“HINGE YOUR WELD-ON HARDWARE NEEDS ON US!”
www.intercononline.com
CAT 303 / No guarantee for weights and dimensions. The right to alterations is reserved.
Valid from 04/11
TABLE OF CONTENTS
4
5
INTERCON ENTERPRISES Company Profile
WELD-ON-HINGES – Teardrop Profile – Introduction
WELD-ON-HINGES (Teardrop Profile)
FES Series (Mild Steel – 2 pc w/steel pin)
FMS Series (Mild Steel – 2 pc w/brass pin)
FES/GF and FMS/GF (Same as above w/Grease Fitting)
6
ALU Series (Aluminum – 2 pc w/stainless pin) + GF models
V2A Series (Stainless – 2 pc w/stainless pin) + GF models
A3E Series (Mild Steel – 3 pc – HEAVY DUTY w/removable pin)
7
AES Series (Mild Steel – 2 pc w/removable pin)
*Important Application Notes & Weld-on Diagrams (Line Drawings)
8
BUTT HINGES – HEAVY DUTY (Weld-on / Non-Swaged)
H18 Series (Mild Steel)
9
FLAG HINGES – HEAVY DUTY (Weld-on w/removable pin & end plug)
KOS Series (Mild Steel – 2 pc) & K3S Series (Mild Steel – 3 pc)
10
CONTAINER HINGE – EXTRA HEAVY DUTY (Weld-on w/removable pin + Grease Fitting)
H92 Model (Forged Steel – 3 pc)
11
GATE HINGES – HEAVY DUTY (Weld-on)
H77 Series (Mild Steel – Adjustable)
12
HANDLES – (Weld-on/Bolt-on)
G03 Model Heavy Duty Weld-on(Forged Steel)
G04 Model Weld-On (Mild Steel)
G05 Model Weld-On (Aluminum)
G06 Model Weld-On (Stainless)
G10 Model Bolt-on/Screw-on (Galvanized Steel)
DRAW LATCHES – NON-ADJUSTABLE STYLE
L11 Series (Galvanized Steel & Stainless)
L21 Series (Galvanized Steel & Stainless)
L22 Series – Lockable (Galvanized Steel & Stainless)
Includes: C & D Latch Hooks
ADJUSTABLE STYLE
L32 Series (Galvanized Steel & Stainless)
L26 Series - Lockable (Galvanized Steel)
Includes: C & D Latch Hooks
CONTAINER RING – (Weld-on/Bolt-on/Screw-on) – Used for Rope/Rigging, etc.
C03 Model (Galvanized Steel – recessed for Flush Mount)
“D” RINGS – HEAVY DUTY (Weld-on & Bolt-on Models)
DRW Series (Steel Weld-on) & DRB Series (Steel Bolt-on)
HOOKS – (Weld-on)
C02 Model EXTRA HEAVY DUTY (Cast Steel)
13
14
15
16
17
ASH Series HEAVY DUTY (Forged Steel w/Safety Clip)
Display Basket for Weld-on-Hinges (Counter-top unit for Distributor Sales)
TERMS & CONDITIONS OF SALE
www.intercononline.com
Toll Free: 1-800 665-6655
18
19
3
Since 1978
COMPANY PROFILE
I
ntercon Enterprises Inc. (Est. 1978), consistently delivers high quality products
to the manufacturing/fabricating/welding industry. Founded by Mr. Alfred Schenk,
Intercon has grown and prospered over the last 3.1/2 decades by delivering on
its’ motto of providing “leading performance through innovation and quality”. The
attributes of this motto direct the unique products, their manufacturing process and
the sales/marketing philosophy that is Intercon Enterprises Inc.
Intercon is well known as a manufacturer and supplier of the unique, teardrop profile,
Weld-on-Hinges & Industrial Hardware (BAER Hardware). The success with this line
of hinges comes through the fact that they have a professional appearance, eliminate
fasteners and unsightly leaves, are engineered with a high weight load capacity to
size ratio and are ideal for gates, toolboxes, doors, access panels, trailers and more.
