-0055
55 x T2P
Available
32...-0728
7 x APK25 / 28 x T2P
Available
32...-0624
6 x APK25 / 24 x T2P
Consult Factory
32...-0518
5 x APK25 / 18 x T2P
Consult Factory
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
26
Cannon CA Industrial
Contact
Arrangement
36...-2700
Number and Type of
Contacts
Alternate insert positions
Nº
Wº
Xº
Yº
Zº
0
80
110
250
280
0
80
125
235
280
0
60
125
245
305
0
80
110
250
280
0
80
110
250
280
0
80
110
250
280
27 x APK25
Consult Factory
36...-0048
48 x T2P
Consult Factory
36...-0035
35 x T2P
Consult Factory
36...-0052
52 x T2P
Consult Factory
36...-0740
7 x APK25 / 40 x T2P
Available
36...-0146
1 x APK25 / 46 x T2P
Consult Factory
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
27
Cannon CA Industrial
Shell Styles
Wall Mounting Receptacle, Rear Panel Mounting
Endbell:
none
Shielding:
Depending on endbell selection
Sealing (*):
Depending on endbell selection
CAI00-T00
Wall mounting receptacle with thread for endbell assembly, threaded holes in flange, rear panel
mounting.
Part No.
A
B
C
-0.15
+0,4
±0,2
CAI00-18T00-**-*-B
30.8
23.05
4
CAI00-20T00-**-*-B
34.2
23.05
CAI00-22T00-**-*-B
37.4
CAI00-24T00-**-*-B
D
E
F
G
H
±0,3
±0,1
±0,3
1-20UNEF-2A
41.85
27.0
35
M4
4
1 1/8-18NEF-2A
41.85
29.4
38
M4
23.05
4
1 1/4-18NEF-2A
41.85
31.8
41
M4
40.9
23.05
4
1 3/4-18NEF-2A
41.85
34.9
44.5
M4
CAI00-28T00-**-*-B
46.7
24.05
4
1 5/8-18NEF-2A
42.85
39.7
50.8
M5
CAI00-32T00-**-*-B
53.4
24.05
4
1 7/8-16N-2A
43
44.5
57
M5
CAI00-36T00-**-*-B
59.6
24.05
4
2 1/8-16N-2A
42.85
49.0
63.5
M5
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
28
Cannon CA Industrial
Wall Mounting Receptacle Rear Panel Mounting
Endbell:
Universal Endbell
Shielding:
Yes
Sealing (*):
IP67, IP68, IP69K
CAI00-T-B
Wall mounting receptacle with thread for endbell assembly, threaded holes in flange, Rear Panel
Mounting, with Universal Endbell.
Part No.
A
B
C
D
E
F
G
H
I
- 0,15
max
+ 0,4
± 0,2
max
± 0,1
± 0,3
Thread
Ø
CAI00-18T11-**-*-B
30.8
24.0
23.05
4,0
92
27.0
35.0
M4
7,0 - 10,3
CAI00-18T13-**-*-B
30.8
27.4
23.05
4,0
90
27.0
35.0
M4
9,0 - 12,5
CAI00-18T14-**-*-B
30.8
30.0
23.05
4,0
90
27.0
35.0
M4
11,5 - 14,2
CAI00-20T07-**-*-B
34.2
17.9
23.05
4,0
93
29.4
38.0
M4
4,5 - 7,2
CAI00-20T09-**-*-B
34.2
21.0
23.05
4,0
92
29.4
38.0
M4
6,5 - 9,3
CAI00-20T11-**-*-B
34.2
24.0
23.05
4,0
95.5
29.4
38.0
M4
8,0 - 10,3
CAI00-20T13-**-*-B
34.2
27.4
23.05
4,0
90
29.4
38.0
M4
9,0 - 12,5
CAI00-20T17-**-*-B
34.2
33.6
23.05
4,0
92
29.4
38.0
M4
14,5 - 16,6
CAI00-22T13-**-*-B
37.4
27.4
23.05
4,0
90
31.8
41.0
M4
9,0 - 12,5
CAI00-22T14-**-*-B
37.4
30.0
23.05
4,0
90
31.8
41.0
M4
11,5 - 14,2
CAI00-22T17-**-*-B
37.4
33.6
23.05
4,0
99
31.8
41.0
M4
14,5 - 16,6
CAI00-28T17-**-*-B
46.7
33.6
24.05
4,0
109
39.7
50.8
M5
14,5 - 16,6
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
29
Cannon CA Industrial
Wall Mounting Receptacle, Rear Panel Mounting
Endbell:
Metric Adaptor
Shielding:
Depending on used metric gland
Sealing(*):
Depending on used metric gland
CAI00-M-B
Wall mounting receptacle wit h thread for endbell assembly, threaded holes in flange, rear panel
mounting, with adaptor for metric glands (**)
Part No.
A
B
C
D
E
F
G
H
I
- 0,15
+ 0,4
± 0,2
Thread
max
max
± 0,1
± 0,3
Thread
CAI00-18M25-**-*-B
30.8
23.05
4,0
M25x1,5
31.0
80
27.0
35.0
M4
CAI00-20M25-**-*-B
34.2
23.05
4,0
M25x1,5
34.0
80
29.4
38.0
M4
CAI00-22M32-**-*-B
37.4
23.05
4,0
M32x1,5
40.0
85
31.8
41.0
M4
CAI00-24M32-**-*-B
40.9
23.05
4,0
M32x1,5
40.0
85
34.9
44.5
M4
CAI00-28M32-**-*-B
46.7
24.05
4,0
M32x1,5
41.0
86
39.7
50.8
M5
CAI00-32M40-**-*-B
53.4
24.05
4,0
M40x1,5
48.5
91
44.5
57.0
M5
CAI00-36M40-**-*-B
59.6
24.05
4,0
M40x1,5
48.5
91
49.2
63.5
M5
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
(**) Metric gland has to be ordered separately.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
30
Cannon CA Industrial
Wall Mounting Receptacle, Rear Panel Mounting
Endbell:
PG Adaptor
Shielding:
Depending on used PG termination
Sealing:
Depending on used PG termination
CAI00-P-B
Wall mounting receptacle with thread for endbell assembly, threaded holes in flange, rear panel
mounting, with adaptor for PG glands
Part No.
