BOLLARDS
CB
VRB
VSB
GEM
BNB
LE
B30
SL
Low Level Luminaires
For
Pathways
/
Courtyards
/
Entrances
Compact Bollards
Round Bollards
Square Bollards
GEM™ Bollards
Bounce® Bollards
Era Lantern Bollards
Traditional Bollards
Site Lightforms
Low Level Luminaires
Low Level Luminaires
Table of Contents
Relativity
2-3
CB
Compact Bollards
4-7
VRB
Vandal Resistant
Round Bollards
8-15
VSB
Vandal Resistant
Square Bollards 16-23
GEM™ Bollards
24-29
BNB
Bounce Bollards 30-35
LE
Era® Lantern
Bollards
B30
Bollards
SL
Site Lightforms
®
36-39
40-43
®
Photometrics
44-59
60-68
Lamp and Electrical Guide
69
KimNOW!
5-Day Shipping s Quality On Demand
See Ordering Information Pages
SITE / AREA
PARKING STRUCTURE
ROADWAY
ARCHITECTURAL FLOOD
ACCENT
LANDSCAPE
MAILING ADDRESS:
P.O. BOX 60080
CITY OF INDUSTRY, CA
91716-0080
BUSINESS ADDRESS:
16555 EAST GALE AVENUE
CITY OF INDUSTRY, CA 91745
U.S. A.
PHONE 626 / 968 - 5666
FAX 626 / 369 - 2695
ENTIRE CONTENTS
© COPYRIGHT 2009 KIM LIGHTING, INC.
ALL RIGHTS RESERVED
REPRODUCTION IN WHOLE OR IN PART
WITHOUT PERMISSION IS STRICTLY PROHIBITED.
U.S. PATENTS: D443,094, D313,482
D312,890, 4,231,080, D410,553, D473,333 S
www.kimlighting.com
Printed in U.S.A.
5507009327
Version 2.2 (11/09)
This extensive line of Low Level Luminaires has
been designed to provide specifiers with a broad
spectrum of lighting solutions for pedestrian
areas. Each Luminaire provides unique features
for brightness control, vandal resistance, and
architectural compatibility. In addition, each fixture
has an aesthetic relationship to various Kim pole
mounted luminaires, following the Kim Theory of
Relativity as a matrix for providing the proper
scale and visual logic to the overall outdoor
lighting scheme.
Since Low Level Luminaires can be subject to
vandalism in unsecured areas, most of these
fixtures have been engineered to provide superior
strength through extra thick components, and
base-to-grade connections that withstand
considerable force. Outstanding performance is
provided by reflector and/or lens designs that
delivers broad illumination with low brightness.
In combination, the performance, design, and
ruggedness of these Kim luminaires is unmatched
in the lighting industry.
Product Line
Selection Criteria
Configurations
Page
CB
Compact
Bollards
•
•
•
•
Compact size for smaller gardens and pathways.
Suitable for commercial or residential applications.
Full louvers provide low fixture brightness. No direct light above horizontal.
Not recommended for vandal-prone areas.
4-7
VRB
Vandal
Resistant
Round
Bollards
• Rugged construction is suitable for public areas where vandalism may occur.
• Round form complements curvilinear Kim site luminaires, or architectural
elements.
• Full high-angle louvers provide low fixture brightness with broad light
distribution. No direct light above horizontal.
• Vertical wall-wash feature on VRB2 and VRB4.
• Concrete shaft models available with complementary unlighted
barrier model.
8-15
Alternate Flat Top
available on lighted
models.
Vandal
Resistant
Square
Bollards
• Rugged construction is suitable for public areas where vandalism may occur.
• Square form complements rectilinear Kim site luminaires, or architectural
elements.
• Full high-angle louvers provide low fixture brightness with broad light
distribution. No direct light above horizontal.
• Vertical wall-wash feature on VSB2.
• Concrete shaft models available with complementary unlighted
barrier model.
16-23
GEM
Performance
Bollard
• Rugged construction for public areas with security.
• Round form complements curvilinear Kim site luminaires, or architectural
elements.
• Gem-like optical configuration provides broad light distribution with
attractive lens presence.
• Grade-level Pathway Marker also available.
• Specify compact fluorescent, HID, or LED sources.
24-29
BNB
Bounce®
Bollard
• Rugged construction is suitable for public areas where vandalism
may occur.
• Transitional design allows for installation in traditional or contemporary settings.
• Matches Kim Lighting’s Bounce and Mini-Bounce pedestrian and wall
mounted luminaires.
• Specify compact fluorescent, pulse start metal halide, or LED sources.
• Three unique shaft designs.
30-35
LE
Era® Lantern
Bollard
• Rugged construction is suitable for public areas where vandalism
may occur.
• Traditional design matches Kim Lighting’s Era Lantern series of high
performance site, pedestrian, and wall mounted luminaires.
• Specify compact fluorescent, pulse start metal halide, or LED sources.
• Three unique shaft designs.
• Full-cutoff optics are dark-sky approved.
36-39
B30
Traditional
Bollard
• Traditional bollard for secure areas. Not recommended for vandal-prone areas.
• Reflector/Louver optical system provides broad light distribution,and
higher brightness than louvered bollards. Higher illumination is provided
for objects taller than the bollard.
40-43
SL
Site
Lightforms
• Rugged construction for public areas. SL5 and SL6 utilize polycarbonate
lenses for vandal-prone areas.
• Strong architectural forms complement a wide variety of architectural styles.
• Full cutoff optics in SL1 - SL4. Very low brightness.
• Specify compact fluorescent, HID, or LED sources.
44-59
VSB
™
KIM LIGHTING
1
Kim Theory of Relativity
The Relationship of Outdoor Lighting to Site and Architecture
KIM THEORY OF RELATIVITY
The purpose of this guideline is to bring a cohesive look to outdoor
lighting, maximizing lighting efficiency while preserving the
architectural experience. Simply stated, the Kim Theory of Relativity
says “Poles belong in parking lots. And, once you leave the parking
lot, the outdoor lighting should become less and less conspicuous
until it becomes an integral part of the architecture.” In addition, the
luminaire style and geometry should remain consistent. If this
guideline is utilized, the outdoor lighting will enhance the site and
architecture, bringing unity to the outdoor lighting scheme.
As
Dis
tan
ce
ACA
27"
to A
rch
itec
Lum
ture
ina
Dec
ire
des
rea
ign
ses
and
, Lu
styl
min
e re
ma
aire
in c
Hei
ons
ght
tant
and
to u
nify
Sca
the
le A
ACP
ligh
lso
ting
21"
Dec
sch
eme
reas
es
BNS
View of Architecture
unobstructed
by poles
03
03
SITE / ROADWAY ZONE
PEDESTRIAN ZONE
Parking lots and roadways require luminaires on 20' - 40' poles to efficiently light
these large areas. Therefore, this lighting becomes dominant, and sets the design
and style for all other lighting as you progress towards the building.
As you leave the parking lot and transition to
pedestrian areas, poles should decrease in
height to 10' - 16'. In addition, luminaires should
decrease in scale, and can have more decorative
features to be appreciated at the pedestrian level.
2
KIM LIGHTING
CB
VRB
VSB
GEM™
BNB
LE
B30
SL
WD
SW
GEM
WF
AFL
LTV
LANDSCAPE / PATH ZONE
BUILDING / PERIMETER ZONE
Near the building, luminaires should begin
to disappear, blending into the landscape
and hardscape elements.
No pole mounted luminaires should ever be used near the building, as they will
dominate the architecture. The only exception would be the use of decorative
luminaires to delineate entrances to the structure. Building mounted, architecturally
compatible fixtures should be almost invisible.
KIM LIGHTING
3
CB
Compact Bollards
Features
6"
Louver Assembly
Optics
Individual louver components, top,
and base are constructed of heavy
die-cast aluminum, connected as
one unit with four concealed
stainless steel screws within the
vertical supports.
The success of the Compact
Bollard’s performance is due to
full overlapping louvers which
provide total source cutoff above
horizontal. A soft glow from the
louvers provides sufficient vertical
illumination for surrounding plants
or pedestrians.
For relamping, these screws are
removed and the interlocking
louvers lifted as one unit, providing
access to the glass enclosure and
lamp.
24"
or
32"
overall
height Louver base is die-cast aluminum
and secures internally to the riser
with four concealed stainless steel
screws.
The glass globe is completely
gasketed and utilizes prismatics to
optimize and control the light.
With recommended coated lamps,
a smooth wash of light is achieved
with no shadows from the vertical
supports.
Electrical Components
Extruded Aluminum Riser
All HPF ballasts and components
are factory mounted and prewired
to a single bracket for field
installation within the riser.
5" diameter .125" thick aluminum
extrusion available in two lengths
for overall fixture heights of 24" and
32". Vertical groove detail aligns
with the vertical fixture supports
and serves to strengthen and unify
the design. Thick internal ribs at
the mounting screw locations
provide increased strength.
Anchor Base
To ensure fixture strength and
stability in adverse conditions, the
base is heavy cast aluminum and
secures the riser with four flush
stainless steel sockethead screws
finished to match fixture.
2K"
MIN
INSTALLATION IN SOIL
INSTALLATION IN PAVING OR HARDSCAPE
INSTALLATION
Bollards are installed with anchor bolts imbedded in a poured-in-place concrete footing (by others). Internal anchor
base is leveled prior to placing the riser. When installing in soil or landscaping, the concrete footing should be
raised at least 2K" to avoid corrosive contact between fixture and soil or standing water.
KIM LIGHTING
5
CB
Compact Bollards
Specifications
Top and Louvers: Interlocking die-cast, low-copper (<0.6% Cu)
aluminum sections fasten together with concealed stainless steel screws.
Louver base assembly fastens internally to riser with 4 concealed screws.
Dimensions
CB Models
50 to 70 watt
Medium Base Lamps
42 watt Compact Fluorescent
Riser: Extruded aluminum, 5" diameter, .125" typical wall thickness,
external vertical grooves align with vertical members on louver assembly.
Attaches to anchor base with 4 countersunk stainless steel flat socket
head screws finished to match fixture.
CB32
Maximum weight: 20 lb
Anchor Base: Heavy sand cast, low-copper (<0.6% Cu) aluminum, fully
concealed within riser shaft. Three C" x 10"+ 2" zinc plated anchor bolts,
each with two nuts and washers, and a rigid pressboard template.
6" DIA.
(152.4 mm)
Globe: Internally fluted, clear tempered glass, fully gasketed.
5" DIA.
6"
(127.0 mm)
(152.4 mm)
1L" DIA.
26"
(44.5 mm)
CONDUIT
OPENING
32"
(660.4 mm)
LIGHT
CENTER
HEIGHT
(812.8 mm)
2E" (73.0 mm)
BOLT CIRCLE DIA.
BASE PLAN
CB
5" DIA.
(127.0 mm)
2K" MIN.
(63.5 mm)
Socket: Porcelain medium base rated 4KV for HID and incandescent.
Fluorescent is13W-GX23-2; 42W-G24q-4 - Universal Socket.
Ballast: Factory mounted to rigid harness suspended from fixture head
within the Riser. Wire leads supplied to base. HID: High power factor with
starting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes.
13W Fluorescent: 120V 32°F. starting; 277V 0°F. starting.
26W, 32W, 42W Fluorescent: 120V through 277V High power factor with
starting temperature of 0°F.
Finish/Color: Finish is Super TGIC thermoset polyester powder coat
paint, 2.5 mil nominal thickness, applied over a titanated zirconium
conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.
Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,
Platinum Silver, or White. Custom colors are available.
CAUTION: Fixtures must be grounded in accordance with national, state
and/or local electrical codes. Failure to do so may result in serious
personal injury.
CB24
Maximum weight: 17 lb
6" DIA.
(152.4 mm)
6"
(152.4 mm)
18"
(457.2 mm)
LIGHT
CENTER
HEIGHT
24"
(609.6 mm)
5" DIA.
(127.0 mm)
2K" MIN.
(63.5 mm)
Listings and Ratings
ULcUL 1598
IP46 Rated
CE
IESNA Rated - Cut Off
IDA Rated - Full Shielded
6
KIM LIGHTING
25C Ambient
CB
Compact Bollards
Ordering Information
Ordering Example:
Fixture
Electrical Module
Luminaire
Finish
Option
CB32 / 50PMH277 / WH / HS
1
2
3
4
1 Fixture:
Cat. No. designates CB fixture.
Cat. No.:
Cat. No.:
CB32
2 Electrical Module:
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
INC = Incandescent
PL = Compact Fluorescent
50PMH120
50PMH208
50PMH240
50PMH277
70PMH120
70PMH208
70PMH240
70PMH277
70PMH347
50HPS120
50HPS208
50HPS240
50HPS277
100INC120
13PL120
13PL277
42PL1201
42PL2081
42PL2401
42PL2771
See lamp and electrical data on
page 69 for ballast types and
characteristics.
Lamp Lamp Line
Watts Type Volts
50
PMH 277
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated zirconium
conversion coating.
CB24
70HPS120
70HPS208
70HPS240
70HPS277
70HPS347
NOTE: 70W PMH
and HPS are not
recommended for
CB24 due to
extreme light levels
at fixture base.
42PL operates one 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).
1
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.
Color:
Cat. No.:
Dark Bronze Light Gray
DB
LG
Stealth Gray™ Platinum Silver
SG
PS
White
WH
Custom Colors
CC
Consult
representative
for custom colors.
HS
180° trimmable houseside shield that inserts inside lamp enclosure .032" thick natural
aluminum, trimmable in field.
Cat. No.: EM
Battery Back-up:
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
For Compact Fluorescent only.
NOTE: For CB32 model only.
4 Optional Houseside
Cat. No.:
Black
BL
Shield:
5 Optional Emergency
6 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up to 90 minutes of supplemental
light. See table at right for max. lumens output by lamps.
NOTE: For CB32 model only.
Lamp (4-Pin)
42W
32W
26W
1 lamp lumens
750
575
450
KIM LIGHTING
7
VRB
Configurations
Vandal Resistant Round Bollards
Single Function Luminaire
Dual Function Luminaire
VRB1 and VRB3 Horizontal louvers provide 360° of down-lighting
with total lamp source cutoff above 90° horizontal. Designed for
lighting walkways, entrances, courtyards, and landscaped areas
where fixtures are viewable from all directions. See page 10.
VRB2 and VRB4 Horizontal louvers provide 210° of cutoff downlighting, and vertical louvers provide 150° of non-cutoff accent lighting.
Designed for lighting walkways where adjacent building facades, walls
or landscaping may be enhanced by a vertical wash of light. Fixtures
should be viewable from the walkway only. See page 10.
KIM LIGHTING
9
VRB
Vandal Resistant Round Bollards
VRB1 and VRB3 Single Function Luminaire
Features
VRB2 and VRB4 Dual Function Luminaire
360° Horizontal Louvers
360°
210° Horizontal Louvers, 150° Vertical Louvers
210°
150°
65° Louver Angle
Compact glass lamp enclosure
allows deep horizontal louvers with
a high angle for greater light throw.
Closed vertical spacing eliminates
direct viewing of the light source
above horizontal, ensuring glarefree, efficient illumination.
Total Source Cutoff Above 90°
Vertical Wash Option (VRB2
and VRB4)
High-Angle Light Throw
Excellent light uniformity and
fixture spacing is achieved as
a result of the high-angle light
throw. Peak candlepower is at
67.5°.
150° of unobstructed illumination
provides accent light on building
facades, walls or landscaping.
Vertical louvers provide protection
and shielding along this non-cutoff
segment of the fixture.
Vertical Section
Shadowless Lighting
Internal flutes in the glass lamp
enclosure eliminate shadows by
refracting light around structural
supports and vertical louvers.
Phosphor coated lamps are
recommended, and VRB2 and
VRB4 models should be
located at least 10' from the
vertical surface for best results.
Internally fluted, tempered and
gasketed glass lamp enclosure.
Horizontal Section
at Light Center
10
KIM LIGHTING
VRB
Vandal Resistant Round Bollards
Features
Vandal Resistant
Construction
Luminaire components are
heavy-wall aluminum castings.
The top cap is available in either
domed or flat-top configuration,
and the louver modules are
one-piece castings which
provide greater strength than
individually stacked louvers.
Concealed Access
Air Cooling
Added security against
vandalism is provided by
concealed access screws.
A standard allen wrench
loosens screws, allowing
access for lamp replacement by
twist-lock removal of the top
cap. Complete removal of
screws is not required.
Natural air currents provide
flow-through ventilation, cooling
the exterior metal surfaces and
interior optical compartment,
thereby minimizing excessive
heat build-up.
Installation and Mounting Base Details
Aluminum Shaft
Installation in Soil
Electrical
components are
factory mounted and
prewired to a rigid
bracket, bolted to
the anchor base.
Aluminum shaft
twist-locks to the
base casting and
secures with two
recessed allen
screws.
Concrete Shaft
Installation in
Paving or Hardscape
Aluminum shaft
bollards are installed
with anchor bolts in
a poured-in-place
footing (by others).
Internal anchor base
is leveled prior to
installing the shaft.
Paving
Installation in Soil
Electrical
components are
factory mounted and
prewired to a rigid
harness, suspended
within the shaft.
When mounting in
soil, anchor bolt
fasteners and other
hardware must be
protected from soil by
grouting.
Soil
Installation in
Paving or Hardscape
Concrete shaft bollards
are installed with anchor
bolts embedded in a
below grade, poured-inplace footing (by others).
Leveling nuts make
installation and
alignment fast and
accurate. All fastening
hardware must not
contact soil or other
corrosive elements.
Paving
Soil
Wiring and
footing
(by others).
Wiring and
footing
(by others).
KIM LIGHTING
11
VRB1 / VRB3
Vandal Resistant Round Bollards
VRB1 and VRB3
VRB Models
70 to 100 watt
Medium Base Lamps
42 watt Compact Fluorescent
VRB1 - Single Function Luminaire (Aluminum Shaft)
Maximum weight: 30 lb
8"
(203.2 mm)
DIA.
6"
8"
(203.2 mm)
DIA.
9"
(152.4 mm)
(228.6 mm)
3L"
36"
(95.3 mm)
CONDUIT
OPENING
(914.4 mm)
LIGHT
CENTER
HEIGHT
5" (127.0 mm)
42"*
BOLT CIRCLE DIA.
(1066.8 mm)
BASE PLAN
VRB
ALUMINUM SHAFT
*30" OR 36" OVERALL HEIGHT
1K"
AVAILABLE - CONTACT
KIM REPRESENTATIVE
(27K" ABSOLUTE MINIMUM)
(38.1 mm)
ANCHOR BOLT PROJECTION
VRB1C - Single Function Luminaire (Concrete Shaft)
Maximum weight: 115 lb
8"
(203.2 mm)
DIA.
6"
(152.4 mm)
42"
(1066.8 mm)
MAXIMUM
HEIGHT
ABOVE
GRADE
8"
(203.2 mm)
DIA.
9"
(228.6 mm)
3C"
(85.7 mm)
CONDUIT
OPENING
30"
(762.0 mm)
MINIMUM
HEIGHT
ABOVE
GRADE
16 (406.4 mm)
16"
MAXIMUM
BURIAL DEPTH
Specifications
Top Cap: One-piece, low-copper (<0.6% Cu) aluminum F" minimum
thickness, secured to louvers by concealed allen screws in keyhole slots. For
relamping access, allen screws shall not require complete removal.
VRB1: Domed Top VRB3: Flat Top
Louvers: Die cast, low-copper (<0.6% Cu) aluminum horizontal louvers with
four vertical ribs for concealed mounting hardware. 65° upward pitch and
provides fully shielded lamp. Louver casting shall be secured to shaft by four
internal tie rods.
