Custom Locks
12.15
page 98
Custom Locks
Surelock McGill design locks to meet specific situations and environments. This section
contains a selection of these locks that have found a wider market and may well provide a
solution to a problem that you need to overcome. For example:
Run-out protection Designed primarily for the retail trade, this places a delay on the operation
of a panic exit. It will hinder break out from an emergency exit long enough for a thief to be
apprehended by staff. The device is linked to the fire alarm system to override the delay in the
case of fire and is endorsed by many UK fire authorities.
Shared access Legislation requires that authorised service providers have access to certain
telecom exchange equipment. The lock enables an exchange owner to provide equipment
room access to authorised keyholders (using their chosen key manufacturer and suiting
arrangement) while maintaining normal security levels through the exchange building.
Twin-locking This lock incorporates two independently operated deadlocks enabling, for example:
• Lock down for the prevention of access by normally authorised personnel.
Cashiers office This enables a cashier carrying goods that they do not want to release
to unlock and open the door with one hand. The system automatically resecures on door
closure. It provides an emergency exit from the inside at all times.
Custom Locks comprise
• Multipoint devices: Slimline products, espagnolette mullions, hook locks and devices
for special blast applications.
• Single-point devices with key, solenoid or remote release; panic and emergency exit.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom
Locks
• Dual attendance, for access to armouries or hazardous materials.
Custom Locks
12.15
Custom Locks
1. Multi-point locks
Access Controlled Entry and Exit - Safe and Secure
100
Twin Locking - Enforced Two-Person Attendance
102
Twin Locking - Out of Hours Lockdown
104
S-11705 Slimline triple-deadlocking, dual-function locks
106
Tandem Locking - Shared Services
108
Emergency Exit with Automatic Lock Back
110
Emergency Exit with Visual Breach Indication
112
Delayed Panic Exit
114
Access Control with Siege Protection & Emergency Exit
116
Motorised Panic Exit - Bolting
118
Motorised Panic Exit - Deadlocking
120
Motorised Emergency Exit - Deadlocking
122
Cashiers Office Lock - Safe Exit
124
Solent Lock
126
Fleet Lock
130
SR (Series 25) Heavy-duty Multi-point Locks
131
Espagnolette Mullions
133
Blast Protection Mullions
137
Bespoke Blast Protection Products
138
Barrier Bolt
139
Moorgate Lock
141
Loddon Lock
143
2. Single-point locks
Ribble Cabinet Lock
145
Tamar Door Lock
147
Fraser Bar
149
AC850 Motorised Lock
150
AC900 Motorised Lock
152
PURBROOK 40mm throw Deadlock
154
EX700 Latch
156
Chubb 3R35 with Euro-profile cylinder facility
158
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 99
Custom Locks
Multi-point
page 100
12.15
Access Controlled Entry and Exit - Safe and Secure
Dual Mode Security
Primary mode: Access control entry and exit
Power fail mode: Key entry and emergency exit
The lock provides controlled entry and exit. This ensures control of people passing both in and out of a building, or a
specific area. In the event of power failure, the lock will automatically revert to the power fail mode, enabling key entry
and an emergency exit. In both modes the multi-point deadlocking device secures automatically upon door closure.
• Access controlled entry and exit in the primary mode
• Key entry and emergency exit in the event of power failure
• Three 15mm hardened steel bolts each with a throw of 25mm
• Automatic re-securement upon door closure
• Electric monitoring of each lock status
Slimline devices are successfully tested to high levels of Security, Fire, Blast and
Ballistic protection and tested to over a million cycles.
Suitable for doors up to 2,200mm tall, over height extensions are available for
taller doors. The supplied steel core fixings and bolt keeps are suitable for an
outward opening door hung in a timber frame and a concrete floor.
Enhancements available include additional horizontal bolts if further attack
resistance is required, plus a choice of registered cylinders and cylinder guards
(see Additional Features).
1
2
3
1
2
3
4
5
6
4
5
6
7
8
9
7
8
9
Specification:
Upper lock - 12V D.C. solenoid, energise to unlock (fail secure),
with anti-tamper circuitry.
Lower lock - 12V D.C. solenoid, energise to lock (fail safe),
with anti-tamper circuitry.
S-11250 access
control entry/exit, safe
and secure in the event
of power failure, left
hand shown
Entry in case of power failure - external key override (Union as standard),with
alternative makes of cylinders available. Cylinder protection to LPS 1175 security
rating 3, 4 or 5 is also available (see Additional Features).
Exit in case of power failure - an ergonomically designed lever handle provides
a one-handed emergency exit.
Finish - grey-white RAL 9002 leatherette powder coating co-ordinated with bright
zinc plate.
Ordering code S-11250
Important – It is recommended that a push button be fitted on the escape side in order to allow free exit in an
emergency. This should be wired to interrupt power to the lock when free exit is required. In addition, the lock may
also be wired via the fire alarm system to automatically interrupt power when the alarm system is activated.
key entry
Power failure mode
emergency exit
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 101
Dual Mode Security
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
1
O
Cylinder - Kaba-20 (registered)
O2
Cylinder - Assa Twin Combi 5800 (registered)
O5
Cylinder - Medeco m3-ARX (registered)
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O
O
10
Cylinder - Kaba quattro pluS (registered)
O91
Cylinder - Abloy Protec (registered, diamond level)
P
Cylinder guard LPS 1175 security rating 3 protection for door thickness 42 - 60mm
P
5
Cylinder guard LPS 1175 security rating 4 protection for door thickness 42 - 60mm
P
6
Cylinder guard LPS 1175 security rating 5 protection for door thickness 42 - 60mm
U
Slave unit, 90 degree and continue - additional bolt above handle
U1
Slave unit, 90 degree and continue - additional bolt below handle
Keeps included in this package:
Code
Description
SC
Outward-opening timber frame keep
SC1
Outward-opening timber frame keep and strike
SF
Dust excluding floor socket
Ordering Example:
S-11250-04-O5P5
Multi-point access control entry and exit device, safe and secure in the event of power
failure. An Medeco m3-ARX registered cylinder (option O5) with cylinder protection to
LPS 1175 security rating 4 (option P5).
Handing chart
Note: The handing and orientation code ‘04’ refers to a ‘right hand’,
outward opening door.
Surelock’s aspirations to provide customers with the correct solution to meet an ever expanding complexity of
operational requirements have once again proven to be successful. If you have a specific operational requirement,
no matter how complex, we are pleased to provide a solution.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
Twin Locking - Enforced Two-Person Attendance
Dual Discipline Entry
This Slimline system requires the use of two keys to open the door. It is typically used where the requirement
for two personnel to unlock a door is part of the security or health and safety procedure. Union cylinders are
supplied as standard but other makes of cylinder may be fitted. Cylinder guards are available.
An internal lever handle provides for an emergency exit.
• Controlled entry, whereby two persons need to be present
• Three 15mm hardened steel bolts each with a throw of 25mm
• Automatic re-securement upon door closure
• Emergency exit to BS EN 179: 2008, CE marked
Slimline devices are successfully tested to high levels of Security, Fire,
Blast and Ballistic protection and tested to over a million cycles.
Suitable for doors up to 2,200mm tall, over height extensions are available
for taller doors. The supplied steel core fixings and bolt keeps are suitable
for an outward opening door hung in a timber frame and a concrete floor.
Enhancements available include electric monitoring of the lock status,
a choice of registered cylinders and cylinder guards, plus additional
horizontal bolts if further attack resistance is required, (see Additional
Features).
Finish - grey-white RAL 9002 leatherette powder coating coordinated with
bright zinc plate.
Ordering code S-11255
S-11255 enforced 2-person
attendance device,
left hand shown
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 102
Custom Locks
Multi-point
12.15
page 103
Dual Discipline Entry
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
M
Electric monitoring of the bolt status
N
Electric monitoring of both lock status
O0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
O1
Cylinder - Kaba-20 (registered)
O
2
Cylinder - Assa Twin Combi 5800 (registered)
O
5
Cylinder - Medeco m3-ARX (registered)
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O10
Cylinder - Kaba quattro pluS (registered)
O
91
Cylinder - Abloy Protec (registered, diamond level)
P
Cylinder guard LPS 1175 security rating 3 protection for door thickness 42 -60mm
P5
Cylinder guard LPS 1175 security rating 4 protection for door thickness 42 - 60mm
P6
Cylinder guard LPS 1175 security rating 5 protection for door thickness 42 - 60mm
U
Slave unit, 90 degree and continue - additional bolt above handle
U
1
Slave unit, 90 degree and continue - additional bolt below handle
Keeps included in this package:
Code
Description
SC
Outward-opening timber frame keep
SC1
Outward-opening timber frame keep and strike
SF
Dust excluding floor socket
Ordering Example:
S-11255-04-NO5P5 Multi-point twin-locking device, electric monitoring of both lock status (option N),
Medeco m3-ARX registered cylinders (option O5), each protected by a cylinder guard to
LPS 1175 security rating 4 (option P5) and a single handed means of emergency exit.
Handing chart
Note: The handing and orientation code ‘04’ refers to a ‘right hand’,
outward opening door.
Surelock’s aspirations to provide customers with the correct solution to meet an ever expanding complexity of
operational requirements have once again proven to be successful. If you have a specific operational requirement,
no matter how complex, we are pleased to provide a solution.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 104
Twin Locking - Out of Hours Lockdown
Restricting out-of-hours Access
In this configuration, the Slimline system has a solenoid operated deadlock that provides access control entry.
The door automatically re-secures upon door closure. A key operated deadlock is incorporated to provide out
of hours lockdown by inhibiting the access control.
An internal lever handle provides for an emergency exit.
• 12V D.C. solenoid lock release for access
• Key operated deadlock for out of hours lockdown
• Three 15mm hardened steel bolts each with a throw of 25mm
• Automatic re-securement upon door closure
• Emergency exit to BS EN 179: 2008, CE marked
Slimline devices are successfully tested to high levels of Security, Fire,
Blast and Ballistic protection and tested to over a million cycles.
Suitable for doors up to 2,200mm tall, over height extensions are
available for taller doors. The supplied steel core fixings and bolt
keeps are suitable for an outward opening door hung in a timber frame
and a concrete floor.
1
2
3
4
5
6
7
8
9
Enhancements available include additional horizontal bolts if further
attack resistance is required, electric monitoring of the bolt and lock
status, external key override in case of power failure, a choice of
registered cylinders and cylinder guards to suit individual requirements
(see Additional Features)
Finish - grey-white RAL 9002 leatherette powder coating co-ordinated
with bright zinc plate.
