Wiremold Pathways
A
FLOOR BOXES
/V
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
Evolution Series
™
EFB6S Series
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Crestron® QuickMedia &
Digital Media Wall Plate
Devices,
Extron® AAP, MAAP, &
Decorator,
Ortronics® Series II
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 3/4"-1 1/4" Trade Size
Installation: On-Grade, Above-Grade, Raised
Floors and Wood Floors
Floor Depth: 4 1/16"
Capacity: 6 Gangs
Depth Behind Plates: 3 3/4"
Fire Classified Version: Available
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Crestron® QuickMedia &
Digital Media Wall Plate
Devices,
Extron® AAP, MAAP, &
Decorator,
Ortronics® Series II
EFB10S Series
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Crestron® QuickMedia &
Digital Media Wall Plate
Devices,
Extron® AAP, MAAP, &
Decorator,
Ortronics® Series II
EFB-MAAP – Device Plate
w/GFCI or decorator
style opening for open A/V
devices such as Legrand
AVIP or Extron® Electronics,
Crestron® and Atinex® Intera.
EFB-AAP –
Device Plate w/Extron®
Electronics AAP opening.
EFB-MAAP – Device Plate
w/GFCI or decorator
style opening for open A/V
devices such as Legrand
AVIP or Extron® Electronics,
Crestron® and Atinex® Intera.
EFB10-DEC –
For use with decorator style
GFCI and A/V devices.
EFB10-MAAP –
Device Plate holds 4
Legrand AVIP or Extron®
Electronics MAAP devices.
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold Open
System CM2 Series accepts Avaya/Systimax,
Keystone & Nordx
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 3/4"-2" Trade Size
Installation: On-Grade, Above-Grade, Raised
Floors and Wood Floors
Floor Depth: 6"
Capacity: 8 Gangs
Depth Behind Plates: 3 1/2"
Fire Classified Version: Available
EFB8S Series
EFB-AAP –
Device Plate w/Extron®
Electronics AAP opening.
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
Communications Compatibility:
Ortronics® Series II & TracJack,
Wiremold Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 3/4"-2" Trade Size
Installation: On-Grade, Above-Grade, Raised
Floors and Wood Floors
Floor Depth: 6"
Capacity: 8 Gangs
Depth Behind Plates: 3 1/2"
Fire Classified Version: Available
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold Open
System CM2 Series accepts Avaya/Systimax,
Keystone & Nordx
EFB10-AAP –
Device Plate holds 2 Extron®
Electronics AAP devices.
NOTE: Wiremold manufactures many additional pathway solutions. Those represented here have been
designed/modified to provide the depth behind the plate required for most A/V devices.
For additional design and installation considerations, please contact the factory.
ED1596R3 – Updated November 2011 – For latest specs visit www.legrand.us/wiremold
FLOOR BOXES
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
Resource RFB Series
®
RFB2 Series
A/V Compatibility:
Legrand AVIP,
Altinex® Intera, Extron® AAP,
MAAP & Decorator,
Ortronics® Series II
RFB4 Series
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Extron® AAP, MAAP, &
Decorator,
Ortronics® Series II
RFB4E Series
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Extron® AAP & MAAP,
Ortronics® Series II
RFB6, RFB6E Series
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 3/4"-1 1/4" Trade Size
Installation: On-Grade & Above-Grade
Floor Depth: 2 1/2"-3 1/2"
Capacity: 2 Gangs
Depth Behind Plates: 3"
Fire Classified Version: Available
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
RFB2-AAP –
Device Plate w/Extron®
Electronics AAP opening.
RFB2GFI – Device Plate
w/GFCI or decorator
style opening for open A/V
devices such as Extron®
Electronics, Crestron® and
Atinex® Intera.
RFB2EXT –
Device Plate w/Legrand
AVIP or Extron® Electronics
MAAP opening.
RFB2RT – Device Plate
w/bracket that accepts
Ortronics® Series II Devices.
RFB4-SS-MAAP –
Shallow Device Plate
w/Legrand AVIP or Extron®
Electronics MAAP opening.
RFB4-SS-AAP –
Shallow Device Plate
w/Extron® Electronics
AAP opening.
RFB4-GFI-4DB – Device
Plate w/GFCI or decorator
style opening for open A/V
devices such as Extron®
Electronics, Crestron® and
Atinex® Intera.
WTB-MAAP – Device Plate
w/Legrand AVIP or Extron®
Electronics MAAP opening.
WTB-AAP – Device Plate
w/Extron® Electronics
AAP opening.
RFB-GFI-SS – Shallow
Device Plate w/GFCI or
decorator style opening for
open A/V devices such as
Extron® Electronics,
Crestron® and Atinex® Intera.
RFB6-AAP – Device Plate
w/ Extron® Electronics
AAP opening.
RFB6GFI – Device Plate
w/GFCI or decorator style
opening for open A/V devices
such as Extron® Electronics,
Crestron® and
Atinex® Intera.
