CRISP WHITE
ADJUSTABLE
®
LNMT
PROJECT INFORMATION
Multi
CRISP WHITE
PROJECT
DATE
TYPE
NanoLED Multi Adjustable - The possibilities are limitless with NanoLED Multi: up to
4 independently adjustable heads, with 40° x 40° dual lockable aiming, and a variety of beam
distributions, NanoLED Multi is the solution for most retail, hospitality, cultural and residential
projects. Now available with Crisp White technology, NanoLED Multi can be used to enhance
retail displays by making red colors vibrant, bright blues pop, and white fabrics saturated with
UV-sensitive dyes shine the brightest white.
DELIVERED PERFORMANCE (Per Head)
®
Multi
14 Watts
CRISP WHITE
20 Watts
Color Rendering
90+CRI
Lumens per Watt
54
46
Source Lumens
875
1200
Delivered Lumens
750
975
Center Beam Candlepower (25°)
2135
2750
Color Consistency
2-Step MacAdam Ellipse
Heatsink Finish
Color area
Interior Finish
Color area
Performance based on: 3000K
Flange Finish
Color area
Head Finish
Color area
51⁄2"
Relative Output (W/nm)
7"
350
400
450
500
550
600
650
Wavelength (nm)
700
750
800
850
NanoLED Multi Crisp White technology has a new spectral power distribution rich in reds and blues.
Please contact factory for more information.
HOW TO SPECIFY
Ordering Example: Specify trim code and housing code to order: LNMT2 - 10 - 10 - 8414- L1 - 30KH - 25 - 10 - 10 - NC - 120V - DIML2 - CB27
TRIM ORDERING INFORMATION
TRIM
OPTION
LNMT ______
LNMT
NanoLED
Multi
Adjustable
1
2
3
4
–
1 Head
2 Heads
3 Heads
4 Heads
–
10
13
21
28
RAL
White
Statuary Bronze
Black
Metalized Grey
Special Color
(specify RAL#)
HOUSING ORDERING INFORMATION
HOUSING
NC New Construction
USAI
Lighting
VOLTAGE
–
NC
®
WATTAGE
(PER HEAD)
HEAT SINK
FINISH
HEAD FINISH
–
10 White
21 Black
–
8414 14W LED
750 lumens
(per head)
8420 20W LED
975 lumens
(per head)
OPTIONAL
DIMMING DRIVER
–
120V
277V
LIGHT
ENGINE
COLOR
–
L1
30KH
High CRI 90+
30KH 3000K, 90+ CRI
L1
–
DIML2 0-10V dim, 10%
DIML3 Lutron Hi-Lume 1%
2-wire, 120V only
DIML4 Lutron Hi-Lume 1%
3-wire/ECO
DIML6A ELDO 0-10V 0.1%,
logarithmic
DIML6B ELDO 0-10V 0.1%,
linear
DIML7 ELDO DALI 0.1%,
DIML9 TRIAC 15%, 120V
DIML10 ELV 15%, 120V
www.usailighting.com
info@usailighting.com
CB27
CB52
EML
EMLW
27" C-Channel Bars
52" C-Channel Bars
Emergency battery
Emergency battery, wet location
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
–
25
25 25° Distribution
2 Step MacAdam ellipse
is standard
ACCESSORIES
INTERIOR FINISH
REFLECTOR
–
FLANGE FINISH
–
10
13
21
28
RAL
10 White
White
Statuary Bronze 13 Statuary Bronze
21 Black
Black
Metalized Grey 28 Metalized Grey
RAL Special Color
Special Color
(specify RAL#)
(specify RAL#)
OPTICAL
ACCESSORIES
(Order separately)
Clearly specify quantity in your order
AL20D
AL30D
AL40D
AL55D
AS61D
BOFD
SOFD
PRFD
HEXD
Refer to optical accessories
matrix on next page for
resulting beamspreads when
accessory lens is combined
with 25° optics
Borosilicate Frosted
Solite Frosted
Prismatic Frosted
Hex Cell Louver 1/8"
© 2015. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 10/13/2015
®
CRISP WHITE
ADJUSTABLE
Multi CRISP WHITE
TRIM INFORMATION
LNMT1
LNMT3
NanoLED Multi Optical Accessories Matrix
if you want…
and you have….