Lamp Enclosure: One-piece tempered molded glass with internal flutes and
full gasketing at bottom edge.
Socket: Porcelain medium base socket rated 4KV for HID and incandescent.
Plastic socket for Fluorescent.
Fixture Head: Allows flow-through ventilation around and above the
lamp enclosure.
Shaft: One-piece extruded aluminum, .125" wall thickness with a heavy cast
aluminum twist-lock anchor base concealed within the shaft. Concealed set
screws shall lock shaft onto the cast anchor base.
Ballast: VRB1 and VRB3 - Factory mounted to rigid harness attached to the
anchor base. Wiring shall be supplied from the socket for field connection to
the prewired ballast components. HID: High power factor with starting
temperatures of -20°F. for PMH and -40°F. for HPS lamp modes. 26W, 32W,
42W Fluorescent: High power factor with starting temperature of 0°F.
VRB1C and VRB3C - Factory mounted to rigid harness for field wiring and
suspension from fixture head within the concrete shaft. Wire leads supplied to
base. HID: High power factor with starting temperatures of -20°F. for PMH and
-40°F. for HPS lamp modes. 26W, 32W, 42W Fluorescent: High power factor
with starting temperature of 0°F.
Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks, each with two nuts,
washers and a rigid pressed board template.
Finish/Color: Finish is Super TGIC thermoset polyester powder coat paint, 2.5
mil nominal thickness, applied over a titanated zirconium conversion coating;
A.S.T.M. 2500 hour salt spray test endurance rating. Standard colors are Black,
Dark Bronze, Light Gray, Stealth Gray™, Platinum Silver, or White. Custom colors
are available.
CAUTION: Fixtures must be grounded in accordance with national, state and/or
local electrical codes. Failure to do so may result in serious personal injury.
VRB1C and VRB3C Concrete Shaft Specifications
9K" (241.3 mm)
BOLT CIRCLE DIA.
BASE PLAN
VRB
CONCRETE SHAFT
VRBC - Unlighted Concrete Bollard
Maximum weight: 150 lb
8"
(203.2 mm)
DIA.
42"
(1066.8 mm)
MAXIMUM
HEIGHT
ABOVE
GRADE
9K" (241.3 mm)
BOLT CIRCLE DIA.
BASE PLAN
VRBC
Material: Cement shall conform to current specifications for “Portland
Cement.” ASTM C150, Type I or II. Aggregates shall meet current
requirements of “Specifications for Concrete Aggregates,” ASTM C33. Water
shall be clean and free from deleterious amounts of silt, oil, acids, alkalies or
organic materials. Wire for reinforcement shall conform to ASTM A185. Steel for
lugs and plates shall conform to ASTM A36, or A283 grade D.
Surface: Medium sand-blasted with anti-graffiti sealer. Available colors are
Charcoal, Brown, Natural Gray or White, integral in concrete mix.
Cure and Strength: Allows for completion of the hydration process, and result
in a 28 day compressive strength of not less than 4,500 psi.
Manufacture: Fiberglass molds used to insure uniform parts. Mold parting
lines may be slightly visible in finished parts.
Anchorage: Four steel mounting tabs for installation on four K" x 10" + 2" zinc
electroplated L-hook anchor bolts. Each anchor bolt is supplied with two nuts,
two washers, and a rigid pressed board template.
Shipment: Palletized with adequate hold-downs to prevent load movement
in transit.
VRBC same as VRB1C except:
No fixture, electrical elements, or conduit openings. Flat top not available.
Listings and Ratings
ULcUL 1598
IP46 Rated
CE
IESNA Rated - Cut Off
IDA Rated - Full Shielded
12
KIM LIGHTING
25C Ambient
VRB1 / VRB3
Vandal esistant ound Bollards
Ordering Information
Ordering Example:
Fixture
Luminaire
Electrical Module
Finish Option
Fixture
VRB1/ 70PMH120/ BL / HS
1
2
3
Electrical Module
Top Cap
Finish
Concrete
Shaft
Finish Option
VRB1C / 70PMH120 / BL / CH-C/ HS
5
1
2
Fixture with Aluminum Shaft
3
4
Concrete
Finish
Fixture
VRBC / CH-C
5
1
4
Unlighted
Concrete Bollard
Fixture with Concrete Shaft
1 Fixture:
Cat. No. designates VRB1 and
VRB3 fixture and shaft.
Top Caps available:
VRB1 - Domed Top
VRB3 - Flat Top
Cat. No.:
2 Electrical Module:
70PMH120
70PMH208
70PMH240
70PMH277
70PMH347
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
PL = Compact Fluorescent
See lamp and electrical data on
page 69 for ballast types and
characteristics.
Lamp Lamp Line
Watts Type Volts
70
PMH 120
Coated lamps recommended.
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated zirconium
conversion coating.
VRB1
Domed Top
Cat. No.:
VRB3
Flat Top
100PMH120
100PMH208
100PMH240
100PMH277
100PMH347
70HPS120
70HPS208
70HPS240
70HPS277
70HPS347
Ballast for
aluminum
shaft
42PL1201
42PL2081
42PL2401
42PL2771
VRB1C
Domed Top
Cat. No.: VRBC
VRB3C
Flat Top
100HPS120
100HPS208
100HPS240
100HPS277
100HPS347
KimNOW! Available Configurations:
KN-VRB1/100PMH/DB*,
KN-VRB1/100PMH/WH*,
KN-VRB1/42PL/DB**,
KN-VRB1/42PL/WH**
Ballast for
concrete
shaft
* Multi-tap ballast (120, 208, 240, or 277 volts)
** Variable voltage ballast (120 thru 277 volts)
42PL operates one 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.
1
Color:
Cat. No.:
Black
BL
Dark Bronze
DB
Light Gray
LG
Stealth Gray™
SG
Platinum Silver
PS
White
WH
NOTE: Black and Dark Bronze colors will produce slightly less louver
brightness than Light Gray or White. See below.
4 Concrete Finish:
Color:
Cat. No.:
Brown
BR-C
5 Optional Houseside
Cat. No.:
HS
180° trimmable houseside shield that inserts inside lamp enclosure .032" thick natural
aluminum, trimmable in field.
Cat. No.: EM
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
Shield:
6 Optional Emergency
Battery Back-up:
Charcoal
CH-C
Natural Gray
NG-C
White
WH-C
Custom Colors
CC
Consult
representative
for custom colors.
Available colors are
integral in concrete mix.
For Compact Fluorescent only.
7 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up to 90 minutes of supplemental
light. See table at right for max. lumens output by lamps.
Lamp (4-Pin) 1 lamp lumens
42W
32W
26W
VRB1 and VRB3 models are
provided with matching powder
coat paint finishes on fixture
and shaft. Standard colors are
as follows:
Cat. No.:
Color:
BL
DB
LG
SG
PS
Black
Dark Bronze
Light Gray
Stealth Gray™
Platinum Silver
750
575
450
WH
White
KIM LIGHTING
13
VRB2 / VRB4
Vandal Resistant Round Bollards
VRB Models
70 to 100 watt
Medium Base Lamps
42 watt Compact Fluorescent
VRB2 - Dual Function Luminaire (Aluminum Shaft)
Maximum weight: 30 lb
8"
(203.2 mm)
DIA.
6"
8"
(203.2 mm)
DIA.
9"
(152.4 mm)
(228.6 mm)
3L"
(95.3 mm)
CONDUIT
OPENING
36"
(914.4 mm)
LIGHT
CENTER
HEIGHT
42"*
5" (127.0 mm)
(1066.8 mm)
BOLT CIRCLE DIA.
BASE PLAN
VRB
ALUMINUM SHAFT
*30" OR 36" OVERALL HEIGHT
1K"
AVAILABLE - CONTACT
KIM REPRESENTATIVE
(27K" ABSOLUTE MINIMUM)
(38.1 mm)
ANCHOR BOLT PROJECTION
VRB2C - Dual Function Luminaire (Concrete Shaft)
Maximum weight: 115 lb
8"
(203.2 mm)
DIA.
6"
(152.4 mm)
8"
(203.2 mm)
DIA.
9"
(228.6 mm)
3C"
42"
(1066.8 mm)
MAXIMUM
HEIGHT
ABOVE
GRADE
(85.7 mm)
CONDUIT
OPENING
30"
(762.0 mm)
MINIMUM
HEIGHT
ABOVE
GRADE
16 (406.44 mm)
16"
MAXIMUM
BURIAL DEPTH
9K" (241.3 mm)
BOLT CIRCLE DIA.
BASE PLAN
VRB
CONCRETE SHAFT
VRBC - Unlighted Concrete Bollard
Maximum weight: 150 lb
8"
42"
(203.2 mm)
DIA.
(1066.8 mm)
MAXIMUM
HEIGHT
ABOVE
GRADE
9K" (241.3 mm)
Specifications
Top Cap: One-piece, low-copper (<0.6% Cu) aluminum F" minimum
thickness, secured to louvers by concealed allen screws in keyhole slots. For
relamping access, allen screws shall not require complete removal.
VRB2: Domed Top. VRB4: Flat Top.
Louvers: One-piece, low-copper (<0.6% Cu) aluminum with horizontal and
vertical blades. Horizontal louvers shall provide 210° of downlighting with
source cutoff above horizontal. Vertical louvers shall provide 150° of non-cutoff
lighting. Horizontal louver blades shall have a 1L" depth with a 65° upward
pitch from horizontal. Vertical louver blades shall have a 1L" depth with 30°
spacing. Louver casting shall be secured to shaft by four internal tie rods.
Lamp Enclosure: One-piece tempered molded glass with internal flutes and
full gasketing at bottom edge.
Socket: Porcelain medium base socket rated 4KV for HID and incandescent.
Plastic socket for Fluorescent.
Fixture Head:Allows flow-through ventilation around and above the lamp enclosure.
Shaft: One-piece extruded aluminum, .125" wall thickness with a heavy cast
aluminum twist-lock anchor base concealed within the shaft. Concealed set
screws shall lock shaft onto the cast anchor base.
Ballast: VRB2 and VRB4 - Factory mounted to rigid harness attached to the
anchor base. Wiring shall be supplied from the socket for field connection to
the prewired ballast components. HID: High power factor with starting
temperatures of -20°F. for PMH and -40°F. for HPS lamp modes. 26W, 32W,
42W Fluorescent: High power factor with starting temperature of 0°F.
VRB2C and VRB4C - Factory mounted to rigid harness for field wiring and
suspension from fixture head within the concrete shaft. Wire leads supplied to
base. HID: High power factor with starting temperatures of -20°F. for PMH and
-40°F. for HPS lamp modes. 26W, 32W, 42W Fluorescent: High power factor
with starting temperature of 0°F.
Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks, each with two nuts,
washers and a rigid pressed board template.
Finish/Color: Finish is Super TGIC thermoset polyester powder coat paint, 2.5
mil nominal thickness, applied over a titanated zirconium conversion coating;
A.S.T.M. 2500 hour salt spray test endurance rating. Standard colors are
Black, Dark Bronze, Light Gray, Stealth Gray™, Platinum Silver, or White.
Custom colors are available.
CAUTION: Fixtures must be grounded in accordance with national, state and/or
local electrical codes. Failure to do so may result in serious personal injury.
VRB2C and VRB4C Concrete Shaft Specifications
Material: Cement shall conform to current specifications for “Portland
Cement.” ASTM C150, Type I or II. Aggregates shall meet current
requirements of “Specifications for Concrete Aggregates,” ASTM C33. Water
shall be clean and free from deleterious amounts of silt, oil, acids, alkalies or
organic materials. Wire for reinforcement shall conform to ASTM A185. Steel for
lugs and plates shall conform to ASTM A36, or A283 grade D.
Surface: Medium sand-blasted with anti-graffiti sealer. Available colors are:
Charcoal, Brown, Natural Gray or White, integral in concrete mix.
Cure and Strength: Allows for completion of the hydration process, and result
in a 28 day compressive strength of not less than 4,500 psi.
Manufacture: Fiberglass molds used to insure uniform parts. Mold parting
lines may be slightly visible in finished parts.
Anchorage: Four steel mounting tabs for installation on four K" x 10" + 2" zinc
electroplated L-hook anchor bolts. Each anchor bolt is supplied with two nuts,
two washers, and a rigid pressed board template.
Shipment: Palletized with adequate hold-downs to prevent load movement
in transit.
VRBC sameas VRB2C:
No fixture, electrical elements, or conduit openings. Flat top not available.
BOLT CIRCLE DIA.
BASE PLAN
VRBC
Listings and Ratings
ULcUL 1598
IP46 Rated
CE
IESNA Rated - Cut Off
IDA Rated - Full Shielded
14
KIM LIGHTING
25C Ambient
VRB2 / VRB4
Vandal esistant ound Bollards
Ordering Information
Ordering Example:
Fixture
Electrical Module
Luminaire
Finish
Fixture
VRB2/100HPS120/ LG
1
2
Electrical Module
Top Cap
Finish
Concrete
Shaft
Finish
VRB2C /100HPS120/ LG /NG-C
3
1
2
3
Fixture
VRBC / NG-C
4
1
4
Unlighted Concrete
Bollard
Fixture with Concrete Shaft
Fixture with Aluminum Shaft
Concrete
Finish
1 Fixture:
Cat. No. designates VRB2 and
VRB4 fixture and shaft.
Top Caps available:
VRB2 - Domed Top
Cat. No.:
VRB4 - Flat Top
2 Electrical Module:
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
PL = Compact Fluorescent
See lamp and electrical data on
page 69 for ballast types and
characteristics.
Lamp Lamp Line
Watts Type Volts
100 HPS 120
Coated lamps recommended.
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated zirconium
conversion coating.
VRB2
Domed Top
Cat. No.:
VRB4
Flat Top
70PMH120
70PMH208
70PMH240
70PMH277
70PMH347
70HPS120
70HPS208
70HPS240
70HPS277
70HPS347
100PMH120
100PMH208
100PMH240
100PMH277
100PMH347
100HPS120
100HPS208
100HPS240
100HPS277
100HPS347
42PL1201
42PL2081
42PL2401
42PL2771
VRB2C
Domed Top
Cat. No.: VRBC
VRB4C
Flat Top
70PMH120
70PMH208
70PMH240
70PMH277
70PMH347
70HPS120
70HPS208
70HPS240
70HPS277
70HPS347
100PMH120
100PMH208
100PMH240
100PMH277
100PMH347
100HPS120
100HPS208
100HPS240
100HPS277
100HPS347
42PL1201
42PL2081
42PL2401
42PL2771
42PL operates one 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.
1
Color:
Cat. No.:
Black
BL
Dark Bronze
DB
Light Gray
LG
Stealth Gray™
SG
Platinum Silver
PS
White
WH
NOTE: Black and Dark Bronze colors will produce slightly less louver
brightness than Light Gray or White. See below.
4 Concrete Finish:
Color:
Cat. No.:
Brown
BR-C
5 Optional Emergency
Cat. No.: EM
Battery Back-up:
Charcoal
CH-C
Natural Gray
NG-C
White
WH-C
Custom Colors
CC
Consult
representative
for custom colors.
Available colors are
integral in concrete mix.
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
For Compact Fluorescent only.
6 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up to 90 minutes of supplemental
light. See table at right for max. lumens output by lamps.
Lamp (4-Pin)
42W
32W
26W
VRB2 and VRB4 models are
provided with matching powder
coat paint finishes on fixture
and shaft. Standard colors are
as follows:
Cat. No.:
Color:
1 lamp lumens
750
575
450
BL
DB
LG
SG
PS
WH
Black
Dark Bronze
Light Gray
Stealth Gray™
Platinum Silver
White
KIM LIGHTING
15
VSB
Configurations
Vandal Resistant Square Bollards
Single Function Luminaire
Dual Function Luminaire
VSB1 Horizontal louvers provide 360° of down-lighting with total
lamp source cutoff above 90° horizontal. Designed for lighting
walkways, entrances, courtyards, and landscaped areas where
fixtures are viewable from all directions. See page 18.
VSB2 Horizontal louvers provide 270° of cutoff down-lighting, and
vertical louvers provide 90° of non-cutoff accent lighting. Designed
for lighting walkways where adjacent building facades, walls or
landscaping may be enhanced by a vertical wash of light. Fixtures
should be viewable from the walkway only. See page 18.
KIM LIGHTING
17
VSB
Vandal Resistant Square Bollards
Features
VSB1 Single Function Luminaire
VSB2 Dual Function Luminaire
360° Horizontal Louvers
360°
270° Horizontal Louvers, 90° Vertical Louvers
270°
90°
Superior Illumination and
Glare Control
A compact glass lamp enclosure
allows deep horizontal louvers angled
for maximum light throw. Close
vertical spacing of the louvers
provides a 90° cutoff angle
eliminating direct viewing of the light
source above horizontal. This ensures
glare-free, efficient illumination with
a peak candlepower of 67.5°, while
still allowing for maximum spacing
between luminaires.
Vertical Wash Option (VSB2)
Total Source Cutoff Above 90°
90° of illumination
Vertical Section
Shadow Control
Internal flutes in the glass lamp
enclosure decrease shadowing by
diffusing or scattering light around the
VSB’s structural supports. Phosphor
coated lamps are recommended,
and VSB2 models should be located
at least 10' from the vertical surface
being illuminated by the vertical
louver fixture segment.
Internally fluted, tempered and
gasketed glass lamp enclosure.
Horizontal Section
at Light Center
18
KIM LIGHTING
VSB
Vandal Resistant Square Bollards
Features
Vandal Resistant
Construction
Luminaire components utilize
heavy-wall aluminum castings.
The gabled top not only
withstands high impact, but the
design also discourages its use
as a resting place. The design
of the VSB louver modules
provide greater strength than
individually stacked louvers.
Each louver module interlocks
forming a rugged, highly
vandal-resistant fixture head.
Concealed Access
Heat Control
Added security against
vandalism is provided by
concealed access screws.
A standard allen wrench is the
only tool needed to loosen
hidden screws, allowing for easy
access to the lamp enclosure.
Complete removal of screws
is not necessary. A twist and
lock top casting is simply
removed to allow access
for re-lamping.
Excessive heat build-up is
minimized by the VSB’s open
louver architecture. Natural air
currents provide flow-through
ventilation, cooling the top metal
surfaces and interior optical
compartment. Yet, the lamp
compartment is totally sealed
for weatherproof operation.
Installation and Mounting Base Details
Aluminum Shaft
Installation in Soil
Electrical
components are
factory mounted and
prewired to a rigid
bracket, bolted to
the anchor base.
Aluminum shaft
locks to the base
casting and secures
with four hex socket
stainless steel
screws.
Concrete Shaft
Installation in
Paving or Hardscape
Aluminum shaft
bollards are installed
with anchor bolts in
a poured-in-place
footing (by others).
Internal anchor base
is leveled prior to
installing the shaft.
Paving
Installation in Soil
Electrical
components are
factory mounted and
prewired to a rigid
harness, suspended
within the shaft.
When mounting in
soil, anchor bolt
fasteners and other
hardware must be
protected from soil by
grouting.
Soil
Installation in
Paving or Hardscape
Concrete shaft bollards
are installed with anchor
bolts embedded in a
below grade, poured-inplace footing (by others).
Leveling nuts make
installation and
alignment fast and
accurate. All fastening
hardware must not
contact soil or other
corrosive elements.
Paving
Soil
Wiring and
footing
(by others).
Wiring and
footing
(by others).
