Panic and
emergency exit
hardware
560-570 Series & 376 Series
Briton panic and emergency exit hardware
Designed to provide immediate
escape, first time, every time
When lives may depend on an exit device we feel we have a responsibility to design and
test our products to exceed all current performance and safety standards, ensuring they
will operate first time, every time.
The Briton 560-570 Series has been designed to offer modular solutions to panic exit
applications which require multi-point latching with a superior and refined aesthetic,
designed and manufactured in Italy.
The Briton 376 Series is designed to provide immediate escape and still incorporates all
the features and benefits expected from an exit device that is branded Briton.
The Briton ranges, comprising the following variants, are fully compliant with EN 1125
or EN 179, are CE marked to the latest standards and come complete with a 5 year
guarantee:
ƒƒ
Vertical panic bolts
ƒƒ
Reversible rim panic latches
ƒƒ
Mortice panic nightlatches
ƒƒ
Push pad vertical bolts
ƒƒ
Reversible push pad rim panic latches
ƒƒ
Push pad mortice nightlatches
2
www.allegion.co.uk
3
Briton exit hardware - Standards and legislation
Panic or emergency?
From 1st January 2010 it became mandatory for all exit devices to comply with the latest revisions of EN 1125 or EN 179 and CE marking.
All Briton 560 - 570 and 376 Series exit devices have been tested and certified to prove compliance with the
latest standards EN 1125 & EN 179 which govern the application of panic and emergency exit hardware, but
which standard applies to which application?
PANIC APPLICATION EN 1125:2008
Panic Applications - Conforming to EN 1125
A 'panic' application is where the exit door is used by
members of the public and must provide “safe and
effective escape through the doorway with minimum
effort and without prior knowledge of operation”.
Typical applications include:
ƒƒ Shops
ƒƒ Schools
ƒƒ Hospitals
ƒƒ Theatres and Cinemas
According to EN1125 the length of the panic exit
device should be as near as possible the effective
width of the opening and not less than 60% of the
width of the opening.
4
www.allegion.co.uk
Briton exit hardware - Standards and legislation
Following the update to the standards in 2008, testing became more onerous to better reflect 'real life'
scenarios and now require the exit devices to function effectively under the action of a side load, which
simulates the addition of smoke/door seals.
EMERGENCY
APPLICATION EN 179:2008
Emergency Applications - Conforming to EN 179
An 'emergency' application is where the exit door is in
a low occupancy environment and will only be used
by trained personnel, such as in a place of work never
accessed by the public or people unfamiliar with the
escape drill.
Typical applications include:
ƒƒ Offices
ƒƒ Private Flats & Apartments
ƒƒ Store Rooms & Boiler Rooms
Products used in emergency applications require only
a single point of operation e.g. pushpads or levers.
For Declaration of Performance please go to:
www.britondops.co.uk
For full details of certification please go to:
www.allegion.co.uk/downloads and click on Test
Certificates.
5
Briton panic & emergency exit hardware
Briton 571 touch bar panic exit device
coupled with Briton 574.S side acting
pulman latches providing 3 point latching.
6
www.allegion.co.uk
Briton panic & emergency exit hardware
With options to suit every
application and budget
Medium to high end specifications
The Briton 570 Series touch bar devices offer a
modular solution to panic exit applications. By combining additional latching points, the Briton 570 offers up to
5 point latching on single or double doors. Ideally suited to medium to high end commercial specifications where
the elegant low profile look of the touch bar is an important consideration.
Medium to high end specifications
The Briton 560 Series offers the same performance
and the security of multi-point locking as the Briton 570 but with push bar operation. The Briton 560 is also
available as a push pad for emergency exit applications.
Medium to low end specifications
This is the latest refinement of the long established
Briton 376 Series panic and emergency exit hardware. This value engineered range offers the ideal combination
of performance, in a simple, attractive and affordable package. With push bar or push pad operation it provides
single point latching or vertical bolt security for panic or emergency exit applications.
