lumenbeam™
Specification Sheet
LARGE
PENDANT - DYNAMIC WHITE
Client
Project name
Order#Type
Qty
FEATURES AND BENEFITS
Physical :
• • • • • • • • • • • • • Low copper content high pressure die-cast aluminum housing
Stainless steel hardware
Silicone sealing devices
Clear tempered glass
Dual chamber design for heat management and ease of maintenance
Electro-statically applied polyester powder coat finish
1ft, 2ft, 3ft or 4ft standard suspension length
EPA = Front = 0.94 sq.ft. Side=0.56 sq.ft.
5.44 kg/ 12 lbs
Standard IP66 rated fixture
Standard IP54 canopy, suitable for wet location (not suitable for water jet)
IK10 rated
Corrosion-resistant coating for hostile environments*
Performance :
• • • • • • • Minimum 15fc (160 lux) @ 91 feet (28m) distance (DWH full output, 6° optic)
Dynamic Warm variable color temperature: 36 LEDs (12x 2200K, 12x 2700K, 12x 3000K)
Dynamic White variable color temperature: 36 LEDs (12x 2700K, 12x 4000K, 12x 6500K)
6°, 10°, 20°, 40° or 60°
Lumen maintenance 120,000 hrs [L70 @ 25°C]
Lumen measurements comply with LM - 79 - 08 standard
Operating temperatures: -25° C to 50° C [-13F to 122F]
Electrical :
• • • • Line voltage luminaire for 100 to 277V
Power and data wires going through stem
50 watts
Dimming options: dim to warm via 0-10V (DWW only), DMX/RDM enabled dim to warm
via single channel (DWW only) or DMX/RDM enabled 3-channel color temperature control
CERTIFICADO No.05884,
05885
RETILAP
IK10
DMX/RDM
3-channel control
6° Optic Delivered Intensity Power
(VN) Output [lm] [peak cd] [W]
CCT*
[K]
DWW
2,333
99,283
50
2,600
DWH
2,862
124,836
50
4,000
43
2,700
43
2,700
Dim to Warm via DMX/RDM
Single channel control (DMX/RDM1)
DWW
5''
[127mm]
6''
[152mm]
1,570
84,391
Dim to Warm via 0-10V
(DIM/DTW)
DWW
1,558
83,746
*Tested at full output.
10''
[254mm]
* Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure!
1/7
© Copyright Lumenpulse 2016
26/AL/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.12
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
LARGE
PENDANT - DYNAMIC WHITE
MOUNTING - CANOPY OPTIONS
5"
[127mm]
5"
[127mm]
135°
MAX.
1', 2', 3' or 4'
1', 2', 3' or 4'
[305mm, 610mm,
914mm or 1219mm]
[305mm, 610mm,
914mm or 1219mm]
SCAN
Standard straight stem canopy
ACAN
Adjustable sloped ceiling canopy
OPTICAL OPTIONS
*Factory installed
LSLH
Linear Spread Lens
Horizontal distribution
(not adjustable on site)
LSLV
Linear Spread Lens
Vertical distribution
(not adjustable on site)
2/7
© Copyright Lumenpulse 2016
26/AL/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.12
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
Factory installed, available for 6° to 40° optics.
See Optical Accessories for field adjustable spread lens.
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
LARGE
PENDANT - DYNAMIC WHITE
ACCESSORIES
Order separately
Optical Accessories:
LBLP-SN-___-BK Snoot accessory. Please specify desired exterior finish from the list below.
Interior surface painted black.
LBLP-SNW-___-BK Snoot Wide accessory. Please specify desired exterior finish from the list below.
Interior surface painted black.
LBLP-VS-___-BK Visor accessory. Please specify desired exterior finish from the list below.
Interior surface painted black.
LBLP-WG-___ Wire Guard accessory. Please specify desired exterior finish from the list below.
LBLP-LSLA-___ Linear Spread Lens Adjustable accessory. Please specify desired exterior finish
from the list below.