KIM LIGHTING
19
VSB1
Vandal Resistant Square Bollards
VSB Models
70 to 100 watt
Medium Base Lamps
42 watt Compact Fluorescent
VSB1 - Single Function Luminaire (Aluminum Shaft)
Maximum weight: 35 lb
8"
(203.2 mm)
DIA.
8"
(203.2 mm)
7"
10"
(177.8 mm)
(254.0 mm)
3C"
(85.7 mm)
CONDUIT
OPENING
36"
(914.4 mm)
LIGHT
CENTER
HEIGHT
5" (127.0 mm)
43"
BOLT CIRCLE DIA.
(1092.2 mm)
BASE PLAN
VSB
ALUMINUM SHAFT
*30" OR 36" OVERALL HEIGHT
1K"
AVAILABLE - CONTACT
KIM REPRESENTATIVE
(27K" ABSOLUTE MINIMUM)
(38.1 mm)
ANCHOR BOLT PROJECTION
VSB1C - Single Function Luminaire (Concrete Shaft)
Maximum weight: 120 lb
8"
(203.2 mm)
DIA.
7"
(177.8 mm)
8"
10"
(203.2 mm)
(254.0 mm)
3C"
43"
(1092.2 mm)
MAXIMUM
HEIGHT
ABOVE
GRADE
(85.7 mm)
CONDUIT
OPENING
30"
(762.0 mm)
MINIMUM
HEIGHT
ABOVE
GRADE
15"
15" (381.0 mm)
MAXIMUM
BURIAL DEPTH
9K" (241.3 mm)
BASE PLAN
VSB
CONCRETE SHAFT
VSBC - Unlighted Concrete Bollard
Maximum weight: 175 lb
8"
(203.2 mm)
43"
Top Cap: One-piece die-cast, low-copper (<0.6% Cu) aluminum F" minimum
thickness, secured to louvers by concealed stainless steel allen screws
in keyhole slots. For relamping access, allen screws shall not require
complete removal.
Louvers: One-piece die-cast, low-copper (<0.6% Cu) aluminum with vertical
support ribs at 90° intervals. Horizontal louver blades shall have a 1L" depth,
and be angled 25° from the horizontal. Louvers shall provide light source
cutoff above horizontal. Louver castings shall be secured to shaft by four
internal tie rods.
Lamp Enclosure: One-piece tempered molded glass with internal flutes and
full silicone gasketing at bottom edge.
Socket: Porcelain medium base socket rated 4KV for HID
Plastic socket for Fluorescent.
Fixture Head: Allows flow-through ventilation around and above the
lamp enclosure.
Shaft: One-piece extruded aluminum, .156" minimum wall thickness with a
heavy cast aluminum anchor base concealed within the shaft. Hex socket
stainless steel screws shall lock shaft onto the cast anchor base.
Ballast: VSB1- Factory mounted to rigid harness attached to the anchor base.
Wiring shall be supplied from the socket for field connection to the prewired
ballast components. HID: High power factor with starting temperatures of
-20°F. for PMH and -40°F. for HPS lamp modes. 26W, 32W, 42W
Fluorescent: High power factor with starting temperature of 0°F.
VSB1C - Factory mounted to rigid harness for field wiring and suspension from
fixture head within the concrete shaft. Wire leads supplied to base. HID: High
power factor with starting temperatures of -20°F. for PMH and
-40°F. for HPS lamp modes. 26W, 32W, 42W Fluorescent: High power factor
with starting temperature of 0°F.
Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks, each with two nuts,
washers and a rigid pressed board template.
Finish/Color: Finish is Super TGIC thermoset polyester powder coat
paint, 2.5 mil nominal thickness, applied over a titanated zirconium
conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.
Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,
Platinum Silver, or White. Custom colors are available.
CAUTION: Fixtures must be grounded in accordance with national,
state and/or local electrical codes. Failure to do so may result in serious
personal injury.
VSB1C Concrete Shaft Specifications
BOLT CIRCLE DIA.
(1092.2 mm)
MAXIMUM
HEIGHT
ABOVE
GRADE
Specifications
Material: Cement shall conform to current specifications for “Portland Cement.”
ASTM C150, Type I or II. Aggregates shall meet current requirements of
“Specifications for Concrete Aggregates,” ASTM C33. Water shall be clean and
free from deleterious amounts of silt, oil, acids, alkalies or organic materials. Wire
for reinforcement shall conform to ASTM A185. Steel for lugs and plates shall
conform to ASTM A36, or A283 grade D.
Surface: Medium sand-blasted with anti-graffiti sealer. Available colors are
Charcoal, Brown, Natural Gray or White, integral in concrete mix.
Cure and Strength: Allows for completion of the hydration process, and result
in a 28 day compressive strength of not less than 4,500 psi.
Manufacture: Fiberglass molds used to insure uniform parts. Mold parting
lines may be slightly visible in finished parts.
Anchorage: Four steel mounting tabs for installation on four K" x 10" + 2" zinc
electroplated L-hook anchor bolts. Each anchor bolt is supplied with two nuts,
two washers, and a rigid pressed board template.
Shipment: Palletized with adequate hold-downs to prevent load movement in transit.
VSBC same as VSB1C except:
9K" (241.3 mm)
BOLT CIRCLE DIA.
BASE PLAN
VSBC
No fixture, electrical elements or conduit openings.
Listings and Ratings
ULcUL 1598
IP46 Rated
CE
IESNA Rated - Cut Off
IDA Rated - Full Shielded
20
KIM LIGHTING
25C Ambient
VSB1
Vandal esistant S uare Bollards
Ordering Information
Ordering Example:
Fixture
Luminaire
Electrical Module
Finish Option
Fixture
VSB1/ 70PMH120/ BL / HS
1
2
3
Luminaire
Electrical Module
Finish
Concrete
Shaft
Finish Option
Fixture
VSB1C/ 70PMH120/ BL / CH-C/ HS
5
1
2
Fixture with Aluminum Shaft
3
4
Concrete
Finish
VSBC / CH-C
5
1
4
Fixture with Concrete Shaft
Unlighted
Concrete Bollard
VSB1C
Cat. No.: VSBC
1 Fixture:
Cat. No. designates VSB fixture
and shaft.
Cat. No.:
2 Electrical Module:
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
PL = Compact Fluorescent
See lamp and electrical data on
page 69 for ballast types and
characteristics.
Lamp Lamp Line
Watts Type Volts
70
HPS 120
Coated lamps recommended.
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated irconium
conversion coating.
Cat. No.:
VSB1
70PMH120
70PMH208
70PMH240
70PMH277
70PMH347
70HPS120
70HPS208
70HPS240
70HPS277
70HPS347
100PMH120
100PMH208
100PMH240
100PMH277
100PMH347
100HPS120
100HPS208
100HPS240
100HPS277
100HPS347
42PL1201
42PL2081
42PL2401
42PL2771
70PMH120
70PMH208
70PMH240
70PMH277
70PMH347
70HPS120
70HPS208
70HPS240
70HPS277
70HPS347
100PMH120
100PMH208
100PMH240
100PMH277
100PMH347
100HPS120
100HPS208
100HPS240
100HPS277
100HPS347
42PL1201
42PL2081
42PL2401
42PL2771
1
42PL operates one 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.
Color:
Black
Cat. No.: BL
Dark Bronze
DB
Light Gray
LG
Stealth Gray™
SG
Platinum Silver
PS
White
WH
NOTE: Black and Dark Bronze colors will produce slightly less louver
brightness than Light Gray or White. See below.
4 Concrete Finish:
Color:
Cat. No.:
Brown
BR-C
5 Optional Houseside
Cat. No.:
HS
180° trimmable houseside shield that inserts inside lamp enclosure .032" thick natural
aluminum, trimmable in field.
Cat. No.: EM
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
Shield:
6 Optional Emergency
Battery Back-up:
Charcoal
CH-C
Natural Gray
NG-C
White
WH-C
Custom Colors
CC
Consult
representative
for custom colors.
Available colors are
integral in concrete mix.
For Compact Fluorescent only.
7 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up
to 90 minutes of supplemental light. See table at right for
max. lumens output by lamps.
Lamp (4-Pin)
42W
32W
26W
1 lamp lumens
750
575
450
VSB1 models are provided with
matching powder coat paint
finishes on fixture and shaft.
Standard colors are as follows:
Cat. No.:
Color:
BL
DB
LG
SG
PS
Black
Dark Bronze
Light Gray
Stealth Gray™
Platinum Silver
WH
White
KIM LIGHTING
21
VSB2
Vandal Resistant Square Bollards
VSB Models
70 to 100 watt
Medium Base Lamps
42 watt Compact Fluorescent
VSB2 - Dual Function Luminaire (Aluminum Shaft)
Maximum weight: 35 lb
8"
(203.2 mm)
DIA.
8"
(203.2 mm)
7"
10"
(177.8 mm)
(254.0 mm)
3C"
(85.7 mm)
CONDUIT
OPENING
36"
(914.4 mm)
LIGHT
CENTER
HEIGHT
5" (127.0 mm)
43"*
BOLT CIRCLE DIA.
(1092.2 mm)
BASE PLAN
VSB
ALUMINUM SHAFT
*30" OR 36" OVERALL HEIGHT
1K"
AVAILABLE - CONTACT
KIM REPRESENTATIVE
(27K" ABSOLUTE MINIMUM)
(38.1 mm)
ANCHOR BOLT PROJECTION
VSB2C - Dual Function Luminaire (Concrete Shaft)
Maximum weight: 120 lb
8"
(203.2 mm)
DIA.
7"
(177.8 mm)
8"
10"
(203.2 mm)
(254.0 mm)
3C"
43"
(1092.2 mm)
MAXIMUM
HEIGHT
ABOVE
GRADE
(85.7 mm)
CONDUIT
OPENING
30"
(762.0 mm)
MINIMUM
HEIGHT
ABOVE
GRADE
15" (381.0 mm)
MAXIMUM
BURIAL DEPTH
Specifications
Top Cap: One-piece die-cast, low-copper (<0.6% Cu) aluminum F" minimum
thickness, secured to louvers by concealed stainless steel allen screws
in keyhole slots. For relamping access, allen screws shall not require
complete removal.
Louvers: One-piece die-cast, low-copper (<0.6% Cu) aluminum with horizontal
and vertical blades. Horizontal louvers shall provide 270° of down-lighting with
source cutoff above horizontal. Vertical louver shall provide 90° of non-cutoff
lighting. Horizontal louver blades shall have a 1L" depth, and be angled 25° from
the horizontal. Vertical louver blades shall have a 1L" depth with a 45° spacing.
Louver castings shall be secured to shaft by four internal tie rods.
Lamp Enclosure: One-piece tempered molded glass with internal flutes and full
silicone gasketing at bottom edge.
Socket: Porcelain medium base socket rated 4KV for HID and incandescent.
Plastic socket for Fluorescent.
Fixture Head: Allows flow-through ventilation around and above the
lamp enclosure.
Shaft: One-piece extruded aluminum, .156" minimum wall thickness with a heavy
cast aluminum anchor base concealed within the shaft. Hex socket stainless
steel screws shall lock shaft onto the cast anchor base.
Ballast: VSB2 - Factory mounted to rigid harness attached to the anchor base.
Wiring shall be supplied from the socket for field connection to the prewired
ballast components. HID: High power factor with starting temperatures of -20°F.
for PMH and -40°F. for HPS lamp modes. 26W, 32W, 42W Fluorescent: High
power factor with starting temperature of 0°F. VSB2C - Factory mounted to rigid
harness for field wiring and suspension from fixture head within the concrete
shaft. Wire leads supplied to base. HID: High power factor with starting
temperatures of -20°F. for PMH and -40°F. for HPS lamp modes. 26W, 32W,
42W Fluorescent: High power factor with starting temperature of 0°F.
Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks, each with two nuts,
washers and a rigid pressed board template.
Finish/Color: Finish is Super TGIC thermoset polyester powder coat
paint, 2.5 mil nominal thickness, applied over a titanated zirconium
conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.
Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,
Platinum Silver, or White. Custom colors are available.
CAUTION: Fixtures must be grounded in accordance with national,
state and/or local electrical codes. Failure to do so may result in serious
personal injury.
VSB2C Concrete Shaft Specifications
9K" (241.3 mm)
BOLT CIRCLE DIA.
BASE PLAN
VSB
CONCRETE SHAFT
VSBC - Unlighted Concrete Bollard
Maximum weight: 175 lb
8"
(203.2 mm)
43"
(1092.2 mm)
MAXIMUM
HEIGHT
ABOVE
GRADE
Material: Cement shall conform to current specifications for “Portland Cement.”
ASTM C150, Type I or II. Aggregates shall meet current requirements of
“Specifications for Concrete Aggregates,” ASTM C33. Water shall be clean and
free from deleterious amounts of silt, oil, acids, alkalies or organic materials. Wire for
reinforcement shall conform to ASTM A185. Steel for lugs and plates shall conform
to ASTM A36, or A283 grade D.
Surface: Medium sand-blasted with anti-graffiti sealer. Available colors are
Charcoal, Brown, Natural Gray or White, integral in concrete mix.
Cure and Strength: Allows for completion of the hydration process, and result in
a 28 day compressive strength of not less than 4,500 psi.
Manufacture: Fiberglass molds used to insure uniform parts. Mold parting lines
may be slightly visible in finished parts.
Anchorage: Four steel mounting tabs for installation on four K" x 10" + 2" zinc
electroplated L-hook anchor bolts. Each anchor bolt is supplied with two nuts, two
washers, and a rigid pressed board template.
Shipment: Palletized with adequate hold-downs to prevent load movement
in transit.
VSBC same as VSB2C except:
No fixture, electrical elements or conduit openings.
9K" (241.3 mm)
BOLT CIRCLE DIA.
BASE PLAN
VSBC
Listings and Ratings
ULcUL 1598
IP46 Rated
CE
IESNA Rated - Cut Off
IDA Rated - Full Shielded
22
KIM LIGHTING
25C Ambient
VSB2
Vandal esistant S uare Bollards
Ordering Information
Ordering Example:
Fixture
Electrical Module
Luminaire
Finish
Fixture
VSB2 / 70PMH27 / LG
1
2
Concrete
Shaft
Finish
Luminaire
Finish
Electrical Module
VSB2C / 70PMH277 /LG / NG-C
3
1
2
3
Fixture
VSBC / NG-C
4
1
4
Unlighted Concrete
Bollard
Fixture with Concrete Shaft
Fixture with Aluminum Shaft
Concrete
Finish
1 Fixture:
Cat. No. designates VSB fixture
and shaft.
Cat. No.:
2 Electrical Module:
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
PL = Compact Fluorescent
See lamp and electrical data on
page 69 for ballast types and
characteristics.
Lamp Lamp Line
Watts Type Volts
70
HPS 120
Coated lamps recommended.
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated irconium
conversion coating.
Cat. No.:
VSB2
70PMH120
70PMH208
70PMH240
70PMH277
70PMH347
70HPS120
70HPS208
70HPS240
70HPS277
70HPS347
100PMH120
100PMH208
100PMH240
100PMH277
100PMH347
100HPS120
100HPS208
100HPS240
100HPS277
100HPS347
42PL1201
42PL2081
42PL2401
42PL2771
Cat. No.: VSBC
VSB2C
70PMH120
70PMH208
70PMH240
70PMH277
70PMH347
70HPS120
70HPS208
70HPS240
70HPS277
70HPS347
100PMH120
100PMH208
100PMH240
100PMH277
100PMH347
100HPS120
100HPS208
100HPS240
100HPS277
100HPS347
42PL1201
42PL2081
42PL2401
42PL2771
1
42PL operates one 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.
Color:
Black
Cat. No.: BL
Dark Bronze
DB
Light Gray
LG
Stealth Gray™
SG
Platinum Silver
PS
White
WH
NOTE: Black and Dark Bronze colors will produce slightly less louver
brightness than Light Gray or White. See below.
4 Concrete Finish:
Color:
Cat. No.:
Brown
BR-C
5 Optional Houseside
Cat. No.:
HS
180° trimmable houseside shield that inserts inside lamp enclosure .032" thick natural
aluminum, trimmable in field.
Cat. No.: EM
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
Shield:
6 Optional Emergency
Battery Back-up:
Charcoal
CH-C
Natural Gray
NG-C
White
WH-C
Custom Colors
CC
Consult
representative
for custom colors.
Available colors are
integral in concrete mix.
For Compact Fluorescent only.
7 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up
to 90 minutes of supplemental light. See table at right for
max. lumens output by lamps.
Lamp (4-Pin)
42W
32W
26W
1 lamp lumens
750
575
450
VSB2 models are provided with
matching powder coat paint
finishes on fixture and shaft.
Standard colors are as follows:
Cat. No.:
Color:
BL
DB
LG
SG
PS
Black
Dark Bronze
Light Gray
Stealth Gray™
Platinum Silver
WH
White
KIM LIGHTING
23
GEM™
Performance Bollards
Features
Clear lamp placed high in the optical system
Placement of the lamp high in the optical system places the
arc-tube above the horizontal illuminance plane. This reduces
refractor brightness while increasing luminaire efficiency in the
desired luminous zone at 60° from vertical.
Hydro-formed Reflector
Hydro-formed reflector redirects light down onto pathways, away
from viewers’ eyes. Special design features direct light around the
lamp to increase illuminance while eliminating streaks and shadows
in the beam pattern.
Fluted Glass Refractor
Precision molded tempered glass refractor spreads light evenly in
the beam pattern and eliminates shadows from the luminaire’s
support structure.
Stepped Body Baffle
The stepped design of the lower body reduces surface brightness
and provides an attractive texture. Die-cast construction produces
sharp detailing.
Split Beam Optics
Reflector design redirects light away from the lamp and into the
useable beam pattern. This provides high illuminance, without
unnecessary brightness. The optical system is sealed top and
bottom to eliminate the intrusion of dirt and insects.
Shadow-less Lighting
Working in tandem with the upper reflector, the refractor spreads
illuminance laterally. This produces a smooth and even beam
pattern with no shadows from the fixture’s structural elements.
GEM™ Performance vs. Louvered Bollards
GEM™ Bollard
Louvered Bollards (VRB and VSB)
The GEM™ is designed to produce high levels of illuminance and an
attractive lens presence. The visible lens produces a point of
interest and attracts attention. Particularly well suited where bollards
are used to identify and highlight entries or important walkways.
Louvered bollards produce minimal brightness, wide low-level
illumination, and incorporate an optical system protected by heavy
cast louvers. The robust louvered bodies are well suited to vandal
prone areas, and where fixture brightness is undesirable.
(Data is shown for white fixture.)
70W
MH
26
3'
13.4 Fc
KIM LIGHTING
6'
5.4 Fc
9'
1.7 Fc
12'
0.5 Fc
70W
MH
3'
2.4 Fc
6'
4.5 Fc
9'
1.6 Fc
12'
0.61 Fc
GEM™
Performance Bollards
Features
Installation and Mounting Base Details
Aluminum Shaft
Installation in Soil
Electrical
components are
factory mounted and
prewired to a rigid
bracket, bolted to
the anchor base.
Aluminum shaft
twist-locks to the
base casting and
secures with two
recessed allen
screws.
Concrete Shaft
Installation in
Paving or Hardscape
Installation in
Soil
Installation in
Paving or Hardscape
Aluminum shaft
bollards are installed
with anchor bolts in
a poured-in-place
footing (by others).
Internal anchor base
is leveled prior to
installing the shaft.
Electrical
components are
factory mounted and
prewired to a rigid
harness, suspended
within the shaft.