Ordering code S-11260
S-11260 out of hours
lockdown device, left
hand shown
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 105
Restricting out-of-hours Access
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
K2
External key release in case of power failure
M
Electric monitoring of the bolt status
N
Electric monitoring of both lock status
O0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
O1
Cylinder - Kaba-20 (registered)
O
2
Cylinder - Assa Twin Combi 5800 (registered)
O
5
Cylinder - Medeco m3-ARX (registered)
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O10
Cylinder - Kaba quattro pluS (registered)
O
91
Cylinder - Abloy Protec (registered, diamond level)
P
Cylinder guard LPS 1175 security rating 3 protection for door thickness 42 - 60mm
P5
Cylinder guard LPS 1175 security rating 4 protection for door thickness 42 - 60mm
P6
Cylinder guard LPS 1175 security rating 5 protection for door thickness 42 - 60mm
U
Slave unit, 90 degree and continue - additional bolt above handle
U
1
Slave unit, 90 degree and continue - additional bolt below handle
Keeps included in this package:
Code
Description
SC
Outward-opening timber frame keep
SC1
Outward-opening timber frame keep and strike
SF
Dust excluding floor socket
Ordering Example:
S-11260-04-K2NO5P
Multi-point access control deadlocking device with out of hours lockdown facility,
electric monitoring of lock status (option N), external key cylinder in case of power
failure (option K2), Medeco m3-ARX registered cylinders (option O5) protected by a
cylinder guard to LPS 1175 security rating 3 (option P) and a single handed means of
emergency exit.
Handing chart
Note: The handing and orientation code ‘04’ refers to a ‘right hand’,
outward opening door.
Surelock’s aspirations to provide customers with the correct solution to meet an ever expanding complexity of
operational requirements have once again proven to be successful. If you have a specific operational requirement,
no matter how complex, we are pleased to provide a solution.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 106
Slimline triple-deadlocking, dual-function locks
Daytime access control with out-of-hours two-person ‘lock-down’,
emergency exit at all times
Slimline triple-deadlocking devices provide the opportunity to meet a wide of range applications. The S-11705
requires two key holders to set the control between access control entry during working-hours and out-of-hours
lock-down. An emergency exit provision is available at all times.
Two key holders set the control between working-hours and
out-of-hours lock-down.
1
2
3
4
5
6
7
8
9
Access control Entry during normal working period.
Single-handed means of emergency exit on the inside at all times.
Three 15mm hardened steel bolts each with a throw of 25mm, automatically
re-secure upon door closure.
Slimline devices are successfully tested to high levels of Security, Fire,
Blast and Ballistic protection and tested to over a million cycles.
Suitable for doors up to 2,200mm tall, over height extensions are
available for taller doors.
A full range of enhancements available including electric monitoring
of each lock status, a full range of approved cylinders, stainless
steel 316 finish for hostile enviroments, plus additional horizontal
bolts if further forcible attack resistance is required,
(see Additional Features).
1
2
3
4
5
6
7
8
9
Finish - grey-white RAL 9002 leatherette powder coating
co-ordinated with bright zinc plate. Also available in stainless
steel 316 for hostile environments .
Ordering code S-11705
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 107
Triple Deadlocking, Multi-discipline Locks
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
K2
External key release in case of power failure
M
Electric monitoring of the bolt status
N
Electric monitoring (3 No locks)
O0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
O1
Cylinder - Kaba-20 (registered)
O
2
Cylinder - Assa Twin Combi 5800 (registered)
O
5
Cylinder - Medeco m3-ARX (registered)
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O10
Cylinder - Kaba quattro pluS (registered)
O
91
Cylinder - Abloy Protec (registered, diamond level)
P
2 No Cylinder Cylinder guard LPS 1175 security rating 3 protection for door thickness 42 - 60mm
P5
2 No Cylinder Cylinder guard LPS 1175 security rating 4 protection for door thickness 42 - 60mm
S
Stainless steel 316
U
U
Slave unit, 90 degree and continue - additional bolt above handle
1
Slave unit, 90 degree and continue - additional bolt below handle
Keeps included in this package:
Code
Description
SC
Outward-opening timber frame keep
SC1
Outward-opening timber frame keep and strike
SF
Dust excluding floor socket
Ordering Example:
S-11705-04-NO5P
Triple deadlocking, multi-discipline device, with out-of-hours lock down, daytime electric
lock release, lock status monitoring of all three locks (option N), two registered
Medeco m3-ARX registered cylinders, each protected with cylinder guards tested to LPS
1175 SR3, with single handed means of exit at all times.
Handing chart
Note: The handing and orientation code ‘04’ refers to a ‘right hand’,
outward opening door.
Surelock’s aspirations to provide customers with the correct solution to meet an ever expanding complexity of
operational requirements have once again proven to be successful. If you have a specific operational requirement,
no matter how complex, we are pleased to provide a solution.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 108
Tandem Locking - Shared Services
Multiple Key Access
In this configuration the Slimline system can be unlocked by one of a number of different keys. This solution is
typically used where two or more organisations require independent access to secure facilities. A cylinder can
be incorporated into the lock for each organisation. A solenoid can also be included to provide an interface with
an access control system.
The cylinders used can be chosen from most manufacturers so
the individual keys can comply with existing key suiting or other
preferences of the individual organisations. This coupled with the
provision of access control enables independent access to secure
facilities while maintaining the access/security preferences of the
participating organisations.
• A multiple choice of entry to support shared services
• A choice of turnknob, panic or emergency exit release
• Three 15mm hardened steel bolts each with a throw of 25mm
• Automatic re-securement upon door closure
Slimline devices are successfully tested to high levels of Security,
Fire, Blast and Ballistic protection and tested to over a million cycles.
Suitable for doors up to 2,200mm tall, over height extensions are
available for taller doors. The supplied steel core fixings and bolt
keeps are suitable for an outward opening door hung in a timber
frame and a concrete floor.
Enhancements available include electric monitoring of bolt and lock
status, a choice of registered cylinders and cylinder guards to suit
individual requirements. Additional horizontal bolts if further attack
resistance is required, plus panic or emergency exit facility
(see Additional Features).
Finish - grey-white RAL 9002 leatherette powder coating
co-ordinated with bright zinc plate.
Ordering code S-11265
S-11265 tandem
locking device,
left hand shown
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 109
Multiple Access
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
M
Electric monitoring of the bolt status
N
Electric monitoring of both lock status
O0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
O1
Cylinder - Kaba-20 (registered)
O
2
Cylinder - Assa Twin Combi 5800 (registered)
O
5
Cylinder - Medeco m3-ARX (registered)
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O10
Cylinder - Kaba quattro pluS (registered)
O
91
Cylinder - Abloy Protec (registered, diamond level)
P
Cylinder guard LPS 1175 security rating 3 protection for door thickness 42 - 60mm
P5
Cylinder guard LPS 1175 security rating 4 protection for door thickness 42 - 60mm
P6
Cylinder guard LPS 1175 security rating 5 protection for door thickness 42 - 60mm
X
One handed means of exit by lever handle
U
Slave unit, 90 degree and continue - additional bolt above handle
U1
Slave unit, 90 degree and continue - additional bolt below handle
Keeps included in this package:
Code
Description
SC
Outward-opening timber frame keep
SC1
Outward-opening timber frame keep and strike
SF
Dust excluding floor socket
Ordering Example:
S-11265-04-O5O10P
Multi-point tandem deadlocking device with internal turnknob release, Kaba quattro pluS
registered cylinder (option O10), Medeco m3-ARX registered cylinder (option O5),
each protected by a cylinder guard to LPS 1175 security rating 3 (option P).
Handing chart
Note: The handing and orientation code ‘04’ refers to a ‘right hand’,
outward opening door.
Surelock’s aspirations to provide customers with the correct solution to meet an ever expanding complexity of
operational requirements have once again proven to be successful. If you have a specific operational requirement,
no matter how complex, we are pleased to provide a solution.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 110
Emergency Exit with Automatic Lock Back
Hold-back after Breach with Key Re-set
In this configuration, the Slimline system provides an emergency exit that holds the bolts in their retracted
position indicating that a breach of the exit has occurred. The bolts are held until reset using a key. Even if a
partial attempt is made to release the system, the mechanism holds the bolts in their partially retracted position
indicating an attempted breach or simply tampering.
A microswitch provides electric monitoring of the bolt status and a key cylinder (Union as standard) releases the
bolts enabling them to fire back into their thrown position. A choice of alternative cylinders from most leading
manufacturers is available.
The multi-point device provides security evenly across the leading edge
of the door, ensuring a smooth operation, required to meet the release
pressures of BS EN 179: 2008.
• Emergency Exit to BS EN 179: 2008
• Automatic bolt retraction hold-back
• Provides surreptitious anti-tamper protection
• Electric monitoring of the bolt status
• Three 15mm hardened steel bolts each with a throw of 25mm
• Automatic re-securement upon door closure
• Key controlled re-set
Slimline devices are successfully tested to high levels of Security, Fire,
Blast and Ballistic protection and tested to over a million cycles.
Suitable for doors up to 2,200mm tall, over height extensions are available
for taller doors. The supplied steel core fixings and bolt keeps are suitable
for an outward opening door hung in a timber frame and a concrete floor.
Enhancements available include a choice of registered cylinders and
cylinder guards, plus additional horizontal bolts if further attack resistance
is required (see Additional Features).
Finish - grey-white RAL 9002 leatherette powder coating co-ordinated
with bright zinc plate.
Ordering code S-10780
S-10780 Emergency exit with
automatic lock-back & key
re-set, left hand shown
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 111
Hold-back after Breach with Key Re-set
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
1
O
Cylinder - Kaba-20 (registered)
O2
Cylinder - Assa Twin Combi 5800 (registered)
O5
Cylinder - Medeco m3-ARX (registered)
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O
O
10
Cylinder - Kaba quattro pluS (registered)
O91
Cylinder - Abloy Protec (registered, diamond level)
U
Slave unit, 90 degree and continue - additional bolt above handle
U
1
Slave unit, 90 degree and continue - additional bolt below handle
Keeps included in this package:
Code
Description
SC
Outward-opening timber frame keep
SC1
Outward-opening timber frame keep and strike
SF
Dust excluding floor socket
Ordering Example:
S-10780-04-O5
Multi-point emergency exit device with automatic lock-back facility with a registered
Medeco m3-ARX cylinder (option O5).
Handing chart
Note: The handing and orientation code ‘04’ refers
to a ‘right hand’, outward opening door.
Surelock’s aspirations to provide customers with the correct solution to meet an ever expanding complexity of
operational requirements have once again proven to be successful. If you have a specific operational requirement,
no matter how complex, we are pleased to provide a solution.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 112
Emergency Exit with Visual Breach Indication
VIP Breach Awareness Device
This Slimline system provides emergency exit to BS EN 179: 2008 and visual indication of a breach. An internal
push pad provides a comfortable method of exit operation, releasing the multi-point device and driving a large
red indicator panel out as the bolts are being retracted.
The system automatically re-secures upon door closure, but the breach indicator remains locked out (until reset
by a key) to show that a breach has occurred.