A
B
C
D
E
F
G
H
I
- 0,15
Thread
max
+ 0,4
± 0,2
max
± 0,1
± 0,3
Thread
CAI00-18P13-**-*-B
30.8
PG13,5
25
23.05
4,0
73
27.0
35.0
M4
CAI00-20P16-**-*-B
34.2
PG16
27
23.05
4,0
74
29.4
38.0
M4
CAI00-22P16-**-*-B
37.4
PG16
27
23.05
4,0
77
31.8
41.0
M4
CAI00-24P16-**-*-B
40.9
PG16
27
23.05
4,0
77
34.9
44.5
M4
CAI00-28P21-**-*-B
46.7
PG21
32
24.05
4,0
78
39.7
50.8
M5
CAI00-32P29-**-*-B
53.4
PG29
41
24.05
4,0
78
44.5
57.0
M5
CAI00-36P29-**-*-B
59.6
PG29
41
24.05
4,0
89
49.2
63.5
M5
(*) Sealing is in mated condition. A plug with the suitable sealing degree is needed
(**) PG gland has to be ordered separately.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
31
Cannon CA Industrial
Cable Connecting Plug
Endbell:
none
Shielding:
Depending on used Endbell
Sealing (*):
Depending on used Endbell
CAI01-T00
Straight plug for cable connection with thread for endbell assembly.
Part No.
A
B
C
-0.15
+0,4
±0,2
CAI01-18T00-**-*-B
30.8
23.05
4
CAI01-20T00-**-*-B
34.2
23.05
CAI01-22T00-**-*-B
37.4
CAI01-24T00-**-*-B
D
E1
E2
F
G
±0,3
±0,3
max
±0,2
1-12UNEF-2A
42.2
41.85
34.8
31.7
4
1 1/8-18NEF-2A
42.2
41.85
37.8
34.9
23.05
4
1 1/4-18NEF-2A
42.2
41.85
41.1
38.1
40.9
23.05
4
1 3/4-18NEF-2A
42.2
41.85
44.6
41.3
CAI01-28T00-**-*-B
46.7
24.05
4
1 5/8-18NEF-2A
42.85
42.85
50.9
47.6
CAI06-32T00-**-*-B
53.4
24.05
4
1 7/8-16N-2A
42.85
42.85
57.1
54
CAI01-36T00-**-*-B
59.6
24.05
4
2 1/8-16N-2A
42.85
42.85
63.6
60.6
(*) Sealing is in mated condition. A plug and with the suitable sealing grade is needed
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
32
Cannon CA Industrial
Cable Connecting, Plug PG Gland
Endbell:
PG Adaptor
Shielding:
Sealing (*):
Depending on used PG termination
Depending on used PG termination
CAI01-P-B
straight plug for cable connection with adaptor for PG glands (**)
Part No.
A
B
C
D
E
F
G
H
- 0,15
Thread
max
+ 0,4
± 0,2
max
max
± 0,2
CAI01-18P13-**-*-B
30.8
PG13,5
25
23.05
4,0
73
34.8
31.7
CAI01-20P16-**-*-B
34.2
PG16
27
23.05
4,0
74
37.8
34.9
CAI01-22P16-**-*-B
37.4
PG16
27
23.05
4,0
77
41.1
38.1
CAI01-24P16-**-*-B
40.9
PG16
27
23.05
4,0
77
44.6
41.3
CAI01-28P21-**-*-B
46.7
PG21
32
24.05
4,0
78
50.9
47.6
CAI01-32P29-**-*-B
53.4
PG29
41
24.05
4,0
78
57.1
54.0
CAI01-36P29-**-*-B
59.6
PG29
41
24.05
4,0
89
63.6
60.6
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
(**) PG gland has to be ordered separately.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
33
Cannon CA Industrial
Cable Connecting Plug, Metric Gland
Endbell:
Shielding:
Sealing (*):
Metric Adaptor
Depending on used metric gland
Depending on used metric gland
CAI01-M-B
straight plug for cable connection with adaptor for metric glands (**)
Part No.
A
B
C
D
E
F
G
H
- 0,15
+ 0,4
± 0,2
Thread
max
max
max
± 0,2
CAI01-18M25-**-*-B
30.8
23.05
4,0
M25x1,5
31.0
80
34.8
31.7
CAI01-20M25-**-*-B
34.2
23.05
4,0
M25x1,5
34.0
80
37.8
34.9
CAI01-22M32-**-*-B
37.4
23.05
4,0
M32x1,5
40.0
85
41.1
38.1
CAI01-24M32-**-*-B
40.9
23.05
4,0
M32x1,5
40.0
85
44.6
41.3
CAI01-28M32-**-*-B
46.7
24.05
4,0
M32x1,5
41.0
86
50.9
47.6
CAI01-32M40-**-*-B
53.4
24.05
4,0
M40x1,5
48.5
91
57.1
54.0
CAI01-36M40-**-*-B
59.6
24.05
4,0
M40x1,5
48.5
91
63.6
60.6
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
(**) Metric gland has to be ordered separately.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
34
Cannon CA Industrial
Cable Connecting Plug, Universal Endbell
Endbell:
Shielding:
Universal Endbell
Yes
Sealing(*):
IP67, IP68, IP69K
CAI01-T-B
straight plug for cable connection with Universal Endbell
It is important that the diamteter of the cable is in the range of the endbell Diameter H
Part No.