Intercon’s built on this success with a complete Hardware Program for the OEM &
Fabrication industry – ie., weld-on-hinges, draw latches, hooks and handles.
Intercon’s other products can benefit you, your company and your daily manufacturing
operations – view these on our website: www.intercononline.com
INTERPURGE – Pipe Weld Purging Systems & Accessories
(World leading technology for the stainless & titanium pipe welding industries.)
HARDY “Non-Sparking” TOOLS – Aluminum Bronze, Beryllium Copper & Titanium
(Hand tools used where a “spark” may contribute to an explosion or risk of fire.)
JOKISCH – Machining/Grinding Coolants, Tapping Oils & Welding Anti-Spatters
(High Quality Industrial Fluids Manufactured in Germany since 1961.)
TIGRIP & INTERLIFT – Plate Clamps, Crane Forks, Lifting Magnets & Assorted
Material Handling Grabs for “everything under the hook” lifting applications.
For other information, more technical related enquiries, (or a complete Master
Catalog), contact us at 1-800-665-6655 or e-mail: sales@intercononline.com
4
Toll Free: 1-800 665-6655
www.intercononline.com
WELD-ON HINGES (Tear-drop Profile)
FES
8 Inch
FEATURES
• High Load Capacity
• Professional Appearance
• Ideal For Gates, Toolboxes, Doors, Trailers, BBQs, Etc.
• Permits Smooth Operation
• Eliminates Fasteners & Unsightly Leaves
• Can Be Welded On As Lift-off or Permanently Mounted
• Paintable To Match Door or Frame
• Can Be Galvanized
• Available With Grease Fittings
FES
6 Inch
FES
4 Inch
FES
3 3/16 Inch
FES
2 Inch
www.intercononline.com
Toll Free: 1-800 665-6655
5
WELD-ON HINGES
STEEL
• Made from special profile steel for
weld-on applications
• Esthetic half-round heads and 360°
rotation of V-shaped flanges allow
for ease of weld-on installation
• Brass washer on each hinge permits
smooth continuous operation
FIXED PIN TYPE:
FES - Mild Steel (1015) with case-hardened steel pin and
brass washer
FMS♦ - Mild Steel (1015) with brass pin and brass washer
Model
Steel Pin
L
Model♦
Length
Brass Pin
inches
D/S
Cross Section
inches
d
Weight Load
Pin Diameter
Per Pair
inches
lbs. *
FES050
FMS050
2”
5/16” - 13/32”
3/16”
150
FES060
FMS060
2.3/8”
13/32” - 15/32”
1/4”
185
FES070
n/a
2.3/4”
7/16” - 17/32”
9/32”
185
FES080
FMS080
3.3/16”
1/2” - 5/8”
5/16”
300
FES090
n/a
3.1/2”
9/16” - 23/32”
11/32”
300
FES100
FMS100
4”
5/8” - 3/4”
13/32”
440
FES120
n/a
4.3/4”
5/8” - 3/4”
7/16”
440
FES135
n/a
5.1/4”
23/32” - 29/32”
15/32”
550
FES150
FMS150
6”
3/4” - 1”
1/2”
650
FES180
FMS180
7”
3/4” - 1”
9/16”
650
FES200
FMS200
8”
29/32” - 1.1/8”
5/8”
800
FES260
n/a
10”
Available with Grease Fitting only: See table below