A 90 degree slave unit on the bottom bolt directs it into the frame.
• Emergency exit to BS EN 179: 2008
• Visual breach awareness
• Key reset facility
• Three 15mm hardened steel bolts each with a throw of 25mm
• Automatic re-securement upon door closure
• 90 degree slave to bottom bolt
Slimline devices are successfully tested to high levels of Security, Fire,
Blast and Ballistic protection and tested to over a million cycles.
Suitable for doors up to 2,200mm tall, over height extensions are available
for taller doors. The supplied steel core fixings and bolt keeps are suitable
for an outward opening door hung in a timber frame and a concrete floor.
Enhancements available include microswitches monitoring the bolt and
indicator status, external key entry with a choice of cylinders from leading
manufacturers, to suit individual requirements (see Additional Features).
Finish - grey-white RAL 9002 leatherette powder coating co-ordinated
with bright zinc plate.
Ordering code S-10516
S-10516 Emergency exit with
visual indicator and lower
90o slave, left hand shown
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 113
VIP Breach Awareness Device
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
L
LEO (external lockable handle), surface mounted
L
1
Recessed LEO (flush fitting) - tested to LPS 1175 security rating 3 protection
2
Recessed LEO (flush fitting) with cylinder guard - tested to LPS 1175 security rating 4 protection
L
O0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
1
Cylinder - Kaba-20 (registered)
O
2
Cylinder - Assa Twin Combi 5800 (registered)
O
5
Cylinder - Medeco m3-ARX (registered)
O
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O
10
Cylinder - Kaba quattro pluS (registered)
O
91
Cylinder - Abloy Protec (registered, diamond level)
V
1
V2
VIP (Visual Indicator Panel) with status monitoring & isolation
VIP (Visual Indicator Panel) with status monitoring
Keeps included in this package:
Code
Description
SC
Outward-opening timber frame keep
SC1
Outward-opening timber frame keep and strike
Ordering Example:
S-10516-04-L1O5V2
Multi-point emergency exit with visual breach awareness, external key andhandle
provision in case of power failure (option L1), fitted with a registered Medeco m3 ARX
cylinder fitted (option O5) and status monitoring (option V2).
Handing chart
Note: The handing and orientation code ‘04’ refers
to a ‘right hand’, outward opening door.
Surelock’s aspirations to provide customers with the correct solution to meet an ever expanding complexity of
operational requirements have once again proven to be successful. If you have a specific operational requirement,
no matter how complex, we are pleased to provide a solution.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 114
Delayed Panic Exit
Run-out Protection
The Slimline delayed egress system provides a time-delayed panic exit facility. It is typically used to protect against
‘run out’ theft, where goods are stolen and ‘run out’ through a panic exit to an awaiting vehicle. It can also be used
for holding areas where a delayed exit is required unless the fire alarm is activated.
A key facility is included to switch off the alarm and re-set the system:
• Internal panic bar providing a ‘time-delayed panic exit’
• Immediate release in the case of a fire, when linked to
the fire alarm
• Electric monitoring of bolt status
• Key reset facility
• Three 15mm hardened steel bolts each with a throw
of 25mm
• Automatic re-securement upon door closure
Slimline devices are successfully tested to high levels of
Security, Fire, Blast and Ballistic protection and tested to
over a million cycles. Suitable for doors up to 2,200mm tall,
over height extensions are available for taller doors.
The device can be enhanced to include external key entry
with a choice of cylinders from leading manufacturers.
Technical - Voltage 12V D.C. energise to lock (fail safe),
with time delay to suit requirements, 20W nominal
power consumption.
Finish - grey-white RAL 9002 leatherette powder coating
co-ordinated with bright zinc plate.
Ordering code S-11314
S-11314 delayed panic exit
device, left hand shown
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 115
Run-out Protection
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
L
LEO (external lockable handle), surface mounted
1
Recessed LEO (flush fitting) - tested to LPS 1175 security rating 3 protection
2
L
Recessed LEO (flush fitting) with cylinder guard - tested to LPS 1175 security rating 4 protection
O0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
O1
Cylinder - Kaba-20 (registered)
L
O
2
Cylinder - Assa Twin Combi 5800 (registered)
O
5
Cylinder - Medeco m3-ARX (registered)
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O10
Cylinder - Kaba quattro pluS (registered)
O
91
Cylinder - Abloy Protec (registered, diamond level)
Keeps included in this package:
Code
Description
SC
Outward-opening timber frame keep
SC1
Outward-opening timber frame keep and strike
SF
Dust excluding floor socket
Ordering Example:
S-11314-04-L1O5 Multi-point delayed panic exit, external key and handle provision in case of power failure
(option L1), fitted with a registered Medeco m3-ARX cylinder fitted (option O5).
Handing chart
Note: The handing and orientation code ‘04’ refers
to a ‘right hand’, outward opening door.
Surelock’s aspirations to provide customers with the correct solution to meet an ever expanding complexity of
operational requirements have once again proven to be successful. If you have a specific operational requirement,
no matter how complex, we are pleased to provide a solution.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
Access Control with Siege Protection & Safe Exit
Internal Lockdown with Emergency Exit
A multi-point locking system with a solenoid deadlock to provided access control entry, with a simple fast
method of providing a lockdown on the inside, by way of a distinctive red lever handle. Denying access to all
from the outside, as in the case of a siege situation.
An internal green lever handle provides a single handed means of free exit and the multi-point locking
device automatically re-secures upon door closure. With a microswitch
monitoring the bolt status.
• Access control entry
• Internal siege deadlock
• Emergency exit of both locks
• Electric monitoring of the bolt status
• Three 15mm hardened steel bolts each with a throw of 25mm
• Automatic re-securement upon door closure
Slimline devices are successfully tested to high levels of Security, Fire,
Blast and Ballistic protection and tested to over a million cycles.
Suitable for doors up to 2,200mm tall, over height extensions are available
for taller doors. The steel core fixings and bolt keeps supplied are suitable
for an outward opening door hung in a timber frame and a concrete floor.
Enhancements available include electric monitoring of the lock status,
external key override in case of power failure, a choice of registered
cylinders and cylinder guards, plus additional horizontal bolts if further
attack resistance is required, (see Additional Features).
Finish - grey-white RAL 9002 leatherette powder coating co-ordinated
with bright zinc plate.
1
2
3
4
5
6
7
8
9
Ordering code S-11310
S-11310 Slimline access
control device with siege
protection, left hand shown
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 116
Custom Locks
Multi-point
12.15
page 117
Internal Lockdown with Emergency Exit
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
K2
External key release in case of power failure
N
Electric monitoring of both lock status
O
0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
O1
Cylinder - Kaba-20 (registered)
O2
Cylinder - Assa Twin Combi 5800 (registered)
O
5
O9
O
10
Cylinder - Medeco m3-ARX (registered)
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
Cylinder - Kaba quattro pluS (registered)
O91
Cylinder - Abloy Protec (registered, diamond level)
P
Cylinder guard LPS 1175 security rating 3 protection for door thickness 42 - 60mm
P
5
Cylinder guard LPS 1175 security rating 4 protection for door thickness 42 - 60mm
P
6
Cylinder guard LPS 1175 security rating 5 protection for door thickness 42 - 60mm
U
Slave unit, 90 degree and continue - additional bolt above handle
Keeps included in this package:
Code
Description
SC
Outward-opening timber frame keep
SC1
Outward-opening timber frame keep and strike
SF
Dust excluding floor socket
Ordering Example:
S-11310-04-K2NO5P6
Multi-point access control with internal lockdown facility, external key and handle
provision in case of power failure (K2) with a registered Medeco m3-ARX cylinder
(option O5), protected by a cylinder guard to LPS 1175 security rating 5 (option P6),
plus electric monitoring of the lock status (option N).
Handing chart
Note: The handing and orientation code ‘04’ refers to a ‘right hand’,
outward opening door.
Surelock’s aspirations to provide customers with the correct solution to meet an ever expanding complexity of
operational requirements have once again proven to be successful. If you have a specific operational requirement,
no matter how complex, we are pleased to provide a solution.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 118
Motorised Panic Exit - Bolting
Remote Release with Panic Exit
In this configuration the Slimline system provides remotely controlled external entry combined with panic exit.
The system incorporates a remotely controlled motor to retract the bolts so the door can be opened (by a powered
actuator or pull handle - not supplied). The bolts are then restrained in their retracted position while the motor returns
to it’s parked position, enabling the door to re-secure automatically upon closure.
The system can be released from the inside by a panic bar.
Again the bolts are held in their retracted position by the
restraint whilst the door is open. The restraint releases upon
door closure to provide automatic resecurement.
Typical applications:
• Disabled access
• Unmanned buildings
• Sterile entry areas
The motor controller provides outputs for bolt status
monitoring, which can be used within a building
management system for automatic door actuation, or
sequencing of a number of doors. The controller requires
mains electrical input.
Suitable for doors up to 2,200mm tall, over height
extensions are available for taller doors. The supplied steel
core fixings and bolt keeps are suitable for an outward
opening door hung in a timber frame and a concrete floor.
An external key option provides alternative access in the
event of a power failure; with a choice of registered cylinders
to suit individual requirements (see Additional Features).
Technical
- Voltage 24V D.C.
- Power consumption 22W
Ordering code S-11000
Note: If the locks are to be incorporated within a larger building management
system and the controller is not required, please contact our technical
department for any technical support.
S-11000 motorised multi-point panic
exit bolting device, left hand shown
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 119
Remote Release with Panic Exit - Bolting
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
L
LEO (external lockable handle), surface mounted
L
1
Recessed LEO (flush fitting) - tested to LPS 1175 security rating 3 protection
L2
Recessed LEO (flush fitting) with cylinder guard - tested to LPS 1175 security rating 4 protection
O0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
1
Cylinder - Kaba-20 (registered)
2
Cylinder - Assa Twin Combi 5800 (registered)
O
O
O5
Cylinder - Medeco m3-ARX (registered)
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O
10
Cylinder - Kaba quattro pluS (registered)
O
91
Cylinder - Abloy Protec (registered, diamond level)
Keeps included in this package:
Code
Description
SC
Outward-opening timber frame keep
SC1
Outward-opening timber frame keep and strike
SF
Dust excluding floor socket
Ordering Example:
S-11000-04-L1O5
Motorised multi-point panic exit bolting device, external key and handle provision (option L1),
fitted with a registered Medeco m3-ARX cylinder fitted (option O5).
Handing chart
Note: The handing and orientation code ‘04’ refers
to a ‘right hand’, outward opening door.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 120
Motorised Panic Exit - Deadlocking
Remote Release with Panic Exit
Remote release is achieved by releasing a solenoid deadlock and then activating a motor to retract the three bolts of
the Slimline device. Once retracted the door can be opened to provide external entry, either by a powered actuator
or pull handle (not supplied). The bolts are held by a restraint in their retracted position while the motor returns to it’s
parked position, enabling the door to automatically re-secure upon closure.