RFB6EXT – Device Plate
accepts three (3) Legrand
AVIP or Extron® Electronics
MAAP Devices.
RFB6RT – Device Plate
w/adapter to accept two (2)
Ortronics® Series II Devices.
RFB6-AAP – Device Plate
w/ Extron® Electronics
AAP opening.
RFB6GFI – Device Plate
w/GFCI or decorator style
opening for open A/V devices
such as Extron® Electronics,
Crestron® and
Atinex® Intera.
RFB6EXT – Device Plate
accepts three (3) Legrand
AVIP or Extron® Electronics
MAAP Devices.
RFB6RT – Device Plate
w/adapter to accept two (2)
Ortronics® Series II Devices.
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold Open
System CM2 Series accepts Avaya/Systimax,
Keystone & Nordx
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 3/4"-1 1/4" Trade Size
Installation: On-Grade & Above-Grade
Floor Depth: 2 1/2"-3 1/2"
Capacity: 4 Gangs
Depth Behind Plates: 2"
Fire Classified Version: Available
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
Communications Compatibility:
Ortronics® Series II & TracJack,
Wiremold Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 3/4"-2" Trade Size
Installation: On-Grade & Above-Grade
Floor Depth: 3 1/2"
Capacity: 6 Gangs
Depth Behind Plates: 3 1/2"
Fire Classified Version: Not Available
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 3/4"-1 1/4" Trade Size
Installation: On-Grade & Above-Grade
Floor Depth: 3 1/2"
Capacity: 6 Gangs
Depth Behind Plates: 3 1/4"
Fire Classified Version: Not Available
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Extron® AAP & MAAP,
Ortronics® Series II
NOTE: Wiremold manufactures many additional pathway solutions. Those represented here have been
designed/modified to provide the depth behind the plate required for most A/V devices.
For additional design and installation considerations, please contact the factory.
2
FLOOR BOXES
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
Resource RFB® Series
RFB9 & RFB11 Series
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Crestron® QuickMedia &
Digital Media Wall Plate
Devices,
Extron® AAP, MAAP, &
Decorator,
Ortronics® Series II
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 3/4"-2" Trade Size
Installation: On-Grade & Above-Grade
Floor Depth: 4"-6"
Capacity: 9-11 Gangs
Depth Behind Plates: 2 1/2"
Fire Classified Version: Not Available
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator, 30A
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
RFB119-GFI – Device Plate
w/GFCI or decorator style opening
for open A/V devices such as
Extron® Electronics, Crestron® and
Atinex® Intera.
RFB119-3GFI – Device
Plate w/three (3) GFCI or
decorator style openings
for open A/V devices such
as Extron® Electronics,
Crestron® and Atinex®
Intera.
RFB119-XLR – Device Plate
with two (2) openings to accept
microphone devices.
RFB119-SXLR – Device Plate
with two (2) openings to
accept microphone devices.
RFB119-SGFI – Device Plate
w/GFCI or decorator style opening
for open A/V devices such as
Extron® Electronics, Crestron® and
Atinex® Intera.
OmniBox™ Series
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 1/2"-3/4" Trade Size
Installation: On-Grade & Above-Grade
Floor Depth: 3 1/4"-4 1/2"
Box Type: Stamped Steel & Cast Iron
Depth Behind Plates: 2 3/4"
Fire Classified Version: Available
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Extron® MAAP & Decorator,
Ortronics® Series II
828-MAAP – Device Plate for
mounting Legrand AVIP or
Extron® Electronics MAAP
Devices using 828GFI Covers.
For use with 828GFITC or
828GFITCAL Cover Plates
(sold separately).
Power Compatibility:
15A & 20A Duplex, 20A & 30 A Locking, GFCI
Communications Compatibility:
Ortronics® Series II & TracJack, Pass &
Seymour® Activate, Wiremold Open System
CM2 Series accepts Avaya/Systimax,
Keystone & Nordx
880W Series™
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 1/2"-3/4" Trade Size
Floor Type: Wood
Capacity: One- to Three-Gangs
Depth Behind Plates: 2 3/4"
Fire Classified Version: Not Available
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Crestron® QuickMedia Wall
Plate Device,
Extron® MAAP & Decorator,
Ortronics® Series II
828-MAAP – Device Plate for
mounting Legrand AVIP or
Extron® Electronics MAAP
Devices using 828GFI Covers.
For use with 828GFITC or
828GFITCAL Cover Plates
(sold separately).
Power Compatibility:
15A & 20A Duplex, 20A & 30 A Locking, GFCI
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
Ratchet-Pro™ Series
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 1" Trade Size
Installation: On-Grade & Above-Grade
Floor Depth: Up to 6"
Capacity: Single Gang
Depth Behind Plates: 1 3/4"
Fire Classified Version: Available
881AV3CTCGY
881AV3CTCBK
881AV3CTCAL
881AV3CTCBS
Floor Box Cover Kit with Legrand
AVIP or Extron® Electronics MAAP
and Ortronics® Series II Adapters.