STEEL WITH GREASE FITTING
GREASE FITTING:
• Made from special profile steel for
weld-on applications
• Esthetic half-round heads and 360°
rotation of V-shaped flanges allow
for ease of weld-on installation
• Brass washer on each hinge permits
smooth continuous operation
• Zirc fitting allows for additional
lubrication (grease) to be applied
to hinges with high duty cycles,
exposure to intermittent moisture or
high humidity
FIXED PIN TYPE:
FES-GF - Mild Steel (1015) with case hardened steel pin, brass
washer and grease fitting
FMS-GF♦ - Mild Steel (1015) with brass pin and brass washer
Model
Steel Pin
FES060GF
L
D/S
d
Weight Load
Model♦
Length Cross Section Pin Diameter
Per Pair
Brass Pin
inches
inches
inches
lbs. *
n/a
2.3/8”
13/32” - 15/32”
1/4”
185
FES080GF FMS080GF 3.3/16”
1/2” - 5/8”
5/16”
300
FES100GF FMS100GF
4”
5/8” - 3/4”
13/32”
440
FES120GF FMS120GF
4.3/4”
5/8” - 3/4”
7/16”
440
FES150GF FMS150GF
6”
3/4” - 1”
1/2”
650
FES200GF FMS200GF
8”
29/32” - 1.1/8”
5/8”
800
FES260GF FMS260GF
10”
1.1/8” - 1.7/16”
3/4”
1000
Model Brass Pins’ load capacity is 20% less than listed
*Please See Page 8 for Notice regarding printed weight loads
♦
6
Toll Free: 1-800 665-6655
www.intercononline.com
WELD-ON HINGES
ALUMINUM
FIXED PIN TYPE:
ALU - Aluminum (6063) with stainless
steel pin and stainless washer
• Made from special profile aluminum
for weld-on applications
• Esthetic half-round heads and 360°
rotation of V-shaped flanges allow
for ease of weld-on installation
• With stainless washer
Model
Model
Grease
Fitting
ALU060
n/a
L
D/S
Length Cross Section
inches
inches
2.3/8”
d
Pin Diameter
inches
Weight Load
Per Pair
lbs. *
13/32” - 15/32”
1/4”
200
ALU080
ALU080GF 3.3/16”
1/2” - 5/8”
5/16”
350
ALU100
ALU100GF
4”
5/8” - 3/4”
13/32”
500
ALU150
ALU150GF
6”
3/4” - 1”
1/2”
650
Model
Model
Grease
Fitting
d
Pin Diameter
inches
Weight Load
Per Pair
lbs. *
V2A060
n/a
13/32” - 15/32”
1/4”
400
STAINLESS STEEL
FIXED PIN TYPE:
V2A - Stainless steel (304) with
stainless steel pin and stainless
washer
• Made from special profile stainless
steel for weld-on applications
• Esthetic half-round heads and 360°
rotation of V-shaped flanges allow
for ease of weld-on installation
• With stainless washer
L
D/S
Length Cross Section
inches
inches
2.3/8”
V2A080
V2A080GF 3.3/16”
1/2” - 5/8”
5/16”
600
V2A100
V2A100GF
4”
5/8” - 3/4”
13/32”
750
V2A150
V2A150GF
6”
3/4” - 1”
1/2”
900
V2A200
V2A200GF
8”
29/32” - 1.1/8”
5/8”
1200
STEEL 3 PIECE HEAVY DUTY
REMOVABLE PIN TYPE:
A3E - Mild Steel (1015) with case
hardened steel pin and brass
washers. A locking “snap
ring” washer at the end of the
removable pin, keeps the pin
in place.
