Daylighting Controls
Let the Sun Be Your Guiding Light
™
HBA introduces the Zone5 Daylight Harvesting System, which combines all three daylighting approaches and controls
tailored to the specific and demanding needs of daylight harvesting applications. Daylighting controls like HBA’s Zone5
Harvesting System impact budgets by harnessing the sun’s power to reduce energy consumption. HBA’s solutions for
daylighting control include dimming, stepped dimming, and switching systems.
Dimming systems continuously adjust light output by signaling dimming ballasts, and stepped dimming offers the
advantages of full-range dimming without the expense of dimming ballasts. Lamps are either fully turned off or partially
turned off, depending on natural light levels.
Switching systems turn lighting OFF or ON in accordance with available natural light. With a lower initial cost than dimming
systems, switching systems are most often recommended for warehouses, storage areas, atrium, lobbies and parking
facilities, where non-stationary tasks are performed.
SAVE MONEY
INTUITIVE, EASY-TO-USE LCD MENU
Cut lighting costs by up to 75%. Master Off and Row Off functions
The two-line LCD interface is intuitive, easy-to-use and interactive.
can contribute to additional energy savings when users turn the
The interface allows users to quickly change system settings or
lights off ahead of the occupancy sensor detecting that the room
monitor system diagnostics in real time.
is empty.
FLEXIBILITY
SAVE TIME
All Zone5 switches can be ganged together to form custom switch
Zone5 controls are plug-and-play, eliminating wiring labor costs.
stations, maximizing flexibility in multi-use rooms. Color-coded
plug-and-play jumper cables are available to be ordered
USER-FRIENDLY PROGRAMMING
separately, making installation effortless.
SD Card interface provides a simple way to commission, log, verify
and update the Zone5 system. Control parameters can be copied
to the card from one Zone5 Control Module to another, email from
specifier or Zone5 PC-based template builder.
PA G E 6 6
( 8 8 8 ) 6 9 8 - 3 2 4 2 | FA X O R D E R S ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 67
HBA Zone5 Control Module
Option Board
DAYLIGHT HARVESTING CONTROLS
TITLE
24
CEC
COMPLIANT
CALIFORNIA
Dry Contact Terminal
120
277
Terminal Block
VAC
LCD Display
The HBA Zone5 Daylight Harvesting System features specialized controls tailored
to the specific and demanding needs of daylight harvesting applications. The HBA
Zone5 Control Module (ZCM) is the central controller of the system. It accurately
analyzes and interprets signals from Zone5 plug and play components, including
SD Card Interface
occupancy sensors, daylight sensors and low voltage switches to control both
General and A/V lighting. The ZCM supports up to 4 zones of lighting that can
be individually programmed for either daylight switching, stepped dimming or
General Specifications
User Interface
2-line LCD display
4 navigational buttons
SD Card interface – used for system settings, logging and firmware updates
Daylight Harvesting Options
For each zone
Switched
Stepped dimming
Full range dimming
None (Not Daylight Harvested)
Color Coded Low Voltage Ports
Uses standard RJ45 connectors
Plenum rated, low voltage system cabling (sold separately)
Blue – lighting control
Yellow – master and row control
Orange - 0-10V dimming
White – occupancy sensor
Green – daylight sensor
continuous dimming. A fifth zone for standard ON/OFF control of whiteboard
lighting is also supported.
The Zone5 Control Module features an intuitive menu driven LCD user interface
to program system settings, view system/device status, and perform system
diagnostics and testing. The ZCM features an SD card interface that can be used to
save system settings and copy them to another controller, cutting down on the time
required to commission multiple systems. Each Zone5 input device is equipped
Z5-CM
with color coded plug and play connectors which snap into the corresponding
port on the ZCM.
PRODUCT FEATURES
DAYLIGHT
HARVESTING
•
Supports up to five zones of lighting control
•
Daylight switching, stepped dimming or continuous dimming – per zone for four zones
Controls both General and A/V lighting
•
Whiteboard lighting control
•
Intuitive menu-driven LCD user interface
•
Seamless integration with Zone5 sensors and lighting control switches
•
SD card interface for saving and loading system settings
•
Event logging
•
Contractor-friendly, color coded plug and play installation
•
UL and cUL listed
•
Five-year warranty
Dry contact input
Electrical
Each Zone (1-4)
1 relay: general lighting
1 relay: A/V lighting
Dimming: 0-10V, capable of controlling up to 50 low voltage, 2-wire, 0-10V dimming ballasts
Additional relay for whiteboard lighting
Switched output per relay
15A tungsten (120v only,) 20A magnetic ballast,
16A electronic ballast
Maximum combined output not to exceed 20A
Dimension
4”W x 12”H x 15”D
0-10V
DIMMING
Lighting Control
Switch Ports
•
Demand Response
Master/ Row
Control
Ports
12”
Dimming Control
Ports
Weight
20.75 lbs
Certifications
UL and cUL listed
Warranty
Five-year limited
Ordering Information
Z5-CM
Occupancy Sensor
Ports
Z5-CM
Daylight Sensor
Ports
MODEL
Zone5 Control Module
15”
4”
PA G E 6 8
hubbell-automation.com
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 6 9
32'
23'
HBA Zone5 Ceiling and Wall Mount Occupancy Sensors
22'
32'
23'
12'
23'
32'
CALIFORNIA
CEC
US Minor Motion
IR Minor Motion
US Major Motion
IR Major Motion
US Minor Motion
IR Minor Motion
US Major Motion
IR Major Motion
32'
23'
20'
24
23'
32'
VDC
VOLTAGE
45'
64'
The HBA Zone5 Ceiling Mount and Wall Mount Occupancy Sensors combine
PIR
Sensor
ultrasonic (US) and passive infrared (PIR) technologies to turn lighting on and
US Minor Motion
IR Minor Motion
off based on occupancy. This dual technology provides accurate turn-ons while
US Major Motion
IR Major Motion
virtually eliminating false-offs.