881AMD8CTCGY
881AMD8CTCBK
881AMD8CTCAL
881AMD8CTCBS
Floor Box Cover Kit with
Ortronics® Series II Adapters.
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Extron® MAAP,
Ortronics® Series II
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
NOTE: Wiremold manufactures many additional pathway solutions. Those represented here have been
designed/modified to provide the depth behind the plate required for most A/V devices.
For additional design and installation considerations, please contact the factory.
3
RAISED
FLOOR BOXES
FloorSource AF Series
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
™
AF-1, AF-3
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Crestron® QuickMedia Wall
Plate Device,
Extron® AAP, MAAP &
Decorator,
Ortronics® Series II
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 1/2" & 3/4" Trade Size
Floor Type: Raised
Min. Floor Depth: 5"
Depth Behind Plates: 2 3/4" with Back Plate
installed
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
SGT-MAAP – Device Plate
w/Legrand AVIP or Extron®
Electronics MAAP opening.
DGT-RT – Device Plate includes
one (1) Ortronics® Series II Adapter.
SGT-3S2 – Device Plate accepts
three (3) Ortronics® Series II Devices.
SGB-MAAP – Device Plate
w/Legrand AVIP orExtron® Electronics
MAAP opening.
DGT-MAAP – Device Plate
w/Legrand AVIP or Extron® Electronics
MAAP opening.
SGB-3S2 – Device Plate accepts
three (3) Ortronics® Series II Devices.
DGT-AAP – Device Plate w/Extron®
Electronics AAP opening.
FloorSource AF Series™
SAF
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 1/2" & 3/4" Trade Size
Floor Type: Raised
Min. Floor Depth: 2 1/2"
Depth Behind Plates: 1 3/4" with Back Plate
installed
SGC2-MAAP – Device
Plate accepts two (2)
Legrand AVIP or Extron®
Electronics MAAP Devices.
SGC2-RT – Device Plate
with Adapter that accepts
one (1) Ortronics®
Series II Device.
C8005P-MAAP-6A– Device
Plate w/Legrand AVIP or
Extron® Electronics MAAP
opening.
C10105P-MAAP-6A –
Device Plate w/Extron®
Electronics MAAP opening.
C8005P-AAP-6A – Device
Plate w/Extron® Electronics
AAP opening.
C10105P-AAP-6A –
Device Plate w/Extron®
Electronics AAP opening.
Power Compatibility:
15A & 20A Duplex
A/V Compatibility:
Legrand AVIP,
Extron® MAAP,
Ortronics® Series II
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
FloorSource AC Series™
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 1/2" & 3/4" Trade Size
Floor Type: Raised
Min. Floor Depth: 5"
Depth Behind Plates: 2" with Back Plate installed
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Extron® AAP, MAAP &
Decorator,
Ortronics® Series II
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold Open
System CM2 Series accepts Avaya/Systimax,
Keystone & Nordx
C8005P-RT
C8005P-2RT
C8005P-3RT
Device Plate w/Adapters
for one (1), two (2), or
three (3) Ortronics®
Series II Devices.
C10105P-3RT –
Device Plate w/Adapters
for three (3) Ortronics®
Series II Devices.
C8004P-2RT – Device Plate
w/Adapters for two (2)
Ortronics® Series II Devices.
NOTE: Wiremold manufactures many additional pathway solutions. Those represented here have been
designed/modified to provide the depth behind the plate required for most A/V devices.
For additional design and installation considerations, please contact the factory.
4
RAISED
FLOOR BOXES
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
FloorSource CRFB Series
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 1/2"-2" Trade Size
Floor Type: Raised
Min. Floor Depth: 7"
Depth Behind Plates: 2 1/4" with Back Plate
installed
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Extron® AAP, MAAP &
Decorator,
Ortronics® Series II
POKE-THRU
DEVICES
A/V PART NUMBER(S) & LINE ART
™
Power Compatibility:
15A & 20A Duplex, GFCI, 30A Receptacles
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold Open
System CM2 Series accepts Avaya/Systimax,
Keystone & Nordx
CRFB-MAAP-4 – Device
Plate w/Legrand AVIP or
Extron® Electronics MAAP
opening.
CRFB-GFI-1 – Device Plate
w/standard GFCI or
decorator style opening for
open A/V devices such as
Extron® Electronics,
Crestron® and Atinex® Intera.
CRFB-GFI-2 – Device Plate
w/standard GFCI or
decorator style opening for
open A/V devices such as
Extron® Electronics,
Crestron® and Atinex® Intera.
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
CRFB-GFI-3 – Device Plate
w/standard GFCI or
decorator style opening for
open A/V devices such as
Extron® Electronics,
Crestron® and Atinex® Intera.