Model
L
Length
inches
D/S
Cross Section
inches
d
Pin Diameter
inches
Weight Load
Per Hinge
lbs. *
A3E135
5.1/4”
23/32” - 29/32”
15/32”
1500
A3E150
6”
3/4” - 1”
1/2”
2000
A3E200
8”
29/32” - 1.1/8”
5/8”
4000
• Made from special profile steel for
weld-on applications
• Pin with half-round head and
sections with V-shaped flanges
allow for ease of weld-on installation
• With brass washers
S
d
L
D
*Please See Page 8 for Notice regarding printed weight loads
www.intercononline.com
Toll Free: 1-800 665-6655
7
WELD-ON HINGES
STEEL REMOVABLE PIN
• 2 Piece hinge with removable pin
• Made from special profile steel for
weld-on applications
• Pin with half-round head and
sections with V-shaped flanges
allow for ease of weld-on
installation
• With brass washer
REMOVABLE PIN TYPE:
AES - Mild steel (1015) with removable steel pin and brass
washer
Model
L
Length
inches
D/S
Cross Section
inches
d
Pin Diameter
inches
Weight Load
Per Pair
lbs. *
AES050
2”
5/16” - 13/32”
3/16”
110
AES080
3.3/16”
1/2” - 5/8”
5/16”
240
AES100
4”
5/8” - 3/4”
13/32”
420
AES150
6”
3/4” - 1”
1/2”
530
AES200
8”
29/32” - 1.1/8”
5/8”
660
L
S
d
D
*IMPORTANT: The printed weight loads should be used as a general guideline only. Load compensation
should be made when determining the size and number of hinges for applications that may be subject
to dynamic forces (shock loads), areas where the pin is set in a horizontal position, and other uses
that create extra pin stress (ie. long gates, wide doors, etc.). Addition of heat-resistant molybdenum
or lithium-based greases to the hinge’s internal body before final assembly is recommended and may
provide freer movement and a longer life. No guarantee for weight loads and dimensions.
8
Toll Free: 1-800 665-6655
www.intercononline.com
WELD-ON BUTT HINGES
H18 - STEEL HEAVY DUTY
Heavy-duty design with non-removable
pin and five knuckles in plain steel
for applications such as steel doors,
industrial equipment, access panels,
toolboxes, cabinets, gates, etc. A nonswaged hinge specifically designed for
weld-on applications with no holes to
fill and a professional appearance in 4
common sizes.
Model
Hinge
Length
A
Width Thickness Knuckle Dia. Pin Dia.
B
C
D
E
Box
Qty.
H18-050
2” x 2”
2.0”
2.0”
0.098”
0.395”
0.197”
20
H18-075
3” x 3”
3.0”
3.0”
0.108”
0.492”
0.276”
20
H18-100
4” X 4”
4.0”
4.0”
0.138”
0.552”
0.276”
20
H18-125
5” x 5”
5.0”
5.0”
0.157”
0.630”
0.315”
10
D
B
A
Fast Spun Both Ends
EØ
C
C
www.intercononline.com
Toll Free: 1-800 665-6655
9
WELD-ON FLAG HINGES
KOS & K3S - MILD STEEL
The weld-on flag hinge is used for applications similar to those of a regular hinge, but where a flap is
required. Applications range from thin access doors to heavy-duty fire doors. The 3-piece design is
especially suited to heavy container doors and flaps.
2 PIECE HINGES - KOS SERIES
Mild Steel Hinge with Chromed Steel Pin & Plug
a
d
b
e
f
Order #
Length
Pin Dia.
Flap Width
Thickness
Flap Length
KOS
4"-100mm
11/32"-9mm
1 3/16"-30mm
0.120"-3mm
2"-50mm
KOS100
5 1/2"-140mm
9/16"-14mm
2"-50mm
0.157"-4mm
2 3/4"-70mm
KOS140
6 1/4"-160mm
5/8"-16mm
2"-50mm
0.200"-5mm
3 3/16"-80mm KOS160
a
f
dØ
b
e
e
3 PIECE HINGES - K3S SERIES
Mild Steel Hinge with Chromed Steel Pin & Plug
10
a
d
b
e
f
Order #
Length
Pin D ia.
Flap Width
Thickness
Flap Length
K 3S
8 5/8"-220mm
9/16"-14mm
2"-50mm
0.157"-4mm
2 3/4"-70mm
K 3S 220
10 1/4"-260mm
5/8"-16mm
2"-50mm
0.200"-5mm
3 3/16"-80mm
K 3S 260
12"-300mm
3/4"-20mm
2"-50mm
0.236"-6mm
4"-100mm
K 3S 300
Toll Free: 1-800 665-6655
a
f
dØ
b
e
www.intercononline.com
e
CONTAINER HINGE
H92 - FORGED STEEL HEAVY DUTY
The H92 is an extremely heavy-duty forged weld-on hinge with
grease fitting that can be used for containers (i.e. garbage),
trailers and ramps. The forged flaps and 3/4” (20 mm) shaft make
it one of the most heavy-duty hinges available.