Ultrasonic
Sensors
Z5-OS-OMNIDT2000RP Range Diagram
These sensors feature Hubbell Building Automation’s patented IntelliDAPT®
technology, which makes all the sensor adjustments automatically. Throughout
makes digital adjustments to sensitivity and timer settings. Occupancy sensors
1.5”
4.5”
with IntelliDAPT provide a maintenance-free install-and-forget operation.
OCCUPANCY
SENSING
DAYLIGHT
HARVESTING
Z5-OS-LODTRP Range Diagrams
LED Lamp
Red – infrared motion
Green – ultrasonic motion
Timer Timeout
Automatic mode: 8 – 30 min. (self adjusts based on occupancy)
Test mode: 8 seconds (for an easy check at installation)
Ultrasonic (US) Output
Operating frequency: 32 kHz
Passive Infrared (PIR)
Dual-element pyrometer and 12-element cylindrical rugged lens
Form C Relay
Relay: N/O + N/C contacts; SPDT; 500 mA rated @ 24VDC; three-wire isolated relay
Coverage
Ceiling mount sensor: 2,000 square feet
Wall mount sensor: 1,600 square feet
Power Requirements
24VDC, 33mA Power and 24VDC active high-logic output control signal provided through plenum rated
CAT5 plug-and-play cable (ordered separately)
Operating Environment
Indoor use only
Operating temperature: 32° to 104°F (0° to 40°C)
Relative humidity (non-condensing): 0% to 5%
Construction
Casing – rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UV-945VA) flame class rating,
UV inhibitors
•
Occupancy Sensors for Zone5 Daylight Harvesting System
•
IntelliDAPT self-adaptive technology – no manual adjustment required
OMDT2000RP Dimensions
4.5” diameter, 1.5” height (114 mm diameter, 38mm height)
•
All-digital dual technology (ultrasonic [US] and passive infrared [PIR]) sensors
Weight
5.0 oz (142g)
•
Non-volatile memory for sensor settings
LODTPRP Dimensions
6.58”H x 3.63”W x 3.72”D
•
1,600 and 2,000 square-foot coverage area
Weight
5.0 oz (142g)
•
Form C relay with N/O + N/C outputs
•
Color coded, plug and play installation
UL and cUL listed
•
Five-year limited warranty
IR Major Motion
Auto reset from test setting
Self-adjusting timer
Self-adjusting ultrasonic and passive infrared thresholds
Automatic false-on/ false-off corrections
IntelliDAPT
3.63”
IR Minor Motion
US Major Motion
IntelliDAPT Technology
Z5-OS-OMDT2000RP
PRODUCT FEATURES
US Minor Motion
General Specifications
the product’s lifespan, IntelliDAPT software analyzes the controlled area and
•
40'
32' 23'
LOW
COMPLIANT
24
20'
20'
23'
32'
DAYLIGHT HARVESTING CONTROLS
TITLE
40'
Color
Off-white
Mounting
Mounting base provided
Recommended mounting height: 8ft with a max mounting height of 12ft.
PIR
Sensor
6.58”
Certifications
UL and cUL listed
Warranty
Five-year limited
Ordering Information
Ultrasonic
Sensors
3.72”
Z5-OS-OMDT2000RP
Z5-OS-LODTRP
PA G E 7 0
hubbell-automation.com
Z5-OS-LODTRP
MODEL
Zone5 Occupancy Sensor, Ceiling Mount,
PIR and Ultrasonic, Form C Relay,
2000 Sq. Ft.
Zone5 Occupancy Sensor, Wall Mount, PIR
and Ultrasonic, Form C Relay, 1600 Sq. Ft.
CAT5 Cable Sold Separately
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 71
HBA Zone5 Low Voltage Wall Switches
TITLE
24
CEC
LOW
COMPLIANT
CALIFORNIA
DAYLIGHTING CONTROLS
24
VDC
General Specifications
VOLTAGE
Power Requirements
Each switch: 100mA @ 30VDC Max – Provided by Zone5 low voltage color coded plug and play cable (ordered separately)
Master/Row control switches: Use with yellow cable
Lighting Control Switches: Use with blue cable
Operating Environment
Indoor use only
Operating temperature: 32°to 122°F (0° to 50°C)
Relative humidity (non-condensing): 10% to 90%
Construction
Housing – Rugged, high-impact, injection-molded plastic
Dimensions
4.2”H x 1.6”E x 1.4”D
to switch between General Lighting and Audio Visual Lighting, a General – A/V
Weight
1.6 oz
lighting dimming switch that raises and lowers light levels in both modes, a
Color
White
whiteboard lighting switch that can control up to two independent whiteboard
Mounting
Switches may be mounted individually in a single gang switch box or ganged together in a
multi-gang switch box
NOTE: When ganging multiple switches make sure the switches are of the same color-coded type.
Decorator-style wall plates available separately
Warranty
Five-year limited
The HBA Zone5 Low Voltage Wall Switches provide manual control of the HBA
Zone5 Daylight Harvesting System. The Zone5 system consists of two types of
switches – Lighting Control Switches and Master/Row Control Switches.