Available finishes:
BK - Black Sandtex
BRZ - Bronze Sandtex
SI - Silver Sandtex
WH - Smooth white, low gloss
BKTX - Textured black
BRZTX - Textured bronze, non-metallic
GRATX - Textured medium gray
GRNTX - Textured green
WHTX - Textured white
CC - Custom color and finish (please specify RAL color)1
Accessory combinations:
+
Snoot Snoot Wide Visor Wire Guard
Snoot
NO
NO
NO
YES
Visor
NO
NO
NO
YES
Linear Spread
Lens Adjustable
YES
YES
YES
NO
Accessory combinations must be ordered together on a single line.
Ex: A Snoot + Wire Guard combination order code is LBL-SNWG-BK-BK.
Notes:
1
North American RAL colors specified with RAL number only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate color
charts. Final color matching results may vary.
3/7
© Copyright Lumenpulse 2016
26/AL/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.12
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
LARGE
PENDANT - DYNAMIC WHITE
ACCESSORIES - continued
Order separately
Control Systems:
LTO2 Lumentouch is a wall mount DMX 512 controller keypad.
LCU Lumencue is a USB / mini SD DMX 512 controller.
LID LumenID is a diagnostic and addressing DMX 512 controller.
It must be specifi ed on all DMX applications.
Refer to LID specifi cation sheet for details.
LTN Lumentone is a simple pre-programmed DMX 512 controller
with a push button rotary dial and live feedback.
Control Boxes:
CBX DMX/RDM control box.
Up to six power and data outputs to fi xtures or fi xture runs.
Ethernet enabled option.
Refer to CBX specifi cation sheet for details.
4/7
© Copyright Lumenpulse 2016
26/AL/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.12
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
LARGE
PENDANT - DYNAMIC WHITE
TYPICAL WIRING DIAGRAMS
Dimming Version (DIM/DTW* - Dim to Warm via 0-10V)
*Available for DWW version only, 2700K to 2200K
0-10V
Dimmer
American
Color Code
CE
Color Code
USE
Green
Black
White
Red/Purple
Orange
Yellow/Green
Brown
Blue
Black
Grey
Ground
Live 100-277V
Neutral
0-10V / Data +
0-10V / Data -
#16-5 Power & data cable
(by others)
100-277V
From
dimmer
Data+ red
Data- orange
To
fixture
100-277V
Maximum run lengths - 15A maximum, 16AWG cable,
10' [3m] on center spacing
Line black
Configuration/Voltage
Ground green
Neutral white
To next
fixture
Wire-nuts
5/7
© Copyright Lumenpulse 2016
2
26/AL/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.12
3
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
208V
240V
277V
22
32
36
39
50ft from electrical panel
18
28
32
35
Notes:
1
Junction box
(by others)
120V
10ft from electrical panel
Run length calculations are based on a voltage drop of no more than 25V.
Consult factory for specific applications and max. cable length recommendations.
0-10V mA Ratings:
Passive Dimmer (Current Sink): 3mA per fixture
Active Dimmer (Current Source): 0.5mA per fixture
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
LARGE
PENDANT - DYNAMIC WHITE
TYPICAL WIRING DIAGRAMS - continued
Star Layout (DMX/RDM1*, DMX/RDM)
*Available for DWW version only, 2700K to 2200K
100-277V
CBX-ST
Data out to next CBX
(optional, not isolated/
not boosted)
#16-5
Power &
data cable
(by others)
American
Color Code
CE
Color Code
USE
Green
Black
White
Red/Purple
Orange
Yellow/Green
Brown
Blue
Black
Grey
Ground
Live 100-277V
Neutral
0-10V / Data +
0-10V / Data -
Data Lumentouch 2.0
input
100-240V
Maximum run lengths - 15A maximum, 16AWG cable,
10' [3m] on center spacing
Configuration/Voltage
120V
208V
240V
277V
10ft from CBX
22
32
32
32
50ft from CBX
18
28
32
32
Notes:
Run length calculations are based on a voltage drop of no more than 25V and
a 32 DMX/RDM enabled fixture limit per DMX/RDM run.
