smart lighting controls
WORKHORSE LED
The Smart System Solution for DALI® Controlled Lighting
Fulham WorkHorse LED Programmable DALI Drivers and CNS’s elitedali software
TM
• Advanced driver management and internet enabled control system
-- Simplified installation and commissioning
-- Real-time access to all lighting device information
• Intelligent Programmable Drivers
------
Output current can be set in 1mA increments
Flicker free dimming down to 1%
Dims to 1% of programmed current
Power to driver not required during programming
NTC thermal feedback for LED module thermal protection
• elitedaliTM Ready for Global to Small Office or Commercial Projects
-- Internet of Things (IoT), smart device and cloud analytics compatible
-- Powered by Tridium® Niagara
• Fully Compliant Digital Addressable Lighting Interface (DALI) support
-- Only global IEC 62386 communications standard for intelligent light fixtures
-- Works over a two wire network
-- Thousands of compatible fixtures available worldwide
Fulham and Control Network Solutions (CNS) have developed a smart solution that is the industry’s
easiest to commission and operate DALI management and control system. Building on both companies’
technology strengths, the combined solution delivers on the promise of lighting control systems with
unmatched simplicity and expandability.
With Fulham WorkHorse LED drivers and elitedali TM software, you and your customers can enjoy the
industry’s easiest-to-use DALI control system available on the market today.
DALI Drivers
Intelligent, Programmable, Dimmable
WORKHORSE LED
Watts
Output Current (mA)
Output Voltage (VDC)
Model Number
Input Voltage (VAC) Dimensions (LxWxH)
40
250 - 1500
10 - 57
T1A1UNV105P-40E
120-277 (50/60)
60
250 - 1500
10 - 57
T1A1UNV105P-60E
120-277 (50/60)
60
250 - 1500
10 - 57
T1A1UNV105P-60F
120-277 (50/60)
60
250 - 1500
10 - 57
T1A1UNV105P-60G
120-277 (50/60)
Case Type
Linear w/ End
Terminals
Linear w/ End
9.33” x 1.60” x 1.18”
Terminals
Compact w/
5.00” x 3.00” x 1.22” End and Back
Terminals
Compact w/
End and Back
5.00” x 3.00” x 1.22” Terminals,
Back
Studs
10.83” x 1.22” x 0.98”
All Fulham WorkHorse LED drivers use SmartSet one-touch Programming.
Options: All of the above are also available with 0-10V dimming
RoHS
COMPLIANT
smart lighting controls
CNS’s elitedali™ for Niagara DALI driver enables system integrator partners and OEMs to use existing Niagara tools, skills
and knowledge to connect up to 1,280 DALI lamps and 20 DALI networks to 1 Niagara Platform using only Niagara for all DALI
network and device commissioning, control, maintenance, management, visualisation and analytics.
Discover and commission networks of DALI open standard
light fixtures
No Third Party commissioning tools or processes required
Automatic DALI device modeling
No data IO mapping and labeling required, reduced
commissioning time and risk
Use with any DALI manufacturers’ products conforming to
the DALI IEC 62386 standard
For more information on finding or becoming a Certified elitedali™ Partner, visit www.elitedali.com,
send an email to mike@control-network-solutions.co.uk or call +44 (0) 1256 818700.
www.fulham.com
North America • China • Europe • India • Latin America • Middle East
Lighting...Global. Intelligent. Sustainable.
Fulham Headquarters: 12705 S. Van Ness Avenue, Hawthorne, CA 90250 • Tel: +1 (323) 599-5000
Fax: +1 (323) 754-9060 • order@fulham.com
©Fulham Co., Inc. 2016 | All trademarks are the property of their respective owners