A
B
C
D
E
F
G
H
- 0,15
max
+ 0,4
± 0,2
max
max
± 0,2
Ø
CAI01-18T11-**-*-B
30.8
24.0
23.05
4,0
92
34.8
31.7
8,0 - 10,3
CAI01-18T13-**-*-B
30.8
27.4
23.05
4,0
90
34.8
31.7
9,0 - 12,5
CAI01-18T14-**-*-B
30.8
30.0
23.05
4,0
90
34.8
31.7
11,5 - 14,2
CAI01-20T07-**-*-B
34.2
17.9
23.05
4,0
95.5
37.8
34.9
4,5 - 7,2
CAI01-20T09-**-*-B
34.2
21.0
23.05
4,0
92
37.8
34.9
6,5 - 9,3
CAI01-20T11-**-*-B
34.2
24.0
23.05
4,0
95.5
37.8
34.9
8,0 - 10,3
CAI01-20T13-**-*-B
34.2
27.4
23.05
4,0
90
37.8
34.9
9,0 - 12,5
CAI01-20T17-**-*-B
34.2
33.6
23.05
4,0
92
37.8
34.9
14,5 - 16,6
CAI01-22T13-**-*-B
37.4
27.4
23.05
4,0
90
41.1
38.1
9,0 - 12,5
CAI01-22T14-**-*-B
37.4
30.0
23.05
4,0
90
41.1
38.1
11,5 - 14,2
CAI01-22T17-**-*-B
37.4
33.6
23.05
4,0
99
41.1
38.1
14,5 - 16,6
CAI01-28T17-**-*-B
46.7
33.6
24.05
4,0
109
50.9
47.6
14,5 - 16,6
(*) Sealing is in mated condition. A receptacle with the suitable sealing grade is needed
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
35
Cannon CA Industrial
Box mounting receptacle, Front Panel Mounting
Endbell:
none
Shielding:
none
Sealing(*):
Mating side(*): IP67, IP68, IP69k
cable side: unsealed
CAIx2-T00
Box mounting receptacle
Front panel mounting with O-Ring Sealing for IP69k
Part No.
A
B
C
D Socket
D Pin
E
F
G
H
- 0,15
+ 0,4
± 0,2
± 0,3
± 0,5
max
± 0,1
± 0,3
H13
CAIx2-18T00-**-*-B
30.8
19.0
4.0
33.8
42.0
25.6
27.0
35.0
3.2
CAIx2-20T00-**-*-B
34.2
19.0
4.0
33.8
42.0
29.0
29.4
38.0
3.2
CAIx2-22T00-**-*-B
37.4
19.0
4.0
33.8
42.0
32.2
31.8
41.0
3.2
CAIx2-24T00-**-*-B
40.9
20.6
4.0
33.8
42.0
35.3
34.9
44.5
3.7
CAIx2-28T00-**-*-B
46.7
20.6
4.0
33.8
42.0
41.4
39.7
50.8
3.7
CAIx2-32T00-**-*-B
53.4
22.2
4.0
33.8
42.0
47.8
44.5
57.0
4.3
CAIx2-36T00-**-*-B
59.6
22.2
4.0
33.8
42.0
52.6
49.2
63.5
4.3
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
36
Cannon CA Industrial
Box mounting receptacle, Front Panel Mounting
Endbell:
none
Shielding:
none
Sealing (*):
Mating side: IP67,
cable side: unsealed
CAI02-T00-B
Box mounting receptacle
Front panel mounting
Pin
Socket
Part No.
A
B
C
D Socket
D Pin
E
F
G
H
- 0,15
+ 0,4
± 0,2
± 0,3
± 0,5
max
± 0,1
± 0,3
H13
CAI02-18T00-**-*-B
30.8
19.0
4.0
33.8
42.0
25.6
27.0
35.0
3.2
CAI02-20T00-**-*-B
34.2
19.0
4.0
33.8
42.0
29.0
29.4
38.0
3.2
CAI02-22T00-**-*-B
37.4
19.0
4.0
33.8
42.0
32.2
31.8
41.0
3.2
CAI02-24T00-**-*-B
40.9
20.6
4.0
33.8
42.0
35.3
34.9
44.5
3.7
CAI02-28T00-**-*-B
46.7
20.6
4.0
33.8
42.0
41.4
39.7
50.8
3.7
CAI02-32T00-**-*-B
53.4
22.2
4.0
33.8
42.0
47.8
44.5
57.0
4.3
CAI02-36T00-**-*-B
59.6
22.2
4.0
33.8
42.0
52.6
49.2
63.5
4.3
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
37
Cannon CA Industrial
Box mounting receptacle, Rear Panel Mounting
Endbell:
none
Shielding:
none
Sealing:
Mating side(*): IP67,
cable side: unsealed
CAI20-T00-B
Box mounting receptacle
Rear panel mounting with thread hole in flange
Pin
Part No.