Concrete shaft bollards
are installed with anchor
bolts embedded in a
below grade, poured-inplace footing (by others).
Leveling nuts make
installation and
alignment fast and
accurate. All fastening
hardware must not
contact soil or other
corrosive elements.
Paving
When mounting in
soil, anchor bolt
fasteners and other
hardware must be
protected from soil by
grouting.
Soil
Paving
Soil
Wiring and
footing
(by others).
Wiring and
footing
(by others).
Durable Powder Coat Finish
•
Standard Super TGIC
Colors
Aluminum
•
•
Titanated
Zirconium
Conversion
Coating
Powder Coat
Kim’s state-of-the-art powder coat paint system is engineered to
provide the highest quality finish with absolute paint adhesion under
weather extremes. The Super TGIC thermoset polyester powder
coat finish is applied over a titanated zirconium conversion coating.
This finish system exceeds the A.S.T.M. 1000 hour salt spray test,
enduring over 2500 hours without failure.
BL
Black
DB
Dark Bronze
Eight Stage Finish
LG
Light Gray
1. Power wash and degrease.
5. Clear water rinse bath.
SG
Stealth Gray™
2. Detergent tank bath.
6. Dry off oven.
PS
Platinum Silver
3. Clear water rinse bath.
WH
White
4. Premium titanated zirconium
conversion coating as used in
the automobile industry.
7. Powder coating, 2.5 mil
nominal thickness.
8. Bake for 20 minutes at
410°F.
Construction
The GEM™ lighted head is constructed of die-cast aluminum, with a
molded glass refractor. Four captive, stainless steel fasteners are
concealed from view, yet provide easy access for routine
maintenance. The lens is not disturbed during re-lamping.
The fixture head is secured to the shaft with heavy-duty stainless
steel rods.
KIM LIGHTING
27
GEM™
Performance Bollards
Specifications
GEM1
GEM™ Models
70 to 100 watt HID
Medium Base Lamps
32 watt Compact Fluorescent
GEM1
Maximum weight: 28 lb
9K"
(241.3 mm)
DIA.
5"
8"
(203.2 mm)
DIA.
9K"
(127.0 mm)
(241.3 mm)
3L"
37K"
(95.3 mm)
CONDUIT
OPENING
(952.5 mm)
LIGHT
CENTER
HEIGHT
5" (127.0 mm)
42K"*
BOLT CIRCLE DIA.
(1079.5 mm)
BASE PLAN
GEM
ALUMINUM SHAFT
8" DIA.
(203.2 mm)
*30" OR 36" OVERALL HEIGHT
1K"
AVAILABLE - CONTACT
KIM REPRESENTATIVE
(27K" ABSOLUTE MINIMUM)
(38.1 mm)
ANCHOR BOLT PROJECTION
GEM1C
Maximum weight: 114 lb
9K"
(241.3 mm)
DIA.
8"
5"
(203.2 mm)
DIA.
9K"
(127.0 mm)
(241.3 mm)
3C"
42K"
(85.7 mm)
CONDUIT
OPENING
30K"
(1079.5 mm)
MAXIMUM
HEIGHT
ABOVE
GRADE
(774.7 mm)
MINIMUM
HEIGHT
ABOVE
GRADE
8"
(203.2 mm)
DIA.
16" (406.4 mm)
MAXIMUM
BURIAL DEPTH
9K" (241.3 mm)
BOLT CIRCLE DIA.
BASE PLAN
GEM
CONCRETE SHAFT
Top Cap: Die-cast, low-copper (<0.6% Cu) aluminum secured to rib
body by captive stainless steel allen cap screws. For lamp access, allen
screws shall not require complete removal.
Supports: Die-cast, low-copper (<0.6% Cu) aluminum supports secured
in place as a complete cage assembly. The top section provides a cutoff
lamp compartment. The supports are secured to the shaft by four
stainless steel tie rods.
Refractor: Thermally tempered soda lime glass sealed with silicone
gaskets top and bottom.
Socket: Porcelain medium base socket rated 4KV for HID Plastic socket
for Fluorescent.
Shaft: One-piece aluminum extrusion, .125" minimum wall thickness with
a heavy cast aluminum anchor base concealed within the shaft.
Hex socket stainless steel set screws shall lock the shaft onto the
cast frangible anchor base. See below for GEM1C concrete
shaft specifications.
Ballast: GEM1 - Factory mounted to rigid harness attached to the anchor
base. Wiring shall be supplied from the socket for field connection to the
prewired ballast components. HID: High power factor with starting
temperatures of -20°F. for PMH and -40°F. for HPS lamp modes. 26W and
32W Fluorescent: High power factor with starting temperature of 0°F.
GEM1C - Factory mounted to rigid harness for field wiring and suspension
from fixture head within the concrete shaft. Wire leads supplied to base.
HID: High power factor with starting temperatures of
-20°F. for PMH and -40°F. for HPS lamp modes. 26W and 32W
Fluorescent: High power factor with starting temperature of 0°F. LED: A
total of 9 LED emitters configured in a rectangular array comprised
together as a module. Two (2) modules for 30 watt version; three (3)
modules for 45 watt version; and four (4) modules for 60 watt version.
Available in “Halogen White” (approx. 3500K). Emitters are directly
attached to the electronic driver.
LED Driver: Constant current electronic driver. Rated for
30 watt, 45 watt or 60 watt. Available in 120 volt or 277 volt input.
0°F. starting temperature. All drivers are Underwriters Laboratories
recognized. 120V versions are dimmable.
Anchor Bolts: Four C" x 10" + 2" zinc plated J-bolts, each with two nuts,
washers and a rigid pressed board template.
Finish/Color: Finish is Super TGIC thermoset polyester powder coat
paint, 2.5 mil nominal thickness, applied over a titanated zirconium
conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.
Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,
Platinum Silver, or White. Custom colors are available.
CAUTION: Fixtures must be grounded in accordance with national, state
and/or local electrical codes. Failure to do so may result in serious
personal injury.
GEM1C Concrete Shaft Specifications:
OPTIONAL
HOUSESIDE
SHIELD
5K"
(139.7 mm)
3K"
(88.9 mm)
Listings and Ratings
ULcUL 1598
IP46 Rated
CE
IESNA Rated - Semi Cut Off
28
KIM LIGHTING
25C Ambient
Material: Cement to conform to current specifications for “Portland
Cement.” ASTM C150, Type I or II. Aggregates meet current requirements
of “Specifications for Concrete Aggregates,” ASTM C33. Water to be clean
and free from deleterious amounts of silt, oil, acids, alkalies or organic
materials. Wire for reinforcement to conform to ASTM A185. Steel for lugs
and plates to conform to ASTM A36, or A283 grade D.
Surface: Medium sand-blasted with anti-graffiti sealer. Available colors are
Charcoal, Brown, Natural Gray or White, integral in concrete mix.
Cure and Strength: Allows for completion of the hydration process, and
results in a 28 day compressive strength of not less than 4,500 psi.
Manufacture: Fiberglass molds used to insure uniform parts. Mold
parting lines may be slightly visible in finished parts.
Anchorage: Four steel mounting tabs for installation on four K" x 10" + 2"
zinc electroplated J-bolts. Each anchor bolt is supplied with two nuts, two
washers, and a rigid pressed board template.
Shipment: Palletized with adequate hold-downs to prevent load movement
in transit.
GEM™
Performance Bollards
Ordering Information
Ordering Example:
Fixture
Electrical Module
Luminaire
Finish
Optional
Houseside
Shield
GEM1 / 70PMH277 / PS / HS
1
2
3
5
Fixture
Electrical Module
Luminaire
Finish
Concrete Optional
Shaft
Houseside
Finish
Shield
GEM1C / 70PMH277 / PS / NG-C / HS
1
Fixture with Aluminum Shaft
2
3
4
5
Fixture with Concrete Shaft
1 Fixture:
Cat. No. designates GEM ™
fixture and shaft.
Cat. No.:
70PMH120
70PMH208
70PMH240
70PMH277
70PMH347
100PMH120
100PMH208
100PMH240
100PMH277
100PMH347
2 Electrical Module:
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
PL = Compact Fluorescent
LED = Light Emitting Diode
See lamp and electrical data on
page 69 for ballast types and
characteristics.
30LED120
30LED277
45LED120
45LED277
60LED120
60LED277
Lamp Lamp Line
Watts Type Volts
70
PMH 277
Clear lamps recommended.
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated zirconium
conversion coating.
4 Shaft Finish:
Cat. No.:
GEM1
70HPS120
70HPS208
70HPS240
70HPS277
70HPS347
100HPS120
100HPS208
100HPS240
100HPS277
100HPS347
32PL1201
32PL2081
32PL2401
32PL2771
IES
Type1
30LED120
30LED277
45LED120
45LED277
60LED120
60LED277
IES
Type 3
IES
Type5
Battery Back-up:
32PL1201
32PL2081
32PL2401
32PL2771
IES
Type1
IES
Type 3
IES
Type5
32PL operates one 26 or 32 watt lamp at120 thru 277 volts (50-60 Hz).
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.
Color:
Black
Cat. No.: BL
Dark Bronze
DB
Light Gray
LG
Aluminum Riser (Shaft):
Cat. No.: HS
Shield:
6 Optional Emergency
70HPS120
70HPS208
70HPS240
70HPS277
70HPS347
100HPS120
100HPS208
100HPS240
100HPS277
100HPS347
1
Shaft is finished to match fixture with super
TGIC powder coat paint over titanated
zirconium conversion coating.
5 Optional Houseside
70PMH120
70PMH208
70PMH240
70PMH277
70PMH347
100PMH120
100PMH208
100PMH240
100PMH277
100PMH347
GEM1C
Stealth Gray™
SG
Cat. No.:
CH-C
BR-C
NG-C
WH-C
Platinum Silver
PS
White
WH
Custom Colors
CC
Consult
representative
for custom colors.
Concrete Riser (Shaft):
Charcoal
Brown
Natural Gray
White
90° trimmable houseside shield .032" thick aluminum, painted to match fixture.
Houseside Shield
Cat. No.: EM
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
For Compact Fluorescent only.
7 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up
to 90 minutes of supplemental light. See table at right for
max. lumens output by lamps.
Lamp (4-Pin)
42W
32W
26W
1 lamp lumens
750
575
450
KIM LIGHTING
29
BNB
Bounce Bollard
Configurations
New LED and Traditional Styling Options
Era Lantern Bollards also meet strict IES and IDA full cutoff dark
sky standards, and are constructed with Kim Lighting’s legendary
reputation for quality and durability to last a lifetime.
KimLighting.com offers lighting professionals unlimited
access to the entire Era Lantern series, including specifications,
photometry data, and design tools. Contact your Kim Lighting
representative for additional assistance.
Era Lantern Bollard. This is outdoor lighting perfection. This is Kim
Lighting.Kim Lighting’s exclusive Bounce Bollard series has been
broadened to include several new shaft styles and design details
to further complement Kim Lighting’s extensive Bounce® series of
area, pedestrian scale, and wall-mounted luminaires. And now,
new energy efficient LED modules, up to 60W, are now available
for all Bounce Bollard models.
Unlike typical lantern products that emit the
majority of their light in the horizontal plane, the
Kim Lighting Bounce series employs an
ingenious patented cutoff optical system for
efficient distribution of illumination onto the ground and
incorporates a controlled up-light feature for a
comfortable, subtle, and unique nighttime presence. Kim
Lighting’s Bounce Bollard series is perfect for pedestrian zones,
congregation points, pathways, perimeters, or other lower-mount
and landscape applications, and is ideal for traditional or
contemporary architecture requiring a striking European accent.
Visit www.kimlighting.com for complete specification,
ordering, and photometry information on the entire
Bounce family of luminaires.
BNB1
BNB2
BNB3
BNB4
BNB5
BNB6
KIM LIGHTING
31
BNB
Features
Bounce Bollard
Easy Re-lamping
Lamp access is easily achieved
by hinging open the hood. The
hood is retained by a stainless
steel hinge, and three stainless
steel captive screws concealed
from normal view. Hood is fully
sealed against moisture and
insects by a one-piece silicone
gasket, creating a totally sealed
optical chamber.
Performance Optics
For glare control, the Bounce
Bollard utilizes a flat lens,
horizontal lamp optical system.
The cap produces bounce light
to illuminate pedestrians or
surrounding vertical elements.
Due to the low mounting height,
coated lamps are recommended
for optimum uniformity on the
ground.
Optional Matte Black Cap
For locations where complete
cutoff is desired, an optional
matte black cap is available.
If a very low nighttime fixture
presence is desired, it is
recommended that a black or
dark bronze finish be used for
the entire bollard.
Quick and Easy Installation
A heavy-duty cast aluminum
base plate is mounted to four
anchor bolts and leveled with
leveling nuts. Field wire
connections are made to the
attached electrical components
before the bollard shaft is
installed. A pressed board
template is provided to secure
and position the anchor bolts
during the concrete pour.
Heavy-Duty Base
A heavy cast aluminum base is
mechanically fastened to the
extruded shaft for superior
strength, and elimination of
unsightly welds. The base, and
entire bollard, fastens to the
pre-mounted base plate by four
blackened stainless steel bolts.
KIM LIGHTING
33
BNB
Bounce Bollard
Specifications
BNB Model
70 to 100 watt PMH
70 to 100 watt HPS
Medium Base Lamps
42 watt CFL
30 to 60 watt LED
12" DIA.
(304.8 mm)
12" DIA.
(304.8 mm)
3C"
3C"
(85.7 mm)
(85.7 mm)
11"
12B"
(279.4 mm)
(308.0 mm)
5" DIA.
5F" DIA.
(127.0 mm)
(131.8 mm)
BNB 1/2/3
5" DIA.
(127.0 mm)
BNB 4/5/6
5" DIA.
(127.0 mm)
5" DIA.
(127.0 mm)
28"
28"
28"
(711.2 mm)
(711.2 mm)
(711.2 mm)
9C" DIA.
(238.1 mm)
9C" DIA.
(238.1 mm)
Straight - BNB 1/4 Fluted - BNB 2/5
10L" DIA.
(273.1 mm)
Traditional - BNB 3/6
2G" x 3O"
3L" x 1L"
CONDUIT OPENING
CONDUIT OPENING
5" BOLT
CIRCLE DIA.
8N" DIA.
(217.5 mm)
5" BOLT
CIRCLE DIA.
10B" DIA.
(257.2 mm)
Hood and Lens Frame: Die-cast, low copper (<0.6% Cu) aluminum alloy
with stainless steel hinge. Hood is opened by loosening one stainless
steel captive button-head socket cap screw. F" thick clear flat tempered
glass lens seals against the lens frame by a one-piece molded silicone
gasket. Lens frame seals against the hood by a one-piece extruded and
vulcanized silicone gasket.
Reflector Module: Specular Alzak® optical segments are rigidly mounted
within an aluminum frame and fastened securely to the hood. A porcelain
medium base socket rated 4KV is provided for HID, and a GX24q-4
universal socket is provided for fluorescent.
Body Support: BNB1, BNB2, BNB3: Die-cast, low copper alloy (<0.6%
Cu) aluminum flanges compress a ribbed extruded aluminum chamber.
The four heavy wall extruded aluminum support rods are mechanically
fastened to the lens frame with stainless steel fasteners. The support rods
are held in position through die-cast arms and mechanically fastened at
the bottom with a custom aluminum bolt. The electrical wiring is
channeled through a support rod with a brass bushing. BNB4, BNB5,
BNB6: Heavy low copper alloy (<0.6% Cu) cast aluminum wiring
chamber. The four extruded aluminum support rods are mechanically
fastened between the lens frame and wiring chamber with stainless steel
bolts. The wiring is channeled through the support rods.
Body Cap: Die-cast, low copper (<0.6% Cu) aluminum, retained by two
captive stainless steel screws. Optional matte black finish to eliminate
bounce light. See page 35.
Shaft: BNB1, BNB4: One-piece aluminum extrusion, .125" minimum wall
thickness and two internal F" - 16 mounting rods sandwich shaft
between base and head. Four internal stainless steel hex-head bolts
secure the shaft to the anchor base plate. BNB2, BNB5: One-piece
fluted aluminum extrusion, .188" minimum wall thickness and two internal
F" - 16 mounting rods sandwich shaft between base and head. Four
internal stainless steel hex-head bolts secure the shaft to the anchor base
plate. BNB3, BNB6: One-piece cast aluminum.188" minimum wall
thickness and two internal F" - 16 mounting rods sandwich shaft
between base and head.
Anchor Base Plate: A heavy cast aluminum anchor base is provided for
mounting to the four C" x 10" + 2" zinc plated J-bolts, each with two nuts
and washers. A rigid pressed board template is provided to secure the
anchor bolts during concrete pour (5" B.C.D.)
Electrical Module: Factory mounted to a rigid harness attached to the
Anchor Base. HID: High Power Factor with starting temperatures of
-20°F for PMH and -40°F for HPS lamp modes. Fluorescent: High Power
Factor with starting temperature of 0°F. LED: A total of 9 LED emitters
configured in a rectangular array comprised together as a module. Two
(2) modules for 30 watt version; three (3) modules for 45 watt version; and
four (4) modules for 60 watt version. Available in “Halogen White”
(approx. 3500K). Emitters are directly attached to the electronic driver.
LED Driver: Constant current electronic driver. Rated for 30 watt, 45 watt
or 60 watt. Available in 120 volt or 277 volt input. 0°F. starting
temperature. All drivers are Underwriters Laboratories recognized. 120V
versions are dimmable.
Finish/Color: Finish is Super TGIC thermoset polyester powder coat
paint, 2.5 mil nominal thickness, applied over a titanated zirconium
conversion coating; 2500 hour salt spray test endurance rating. Standard
colors are Black, Dark Bronze, Light Gray, Stealth Gray™, Platinum Silver,
or White. Custom colors are available.
CAUTION: Fixtures must be grounded in accordance with national, state
and/or local electrical codes. Failure to do so may result in serious
personal injury.
Listings and Ratings
ULcUL 1598
IP46 Rated
CE
IESNA Rated - Full Cut Off
IDA Rated - Full Shielded
34
KIM LIGHTING
25C Ambient
BNB
Bounce Bollard
Ordering Information
Ordering Example:
Fixture
Luminaire
Finish
Electrical Module
Options
BNB1 / 70PMH120 / BL / HS
1
2
3
4-5
1 Fixture:
Cat. No. designates BNB fixture.
Cat. No.:
BNB1
2 Electrical Module:
70PMH120
70PMH208
70PMH240
70PMH277
70PMH347
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
PL = Compact Fluorescent
LED = Light Emitting Diode
See lamp and electrical data on
page 69 for ballast types and
characteristics.
BNB2
BNB3
100PMH120
100PMH208
100PMH240
100PMH277
100PMH347
BNB4
70HPS120
70HPS208
70HPS240
70HPS277
70HPS347
BNB5
100HPS120
100HPS208
100HPS240
100HPS277
100HPS347
BNB6
42PL1201 30LED120
42PL2081 30LED277
42PL2401
42PL2771 45LED120
45LED277
IES
Type1
60LED120
60LED277
IES
Type5
IES
Type 3
42PL operates one 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).
1
Lamp Lamp Line
Watts Type Volts
70
PMH 120
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local
Kim representative.
Coated lamps recommended.
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated zirconium
conversion coating.
4 Optional Houseside
Color: Black
Cat. No.: BL
Dark Bronze
DB
Cat. No.: HS
Optional shield made of stamped louvered aluminum allows streetside light to pass while
blocking houseside light. Blackened reflector panels within the reflector also reduces the
houseside reflection.