As a panic exit, the device can be released on the inside by means of operation via a panic bar, overriding the
deadlock and releasing the bolts in a single action. Again the bolts held in their retracted position by the restraint
whilst the door is open, which releases upon door closure to provide
automatically re-securement.
Typical applications:
• Disabled access
• Unmanned buildings
• Sterile entry area’s
• High security where bolt end-pressure protection is preferred
The motor controller provides outputs for bolt status monitoring,
which can be used within a building management system for
automatic door actuation, or sequencing of a number of doors.
The controller requires mains electrical input.
Suitable for doors up to 2,200mm tall, over height extensions are
available for taller doors. The supplied steel core fixings and bolt
keeps are suitable for an outward opening door hung in a timber
frame and a concrete floor.
Enhancements available include additional horizontal bolts if further
attack resistance is required, external key entry (Union as standard)
in the case of power failure, plus a choice of registered cylinders
from leading manufacturers (see Additional Features).
An external key option provides alternative access in the event of a
power failure; with a choice of registered cylinders to suit individual
requirements (see Additional Features).
Technical
- Voltage 24V D.C.
- Power consumption 22W
Ordering code S-11300
Note: If the locks are to be incorporated within a larger building management
system and the controller is not required, please contact our technical
department for any technical support.
S-11300 access controlled Slimline
deadlocking device with motorised bolt
retraction and panic exit, left hand shown
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
Remote Release with Panic Exit - Deadlocking
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
K
Description
2
External key release in case of power failure
0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
O
O1
Cylinder - Kaba-20 (registered)
O2
Cylinder - Assa Twin Combi 5800 (registered)
O
5
Cylinder - Medeco m3-ARX (registered)
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O10
Cylinder - Kaba quattro pluS (registered)
O91
Cylinder - Abloy Protec (registered, diamond level)
P
Cylinder guard LPS 1175 security rating 3 protection for door thickness 42- 60mm
5
Cylinder guard LPS 1175 security rating 4 protection for door thickness 42- 60mm
P6
Cylinder guard LPS 1175 security rating 5 protection for door thickness 42- 60mm
U
Slave unit, 90 degree and continue - additional bolt above handle
P
U
1
Slave unit, 90 degree and continue - additional bolt below handle
Keeps included in this package:
Code
Description
SC
Outward-opening timber frame keep
SC1
Outward-opening timber frame keep and strike
SF
Dust excluding floor socket
Ordering Example:
S-11300-04-K2O5P Multi-point panic exit deadlocking device with motorised bolt release, external key and
handle entry (option K2), an Medeco m3-ARX registered cylinder (option O5)protected by a
cylinder guard to LPS 1175 security rating 3 (option P).
Handing chart
Note: The handing and orientation code ‘04’ refers
to a ‘right hand’, outward opening door.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 121
Custom Locks
Multi-point
12.15
page 122
Motorised Emergency Exit - Deadlocking
Remote Release with Emergency Exit
Remote release is achieved by releasing a solenoid deadlock and then activating a motor to retract the three bolts of
the Slimline device. Once retracted the door can be opened to provide external entry, either by a powered actuator
or pull handle (not supplied). The bolts are held by a restraint in their retracted position while the motor returns to its
parked position, enabling the door to automatically re-secure upon closure.
As an emergency exit, the device can be released on the inside by operating a lever handle, that overrides deadlock
and releases the bolts in a single action. Again the bolts are held in their retracted position by the restraint whilst the
door is open. The restraint releases upon door closure to provide automatically
resecurement.
Typical applications:
• Disabled access
• Unmanned buildings
• Sterile entry areas
• High security where bolt end-pressure protection is preferred
• Combined remote access with emergency exit to BSEN 179: 2008,
CE marked
The motor controller provides outputs for bolt status monitoring, which can
be used within a building management system for automatic door actuation,
or sequencing of a number of doors. The controller requires mains
electrical input.
The system is suitable for doors up to 2,200mm tall. Extension kits are
available for taller doors. The supplied steel core fixings and bolt keeps are
suitable for an outward opening door hung in a timber frame and a
concrete floor.
Enhancements available include additional horizontal bolts if further
attack resistance is required, external key entry (Union as standard) in the
case of power failure, plus a choice of registered cylinders from leading
manufacturers (see Additional Features).
Technical
- Voltage 24V D.C.
- Power consumption 22W
Ordering code S-11305
Note: If the locks are to be incorporated within a larger building
management system and the controller is not required, please
contact our technical department for any technical support.
S-11305 access controlled
Slimline deadlocking
device with motorised bolt
retraction and emergency
exit, left hand shown
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
Remote Release with Emergency Exit - Deadlocking
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
K2
External key release in case of power failure
0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
1
O
Cylinder - Kaba-20 (registered)
O2
Cylinder - Assa Twin Combi 5800 (registered)
O5
Cylinder - Medeco m3-ARX (registered)
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O
O
10
Cylinder - Kaba quattro pluS (registered)
O91
Cylinder - Abloy Protec (registered, diamond level)
P
Cylinder guard LPS 1175 security rating 3 protection for door thickness 42 - 60mm
P
5
Cylinder guard LPS 1175 security rating 4 protection for door thickness 42 - 60mm
P
6
Cylinder guard LPS 1175 security rating 5 protection for door thickness 42 - 60mm
U
Slave unit, 90 degree and continue - additional bolt above handle
U1
Slave unit, 90 degree and continue - additional bolt below handle
Keeps included in this package:
Code
Description
SC
Outward-opening timber frame keep
SC1
Outward-opening timber frame keep and strike
SF
Dust excluding floor socket
Ordering Example:
S-11305-04-K2O5P Multi-point panic exit deadlocking device with motorised bolt release, external key and
handle entry (option K2), an Medeco m3-ARX registered cylinder (option O5) protected by
a cylinder guard to LPS 1175 security rating 3 (option P).
Handing chart
Note: The handing and orientation code ‘04’ refers
to a ‘right hand’, outward opening door.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 123
Custom Locks
Cashiers Office Lock
12.15
page 124
Cashiers Office Lock - Safe Exit
Automatic Deadlocking with Emergency Exit
A covered Slimline multi-point system automatically re-secures upon door closure. External key lock release and
lever handle entry; an internal green lever handle provides for a single handed emergency exit to BS EN 179: 2008.
• Three 15mm hardened steel bolts each with a throw of 25mm
• Concealed (covered) system
• Key and lever handle entry facility
• Automatic re-securement upon door closure
• Single handed emergency exit to BS EN 179: 2008,
CE marked
Slimline devices are successfully tested to high levels
of Security, Fire, Blast and Ballistic protection and
tested to over a million cycles.
Suitable for doors up to 2,200mm tall, over height
extensions are available for taller doors. The supplied
steel core fixings and bolt keeps are suitable for an
outward opening door hung in a timber frame and a
concrete floor.
Enhancements available include electric monitoring
of the lock status, a choice of registered cylinders
and cylinder guards, plus additional horizontal bolts
if further attack resistance is required (see Additional
Features).
Finish - grey-white RAL 9002 leatherette powder
coating co-ordinated with bright zinc plate.
Ordering code S-11004
Slimline ‘Cashiers Office’ lock,
left hand shown
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Cashiers Office Lock
12.15
Automatic Deadlocking with Emergency Exit
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code:Code
Description
N
Electric monitoring of the lock status
O
0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
O
1
Cylinder - Kaba-20 (registered)
O
2
Cylinder - Assa Twin Combi 5800 (registered)
O
5
Cylinder - Medeco m3-ARX (registered)
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O
10
Cylinder - Kaba quattro pluS (registered)
O
91
Cylinder - Abloy Protec (registered, diamond level)
P
Cylinder guard LPS 1175 security rating 3 protection for door thickness 42 - 60mm
5
Cylinder guard LPS 1175 security rating 4 protection for door thickness 42- 60mm
P6
Cylinder guard LPS 1175 security rating 5 protection for door thickness 42- 60mm
U
Slave unit, 90 degree and continue - additional bolt above handle
U1
Slave unit, 90 degree and continue - additional bolt below handle
P
Keep supplied in this package include:
Code
Description
SC
Outward-opening timber frame keep (2 No.)
SC1
Outward-opening timber frame keep and strike
Ordering Example:
S-11004-04-NO5P6
Multi-point automatic deadlocking device with external key and lever handle entry with a
registered Medeco m3-ARX cylinder (option O5), protected by a cylinder guard (option P6),
an inside lever handle provides an emergency exit to BS EN 179:2008.
Handing chart
Note: The handing and orientation code ‘04’ refers to a
‘right hand’, outward opening door.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 125
Custom Locks
Multi-point
12.15
‘Solent’ High Security Dual Protection Multi-point Lock
Highest Security with Emergency Exit to BS EN 179: 2008
High performance, multi-functional with break glass and anti-tamper protection. Providing emergency exit at
all times.
Specification
Three 15mm diameter hardened steel bolts, each with 25mm throw
Emergency exit, independently type-tested to BS EN 179: 2008.
Fitted with a Slimline multi-point deadlock to provide automatic re-securing
upon door closure and end-pressure attack resistance to all bolts.
Anti-tamper break-glass with double over-lock protects against the highest
levels of threat.
Slimline devices are successfully tested to high levels of Security, Fire, Blast
and Ballistic protection and tested to over a million cycles.
Prime Entry Lock Selection
• S&G 8550 combination lock
• S&G 2740 electro-mechanical lock
• Tamar key operated lock
• Kaba Mas Auditcon 552 electronic lock
• Kaba Mas X-09 electronic lock
• ILD key operated lock
Optional Enhancements
• Access control for daytime staff
• Electric monitoring of bolt status
• Visual breach indicator
• Genous secondary overlock with full audit trail
External Operators (example)
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 126
Custom Locks
Multi-point
12.15
page 127
Features & Accreditations
The ‘Solent’ multi-point lock has been specifically designed
to offer the highest level of both physical and surreptitious
protection and has been successfully type tested to BS
EN 179: 2008. It provides a one-handed means of exit in
the case of an emergency and automatically returns to its
original status after each exit.
The ‘Solent’ lock is from the Surelock range of high
performance multi-point locking systems, which have
been successfully tested to the largest combination
of Security, Fire, Blast and Ballistic certifications and
accreditations. The design and materials used ensure a
robust product, built to endure heavy usage and hostile
environments, tested to over a million cycles.
The ‘Solent’ lock is a single lock for all purposes, and
negates the need for repairs to a door each time an
alternative lock is fitted to suit a change of operation.
Prime Entry Lock Selection
S&G 8550 - mechanical combination lock,
UL listed group 1 VdS Class 2, CEN B, DNV
3492, CNPP A2P B/E; 1,000,000 theoretical
combinations.