The Lighting Control Switches include a General – A/V switch that enables users
lights, and a Study Time switch that provides uninterrupted lighting during periods
of low activity. The Master/Row Control Switches include a Master ON/OFF switch
Z5-SW-GAV
Z5-SW-ST
that turns all lighting ON or OFF, and individual Row (1 – 4) ON/OFF switches that
control each row of lighting individually. All Zone5 switches are color coded and
provide CAT5 plug and play installation to the Zone5 Control Module
PRODUCT FEATURES
•
Supports up to 4 zones of lighting control
•
Attractive, architecturally pleasing design
•
General – A/V lighting control with optional dimming control
•
Whiteboard lighting control
•
Master and individual row ON/OFF control
•
Color-coded, plug and play installation
•
All switches mount to standard single or multi-gang wall boxes
•
Multi-gang wall plates available
•
Five-year warranty
1.6”
Fits Standard
Decorator Style
Wallplate
(sold separately)
On/Off
Switches
4.2”
Ordering Information
LIGHTING CONTROL SWITCHES
AND CABLES
Z5-SW-GAV
Zone5 General - A/V Mode
Switch, White
Z5-SW-AVD
Zone5 General - A/V
Dimming Switch, White
Z5-SW-ST
Zone5 Study Time Switch,
White
Z5-SW-WB
Zone5 Whiteboard Switch,
White
CAT5-50F-BL
Zone5 Cable for Lighting
Control Switches, 50ft, Blue
CAT5-100F-BL Zone5 Cable for Lighting
Control Switches, 100ft, Blue
CAT5-3IN-BL
Zone5 Jumper Cable for
Lighting Control Switches,
3 inches, Blue
MASTER/ROW CONTROL SWITCHES
AND CABLES
Z5-SW-MC
Zone5 Master ON/OFF
Switch, White
Z5-SW-RCR1
Zone5 Row 1 Control Switch,
White
Z5-SW-RCR2
Zone5 Row 2 Control Switch,
White
Z5-SW-RCR3
Zone5 Row 3 Control Switch,
White
Z5-SW-RCR4
Zone5 Row 4 Control Switch,
White
CAT5-50F-YL
Zone5 Cable for Master/Row
Control Switches, 50ft, Yellow
CAT5-100F-YL Zone5 Cable for Master/Row
Control Switches, 100ft, Yellow
CAT5-3IN-YL
Zone5 Cable for Master/Row
Control Switches, 3 inches,
Yellow
WALL SWITCH PLATES
Z5-WP-1G-WH Zone5 Wall Switch
Plate, Decorator Style,
1-gang, White
Z5-WP-2G-WH Zone5 Wall Switch
Plate, Decorator Style,
2-gang, White
Z5-WP-3G-WH Zone5 Wall Switch
Plate, Decorator Style,
3-gang, White
Z5-WP-4G-WH Zone5 Wall Switch
Plate, Decorator Style,
4-gang, White
Z5-WP-5G-WH Zone5 Wall Switch
Plate, Decorator Style,
5-gang, White
1.4”
Z5-SW-MC
PA G E 7 2
hubbell-automation.com
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 7 3
RJ45 Adapter and CAT5 System Cables
DAYLIGHTING CONTROLS
LOW
24
Ordering Information
VDC
VOLTAGE
RJ45 Adapter
Hubbell Building Automation’s RJ45 Adapter and CAT5 system cables are
designed to be used with HBA low voltage occupancy and daylight sensors. The
adapter replaces the Quick-To-Install™ (QTI) connectors previously used by the
wiHUBB® and Zone5™ occupancy and daylight sensors and enables devices to
connect to HBA control modules (e.g. wiHUBB Smart Pack, Zone5 Control Module,
MODEL/DESCRIPTION
RJ45ADAPTER
RJ45ADAPTER-10
RJ45ADAPTER-50
RJ45 Adapter for wiHUBB & Zone5 Occupancy and Daylight Sensors
RJ45 Adapter for wiHUBB & Zone5 Occupancy and Daylight Sensors - 10 Pack
RJ45 Adapter for wiHUBB & Zone5 Occupancy and Daylight Sensors - 50 Pack
CAT5 System Cables
etc) using standard CAT5 cable.
MODEL/DESCRIPTION
RJ45Adapter
PRODUCT FEATURES
•
•
•
Supports Zone5 occupancy and daylight sensors
Plenum rated
Five-year limited warranty
General Specifications
Electrical
4 Terminal Connections
- Red: +24V
- Blue: Occupancy Sensor Input
- Yellow: Photocell/Daylight Sensor Input
- Black: Common
Class 2 device
Max Cable Length Supported: 300-ft from device to control module
Plenum Rated
Complies with requirements for use in a plenum area
Construction
Material: SABIC NORYL HS2000X
Dimensions
Weight
2.168”L x 1.093”W x 0.995”H
0.8 oz
Color
Gray
Mounting
Adapter may be mounted using a zip-tie (not included) or with a #8 or #10 mounting screw (not included)
Warranty
Five-year limited
PA G E 74
hubbell-automation.com
CAT5-3IN-BL
CAT5 Jumper Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 3in, Blue
CAT5-10F-BL
CAT5 Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 10ft, Blue
CAT5-50F-BL
CAT5 Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 50ft, Blue
CAT5-100F-BL
CAT5 Cable for wiHUBB & Zone5 Lighting Control Switches, Plenum Rated, 100ft, Blue
CAT5-10F-WH
CAT5 Cable for wiHUBB & Zone5 Occupancy & WASP2 Sensors, Plenum Rated, 10ft, White
CAT5-50F-WH
CAT5 Cable for wiHUBB & Zone5 Occupancy & WASP2 Sensors, Plenum Rated, 50ft, White
CAT5-100F-WH
CAT5 Cable for wiHUBB & Zone5 Occupancy & WASP2 Sensors, Plenum Rated, 100ft, White
CAT5-10F-GN
CAT5 Cable for wiHUBB & Zone5 Daylight Sensors, Plenum Rated, 10ft, Green
CAT5-50F-GN
CAT5 Cable for wiHUBB & Zone5 Daylight Sensors, Plenum Rated, 50ft, Green
CAT5-100F-GN
CAT5 Cable for wiHUBB & Zone5 Daylight Sensors, Plenum Rated, 100ft, Green
CAT5-3IN-YL
CAT5 Jumper Cable for Zone5 Master/Row Control Switches, Plenum Rated, 3in, Yellow
CAT5-50F-YL
CAT5 Cable for Zone5 Master/Row Control Switches, 50ft, Yellow
CAT5-100F-YL
CAT5 Cable for Zone5 Master/Row Control Switches, 100ft, Yellow
SPECIAL NOTES:
1. When cutting CAT5 cable to specific lengths, the cable pin out is as follows:
PIN NO.