25°
30° beam
AL20D
35° beam
AL30D
40° beam
AL40D
45° beam
AL55D
30x40° beam
AS61D
Borosilicate Frosted
BOFD
Solite Frosted
SOFD
Prismatic Frosted
PRFD
Hex Cell Louver 1/8"
HEXD
size D
4 /8"
3
Interior Finish
Color area
(10, 13, 21, 28, RAL)
51/2" x 51/2"
51/2" x 51/2"
51/2" x 161/2"
51/2"
7"
Flange Finish
Color area
(10, 13, 21, 28, RAL)
161/2"
7" x 7"
LNMT2
LNMT
18"
LNMT4
51/2" x 11"
51/2" x 221/8"
7"
51/2"
51/2"
7"
11"
121/2"
221/8"
HOUSING INFORMATION
235/8"
Optional Emergency
Battery Pack
New Construction
415/16"
117/8"
11/4" Max Ceiling Thickness
133/16"
117/8"
LNMT1 (1 lamp) : 181/4"
11/4"
7"
133/8"
LNMT2 (2 lamp) : 181/4"
LNMT3 (3 lamp) : 233/4"
LNMT4 (4 lamp) : 293/8"
SPECIFICATIONS
TRIM: Multiple square and rectangle apertures with a
3/4" flange, retained by two mounting clips. Trim finish is
available in White, Statuary Bronze, Black, and Metalized
Grey finishes. Custom color flanges available (provide
RAL#). Adjustable head finish, flange finish and trim interior
finish may all be specified independently.
OPTIC: Available in 25° beam distributions. The 25° optic is
provided with a solite lens. Additional beamspreads can be
achieved through use of accessories (order separately).
THERMAL MANAGEMENT: Proprietary high performance
aluminum die cast heatsink for maximum LED life. Ambient
temperatures at fixture location should not exceed 40°C
during normal operation.
FIELD REPLACEABLE DRIVER: Solid state electronic
constant current driver with a high power factor provided
standard. Specify 120V or 277V. Driver complies with IEEE
C62.41 surge protection.
DIMMING OPTIONS: Multiple dimming drivers available.
See compatibility chart attached. Some on-time delay
may be experienced depending on control system used.
1-2 head fixtures are 40W or less; 3-4 head fixtures are
40W-80W. Note: DIML2 dimming drivers source current
FIELD REPLACEABLE LIGHT ENGINE: Available in
14W (750 delivered lumens) and 20W (975 delivered lumens) varies by fixture: 1 head = 2mA, 2 head = 4mA, 3 head =
6mA and 4 head = 8mA. DIML6 drivers source 2mA in all
per head. Engine is field replaceable through the aperture
cases. NOTE: When specifying the DIML7 DALI driver,
with phillips screwdriver.
individual dimming control of each head is possible
COLOR: NanoLED Multi with Crisp White technology is
with 3-head and 4-head fixtures through controls
available in a 3000K color temperature, 90+ color rendering commissioning. However, individual addressing of each
index light engine. All Crisp White light engines are tightly
head in 2-headed fixtures is only available through a fixture
binned for fixture-to-fixture color consistency within a
modification; please consult the factory if your application
2-Step MacAdam Ellipse.
requires individual head control for LNML2 or LNMT2.
RATED LIFE: Based on IESNA LM80-2008 50,000 hours at
EMERGENCY: Emergency lighting battery pack with
70% lumen maintenance (L70).
remote test switch is serviceable through the aperture.
Bodine battery provides 260mA for 90 minutes; delivers
~325 lumens through one head only . EMLW wet location
option also available.
ADJUSTMENT: Adjustable hot aiming with a completely
toolless and lockable 40° x 40° dual-axis gimbal tilt
mechanism.
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
MOUNTING: Butterfly brackets and adjustable
nailer bars with integral nails provided. Nailer bars
are extendible from 14" to 24" centers.
HOUSING: Fabricated of 20 ga. black powder coated
steel with thru wire J-box, 2 in 2 out at min. 90°C,
#12 AWG thru branch circuit wiring.
ACCESSORY HOLDER: 360° rotating, "D" size
accessory holder. Accessory holder accomodates
two lenses maximum, including the lens provided
with the fixture optic.
MAXIMUM CEILING THICKNESS: As per drawings
above.
CEILING CUT OUT: LNMT1 (1 lamp) : 61/8" x 61/8"
LNMT2 (2 lamp) : 61/8" x 115/8"
LNMT3 (3 lamp) : 61/8" x 171/8"
LNMT4 (4 lamp) : 61/8" x 223/4"
LISTINGS: Dry/Damp/Wet. NRTL/CSA-US tested to
UL Standards. IBEW Union made.