Shield:
Light Gray
LG
Stealth Gray™
SG
Platinum Silver
PS
White
WH
Custom Colors
CC
Consult representative
for custom colors.
Houseside Shield
Line Volts:
Cat. No.:
5 Optional Fusing:
6 Optional StarView™
Cat. No.:
BBC
Matte Black Body Cap:
7 Optional Emergency
Battery Back-up:
Cat. No.: EM
120V
SF
208V
DF
240V
DF
277V
SF
347V
SF
For locations where complete cutoff optical control is desired, an Optional Matte Black Body
Cap can be specified. This significantly reduces the indirect up-light distribution, providing
complete cutoff. To further reduce the nighttime visual presence of the fixture, specify Black or
Dark Bronze luminaire finish.
Optional Cap
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
For Compact Fluorescent only.
8 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up to 90 minutes of supplemental
light. See table at right for max. lumens output by lamps.
Lamp (4-Pin) 1 lamp lumens
42W
32W
26W
750
575
450
KIM LIGHTING
35
LE
Era® Lantern Bollard
Configurations
Choose One of Three Shaft Styles
Timeless, high performance historical lighting integration
throughout the site is now possible with Kim Lighting’s Era
Lantern luminaire collection, which now includes an
authentically detailed replica bollard series to complete the class.
Traditionally, “form before function” was the conventional
approach to historic luminaire design, however Era Lantern
Bollard optics are unmatched by any other period pathway
luminaire. Era Lantern Bollards feature high 95% reflectivity,
precise light distributions, advanced Pulse Start Metal Halide,
HPS, CFL and LED options, and battery back-up modules for
emergency illumination.
LE1
LE2
Era Lantern Bollards also meet strict IES and IDA
full cutoff dark sky standards, and are
constructed with Kim Lighting’s legendary
reputation for quality and durability to last
a lifetime.
KimLighting.com offers lighting professionals unlimited
access to the entire Era Lantern series, including specifications,
photometry data, and design tools. Contact your Kim Lighting
representative for additional assistance.
Era Lantern Bollard. This is outdoor lighting perfection. This is
Kim Lighting.
LE3
KIM LIGHTING
37
LE
Era® Lantern Bollard
Specifications
LE Model
70 to 100 watt PMH
70 to 100 watt HPS
Medium Base Lamps
42 watt CFL
30, 45 or 60 watt LED
Hood and Lens Frame: Die-cast, low copper (<0.6% Cu) aluminum
alloy with stainless steel hinge. Hood is opened by loosening
one stainless steel captive button-head socket cap screw. F" thick clear
flat tempered glass lens seals against the lens frame by a one-piece
molded silicone gasket. Lens frame seals against the hood by a
one-piece extruded and vulcanized silicone gasket.
Arm: Double curved die-cast, low copper aluminum alloy with
internal wiring chamber supports the hood and lens frame.
11K" DIA.
(292.1 mm)
Hub: Die-cast, low copper aluminum alloy with a die cast access
cover. The hub is designed to support the arms.
4N"
Reflector Module: Specular Alzak® optical segments are rigidly mounted
within an aluminum frame and fastened securely to the hood. A porcelain
medium base socket rated 4KV is provided for HID, and a GX24q-4
universal socket is provided for fluorescent. No reflector provided for LED.
(115.8 mm)
9D"
(244.5 mm)
Anchor Base Plate: A heavy cast aluminum anchor base plate is
provided for mounting to the four C" x 10" + 2" zinc plated J-bolts,
each with two nuts and washers. A rigid pressed board template is
provided to secure the anchor bolts during concrete pour. 5" B.C.D.
rods sandwich shaft between base and head.
5B" DIA.
(130.2 mm)
LE 1/2/3
5" DIA.
(127.0 mm)
5" DIA.
(127.0 mm)
5" DIA.
(127.0 mm)
28"
28"
28"
(711.2 mm)
(711.2 mm)
(711.2 mm)
9C" DIA.
(238.1 mm)
Smooth - LE1
9C" DIA.
(238.1 mm)
10L" DIA.
Fluted - LE2
Traditional - LE3
(273.1 mm)
2G" x 3O"
3L" x 1L"
CONDUIT OPENING
CONDUIT OPENING
5" BOLT
CIRCLE DIA.
5" BOLT
CIRCLE DIA.
Electrical Module: Factory mounted to a rigid assembly attached to the
anchor base. HID: High Power Factor with starting temperatures of
-20°F for PMH and -40°F for HPS lamp modes. Fluorescent: High Power
Factor with starting temperature of 0°F. LED: A total of 9 LED emitters
configured in a rectangular array comprised together as a module.
Two (2) modules for 30 watt version; three (3) modules for 45 watt
version; and four (4) modules for 60 watt version. Available in
“Halogen White” (approx. 3500K). Emitters are directly attached to
the electronic driver.
LED Driver: Constant current electronic driver. Rated for
30 watt, 45 watt or 60 watt. Available in 120 volt or 277 volt input.
0°F. starting temperature. All drivers are Underwriters Laboratories
recognized. 120V versions are dimmable.
Riser: Smooth – The Riser assembly is a one-piece smooth
aluminum extrusion (.188" minimum wall thickness) and a heavy cast
aluminum base cover. Two internal C" mounting rods sandwich riser
between base and hub. Fluted – The riser assembly is a one-piece
fluted aluminum extrusion (.188" minimum wall thickness) and a
heavy cast aluminum base cover. Two internal C" mounting rods
sandwich riser between base and hub. Traditional – The riser is a
heavy cast aluminum base cover. Two internal C" mounting rods
sandwich riser between base and hub.
Finish/Color: Finish is Super TGIC thermoset polyester powder coat
paint, 2.5 mil nominal thickness, applied over a titanated zirconium
conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.
Standard colors are Black, Dark Bronze, Light Gray, Platinum Silver, or
White. Custom colors are available.
CAUTION: Fixtures must be grounded in accordance with national, state
and/or local electrical codes. Failure to do so may result in serious
personal injury.
1
ULcUL 1598
8N" DIA.
(217.5 mm)
1
Suitable for wet locations.
38
KIM LIGHTING
CE
IESNA Rated - Full Cut Off
IDA Rated - Full Shielded
10B" DIA.
(257.2 mm)
Listings and Ratings
IP46 Rated
25C Ambient
LE
Era Lantern Bollard
Ordering Information
Ordering Example:
Fixture
Luminaire
Finish
Electrical Module
Options
LE1 / 70PMH120 / BL / HS
1
2
3
4-5
LE2
LE3
1 Fixture:
Cat. No. designates BNB fixture.
Cat. No.:
2 Electrical Module:
LE1
70PMH120
70PMH208
70PMH240
70PMH277
70PMH347
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
PL = Compact Fluorescent
LED = Light Emitting Diode
See lamp and electrical data on
page 69 for ballast types and
characteristics.
100PMH120
100PMH208
100PMH240
100PMH277
100PMH347
70HPS120
70HPS208
70HPS240
70HPS277
70HPS347
100HPS120
100HPS208
100HPS240
100HPS277
100HPS347
42PL1201 30LED120
42PL2081 30LED277
42PL2401
42PL2771 45LED120
45LED277
IES
Type1
60LED120
60LED277
IES
Type5
IES
Type 3
42PL operates one 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).
1
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local
Kim representative.
Lamp Lamp Line
Watts Type Volts
70
PMH 120
Coated lamps recommended.
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated zirconium
conversion coating.
4 Optional Houseside
Color: Black
Cat. No.: BL
Dark Bronze
DB
Cat. No.: HS
Optional shield made of stamped louvered aluminum allows streetside light to pass while
blocking houseside light. Blackened reflector panels within the reflector also reduces the
houseside reflection.
Shield:
Light Gray
LG
Stealth Gray™
SG
Platinum Silver
PS
White
WH
Custom Colors
CC
Consult representative
for custom colors.
Houseside Shield
Line Volts:
Cat. No.:
5 Optional Fusing:
6 Lantern Enclosures:
Cat. No.: LS
Cat. No.: A
120V
SF
208V
DF
240V
DF
277V
SF
347V
SF
Lexan molded high transmission luminous white enclosure replaces standard glass lens.
Acrylic molded high transmission luminous white acrylic enclosure replaces standard glass lens.
Optional lantern
enclosure
7 Optional Emergency
Battery Back-up:
Cat. No.: EM
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
For Compact Fluorescent only.
8 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up
to 90 minutes of supplemental light. See table at right for
max. lumens output by lamps.
Lamp (4-Pin)
42W
32W
26W
1 lamp lumens
750
575
450
KIM LIGHTING
39
B30
Traditional Bollard
Features
High Performance and
Low Glare
The exclusive Kim optical
Louver system achieves a
broad light distribution with
low glare. A high degree of
visibility is attained, allowing
lower wattages and greater
fixture spacings for energy
conservation and cost reduction.
Clean Detailing
Kim bollards are clean, simple,
unobtrusive forms that look
as good up close as they do
from a distance. A precision
look is attained with careful
attention to detail such as flush
joints, counter sunk fasteners,
and quality components.
Quick and Easy installation
Easy Re-lamp
Bollards utilize a mounting ring
containing the ballast and
related electrical components.
This ring is attached to the
anchor bolts, leveled, and
field wire connections are
made prior to mounting
the fixture.
Direct access to the lamp is
achieved by simply removing
the top.
Concealed Mounting
Simple Maintenance
Bollard mounting hardware
utilizes a twist-lock base
connection with concealed
fasteners and set-screws.
With the top removed, all
major components are readily
accessible for cleaning or
replacement. Reflectors are
mounted as a completely
self-contained sub-assembly.
KIM LIGHTING
41
B30
Traditional Bollard
Specifications
B30
B30 Model
70 to 100 watt Pulse Start Metal Halide
70 to 100 watt High Pressure Sodium
Medium Base Lamps
42 watt Compact Fluorescent
B30
Maximum weight: 30 lb
8" DIA.
(203.2 mm)
6"
8" DIA.
(203.2 mm)
9"
(152.4 mm)
(228.6 mm)
36"
(914.4 mm)
LIGHT
CENTER
HEIGHT
3L"
(95.3 mm)
CONDUIT
OPENING
42"*
(1066.8 mm)
5" (127.0 mm)
BOLT CIRCLE DIA.
BASE PLAN
B30
*30" OR 36" OVERALL HEIGHT
1K"
(38.1 mm)
ANCHOR BOLT
PROJECTION
OPTIONAL
HOUSESIDE
SHIELD
AVAILABLE - CONTACT
KIM REPRESENTATIVE
Top Cap: One-piece heavy gauge spun aluminum retained by two
countersunk captive socket head fasteners, braced at outer edges by
optical assembly. L" thick insulation provided above lamp.
Plastic Enclosure: V825-HID acrylic, optically clear, J" nominal wall,
one-piece injection molded retained in an unstressed position by internal
support through reflector assembly.
Optical Assembly: Precision hydroformed optical louvers with specular
Alzak® finish, removable as a one piece self-contained unit.
Socket: Porcelain with nickel plated socket shell, rated 600 volts.
4KV pulse rated socket. Fluorescent is 42W-G24q-4 - Universal Socket.
Shaft: One-piece extruded aluminum, wall thickness, .125" with heavy
cast aluminum twist-lock anchor base concealed within post. Post locks
to base with (2) C" stainless steel cone point set screws.
Gasketing: Fixture is silicone gasketed for weathertight operation.
Wiring: Supplied with high temperature socket leads for field connection
to the prewired ballast components.
Ballast: Factory mounted to rigid harness attached to the anchor base.
Wiring shall be supplied from the socket for field connection to the prewired
ballast components. HID: High power factor with starting temperatures of
-20°F. for PMH and -40°F. for HPS lamp modes. 26W, 32W, 42W
Fluorescent: High power factor with starting temperature of 0°F.
Anchor Bolts: Four C" x 10" + 2" zinc electro-plated L-hook anchor bolts,
each with two nuts and washers and a rigid pressboard template.
Finish/Color: Finish is Super TGIC thermoset polyester powder coat
paint, 2.5 mil nominal thickness, applied over a titanated zirconium
conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.
Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,
Platinum Silver, or White. Custom colors are available.
CAUTION: Fixtures must be grounded in accordance with national, state
and/or local electrical codes. Failure to do so may result in serious
personal injury.
160°
Listings and Ratings
ULcUL 1598
IP46 Rated
CE
IESNA Rated - Non Cut Off
42
KIM LIGHTING
25C Ambient
B30
Traditional Bollard
Ordering Information
Ordering Example:
Fixture
Electrical Module
Luminaire
Finish
B30-8R / 70HPS120 / BL
1
2
Options
/ HS
3
4-5
1 Fixture:
Cat. No. designates B30 fixture.
Cat. No.:
70PMH120
70PMH208
70PMH240
70PMH277
70PMH347
2 Electrical Module:
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
PL = Compact Fluorescent
Coated lamps recommended.
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated zirconium
conversion coating.
4 Optional Houseside
100PMH120
100PMH208
100PMH240
100PMH277
100PMH347
70HPS120
70HPS208
70HPS240
70HPS277
70HPS347
100HPS120
100HPS208
100HPS240
100HPS277
100HPS347
42PL1201
42PL2081
42PL2401
42PL2771
See lamp and electrical data on
page 69 for ballast types and
characteristics.
Lamp Lamp Line
Watts Type Volts
70
HPS 120
B30
42PL operates one 26, 32, or 42 watt lamp at120 thru 277 volts (50-60 Hz).
1
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim
representative.
Color:
Black
Cat. No.: BL
Cat. No.: HS
Shield:
Dark Bronze
DB
Light Gray
LG
Stealth Gray™
SG
Platinum Silver
PS
White
WH
Custom Colors
CC
Consult
representative
for custom colors.
Eliminates backlight in unwanted areas such as ad acent property, or wherever an asymmetric
light distribution is desired. Constructed of sheet aluminum covering a 160° arc. Finished to
match the fixture. Shield is fully ad ustable about a 360° rotation.
Houseside Shield
5 Optional
Cat. No.: LC
Polycarbonate
Enclosure:
Clear Polycarbonate
CAUTION: Use only when vandalism is anticipated to be high. Useful life is limited due to
yellowing caused by UV from sunlight and HID lamps.
Polycarbonate enclosure
6 Optional Emergency
Battery Back-up:
Cat. No.: EM
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
For Compact Fluorescent only.
7 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up
to 90 minutes of supplemental light. See table at right for
max. lumens output by lamps.
Lamp (4-Pin)
42W
32W
26W
1 lamp lumens
750
575
450
KIM LIGHTING
3
SL
Site Lightforms®
Full Cutoff Optics in SL1 - SL4
For projects requiring full cutoff pole-mounted luminaires for light
trespass or dark-sky considerations, the SL1 - SL4 maintains this
theme at the pedestrian level. Each SL fixture has an optical module
engineered to produce an asymmetric light distribution using a
horizontal lamp, and flat tempered glass lens. Because of the low
mounting height, coated HID lamps are recommended for optimum
uniformity of illumination.
Heavy-Wall Cast Aluminum Heads
Kim SL fixtures are specifically designed and engineered to
combine contemporary form with rugged vandal-resistant
construction. Low level luminaires are often subject to abuse
because of their proximity to pedestrian traffic. To combat this, all
fixture heads are heavy-wall one-piece aluminum castings.
SL models use concealed mechanical head-to-shaft connections for
greater strength and clean detailing. SL1 - SL4 models use flat
tempered glass lenses, and SL5 and SL6 models use flat
polycarbonate lenses.
One-Piece Extruded Aluminum Shafts
To achieve a clean sharp-cornered architectural appearance with
superior strength, all SL shafts are one-piece heavy-wall aluminum
extrusions. Integral mounting tracks are incorporated for mechanical
attachment of the head and base, which provides superior strength
over welding.
Low Profile, High Strength Base
The SL mounting base is unique in the lighting industry, combining
superior strength with a low-profile design. The shaft-to-base
attachment is by concealed bolts threaded into the shaft extrusion.
Kim tests show this method to be twice the strength of a welded
connection. Anchor bolts are provided with couplings, allowing
standard black stainless steel bolts to secure the base and
eliminate unsightly protruding anchor bolts.
See page 47 for anchor bolt and installation details.
46
KIM LIGHTING
Features
SL
Site Lightforms®
Installation Details
Anchor Bolts and Template
Template screw. Replaced with black
stainless steel bolt at fixture installation.
All SL models are supplied
complete with anchor bolts and
rigid template. The unique anchor
bolt system employs female
threaded couplings that allow
the standard black stainless steel
bolts to secure the base,
eliminating unsightly protruding
anchor bolts.
Template
Female Coupling
Jam Nut
Anchor Bolt
Installation in Planted Areas
When SL fixtures are to be installed
in planted areas, slightly elevate
the base to avoid prolonged
submersion during heavy rains or
irrigation. Allow ground cover or
shrubbery to conceal the base.
In this application, the template
elevation must allow for any top soil
or mulch that will be added.
The SL template is the same size
as the fixture base, and can be
used to shape the concrete footing
to blend with the base casting.
A carefully leveled template will
provide a smooth flat mounting
surface and a level fixture.
Level template and footing
Finished
Grade
Ground
Cover
Template
Top
Soil
Conduit
System
(by others)
Anchor Bolt
Installation
Conduit
System
(by others)
Concrete and
Soil Engineering
(by others)
Finished
Installation
Installation in Paved Areas
SL fixtures are easily installed in
paved areas with an option of a
standard or concealed base detail.
For standard base installations,
the concrete footing is poured with
the template at finished grade level.
While the SL base casting is very
low in profile, it can also be totally
concealed by paving up to the
fixture shaft. Although a concealed
base detail is aesthetically very
clean, it must be remembered
that future removal will be difficult
if required.
Level template and footing
Finished
Grade
Finished
Grade
Expansion
Joint
Expansion
Joint
Template
Paving
Conduit
System
(by others)
Anchor Bolt
Installation,
Standard Base.
Conduit
System
(by others)
Concrete and
Soil Engineering
(by others)
Anchor Bolt
Installation,
Concealed Base.
Finished
Installation,
Standard Base.
Finished
Installation,
Concealed Base.
KIM LIGHTING
47
SL1
Site Lightforms®
Specifications
Head: One-piece cast, low-copper (<0.6% Cu) aluminum, F" wall
thickness with external reveal unifying head and shaft. Attachment to
shaft is by four bolts concealed within the head.
SL1 Model
50 to 70 watt HID
Medium Base Lamps
42 watt Compact Fluorescent
Shaft: One-piece extruded aluminum with internal tracks for attaching
head and base.
Base: One-piece cast, low-copper (<0.6% Cu) aluminum secured to
shaft by four concealed stainless steel bolts.
SL1
Maximum weight: 37 lb
8"
8E"
(203.2 mm)
(225.4 mm)
3B"
(79.4 mm)
4K"
Lens: Clear flat B" thick tempered glass retained by two stainless steel
brackets, and four stainless steel, hex socket cap screws, fully gasketed.
(114.3 mm)
37K"
(952.5 mm)
LIGHT
CENTER
HEIGHT
42"*
(1066.8 mm)
*36" OVERALL HEIGHT
AVAILABLE - CONTACT
KIM REPRESENTATIVE
8"
(203.2 mm)
Finish/Color: Finish is Super TGIC thermoset polyester powder coat
paint, 2.5 mil nominal thickness, applied over a titanated zirconium
conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.
Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,
Platinum Silver, or White. Custom colors are available.
8K" (215.9 mm)
BOLT CIRCLE DIA.