1
2
3
4
5
6
7
8
WIRE COLOR
WHITE with ORANGE STRIPE
ORANGE
WHITE with GREEN STRIPE
BLUE
WHITE with BLUE STRIPE
GREEN
WHITE with BROWN STRIPE
BROWN
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 7 5
HBA Zone5 Daylight Sensor
ZONE5 SYSTEM ARCHITECTURE
TITLE
24
CEC
LOW
COMPLIANT
CALIFORNIA
DAYLIGHT HARVESTING CONTROLS
24
VDC
VOLTAGE
The HBA Zone5 Daylight Sensor provides the necessary daylight-level information
to the Zone5 Control Module (ZCM). Using a photodiode element, this sensor
continuously measures daylight levels and sends the information to the ZCM for
daylight harvesting with lighting in the General (GEN) lighting mode. The daylight
sensor supports multiple foot-candle ranges which can be used in normal, skylight
or atrium lighting applications.
Z5-DS
PRODUCT FEATURES
DAYLIGHT
HARVESTING
•
Indoor daylight sensor for Zone5 Daylight Harvesting System
•
Architecturally attractive design
•
Open loop operation
•
Foot-candle range: 3-6,000FC
•
Mounts vertically or horizontally
•
Color coded, plug-and-play installation
•
UL and cUL listed
•
Five-Year Warranty
General Specifications
Electrical
Three jumper-selectable foot-candle ranges: 3-300fc; 30-3,000fc; 60-6,000fc
24VDC Power provided through plenum rated CAT5 plug and play cable (ordered separately)
Construction
Protective hard plastic cover and housing
Dimension
2”DIA, 1.2”H
Certifications
UL and cUL listed
Warranty
Five-year limited
Ordering Information
Z5-DS
Z5-DS
PA G E 76
MODEL
Zone5 Daylight Sensor
hubbell-automation.com
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 7 7
Continuous Dimming Control
DAYLIGHTING CONTROLS
LOW
24
VDC
VOLTAGE
Hubbell Building Automation’s DLC7 is the ideal system for providing continuous
closed loop dimming control for 2-wire 0 -10V dimming ballasts and LED dimmable
drivers based on natural daylight. This control maintains constant, undisturbed,
light levels during peak use times. Through continuous monitoring of ambient
light levels, the DLC7 dims the associated lighting fixtures to a user’s predefined
foot-candle setting. The DLC7 dimming photocell provides precise control of the
DLC7
General Specifications
actual amount of lighting on the work surface (e.g. desktop, floor) within its field
Accuracy
+/-1% @ 70°F (21°C);
Derated to +/-5% when above 120°F or below 50°F (18° to 49°C)
of view. Measured light levels are converted into a linear, proportional, analog
Operating Environment
-13°F to 140°F (-11°C to 60°C)
voltage that controls the ballast or LED driver dimming range. This achieves
Sensitivity Ranges
0–500FC
maximum energy savings by efficiently blending natural and artificial light to
Adjustment Range
10–140FC
Input Voltage
10V (supplied by ballast or LED driver)
Current
Sink up to 25mA
Output Voltage
1V (light) - 10 V (dark)
or LED driver. The sensor also provides a short and long delay. The short delay
Wire Leads
22 gauge
Gray and violet to the Advance ballast
White-green 2-wire loop cut for 10-second delay. Leave intact for 20-second delay to ballast
provides faster sensor response. The long delay slows the sensor response and
Sensor Type
Blue enhanced photodiode
maintains a more stable signal to the ballast or LED driver, accomodating for brief
Dimensions
Weight
Base diameter: 2.00”
Sensor diameter: 1.29”
Height: 1.23”
1.2 oz.
Mounting
Mounting hole: 3/8”
Mounting medium: 3M™ double adhesive tape
Construction
Sensor housing meets flame-retardant requirements of UL standard 94HB
Certifications
ETL/UL 916
Warranty
Five-year limited
maintain a comfortable visual environment.
The sensor head adjustment sets the maximum output of the controlled ballast
changes in light due to passing clouds.