CRFB-BEZ-6A-4 – Device
Plate w/Adapter for one (1)
Ortronics® Series II Device.
CRFB-CGFI-4 – Device Plate
w/standard GFCI or
decorator style opening for
open A/V devices such as
Extron® Electronics, Crestron®
and Atinex® Intera.
A/V PART NUMBER(S) & LINE ART
Evolution Series Poke-Thru Devices
™
6AT Series
A/V Compatibility:
Legrand AVIP, Altinex®
Intera, Crestron®
QuickMedia Wall Plate
Device, Extron® AAP &
MAAP, Ortronics® Series II
8AT Series
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 3/4"-2"
Depth Behind Plates: 3 1/2"
6AAP – Device Plate accepts
two (2) Extron® Electronics
AAP Devices.
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator,
20A Single Receptacle
6MAAP – Device Plate
accepts six (6) Legrand
AVIP or Extron® Electronics
MAAP Devices.
6MAAP-2A – Device Plate
accepts three (3) Legrand
AVIP or Extron®
Electronics MAAP
Devices and up to two (2)
ports for communication
devices.
Communications Compatibility:
Ortronics® Series II, TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 3/4"-2"
Depth Behind Plates: 3 1/2"
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator, 20A
Single Receptacle
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Crestron® QuickMedia Wall
Plate Device,
Extron® AAP & MAAP,
Ortronics® Series II
Communications Compatibility:
Ortronics® Series II, TracJack, Wiremold Open
System CM2 Series accepts Avaya/Systimax,
Keystone & Nordx
8CREST – Device Plate
accepts Crestron® & Extron®
Electronics double gang
decorator style devices.
8CREST3G – 3 gang device
plate accepts Crestron® &
Extron® Electronics triple
gang decorator style
devices.
8AAP – Device Plate
accepts four (4) Extron®
Electronics AAP Devices.
6DEC – Device Plate
accepts standard GFCI or
decorator style opening for
open A/V devices such as
Extron® Electronics,
Crestron® and Atinex® Intera.
6SER – Device Plate
accepts up to four (4)
Ortronics® Series II
modular inserts.
68MAAP – Device Plate
accepts up to two (2)
Legrand AVIP or Extron®
Electronics MAAP Devices.
8DEC – Device Plate with
standard GFCI or decorator
style opening for open A/V
devices such as Extron®
Electronics, Crestron® and
Atinex® Intera.
8SER – Device Plate
accepts up to three (3)
Ortronics® Series II
modular inserts.
68MAAP – Device Plate
accepts up to two (2)
Legrand AVIP or Extron®
Electronics MAAP Devices.
8MAAP – Device Plate
accepts four (4) Legrand
AVIP or Extron® Electronics
MAAP Devices.
NOTE: Wiremold manufactures many additional pathway solutions. Those represented here have been
designed/modified to provide the depth behind the plate required for most A/V devices.
For additional design and installation considerations, please contact the factory.
5
POKE-THRU
DEVICES
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
AV3 Series™ Poke-Thru Devices
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 3/4"-1 1/4"
KO Size(s): 3/4"-1 1/4"
Depth Behind Plates: 1 1/4"
Power Compatibility:
20A Duplex Proprietary
A/V Compatibility:
Legrand AVIP,
Extron® MAAP,
Ortronics® Series II
AV3ATCGY
AV3ATCBK
AV3ATCAL
AV3ATCAA
AV3ATCBS
AV3ATCAB
AV3ATCVY
Assembled Poke-Thru
Device that includes
bezels to accepts one
Legrand AVIP or Extron®
Electronics MAAP device
or one Ortronics® Series
II insert.
AV3CTCGY
AV3CTCBK
AV3CTCAL
AV3CTCAA
AV3CTCBS
AV3CTCAB
AV3CTCVY
Assembled Poke-Thru
Device that includes
bezels to accepts one
Legrand AVIP or Extron®
Electronics MAAP device
or one Ortronics® Series
II insert.
Communications Compatibility:
Ortronics® Series II, TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
AMD8 Series™ Poke-Thru Devices
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 3/4"-1 1/4"
Depth Behind Plates: 1 1/4"
Communications Compatibility:
Ortronics® Series II, TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
AMD8ATCGY
AMD8ATCBK
AMD8ATCAL
AMD8ATCAA
AMD8ATCBS
AMD8ATCAB
AMD8ATCVY
Assembled PokeThru Device that
includes bezels
to accept four (4)
Ortronics® Series
II inserts.
RC9AMD Series™ Poke-Thru Devices
INSTALLATION CONSIDERATIONS:
Infeed Conduit Size: 2"
Depth Behind Plates: 2"
Communications Compatibility:
Ortronics® Series II, TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
WORK SURFACE
SOLUTIONS
RC9AMDTCGY
RC9AMDTCBK
RC9AMDTCAL
RC9AMDTCBS
RC9AMDTCAB
RC9AMDTCVY
RC9AMDTCAA
Assembled
Poke-Thru
Device that
includes bezels
to accept two
(2) Ortronics®
Series II inserts.