7
Briton 560-570 Series - The modular system
Choose an operating device, 560 push bar or 570 touch bar
and select additional latching devices if they are required.
Briton 560 and Briton 570 panic exit devices have been designed to offer modular solutions for mid to high end
specification, providing a combination of style, safety and optimum security. Comprising of one-point locking
push bar or touch bar device and optional modular locking elements, these units offer increased flexibility and
adaptability to suit individual requirements.
2A
6
2B
2
1
-50%
1A
5
4
1C
1
1A
6
1B
4
3A
5
For example, the diagram above illustrates:-
3
3B
1
A mounting plate installed on the door will accept either ...
1A
Push bar panic exit device ... or ...
1B Touch bar panic exit device.
1C Snap-on cover(s) conceals the mechanism and fixings.
8
www.allegion.co.uk
2
Optional upper pullman kit with mounting plate [2A], snap-on cover [2B], patented Fast-Fix cable [4], cable cover section [5] and strike [6].
3
Optional lower pullman kit with components as for the upper pullman.
Briton 560-570 Series - The modular system
Pullman latches
Pullman latches provide a smooth and quiet closing
action, ideal for interconnecting doors in highly populated
areas.
Available as top/bottom latches or side acting latches for
applications where installation of the striker to the floor or
threshold is not practical.
In all cases the pullman latch is connected to the push bar
or touch bar activation device using a unique adjustable
stainless steel cable which is fully concealed beneath
extruded cover channels.
Top pullman
Push bar or touch bar
At the heart of the system is the activation device which
is available in a 'push bar' design or the lower projection
'touch bar'. Each device can be used on its own to provide
single point latching or with the addition of universal
pullman latches for multi-point latching.
Upper side pullman
Additional side pullman latches (right)
can be added to the system. These can
be used at any position above or below
the activation device to produce 4 or
even 5 point latching on a single door.
Lower side pullman
Security
Designed to provide immediate escape at any
time these devices also provide a high level of
security from intruders from the outside. The antithrust device in the latch and pullmans prevents
unauthorised retraction of the latches and the
modular design allows various levels of multi-point
locking.
Bottom pullman
9
Briton 560-570 Series - Features and benefits
Installed in approximately
seven minutes, half the time of
the previous system.
The Briton 560 and 570 panic exit devices offer:
ƒƒ Robust construction with improved durability suitable for all heavy traffic applications
ƒƒ Technologically advanced design with proven performance and reliability
ƒƒ Grip function on 570 touch bar design allows the door to be pulled closed
ƒƒ Shaped end piece to allow easier access to door lock
ƒƒ Suitable for doors with a minimum clear opening width down to 500mm. This can be reduced to 350mm
where side latches are not required
ƒƒ Unique assembly which reduces installation time by as much as 50% (see opposite)
10
www.allegion.co.uk
Briton 560-570 Series - Features and benefits
Installation benefits
The Briton 500 Series has a number of unique
features to make installation much easier and
quicker:
ƒƒ Easy-to-use Accufit templates and backplates
for the individual panic devices and the pullman
latches
ƒƒ Patented Fast-Fix cable system replaces the
conventional vertical rods to connect the
operating unit and the pullman latches
ƒƒ Fine adjustments of the cable system are
possible in-situ for maximum accuracy during installation
ƒƒ Minimal measuring is required to prepare the
units to suit the door height
ƒƒ Quick and simple snap on covers for the
operating mechanisms and pullman latches
ƒƒ Easy to follow pictorial installation instructions
See for yourself how easy it is to install.
Scan the link or go to:
http://tinyurl.com/83yech9
11
Briton 570 Series - Panic exit hardware
The combinations below are the most common applications of the touch bar device
and the modular pullman latch kits. When ordering you must order the operating
device and the pullman kit(s) required. For further guidance refer to page 16.
