LED-WD VI-TX
LED-WD VI-TX-WH
LED-WD VI
User Guide
Advanced LED Technology
11 -
Note: 1)Press the button on LED-WD VI-TX, you will see wireless control effect of the led
luminaries.
2)Max. 10 LED-WD VI-TX can be set pair with one LED-WD VI RX.
Update Software
Download update file from our website; follow the user manual of VD-01 to update the fixture via
VD-01(not included)，also you can follow the steps as below:
A、 Before opening the upgrading window, please turn off the power of the LED-WD VI-TX first, then
open the upgrading window
B、Then click Fixture Firmware Upgrade on the upgrade window, you will see a new upgrade window
C、Power up the LED-WD VI -TX at your hand Then click open order to open the upgrade file
At this step, please check the Green LED indicator on VD-01, the LED indicator should be blinking at
this moment, if it is not blinking then the upgrade will be failed. PLEASE NOTE THIS.
D、single click Upgrade order, you will see the speed engine is running,
At this step, please check the Green Signal LED indicator on smart wall dimmer and Green LED
indicator on VD-01, when upgrading is going, both LED indicators are blinking, if each of them is not
blinking then the upgrade will be failed. PLEASE NOTE THIS.
E、After finishing the upgrade process, you will see the firmware upgrade finish window
F. Exit the upgrade window, please reboot your LED-WD VI-TX to check out whether they are
upgraded successfully.
1-
10 -
Mode 1 RGB&WHITE : (Dip #1=off, Dip #2=off)
In this mode you can see Red,Green,Blue,White color on Tri-color led indicators.
Mode 2 RGBD&NO WHITE : (Dip #1=on, Dip #2=off)
In this mode you can see Red,Green,Blue without White color on Tri-color led indicators.
Mode 3 RGBD&WHITE: (Dip #1=off, Dip #2=on)
In this mode you can see Red,Green,Blue,White color on Tri-color led indicators.
Mode 4 RGB&NO WHITE : (Dip #1=on, Dip #2=on)
In this mode you can see Red,Green,Blue without White color on Tri-color led indicators.
LED WD VI is a modern and distinctive wall mounted controller, with posh glass touch screen, excellent
built-in program like color (0-99), 3 fade (3 color, 5 color, 7 color), 3 chase (3 color, 5 color, 7 color) for your
convenient selection. In addition, 12 scenes programmable, under its aristocratic panel, you can also remote
control your LED fixtures that assigned with related wireless receiver（LED-WD
VI-RX）
Features
z
z
z
z
z
z
z
z
Control one group of RGB/RGBD LED luminaries
Touch screen
Built-in 100 color, 3 fade, 3 chase ( fade/chase: 3 color, 5 color, 7 color)
Dimmer & Speed adjustable : adjust brightness for all luminaries (value: 0-99) & speed of fade/chase
(value: 0-99)
12 scenes can be programmed
4 RGB(Tri-color) LED indicators showing the effect of LED luminaries synchronously
ON/OFF: power LED indicator turns Red is OFF, Blue is ON
Lock protection to avoid unintentional interference
z
Wireless transmitter: work with wireless receiver（LED-WD
VI-RX）as well as dimmer
Wireless operation:
Technical specifications
z
Input voltage: AC 100-240V 50/60Hz
z
z
z
Dimension: 87 x 87 x 38 mm
Weight: 0.3 kg
White panel optional
Operation panel
Set up LED-WD VI RX/TX
1. Power off the LED-WD VI-TX, Press code button 1 on LED-WD VI RX, the LED indicator 3 on
the RF-DMX-TX will blink slowly.
2.
Power on the LED-WD VI-TX, the LED indicator 3 blinking fast, which means LED-WD VI-TX
sets up with LED-WD VI- RX successfully.
3.
Press set up code button 1 for about 5 seconds, the related LED indicator will blink slowly,
press the button 1 again to cancel wireless control settings.