H92 HEAVY-DUTY HINGE
6" Forged Steel Heavy-Duty Weld-On
Container Hinge
Order #
H92.150.1W0
www.intercononline.com
Toll Free: 1-800 665-6655
11
GATE HINGE
H77 - HEAVY DUTY - MILD STEEL
The H77 weld-on gate hinge is specifically designed
for steel gates. There are four different pin diameters
ranging from 1/2” to 1” for a variety of applications
including gate doors; both walk-through and drivethrough. The easy weld-on application and adjustability
of the nut make this hinge very attractive. The H77 is
very strong and gives a professional look.
H77 GATE HINGE - Mild Steel with Galvanized Bolt, Nuts, Washers, Pin and Brass Bushings
12
Pin Dia.
(d)
Eye Width
(A)
Thickness
H1
B
L
H2
Load
Per Pair
1/2”
1.1/16”
3/16”
1”
1.3/4”
1.3/8” - 3.3/16”
1.9/16” - 2.5/16”
440 lbs
12mm
17mm
5mm
25mm
45mm
34 - 80mm
40 - 59mm
200 kgs
5/8”
1”
5/16”
1.1/8”
2.1/8”
1” - 3.5/8”
2.1/8” - 2.11/16”
660 lbs
16mm
25mm
8mm
28mm
54mm
25 - 93mm
54 - 68mm
300 kgs
3/4”
1.3/16”
5/16”
1.3/8”
3.1/8”
1.3/8” - 4”
3.7/16” - 4.3/16”
990 lbs
20mm
30mm
8mm
35mm
79mm
35 - 100mm
87 - 107mm
450 kgs
1”
1.3/8”
13/32”
1.3/8”
3.1/8”
1.9/16” - 4.3/8”
3.1/2” - 4.9/32”
1320 lbs
24mm
34mm
10mm
35mm
79mm
40 - 12mm
89 - 109mm
600 kgs
Toll Free: 1-800 665-6655
Order #
H77.012.1W0
H77.016.1W0
H77.020.1W0
H77.024.1W0
www.intercononline.com
HANDLES
FORGED STEEL, STEEL, ALUMINUM, STAINLESS & GALVANIZED
The G03 handle is available in forged steel for weld-on applications such as farm equipment and bins.
G03 HANDLE
Unfinished Forged Steel Handle
for Weld-On Applications
Order #
G03.200.1W0
These round bodied weld-on handles can be used on doors, gates, access panels, storage boxes and
other fabrications. The flattened ends can also be drilled for screw-on and bolt-on applications.
B
A
C
D
Material Dia.
A
Handle Length
B
Height
C
O.A.L.
D
Order #
G04 (STEEL)
1/2”
8”
2”
13”
G04.330.1WO
G05 (ALUMINUM)
1/2”
8”
2”
13”
G05.330.2WO
G06 (STAINLESS)
1/2”
8”
2”
13”
G06.330.9WO
Handles Models
The G10 chest handle in galvanized steel for bolt-on applications is ideal for boxes, crates, equipment
and cases.
G10 HANDLE
Bolt-On Chest Handle
in Galvanized Steel
Order #
G10.135.3X0
www.intercononline.com
Toll Free: 1-800 665-6655
13
NON-ADJUSTABLE DRAW LATCHES
GALVANIZED & STAINLESS STEEL
These latches are a non-adjustable type. Two sizes (3 models) available in galvanized and stainless steel.