WARRANTY: 5 years
NOTES:
• Interior use only.
PHOTOMETRICS: Consult factory or website for IES
files. Tested in accordance with IESNA LM79-2008.
© 2015. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 10/13/2015
®
CRISP WHITE
ADJUSTABLE
Multi CRISP WHITE
LNMT
DELIVERED PERFORMANCE
LNMT 14W 30KH 25°
LNMT 20W 30KH 25°
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2015. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 10/13/2015
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML2
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
DIML2 LED: 0-10V Dimming Driver Wiring (Dims down to 10%)
DIML2 Dimmer Compatibility Chart
Manufacturer
120V / 277V
Crestron
Crestron
Crestron
Crestron
Crestron
Leviton
Lightolier (Philips)
Lutron
Product
Part Number
Dimmed Light
Output Range
iLux dimmer expansion module
DIN Rail dimmer
DIN Rail analog output module
8 Channel dimmer module
8 Channel dimmer module
IllumaTech dimmer
Vega
Diva
CLS-EXP-DIMFLV
DIN-4DIMFLV4
DIN-A08
GLX-DIMFLV8
GLXP-DIMFLV8
IP710-DLX
V2000FAMU
DVTV-XX
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
Qty Fixtures
Per Dimmer*
Use source current per
fixture specification
sheet to determine
number of fixtures per
dimmer. Max number
of fixtures is limited by
dimmer load rating.
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
DIML2
0-10V DIMMING W/RELAY TO SWITCH POWER
FIXTURE
DIMMER: 0-10V
(BY OTHERS)
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
NOTE:
If switched, non-dimming operation is desired,
cap off purple and gray wires individually at
installation. Do NOT cap purple and gray wires
together.
GREEN
GND
CLASS 2 CONTROL WIRES
LINE
RELAY
(BY OTHERS)
NEUTRAL
DIMMER: 0-10V w/
POWER SWITCHING
DIML2
0-10V DIMMING (NO RELAY)
FIXTURE
(BY OTHERS)
LINE
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
NOTE:
If switched, non-dimming operation is desired,
cap off purple and gray wires individually at
installation. Do NOT cap purple and gray wires
together.
GREEN
GROUND
GND
NEUTRAL
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-2 Revised 02/15/2016
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML3
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
DIML3 LED: Lutron Hi-Lume A-Series 2 Wire Fwd Phase (with neutral) / LED Dimming Driver Wiring (Dims down to 1%) 120V only.
DIML3 Dimmer Compatibility Chart
Manufacturer
120V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Product
Part Number
Dimmed Light
Output Range
Sensor+ Cabinet
Unison DRd Cabinet
Maestro Wireless® 600W dimmer
Maestro Wireless® 1000W dimmer
HomeWorks® QS adaptive dimmer
HomeWorks® QS 600W dimmer
HomeWorks® QS 1000 W dimmer
Caseta Wireless® Pro 1000W dimmer
Stanza® dimmer
RadioRA® 2 adaptive dimmer
RadioRA® 2 1000 W dimmer
myRoom DIN power module
HomeWorks® QS wallbox power module
Homeworks® DIN power module
HomeWorks® wallbox power module
GRAFIK Eye® QS control unit
GRAFIK Eye® 3000 control unit
RPM-4U module
RPM-4A module
GP dimming panels
Ariadni CL 250W dimmer
Diva CL 250W dimmer
Grafik T CL or RF CL dimmer
Nova T CL 250W dimmer
ELV10
ELV10
MRF2-6ND-120MRF2-10ND-120HQRD-6NAHQRD-6NDHQRD-10NDPD-10NXDSZ-6NDRRD-6NARRD-10NDMQSE-4A1-D
HQRJ-WPM-6D-120LQSE-4A1-D
HWI-WPM-6D-120
QSGR-, QSGRJGRX-3100-, GRX-3500HW-RPM-4U-120, LP-RPM-4U-120
HW-RPM-4A-120, LP-RPM-4A-120
Various
AYCL-253PDVCL-253P-, DVSCCL-253PGT-250M-, GTJ-250MNTCL-250-
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100%-1%
100%-1%
100%-1%
100%-1%
Qty Fixtures Per Dimmer*
Fixture Wattage
39W and Less 40W - 80W