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
dequorum Work Surface Portals
™
INSTALLATION CONSIDERATIONS:
Power Feeds: Cord Ended or Hard Wired
Dimensions: 3 3/8"D x 7 7/8"L x 5 1/8"W
Depth Behind Plates: 1 1/4" With Back Plate
Installed
Power Compatibility:
15A or 20A Receptacles Pre-loaded
A/V Compatibility:
Legrand AVIP,
Extron® AAP & MAAP,
Ortronics® Series II
KA305-AAP – Device Plate
w/Legrand AVIP or Extron®
Electronics AAP Opening.
KA302 – Device Plate holds
cables captive for easy
access when active jacks
are not needed.
KA305 – Device Plate
w/Legrand AVIP or Extron®
Electronics MAAP Opening.
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
NOTE: Wiremold manufactures many additional pathway solutions. Those represented here have been
designed/modified to provide the depth behind the plate required for most A/V devices.
For additional design and installation considerations, please contact the factory.
6
WORK SURFACE
SOLUTIONS
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
Evolution Series Work Surface Portals
™
WSF6 Series
INSTALLATION CONSIDERATIONS:
Power Feeds: Cord Ended
Dimensions: 6" or 8" Diameter
Depth Behind Plates: 3 1/2"
Power Compatibility:
Four Single 20A Proprietary
Communications Compatibility:
Ortronics® Cat 6 RJ45 Keystone
CORD-ENDED
WS6FNK, WS6FBS,
WS6FGY, WS6FBK,
WS6FBZ,
WS6SNK, WS6SBS,
WS6SGY, WS6SBK,
WS6SBZ,
INSTALLATION CONSIDERATIONS:
Power Feeds: Cord Ended
Dimensions: 6" or 8" Diameter
Depth Behind Plates: 3 1/2"
FIELD-WIRED
WSF8FNK, WSF8FBS,
WSF8FGY, WSF8FBK,
WSF8FBZ,
WSF8SNK, WSF8SBS,
WSF8SGY, WSF8SBK,
WSF8SBZ,
A/V Compatibility:
Legrand AVIP,
Extron® MAAP,
Ortronics® Series II
WSF8 Series
Power Compatibility:
Four Single 20A Proprietary
Communications Compatibility:
Ortronics® Cat 6 RJ45 Keystone
A/V Compatibility:
Legrand AVIP,
Extron® MAAP,
Ortronics® Series II
STEEL RACEWAY
SYSTEMS
FIELD-WIRED
WSF6FNK, WSF6FBS,
WSF6FGY, WSF6FBK,
WSF6FBZ,
WSF6SNK, WSF6SBS,
WSF6SGY, WSF6SBK,
WSF6SBZ,
6" [152mm] Field-Wired or
Cord-Ended Work Surface
Portals that can accept up to
five (5) Legrand AVIP or
Extron® Electronics MAAP
device plates.
Field-Wired
Cord-Ended
8" [203mm] Field-Wired or
Cord-Ended Work Surface
Portals that can accept up to
ten (10) Legrand AVIP or
Extron® Electronics MAAP
device plates.
CORD-ENDED
WS8FNK, WS8FBS,
WS8FGY, WS8FBK,
WS8FBZ,
WS8SNK, WS8SBS,
WS8SGY, WS8SBK,
WS8SBZ,
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
2400 Series Raceway
™
INSTALLATION CONSIDERATIONS:
KO Sizes: 1/2", 3/4", 1" Trade Size
Depth Behind Plates: 2"
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
A/V Compatibility:
Legrand AVIP,
V24DWNU
24DWNU-FW
Downward-Facing
Device Plate with Legrand
AVIP or Extron® Electronics
MAAP opening.
V24DWNS
24DWNS-FW
Downward-Facing
Device Plate with Ortronics®
Series II opening.
V3046U
G3046U
V3046S
G3046S
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
Altinex® Intera,
Extron® MAAP,
Ortronics® Series II
3000 Series™ Raceway
INSTALLATION CONSIDERATIONS:
KO Sizes: 1/2", 3/4", 1" Trade Size
Depth Behind Plates: 2 3/4"
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
A/V Compatibility:
Legrand AVIP, Altinex® Intera,
Extron® AAP & MAAP,
Ortronics® Series II
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
Bump-Up Device Plate
with Legrand AVIP or
Extron® Electronics MAAP
opening.
Bump-Up Device Plate
with Ortronics® Series II
opening.
V3046V
G3046V
Bump-Up Device Plate
with Extron® Electronics
AAP opening.
NOTE: Wiremold manufactures many additional pathway solutions. Those represented here have been
designed/modified to provide the depth behind the plate required for most A/V devices.