EN 1125 Classification - 377B1422BA
The 571 device is available in 2 lengths (specify 571.1 for 1200mm wide and 571.2 for 840mm wide). According to EN1125 the
length of the touch bar unit should be as near as possible the effective width of the opening and not less than 60% of the width
of the opening.
One Point Latching
Two/Three Point Locking with Upper and Lower Pullmans
Pullmans
Three Point Locking with Two Side ƒƒSuitable for use on single doors and ƒƒSuitable for use on single doors, ƒƒSuitable for use on single doors and the first opening leaf of rebated the first opening leaf of rebated double doors.
doors.
double doors.
ƒƒUpgradeable to multi-point latching.
ƒƒUpgradeable to four point locking ƒƒUpgradeable to four point locking on
ƒƒNon-handed – suitable for both left ƒƒNon-handed – suitable for both and right handed doors.
rebated and non-rebated double on single doors.
rebated double doors.
ƒƒDogging device (hold-open) option ƒƒDogging device (hold-open) ƒƒAlarm micro-switch option available
ƒƒDogging device (hold-open) option ƒƒAlarm micro-switch option available.
available (see page 19 for details).
(see page 19 for details).
left and right handed doors.
single doors and first opening leaf of
option available.
ƒƒNon-handed – suitable for both left and right handed doors.
available.
ƒƒAlternative bottom striker option ƒƒAlarm micro-switch option available.
available.
Components required
Components required
Components required
Briton 571.1 (1200mm length)
Briton 571.1 (1200mm length)
Briton 571.1 (1200mm length)
Briton 571.2 (840mm length)*
Briton 571.2 (840mm length)*
Briton 571.2 (840mm length)*
Briton 574.V
Briton 574.S
12
www.allegion.co.uk
Briton 570 Series - Panic exit hardware
* The 571 and 573.N devices are
available in 2 lengths (specify 571.1 for
1200mm wide and 571.2 for 840mm
wide). The touch bar and chassis can
be cut down on-site for accurate sizing.
Three Point Locking with One Upper and One Side Pullman
Nightlatch
latches can be added to any of the
ƒƒSuitable for use on single doors
ƒƒSuitable for single doors, rebated systems to provide an additional
ƒƒUpgradeable to four point locking latching point.
ƒƒHanded – supplied for right handed on single doors.
Panic Device with Mortice and non-rebated double doors.
ƒƒHanded – 574.VS.L suitable for left
handed doors & 574.VS.R suitable ƒƒSupplied with cylinder mortice for right handed doors.
nightlatch with anti-thrust feature ƒƒDogging device (hold-open) option to prevent manipulation of the available.
latch when the door is closed.
ƒƒAlarm micro-switch option available.
ƒƒNightlatch accepts euro and oval Briton 574.AS additional side pullman
doors - can be reversed on site.
profile cylinders (not supplied).
ƒƒComplete with steel box striker.
ƒƒAlarm micro-switch option available
Components required
Components required
Briton 571.1 (1200mm length)
Briton 573.N.1 (1200mm length)
Briton 571.2 (840mm length)*
Briton 573.N.2 (840mm length)*
Briton 574.VS.L or Briton 574.VS.R
13
Briton 560 Series - Panic exit hardware
The combinations below are the most common applications of the push bar device
and the modular pullman latch kits. When ordering you must order the operating
device and the pullman kit(s) required. For further guidance refer to page 17.
One Point Latching
EN1125 Classification - 377B1422AA
Two/Three Point Locking with Two/Three Point Locking with Two Upper and Lower Pullmans
Side Pullmans
ƒƒSuitable for use on single doors and ƒƒSuitable for use on single doors, ƒƒSuitable for use on single doors and the first opening leaf of rebated the first opening leaf of rebated double doors.
doors.
double doors.
ƒƒUpgradeable to four point locking ƒƒUpgradeable to four point locking on
ƒƒUpgradeable to multi-point latching.