BASE PLAN
SL1
CAUTION: Fixtures must be grounded in accordance with national, state
and/or local electrical codes. Failure to do so may result in serious
personal injury.
Listings and Ratings
IP46 Rated
CE
IESNA Rated - Full Cut Off
IDA Rated - Full Shielded
48
KIM LIGHTING
Ballast: Factory mounted to rigid harness suspended from fixture head
within the shaft. Wire leads supplied to base. HID: High power factor with
starting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes.
13W Fluorescent: 120V 32°F. starting; 277V 0°F. starting.
26W, 32W, 42W Fluorescent: High power factor with starting
temperature of 0°F. LED: A total of 9 LED emitters configured in a
rectangular array comprised together as a module. Two (2) modules
for 30 watt version; and four (4) modules for 60 watt version.
Available in “Halogen White” (approx. 3500K). Emitters are directly
attached to the electronic driver.
LED Driver: Constant current electronic driver. Rated for
30 watt, or 60 watt. Available in 120 volt or 277 volt input.
0°F. starting temperature. All drivers are Underwriters Laboratories
recognized. 120V versions are dimmable.
Anchor Bolts: Four C" x 10"+2" zinc plated L-hooks complete with
leveling nuts, washers, couplings, rigid pressed board template and
black stainless steel bolts.
9D"
(244.5 mm)
ULcUL 1598
Reflector and Socket: Formed specular Alzak® reflector panels secured
to a harness which holds a porcelain medium base 4KV socket
(HID and Incandescent), GX24q-4 - Universal Socket (42W Fluorescent),
or two single-ended twin tube sockets (13W Fluorescent).
25C Ambient
SL1
Site Lightforms
Ordering Information
Ordering Example:
Fixture
Electrical Module
Luminaire
Finish
SL1 / 50PMH277 / WH
1
2
3
1 Fixture:
Cat. No. designates SL fixture.
Cat. No.:
2 Electrical Module:
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
SL1
50PMH120
50PMH277
70PMH120
70PMH277
50HPS120
50HPS277
70HPS120
70HPS277
60INC120
13PL1201
13PL2771
42PL1202
42PL2082
42PL2402
42PL2772
30LED120
30LED277
INC = Incandescent
PL = Compact Fluorescent
60LED120
60LED277
LED = Light Emitting Diode
See lamp and electrical data on
page 69 for ballast types and
characteristics.
Lamp Lamp Line
Watts Type Volts
50
PMH 277
Coated lamps recommended.
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated zirconium
conversion coating.
4 Optional Emergency
Battery Back-up:
Two lamps re uired per fixture.
42PL operates one 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).
1
2
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.
Color:
Black
Cat. No.: BL
Cat. No.: EM
Dark Bronze
DB
Light Gray
LG
Stealth Gray™
SG
Platinum Silver
PS
White
WH
Custom Colors
CC
Consult
representative
for custom colors.
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
For Compact Fluorescent only.
5 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up to 90 minutes of supplemental
light. See table at right for max. lumens output by lamps.
Lamp (4-Pin)
42W
32W
26W
1 lamp lumens
750
575
450
KIM LIGHTING
9
SL2
Site Lightforms®
Specifications
Head: One-piece cast, low-copper (<0.6% Cu) aluminum, F" wall
thickness with external reveals to unify head and shaft. Attachment to
shaft is by four bolts concealed within the head.
SL2 Model
50 to 70 watt HID
Medium Base Lamps
42 watt Compact Fluorescent
Shaft: One-piece extruded aluminum with internal tracks for attaching
head and base.
Base: One-piece cast, low-copper (<0.6% Cu) aluminum secured to
shaft by four concealed stainless steel bolts.
SL2
Maximum weight: 47 lb
8"
21"
(203.2 mm)
(533.4 mm)
Reflector and Socket: (Typical of two) Formed specular Alzak® reflector
panels secured to a harness which holds a porcelain medium
base 4KV socket (HID and Incandescent), GX24q-4 - Universal Socket
(42W Fluorescent), or two single-ended twin tube sockets
(13W Fluorescent).
4K"
(114.3 mm)
Lens: Clear flat B" thick tempered glass retained by two stainless steel
brackets, and four stainless steel, hex socket cap screws, fully gasketed.
37K"
(952.5 mm)
LIGHT
CENTER
HEIGHT
42"*
(1066.8 mm)
3B"
(79.4 mm)
*36" OVERALL HEIGHT
AVAILABLE - CONTACT
KIM REPRESENTATIVE
8"
(203.2 mm)
9D"
Ballast: Factory mounted to rigid harness suspended from fixture head
within the shaft. Wire leads supplied to base. HID: High power factor with
starting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes.
13W Fluorescent: 120V 32°F. starting; 277V 0°F. starting.
26W, 32W, 42W Fluorescent: High power factor with starting
temperature of 0°F. LED: A total of 9 LED emitters configured in a
rectangular array comprised together as a module. Two (2) modules
for 30 watt version; and four (4) modules for 60 watt version.
Available in “Halogen White” (approx. 3500K). Emitters are directly
attached to the electronic driver.
LED Driver: Constant current electronic driver. Rated for
30 watt, or 60 watt. Available in 120 volt or 277 volt input.
0°F. starting temperature. All drivers are Underwriters Laboratories
recognized. 120V versions are dimmable.
Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks complete with
leveling nuts, washers, couplings, rigid pressed board template and
black stainless steel bolts.
(244.5 mm)
8K" (215.9 mm)
Finish/Color: Finish is Super TGIC thermoset polyester powder coat
paint, 2.5 mil nominal thickness, applied over a titanated zirconium
conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.
Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,
Platinum Silver, or White. Custom colors are available.
BOLT CIRCLE DIA.
BASE PLAN
SL2
CAUTION: Fixtures must be grounded in accordance with national, state
and/or local electrical codes. Failure to do so may result in serious
personal injury.
Listings and Ratings
ULcUL 1598
IP46 Rated
CE
IESNA Rated - Full Cut Off
IDA Rated - Full Shielded
50
KIM LIGHTING
25C Ambient
SL2
Site Lightforms
Ordering Information
Ordering Example:
Fixture
Electrical Module
Luminaire
Finish
SL2 / 50PMH277 / WH
1
2
3
1 Fixture:
Cat. No. designates SL fixture.
Cat. No.:
2 Electrical Module:
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
SL2
50PMH1201
50PMH2771
70PMH1201
70PMH2771
50HPS1201
50HPS2771
70HPS1201
70HPS2771
60INC1201
13PL1202
13PL2772
42PL1201,3
42PL2081,3
42PL2401,3
42PL2771,3
60LED120
60LED277
INC = Incandescent
LED = Light Emitting Diode
See lamp and electrical data on
page 69 for ballast types and
characteristics.
120LED120
120LED277
Two lamps re uired per fixture.
Four lamps re uired per fixture.
3
42PL operates 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).
1
2
Lamp Lamp Line
Watts Type Volts
50
PMH 277
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.
Coated lamps recommended.
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated zirconium
conversion coating.
4 Optional Emergency
Battery Back-up:
Color:
Black
Cat. No.: BL
Cat. No.: EM
Dark Bronze
DB
Light Gray
LG
Stealth Gray™
SG
Platinum Silver
PS
White
WH
Custom Colors
CC
Consult
representative
for custom colors.
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
For Compact Fluorescent only.
5 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up to 90 minutes of supplemental
light. See table at right for max. lumens output by lamps.
Lamp (4-Pin)
42W
32W
26W
1 lamp lumens
750
575
450
KIM LIGHTING
51
SL3
Site Lightforms®
Specifications
Head: One-piece cast, low-copper (<0.6% Cu) aluminum, F" wall
thickness with external reveal unifying head and shaft. Attachment to shaft
is by four bolts concealed within the head.
SL3 Model
50 to 70 watt HID
Medium Base Lamps
42 watt Compact Fluorescent
Shaft: One-piece extruded aluminum with internal tracks for attaching
head and base.
Base: One-piece cast, low-copper (<0.6% Cu) aluminum secured to
shaft by four concealed stainless steel bolts.
SL3
Maximum weight: 39 lb
8"
8E"
(203.2.mm)
(225.4 mm)
3B"
(79.4 mm)
5J"
(133.4 mm)
Lens: Clear flat B" thick tempered glass retained by two stainless steel
brackets, and four stainless steel, hex socket cap screws, fully gasketed.
37K"
Ballast: Factory mounted to rigid harness suspended from fixture head
within the shaft. Wire leads supplied to base. HID: High power factor with
starting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes.
13W Fluorescent: 120V 32°F. starting; 277V 0°F. starting.
26W, 32W, 42W Fluorescent: High power factor with starting
temperature of 0°F. LED: A total of 9 LED emitters configured in a
rectangular array comprised together as a module. Two (2) modules
for 30 watt version; and four (4) modules for 60 watt version.
Available in “Halogen White” (approx. 3500K). Emitters are directly
attached to the electronic driver.
LED Driver: Constant current electronic driver. Rated for
30 watt, or 60 watt. Available in 120 volt or 277 volt input.
0°F. starting temperature. All drivers are Underwriters Laboratories
recognized. 120V versions are dimmable.
(952.5 mm)
LIGHT
CENTER
HEIGHT
42L"*
Reflector and Socket: Formed specular Alzak® reflector panels secured
to a harness which holds a porcelain medium base 4KV socket
(HID and Incandescent), GX24q-4 - Universal Socket (42W Fluorescent),
or two single-ended twin tube sockets (13W Fluorescent).
(1085.9 mm)
*36L" OVERALL HEIGHT
AVAILABLE - CONTACT
KIM REPRESENTATIVE
8"
(203.2.mm)
Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks complete with
leveling nuts, washers, couplings, rigid pressed board template and
black stainless steel bolts.
9D"
(244.5 mm)
Finish/Color: Finish is Super TGIC thermoset polyester powder coat
paint, 2.5 mil nominal thickness, applied over a titanated zirconium
conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.
Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,
Platinum Silver, or White. Custom colors are available.
8K" (215.9 mm)
BOLT CIRCLE DIA.
BASE PLAN
SL3
CAUTION: Fixtures must be grounded in accordance with national, state
and/or local electrical codes. Failure to do so may result in serious
personal injury.
Listings and Ratings
ULcUL 1598
IP46 Rated
CE
IESNA Rated - Full Cut Off
IDA Rated - Full Shielded
52
KIM LIGHTING
25C Ambient
SL3
Site Lightforms
Ordering Information
Ordering Example:
Fixture
Electrical Module
Luminaire
Finish
SL3 / 50PMH277 / WH
1
2
3
1 Fixture:
Cat. No. designates SL fixture.
Cat. No.:
2 Electrical Module:
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
SL3
50PMH120
50PMH277
70PMH120
70PMH277
50HPS120
50HPS277
70HPS120
70HPS277
60INC120
13PL1201
13PL2771
42PL1202
42PL2082
42PL2402
42PL2772
30LED120
30LED277
INC = Incandescent
PL = Compact Fluorescent
60LED120
60LED277
LED = Light Emitting Diode
See lamp and electrical data on
page 69 for ballast types and
characteristics.
Lamp Lamp Line
Watts Type Volts
50
PMH 277
Coated lamps recommended.
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated zirconium
conversion coating.
4 Optional Emergency
Battery Back-up:
Two lamps re uired per fixture.
42PL operates one 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).
1
2
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.
Color:
Black
Cat. No.: BL
Cat. No.: EM
Dark Bronze
DB
Light Gray
LG
Stealth Gray™
SG
Platinum Silver
PS
White
WH
Custom Colors
CC
Consult
representative
for custom colors.
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
For Compact Fluorescent only.
5 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up to 90 minutes of supplemental
light. See table at right for max. lumens output by lamps.
Lamp (4-Pin)
42W
32W
26W
1 lamp lumens
750
575
450
KIM LIGHTING
53
SL4
Site Lightforms®
Specifications
Head: One-piece cast, low-copper (<0.6% Cu) aluminum, F" wall
thickness with external reveals to unify head and shaft. Attachment to
shaft is by four bolts concealed within the head.
SL4 Model
50 to 70 watt HID
Medium Base Lamps
42 watt Compact Fluorescent
Shaft: One-piece extruded aluminum with internal tracks for attaching
head and base.
Base: One-piece cast, low-copper (<0.6% Cu) aluminum secured to
shaft by four concealed stainless steel bolts.
SL4
Maximum weight: 47 lb
8"
21"
(203.2 mm)
(533.4 mm)
Reflector and Socket: (Typical of two) Formed specular Alzak® reflector
panels secured to a harness which holds a porcelain medium
base 4KV socket (HID and Incandescent), GX24q-4 - Universal Socket
(42W Fluorescent), or two single-ended twin tube sockets
(13W Fluorescent).
5J"
(133.4 mm)
Lens: Clear flat B" thick tempered glass retained by two stainless steel
brackets, and four stainless steel, hex socket cap screws, fully gasketed.
37K"
(952.5 mm)
LIGHT
CENTER
HEIGHT
42L"*
(1085.9 mm)
3B"
(79.4 mm)
*36L" OVERALL HEIGHT
AVAILABLE - CONTACT
KIM REPRESENTATIVE
8"
(203.2 mm)
9D"
Ballast: Factory mounted to rigid harness suspended from fixture head
within the shaft. Wire leads supplied to base. HID: High power factor with
starting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes.
13W Fluorescent: 120V 32°F. starting; 277V 0°F. starting.
26W, 32W, 42W Fluorescent: High power factor with starting
temperature of 0°F. LED: A total of 9 LED emitters configured in a
rectangular array comprised together as a module. Two (2) modules
for 30 watt version; and four (4) modules for 60 watt version.
Available in “Halogen White” (approx. 3500K). Emitters are directly
attached to the electronic driver.
LED Driver: Constant current electronic driver. Rated for
30 watt, or 60 watt. Available in 120 volt or 277 volt input.
0°F. starting temperature. All drivers are Underwriters Laboratories
recognized. 120V versions are dimmable.
Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks complete with
leveling nuts, washers, couplings, rigid pressed board template and
black stainless steel bolts.
(244.5 mm)
8K" (215.9 mm)
Finish/Color: Finish is Super TGIC thermoset polyester powder coat
paint, 2.5 mil nominal thickness, applied over a titanated zirconium
conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.
Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,
Platinum Silver, or White. Custom colors are available.
BOLT CIRCLE DIA.
BASE PLAN
SL4
CAUTION: Fixtures must be grounded in accordance with national, state
and/or local electrical codes. Failure to do so may result in serious
personal injury.
Listings and Ratings
ULcUL 1598
IP46 Rated
CE
IESNA Rated - Full Cut Off
IDA Rated - Full Shielded
54
KIM LIGHTING
25C Ambient
SL4
Site Lightforms
Ordering Information
Ordering Example:
Fixture
Electrical Module
Luminaire
Finish
SL4 / 50PMH277 / WH
1
2
3
1 Fixture:
Cat. No. designates SL fixture.
Cat. No.:
2 Electrical Module:
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
SL4
50PMH1201
50PMH2771
70PMH1201
70PMH2771
50HPS1201
50HPS2771
70HPS1201
70PHS2771
60INC1201
13PL1202
13PL2772
42PL1201,3
42PL2081,3
42PL2401,3
42PL2771,3
60LED120
60LED277
INC = Incandescent
PL = Compact Fluorescent
120LED120
120LED277
LED = Light Emitting Diode
See lamp and electrical data on
page 69 for ballast types and
characteristics.
Lamp Lamp Line
Watts Type Volts
50
PMH 277
Coated lamps recommended.
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated zirconium
conversion coating.
4 Optional Emergency
Battery Back-up:
Two lamps re uired per fixture.
Four lamps re uired per fixture.
3
42PL operates 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).
1
2
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.
Color:
Black
Cat. No.: BL
Cat. No.: EM
Dark Bronze
DB
Light Gray
LG
Stealth Gray™
SG
Platinum Silver
PS
White
WH
Custom Colors
CC
Consult
representative
for custom colors.
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
For Compact Fluorescent only.
5 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up to 90 minutes of supplemental
light. See table at right for max. lumens output by lamps.
Lamp (4-Pin)
42W
32W
26W
1 lamp lumens
750
575
450
KIM LIGHTING
55
SL5
Site Lightforms®
Specifications
Head: One-piece cast, low-copper (<0.6% Cu) aluminum, F" wall
thickness, attached to shaft by four bolts concealed within the head, fully
gasketed.
SL5 Model
50 to 70 watt HID
Medium Base Lamps
42 watt Compact Fluorescent
Shaft: One-piece extruded aluminum with internal tracks for base
attachment. Cast aluminum top cap internally secured and fully gasketed.
Base: One-piece cast, low-copper (<0.6% Cu) aluminum secured to
shaft by four concealed stainless steel bolts.
SL5
Maximum weight: 37 lb
8"
4J"
4J"
(108.0 mm)
(108.0 mm)
Reflector and Socket: Formed specular Alzak® reflector panel secured
to a harness which holds a porcelain medium base 4KV socket
(HID and Incandescent), GX24q-4 - Universal Socket (42W Fluorescent),
or GX23-2 socket (13W Fluorescent).
(203.2 mm)
Lens: Clear flat F" thick polycarbonate retained by three captive
pressure-limiting allen head shoulder screws, fully gasketed.
9"
(228.6 mm)
33"
42"*
(838.2 mm)
LIGHT
CENTER
HEIGHT
(1066.8 mm)
*36" OVERALL HEIGHT
AVAILABLE - CONTACT
KIM REPRESENTATIVE
8"
(203.2 mm)
Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks complete with
leveling nuts, washers, couplings, rigid pressed board template and
black stainless steel bolts.
9D"
(244.5 mm)
Finish/Color: Finish is Super TGIC thermoset polyester powder coat
paint, 2.5 mil nominal thickness, applied over a titanated zirconium
conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.
Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,
Platinum Silver, or White. Custom colors are available.
8K" (215.9 mm)
BOLT CIRCLE DIA.
BASE PLAN
SL5
CAUTION: Fixtures must be grounded in accordance with national, state
and/or local electrical codes. Failure to do so may result in serious
personal injury.
Listings and Ratings
ULcUL 1598
IP46 Rated
CE
IESNA Rated - Semi Cut Off
56
KIM LIGHTING
Ballast: Factory mounted to rigid harness suspended from fixture head
within the shaft. Wire leads supplied to base. HID: High power factor with
starting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes.
13W Fluorescent: 120V 32°F. starting; 277V 0°F. starting.
26W, 32W, 42W Fluorescent: High power factor with starting
temperature of 0°F. LED: A total of 9 LED emitters configured in a
rectangular array comprised together as a module. Two (2) modules
for 30 watt version; and four (4) modules for 60 watt version.
Available in “Halogen White” (approx. 3500K). Emitters are directly
attached to the electronic driver.
LED Driver: Constant current electronic driver. Rated for
30 watt, or 60 watt. Available in 120 volt or 277 volt input.
0°F. starting temperature. All drivers are Underwriters Laboratories
recognized. 120V versions are dimmable.
25C Ambient
SL5
Site Lightforms
Ordering Information
Ordering Example:
Fixture
Electrical Module
Luminaire
Finish
SL5 / 50PMH277 / WH
1
2
3
1 Fixture:
Cat. No. designates SL fixture.
Cat. No.:
2 Electrical Module:
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
SL5
50PMH120
50PMH277
70PMH120
70PMH277
50HPS120
50HPS277
70HPS120
70HPS277
100INC120
13PL120
13PL277
42PL1201
42PL2081
42PL2401
42PL2771
15LED120
15LED277
INC = Incandescent
PL = Compact Fluorescent
30LED120
30LED277
LED = Light Emitting Diode
See lamp and electrical data on
page 69 for ballast types and
characteristics.