For additional design and installation considerations, please contact the factory.
7
STEEL RACEWAY
SYSTEMS
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
4000 Series Raceway
™
INSTALLATION CONSIDERATIONS:
KO Sizes: 1/2", 3/4", 1", 1 1/4" Trade Size
Depth Behind Plates: 2 3/4", Also available
with angled plate for increased depth
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Crestron® QuickMedia Wall
Plate Device,
Extron® AAP & MAAP,
Ortronics® Series II
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
V4047UX
G4047UX
Bump-Up Device Plate
with Extron® Electronics
MAAP opening.
V4047VX
G4046VX
Bump-Up Device Plate
with Extron® Electronics
AAP opening.
5507MAAP
5507MAAP-G
5507AAP
5507AAP-G
5507 Series Device Plate
with Extron® Electronics
AAP opening.
5507R
5507R-G
5507 Series Device Plate
with decorator style opening
for open A/V devices such
as Extron® Electronics,
Crestron® and Atinex®
Intera.
5507 Series Device Plate
with Extron® Electronics
MAAP opening.
DS4000® Series Raceway
INSTALLATION CONSIDERATIONS:
KO Sizes: 3/4", 1 1/4", 2 1/8" Trade Size
Depth Behind Plates: 2 7/8" in single
channel, 5 3/4" crossover, both channels
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Extron® MAAP,
Ortronics® Series II
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
DSDWNR-BK Downward-Facing Device Plate with decorator style
DSDWNR-BZ opening for open A/V devices such as Extron®
DSDWNR-DG Electronics, Crestron® and Atinex® Intera.
DSDWNR-DV
DSDWNS-BK Downward-Facing Device Plate w/Ortronics®
DSDWNS-BZ Series II opening.
DSDWNS-DG
DSDWNS-DV
DSDWNU-BK
DSDWNU-BZ
DSDWNU-DG
DSDWNU-DV
Downward-Facing Device Plate
w/Extron® Electronics MAAP opening.
6000® Series Raceway
INSTALLATION CONSIDERATIONS:
KO Sizes: 3/4", 1 1/4", 2 1/8" Trade Size
Depth Behind Plates: 2 7/8" in single
channel, 5 3/4" crossover, both channels
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Extron® MAAP,
Ortronics® Series II
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
5507MAAP
5507MAAP-G
5507 Series Device Plate
with Legrand AVIP or Extron®
Electronics MAAP opening.
5507AAP
5507AAP-G
5507 Series Device Plate
with Extron® Electronics
AAP opening.
5507R,
5507R-G
5507 Series Device Plate
with decorator style opening
for open A/V devices such
as Extron® Electronics,
Crestron® and Atinex®
Intera.
V4047UX
G4047UX
Bump-Up Device Plate with
Legrand AVIP or Extron®
Electronics MAAP opening.
V4047VX
G4047VX
Bump-Up Device Plate
with Extron® Electronics
AAP opening.
NOTE: Wiremold manufactures many additional pathway solutions. Those represented here have been
designed/modified to provide the depth behind the plate required for most A/V devices.
For additional design and installation considerations, please contact the factory.
8
STEEL RACEWAY
SYSTEMS
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
OFR Series Overfloor Raceway
™
INSTALLATION CONSIDERATIONS:
KO Sizes: 1/2", 1 1/4" Trade Size
Depth Behind Plates: 2 1/2"
Power Compatibility:
15A & 20A Duplex, GFCI,
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Extron® AAP & MAAP,
Ortronics® Series II
NONMETALLIC
RACEWAY SYSTEMS
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
OFR47-U2A
OFR47-U
Accepts up to two (2)
Legrand AVIP or Extron®
Electronics MAAP style
plates.
accept up to four (4)
Legrand AVIP or Extron®
Electronics MAAP style
plates
OFR47-V
OFR47-R
For covering rectangular
decorator style devices.
Accepts two (2) Extron®
Electronics AAP single
space modules.
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
5400 Series Raceway
™
INSTALLATION CONSIDERATIONS:
KO Sizes: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"
Trade Size
Depth Behind Plates: 1 3/4", Also available
with angled plate for increased depth
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Extron® MAAP,
Ortronics® Series II
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
5507MAAP
5507MAAP-FW
5507MAAP-WH
5507MAAP-BK
5507MAAP-G
5507MAAP-GY
5507 Series Device Plate w/Legrand AVIP
or Extron® Electronics MAAP opening.
5507AAP
5507AAP-FW
5507AAP-WH
5507AAP-BK
5507AAP-G
5507AAP-GY
5507R
5507R-FW
5507R-WH
5507R-BK
5507R-G
5507R-GY
5507 Series Device Plate w/decorator
style opening for open A/V devices such
as Extron® Electronics, Crestron® and
Atinex® Intera.
5507 Series Device Plate w/Extron®
Electronics AAP opening.