A
B
C
D Socket
D Pin
E
F
G
H
- 0,15
+ 0,4
± 0,2
± 0,3
± 0,5
max
± 0,1
± 0,3
CAI20-18T00-**-*-B
30.8
23.05
4.0
33.8
41.9
25.6
27.0
35.0
M4
CAI20-20T00-**-*-B
34.2
23,05
4.0
33.8
42.0
29.0
29.4
38.0
M4
CAI20-22T00-**-*-B
37.4
23,05
4.0
33.8
41.9
32.2
31.8
41.0
M4
CAI20-24T00-**-*-B
40.9
23,05
4.0
33.8
41.9
35.3
34.9
44.5
M4
CAI20-28T00-**-*-B
46.7
24,05
4.0
33.8
41.9
41.4
39.7
50.8
M5
CAI20-32T00-**-*-B
53.4
24,05
4.0
33.8
41.9
47.8
44.5
57.0
M5
CAI20-36T00-**-*-B
59.6
24,05
4.0
33.8
41.9
54.1
49.2
63.5
M5
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
38
Cannon CA Industrial
Straight plug, PG Gland
Endbell:
PG Adaptor
Shielding:
none
Sealing:
Depending on used PG gland
CAI06-Pxx-B
Straight plug for usage of PG glands (**)
Part No.
A
B
C
D
max
Thread
max
max
CAI*6-18P13-**-*-B
36.5
PG13,5
25
69
CAI*6-20P16-**-*-B
39.9
PG16
27
70
CAI*6-22P16-**-*-B
43.1
PG16
27
73
CAI*6-24P16-**-*-B
46.6
PG16
27
74
CAI*6-28P21-**-*-B
53.4
PG21
32
74
CAI*6-32P29-**-*-B
60.1
PG29
41
76
CAI*6-36P29-**-*-B
66.3
PG29
41
87
(*) Sealing is in mated condition. A receptacle with the suitable sealing grade is needed
(**) PG gland has to be ordered separately.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
39
Cannon CA Industrial
Straight plug, Flex Tube
Endbell:
Flex tube adaptor
Shielding:
none
Sealing (*):
IP67, IP68
CAI06-F01-B
straight plug with endbell for flex tubes.
Part No.
A
B
max
C
D
E
Thread
min
max
CAI*6-18F01-**-*-B
36.5
16,7
1-20UNEF-2A
9.5
54
CAI*6-20F01-**-*-B
39.9
19,8
1-3/16-18UNEF-2A
9.5
55
CAI*6-22F01-**-*-B
43.1
19,8
1-3/16-18UNEF-2A
9.5
58
CAI*6-24F01-**-*-B
46.6
25,4
1-7/16-18UNEF-2A
9.5
59
CAI*6-28F01-**-*-B
53.4
27,0
1-7/16-18UNEF-2A
9.5
60
CAI*6-32F01-**-*-B
60.1
32,5
1-3/4-18UNS-2A
11.0
62
CAI*6-36F01-**-*-B
66.3
35,7
2-18UNS-2A
11.8
64
(*) Sealing is in mated condition. A receptacle with the suitable sealing grade is needed. Flextube must be sealed.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
40
Cannon CA Industrial
Straight plug, Metric Gland
Endbell:
Metric Adaptor
Shielding:
Sealing (*):
Depending on used metric gland
Depending on used metric gland
CAI06-Mxx-B
straight plug for usage of metric glands (**)
Part No.
A
B
C
D
E
F
max
- 0,3
Thread
max
min
max
CAI*6-18M25-**-*-B
36.5
23,6
M25x1,5
31.0
11
77
CAI*6-20M25-**-*-B
39.9
26,7
M25x1,5
34.0
11
77
CAI*6-22M32-**-*-B
43.1
29,8
M32x1,5
40.0
12
82
CAI*6-24M32-**-*-B
46.6
33,0
M32x1,5
40.0
12
83
CAI*6-28M32-**-*-B
53.4
38,6
M32x1,5
41.0
12
83
CAI*6-32M40-**-*-B
60.1
44,9
M40x1,5
48.5
12
90
CAI*6-36M40-**-*-B
66.3
50,3
M40x1,5
48.5
12
90
(*) Sealing is in mated condition. A receptacle with the suitable sealing grade is needed
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
41
Cannon CA Industrial
(**) Metric gland has to be ordered separately.
Straight plug
Endbell:
none
Shielding:
none
Sealing (*):
Depending on endbell
CAI06-T00
straight plug with thread for endbell assembly
Part No.
A
B
C1
C2
max
Thread
CAI*6-18T00-**-*-B
36.5
1-20UNEF-2A
42.2
37.8
CAI*6-20T00-**-*-B
39.9
1 1/18NEF-2A
42.2
37.8
CAI*6-22T00-**-*-B
43.1
1 1/4-18NEF-2A
42.2
37.8
CAI*6-24T00-**-*-B
46.6
1 3/4-18NEF-2A
42.0
39.4
CAI*6-28T00-**-*-B
53.4
1 5/818NEF-2A
42.2
39.4
CAI*6-32T00-**-*-B
60.1
1 7/8-16-N-2A
42.2
41.0
CAI*6-36T00-**-*-B
66.3
2 1/8-16N-2A
42.2
41.0
(*) Sealing is in mated condition. A receptacle and endbell with the suitable sealing grade is needed
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
42
Cannon CA Industrial
Straight plug, Universal Endbell
Endbell:
Universal Endbell
Shielding:
Yes
Sealing (*):
IP67, IP68, IP69K
CAI06-Txx-B
straight plug with Universal Endbell
Part No.