L11
L21
L22
L11, L21 & L22 DRAW LATCHES
Style
L
L11
L21
L22
B
H
I
b
h
b1
d1
f
2.1/8”
7/8”
3/8”
1.7/16”
7/16”
5/16”
5/8”
1/8”
1/4”
55mm
23mm
10mm
36mm
11mm
8mm
16mm
3mm
10mm
4.5/16”
1.1/2”
7/16”
2.7/8”
3/4”
7/16”
1.1/8”
3/16”
9/16”
110mm
38mm
11mm
73mm
20mm
11mm
28mm
4mm
14mm
4.5/16”
1.1/2”
15/16”
2.7/8”
3/4”
7/16”
1.1/8”
3/16”
9/16”
110mm
38mm
24mm
73mm
20mm
11mm
28mm
4mm
14mm
Order #
GALVANIZED
STAINLESS
L11.055.3X0
L11.055.9X0
L21.110.3X0
L21.110.9X0
L22.110.3X0
L22.110.9X0
LATCH HOOKS - GALVANIZED & STAINLESS STEEL
d
B
d
B
L
H
S
L10C
C Hook for L11
e1 e2
e1 e2
L
D Hook
L
L10D
D Hook for L11
L
H
S
H
C Hook
B
B
e1 e2
e1 e2
S
d
d
S
L20C
C Hook for L21/L22
H
Depending on the
application, choose
your required hook;
either Type C or D.
L20D
D Hook for L21/L22
HOOKS FOR L11, L21 & L22 DRAW LATCHES
Style & Latch
C Hook for L11
D Hook for L11
C Hook for L21/L22
D Hook for L21/L22
14
B
L
S
H
d
e1
e2
1/2”
1.1/8”
1/16”
5/16”
1/8”
5/16”
3/8”
13mm
28mm
1.5mm
8mm
3.7mm
8mm
9.5mm
1/2”
1.3/16”
1/16”
3/16”
1/8”
5/16”
3/8”
13mm
30mm
1.5mm
4.3mm
3.7mm
8mm
9.5mm
1.1/8”
1.7/16”
1/8”
7/16”
3/16”
1/4”
7/16”
28mm
37mm
3mm
11.5mm
4.1mm
7mm
11mm
1.1/8”
1.3/4”
1/8”
3/8”
3/16”
1/4”
7/16”
28mm
45mm
2mm
9mm
4.3mm
7mm
11mm
Toll Free: 1-800 665-6655
Order #
GALVANIZED STAINLESS
L10.C13.3X0 L10.C13.9X0
L10.D13.3X0 L10.D13.9X0
L20.C28.3XS L20.C28.9X0
L20.D28.3X0 L20.D28.9X0
www.intercononline.com
ADJUSTABLE DRAW LATCHES
GALVANIZED & STAINLESS STEEL
The L32 is the most common adjustable draw latch and is available in both galvanized and stainless steel.
It is used for cladding, boxes and equipment.
The L26 adjustable draw latch is for applications requiring a forceful latch with a forged hook. This heavier
duty model has a lockable padlock eye and comes in a galvanized finish only.
L32
L26
L32 & L26 DRAW LATCHES
Style
L32
L26
L
B
4.15/16” 1.5/16”
H
I
b
h
b1
d1
f
d
e1
e2
M
3/4”
2.3/8”
1.1/16”
11/16”
3/4”
3/16”
1.7/8”
3/16”
5/16”
1.5/8”
125mm
33mm
18mm
60mm
26mm
17mm
20mm
5mm
48mm
4.3mm
8mm
43mm
5.3/4”
1.13/16”
7/8”
2.3/4”
1.1/4”
7/8”
1.3/16”
1/4”
1.9/16”
1/4”
3/8”
1.1/8”
145mm
46mm
22mm
70mm
32mm
22mm
30mm
6.5mm
40mm
6.2mm
10mm
30mm
Order #
GALVANIZED STAINLESS
M6
L32.125.3X0 L32.125.9X0
M8
L26.145.3X0
n/a
LATCH HOOKS - GALVANIZED & STAINLESS STEEL
d
B
L
L30C
C Hook for L32
S
e1 e2
e 1 e2
L
D Hook
L
L30D
D Hook for L32
L
H
S
H
C Hook
B
B
e1 e2
H
d
B
e1
S
d
d
S
L20C
C Hook for L26
H
Depending on the
application, choose
your required hook;
either Type C or D.