Lamp Lamp Line
Watts Type Volts
50
PMH 277
Coated lamps recommended.
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated zirconium
conversion coating.
4 Optional Emergency
Battery Back-up:
42PL operates 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).
1
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.
Color:
Black
Cat. No.: BL
Cat. No.: EM
Dark Bronze
DB
Light Gray
LG
Stealth Gray™
SG
Platinum Silver
PS
White
WH
Custom Colors
CC
Consult
representative
for custom colors.
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
For Compact Fluorescent only.
5 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up to 90 minutes of supplemental
light. See table at right for max. lumens output by lamps.
Lamp (4-Pin)
42W
32W
26W
1 lamp lumens
750
575
450
KIM LIGHTING
57
SL6
Site Lightforms®
Specifications
SL6 Model
50 to 70 watt HID
Medium Base Lamps
42 watt Compact Fluorescent
SL6
Maximum weight: 39 lb
3B"
(79.4 mm)
8"
(203.2 mm)
4L"
4L"
(120.7 mm)
(120.7 mm)
9"
(228.6 mm)
33"
42"*
(838.2 mm)
LIGHT
CENTER
HEIGHT
(1066.8 mm)
*36" OVERALL HEIGHT
AVAILABLE - CONTACT
KIM REPRESENTATIVE
8"
(203.2 mm)
Anchor Bolts: Four C" x 10" + 2" zinc plated L-hooks complete with
leveling nuts, washers, couplings, rigid pressed board template and
black stainless steel bolts.
Finish/Color: Finish is Super TGIC thermoset polyester powder coat
paint, 2.5 mil nominal thickness, applied over a titanated zirconium
conversion coating; A.S.T.M. 2500 hour salt spray test endurance rating.
Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™,
Platinum Silver, or White. Custom colors are available.
9D"
(244.5 mm)
8K" (215.9 mm)
BOLT CIRCLE DIA.
BASE PLAN
SL6
CAUTION: Fixtures must be grounded in accordance with national, state
and/or local electrical codes. Failure to do so may result in serious
personal injury.
Listings and Ratings
ULcUL 1598
IP46 Rated
CE
IESNA Rated - Semi Cut Off
58
KIM LIGHTING
Head: (Typical of two) One-piece cast, low-copper (<0.6% Cu)
aluminum, F" wall thickness attached to shaft by four bolts concealed
within each head, fully gasketed.
Shaft: One-piece extruded aluminum with internal tracks for base
attachment. Cast aluminum top cap internally secured and fully gasketed.
Base: One-piece cast, low-copper (<0.6% Cu) aluminum secured to
shaft by four concealed stainless steel bolts.
Reflector and Socket: Formed specular Alzak® reflector panels secured
to a harness which holds a porcelain medium base 4KV socket (HID and
Incandescent), GX24q-4 - Universal Socket (42W Fluorescent), or two
single ended twin tube sockets (13W Fluorescent).
Lens: (Typical of two) Clear flat F" thick polycarbonate retained by three
captive pressure-limiting allen head shoulder screws, fully gasketed.
Ballast: Factory mounted to rigid harness suspended from fixture head
within the shaft. Wire leads supplied to base. HID: High power factor with
starting temperatures of -20°F. for PMH and -40°F. for HPS lamp modes.
13W Fluorescent: 120V 32°F. starting; 277V 0°F. starting.
26W, 32W, 42W Fluorescent: High power factor with starting
temperature of 0°F. LED: A total of 9 LED emitters configured in a
rectangular array comprised together as a module. Two (2) modules
for 30 watt version; and four (4) modules for 60 watt version.
Available in “Halogen White” (approx. 3500K). Emitters are directly
attached to the electronic driver.
LED Driver: Constant current electronic driver. Rated for
30 watt, or 60 watt. Available in 120 volt or 277 volt input.
0°F. starting temperature. All drivers are Underwriters Laboratories
recognized. 120V versions are dimmable.
25C Ambient
SL6
Site Lightforms
Ordering Information
Ordering Example:
Fixture
Electrical Module
Luminaire
Finish
SL6 / 50PMH277 / WH
1
2
3
1 Fixture:
Cat. No. designates SL fixture.
Cat. No.:
2 Electrical Module:
PMH = Pulse Start Metal Halide
HPS = High Pressure Sodium
SL6
50PMH120
50PMH277
70PMH120
70PMH277
50HPS120
50HPS277
70HPS120
70HPS277
100INC120
13PL1201
13PL2771
42PL1202
42PL2082
42PL2402
42PL2772
30LED120
30LED277
INC = Incandescent
PL = Compact Fluorescent
60LED120
60LED277
LED = Light Emitting Diode
See lamp and electrical data on
page 69 for ballast types and
characteristics.
Lamp Lamp Line
Watts Type Volts
50
PMH 277
Coated lamps recommended.
3 Luminaire Finish:
Super TGIC powder coat
paint over titanated zirconium
conversion coating.
4 Optional Emergency
Battery Back-up:
Two lamps re uired per fixture.
42PL operates one 26, 32, or 42 watt lamp at 120 thru 277 volts (50-60 Hz).
1
2
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.
Color:
Black
Cat. No.: BL
Cat. No.: EM
Dark Bronze
DB
Light Gray
LG
Stealth Gray™
SG
Platinum Silver
PS
White
WH
Custom Colors
CC
Consult
representative
for custom colors.
Internal battery pack provides 90 minutes of supplemental light at 23% lamp lumens for
26, 32 or 42 watt compact fluorescent lamps.
For Compact Fluorescent only.
5 Optional Cold-Pack
Emergency Battery Pack:
Cat. No.: EM-CP The EM-CP option is a temperature controlled ballast designed to maintain operation
without interruption within a range of hi/low ambient temperatures, -20°C to +55°C.
Internal Cold-Pack emergency battery pack provides up to 90 minutes of supplemental
light. See table at right for max. lumens output by lamps.
Lamp (4-Pin)
42W
32W
26W
1 lamp lumens
750
575
450
KIM LIGHTING
59
CB
Compact Bollards
Photometrics
Typical Quadrant
CB32 Luminaire
Wattage
A 100W. INC.
B 13W. PL
C 42W. PL
D 50W. PMH
E 70W. PMH
F 50W. HPS
G 70W. HPS
Lamp
Initial Lumens
A21 I.F. Medium Base
GX23 Base
G24D-3 Base
ED-17 Medium Base, Coated
ED-17 Medium Base, Coated
ED-17 Medium Base, Coated
E-17 Medium Base, Coated
1690
900
3200
2688
5400
3800
5985
Initial Horizontal
Footcandles for
32" Bollard
(28.4" Light Center)
A
B
C
D
0.12 0.06 0.19 0.24
E
0.39
F
0.27
G
0.43
0.31 0.16 0.51 0.62
0.98
0.69
1.09
6'
1.31 0.66 1.92 2.63
4.18
2.94
4.63
4'
2'
4'
6'
7.75 3.94 9.79 15.60 24.78 17.44 27.46
A 100W. INC.
B 13W. PL
C 42W. PL
D 50W. PMH
E 50W. HPS
Lamp
Initial Lumens
A21 I.F. Medium Base
GX23 Base
G24D-3 Base
ED-17 Medium Base, Coated
ED-17 Medium Base, Coated
1690
900
3200
2688
3800
KIM LIGHTING
Initial Horizontal
Footcandles for
24" Bollard
(20.4" Light Center)
A
B
C
D
0.04 0.02 0.07 0.09
E
0.10
0.12 0.06 0.17 0.25
0.28
6'
0.49 0.25 0.77 0.98
1.10
4'
5.23 2.66 7.59 10.53 11.77
60
2'
Typical Quadrant
CB24 Luminaire
Wattage
8'
2'
4'
6'
8'
2'
Photometrics
NOTE: All photometric tests were
conducted using white fixtures with
coated lamps. Clear High Pressure
Sodium lamps may be used if slight
louver shadows are acceptable.
Lamp
A 70W. HPS
B 100W. HPS
C 70W. PMH
D 100W. PMH
E 100W. INC.
F 42W. PL
Initial Lumens
E-17 Medium Base, Coated
E-17 Medium Base, Coated
ED-17 Medium Base, Coated
ED-17 Medium Base, Coated
A21 I.F. Medium Base
G24D-3 Base
Vandal Resistant Round Bollards
Typical Half
VRB1 and VRB3 Single Function Luminaire
Wattage
VRB
5985
8800
5400
8000
1690
3200
Initial Horizontal
Footcandles for
42" Bollard
(36" Light Center)
21'
18'
15'
12'
Black and Dark Bronze colors will produce less louver brightness and illumination levels
than Light Gray or White.
9'
TYPICAL
TYPICALCANDLEPOWER
CANDLEPOWERDISTRIBUTION
DISTRIBUTIONCURVE
CURVEFOR
FOR100
100WATT
WATTPMH
MH
120°
130° 140° 150°
170° 170° 150° 140° 130°
160°
160°
120°
A B C D E
6'
F
3'
110°
110°
100°
100°
90°
90°
80°
80°
0'
200
70
70°
400
60°
600
800
50°
40°
2.1 3.2 2.4 3.5 .47 1.13
3'
3.8 6.8 4.5 6.6 1.2 2.13
6'
1.4 2.2 1.6 2.3 .37 .76
9'
70
70°
.51 .81 .61 .90 .12 .29
12'
60°
.23 .39 .27 .40 .06 .13
15'
.12 .20 .13 .20 .04 .07
18'
.07 .12 .07 .11 .02 .03
21'
50°
30°
20°
10°
0°
10°
20°
30°
0'
40°
Lamp
A 70W. HPS
B 100W. HPS
C 70W. PMH
D 100W. PMH
E 100W. INC.
F 42W. PL
Initial Lumens
E-17 Medium Base, Coated
E-17 Medium Base, Coated
ED-17 Medium Base, Coated
ED-17 Medium Base, Coated
A21 I.F. Medium Base
G24D-3 Base
6'
9'
Typical Half
VRB2 and VRB4 Dual Function Luminaire
Wattage
3'
5985
8800
5400
8000
1690
3200
12'
15'
18'
21'
Non-Cutoff Side
Initial Horizontal
Footcandles for
42K" Bollard
(37K" Light Center)
21'
18'
15'
Non-Cutoff Side
(Vertical Louvers)
Black and Dark Bronze colors will produce less louver brightness and illumination levels
than Light Gray or White.
12'
Cutoff Side
(Horizontal Louvers)
9'
TYPICAL
TYPICALCANDLEPOWER
CANDLEPOWERDISTRIBUTION
DISTRIBUTIONCURVE
CURVEFOR
FOR100
100WATT
WATTPMH
MH
120°
130° 140° 150°
170° 170° 150° 140° 130°
160°
160°
120°
A B C D E
6'
F
3'
110°
110°
100°
100°
90°
90°
0'
80°
70
70°
400
Cutoff Side
60°
60°
6'
1.4 2.2 1.6 2.3 .37 .76
9'
.51 .81 .61 .90 .12 .29
12'
.23 .39 .27 .40 .06 .13
15'
18'
.12 .20 .13 .20 .04 .07
800
40°
3.8 6.8 4.5 6.6 1.2 2.13
Non-Cutoff Side
600
50°
3'
80°
200
70
70°
2.1 3.2 2.4 3.5 .47 1.13
50°
30°
20°
10°
0°
10°
20°
30°
40°
Cutoff Side
.07 .12 .07 .11 .02 .03
21'
0'
3'
6'
9'
12'
15'
18'
21'
KIM LIGHTING
61
VSB
Vandal Resistant Square Bollards
Lamp
A 70W. HPS
B 100W. HPS
C 70W. PMH
D 100W. PMH
E 100W. INC.
F 42W. PL
Photometrics
Typical Half
VSB1 Single Function Luminaire
Wattage
NOTE: All photometric tests were
conducted using white fixtures with
coated lamps. Coated lamps must
be used to minimize shadows from
the luminaire structural supports.
Initial Lumens
E-17 Medium Base, Coated
E-17 Medium Base, Coated
ED-17 Medium Base, Coated
ED-17 Medium Base, Coated
A21 I.F. Medium Base
Gx24q-3 Base
5860
8800
5300
8500
1710
3200
Initial Horizontal
Footcandles for
43" Bollard
(38" Light Center)
21'
18'
15'
12'
Black and Dark Bronze colors will produce less louver brightness and illumination levels
than Light Gray or White.
9'
TYPICAL
TYPICALCANDLEPOWER
CANDLEPOWERDISTRIBUTION
DISTRIBUTIONCURVE
CURVEFOR
FOR100
100WATT
WATTPMH
MH
120°
130° 140° 150°
170° 170° 150° 140° 130°
160°
160°
120°
A B C D E
6'
F
3'
110°
110°
100°
100°
90°
90°
80°
80°
0'
200
70°
70
400
60°
600
800
50°
40°
5.6 8.4 5.1 8.2 1.6 3.6
3'
5.2 7.8 4.7 7.6 1.5 3.7
6'
1.7 2.5 1.6 2.5 .50 1.3
9'
70
70°
.62 .93 .56 .90 .18 .53
12'
60°
.27 .41 .25 .40 .08 .27
15'
.13 .20 .12 .20 .04 .13
18'
.06 .10 .06 .10 .02 .01
21'
50°
30°
20°
10°
0°
10°
20°
30°
0'
40°
Lamp
A 70W. HPS
B 100W. HPS
C 70W. PMH
D 100W. PMH
E 100W. INC.
F 42W. PL
6'
9'
12'
Typical Half
VSB2 Dual Function Luminaire
Wattage
3'
Initial Lumens
E-17 Medium Base, Coated
E-17 Medium Base, Coated
ED-17 Medium Base, Coated
ED-17 Medium Base, Coated
A21 I.F. Medium Base
G24D-3 Base
5860
8800
5300
8500
1710
3200
15'
18'
21'
Non-Cutoff Side
Initial Horizontal
Footcandles for
43" Bollard
(38" Light Center)
21'
18'
15'
Non-Cutoff Side
(Vertical Louvers)
Black and Dark Bronze colors will produce less louver brightness and illumination levels
than Light Gray or White.