A
B
E
D
max
max
Ø
CAI*6-18T11-**-*-B
36.5
88
24.0
8,0 - 10,3 mm
CAI*6-18T13-**-*-B
36.5
88
27.4
9,0 - 12,5 mm
CAI*6-18T14-**-*-B
36.5
88
30.0
11,5 - 14,2 mm
CAI*6-20T07-**-*-B
39.9
92
17.9
4,5 - 7,2 mm
CAI*6-20T09-**-*-B
39.9
92
21.0
6,5 - 9,3 mm
CAI*6-20T11-**-*-B
39.9
92
24.0
8,0 - 10,3 mm
CAI*6-20T13-**-*-B
39.9
92
27.4
9,0 - 12,5 mm
CAI*6-20T17-**-*-B
39.9
92
33.6
14,5 - 16,6 mm
CAI*6-22T13-**-*-B
43.1
98
27.4
9,0 - 12,5 mm
CAI*6-22T14-**-*-B
43.1
98
30.0
11,5 - 14,2 mm
CAI*6-22T17-**-*-B
43.1
98
33.6
14,5 - 16,6 mm
CAI*6-28T17-**-*-B
53.4
105
33.6
14,5 - 16,6 mm
(*) Sealing is in mated condition. A receptacle with the suitable sealing grade is needed
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
43
Cannon CA Industrial
90° Plug, PG Gland
Endbell:
PG Adaptor
Shielding:
Depending on used PG gland
Sealing (*):
Depending on used PG gland
CAI08-Pxx
90° plug
for usage of PG glands (**)
Part No.
A
B
C
D
E
max
-0.3
max
CAI*8-18P16-**-*B
36.5
23.6
77
26.3
PG16
CAI*8-20P21-**-*B
39.9
26.7
82
29.0
PG21
CAI*8-22P21-**-*B
43.1
29.8
82
29.5
PG21
(*) Sealing is in mated condition. A receptacle with the suitable sealing grade is needed
(**) PG gland has to be ordered separately.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
44
Cannon CA Industrial
Contacts
Contacts are not part of the connectors Part No. they must be ordered separately.
Power Contacts – APK25 Currant Rating: 30A (see derating)
Wire Size 0,50 mm² - 4,00 mm²
- Tin plated
- 50 mating cycles
- wide range of wire sizes
Part Number
Wire
Range
mm2
Description*
Loose
(100 )
Tin Plated
Wire
Size
Reeled
(3000)
Tin Plated
Contact
Insulation
Diameter
Strip Length
0,05 - 1,00
20-18 AWG
Pin
APK-PB25A10
031-8717-020
121668-0000
1,40 (.055) - 2,00 (.078)
5,00 (.196±0.25 (.009)
0,05 - 1,00
20-18
AWG
Socket
APK-SB25A10
031-8717-120
121668-0100
1,40 (.055) - 2,00 (.078)
5,00 (.196±0.25 (.009)
1,50 - 2,50
20-18
AWG
Pin
APK-PB25A25
031-8717-021
121668-0001
2,00 (.078) - 2,90 (.078)
5,00 (.196±0.25 (.009)
1,50 - 2,50
20-18
AWG
Pin
APK-PB25A15
031-8717-121
121668-0101
2,00 (.078) - 2,90 (.078)
5,00 (.196±0.25 (.009)
2,50 - 4,00
20-18
AWG
Pin
APK-PB25A40
031-8717-022
121668-0002
2,90 (.114) - 3,60 (.078)
5,00 (.196±0.25 (.009)
2,50 - 4,00
20-18
AWG
Pin
APK-PB25A40
031-8717-122
121668-0102
2,90 (.114) - 3,60 (.078)
5,00 (.196±0.25 (.009)
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
45
Cannon CA Industrial
Signal Contacts – T2P Currant Rating: 13A standard, 16A high conductivity (see derating)
Wire Size 0,50 mm² - 4,00 mm²
• Three plating styles available.
• Up to 200 mating cycles.
• Wide Range of wire sizes.
Formed (Stamped) Crimp Contacts Standard Brass Material
Wire
Range
mm2
0,14 - 0,25
0,14 - 0,25
0,32 - 0,50
0,32 - 0,50
0,75 - 1,50
0,75 - 1,50
0,50 - 2,50
0,50 - 2,50
Wire
Size
26-24
AWG
26-24
AWG
22-20
AWG
22-20
AWG
26-24
AWG
26-24
AWG
16-14
AWG
16-14
AWG
Part Number Pack (100)
Part Number Reeled (3000)
1um (40 u in.)
1um (40 u in.)
Contact
Tin
Plating
Gold
Flash
Gold
Plating
Tin
Plating
Gold
Flash
Gold
Plating
Pin
192990-0020
192990-0080
192900-0448
192990-0020
192990-0080
192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
Socket
192990-0030
192990-0090
192900-0452
192990-0020
192990-0080
192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
Socket
192990-0040
192922-1460
192900-0447
192990-0020
192990-0080
192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
Socket
192990-0050
192922-1470
192900-0451
192990-0020
192990-0080
192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
Pin
192990-0060
192990-0100
192900-0446
192990-0020
192990-0080
192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
Sicket
192990-0070
192990-0110
192900-0450
192990-0020
192990-0080
192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
Pin
192990-1240
192990-1220
192900-0445
192990-0020
192990-0080
192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
Socket
192990-1250
192990-1230
192900-0449
192990-0020
192990-0080
192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
Diameter
Strip
Length
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
46
Cannon CA Industrial
Acessories
Crimp Tools
Crimp Press Mecal TT
Equipped with the suitable mini applicator the TT Crimp Press can be used for
crimping T2P, APK25 and other contacts. The TT Crimping Press is available
either in semi-automatic (for bench-top use) configuration or in full automatic
configuration with integrated cut and strip machine (optional). The TT accepts
all the mini-style applicators fitted with the standard T-coupling. CFA - crimp
force analyser can be fitted as an option.