5500 Series™ Raceway
INSTALLATION CONSIDERATIONS:
KO Sizes: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"
Trade Size
Depth Behind Plates: 1 3/4", Also available
with angled plate for increased depth
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Extron® MAAP,
Ortronics® Series II
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
5507MAAP
5507MAAP-FW
5507MAAP-WH
5507MAAP-BK
5507MAAP-G
5507MAAP-GY
5507 Series Device Plate w/Legrand AVIP
or Extron® Electronics MAAP opening.
5507AAP
5507AAP-FW
5507AAP-WH
5507AAP-BK
5507AAP-G
5507AAP-GY
5507R
5507R-FW
5507R-WH
5507R-BK
5507R-G
5507R-GY
5507 Series Device Plate w/decorator
style opening for open A/V devices such
as Extron® Electronics, Crestron® and
Atinex® Intera.
5507 Series Device Plate w/Extron®
Electronics AAP opening.
NOTE: Wiremold manufactures many additional pathway solutions. Those represented here have been
designed/modified to provide the depth behind the plate required for most A/V devices.
For additional design and installation considerations, please contact the factory.
9
IN WALL
SYSTEMS
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
WallSource Multiple Service Boxes Raceway
™
INSTALLATION CONSIDERATIONS:
Configuration(s): 2-, 4- or 6-Gang
Dimensions: 2-Gang – 4 3/4"L x 5"W x 3 1/4"D
4-Gang – 9 3/16"L x 5"W x 3 1/4"D
6-Gang – 13 3/16"L x 5"W x 3 1/4"D
KO Sizes: 1/2", 3/4", 1", 1 1/2" Trade Size
Depth Behind Plates: 3 1/4"
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Crestron® QuickMedia
Wall Plate Device,
Extron® AAP & MAAP,
Ortronics® Series II
VERTICAL
SOLUTIONS
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
5507MAAP
5507MAAP-FW
5507MAAP-WH
5507MAAP-BK
5507MAAP-G
5507MAAP-GY
5507 Series Device Plate w/Legrand AVIP
or Extron® Electronics MAAP opening.
5507AAP
5507AAP-FW
5507AAP-WH
5507AAP-BK
5507AAP-G
5507AAP-GY
5507R
5507R-FW
5507R-WH
5507R-BK
5507R-G
5507R-GY
5507 Series Device Plate w/decorator
style opening for open A/V devices such
as Extron® Electronics, Crestron® and
Atinex® Intera.
5507 Series Device Plate w/Extron®
Electronics AAP opening.
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
Vista Architectural Columns
™
INSTALLATION CONSIDERATIONS:
End Channel Profile: Round or Square
Dimensions: 4" x 9" or 4" x 13 1/2"
Height: 10' (up to 15' with Extension Kit)
Service Capability: Dual
KO Feed Sizes: 3/4", 1" Trade Size
Depth Behind Plate: 3 3/4"
Configurable Solutions Available
VSCR – Crestron® & Extron®
Electronics Double-Gang
Decorator Style Device Plate for
Small Vista Columns.
VLEA – Device Plate with
Extron® Electronics AAP opening
for Large Vista Columns.
VSEA – Device Plate with
Extron® Electronics AAP opening
for Small Vista Columns.
VLEM – Device Plate with
Legrand AVIP or Extron®
Electronics MAAP opening for
Large Vista Columns.
VSEM – Device Plate with
Legrand AVIP or Extron®
Electronics MAAP opening for
Small Vista Columns.
VLRT – Device Plate with
opening for three (3)
Ortronics® Series II devices
for Large Vista Columns.
VLCR – Crestron® & Extron®
Electronics Double-Gang
Decorator Style Device Plate
for Large Vista Columns.
VSRT – Device Plate with opening
for one (1) Ortronics® Series II
device for Small Vista Columns.
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Crestron® QuickMedia
Wall Plate Device,
Extron® AAP & MAAP,
Ortronics® Series II
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
NOTE: Wiremold manufactures many additional pathway solutions. Those represented here have been
designed/modified to provide the depth behind the plate required for most A/V devices.
For additional design and installation considerations, please contact the factory.
10
VERTICAL
SOLUTIONS
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
Vista Point5 Architectural Column
™
INSTALLATION CONSIDERATIONS:
End Channel Profile: Round or Square
Dimensions: 4" x 9" or 4" x 13 1/2"
Height: 3'
Service Capability: Dual
KO Feed Sizes: 3/4", 1" Trade Size
Depth Behind Plate: 3 3/4"
Configurable Solutions Available
VSCR – Crestron® & Extron®
Electronics Double-Gang
Decorator Style Device Plate for
Small Vista Columns.
VLCR – Crestron® & Extron®
Electronics Double-Gang
Decorator Style Device Plate
for Large Vista Columns.
VSEA – Device Plate with
Extron® Electronics AAP opening
for Small Vista Columns.