1 – 26
1 – 13
1 – 26
1 – 13
1–8
1–4
1 – 13
1–6
1–8
1–4
1–8
1–4
1 – 13
1–6
1 – 13
1–6
1–8
1–4
1–8
1–4
1–6
1–3
1–6
1–3
1 – 26
1 – 13
1–6
1–3
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1–8
1–4
1–8
1–4
1–8
1–4
1 – 10
1–5
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
DIML3
2 WIRE PHASE DIMMING
FIXTURE
DIMMER: 2 WIRE PHASE
(BY OTHERS)
LED
LINE
SWITCHED HOT
NEUTRAL
GROUND
BLACK
WHITE
DRIVER
V+
RED
V-
BLACK
GREEN
GND
ONLY FOR SWITCHES WITH NEUTRAL
NEUTRAL
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-3 Revised 02/15/2016
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML4
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%)
DIML4 3-Wire Dimmer Compatibility Chart
Manufacturer
120V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
277V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Product
Part Number
Dimmed Light
Output Range
Sensor+ Cabinet
Unison DRd Cabinet
Nova T
Nova T
Nova
Nova
Vareo
Skylark
Diva
Ariadni
Vierti
Maestro
Maestro Wireless
RadioRA 2
HomeWorks QS
Interfaces
GP Dimming Panels
D20 Dimming module
D20F Dimming module
NTF-10NTF-103PNF-10NF-103PVF-10SF-10P-, SF-103PDVF-103P-, DVSCF-103PAYF-103PVTF-6AMAF-6AM-, MSCF-6AMMRF2-F6AN-DVRRD-F6AN-DVHQRD-F6AN-DV
PHPM-3F-120, PHPM-3F-DV
Various
100% - 1%
100% - 1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
Sensor+ Cabinet
Unison DRd Cabinet
Nova T
Nova T
Nova
Nova
Skylark
Diva
Ariadni
Vierti
Maestro
Maestro Wireless
RadioRA 2
HomeWorks QS
Interfaces
GP Dimming Panels
D20 Dimming module
D20F Dimming module
NTF-10-277NTF-103P-277NF-10-277NF-103P-277SF-12P-277-, SF-12P-277-3
DVF-103P-277-, DVSCF-103P-277AYF-103P-277VTF-6AMAF-6AM-277-, MSCF-6AM-277MRF2-F6AN-DVRRD-F6AN-DVHQRD-F6AN-DV
PHPM-3F-DV
Various
100% - 1%
100% - 1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
Qty Fixtures Per Control*
Fixture Wattage
39W and Less 40W - 80W
1–53
1–26
1–53
1–26
1–41
1 – 20
1–20
1 – 10
1–41
1 – 20
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–15
1–7
1–15
1–7
1–15
1–7
1–15
1–7
1–15
1–7
1–41
1 – 20
1–41
1 – 20
40W and Less 41W - 80W
1–53
1–26
1–53
1–26
1–44
1 – 22
1–33
1 – 16
1–44
1 – 22
1–33
1 – 16
1–33
1 – 16
1–33
1 – 16
1–44
1 – 22
1–33
1 – 16
1–20
1 – 10
1–33
1 – 16
1–33
1 – 16
1–33
1 – 16
1–88
1 – 44
1–88
1 – 44
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's
documentation for installation instructions and circuit details.
DIML4 wiring diagrams continued on next page
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-4 Revised 02/15/2016
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML4 Continued
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%)
DIML4
3 WIRE PHASE DIMMING
FIXTURE
DIMMER: 3 WIRE PHASE
(BY OTHERS)
CAP UNUSED
ECOSYS WIRES
DIMMED HOT
SWITCHED HOT
NEUTRAL
LINE
LED
PURPLE GRAY
PURPLE
ORANGE
BLACK
WHITE
GREEN
GROUND
DRIVER
V+
RED
V-
BLACK
GND
NEUTRAL
DIML4 LED: Lutron Hi-Lume A-Series LED Driver with EcoSystem Control / LED Dimming Driver Wiring (Dims down to 1%)
Manufacturer
120V / 277V
Lutron
Lutron
Lutron
Lutron
DIML4 EcoSystem Dimmer Compatibility Chart
Dimmed Light
Part Number
Output Range
Product
PowPak dimming module
Energi Savr Node
GRAFIK Eye QS (120V ONLY)
Quantum
RMJ-ECO32-DV-B
QSN-1ECO-S, QSN-2ECO-S
QSGRJ-_E, QSGR-_E
Various
100%–1%
100%–1%
100%–1%
100%–1%
Qty Fixtures Per Control*
Fixture Wattage
39W and Less 40W - 80W
1–32
1 – 16
1–64
1 – 32
1–64
1 – 32
1–64
1 – 32
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's
documentation for installation instructions and circuit details.