12'
Cutoff Side
(Horizontal Louvers)
9'
TYPICAL
TYPICALCANDLEPOWER
CANDLEPOWERDISTRIBUTION
DISTRIBUTIONCURVE
CURVEFOR
FOR100
100WATT
WATTPMH
MH
120°
130° 140° 150°
170° 170° 150° 140° 130°
160°
160°
120°
A B C D E
6'
F
3'
110°
110°
100°
100°
90°
90°
0'
80°
70
70°
400
Cutoff Side
60°
5.2 7.8 4.7 7.6 1.5 3.7
6'
1.7 2.5 1.6 2.5 .50 1.3
9'
.62 .93 .56 .90 .18 .53
12'
.27 .41 .25 .40 .08 .27
15'
Non-Cutoff Side
60°
600
18'
.13 .20 .12 .20 .04 .13
800
50°
3'
80°
200
70
70°
5.6 8.4 5.1 8.2 1.6 3.6
Cutoff Side
50°
21'
.06 .10 .06 .10 .02 .01
40°
62
30°
KIM LIGHTING
20°
10°
0°
10°
20°
30°
40°
0'
3'
6'
9'
12'
15'
18'
21'
GEM™
HID
Photometrics
Typical Half
GEM1 Luminaire
Wattage
Lamp
A 70W. HPS
B 100W. HPS
C 70W. PMH
D 100W. PMH
Initial Lumens
E-17 Medium Base, Clear
E-17 Medium Base, Clear
ED-17 Medium Base, Clear
ED-17 Medium Base, Clear
6300
9500
6200
9000
Initial Horizontal
Footcandles for
42K" Bollard
(37K" Light Center)
21'
18'
15'
12'
9'
TYPICALCANDLEPOWER
CANDLEPOWERDISTRIBUTION
DISTRIBUTIONCURVE
CURVEFOR
FOR100
100WATT
WATTPMH
MH
TYPICAL
120°
130° 140° 150°
170° 170° 150° 140° 130°
160°
160°
120°
A
B
C
6'
D
3'
110°
110°
100°
100°
90°
90°
80°
80°
0'
300
70°
600
60°
900
1200
50°
40°
15.7 23.6 13.4 24.9
3'
6.4 9.6 5.4 10.1
6'
1.9 2.9 1.7 3.1
9'
70°
0.6 0.9 0.5 1.0
12'
60°
0.2 0.4 0.2 0.3
15'
0.1 0.2 0.1 0.2
18'
50°
30°
20°
10°
0°
10°
20°
30°
0'
40°
Lamp
A 70W. HPS
B 100W. HPS
C 70W. PMH
D 100W. PMH
Initial Lumens
E-17 Medium Base, Clear
E-17 Medium Base, Clear
ED-17 Medium Base, Clear
ED-17 Medium Base, Clear
3'
6'
9'
12'
15'
18'
21'
Typical Half
GEM1 Luminaire with Houseside Shield
Wattage
21'
6300
9500
6200
9000
Initial Horizontal
Footcandles for
42K" Bollard
(37K" Light Center)
21'
18'
15'
12'
9'
TYPICALCANDLEPOWER
CANDLEPOWERDISTRIBUTION
DISTRIBUTIONCURVE
CURVEFOR
FOR100
100WATT
WATTPMH
MH
TYPICAL
120°
130° 140° 150°
170° 170° 150° 140° 130°
160°
160°
120°
A
B
C
D
6'
110°
110°
3'
100°
100°
0'
90°
90°
3'
80°
80°
300
70°
900
60°
1200
50°
50°
40°
30°
20°
PATH SIDE
6'
2.1 3.1 1.8 3.2
9'
0.7 1.0 0.6 1.0
12'
0.3 0.4 0.2 0.4
15'
0.1 0.2 0.1 0.2
18'
70°
600
60°
6.7 10.2 5.8 10.7
10°
0°
10°
20°
30°
HOUSE SIDE
21'
40°
0'
3'
6'
9'
12'
15'
18'
21'
KIM LIGHTING
63
GEM™
GEM Performance Bollard
Photometrics
GEM1 Luminaire
GEM1 Luminaire with Houseside Shield
Wattage
Lamp
32W. PL
GX24q-3 Base
Initial Lumens
Wattage
Lamp
2400
32W. PL
GX24q-3 Base
Initial Lumens
2400
Typical Half
Typical Half
21'
Initial Horizontal
18'
Footcandles for
15'
42K" Bollard
12'
(37K" Light Center)
9'
6'
3'
0'
4.3
3'
6'
1.4
9'
0.4
12'
0.2
15'
0.1
18'
21'
21' 18' 15' 12' 9' 6' 3' 0'
21'
Initial Horizontal
18'
Footcandles for
15'
42K" Bollard
12'
(37K" Light Center)
9'
6'
3'
0'
3'
6'
1.4
9'
0.4
12'
0.2
15'
0.1
18'
21'
21' 18' 15' 12' 9' 6' 3' 0'
50
50
50°
150°
120
20° 150
120°
120° 150°
90
90°
90°
50
10050
60° 150
60
100
60°
150
200
0°
30°
30
200
30°
TYPICAL
CANDLEPOWER
DISTRIBUTION
CURVE FOR
32 WATT PL
150
50° 120
150°
20°
120°
150° 120°
90°
90
90°
60
60°
60°
120
20° 150
120°
150°
50°
120° 150°
100
100
90°
90
90°
90°
90
90°
50
50
100
100
60 150
60°
60°200
150
200
0°
30°
30
0°
30°
150
150
200
200
30
30°
30°
150°
150
50° 120
120°
20°
150° 120°
TYPICAL
CANDLEPOWER
DISTRIBUTION
CURVE FOR
32 WATT PL
60
60°
60°
30°
30
30°
GEM1 Luminaire with LED Module
Typical Half
for 30 Watt LED
21'
18'
Initial Horizontal
Footcandles for
42K" Bollard
(37K" Light Center)
15'
12'
9'
Typical Half
for 45 Watt LED
21'
18'
Initial Horizontal
Footcandles for
42K" Bollard
(37K" Light Center)
15'
12'
9'
18'
12'
9'
6'
6'
3'
3'
3'
0'
0'
1.0
2.0
1.0
0.5
0.2
.0.1
6'
9'
12'
2.0
5.0
2.0
1.0
0.5
0.2
0.1
3'
6'
9'
12'
15'
15'
18'
18'
21'
21' 18' 15' 12' 9'
21'
21' 18' 15' 12' 9'
6'
CANDLEPOWER
DISTRIBUTION
90°
90
CURVE FOR
30 WATT LED
90°
90
43
86
60 129
60°
64
0'
150°
150
50° 120°
120
20° TYPICAL
150
50°
120
120°
20° 150°
30°
30
3'
60°
60
0°
30°
30
KIM LIGHTING
Initial Horizontal
Footcandles for
42K" Bollard
(37K" Light Center)
15'
6'
3'
Typical Half
for 60 Watt LED
21'
0'
2.0
3'
5.0
2.0
1.0
0.5
0.2
0.1
6'
9'
12'
15'
18'
6'
0'
150
150°
50° 120
20° TYPICAL
120°
50°
150°
120
20° 150
120°
CANDLEPOWER
DISTRIBUTION
90 CURVE FOR
90°
45 WATT LED
90
90°
82
164
60 246
60°
30
30°
3'
60
60°
0°
30
30°
21'
21' 18' 15' 12' 9'
50°
150°
120
20° 150
120°
6'
0'
50° 120
150°
150
120°
20°
90
90°
90
90°
86
172
60 258
60°
30
30°
3'
60
60°
0°
30
30°
TYPICAL
CANDLEPOWER
DISTRIBUTION
CURVE FOR
60 WATT LED
BNB / LE
Bounce® Bollard / Era® Lantern Bollard
Photometrics
BNB & LE Luminaires
BNB & LE Luminaires w/ Houseside Shield
Typical Half
Typical Half
Initial Horizontal
Footcandles for
42K" Bollard
(39F" Light
Center)
21'
18'
15'
12'
9'
21'
House Side
18'
120°
Initial Horizontal
Footcandles for
42K" Bollard
(39F" Light
Center)
15'
12'
9'
6'
6'
3'
3'
A B
C
D
E
21.3 34.2 23.6 35.4 12.0
0'
150°
120°
90°
90°
200
400
60° 600
800
30°
0°
60°
30°
A B
C
D
E
17.1 27.4 18.9 28.4 8.14
0'
3'
3'
6'
3.82 6.13 4.23 6.34 2.88
6'
9'
0.80 1.29 0.89 1.34 0.70
9'
3.45 5.53 3.81 5.73 2.92
0.62 0.99 0.68 1.02 0.68
12'
0.21 0.34 0.24 0.35 0.20
12'
0.13 0.21 0.15 0.22 0.17
15'
0.08 0.12 0.09 0.13 0.07
15'
0.03 0.06 0.04 0.06 0.03
18'
0.04 0.06 0.05 0.07 0.05
0.02 0.03 0.02 0.03 0.02
0.02 0.03 0.02 0.03 0.02
21'
21' 18' 15' 12' 9' 6'
18'
21'
21' 18' 15' 12' 9'
A
B
C
D
E
150°
3' 0'
6'
A
B
C
D
E
70W PMH, ED-17 Med. Base, Coated, 5300 initial lumens
100W PMH, ED-17 Med. Base, Coated, 8500 initial lumens
70W HPS, ED-17 Med. Base, Coated, 5860 initial lumens
100W HPS, ED-17 Med. Base, Coated, 8800 initial lumens
42W PL-T, GX24q-4 Base, 3200 initial lumens
120°
150°
TYPICAL
CANDLEPOWER
DISTRIBUTION
90°
CURVE FOR
100 WATT PMH
90°
320
640
60° 960
1280
30°
0.01 0.01 0.01 0.01 0.01
3' 0'
70W PMH, ED-17 Med. Base, Coated, 5300 initial lumens
100W PMH, ED-17 Med. Base, Coated, 8500 initial lumens
70W HPS, ED-17 Med. Base, Coated, 5860 initial lumens
100W HPS, ED-17 Med. Base, Coated, 8800 initial lumens
42W PL-T, GX24q-4 Base, 3200 initial lumens
150°
150°
120° TYPICAL
CANDLEPOWER
DISTRIBUTION
90°
CURVE FOR
100 WATT PMH
90°
60°
30°
0°
Path Side
120°
120°
150°
60°
200
400
60° 600
8009'
30°
0°
30°
PATH SIDE
HOUSE SIDE
60°
0'
BNB & LE Luminaires with LED Module
3'
60°
Typical Half
for 30 Watt LED
21'
18'
Initial Horizontal
Footcandles for
42K" Bollard
(39F" Light
Center)
15'
12'
9'
6'
3'
9'
Typical Half
for 45 Watt LED
21'
18'
Initial Horizontal
Footcandles for
42K" Bollard
(39F" Light
Center)
15'
12'
9'
6'
1.00
2.00
2.00
1.00
00.5
00.2
00.1
0.05
0.02
0.01
18'
Initial Horizontal
Footcandles for
42K" Bollard
(39F" Light
Center)
15'
12'
9'
6'
3'
3'
0'
Typical Half
for 60 Watt LED
21'
0'
0'
15'
15'
5.00
5.00
2.00
1.00
0.50
0.20
0.10
0.05
18'
18'
0.02
18'
21'
21' 18' 15' 12' 9'
21'
21' 18' 15' 12' 9'
0.01
21'
21' 18' 15' 12' 9' 6'
3'
6'
9'
12'
120°
150°
6'
CANDLEPOWER
DISTRIBUTION
90°
CURVE FOR
30 WATT LED
25
50
60° 75
100
30°
0
120° TYPICAL
150°
90°
PATH SIDE
3'
IES Type1
60°
0°
30°
HOUSE SIDE
3'
6'
9'
12'
120°
150°
6'
CANDLEPOWER
DISTRIBUTION
90°
CURVE FOR
45 WATT LED
50
100
150
60°
200
30°
0'
120° TYPICAL
150°
90°
PATH SIDE
3'
IES Type 3
60°
0°
30°
HOUSE SIDE
6'
10.0
5.00
2.00
1.00
0.50
0.20
0.10
0.05
3'
9'
12'
15'
150°
120°
120°
100
200
60° 300
400
30°
3' 0' 0.02
TYPICAL
CANDLEPOWER
DISTRIBUTION
90° CURVE FOR
60 WATT LED
150°
90°
PATH SIDE
IES Type5
60°
0°
30°
HOUSE SIDE
KIM LIGHTING
65
B30
High Performance Bollard
Photometrics
NOTE: The multiplication factor for correction of footcandles and
candlepower with optional clear Polycarbonate Enclosure: 0.92
B30 Luminaire
Wattage
Lamp
A 42W. PL
B 70W. HPS
C 100W. HPS
D 70W. PMH
E 100W. PMH
Initial Lumens
GX24q-3 Base
E-23K Mogul Base, Coated
E-23K Mogul Base, Coated
ED-17 Medium Base, Coated
ED-17 Medium Base, Coated
2400
5985
8800
5000
8000
E
0'
4.2 12 17 8.5 14
3'
1.4 4.7 6.5 2.8 4.5
6'
.54 1.7 2.3 1.1 1.8
9'
.26 .71 .95 .55 .88
12'
.14 .38 .50 .29 .47
15'
.08 .20 .32 .17 .27
18'
- .11 .16 .10 .16
21'
A
0'
3'
6'
B
C
D
- .07 .10 .06 .10
0'
3'
0'
3'
6'
9'
12'
15'
18'
21'
6'
Candela Diagrams
75
75
90°
150
225
300
100
200
300
80°
150
90°
400
70°
10° 20° 30°
40°
50°
32W. Compact Fluorescent
42W.
60°
10° 20° 30°
40°
80°
70°
70°
70W. High Pressure Sodium, Coated
10° 20° 30°
40°
50°
90°
200
10° 20° 30°
40°
300
50°
70W. Metal Halide, Coated
66
KIM LIGHTING
400
300
40
60°
100W. High Pressure Sodium, Coated
100
100
200
90°
80°
60°
50°
100
225 100
200
300 300
400 500
600 700
100 200
300 400
500 600
200
90°
80°
80°
70°
70°
60°
10° 20° 30°
40°
50°
100W. Metal Halide, Coated
60°
300
40
SL
1
NOTE:
Coated lamps recommended.
Photometrics
Typical Half
SL1 / SL3 Luminaires
Wattage
A
50W. HPS
B
70W. HPS
C
50W. PMH
D
70W. PMH
E (2) 13W. PL
F
42W. PL
G
60W. INC.
Site Lightforms®
1
Lamp
Initial Lumens
ED17 Medium Base, Coated
ED17 Medium Base, Coated
ED17 Medium Base, Coated
ED17 Medium Base, Coated
GX23 Base
GX24q-3 Base
T10 I.F. Medium Base
3800
5985
2688
5184
900 each
3200
745
Initial Horizontal
Footcandles for
42" Fixture
(37K" Light Center)
6'
A
B
C
D
E
F
G
3'
0'
19
11
7.5
2.7
1.3
.55
.25
.12
.06
SL1
A (2) 50W. HPS
B (2) 70W. HPS
C (2) 50W. PMH
D (2) 70W. PMH
E (4) 13W. PL
F (2) 42W. PL
G (2) 60W. INC.
15
8.3
4.7
1.8
.93
.41
.18
.08
.04
30
16
9
3.5
1.8
.80
.35
.16
.07
9
5
2.5
.90
.40
.20
10
.05
.02
16
8.8
4.4
1.6
.72
.36
.19
.08
.04
4.5
2.5
1.5
.45
.25
.12
.05
.02
.01
3'
6'
9'
12'
15'
0'
SL3
3'
6'
9'
12'
15'
18'
Typical Quadrant
SL2 / SL4 Luminaires
Wattage
40
20
10
4
2
1
.40
.20
.10
1
Lamp
Initial Lumens
ED17 Medium Base, Coated
ED17 Medium Base, Coated
ED17 Medium Base, Coated
ED17 Medium Base, Coated
GX23 Base
GX24q-3 Base
T10 I.F. Medium Base
3800 each
5985 each
2688 each
5184 each
900 each
3200 each
745 each
Initial Horizontal
Footcandles for
42L" Fixture
(37K" Light Center)
A
B
C
D
E
F
G
50
30
17
8
4
2
1
.45
.20
.12
100
40
25
15
7
3.5
2
.80
.35
.20
31
18
10
5.2
2.6
1.6
.78
.26
.15
.08
60
35
20
10
5
3
1.5
.50
.28
.15
25
10
5
3.5
1.5
.75
.38
.18
.08
.05
43.9
17.9
8.8
6.3
2.7
1.3
.68
.32
.15
.08
15
5
3
1.8
.75
.50
.30
.10
.05
.03
0'
SL2
SL4
3'
6'
9'
12'
15'
0'
3'
6'
9'
12'
15'
18'
KIM LIGHTING
67
SL
1
NOTE:
Coated lamps recommended.
Site Lightforms®
SL5 Luminaire
SL6 Luminaire
Wattage
Initial
Lumens
Lamp1
A 50W. HPS
B 70W. HPS
C 50W. PMH
D 70W. PMH
E 13W. PL
F 42W. PL
G 100W. INC.
ED17 Medium Base, Coated
ED17 Medium Base, Coated
ED17 Medium Base, Coated
ED17 Medium Base, Coated
GX23 Base
GX24q-3 Base
A19 I.F. Medium Base
Wattage
3800
5985
3400
5400
900
3200
1750
A 50W. HPS
B 70W. HPS
C 50W. PMH
D 70W. PMH
E (2) 13W. PL
F 42W. PL
G 100W. INC.
ED17 Medium Base, Coated 3800
ED17 Medium Base, Coated 5985
ED17 Medium Base, Coated 3400
ED17 Medium Base, Coated 5400
GX23 Base
900 each
GX24q-3 Base
3200
A19 I.F. Medium Base
1750
Typical Quadrant
Initial Horizontal Footcandles
for 42" Fixture (33" Light Center)
Initial Horizontal Footcandles
for 42" Fixture (33" Light Center)
B
C
D
E
F
6'
G
A
B
C
D
E
F
Initial
Lumens
Lamp1
Typical Half
A
Photometrics
G
3'
0'
0'
12
7
3.8
1.5
.75
.35
20
11
6
3
1.2
.70
11
6.3
3.8
1.8
.88
.34
18
10
6
2.8
1.4
.54
4
2
.75
.35
.15
.07
14.9
7.4
2.8
1.3
.56
.27
6 10 4.4 7
2 7.4 2
2.5 4 2.2 3.5 .75 2.8 1.2
1.5 2 1.1 1.8 .50 1.9 .70
.65 1 .57 .90 .28 1 .38
6'
9'
15'
.07 .12 .09 .15 .01 .04 .02
3'
6'
9'
12'
15'
Typical Half
for 30 Watt LED
18'
Initial Horizontal
Footcandles for
42" Fixture
(33" Light Center)
15'
12'
9'
18'
12'
9'
6'
3'
10.0
5.0
2.0
1.0
0.5
0.2
0.1
3'
6'
9'
12'
0'
6'
9'
12'
15'
18'
18'
150
50°
120°
120
20° 150°
90°
90
60°
60
68
6'
3'
0'
150
150°
50° 120°
120
20° TYPICAL
CANDLEPOWER
DISTRIBUTION
90°
90 CURVE FOR
30 WATT LED
100
200
60°
60
300
0°
30°
30
30°
30
KIM LIGHTING
220.0
110.0
5.0
22.0
11.0
00.5
00.2
0.1
3'
15'
21'
21' 18' 15' 12' 9'
Initial Horizontal
Footcandles for
42" Fixture
(33" Light Center)
15'
3'
0'
Typical Half
for 60 Watt LED
21'
6'
21'
21' 18' 15' 12' 9'
150
50°
120°
120
20° 150°
90°
90
60°
60
6'
3'
0'
150
150°
50° 120°
120
20° TYPICAL
CANDLEPOWER
DISTRIBUTION
90°
90 CURVE FOR
240
480
60 WATT LED
60°
60
720
0°
30°
30
9'
12'
15'
0'
18'
SL5 Luminaire with LED Module
21'
6'
.30 .42 .25 .40 .14 .59 .15
.15 .20 .12 .19 .08 .29 .07
.07 .10 .06 .09 .04 .15 .03
12'
.15 .25 .19 .30 .03 .11 .07
.03 .05 .03 .05 .01 .04 .01 0'
3'
3'
7
3.5
1.8
.70
.38
.18
30
30°
3'
6'
9'
12'
15'
18'
ED-17 Coated
Medium Base
70
M98
15000
5800
ED-17 Clear
Medium Base
70
M98
15000
6000
ED-17 Coated
Medium Base
100
M90
15000
8700
ED-17 Clear
Medium Base
100
M90
15000
9000
50
S68
24000
3800
ED-17 Coated
Medium Base
70
S62
24000
5860
ED-17 Clear
Medium Base
70
S62
24000
6300
ED-17 Coated
Medium Base
100
S54
24000
8800
ED-17 Clear
Medium Base
100
S54
24000
9500
13
–
10000
860
32
–
10000
2400
42
–
10000
3200
LED – 75CRI, 3500K
30LED LED
30
–
50000+
1200
45LED
LED
45
–
50000+
1800
60LED
LED
60
–
50000+
2400
70PMH
70PMH
100PMH
100PMH
HIGH PRESSURE SODIUM
50HPS
ED-17 Coated
Medium Base
70HPS
70HPS
100HPS
100HPS
COMPACT FLUORESCENT
Coated
13PL
GX23-2 Base
32PL
Coated
GX24q-3 Base
42PL
Coated
GX24q-4 Base
Max.
Amps.
3500
Starting
Amps.
Initial
Lumens 1
15000
Open
Circuit
Life
(Hours)
M98
PULSE START METAL HALIDE
50PMH
ED-17 Coated
Medium Base
Operating
Amps.
ANSI
Ballast
Type
50
Lamp
Voltage
Lamp
Watts
Lamp and Electrical Guide
120
208
240
277
347
120
208
240
277
347
0.63
0.40
0.35
0.33
0.24
0.80
0.46
0.40
0.35
0.28
1.16
0.67
0.57
0.50
0.48
1.90
1.00
0.90
0.80
0.65
0.87
0.51
0.47
0.32
0.21
0.55
0.30
0.25
0.25
0.20
1.16
0.67
0.57
0.50
0.48
1.90
1.00
0.90
0.80
0.65
120
0.80
1.90
0.55
1.90
208
240
277
347
120
208
240
277
347
120
208
240
277
347
0.46
0.40
0.35
0.28
1.15
0.66
0.58
0.50
0.40
1.15
0.66
0.58
0.50
0.40
1.00
0.90
0.80
0.65
2.30
1.40
1.15
1.00
1.00
2.30
1.40
1.15
1.00
1.00
0.30
0.25
0.25
0.20
1.20
0.80
0.65
0.60
0.40
1.20
0.80
0.65
0.60
0.40
1.00
0.90
0.80
0.65
2.30
1.40
1.15
1.00
1.00
2.30
1.40
1.15
1.00
1.00
120
208
240
277
120
208
240
277
347
120
208
240
277
347
120
208
240
277
347
120
208
240
277
347
0.55
0.33
0.30
0.26
0.81
0.47
0.40
0.35
0.30
0.81
0.47
0.40
0.35
0.30
1.15
0.67
0.58
0.50
0.39
1.15
0.67
0.58
0.50
0.39
1.24
0.60
0.52
0.45
1.45
0.85
0.75
0.65
0.55
1.45
0.85
0.75
0.65
0.55
2.20
1.25
1.10
0.85
0.70
2.20
1.25
1.10
0.85
0.70
0.58
0.35
0.31
0.25
0.75
0.45
0.37
0.35
0.30
0.75
0.45
0.37
0.35
0.30
1.30
0.75
0.65
0.60
0.45
1.30
0.75
0.65
0.60
0.45
1.24
0.60
0.52
0.45
1.45
0.85
0.75
0.65
0.55
1.45
0.85
0.75
0.65
0.55
2.20
1.25
1.10
0.85
0.70
2.20
1.25
1.10
0.85
0.70
120
277
120
208
240
277
120
208
240
277
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
0.30
0.13
0.31
0.18
0.15
0.13
0.41
0.24
0.20
0.18
120
277
120
277
120
277
–
–
–
–
–
–
–
–
–
–
–
–
0.25
0.11
0.38
0.16
0.50
0.22
–
–
–
–
–
–
All initial lumen values shown may vary, from one manufacturer to another. Consult lamp manufacturer’s data for exact lumen and life data.
NOTE: For lamp/ballast information outside of the U.S.A. and Canada, please consult your local Kim representative.
WARNING: All fixtures must be grounded in accordance with local codes or the National Electrical Code. Failure to do so may result in serious
personal injury.
Lamps by others.
1
KIM LIGHTING
69