9-
① ON/OFF button: Power On/Off the smart wall dimmer
② function buttons: UP and down, left and right to scroll through the menu or value
2-
③
④
⑤
⑥
⑦
Led indicator: to indicate which function page you are in when in Fade/Chase/bank browsing
LED display: show the function menu
Button S : Select function or confirm the operation
No button : used for programming and play stored scene
Data terminal: Output DMX signal
Connection & Installation
Please wire and mount the controller as the diagram below:
8 Power input terminal: AC 100-240V/ 50~60Hz
○
Wiring diagram
Mounting diagram
Wireless function
z How to set the mode of Wall Dimmer VI Receiver (LED-WD VI-RX)
Mode Selection: (Dip #1=on)
Dip Switch: To choose the mode you desired. Please refer to the following diagram to know how
to set the DIP Switch:
3-
8-
2)The Led indicator we use is RGB Tri-color led, it’s more real and convenient in color mixing and
check out the scene you’ve stored.
Main function
Lock
Power on the Smart Wall dimmer, use
(left) or
(lock) menu show on the display, then use
(right) to scroll through the menu, till
(up) or
(down) to input the right code
from
….
(0-99). Once selected, press
to confirm and the smart wall dimmer
will be unlocked .without any operation after 30 seconds to enter OFF status automatically.
Note: the code for unlocking the controller is 4444, please kindly note this.
Factory reset
Press
button, LED-WD VI-TX enters OFF status, the related LED indicator turns red, then hold
and No. buttons 1 and 4 for 2 seconds, the LED-WD VI-TX will power on again, the related
LED indicator will turn blue, and LED-WD VI-TX will enter normal operation status automatically, then
factory reset succeeded .
7-
4-
ON/OFF
Press this button to power On/Off the smart wall dimmer, when the Led indicator turns blue, the
power is on, when it’s red, the power is off.
Chase
Power on the Smart Wall dimmer, use
(left) or
(right) to scroll through the menu, till
(chase) menu show on the display, then use
(up) or
(down) to select
Color
(chase 1)
Power on the Smart Wall dimmer, use
(left) or
(color) menu show on the display, then use
….
(0-99). Once selected, press
seconds to enter OFF status automatically
(chase 2)
(chase 3) and the related Led indicator above the LED
(right) to scroll through the menu, till
(up) or
(down) to select color
display will light up . Once selected, press
to enter OFF status automatically.
to confirm, without any operation after 30 seconds
to confirm, without any operation after 30
Speed
Dimmer
Power on the Smart Wall dimmer, use
Power on the Smart Wall dimmer, use
(left) or
(dimmer) menu show on the display, then use
(right) to scroll through the menu, till
(up) or
of brightness
….
(0-99). Once selected, press
operation after 30 seconds to enter OFF status automatically.
(down) to select the value
(speed) menu show on the display, then use
….
(0-99). Once selected, press
seconds to enter OFF status automatically.
(left) or
(fade) menu show on the display, then use
Once selected, press
automatically.
(up) or
(down) to select speed
to confirm, without any operation after 30
Program
Power on the Smart Wall dimmer, use
(fade 2)
(right) to scroll through the menu, till
to confirm, without any
Fade
1)
(left) or
(right) to scroll through the menu, till
(up) or
(down) to select
(fade
(fade 3) and the related Led indicator above the LED display will light up .
to confirm, without any operation after 30 seconds to enter OFF status
Power on the Smart Wall dimmer, use
(left) or
(right) to scroll through the menu, entering
color/fade/chase, to select your desired scene, then hold
(program) menu, then press.
(up) or
use
,
,
,
and the display will show
synchronously to select and store the scene, or you can
(down) to select
(bank 1, which contains
,
,
,
)
(bank 2, which contains , ,
,
)
(bank 3, which contains , ,
, ) to
change the bank page, total: 3 Banks x 4 =12 scenes can be programmed and stored. You can press
,
,
,
to play the scene stored.
Note: 1)The Led indicators under
,
,
,
don’t have to check you Led luminaries all the time.
5-
6-
will show the effect synchronously so that you