PRODUCT FEATURES
DAYLIGHT
HARVESTING
•
Controls 2-wire 0 -10V dimming ballasts and LED drivers
•
Light-sensitivity range of 0–500FC
•
Selectable 3- or 8-second dimming rate
•
Multiple calibration options
•
Low-profile design
•
Five-year limited warranty
0-10V
DIMMING
Ordering Information
DLC7
Commisioning
Port
1.23”
DLC7
MODEL
Continuous Dimming Control
2.00”
PA G E 7 8
hubbell-automation.com
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 7 9
Daylighting Control Photocell Sensors
TITLE
24
CEC
COMPLIANT
CALIFORNIA
DAYLIGHTING CONTROLS
LOW
24
VDC
VOLTAGE
Correct orientation shown
Hubbell Building Automation’s daylighting control photocell sensors (DLCPCI,
DLCPCO, DLCPCA and DLCPCS) provide indoor, outdoor, or skylight control of
lighting circuits based on natural daylight. The DLCPC sensors and controller are
2.00”
able to provide coverage for any application. The DLCPC sensors are used in
different locations in and around a building. Indoor sensors are used in offices and
classrooms. Outdoor sensors detect light for sign and site illumination control.
General Specifications
Atrium sensors measure light in lobbies. Skylight sensors read the ambient light
2.00”
available in warehouse skylights.
DLCPCI
Each sensor has a different range and focus of the light being measured. The
Accuracy
+/-1% at 70°F (21°C Derated to +/-5% at 120°F or at) F (-18°C to 49°C)
Operating Temperature
13°F to 140°F (-11°C to 60°C)
Sensor Type
Blue-enhanced photo diode
Sensor Ranges
Housing Minimum Adjustable Maximum
DLCPCI Indoor
50-750FC
DLCPCO Outdoor 50-750FC
DLCPCA Atrium
200-2,500FC
DLCPCS Skylight 1,000-7,500FC
sensor sensitivity is adjustable. Model measurements ranges include 750, 2,500
2.50”
1.75”
or 7,500FC. The indoor sensor has a flat Frensal lens that looks downward in a
60-degree cone of referance to measure acutal light on the work surface. The
Input Voltage
24VDC
outdoor sensor is enclosed in a weatherproof housing with a visor for shading and
Output Voltage
10V full output
lens protection. The Atrium and Skylight sensors both use diffusing dome lenses
Output Offset
0VDC or 1VDC - total darkness
to provide a 180-degree angle of photodiode reposnse.
Wiring
Three conductors 18-gauge standard cable
Red: Pos. DC input
Black: DC common
Yellow: Output to EMS
Certifications
ETL/UL 916 Listed
Title 24 Listed
RoHS compliant
Warranty
Five-year limited
DLCPCO
PRODUCT FEATURES
•
Multiple sensor options available
•
Interfaces with Energy Management Systems
•
Five-year limited warranty
DAYLIGHT
HARVESTING
Ordering Information
MODEL
DLCPCI
DLCPCO
DLCPCA
DLCPCS
2.75”
Indoor Photocell Sensor, 50 - 750FC
Outdoor Photocell Sensor, 50 - 750FC
Atrium Photocell Sensor, 200 - 2500FC
Skylight Photocell Sensor, 1000 - 7500FC
1.75”
DLCPCA
PA G E 8 0
DLCPCS
hubbell-automation.com
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 8 1
Photocell Controller
TITLE
COMPLIANT
CALIFORNIA
DAYLIGHTING CONTROLS
LOW
24 24
CEC
VDC
VOLTAGE
Hubbell Building Automation’s DLCPCC is the ideal system for providing indoor,
outdoor, or skylight control of lighting circuits based on daylight. The DLCPCC
lighting controller automatically switches a dry contact in response to changes in
natural light levels. The DLCPCC provides a maintained single pole, double throw
“Form C” relay output to drive electrically-held contactors or relays, or inputs
to Building Automation Systems. The low voltage controller requires a remotely
mounted photoconductive (PC) sensor (sold separately).
Accuracy
+/- 1 percent at 70°F (21°C) Derated +/- 5 percent above 120°F or below 0°F (49°F / -18°C)
Sensor Type
CD S Photoconductive 2 wire
The DLCPCC continuously compares the remote sensor’s signal against the LOW
Power Requirements
24VAC or 24VDC standard
and HIGH light level set points. When the sensor detects decreasing light levels
Dead Band
Adjustable: 5-95%
Indicators
Red High and Low LEDs
Input Delay
Standard 30-second sensor (removable for adjustment)
light levels increase and the sensor’s signal matches the HIGH set point, the lights
Control Inputs
Photoconductive Sensor Calibration / Simulator (for optional DLCSIMM)
are switched OFF. The LOW and HIGH set points are separated by a “deadband.”
Output
Standard form C SPDT relay 10A resistive
This prevents the DLCPCC from switching light levels between set points, thus
Operating environment
Operating Temp: -13°F to 140°F (-11°C to 60°C)
Indoor use only
Construction
Sensor is mounted on a wall switch faceplate
Dimensions
4.75”h x 2.5”w x 1.5”D
that corresponds with the LOW set point, the lights are switched ON. Conversely, as
DLCPCC
General Specifications
eliminating nuisance or intermittent changes.
ColorWhite
Warranty
PRODUCT FEATURES
Five-year limited
DAYLIGHT
HARVESTING
Ordering Information
•
Adjustable on/off set points
•
Dual power unit input: 24VAC or 24VDC
•
Flexible control options
•
Input time delay
•
Two set points available for separate on and off levels
•
Five-year limited warranty
DLCPCC
MODEL
DLCPCC
Photocell Controller
4.75”
1.5”
2.5”
PA G E 8 2
hubbell-automation.com
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 8 3
Luxstat Dimming Control Module
TITLE
24
CEC
COMPLIANT
CALIFORNIA
DAYLIGHTING CONTROLS
LOW
24
VDC
VOLTAGE
Using a unique Open Loop control algorithm, the Luxstat Dimming Control Module
by Servodan provides continuous dimming daylight harvesting control to an area. The
lights dim when there is enough daylight, and they brighten when there is not enough
daylight. Instead of measuring the light already inside an area, this module measures
the amount of daylight entering an area.