DIML4
EcoSystem CONTROLS
ECOSYS BUS
E2
E1
E2
FIXTURE
E1
WALL CONTROL
(BY OTHERS)
LINE
NEUTRAL
CAP
UN-USED
ORANGE
WIRE
PURPLE GRAY
PURPLE
ORANGE
BLACK
WHITE
GREEN
LED
DRIVER
V+
RED
V-
BLACK
GND
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-4 Revised 02/15/2016
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML6A, 6E
DIML6B, 6F
®
USAI
Lighting
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
DIML6A and DIML6E LED Dimming Compatibility Table
DIML6A and DIML6E are linearly programmed dimming drivers for use with logarithmic-style dimming controls (e.g., Lutron and others listed in the table below)
DIML6A = EldoLED SOLOdrive 0-10V control dims from 100% to 0.1%
DIML6E = EldoLED ECOdrive 0-10V control dims from 100% to 1%
Dimmed Light Qty Fixtures
Manufacturer Product
Part Number
Output Range Per Dimmer*
Refer to manufacturer's
120V & 277V
DIML6A / E
Lutron
Diva
DVTV/NFTV/NTFTV with PP-20
99% - 0.1% / 1% dimmer load rating for
Lutron
Energi Savr Node
QSN-4T16-S
100% - 0.1% / 1% maximum and minimum
Lutron
GP Dimming Panels TVM2 Module
99% - 0.1% / 1% fixture quantities per
Lutron
Interfaces
GRX-TVI w/ GRX3503
100% - 0.1% / 1% dimmer.
Sensor Switch nIO
nIO EZ
100% - 0.1% / 1%
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
DIML6B and DIML6F LED Dimming Compatibility Table
DIML6B and DIML6F are logarithmic-programmed dimming drivers for use with linear-style dimming controls (e.g., Crestron, non-Lutron and others listed in the table below)
DIML6B = EldoLED SOLOdrive 0-10V control dims from 100% to 0.1%
DIMMER: 0-10V
DIML6F = EldoLED ECOdrive
(BY OTHERS) 0-10V control dims from 100% to 1%
0-10V (-)
GRAY
0-10V (+)
PURPLE
LED
DIML6B Dimmer Compatibility Chart
Dimmed Light
Qty Fixtures
V+
RED
SWITCHED HOT
SWITCHED
HOTNumber DRIVER
Manufacturer
Product
Part
Output Range
Per Dimmer*
VBLACK
NEUTRAL
WHITE
Refer to
120V & 277V
DIML6B / F
GREEN 2112U-101
Bush-Jaeger
Electronic potentiometer
100% - 0.1% / 1% manufacturer's
Jung
Electronic potentiometer
100% - 0.1% / 1% dimmer load
GND 240-10
CLASS 2 CONTROL WIRES
Leviton
IllumaTech dimmer
IP710-DLX
100% - 0.1% / 1% rating for
LINE
Lightolier
(Philips) Momentum (120V ONLY)
ZP600FAM120
100% - 0.1% / 1% maximum and
RELAY
Merten
Electronic
potentiometer
5729
100% - 0.1% / 1% minimum fixture
(BY OTHERS)
DIML6A,
6B
Pass & Seymour Titan
CD4FB-W
100% - 0.1% / 1% quantities per
NEUTRAL
TO SWITCH POWER
Watt Stopper
Miro 0-10V DIMMING W/RELAY
DCLV1
100% - 0.1% / 1% dimmer.