TAMAR - key operated lock with cylinder guard
protection and microswitch provision for lock
status monitoring. ‘Genous’ option provides a
secondary overlock plus full audit trail facility.
SSG ref: 25.42.1753
S&G 2470 - High-Security electromechanical
combination lock, meets Federal Specification
FF-L-2740A, GSA approved, single and dual
user entry; sets electronically and dialed
mechanically.
KABA MAS X-09 - limited view LCD display
self-powered electromechanical combination
lock. Three modes of user access, plus
audit facilities.
KABA MAS AUDITCON 552 - selfpowered
combination lock, fitted with anti-spy shield,
99 users, time delay and audit facilities.
ENV1300 Class B Vds Class 2.
GSA approved for use on security vault doors.
ILD - key operated high security lock
developed by the Department of Defense Lock
Program. The ILD is approved by DoD for use
on doors to weapon storage structures.
OSD31 and DoD approved.
Note: Most combination locks with the standard industry or UK Government mounting footprint can be fitted, upon request.
Technical Information
• 15mm hardened bolts with a 25mm throw, suitable for
door heights up to 2,200mm, with extensions available
for higher doors.
• Bi-directional restraint suitable for both inward and
outward-opening doors, with easy adjustment for
positive engagement.
• Toughened glass plate with overlock providing
surreptitious anti-tamper protection.
• Ergonomic green lever handle on the inside to provide
a one-handed means of exit to BS EN 179: 2008.
• Automatic re-securement of the multi-point bolting
system ensures that any fire, blast, ballistic certification
to the door is not compromised.
• Powder-coated Laser Grey finish, co-ordinated with
bright zinc plate.
• End-pressure attack resistance to all bolts.
• The Solent lock is handed, please refer to the handing
chart when specifying.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 128
Performance Suitability
Surelock multi-point locks have been successfully tested on a variety of high performance doorsets, aimed at
the following standards:
SECURITY
LPS 1175 Security Rating 2, 3, 4 and 5.
FIRE
BS 476 part 22:1987 doorsets, 30, 60 and 90 minutes.
BLAST
‘Protected Spaces’; ratings ‘C15’ and C25’.
BALLISTICS
BS EN 1522:1999, FB1-FB7 and FSG.
SAFETY
BS EN 179:2008 (Emergency Exit) classification: 37601442A.
Optional Enhancements
Access control for daytime staff
Fixings & Keeps
OPTION R5
Access control entry with emergency
exit, 12V d.c. solenoid, energise to
unlock (fail secure as standard), 6.3W
power consumption.
OPTION R6
Access control entry and exit, 12V d.c.
solenoid, energise to unlock*
(fail secure as standard), 6.3W
power consumption.
Supplied with steel core fixings and keeps to suit an
outward-opening timber core door hung in a timber
frame, standing on concrete floor. Alternative keeps
are available for steel doors and frames, plus inward
opening doors.
Ergonomic Green
Lever Handle
Additional enhancements for
access control:
OPTION K2
External key release in case of
power failure.
OPTION N
Electric monitoring of daytime
lock status.
OPTION O(n)
Choice of cylinder manufacturers,
or customers own supply;
(n) = manufacturer variant.
OPTION P
Cylinder protection.
Additional (optional) Enhancements
OPTION E(n)
Over-height door extensions;
(n) = 1000mm variant.
OPTION M
Electric monitoring of bolt status.
OPTION T
Lower slave unit, horizontal bottom bolt
securing into the door frame.
OPTION V
Visual indicator flag, identifying breach,
with electric monitoring.
Visual Breach
Indicator
(optional)
‘Genous’
An option available with the Tamar key operated lock.
This provides a secondary overlock within the Tamar
lock, providing resistance to physical attack and
surreptitious anti-tamper protection
Genous is a unique electronic chip embedded in the
key bow. The chip is read as the key is inserted into
the cylinder, an authorised chip releases the solenoid
overlock and permits the correctly cut key to operate
and release the lock.
Genous enables up to 10,000 users and 10,000
events, it can be a stand-alone single door, or
networked for remote management. Genous
provides a full and in-depth audit trail facility with
secure data storage.
‘Genous’ key with embedded
electronic chip
* This option provides for controlled
entry and exit, removing the
emergency exit feature at all times.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 129
Solent Specifying Guide
Four Steps to Specifying
1.
K2 External key release
in case of power failure
Select the Solent lock code according to the
prime entry lock required, as follows:
S-11650 S&G 8550 mechanical combination lock
‘S-11650’ S&G 8550 mechanical
combination prime entry lock
S-11485 S&G 2740 electro-mechanical lock
S-10801 Kaba Mas Auditcon 552 electronic lock
S-11125 Tamar key driven lock
S-11650-04-K2R5
S-11160 Kaba Mas X-09 electronic lock
S-11170 ILD key driven lock
Note: Most combination locks with the standard
industry or UK Government mounting footprint lock
can be fitted, upon request
2.
‘04’ Right-hand,
outward opening
Identify handing and door opening direction
codes (see handing chart)
R5 Access control
daytime entry with
emergency exit
04 = Right-hand outward opening
05 = Left-hand outward opening
Handing chart
07 = Right-hand inward opening
08 = Left-hand inward opening
3.
Append any enhancement codes
Refer to ‘Optional Enhancements’.
4.
Alternative fixings or keeps
Advise any special door and frame details for
appropriate keeps to be selected.
Technical Support Help Line
Quality Statement
For further help or advice, please contact our
technical sales department on:
Our continued commitment to product excellence
and accreditation to ISO 9001: 2008 throughout the
group ensures unequalled customer satisfaction and
is our ‘Seal of Excellence’.
+44 (0) 118 977 2525
sales@surelock.co.uk
In accordance with our policy of continued
development and improvement we reserve the
right to make changes in design and specifications
without notice.
Surelock McGill Ltd
26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel:
+44 (0) 118 977 2525
Email: sales@surelock.co.uk
Fax:
+44 (0) 118 977 1913
Web:
www.surelock.co.uk
ASSESSED TO ISO 9OO1:2008
CERTIFICATE NO. 516
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Multi-point
12.15
page 130
Fleet Lock
Double Swing-bolting with Emergency exit
An encased heavy duty twin bolting device, deadlocked by a high security lock complete with ant-tamper overlocks
to provide surreptitious protection, whilst retaining an emergency exit facility.
The Fleet Lock can be fitted to most security doors. There is a choice of locks to suit customers’ specific operational
requirements, including:
• S&G 8550 combination lock
• S&G 2740 combination lock
• Kaba Mas Auditcon 552 electronic lock
• Tamar key driven lock
Typical information:
• Overall case height 1465mm by 150mm wide
• Two swing bolts 60mm by 10mm swing bolts with a 60mm throw
• Inset keeps to suit an outward opening door hung in a timber frame
Finish
Goose grey powder coating co-ordinated with bright zinc plate.
Ordering codes:
DL300-2000 Euro-profile cylinder provision (cylinder not included)
DL300-4000 Kaba Mas Auditcon 552 electronic lock
DL300-5000 Tamar key operated lock
DL300-7000 S&G 8550 combination lock
DL300-8000 S&G 2740 electro-mechanical lock
Fleet swing bolt device
with emergency exit
Handing chart
Inset keep arrangement
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Blast Protection
12.15
Traditional ‘G1’
Modular solutions for blast protection and containment
The heavy-duty traditional ‘G1’ range has 25mm diameter mild steel bolts, each with a throw of 32mm. Larger
bolt ends are available in a choice of materials, including mild steel, stainless steel (316) and EN24T (nickel
chrome molybdenum steel).
Three bolts, top, bottom and horizontal, with optional slave units to provide
additional bolting positions. Supporting bolt guides are included, with frame
keeps available, if required, to suit the needs of a blast application.
A selection of enhancements are available to meet most operational needs,
as follows:
• Key release
• Solenoid lock release
• Motor driven bolt retraction
• Automatic re-securement upon door closure
• Electric monitoring of bolt and lock status
• Panic or emergency exit provision
Slave units provide additional bolts to suit the
number and positional needs of an application
Traditional ‘G1’ range shown with
additional top and bottom slaves
to provide 5-point
5-po
securing
Panic bar example,
providing a one-handed
means of exit
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 131
Custom Locks
Blast Protection
12.15
page 132
Peak Permissible Blast Loads
The following schedule is a guide only of ‘Peak Permissible Blast Loads’ calculated for a range of door sizes
secured with a varied number of bolts and differing materials.
The assessments for each door and bolt configuration are based on a number of assumptions, such that the
figures should be used for guidance only, it is assumed that:
Q The
load is distributed equally (50/50) between the hinge side and the leading edge of the door
Q The
hinge and door frame is capable of resisting the applied load
Q The
door leaf is substantially stiff such that the load is transmitted directly to the support points
(ie. hinge on one side and bolts on the other)
Q The
load is evenly distributed on all bolts and the position of the horizontal bolt has no effect on load
distribution - in a normal door design we have considered that the horizontal bolt would take load from half
of the door area above and below in a 3-bolt group. The top and bottom bolts would therefore receive half
the load applied to the central bolt, with the central bolt being the limiting factor
Q The
blast load is limited by the shear capacity of one bolt - therefore the total allowable blast load is factored
by the number of bolts
Q These
figures are the ultimate capacities, with an allowance for dynamic load factors
Door Schedule - Permissable Peak Blast Loads (kN/m2)
Door 2500mm x 1000mm (8’ 2” x 3’ 3”)
Bolt Diameter
Fitted with 2 vertical bolts
Fitted with 2 vertical bolts plus 1 horizontal
Metric
Imperial
Mild Steel
Stainless Steel
316
EN24T
Mild Steel
Stainless Steel
316
15mm
0.590”
17.5
35.4
43.3
23.6
53.1
65.0
20mm
0.787”
31.1
63.0
77.0
46.7
94.5
115.5
25mm
0.984”
48.6
98.4
120.3
73.0
147.6
180.5
40mm
1.578”
124.5
251.9
308.0
186.7
377.9
461.5
EN24T
Door 3000mm x 1250mm (9’ 10” x 4’ 1”)
Bolt Diameter
Fitted with 2 vertical bolts
Fitted with 2 vertical bolts plus 1 horizontal
Metric
Imperial
Mild Steel
Stainless Steel
316
EN24T
Mild Steel
Stainless Steel
316
EN24T
15mm
0.590”
11.7
23.6
28.9
17.5
35.4
43.3
20mm
0.787”
20.7
42.0
51.3
31.1
63.0
76.9
25mm
0.984”
32.4
65.6
80.2
48.6
98.4
120.3
40mm
1.578”
83.0
167.9
205.3
124.5
251.9
308.0
Door 4000mm x 1500mm (13’ 1” x 4’ 11”)
Bolt Diameter
Fitted with 2 vertical bolts
Fitted with 2 vertical bolts plus 1 horizontal
Mild Steel
Stainless Steel
316
EN24T
Mild Steel
Stainless Steel
316
EN24T
0.590”
7.3
14.8
18.0
10.9
22.1
27.1
0.787”
13.0
26.2
32.1
19.5
39.4
48.1
25mm
0.984”
20.3
41.0
50.1
30.4
61.5
75.2
40mm
1.578”
51.9
105.0
128.3
77.8
157.4
192.5
Metric
Imperial
15mm
20mm
The above table is a guide to the permissible ‘Peak’ blast loads a device could provide, this is of course dependant on the complete door and
frame design, the method of fitting, including the hinge side of the door.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Blast Protection
12.15
page 133
Espagnolette Mullion 3-Way
‘EM3’ Range of Heavy-duty Encased Locks
The EM3 range comprises heavy duty multi-point devices for securing and providing protection against the higher
levels of physical attack and blast protection. Espagnolette Mullins are designed for single doors or the active leaf of
a double doorset and has a wide choice of Surelock enhancements available to suit specific requirements.
