Product
Specifications
Monet
Monet™ Mark X 277V Fluorescent Dimmer
4.72 (119.9 mm)
4.72 (119.8 mm)
Monet
2.64 (67.1 mm)
0.24 (6.1 mm)
1.57 (39.9 mm)
1.94 (49.3 mm)
2.75 (69.9 mm)
Cat. No. MNX10-7L
4.25 (108.0 mm)
Cat. No. MNX15-7L
APPLICATION
The new Monet™ Mark X 277V Fluorescent Dimmer is included in Leviton's line of Premier Architectural Specification Grade Scene Capable
Lighting Controls. It is ideal for lighting designers and specifiers who require a low-profile architectural specification grade dimmer for use with
Advance Mark X™ and Philips Ecotron™ 277V fluorescent dimming ballasts. Monet's all-digital circuitry provides precise slide-control full range
dimming and preset ON/OFF switching for commercial fluorescent lighting. In addition to single-pole and three-way control, Monet's scene
capability provides up to six distinct lighting scenes.
FEATURES
• CSA Certified (File # LR-3413)
• Square Law Dimming ensures linear slide control across the entire
dim and bright output range.
• Designed for the demands of a commercial application or the
esthetics of a high-end residence
• Provides single-pole and 3-way control when used with a 3-way
ON/OFF switching remote (Cat. No. MN00R-10W).
• Provides subdued look that will not distract from items such as
paintings or museum displays when mounted on the same wall
surface.
• Scene Controller (Cat. No. MN00C-1LW) can be used
with Monet dimmers and fan speed controls for scene capability,
providing up to six distinct lighting scenes.
• Subtle lines of cover plate and concave slider minimize shadows.
Non-reflective, easy-to-clean matte finish minimizes light
reflections.
• Protected memory during temporary power failures ensures that
Monet will retain last setting before power interruption.
• UL Listed (File # E-31373)
• Low-profile architectural fins, even on larger 1500VA models
provide a flush fit that blends into the wall surface.
• Soft, green locator light discretely positioned on slider illuminates
when load is OFF.
• Easy, fluid slider operation designed for precise adjustment of
lighting level.
• Preset slider doesn't detract from clean line of device. Push gently
on slider for Preset ON/OFF operation.
• Hidden air-gap switch – slider moves down into hidden keyway to
provide AC air-gap switch for servicing needs.
• Digital circuitry provides S0FT-ON/FADE-OFF operation for an eyepleasing effect and prolonged lamp life.
• Screwless, designer-style architectural wallplate with matte finish
included. Multi-gang wallplates also available for combining narrow
and wide dimmers,
with or without fins removed.
• Small and large-size adapter plates (Cat. Nos. MN0SA and
MN0LA) fit all Leviton strap-mount Decora devices to make them
compatible with Monet wallplates.
• Large radio/TV interference filter
• Use with Leviton DPSPE-112 Power Extender to extend load
capacity to 2000W (2000VA) for incandescent, magnetic lowvoltage and Advance Mark X™ fluorescent dimming ballasts.
Note: Mark X™ is a trademark of the Advance
Transformer Company. Ecotron™ is a trademark of
Philips Electronics North America Corporation.
Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362 • Phone: (800) 323-8920 • Fax: (800) 832-9538
L3
Product
Specifications
Monet
.........................
STANDARDS SPECIFICATIONS
Architectural Specification Grade Dimmer for 277V Advance Mark X and Philips Ecotron fluorescent dimming ballasts shall be UL Listed
Leviton Architectural Specification Grade Scene Capable Preset Dimmer with Limited Two-Year Warranty. Device shall feature low-profile
architectural fin design, smooth, easy slider operation and preset. Device shall also provide digital circuitry, green locator light and
screwless, designer-style architectural wallplate with non-reflective matte finish. Available in ratings and colors as scheduled on plan.
Performance Specifications
Electrical
• Input 277 VAC @ 60Hz
• Line voltage regulation
• RFI noise suppression
• Maximum load fluorescent 1500VA stand alone; 2000VA with the use of a power extender
Mechanical
• Dimmer control - slide with a travel of 20mm
• Push On/Off switch control
• Four-wire device with ground wire
• The LED will be lighted when the load is off
• Hidden air-gap switch provided for fixture/lamp servicing
Environmental
• Operating temp. 0° Celsius to 55° Celsius
• Non-operating temp. -10° Celsius to + 85° Celsius
• Relative humidity, non-condensing 20% to 90%
ORDERING INFORMATION
Cat. No.
Rating
Description
MNX10-7L
1000VA, 277 VAC
Narrow-fin architectural dimmer for Advance
Mark X/Philips Ecotron fluorescent dimming ballast
MNX15-7L
1500VA, 277 VAC
Wide-fin architectural dimmer for Advance
Mark X/Philips Ecotron fluorescent dimming ballast
MN00C-1LW
No load rating
6-Scene Controller for Monet Scene Lighting,
compatible with Fan Speed Controls. Available
in White only; use color change kits for other colors
No load rating
For 3-way switching with Monet Dimmers
and Fan Speed Controls. Available in White
only; use color change kits for other colors
MN00R-10W
MN0SA-000
Small Decora Adapter Plate
For any Decora strap-mount device
MN0LA-000
Large Decora Adapter Plate
For any Decora strap-mount device
Available in White (-W), Ivory (-I), Almond (-A), Gray (-G) and Black (-E).
Multi-gang wallplates available for combining narrow and wide dimmers, with or without fins removed.
Leviton’s Limited Two-Year Warranty
This warranty gives you specific rights, and you may also have other rights, which vary in different states and countries. Leviton warrants to the original
consumer purchaser that this product is free of defects in materials and workmanship for 2 years from the purchase date. Leviton’s only obligation is
to correct such defects by repair or replacement, at its option, if within such 2 years the product is returned prepaid, with proof of purchase date, and
a description of the problem to the Leviton Manufacturing Co., Inc., ATTN: Quality Assurance Department, 59-25 Little Neck Pkwy., Little Neck, NY 113622591. This warranty does not cover labor for removal or reinstallation of the product and is void on any product installed improperly or in an improper
environment, overloaded, misused, opened, abused, or altered in any manner. There are no implied warranties of any kind, but if implied warranties
are required by the applicable jurisdiction, Leviton limits the duration of any implied warranty of fitness for use or merchantability to 2 years. Leviton
is not liable for incidental or consequential damages, including without limitation, loss of equipment use and lost sales or profits for breach of any
warranty on this product. Some jurisdictions may not allow exclusion of or limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damages, so the above exclusions or limitations may not even apply to you.
Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362 • Phone: (800) 323-8920 • Fax: (800) 832-9538
L4
Copyright © 2000 Leviton Manufacturing Co., Inc. All Rights Reserved
L4
C-544/B0
DP