Synergy
Wallbox Dimmers
ISD BC
100% - 0.1% / 1%
ABB
i-bus
SD/S 2.16.1
100% - 0.1% / 1%
Crestron
Modules
GLX-DIMFLV8, GLXP-DIMFLV8
100% - 0.1% / 1%
Crestron
Green Light
GLPAC-DIMFLV4-, GLPAC-DIMFLV8100% - 0.1% / 1%
DIML6A, 6B
0-10V (-)
Crestron
Green Light Power Pack
GLPP-DIMFLVEX-PM, GLPP-1DIMFLV2EX-PM,
GLPP-1DIMFLV3EX-PM
100% - 0.1% /FIXTURE
1%
0-10V DIMMING
W/RELAY TO GRAY
SWITCH POWER
0-10V (+)
PURPLE
DIMMER: 0-10V
Crestron
DIN Rail Analog Output Module
DIN-A08
100% - 0.1% / 1% V+ RED
SWITCHED HOT
BLACK
Crestron
DIN Rail 0-10V Fluorescent Dimmer
DIN-4DIMFLV4
100% - 0.1% / 1% LEDV- BLACK
NEUTRAL
WHITE
GREEN
Crestron
iLux 0-10V Dimmer Expansion Module CLS-EXP-DIMFLV
100% - 0.1% / 1%
DRIVER
GND
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions andCLASS
circuit
details.
2 CONTROL WIRES
(BY OTHERS)
LINE
DIMMING DRIVER WIRING SCHEMES:
RELAY
(BY OTHERS)
NOTES:
NEUTRAL
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
DIML6
0-10V DIMMING (NO RELAY)
DIML6
0-10V DIMMING W/RELAY TO SWITCH POWER
FIXTURE
(BY OTHERS)
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
(BY OTHERS)
LED
DRIVER
V+
RED
V-
BLACK
LINE
GREEN
GROUND
GND
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
GREEN
GND
CLASS 2 CONTROL WIRES
LINE
FIXTURE
DIMMER: 0-10V w/
POWER SWITCHING
DIMMER: 0-10V
RELAY
(BY OTHERS)
NEUTRAL
NEUTRAL
USAI
Lighting
®
www.usailighting.com
DIML6A, 6B
info@usailighting.com
1126 River Road
New Windsor, NY 12553
0-10V DIMMING (NO RELAY)
DIMMER: 0-10V w/
POWER SWITCHING
(BY OTHERS)
FIXTURE
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-6 Revised 05/20/2016
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML7
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
DIML7 LED: EldoLED DALI Dimming Driver Wiring (Dims down to 0.1%)
DIML7
DALI CONTROLS
DALI BUS
DA
DA
FIXTURE
WALL CONTROL
(BY OTHERS)
LINE
NEUTRAL
LED
ORANGE (-)
ORANGE/WHITE (+)
BLACK
WHITE
GREEN
DRIVER
V+
RED
V-
BLACK
GND
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-7 Revised 02/15/2016
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML8
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
DIML8 LED: EldoLED DMX Dimming Driver Wiring (Dims down to 0.1%)
DMX BUS - XLR CABLE OR
SHIELDED DATA CABLE
The data cable used must meet the following requirements:
• type: shielded, 2-conductor twisted pair
• maximum capacitance between conductors: 30 pF/ft
• maximum capacitance between conductor and shield: 55 pF/ft
• maximum resistance: 0.02 ohms/ft
• normal impedance: 100-140 ohms
• conductive core: 24 AWG is recommended
If 3-wire data cables are preferred, we suggest a Belden 9841 or equivalent cable which meets
the specifications for EIA RS-485 applications. Do not use standard microphone cables: they
cannot transmit DMX512 data reliably over long distances. NOTE: DMX link termination device
(by others) should be used on last fixture in line on a circuit to avoid signal loss.
DMX BUS - XLR CABLE OR
SHIELDED DATA CABLE
SHIELD
DMX (-)
DMX (+)
5 PIN XLR JACKS STANDARD
8 BIT DMX 512
CONTROLLER
(BY OTHERS)
LINE
NEUTRAL
RED
BLACK
BARE
BLACK
WHITE
GREEN
LED
DRIVER
V+
RED
V-
BLACK
GND
FIXTURE
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-8 Revised 02/15/2016
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML10
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
DIML10 LED: ELV Reverse Phase Dimming Driver Wiring (Dims down to 15%) 120V Only
DIML10
2 WIRE PHASE DIMMING
FIXTURE
DIMMER: 2 WIRE PHASE
(BY OTHERS)
LED
LINE
SWITCHED HOT
NEUTRAL
GROUND
BLACK
WHITE
DRIVER
V+
RED
V-
BLACK
GREEN
GND
ONLY FOR SWITCHES WITH NEUTRAL
NEUTRAL
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-10 Revised 02/15/2016