L20D
D Hook for L26
HOOKS FOR L32 & L26 DRAW LATCHES
Style & Latch
C Hook for L32
D Hook for L32
C Hook for L26
D Hook for L26
B
L
S
H
d
e1
e2
23/32”
7/8”
1/8”
3/8”
3/16”
3/8”
-
18mm
23mm
2mm
10mm
4.1mm
9mm
-
23/32”
2”
1/8”
5/16”
3/16”
1/4”
7/8”
18mm
50mm
2mm
8mm
4.1mm
7mm
21mm
1.1/8”
1.7/16”
1/8”
7/16”
3/16”
1/4”
7/16”
28mm
37mm
3mm
11.5mm
4.1mm
7mm
11mm
1.1/8”
1.3/4”
1/8”
3/8”
3/16”
1/4”
7/16”
28mm
45mm
2mm
9mm
4.3mm
7mm
11mm
www.intercononline.com
Order #
GALVANIZED STAINLESS
L30.C18.3X0 L30.C18.9X0
L30.D18.3X0 L30.D18.9X0
L20.C28.3XS L20.C28.9X0
L20.D28.3X0 L20.D28.9X0
Toll Free: 1-800 665-6655
15
HOOKS & D-RINGS
C03 -CONTAINER HOOK - GALVANIZED STEEL
The C03 container hook is ideal for trucks, trailers, railroad cars,
and machinery. It can be inserted into the surface for a flush
installation. The C03 is made of galvanized steel.
CO3 C ON TAINER HOOK
4” Container Hook - Galvanized Steel
Order #
C03.102.3X0
.375”
.125”
.275”
4”
1.375”
.875”
3.75”
“D” RINGS
These Heavy Duty “D” Rings have a
multitude of uses. They are used primarily
as temporary lifting (suspension) points
on unwieldy structures and fabrications.
A
E
C
D
B
The “D” Rings are also used for ‘tiedown” points on similar objects for secure
transport. Available in Weld-On (DRW)
and Bolt-On (DRB) models.
WELD-ON “D” RINGS
A
B
C
D
E
Order #
3.38”
3.50”
2.00”
0.500”
0.250”
DRW 0.500
4.25”
4.25”
2.50”
0.625”
0.375”
DRW 0.625
4.50”
4.50”
2.50”
0.750”
0.375”
DRW 0.750
5.00”
6.00”
2.50”
1.000”
0.375”
DRW 1.000
A
F
H
I
G
D
B
BOLT-ON “D” RINGS
A
16
B
D
3.38”
3.50”
0.500”
4.25”
4.25”
0.625”
Toll Free: 1-800 665-6655
F
G
H
I
Order #
1.75”
3.25”
0.250”
0.500”
DRB 0.500
2.25”
3.75”
0.375”
0.500”
DRB 0.625
www.intercononline.com
HOOKS
C02 - ROPE HOOK - STEEL
The C02 weld-on rope hook in cast steel is used for trucks,
trailers, railroad cars, and machinery.
CO2 WELD-ON ROPE HOOK
5 1/2" Weld-On Rope Hook in Steel
Order #
C02.140.1W0
4”
5.1/2”
2.9/16”
ASH HOOK - FORGED STEEL
The ASH weld-on hooks
are used for trucks, trailers,
railroad cars, and machinery.
It comes with a safety clip to
prevent accidental removal.
Four sizes are available.