Three 25mm diameter stainless steel bolts, each with a 32mm throw are encased in a strong, steel fabricated case
to provide a balanced level of support for each bolt.
Entry and exit operational choices are almost limitless, and use the same coding methods for the Slimline range,
as follows:
Ordering codes are self-creating according and follow a similar pattern to
the Slimline range, as follows:
‘EM3’ Espagnolette Mullions, three-point bolting, followed by the chosen
entry and exit codes
Exit
Entry
Code
No entry
Key driven
Electric
release
Combination
lock
0
1
2
3
Code
No exit
Key driven
Electric
release
Turnknob
release
Emergency
exit
0
1
2
3
5
A selection of Enhancements can be added and again follow a similar
pattern and description as Slimline (see Additional Features).
Keeps and fixings need to be ordered separately to suit door and frame
detail, or will interlock with a two-point Espagnolette Mullion fitted to the
passive leaf of a double door set.
Specification:
• 25mm diameter stainless steel bolts with 32mm throw
• Stainless steel lever handle(s)
• Spring biasing to throw bolts, adjustable on site
• Suitable for door heights from 1,900mm to 2,400mm, over height
extensions available for higher doors
Finish - goose grey powder coating co-ordinated with stainless steel
bolts, escutcheons and lever handles.
EM303 three-point
Espagnolette Mullion,
left hand shown
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Blast Protection
12.15
‘EM3’ Range of Heavy-duty Encased Locks
General Dimensions of a three-point Espagnolette Mullion device:
Ordering Example:
EM313-04-K15O5P6
Three-point Espagnolette mullion with external key entry, an Medeco m3-ARX registered
cylinder (option O5) protected by a cylinder guard to LPS 1175 security rating 5, an
internal turnknob lock release, with shroud (option K15) and lever handle.
Handing Chart
Note: The handing and orientation code ‘04’
refers to a ‘right hand’, outward opening door.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 134
Custom Locks
Blast Protection
12.15
page 135
Espagnolette Mullion Two-Way
‘EM2’ Range of Heavy-duty Encased Locks
The EM2 range comprises heavy duty two-point devices for securing the passive leaf of a double door and providing
protection against the higher levels of physical attack and blast protection.
Two 25mm diameter stainless steel bolts each with a 32mm throw are encased in a strong, steel fabricated case to
provide a balanced level of support for each bolt.
Entry and exit operational choices are almost limitless, with self-creating ordering codes in-line with the latest
Surelock coding system, as follows:
Ordering code: ‘EM205’ Espagnolette Mullion, two-point bolting with
removable plant key handle on the inside, non-handed.
Keeps and fixings need to be ordered separately to suit door and
frame detail.
Specification:
• 25mm diameter stainless steel bolts with 32mm throw
• Removable plant handle
• Spring biasing to throw bolts, adjustable on site
• Suitable for door heights from 1,900mm to 2,400mm, over height
extensions available for higher doors
• Non handed
Finish - goose grey powder coating co-ordinated with stainless steel
bolts, escutcheons and lever handles.
EM205 two-point
Espagnolette Mullion
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Blast Protection
12.15
‘EM2’ Range of Heavy-duty Encased Locks
General Dimensions of a two-point Espagnolette Mullion device:
Ordering Example:
EM205-00-MW
Heavy duty two-point Espagnolette Mullion with removable plant handle, electric
monitoring of the bolt status (option M) and steel core fixing (option code W).
Note: The handing and orientation code ‘00’ denotes non-handed.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 136
Custom Locks
Blast Protection
12.15
‘BL’ Blast Protection Mullions
‘BL’ Range of Blast Protection Devices
A range of fully-encased heavy-duty mullions designed to withstand blast pressures resulting from an explosion.
A choice of the material, number and size of bolts enables the selection of a device to withstand specific blast
pressures. Typical applications are:
• Storage of munitions
• Petrochemical explosion
• Terrorist attack
The bolt guides and support blocks are proportionately matched to the size and material to the bolts to maintain
appropriate strength and protection throughout the the build of each device.
Blast mullions can be paired together to provide additional bolts along the
top and bottom edges of a door. This enables further all round support of
the door to meet increased requirements that might exist, for example, in the
case of wide or double doors.
Entry and exit operational choices are almost limitless, and use similar
coding methods to the Slimline range, as follows:
Ordering codes follow a similar pattern to the Slimline range, so that, for
example, the order code BL415 indicates a blast protection mullion with
4 point bolting (as illustrated) Key Entry, and Emergency Exit.
Exit
Entry
Code
No entry
Key driven
Electric
release
Combination
lock
0
1
2
3
Code
No exit
Key driven
Electric
release
Turnknob
release
Emergency
exit
0
1
2
3
5
A selection of Enhancements can be added, again following the similar
pattern and descriptions as Slimline (see Additional Features).
Keeps and fixings need to be ordered separately to suit door and frame
detail and blast protection requirement.
Handing chart
Blast Protection Mullion, twin
locking with internal key and
turnknob release, left hand shown
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 137
Custom Locks
Blast Protection
12.15
page 138
Bespoke Blast Solutions
Special Motorised Applications
Over 1000kgs of high quality engineering enable special multi-point securing devices to be supplied from a
modular design concept. This enables a choice as to the number of bolts and material, their position and throw
to meet almost any threat protection.
Operational functionality can be as simple or complex as a site requires, including deadlocking to prevent
forced bolt retraction with key or access control lock release, remote or touch-bar motorised bolt actuation,
lock and bolt status monitoring and if required, manual release in the case of power failure.
Example of a 1,000kg locking system:
•
•
•
•
Six 100mm diameter bolts
Motorised bolt actuation
Remote or touch bar release
Manual safety release in case of power failure
Blast Containment
The illustration opposite shows a ‘Threat Containment
Unit’. This has been developed to meet problems
such as suspect abandoned luggage at airports.
The system uses Surelock McGill bespoke designed
bolting modules to meet the blast threat and is
designed for robotic rather than human intervention.
‘Threat Containment Unit’
Photograph by kind permission of
Aigis Blast Protection
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Barrier Bolt
12.15
Barrier Bolt
Horizontal Two-point Bolting Device
The Barrier bolt is a horizontal two point bolting system that enables a door to be swiftly secured against imminent
attack. The bolting system provides high resistance to bolt-end pressure from a crowbar or similar tool without the
use of a key operated deadlock.
The two 15mm stainless steel bolts with a throw of 70mm each. When thrown the bolts automatically provide
resistance to bolt end-pressure attack.
• Horizontal, surface mounted, two-point bolting
• 15mm stainless steel bolts
• 70mm bolt throw
• Swift security against a pending attack
• Automatic resistance to bolt end-pressure, without the need of a key
The supplied keeps are suitable for an outward opening door hung in a timber frame. A choice of fixings are
available to suit door material and construction (see Additional Features).
Finish - grey-white RAL 9002 leatherette powder coating co-ordinated with bright zinc plate.
Ordering code S-9844
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 139
Custom Locks
Barrier Bolt
12.15
page 140
Horizontal Two-point Bolting Device
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
M
Electric monitoring of bolt status
W
W
Machine screws with steel dowels
2
Surface fixing by coach screws
W3
Surface fixing by machine screws
Keeps included in this package:
Code
Description
SC
Outward-opening timber frame keep x 2 No.
Ordering Example:
S-9844-M
Two-point horizontal bolting device with electric monitoring of bolt status (option M).
Surelock’s aspirations to provide customers with the correct solution to meet an ever expanding complexity of
operational requirements have once again proven to be successful. If you have a specific operational requirement,
no matter how complex, we are pleased to provide a solution.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Moorgate Lock Bolt
12.15
page 141
Moorgate Lock
Auto-locking Twin Hook Lock with Emergency Exit
The Moorgate lock is designed for securing sliding or hinged gates, doors and hatches. It is a double hook lock.
Upon closure the two metal hooks automatically engage and deadlock into a heavy-duty protective keep. A choice
of mild steel or manganese steel hooks for higher attack protection are available (refer to ordering codes below).
A choice of operation includes a lever handle to provide an emergency exit, or the addition of an outside key
lockable handle. Both sides can be key locked if an emergency exit is not required. The key locks the handle on the
side the cylinder is fitted.
Scandinavian oval cylinder types are used (Union as standard), with a choice of alternative cylinders from most
leading manufacturers (see Additional Features).
Typical information:
• Two 10mm thick steel hook bolts at 440mm centres,
with 45mm projection
• Automatic double hook deadlocking
• Robust all steel encased mechanism
• All steel double keep arrangement
• Supplied with a pair of lever handles to enable
operation on one or both sides
• Free exit supplied as standard
• Key cylinder option on one or both sides
Finish - Zinc plated and passivated with stainless
steel handle(s)
Ordering code S-11120
S-11120-001 (manganese hooks)
‘Moorgate’ double hooking
deadlock with emergency exit
and key cylinder enhancement
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Moorgate Lock Bolt
12.15
page 142
Auto-locking Twin Hook Lock with Emergency Exit
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
K
Key retained in unlocked position
K
1
Inside key
K2
Outside key
O0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
O
1
Cylinder - Kaba-20 (registered)
O
2
Cylinder - Assa Twin Combi 5800 (registered)
O5
Cylinder - Medeco m3-ARX (registered)
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
Cylinder - Kaba quattro pluS (registered)
O
91
Cylinder - Abloy Protec (registered, diamond level)
431
O
10
Ordering Example:
S-11120-KK2
Moorgate twin-hook lock with external key locking and key retained in the unlocked
position (options K & K2) and internal lever handle emergency exit.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Lodddon P
12.15
page 143
Loddon Security Night Latch
Stainless Steel Auto Deadlocking
The Surelock McGill Loddon is a Deadlocking Night Latch with:
Stainless Steel construction
25 mm Bolt Throw
The security of key entry
Single-Pull Lever Action Exit
High level of physical security protection
LPCB SR 2 approval on selected doorsets
The Loddon is compatible with standard Rim Cylinders from
leading manufacturers. It is supplied with a keep for inward
opening doors and steel core fixings. The Loddon can usually
be retrofitted where Rim Locks need upgrading for added
protection. Our Technical Sales Department will provide advice on
compatibility.