Consult factory for specific applications and max. cable length recommendations
3
Each fixture requires 1 DMX address for DMX/RDM1.
Each fixture requires 3 DMX addresses for DMX/RDM.
4
6 outputs max. per CBX-ST, 1 output max. per CBX-DS.
1
2
lumenterminator
(use at the end
of each run only)
DMX terminator is required at the end of each run to maintain
data integrity.
(2x) DMX lumenterminator included per CBX-DS
(6x) DMX lumenterminator included per CBX-ST
See installation instructions for details.
Data- orange
Data+ red
From
fixture or
CBX
To
Fixture
Line black
Ground green
Neutral white
Daisy Chain Layout (DMX/RDM1*, DMX/RDM)
Wire-nuts
*Available for DWW version only, 2700K to 2200K
Junction box
(by others)
CBX-DS
Data out to next CBX
(optional, not isolated/
not boosted)
100-277V
#16-5 Power
& data cable
(by others)
Data Lumentouch 2.0
input
100-240V
6/7
© Copyright Lumenpulse 2016
26/AL/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.12
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenbeam™
Specification Sheet
LARGE
PENDANT - DYNAMIC WHITE
HOW TO ORDER
Select: Select: Select: Select: Select: Select: Select: Select: Select:
LBLP
1
2
3
4
Housing:
1
5
6
6
7
220 - 220 volts
240 - 240 volts
277 - 277 volts
Colors and Color temperatures:
3
DWW - Dynamic warm white color temperature
ranging from 2200K to 3000K.
DWH - Dynamic white color temperature
ranging from 2700K to 6500K.
7
Optical Option:
LSLH - Linear Spread Lens Horizontal distribution1
LSLV - Linear Spread Lens Vertical distribution1
8
Finish:
BK - Black Sandtex
BRZ - Bronze Sandtex
SI - Silver Sandtex
WH - Smooth white, low gloss
BKTX - Textured black
BRZTX - Textured bronze, non-metallic
GRATX - Textured medium gray
GRNTX - Textured green
WHTX - Textured white
CC - Custom color and finish (please specify RAL color)2
Optic:
4
VN - Very Narrow 6°
NS - Narrow Spot 10°
NF - Narrow Flood 20°
FL - Flood 40°
9
Control:
WFL - Wide Flood 60°
DIM/DTW - Dim to Warm via 0-10V, 2700K to 2200K3, 4
DMX/RDM1 - Dim to Warm via single-channel DMX/RDM,
2700K to 2200K3, 5
DMX/RDM - 3-channel color temperature control via
DMX/RDM6
Mounting Type:
5
SCAN - Straight stem canopy
ACAN - Adjustable sloped ceiling canopy
10
Please specify stem length:
12 - 12 inches
24 - 24 inches
36 - 36 inches
48 - 48 inches
Consult factory for custom lengths
Voltage:
100 - 100 volts
120 - 120 volts
208 - 208 volts
9
Mounting Length:
LBLP - Lumenbeam™ Large Pendant
2
8
10
Option:
CRC - Corrosion-resistant coating for hostile environments
CE - CE (certification covers European Economic Area)
Notes:
1
Factory installed, available for 6° to 40° optics. See Optical Accessories for field adjustable spread lens. 2 North American RAL colors specified with RAL number only are provided with a
smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary. 3 For more information about Lumenpulse’s
Dim to Warm technology consult the application note and the brochure on the Lumenpulse website. 4 Available for DWW version only. 10% minimum dimming value. 5 Available for DWW
version only. 1% minimum dimming value. 1 DMX address per fixture. 6 3 DMX addresses per fixture.
7/7
© Copyright Lumenpulse 2016
26/AL/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.12
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.