ASH Weld-On Hook
SWL
Weld Seam
a
ASH 0.5
2200 lb
1 0 0 0 kg
1/8"
4mm
3 9/16" x 1"
90mm x 25mm
5/8"
17mm
15/16"
24mm
1/4"
6mm
3"
76mm
7/8"
22mm
0.9 lb
0.4 kg
4100.0104
ASH 1.5
6600 lb
3 0 0 0 kg
3/16"
5mm
5 1/8" x 1 3/8"
130mm x 35mm
15/16"
24mm
1 1/8"
29mm
5/16"
8mm
4 1/8"
105mm
1 1/8"
28mm
2.75 lb
1.25 kg
4100.0035
ASH 2.5
11000 lb
5 0 0 0 kg
3/16"
5mm
6 5/16" x 1 3/4"
160mm x 45mm
1 3/16"
30mm
1 7/16"
37mm
3/8"
10mm
5 3/16"
132mm
1 7/8"
47mm
5.18 lb
2.35 kg
4100.0036
ASH 4.0
17600 lb
8 0 0 0 kg
1/4"
7mm
6 11/16" x 2"
170mm x 50mm
1 9/16"
40mm
1 7/8"
47mm
3/8"
10mm
5 7/16"
138mm
2"
50mm
7.94 lb
3.6 kg
4100.0037
Style
L 1x B 1
www.intercononline.com
B2
C
H1
H2
L2
Weight
Toll Free: 1-800 665-6655
Order #
17
WELD-ON-HINGES COUNTER-TOP DISPLAY
standard start-up inventory for new distributors*
FES200 - (8” O.A.L.)
FES150 - (6” O.A.L.)
FES100 - (4” O.A.L.)
FES080 - (3.3/16” O.A.L.)
FES050 - (2” O.A.L.)
Hinges packaged 25pcs/box
The counter-top display
makes the hinges more
visible to customers!
(Size: only 9” W x 15” L)
* Receive a FREE counter-top display and literature when ordering
the standard assortment of the 5 most commonly used mild steel sizes
(12 FES Hinge sizes available overall - see page 6 for hinge details)
18
Toll Free: 1-800 665-6655
www.intercononline.com
TERMS & CONDITIONS OF SALE
Pricing:
All prices and discounts are subject to change without prior notice.
Freight:
All shipments are F.O.B. Intercon Enterprises Inc. (Intercon’s Warehouse).
Terms:
VISA, MasterCard or American Express, unless credit has been approved by Intercon. All credit approved
account terms are NET 30 DAYS from date of invoice. Past due accounts are liable to an interest charge of
2% per month. Intercon reserves the right to withhold shipment of orders if an account is not up-to-date.
Claims:
Intercon is not responsible for goods lost or damaged in transit. Intercon will furnish all available
information, trace shipments to destination whenever possible to assist the purchaser in filing a claim.
Shortages in shipment not chargeable against the carrier must be claimed within 5 days of receipt of
merchandise.
Returned Goods:
No merchandise may be returned or exchanged without proof of purchase and prior authorization by
Intercon. Authorized returns must be shipped prepaid to Intercon and be received by the seller within
30 days. All items accepted for credit are subject to a 20% restocking charge.
Delivery:
Intercon is not responsible for nondelivery or delay in delivery due to delays, damages or losses resulting
from strikes, riots, floods, inability to secure materials or other accidents or occurrences beyond their
control.
Minimum Order:
$100.00 net price (excluding freight).
Standard Packages:
Minimum packages are indicated in the price schedule.
Drawings:
All drawings and dimensions shown in this catalog are for reference only.
Miscellaneous:
Title of goods remains with Intercon until such time as same are paid in full. In the event of default payment,
Intercon shall be permitted to retake possession of the goods without either notice or prejudice to any
other rights and remedies available to Intercon.
Quotations:
All quotations are firm for 30 days only.
Copyright © 2011 Intercon Enterprises Inc. - All Rights Reserved
www.intercononline.com
Toll Free: 1-800 665-6655
19
1-800 665-6655
Tel: (604) 946-6066
Fax: (604) 946-5340
1125 Fir Ave.
11-7550 River Rd.
Blaine, WA 98230
Delta, BC V4G 1C8
U.S.A
Canada
E-mail: sales@intercononline.com
www.intercononline.com