The semi-automatic configuration (for bench top use) always includes safety
cover, reel arm, foot switch according to the international safety standard and
CE regulation.
POWER
0.55 Kw (0.75 HP)
FORCE
2000 Kg (4450 lb)
STROKE
40 mm (1.57’’)
CRIMPING HEIGHT (Bottom Dead Center) 135.8 mm (5.34’’)
135.8 mm (5.34’’)
WEIGHT
41 Kg (95.6 lb)
DIMENSION (mm)
W 200 x H 580 x D 300
Nomenclature
Description
Part Number
Basic - press -TT
Crimp Machine
121586-5225
Crimp Tool Mini Applicator WWZ-EVS
Mini Applicators are interchangeable modules that will fit into many
standard crimping machines like the Mecal TT. They are available for all sizes
of stamped signal and power contacts.
Wire size
Contacts
Description
Part Number
0,14-0,50 mm²
T2P
WWZ – EVS
121586-5239
0,75-1,50 mm²
T2P
WWZ – EVS
121586-5217
1,50-2,50 mm²
T2P
WWZ – EVS
121586-5240
0,50-1,00 mm²
APK 25
WWZ – 20.100
121586-5128
1,50-2,50 mm²
APK 25
WWZ – 20.100
121586-5129
2,50-4,00 mm²
APK 25
WWZ – 20.100
121586-5130
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
47
Cannon CA Industrial
Ratcheted Hand Tool
A range of single action, factory calibrated tools are available to support the signal (T2P) and power
contacts (APK25) for the CA-I connector series.
Signal Contact
Power Contact
Part Number
14-16 AWG
N/A
*
14-18 AWG
N/A
121586-5237
20-22, 24-26 AWG
N/A
121586-5236
N/A
14-16, 18-20 AWG
112108-0012
*For details please consult factory.
Contact Removal Tools
Contacts can readily removed from the housings using an
extraction tool.
Removal tool for Signal contacts T2P:
The tool is placed over the contact and the sleeve rotated slightly
as it is pushed home to release the spring. Light pressure on the
knob then ejects the contact from the rear of the housing.
Nomenclature
Description
Part Number
Removal Tool T2P
Contact Removal Tool for T2P
192922-1450
Removal tool for Power contacts APK25:
The tool is placed over the contact and is pushed to release the spring.
Nomenclature
Description
Part Number
Removal Tool APK25
Contact Removal Tool for APK25
121086-3278
Testing Gauge
The Testing Gauge will be helpful to check whether a crimp is ok or not. The
contact should be inserted into the fixture without scratching the test hole
(diameter 3.3 mm)
Nomenclature
Description
Part Number
Testing Gauge
Testing Gauge for Crimp
317-8675-133
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
48
Cannon CA Industrial
Assembly Instructions
Preparation of cable
Stripping cable for T2P pin contact
The recommended stripping length of the stamped pin and socket
contact is 4, 5+/-0,3mm. The stripping of cable is carried out
with relevant stripping unit. Thereby the wire strands must not be
damaged.
Stripping cable for APK25 pin contact
The recommended stripping length of the stamped pin and socket
contact is 5, 3+/-0,3mm. The stripping of cable is carried out
with relevant stripping unit. Thereby the wire strands must not be
damaged.
Crimping Contact with hand tools:
1.) Strip wires to length (see Stripping Cables)
2.) Open hand tool and insert the contact in the selected crimp profile
3.) Position the stripped cable in the contact
4.) Press hand tool to end position
5.) Open hand tool and extract the contact, check the contact visually
-there shall be no loose strands out of the crimp section
-the contact must be crimped straight to the cable
-deformed contacts must not be used.
Comments:
Insulation of cable
Wire strands
Contact
Crimping contacts with automatic crimp press
The stamped contacts can be crimped with Hand tool or Mini-applicator (see Crimp Tool Mini
Applicator). For crimping instructions consult factory.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
49
Cannon CA Industrial
Stripping, shielded cable system
The stripping length for shielded cable has to be determined that the shielded cable is inside of the
grounding ring after assembly. The stripping of cable is carried out with relevant stripping unit.
Thereby the shielding braid must not be damaged.
The recommended stripping length for shielded braid is 40mm.
Crimping contacts to shielded cable system
Turn over braid and remove the protective foil if available.
Fix the shielding braid with tape for easier assemblystripping
single cables and crimp the contacts as described in the contact
assembly instruction.
Assembly of connector
Insert of pin and socket contacts:
The stamped contacts are pushed by hand into the cavity from the rear side of the connector An
insertion tool is not required. A “click” indicates that the contact is in the final position.
The contact can not be pulled back. Forwards the contact position is defined by a shoulder inside the
insulator.
PIN:
SOCKET:
PIN:
SOCKET:
Assembly of Endbell
Assembly Instructions for the endbell can be found in the specific assembly instruction of the endbell.