VLEA – Device Plate with
Extron® Electronics AAP opening
for Large Vista Columns.
VSEM – Device Plate with
Legrand AVIP or Extron®
Electronics MAAP opening for
Small Vista Columns.
VLEM – Device Plate with Extron®
Electronics MAAP opening for
Large Vista Columns.
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Crestron® QuickMedia
Wall Plate Device,
Extron® AAP & MAAP,
Ortronics® Series II
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
VSEAP5 – Device Plate with two
(2) duplex receptacles and Extron®
Electronics AAP openings for
small Point 5 Vista.
VSEMP5 – Device Plate with two
(2) duplex receptacles and
Legrand AVIP or Extron®
Electronics MAAP openings for
small Point 5 Vista.
VLEAP5 – Device Plate with
two (2) duplex receptacles
and Extron® Electronics
AAP openings for large
Point 5 Vista.
VLEMP5 – Device Plate
with two (2) duplex
receptacles and Legrand
AVIP or Extron® Electronics
MAAP openings for large
Point 5 Vista.
VL2A – Device plate for Wiremold
CM Series Open System for
Ortronics Series II and TracJack
devices for large Point 5 Vista.
Tele-Power® Poles
INSTALLATION CONSIDERATIONS:
Dimensions: 3" x 2 3/4"
Height: 10', 12' standard lengths
Service Capability: Dual
KO Feed Sizes: 3/4", 1" Trade Size
Depth Behind Plate: 2 7/8"
Configurable Solutions Available
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
A/V Compatibility:
Legrand AVIP,
Extron® AAP & MAAP,
Ortronics® Series II
30TP-MAAP – Device Plate with
Legrand AVIP or Extron® Electronics
MAAP opening.
30TP-AAP – Device Plate with
GFCI or decorator style opening
for open A/V devices such as
Extron® Electronics, Crestron®
and Atinex® Intera.
30TP-L – Device Plate w/Extron®
Electronics AAP opening.
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
NOTE: Wiremold manufactures many additional pathway solutions. Those represented here have been
designed/modified to provide the depth behind the plate required for most A/V devices.
For additional design and installation considerations, please contact the factory.
11
INFLOOR
SYSTEMS
INSTALLATION CONSIDERATIONS &
COMPATIBILITY
A/V PART NUMBER(S) & LINE ART
525 Series Service Fittings – For use with Walkerduct Underfloor Duct Systems
™
®
INSTALLATION CONSIDERATIONS:
Service Capacity: Single Service
System Compatibility: Underfloor Duct,
Walkercell, Flushduct
Depth Behind Plates: 3 1/8"
Dimensions: 4 7/16"L x 3"H x 3 1/8"D
System Feed: 1" or 1 1/4" Trade Size
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Extron® AAP & MAAP,
Ortronics® Series II
500-MAAP – 525 Series Device
Plate with Legrqand AVIP or
Extron® Electronics
MAAP opening.
500RT – 525 Series
Device Plate with
opening for one (1)
Ortronics® Series II
Device.
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
Communications Compatibility:
Ortronics® Series II & TracJack, Pass &
Seymour® Activate, Wiremold Open System
CM2 Series accepts Avaya/Systimax,
Keystone & Nordx
Multiplex™ Series Service Fittings
INSTALLATION CONSIDERATIONS:
Service Capacity: Dual Service, 1- & 2-gang
System Compatibility: Underfloor Duct,
Walkercell, Flushduct
Depth Behind Plates: 1 3/4"
Dimensions: 4 3/4"L x 3"H x 6 3/4"D
System Feed: 1" or 1 1/4" Trade Size
A/V Compatibility:
Legrand AVIP,
Altinex® Intera,
Extron® AAP & MAAP,
Ortronics® Series II
Power Compatibility:
15A & 20A Duplex, GFCI, Decorator
Communications Compatibility:
Ortronics® Series II & TracJack, Wiremold
Open System CM2 Series accepts
Avaya/Systimax, Keystone & Nordx
LTF48-MAAP – Multiplex
Series Device Plate with
Legrand AVIP or Extron®
Electronics MAAP opening.
1-GANG
2-GANG
3"
[76mm]
6 3/4"
[171mm]
3"
[76mm]
4 3/4"
[121mm]
6 3/4"
[171mm]
8 3/4"
[222mm]
NOTE: Wiremold manufactures many additional pathway solutions. Those represented here have been
designed/modified to provide the depth behind the plate required for most A/V devices.
For additional design and installation considerations, please contact the factory.
WIREMOLD
U.S. and International:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251
Canada:
570 Applewood Crescent • Vaughan, Ontario L4K 4B4
1-800-723-5175 • FAX 905-738-9721
© Copyright 2011 Legrand All Rights Reserved
ED1596R3 – Updated November 2011 – For latest specs visit www.legrand.us/wiremold