Packages are available that include an SMC1 Cylinder Housing,
a choice of selected high security cylinders, plus bolt through
sandwich fixing into an external heavy duty Stainless Steel
Escutcheon Plate. This significantly increase the robustness and
security of both new and existing doors.
Entry: key cylinder to release
Retrofit replacement for
Ingersoll SC71 & SC73
Night-Latches
Exit: pull lever to retract bolt
Ordering Codes:
LP115 –
Loddon Nightlatch with provision for key entry, pull lever to exit
LP113 –
As above with additional Bolt Hold-Back Snib
SM17n –
Loddon package - with external cylinder protection, heavy duty escutcheon, provision for key entry
and pull lever to exit
SM17d –
Loddon package - as above with additional Bolt Hold-back Snib
Note: Key Cylinders to be ordered separately
Loddon
Nightlatch LP115
Loddon package
SM17n
On selected doors
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
SMC1 Cylinder Replacement Housing
12.15
SMC1 Cylinder Replacement Housing
Replacement Housing for a Straight Forward Simple Retro-fit
It has previously been difficult to replace the Ingersoll Rim Cylinder with
another type because of it’s unique footprint. The Surelock SMC1
addresses this problem making it easy to upgrade to a modern
high-security type. Using the SMC1 ensures:
Quick easy cylinder conversion to that of most
leading manufacturers
Cylinder protection
An attractive polished Stainless Steel finish to
the visible face
The SMC1 is a Cylinder Protection Housing that has
the same footprint and central tang arrangement as
the Ingersoll Rim Cylinder but which provides a secure,
protected mounting for KIK Cylinders from most leading
manufacturers such as:
the Abloy Protec2,
the Kaba Quattro S, or
the Medeco m3-ARX
Direct replacement for an
‘Ingersoll SC1’ Cylinder
Ordering Codes:
SMC1 – Cylinder Replacement Housing
Note: Key Cylinders to be ordered separately
(refer to Surelock McGill ‘Enhancement’ codes for cylinder
variants), e.g.
Medeco m3-ARX
– Code ‘05’
Kaba Quattro S
– Code ‘12’
Abloy Protec2
– Code ‘91’
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 144
Custom Locks
Single-point
12.15
page 145
Single point
Ribble Lock
High Security Single-Point Deadlock
The Surelock Ribble lock provides a high level of anti-tamper protection against surreptitious breach. The lock has
a high security BS EN 1303 6-2, approved cylinder. Each cylinder has a new unique key differ and is provided
with two keys.
The key is retained in the unlocked position. This ensures that the lock is always thrown when the key is removed.
A cylinder guard is built in to provide resistance in the case of an attack. A micro switch enables electric monitoring of
the locked status.
The dual mounting footprint of the device conforms to both the UK, European and US fixing patterns for combination
locks. This means it is easy to retrofit in place of existing locks that conform to either standard such as the Mk4
Manifoil combination, the Mersey lever key, the Kaba Mas Auditcon and X09 electronic combination locks.
Specification:
• Dual mounting footprint, for retrofitting with UK,
European and US combination locks
• High security BS EN 1303 6-2 cylinder
• Key retained in the unlocked position
• A unique key differ for each lock
• Two keys provided for each lock
• Cylinder guard and packing provide for cylinder
projections between 17.5mm and 23.5mm
Ribble lock with dual
mounting footprint
• Lock status monitoring provision
Ordering code: RL100
Packing to suit cylinder
projection between
17.5mm to 23.5mm
BS EN 1303 class 5 cylinder
Surelock cylinder guard with
rotating anti-drill disc
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Single-point
12.15
page 146
High Security Single-Point Deadlock
‘off-set Ribble’ - easy cupboard replacement for the Mersey lock
The ‘off-set Ribble’ provides effortless replacement to the Mersey lock. The cylinder is flush fitted into the lock
negating the need to replace any existing glass overlock plates. The bolt datum position remains the same as the
standard Ribble and the dual mounting footprint is retained.
Each lock is supplied with two Medeco m3-ARX extended keys, each to a new unique differ.
‘Genous’ Additional Feature (optional):
The Ribble lock can be fitted with Genous access control. The Genous chip-in-key technology and solenoid driven
overlock restricts access to authorised keys only. The authorisation is programmable and the Genous system logs all
authorised and unauthorised operations at the lock. The secure Genous log provides a full audit trail with date, time
and user ID.
The Genous system records up to 10,000 events and provides a choice of different key status levels. It can be a
stand-alone intelligent unit, or linked to into a Genous network, which can include door systems and asset cabinets.
Software is available for linking either to a PDA or a laptop computer. Genous technology can also be networked over
single- or multiple buildings.
Genous Processing Unit
Genous intelligent key
2-drawer cabinet fitted
with a Ribble lock and
Genous technology
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Single-point
12.15
page 147
Tamar Lock
High Security Single-Point Deadlock
The Surelock Tamar lock provides a high level of anti-tamper protection against surreptitious breach. The lock has
a high security BS EN 1303 6-2, approved cylinder. Each cylinder has a new unique key differ and is provided
with two keys.
This cylinder is protected by a heavy-duty manganese cylinder guard fitted with a 6mm cobalt spinning disc to protect
against drilling and the higher levels of attack. It is tested and approved to LPS 1175 Security Rating 5. A built-in
micro switch enables electric monitoring of the lock.
The dual mounting footprint of the device conforms to
both the UK, European US fixing patterns for combination
locks. This means it is easy to retrofit in place of an existing
combination lock.
Specification:
• Dual mounting footprint, for retro-fitting with UK,
European and US combination locks
• High security BS EN 1303 class 5 rim cylinder
• A unique key differ for each lock
• Two keys provided for each lock
• Heavy-duty cylinder guard to LPS 1175 Security Rating 5
• Lock status monitoring provision
Ordering code: TM100
Heavy-duty manganese
cylinder guard with
cobolt anti-drill disc
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Single-point
12.15
page 148
High Security Single-Point Deadlock
‘Genous’ Additional Feature (optional):
The Tamar lock can be fitted with Genous access control. The Genous chip-in-key technology and solenoid driven
overlock restricts access to authorised keys only. The authorisation is programmable and the Genous system logs all
authorised and unauthorised operations at the lock.
The secure Genous log provides a full audit trail with date, time and user ID. It records up to 10,000 events and
provides a choice of different key status levels.
Genous can be implemented as a stand-alone intelligent unit, or linked to into a Genous network, which can include
door systems and asset cabinets. The Genous device can be accessed using a PDA or laptop computer. Networking
can cover single or multiple buildings.
Genous Processing Unit
Genous intelligent key
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Single-point
12.15
page 149
Fraser Bar
Single Point Emergency Exit Device
The Fraser Bar meets the latest European emergency exit requirements of BS EN 179: 2008.
Operation:
The emergency exit is activated by pushing the green push-pad in the direction of the arrow. This releases the
single bolt.
After activation the bolt is held in the retracted position and a red activation panel is displayed. A key is required to
re-set the Fraser Bar so the device complies with the requirements for high security (HS) devices with surreptitious
anti-tamper protection.
Monitoring:
A micro switch is fitted to provide electric monitoring of the bolt.
Fraser Bar, showing ‘red’
activation panel
Specification:
• 70mm by 10mm steel bolt with 50mm throw
• Independently type tested to BS EN 179: 1988
• Bolt secured in retracted position after activation, requiring key for re-setting
• Electric monitoring of bolt status
• Steel core fixing
• Supplied with a keep for an outward opening door hung in a timber frame Additional Features (optional):
• Keeps available for double doors, inward opening doors and steel frames Finish - grey-white RAL 9002 leatherette
powder coating co-ordinated with bright zinc plate.
Ordering code: EX500
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Single-point
12.15
AC850 Motorised Lock
Intelligent Remote Locking
The AC850 is a high security, heavy duty motorised lock, providing controlled release together with a selection
of operating modes to suit individual building applications. This lock can be integrated with most access control
systems to provide the required level of authorisation, remote release and emergency exit.
Specification:
• Surface mounted
• Automatic deadlocking upon door closure
• 25mm x 19mm hardened steel bolt x 25mm throw
• End thrust loading over 7 times BS 3621
• Lock status monitoring
• 24V D.C. rated motor, 180Ncm torque and 4W nominal power
consumption
• Supplied complete with steel core fixing
Each lock is supplied with a controller, programmed to provide the lock
functionality. This includes tamper monitoring, bolt and deadlock status,
timing of operations etc.
A selection of enhancements is available (see Additional Features).
There is also a choice of keeps, which need to be ordered separately.
AC850 motorised lock, left hand,
outward opening shown
Finish - grey-white RAL 9002 leatherette powder coating
coordinated with bright zinc plate.
Ordering code: AC850
Note: If the locks are to be incorporated within a larger building
management system and the controller is not required, please
contact our technical department for any technical support.
Illustration showing emergency
exithandle arrangement (option X)
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 150
Custom Locks
Single-point
12.15
page 151
AC850 - Intelligent Remote Locking
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
K
1
Internal cylinder (keyed alike to external cylinder -if selected)
K
4
Internal turnknob release with break dome protection
K
9
Internal turnknob release
K13
O
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
1
Cylinder - Kaba-20 (registered)
2
Cylinder - Assa Twin Combi 5800 (registered)
O
O
External key access; unprotected rim latch style cylinder - (Union as standard)
0
O5
Cylinder - Medeco m3-ARX (registered)
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O
10
Cylinder - Kaba quattro pluS (registered)
O
91
Cylinder - Abloy Protec (registered, diamond level)
P
W
Cylinder guard LPS 1175 security rating 3 protection for door thickness 42 - 60mm
2
X
Coach screw fixing
One handed means of exit by lever handle meeting BSEN 179: 2008
A selection of keeps are available to suit door opening direction, frame material and detail, these need to be
ordered separately, as follows:
Code
Description
SA.850
Metal frame, inward opening
SA1.850
Timber/Metal double door, inward/outward opening
SB.850
Metal frame, outward opening
SB.850
Timber frame, outward opening
SB.850
Timber frame, inward opening
Ordering Example:
AC850-04-K13O5PX
Motorised AC850 lock with external key and lever handle entry (option K13), a registered
Medeco m3-ARX cylinder in case of power failure (option O5), protected by a cylinder guard to
LPS 1175 security rating 3 (option P) and emergency exit provision (option X).
SC.850
Keep to suit an outward opening door hung in a timber frame.