Please consult factory.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
50
Cannon CA Industrial
Part Number Index
026-0450-000 ......................16
026-0451-000 ......................16
029-0262-000 ......................16
029-0263-000 ......................16
029-8514-000 ......................16
029-8514-001 ......................16
029-8514-004 ......................16
031-8703-000 ................14, 17
031-8703-001 ................14, 17
031-8703-050 ..........14, 19, 20
031-8703-051 ..........14, 19, 20
031-8703-052 ............9, 19, 20
031-8703-054 ................19, 20
031-8703-055 ................19, 20
031-8703-100 ..................9, 17
066-8516-000 ......................14
066-8516-002 ......................14
120090-0114 ........................19
120-8551-000 ......................13
120-8551-001 ......................13
120-8551-002 ......................13
120-8551-005 ......................13
120-8551-006 ......................13
120-8551-007 ......................13
120-8551-100 ........................8
120-8551-101 ........................8
120-8551-102 ........................8
120-8551-308 ......................13
120-8551-309 ....................309
120-8551-310 ....................310
120-8552-000 ......................11
120-8552-001 ......................11
120-8552-002 ......................11
120-8552-005 ......................11
120-8552-006 ......................11
120-8552-007 ......................11
120-8552-100 ........................8
120-8552-101 ........................8
120-8552-102 ........................8
120-8552-200 ......................12
120-8552-201 ......................12
120-8552-202 ......................12
120-8552-305 ......................12
120-8552-306 ......................12
120-8552-307 ......................12
120-8552-308 ......................11
120-8552-309 ......................11
120-8552-310 ......................11
121086-3019 ........................22
121086-3020 ........................22
121086-3021 ........................22
121086-3022 ........................22
121086-3023 ........................23
121086-3025 ........................23
121086-3056 ........................22
121086-3057 ........................22
121086-3058 ........................22
121086-3059 ........................22
121086-3077 ........................22
121086-3078 ........................22
121086-3097 ........................25
121086-3098 ........................25
121086-3099 ........................25
121086-3179 ........................25
121086-3189 ........................25
121086-3191 ........................25
121086-3192 ........................25
121086-3202 ........................23
121086-3203 ........................23
121086-3207 ........................25
121086-3210 ........................24
121086-3225 ........................17
121086-3226 ........................25
121086-3228 ........................25
121086-3229 ........................25
121086-3232 ........................25
121347-0010 ........................14
121347-0020 ........................14
121348-0010 ........................14
121348-0020 ........................14
121347-0100 ..........................9
121348-0100 ..........................9
121586-0074 ........................23
121586-0076 ........................23
121586-0080 ........................22
121586-0085 ........................17
121586-0121 ........................25
121586-0122 ........................25
121586-0123 ........................25
121586-0124 ........................25
121586-5067 ........................19
121586-5068 ........................19
121568-5069 ........................19
121586-5214 ........................18
121586-5215 ........................18
121586-5216 ........................18
121586-5225 ........................18
121586-5229 ........................26
195-8508-000 ......................22
195-8508-001 ......................22
195-8508-002 ......................22
195-8508-003 ......................22
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
51
195-8508-004 ......................22
195-8508-005 ......................22
195-8508-006 ......................22
195-8508-007 ......................22
195-8508-008 ......................22
195-8508-009 ......................22
195-8508-013 ......................22
195-8508-014 ......................22
195-8508-015 ......................22
195-8508-016 ......................22
195-8508-017 ......................22
195-8508-018 ......................22
204-8501-002 ......................23
225-0093-000 ......................14
225-1012-000........................ 9
252-7015-003 ......................26
317-1397-000 ......................15
317-1398-000 ......................15
317-1399-000 ......................15
317-8588-000 ......................23
317-8657-000 ......................15
317-8657-002 ......................15
317-8666-002 ......................23
317-8666-005 ..................9, 23
317-8666-007 ......................23
330-8672-000 ................14, 17
330-8672-001 ................14, 17
330-8672-002 ..........14, 19, 20
330-8672-003 ..........14, 19, 20
330-8672-005 ................19, 20
330-8672-008 ................19, 20
330-8672-009................19 , 20
330-8672-100 ..................9, 17
351-1633-000 ......................15
351-1634-000 ......................15
351-1640-000 ......................15
351-1641-000 ......................15
970-8606-022 ......................26
995-0001-585 ......................19
WWZ-EVS-MSS ......................18
WWZ-EVS-SS-10 ....................18
WWZ-EVS-SS-20 ....................18
Cannon CA Industrial
Product Safety & Warranty
THIS NOTE MUST BE READ IN
CONJUNCTION WITH THE PRODUCT DATA
SHEET/CATALOG. FAILURE TO OBSERVE
THE ADVICE IN THIS INFORMATION
SHEET AND THE OPERATING CONDITIONS
SPECIFIED IN THE PRODUCT DATA SHEET/
CATALOG COULD RESULT IN HAZARDOUS
SITUATIONS.
of combustible materials and this may
release noxious fumes. Overheating may
not be visually apparent. Burns may result
from touching overheated components.
PC board and/or harnessing.
(ii) Temperature
3. HANDLING
All information given are temperature
limits. The operation temperature depends
on the individual application.
Care must be taken to avoid damage
(iii) Other important information
to any component parts of electrical
1. MATERIAL CONTENT AND PHYSICAL connectors during installation and use.
Although there are normally no sharp
FORM
edges, care must be taken when handling
Electrical connectors do not usually
certain components to avoid injury to
contain hazardous materials. They contain fingers. Electrical connectors may be
conducting and non-conducting materials damaged in transit to the customers, and
and can be divided into two groups.
damage may result in creation of hazards.
a) Printed circuit types and low cost audio Products should therefore be examined
prior to installation/use and rejected if
types which employ all plastic insulators
found to be damaged.
and casings.
Cannon continuously endeavors to improve
their products. Therefore, Cannon products
may deviate from the description, technical
data and shape as shown in this catalog
and data sheets.
b) Rugged, Fire Barrier and High Reliability
types with metal casings and either natural
rubber, synthetic rubber, plastic or glass
insulating materials. Contact materials
vary with type of connector and also
application and are usually manufactured
from either: Copper, copper alloys,
nickel, alumel, chromel or steel. In special
applications, other alloys may be specified.