During installation, lighting levels (without artificial lighting) are measured at task
height for each of the 3 zones. The controller adjusts each of the zones independently
to maintain the desired lighting levels within each space while taking advantage of
available natural daylight. The Luxstat Dimming Control Module is part of a daylight
LUXSTATDCM
harvesting system that includes the Luxstat Light Sensor and the Luxstat Power Pack.
Electrical
Class 2
This control module can work with occupancy sensors and manual wall switches to
Supply Voltage
LUXSTATPP Power Pack: 24 VDC
provide a diverse lighting solution for classrooms and meeting rooms.
Operation
Control output voltage to ballasts: 0–10V
Programmable Features
Minimum output setting: 0–4V
Maximum output setting: 6–10V
Fade and ramp rate: 5–60 seconds
Cut off delay: 0–20 minutes or infinity
Maximum sink: 50mA per channel
Maximum source: 3mA per channel
Maximum ballasts: 50 per channel
Dimensions
3.54”H x 2.75”W x 2.36”D
Certifications
UL and cUL listed
Warranty
Five-year limited
PRODUCT FEATURES
DAYLIGHT
HARVESTING
•
Open Loop continuous dimming daylight harvesting control
•
Pushbutton programming
•
Automated setup
•
LCD display provides “Real Time” light-level readings
•
5 pre-programmed applications
•
Continuous dimming control—choose from 1, 2, or 3 zones
•
Individual adjustment for each channel of control
•
Compatible with 2-wire 0 - 10V dimming ballast or LED drivers
•
Integration with occupancy sensors and manual override controls
•
DIN rail mounting
•
Title 24 compliant
•
UL and cUL listed
•
Five-year limited warranty
PA G E 8 4
General Specifications
0-10V
DIMMING
2.75”
Ordering Information
LUXSTATDCM
Display
MODEL
LUXSTATDCM
3.54”
Luxstat Dimming Control Module, 24V DC
Navigation
Buttons
2.36”
hubbell-automation.com
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 8 5
Luxstat ON/OFF Control Module
TITLE
24
CEC
LOW
COMPLIANT
CALIFORNIA
DAYLIGHTING CONTROLS
24
VDC
VOLTAGE
The Luxstat ON/OFF Control Module by Servodan provides multilevel ON/OFF
daylight harvesting control by using a unique Open Loop control algorithm. The
lights turn off when there is enough daylight, and they turn on when there is not
enough daylight. Instead of measuring the light already inside of an area, this
module measures the amount of daylight entering an area. During installation,
lighting levels (without artificial lighting) are measured at task height for each of
the 3 zones. When daylight is adequate, the controller switches lighting off. When
daylight is below the desired level, the control module switches lighting back on.
The ON and OFF delays for each channel are individually adjustable.
The Luxstat ON/OFF Control Module is part of a daylight harvesting system that
General Specifications
includes the Luxstat Light Sensor and the Luxstat Power Pack. The control module
Electrical
can work with occupancy sensors and manual wall switches to provide a diverse
Supply Voltage
LUXSTATPP Power Pack: 24VDC
lighting solution for classrooms and meeting rooms.
Programmable Features
Photocell range: 3–6000FC
Set point range: 5–60 foot-candles
Programmable deadband: 10%–80%
Adjustable ON delay: 5–60 seconds
Adjustable OFF delay: 3–60 minutes
Load shed set point: 5–60FC
Dimensions
3.5”H x 2.8”W x 2.5”D
Certifications
UL and cUL listed
Warranty
Five-year limited
Class 2
LUXSTATOCM
PRODUCT FEATURES
DAYLIGHT
HARVESTING
•
Open Loop ON/OFF daylight harvesting control
•
Pushbutton programming with automated setup
•
LCD display provides “Real Time” light level readings
•
5 pre-programmed applications—fit most applications without complicated setup
•
Multilevel switching—choose from 1, 2, or 3 zones
•
Individual adjustment for each channel of control
•
Adjustable ON and OFF delays
•
Integration with occupancy sensors and manual override controls
•
DIN rail mounting
•
Title 24 compliant
•
UL and cUL listed
•
Five-year limited warranty
PA G E 8 6
2.75”
Ordering Information
LUXSTATOCM
Display
MODEL
LUXSTATOCM
Luxstat On/Off Control Module, 24V DC
3.54”
Navigation
Buttons
2.36”
hubbell-automation.com
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 8 7
Luxstat Power Pack
TITLE
24
CEC
COMPLIANT
CALIFORNIA
DAYLIGHTING CONTROLS
120
277
VAC
LOW
24
VDC
VOLTAGE
The Luxstat Power Pack by Servodan powers the Luxstat ON/OFF Control Module
and the Luxstat Dimming Control Module. It supplies low-voltage power to the
control modules via a quick connect cable and has 3 normally open relays (ON/
OFF switches controlled by a circuit) to switch line voltage in response to signals
from the connected controller.
Additionally, the power pack has an automatically resetting fuse. If the current
drawn from the power pack exceeds the specifications, the +24VDC output and
General Specifications
the LED will turn off. When the problem and the primary power are removed, the
Voltage
120/277VAC, 50/60 Hz—single phase
power pack will restore power.