Handing chart
Note: The handing and orientation code ‘04’ refers to a
‘right hand’, outward opening door.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Single-point
12.15
AC900 Motorised Lock
Intelligent Remote Locking
The AC900 is a high security, heavy duty motorised lock, providing controlled release together with a selection of
operating modes to suit prevailing requirements and procedures. This lock can be integrated with most access
control systems to provide the required level of authorisation, remote release and emergency exit.
Specification:
• Face or forend, door or frame mounting
• Programmable choice of resecurement upon door closure
• 40mm x 20mm stainless steel bolt x 32mm throw, with antifriction
roller (siege protection)
• Anti-siege facility built-in
• Lock status monitoring
• 24V D.C. rated motor, 1,400Ncm torque motor, 22W nominal power
consumption
Each lock is supplied with a controller, programmed to provide the lock
functionality. This includes tamper monitoring, bolt and deadlock status,
timing of operations etc.
A selection of enhancements is available (see Additional Features).
There is also a choice of keeps, which need to be ordered separately.
Finish - painted black hammer
AC900 motorised lock
Ordering codes
AC914
Surface fitting
AC924
Forend fitting
Note: If the locks are to be incorporated within a larger building
management system and the controller is not required, please
contact our technical department for any technical support.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 152
Custom Locks
Single-point
12.15
page 153
AC900 - Intelligent Remote Locking
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
K
3
Internal cylinder (Union as standard)
K
4
Internal turnknob release with break dome protection
K
10
External key access; no handle required; unprotected rim latch style cylinder, in case of
power failure (Union as standard)
K11
Key access both sides; no handle required, in case of power failure - (Union as standard)
5
Door position sensor
0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
1
Cylinder - Kaba-20 (registered)
O
2
Cylinder - Assa Twin Combi 5800 (registered)
O
5
Cylinder - Medeco m3-ARX (registered)
M
O
O
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O
10
Cylinder - Kaba quattro pluS (registered)
O
91
Cylinder - Abloy Protec (registered, diamond level)
P
Cylinder guard LPS 1175 security rating 3 protection for door thickness 42 - 60mm
P5
Cylinder guard LPS 1175 security rating 4 protection for door thickness 42- 60mm
P6
Cylinder guard LPS 1175 security rating 3 protection for door thickness 42 - 60mm
W
Steel core fixing
W3
Machine screw fixing
X
One handed means of exit by lever handle meeting BSEN 179: 2008
A selection of keeps are available to suit door opening direction, frame material and detail, these need to be
ordered separately, as follows:
Code
Description
S-9955
Socket keep for surface mounting on inward opening doors hung in a steel frame R/H
S-9955-0001
Socket keep for surface mounting on inward opening doors hung in a steel frame L/H
S-9955-0002
Socket keep for surface mounting on outward opening doors, or when forend fitted
Ordering Example:
AC914-04-K10O5P6X
Motorised AC900 lock, surface mounting, external key provision in case of power failure
(option K10), a registered Medeco m3-ARX cylinder (option O5), protected by a cylinder guard
to LPS 1175 security rating 5 (option P6) and emergency exit provision (option X).
S9955-0002
Keep to suit a surface mounted installation on an outward opening door, hung in a
timber frame.
Handing chart
Note: The handing and orientation code ‘04’ refers to a
‘right hand’, outward opening door.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
‘Purbrook’
Safe-Exit Deadlock
12.15
page 154
PURBROOK
Heavy-Duty, High Security Single-Point Locking Range
For use on doors and gates, the unique modular design of the
Purbrook offers a wide range of operations and combinations
including Solenoid Deadlocking for Access Control, Key Release,
and Emergency Exit Options.
The module is self-handing and bi-directional. Internal operation of
the door can be set to either a Single Action Escape Function or a
Controlled Deadlock Release. This selection is simple, quick and can
be carried out at installation. It obviates the need for a new lock if a
change of operation is required.
Full Stainless Steel construction for corrosion resistance.
Optional extras are available to further enhance your
installation.
The Purbrook provides a 40mm bolt throw which
automatically
secures upon door/gate closure. The specially designed
restraining Trigger Snib is adjustable on-site allowing for greater
tolerances between gate and frame during installation. Combine
any of the following Purbrook Exit and Entry methods to provide the
correct choice of operation to suit your needs.
Entry Via:
0
Not required
1
Key & Lever Handle
2
Access Control & Lever Handle,
with optional Key Override Facility
(in the case of power failure)
4GVTQƒVTGRNCEGOGPVHQT
+PIGTUQNN5%5%
0KIJVNCVEJGU
Exit Via:
0
No exit required
1
Key & Lever Handle
2
Access Control &
Lever Handle
3
Internal Thumbturn
& Lever Handle, with
optional Breakdome protection
over Thumbturn
5
Single Action Escape, via Lever
Handle, Push Pad, Anti-fishing
‘Boomerang’ Handle
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
‘Purbrook’
Safe-Exit Deadlock
12.15
page 155
PURBROOK
Heavy-Duty, High Security Single-Point Locking Range
Optional Enhancements:
Electric monitoring of bolt (M) and Lock Status (N), plus a ‘Request to Exit’ Microswitch (M3)
Internal Handle Protection Shroud for ‘Anti-fishing’ resistance (H22)
Choice of Strike Plates, keeps and fixings – see ‘receivers and fixings’
Full range of Cylinders from most manufactures complete with Cylinder Protection Guards, tested and approved
up to LPCB SR 6 on selected doorsets – P=SR3, P5=SR4, P6=SR5 & SR6
Electric Lock Release Versions: 12V energise to unlock (fail secure) Solenoid, continuously rated, as standard
(other voltages available)
Purbrook Anti-Drill Plate- LPS 1175 Security Rating 6
Ordering Codes:
Entry and exit operational choices are easy to define, with self-creating ordering codes in-line with the latest Surelock
coding system, as follows:
’PB1(nn)’
‘PB’ for a ‘PURBROOK’ deadlock, ‘1’ for Single-Point securing, ‘(0-2)’ for the choice of entry and (0-5)
for the exit codes
EXIT
ENTRY
Code
No Entry
Key Driven
Electric
release
Combination
Lock
0
1
2
3
Code
No Exit
Key Driven
Electric
Release
Turnknob
Release
Emergency
Exit
0
1
2
3
5
Ordering Example:
PB115-00-H3O5P6
‘PURBROOK’ Single-Point deadlock with external Key Entry, a registered Medeco m3-ARX
cylinder (option O5) protected by a High Security Cylinder Guard (option P6) and an internal
Push Pad Emergency Exit Release (option H3)
Purbrook Anti-Drill Plates Ordering Codes:
PBAD-P – Purbrook Anti-Drill for use with Surelock McGill P5 or P6 Cylinder Guards
PBAD-G – Purbrook Anti-Drill for use with Surelock McGill GS/GM Modular Cylinder Guards
Note: The Purbrook Anti-Drill Plate should be used in conjunction with the
Surelock McGill P5, P6, GS4 or GM4 Cylinder Guards.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Single-point
12.15
page 156
EX700 Range of Panic & Emergency Exit Latches
Heavy Duty Single-Point Latch
The Surelock EX700 range of latches provide an effective solution for automatic securing of heavy-duty
industrial doors.
The latch comprises a 15mm square steel latch bolt with a 19mm throw and is housed in a 3mm steel case.
The operation of the handle is smoothly converted into bolt movement by an internal rack and pinion mechanism
that provides for long life and durability. Latch release is provided by a stainless steel lever handle on the inside of
the door.
Enhancements include external key entry using a rim-latch cylinder, or a LEO (Lock with Emergency Override).
The latch has been subjected to over one million cycles of in-house testing.
Supplied with a strike plate for an outward opening door, plus fixings for both
metal and timber doors.
Specification:
• Single handed entry
• All steel construction
• 15mm square steel latch bolt
• Rack and pinion mechanism
• Tested to over one million cycles
• Stainless steel strike plate for an outward opening door
EX701
Popular enhancements include:
• Choice of external key entry facilities
• Choice of cylinders from leading manufacturers, or
customers own supply
• Cylinder protection
• Push pad; or lever handle to BS EN 179: 2008 CE marked
• Panic bar to BS EN 1125: 2008 CE marked
• Stainless steel for hostile environments
• Mortice fitting variants available
• Choice of keeps available
Finish - grey-white RAL 9002 leatherette powder
coating co-ordinated with bright zinc plate.
EX701-S
Ordering code:
EX701 = Lever handle exit to BS EN 179:2008
EX702 = Panic bar exit to BS EN 1125:2008
Panic bar as supplied with the EX702 painted mild steel device
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Single-point
12.15
page 157
Heavy Duty Single-Point Latch
Additional Features (optional):
The following options are available for this package and are specified by appending the option code/s to the
package code.
Code
Description
3
Push pad in place of internal lever handle; BS EN 179:2008 type tested
10
K
External key access; no handle required; unprotected rim latch style cylinder (Union as standard)
L
LEO (external lockable handle), surface mounted
H
L
1
Recessed LEO (flush fitting) - tested to LPS 1175 security rating 3 protection
0
Cylinder - supplied by customer, free-issue (approved types and factory fitted only)
1
Cylinder - Kaba-20 (registered)
2
Cylinder - Assa Twin Combi 5800 (registered)
5
O
Cylinder - Medeco m3-ARX (registered)
O9
Cylinder - Abloy Disklock Pro cylinder (registered, gold level)
O
O
O
10
O
Cylinder - Kaba quattro pluS (registered)
O91
Cylinder - Abloy Protec (registered, diamond level)
P
Cylinder guard LPS 1175 security rating 3 protection for door thickness 42 - 60mm
S
Stainless steel , polished
W
Steel core fixing
W3
Machine screw fixing
Ordering Example:
EX701-04-K10O5
Single-point heavy-duty latch with emergency exit, external key release (option K10) with a
registered Medeco m3-ARX cylinder (option O5), complete with an outward opening stainless
steel keep plate.
Handing chart
Note: The handing and orientation code ‘04’ refers to a
‘right hand’, outward opening door.
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
Custom Locks
Single-point
12.15
Chubb 3R35-Euro
3R35-EuroX,
showing emergency
exit follower
The euro-profile mortise nightlatch case is specifically designed
to accept industry standard europrofile cylinders.
A quick solution to tidy up all
key suiting problems, as you
now have the ability to use own
standard secure key section.
We have also produced the
Euro X version which provides
emergency exit at all times.
• Accepts industry standard
cylinder
• Ability to use own secure
key section
• Version to meet an emergency
exit at all times.
Ordering codes:
3R35-Euro
Non-emergency exit
3R35X-Euro
Emergency exit follower
ASSESSED TO ISO 9OO1:2008
CERTIFICATE NO. 516
Surelock McGill Ltd, 26 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2QY
Tel +44 (0) 118 977 2525 Facsimile +44 (0) 118 977 1913 Email sales@surelock.co.uk Web www.surelockmcgill.com
In accordance with our policy of continued development and improvement we reserve the right to make changes in design and specifications without notice.
page 158