Product Warranty
4.DISPOSAL
“Engineered for life” is a registered
trademark of ITT Industries, ©2005. All
other trademarks or registered trademarks
are property of their respective owners. All
data subject to change without notice.
ITT Cannon, a Division of ITT Industries, Inc.
manufactures the highest quality products
available in the marketplace; however
5.APPLICATION
these products are intended to be used
in accordance with the specifications in
Connectors with exposed contacts should
this publication. Any use or application
not be selected for use on the current
supply side of an electrical circuit, because that deviates from the stated operating
specifications is not recommended and
an electric shock could result from
2. FIRE CHARACTERISTICS AND ELECTRIC touching exposed contacts on an unmated may be unsafe. No information and data
contained in this publication shall be
connector. Voltages in excess of 30 V ac
SHOCK HAZARD
or 42.5 V dc are potentially hazardous and construed to create any liability on the
There is no fire hazard when the connector
part of Cannon. Any new issue of this
care should be taken to ensure that such
is correctly wired and used within the
voltages cannot be transmitted in any way publication shall automatically invalidate
specified parameters. Incorrect wiring
and supersede any and all previous issues.
to exposed metal parts of the connector
or assembly of the connector or careless
A limited warranty applies to Cannon
body. The connector and wiring should
use of metal tools or conductive fluids, or
products. Except for obligations assumed
be checked, before making live, to have
transit damage to any of the component
by Cannon under this warranty, Cannon
no damage to metal parts or insulators,
parts may cause electric shock or burns.
no solder blobs, loose strands, conducting shall not be liable for any loss, damage,
Live circuits must not be broken by
cost of repairs, incidental or consequential
lubricants, swarf, or any other undesired
separating mated connectors as this may
conducting particles. Circuit resistance and damages of any kind, whether or not
cause arcing, ionization and burning.
continuity check should be made to make based on express or implied warranty,
Heat dissipation is greater at maximum
contract, negligence or strict liability
certain that there are no high resistance
resistance in a circuit. Hot spots may
arising in connection with the design,
joints or spurious conducting paths.
occur when resistance is raised locally
manufacture, sale, use or repair of the
Always use the correct application tools
by damage, e.g. cracked or deformed
as specified in the Data Sheet/Catalog. Do products. Product availability, prices and
contacts, broken strands of wire. Local
delivery dates are exclusively subject to
not permit untrained personnel to wire,
overheating may also result from the use
our respective order confirmation form;
assemble or tamper with connectors. For
of the incorrect application tools or from
the same applies to orders based on
operation voltage please see appropriate
poor quality soldering or slack screw
development samples delivered. This
national regulations.
terminals. Overheating may occur if the
publication is not to be construed as an
ratings in the product Data Sheet/Catalog IMPORTANT GENERAL INFORMATION
offer. It is intended merely as an invitation
are exceeded and can cause breakdown
(i) Air and creepage paths/Operating
to make an offer. By this publication,
of insulation and hence electric shock. If
voltage. The admissible operating voltages Cannon does not assume responsibility or
heating is allowed to continue it intensifies depend on the individual applications and any liability for any patent infringements
by further increasing the local resistance
the valid national and other applicable
or other rights of third parties which
through loss of temper of spring contacts, safety regulations.
may result from its use. Reprinting
formation of oxide film on contacts
this publication is generally permitted,
For this reason the air and creepage path
and wires and leakage currents through
indicating the source. However, Cannon‘s
data are only reference values. Observe
carbonization of insulation and tracking
reduction of air and creepage paths due to prior consent must be obtained in all cases.
paths. Fire can then result in the presence
Incineration of certain materials may
release noxious or even toxic fumes.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
52
Cannon CA Industrial
ITT providing a comprehensive offering of connectivity solutions. In
addition to connector products, we provide a complete line of Aerospace
Controls, Industrial Process Products, and Motion & Control Products.
Control Technologies
ITT’s Control Technologies business has a global and extensive
portfolio of products in the energy absorption, motion control,
aerospace and general industrial markets. Products include:
aerospace fuel, hydraulic and other fluid valves, actuators,
switches, pumps; aircraft seat controllers/actuators, seat locks,
stowage bin dampers, interior vibration and acoustic isolators;
defense weapon shock management systems; missile control
dampers and vibration isolators; plasma shape-cutting products,
servo motors, drives; alternative fuel products; industrial shock
absorbers, heavy equipment isolators, temp/pressure switches,
regulators and actuators.
Industrial Process
ITT’s Industrial Process is a dynamic business that is growing and expanding globally and has an extensive portfolio of
leading edge technology in pumping systems, valves, control systems and services that has served customers in the oil and
gas, mining, chemical, power generation, biopharm, general industries markets and more for more than 160 years. The
Industrial Process product lines include: pumps, valves, monitoring and control systems, water treatment, and aftermarket
services for the chemical, oil and gas, mining, pulp and paper, power, and biopharmaceutical markets.
Motion Technologies
ITT’s Motion Technologies business develops, produces and
sells brake pads and friction materials for private and public
transportation markets and all the major transportation
manufacturing industries around the world. It also makes
high-quality and performance hydraulic shock absorbers and
suspension systems for street and racing cars, heavy and light
trucks, trailers, rail and industrial applications. It is also a
leading supplier of technological innovations in R&D services.
Its products include: shock absorbers, brake pads and friction
materials for the automotive and rail markets.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
53
Cannon CA Industrial
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
54
Cannon CA Industrial
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
55