SBA-TrafoTech GmbH
Winkelleite 14
91332 Heiligenstadt/Ofr.
Tel: 09198/809-19
Fax:09198/809-30
Mail: verkauf@sba.de
480W Single Output Industrial DIN RAIL with PFC Function
SBA-Art.Nr.:
761-2420
SRP-480 series
Features :
Built-in passive PFC function compliance to EN61000-3-2
High efficiency 89% and low dissipation
Protections:Short circuit/Over load/Over voltage/Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
Can be installed on DIN rail TS-35/7.5 or 15
UL 508(industrial control equipment)approved
EN61000-6-2(EN50082-2) industrial immunity level
100% full load burn-in test
3 years warranty
SPECIFICATION
SRP-480-24
MODEL
OUTPUT
INPUT
R
DC VOLTAGE
24V
RATED CURRENT
20A
CURRENT RANGE
0 ~ 20A
RATED POWER
480W
761-2420
RIPPLE & NOISE (max.) Note.2 120mVp-p
VOLTAGE ADJ. RANGE
24 ~ 28V
VOLTAGE TOLERANCE Note.3 1.0%
LINE REGULATION
0.5%
LOAD REGULATION
1.0%
SETUP, RISE, HOLD TIME
1200ms, 40ms, 16ms/230VAC at full load
VOLTAGE RANGE
180 ~ 264VAC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR
EFFICIENCY (Typ.)
0.7 (for DRP-480)
89%
AC CURRENT
INRUSH CURRENT (max.)
6A/230V
COLD START 50A/230VAC
250 ~ 370VDC
LEAKAGE CURRENT
<3.5mA / 240VAC
OVER LOAD
105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
30 ~ 36V
Protection type : Shut down o/p voltage, re-power on to recover
100
5 (TSW : Detect on heatsink of power switch)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-20 ~ +70
(Refer to output load derating curve)
20 ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH
0.03%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL508, TUV EN60950 Approved
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
SAFETY & ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
EMC
(Note 4)
HARMONIC CURRENT
Compliance to EN61000-3-2,-3(For DRP-480)
EMS IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A
180.9Khrs min.
MIL-HDBK-217F (25
)
227*125.2*100mm (W*H*D)
2.1Kg; 6pcs/12.6Kg/1.75CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:SRP 2003-11-07
SBA-TrafoTech GmbH
Winkelleite 14
91332 Heiligenstadt/Ofr.
Tel: 09198/809-19
Fax:09198/809-30
Mail: verkauf@sba.de
SBA-Art.Nr.:
761-2420
Mechanical Specification
Case No.930
227
125.2
100
Unit:mm
TB1
3 2 1
TB2
4 3 2 1
LED
ADJ
35
ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15
TB1 Terminal Pin. No Assignment
Pin No.
1
2
3
TB2 Terminal Pin. No Assignment
Assignment
AC/L
AC/N
FG
Pin No.
1,2
3,4
Derating Curve
Assignment
DC OUTPUT +V
DC OUTPUT -V
Output Derating VS Input Voltage
100
100
90
80
80
70
LOAD (%)
LOAD (%)
60
40
20
-20
0
10
20
30
40
AMBIENT TEMPERATURE (
50
)
60
70 (VERTICAL)
60
50
40
180
190
200
264
INPUT VOLTAGE (V) 60Hz
File Name:SRP-480 2003-11-07