Secondary Power
1,000 mA @ 24VDC
Relays
3 normally open relays (620 A @ 120 or 277VAC)
Dimensions
2.76”W x 3.57”H x 2.36”D
Certifications
UL and cUL listed
Warranty
Five-year limited
LUXSTATPP
Ordering Information
PRODUCT FEATURES
LUXSTATPP
•
Provide power to operate Luxstat daylight harvesting control modules
•
3 individually controlled relays for ON/OFF control
•
120/230/277VAC transformer
•
Quick connect to Luxstat daylight harvesting control modules
•
DIN rail mounting
•
UL listed
•
California Title 24 Compliant
•
Five-year limited warranty
LUXSTATPP
MODEL
Luxstat Power Pack for
Luxstat Control Modules
2.76”
3.57”
2.36”
PA G E 8 8
hubbell-automation.com
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 8 9
Luxstat Single Zone On/Off Control Module
TITLE
24
CEC
COMPLIANT
CALIFORNIA
DAYLIGHTING CONTROLS
120
277
General Specifications
Electrical (Input)
LUXSTATOCMIZ120: 120VAC
LUXSTATOCMIZ277: 277VAC
Load: Max 40mA
Power Consumption: Approximately 2W
Signal from Light Sensor: 0-10V
Electrical (Output)
Relay Contact: N/O, 10mA
Load:
Incandescent Lamps – 1200W
Fluorescent – 620VA
Halogen Incandescent – 500W
Secondary Voltage: 24VDC
Performance
FC Range: 0.3 – 30FC; 3-300FC; 30-3000FC
Setting Range: 0.3-27FC; 3-270FC; 30-2700FC
OFF Delay: 0-60 minutes
daylight and transmits this data to the Luxstat Single Zone ON/OFF Control
Operating Environment
Temperature range: 41°F to 122°F (+5°C to +50°C)
Module. When daylight is adequate, the controller switches lights off. When
Dimensions
3.54”H x 2.81.”W x 2.5”D
daylight diminishes below the desired set point, the control module switches
Mounting
DIN Rail
Accessories
IndoorLight Sensor – LUXSTATLS
Outdoor Light Sensor - LUXSTATLSO
LUXSTAT 1-Button Momentary Switch - LUXSTATSW1WH or LUXSTATSW1IV
Certifications
UL and CE Listed
Warranty
Five-year limited
VAC
The Luxstat Single Zone ON/OFF Control Module by Servodan provides single
zone ON/OFF Daylight Harvesting control utilizing a unique Open Loop control
algorithm. Instead of measuring the light inside of the space the control module
measures the amount of daylight entering the space. During installation, lighting
levels, without artificial lighting, are measured at task height for the zone to be
controlled. The level is then input into the control module. The photocell measures
lighting back on. The OFF delay for the zone is adjustable.
LUXSTATOCM1Z
The Luxstat Single Zone ON/OFF Control Module is part of a Daylight Harvesting
system that includes the Luxstat Light Sensor. The control module can also
integrate with occupancy sensors and manual control wall switches .
Ordering Information
PRODUCT FEATURES
DAYLIGHT
HARVESTING
•
Open Loop ON/OFF Daylight Harvesting control
•
Pushbutton programming
•
LCD display provides Real Time light level readings
•
3 to 3000FC Range
•
Single-zone switching
•
Adjustable OFF delay
•
Integration with occupancy sensors and manual override controls
•
DIN rail mounting
•
UL listed
•
California Title 24 Compliant
•
Five-year limited warranty
LUXSTATOCM1Z120
LUXSTATOCM1Z277
2.81”
MODEL
Luxstat Single Zone On/Off Control Module
120VAC
Luxstat Single Zone On/Off Control Module
277VAC
Display
3.54”
Navigation
Buttons
2.5”
PA G E 9 0
hubbell-automation.com
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 9 1
Luxstat Day/Night Control Module with Clock
PIR
Lux
NPN
0-10V
1
2
4
1
2
3
TITLE
24
CEC
COMPLIANT
CALIFORNIA
DAYLIGHTING CONTROLS
120
277
B
12
36-080
VAC
The Luxstat Day/Night Control Module by Servodan provides single zone ON/OFF
3
45
B
Minilux Control
Lux Lux
range on
Off
delay Test
AppI n
Out
Mode
Set +
Test
Set -
daylight harvesting control utilizing a unique Open Loop control algorithm. In the
evening, when daylight diminishes below the desired ON set point, the control
CC
module switches lighting on. In the morning, when daylight reaches the desired
D1
1
23
23
D
L
OFF set point, lighting is switched off.
N
The controller’s integrated clock function switches off lighting completely during
a pre-defined period. Switching off lighting during the late evening/early morning
General Specifications
means more energy savings. The controller also features pushbutton programming
Electrical (Input)
LUXSTATDNCM120: 120VAC
LUXSTATDNCM277: 277VAC
Load: Max 40mA
Power Consumption: Approximately 2W
Signal from Light Sensor: 0-10V
Electrical (Output)
Relay Contact: N/O, m10A
Load:
Incandescent Lamps – 1200W
Fluorescent – 620VA
Halogen Incandescent – 500W
Secondary Voltage: 24VDC
Performance
Fc Range: 0.3 – 30FC
Adjustment range for Fc on: 1 – 30FC
Adjustment Range for FC off:
Minimum: 10% of Fc on, but not less than 0.3FC
Maximum: 70% of Fc on but not more than 9FC
Tolerance of Fc range: +-10%
Backup for clock: > 2 hours, when the unit has been connected at least 5 minutes
for easy system setup and configuration.
