WS-1K
Corner-Mounted Individual Wall Shower
• Completely Preassembled Wall Shower Unit
• Ready for Connection to Plumbing Supplies
Specifications
Materials
Shower panel is type 304 stainless steel. All other exposed parts are stainless steel or
chrome-plated brass. Valve bodies are brass casting. Supply piping is copper tubing.
Standard Equipment
Flow Control
A 1.5 GPM (5.7 LPM) flow control is standard. Actual flow may vary, but will not exceed
2.0 GPM (7.6 LPM) max.
Shower Panel
Shower panel and top and bottom covers constructed of 18 gauge stainless steel. Stainless
steel soap tray mounted to panel. Mounting frame is 16 gauge.
Showerhead
Standard fixed direction adjustable spray showerhead.
Supply Inlets
Supply inlets are 1/2" type “L” copper tubing. Inlets are accessible through the back of the
shower or through knockouts in the top and bottom covers.
WS-1K
Standard Selections (Must select one from each category)
Showerhead Height (select one)
¨ 6'-0" Standard Height
Valve Type (select one)
Hot/Tempered and Cold Supplies
Equa-Flo Pressure Balancing Valve
EF
HD
Equa-Flo HD Pressure Balancing Valve
TMV Thermostatic Mixing Valve
HC
Hot and Cold Compression Valve*
Single Tempered/Cold Supply
Infrared Metering Valve* **
AZ
PM
Presto 50B Mechanical Metering Valve
AST
Air Metering Valve
SV
Single Compression Valve
TT
TouchTime® Metering Valve**
Optional Selections
Showerhead Variations
SX
Severe Service Showerhead
SF
Deluxe Showerhead with Ball Joint
ES
Economy Soft Flow with Ball Joint
Optional Flow Control (Not available with SF Showerhead)
G
1.5 GPM Flow Control
Volume Control (Not available with SX or ES Showerhead)
¨AKV
¨THV
Allen Key Volume Control
T-Handle Volume Control
Ball Joint (Not available with SX or ES Showerhead)
LBJ
Lockable Ball Joint
*Non-cancelable, non-returnable
**AZ and TT valves require optional 24V Class 2 transformers, available as a separate
item from Bradley. PT (S83-134) 24V Plug In Transformer (1/2 amp) Up to 2 showers.
4RT (S45-2045) 24V Remote Transformer (2amp) Up to 4 showers.
Page 1 of 2
7/5/2016
This information is subject to change without notice.
Bradley_IndividualShowers_WS-1K
Miscellaneous
SHV
Vertical Shroud:
Showerhead Height _____________
Floor to Ceiling Height ___________
RSD
Recessed Soap Dish
ST
Stops in Supply for Valves (included with EF, HD and TMV valves)
VS
Vandal Resistant Screws
© 2016 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
WS-1K
Corner-Mounted Individual Wall Shower
Dimensions
(mm)
6-9/16"
(167)
10-5/8"
(270)
Support
Bracket
4-7/8"
(124)
2"
(51)
Centerline
Mounting
Holes and
Supplies
2-1/2"
(64)
23"
(584)
Standard
Height to Floor
6'-0"
Juvenile
Height to Floor
5'-6"
15"
(381)
Mounting
Screw Location
Rough-Ins
2"
(51)
6-9/16"
(167)
4-7/8"
(124)
Hot
Page 2 of 2
7/5/2016
This information is subject to change without notice.
Bradley_IndividualShowers_WS-1K
4-7/8"
(124)
6-9/16"
(167)
Cold or
Tempered
© 2016 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com