LUXSTATDNCM
PRODUCT FEATURES
DAYLIGHT
HARVESTING
•
Open Loop ON/OFF daylight harvesting control
•
Integrated clock for night blocking
Operating Environment
Temperature range: 41°F to 122°F (+5°C to +50°C)
•
Pushbutton programming
Dimensions
3.54”H x 1.37”W x 2.36”D
•
DIN rail mounting
Mounting
DIN Rail
•
UL listed
Accessories
Outdoor Light Sensor – LUXSTATLSO
Indoor Light Sensor - LUXSTATLS
•
California Title 24 Compliant
Certifications
UL and CE Listed
Warranty
Five-year limited
•
Five-year limited warranty
1.37”
Display
3.54”
Ordering Information
Navigation
Buttons
LUXSTATDNCM120
2.36”
PA G E 9 2
hubbell-automation.com
LUXSTATDNCM277
MODEL
Luxstat Day/Night Control Module with Clock,
120VAC, DIN Rail Mount
Luxstat Day/Night Control Module with Clock,
277VAC, DIN Rail Mount
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 9 3
Luxstat Light Sensor
Lux
Light sensor
0-10V
DAYLIGHTING CONTROLS
1
2
3
TITLE
24
CEC
LOW
COMPLIANT
CALIFORNIA
45º
24
Luxstat Control
VDC
A
VOLTAGE
B
17 23
68
91
01
11
2
30º
A
17 23
78-050
The Luxstat Light Sensor by Servodan provides the necessary daylight-level
45
45
68
91
01 11 2
B
30º
Luxstat Control DIM
information to the Luxstat daylight harvesting control modules. Using a
photodiode element, this sensor continuously measures daylight levels and sends
the information to the selected Luxstat daylight harvesting control module. In
order to operate as a true Open Loop controller, the sensor must be positioned
General Specifications
Electrical
Four jumper-selectable foot-candle ranges: .03-30FC; 3-300FC;
30-3,000FC; 60-6,000FC
24VDC Low Voltage Class 2 Device
3-conductor 22 AWG twisted cable—equal to Belden 8443
Construction
Protective hard plastic cover and housing
to see only daylight (no artificial light). You select the applicable foot-candle range
by using a jumper beneath the front cover.
LUXSTATLS
Dimension
2” diameter x 1.2” height (50.8 diameter x 30.5mm height)
Certifications
UL and cUL listed
Warranty
Five-year limited
Ordering Information
PRODUCT FEATURES
DAYLIGHT
HARVESTING
•
Daylight sensor for Luxstat Daylight Harvesting System
•
Architecturally attractive design
•
Indoor and outdoor versions
•
Open loop operation
•
Foot-candle range: 3-6,000FC
•
Mounts vertically or horizontally
•
UL and cUL listed
•
California Title 24 Compliant
•
Five-year limited warranty
LUXSTATLS
LUXSTATLSo
MODEL
Luxstat Light Sensor - Indoor
Luxstat Light Sensor - Outdoor
1.2”
2”
PA G E 9 4
hubbell-automation.com
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 9 5
Low Voltage Wall Switches for Luxstat
TITLE
24
CEC
COMPLIANT
CALIFORNIA
DAYLIGHTING CONTROLS
LOW
24
General Specifications
VDC
VOLTAGE
Power Requirements
Each switch: 100mA @ 30VDC Max
Each pilot LED: 18-30VDC, internal 2.2kohm, ½ Watt resistor
Operating Environment
Indoor use only
Operating temperature: 32°to 122°F (0° to 50°C)
Relative humidity (non-condensing): 10% to 90%
manual control of the Luxstat Daylight Harvesting Control Modules. The 4-button
Construction
Housing – Rugged, high-impact, injection-molded plastic
switch allows occupants to override the automatic daylight control and provides
Dimensions
4.2”H x 1.6” W x 1.4” D
Weight
1.6 oz
allows occupants to override the automatic daylight control and provides manual
Color
Mounting
ON/OFF control. The 2-Button Dimming Wall Switch provides manual dimming
White, Ivory
Single gang NEMA-style switch box
Decorator-style wall plates available separately
Warranty
Five-year limited
Hubbell Building Automation’s Low Voltage Wall Switches for Luxstat provides
manual ON/OFF and dimming control. The 2-Button Auto/Manual Wall Switch
control. The 1-Button Momentary Wall Switch provides manual ON/OFF control.
Ordering Information
LUXSTATSW4WH
LUXSTAT2DIM
MODEL
LUXSTATSW4
LUXSTATSW2 AUTO
LUXSTATSW2 DIM
LUXSTAT SW1
WH
IV
COLOR
White
Ivory
PRODUCT FEATURES
•
Attractive, architecturally pleasing design
•
Multiple button configurations available
•
Manual ON/OFF control
•
Low voltage operation; Class 2 device
•
Mounts to standard single-gang box
•
Five-year warranty
1.6”
Fits Standard
Decorator Style
Wallplate
(sold separately)
Auto
Switch
4.2”
Dimming
Switches
Manual
Switch
1.4”
PA G E 9 6
hubbell-automation.com
( 8 8 8 ) 6 9 8 - 3 2 4 2 | F a x o r d e r s ( 512 ) 4 5 0 - 0 8 6 4 | h u b b e l l - a u t o m a t i o n . c o m
PA G E 9 7