ƒƒNon-handed – suitable for both left and right handed doors.
ƒƒDogging device (hold-open) option available (see page 19 for details).
ƒƒAlarm micro-switch option available
(see page 19 for details).
rebated and non-rebated double on single doors.
single doors and first opening leaf of
rebated double doors.
ƒƒNon-handed – suitable for both left and right handed doors.
ƒƒNon-handed – suitable for both left ƒƒDogging device (hold-open) ƒƒDogging device (hold-open) option option available.
and right handed doors.
ƒƒAlarm micro-switch option available.
available.
ƒƒAlternative bottom striker option ƒƒAlarm micro-switch option available
available.
Components required
Components required
Components required
Briton 561
Briton 561
Briton 561
Briton 574.V
Briton 574.S
14
www.allegion.co.uk
Briton 560 Series - Panic exit hardware
Briton 574.AS additional side pullman
latches can be added to any of the
systems to provide an additional
latching point.
EN1179 Classification - 377B1452BA
Three Point Locking with One Upper Briton 581 Push Pad
and One Side Pullman
ƒƒComplies with EN 179 suitable for ƒƒSuitable for use on single doors.
ƒƒUpgradeable to four point locking ƒƒSuitable for use on single doors or in on single doors.
emergency exit applications only.
combination on double doors.
ƒƒHanded – 574.VS.L suitable for left
ƒƒSingle point latching.
handed doors & 574.VS.R suitable ƒƒSuitable for use with additional for right handed doors.
pullman latch kits. See page 18 for ƒƒDogging device (hold-open) option more information on components available.
and locking options.
ƒƒAlarm micro-switch option available
Components required
Briton 561
Briton 574.VS.L or Briton 574.VS.R
15
Briton 560-570 Series - Applications
Briton 560-570 Series exit hardware is suitable for application to single doors, and in various combinations on
non-rebated and rebated double doors.
Single door applications - Briton 570 Series
One point
latching
Two point
latching
Three point
latching
Three point
latching
Three point
latching
Part No.
Part No.
Part No.
Part No.
Part No.
Briton 571.1*
Briton 571*
Briton 571*
Briton 571*
Briton 571*
or Briton 571.2
Briton 574.V
Briton 574.V
Briton 574.S
Briton 574.VS.L
Double door applications - Briton 570 Series
Three point latching
- rebated doors
1st opening leaf
Five point latching
- rebated doors
Four point latching
- non rebated doors
1st opening leaf
Part No.
Part No.
Part No.
Part No.
Part No.
Part No.
Briton 571.1*
Briton 571*
Briton 571*
Briton 571*
Briton 571*
Briton 571*
Briton 574.V
Briton 574.S
Briton 574.V
Briton 574.V
Briton 574.V
* The 571 device is available in 2 lengths (specify 571.1 for 1200mm wide and 571.2 for 840mm wide). The touch bar and chassis
can be cut down on-site for accurate sizing.
★ Side latch not required - disable during installation
16
www.allegion.co.uk
Briton 560-570 Series - Applications
Clockwise closing
Anti-clockwise closing
Left hand
Right hand
ISO. 5.0
ISO. 6.0
Single door applications - Briton 560 Series
One point
latching
Two point
latching
Three point
latching
Three point
latching
Three point
latching
Part No.
Part No.
Part No.
Part No.
Part No.
Briton 561
Briton 561
Briton 561
Briton 561
Briton 561
Briton 574.V
Briton 574.V
Briton 574.S
Briton 574.VS.L
Double door applications - Briton 560 Series
Three point latching
- rebated doors
1st opening leaf
Five point latching
- rebated doors
Four point latching
- non rebated doors
1st opening leaf
Part No.
Part No.
Part No.
Part No.
Part No.
Part No.
Briton 561
Briton 561
Briton 561
Briton 561
Briton 561
Briton 561
Briton 574.V
Briton 574.S
Briton 574.V
Briton 574.V
Briton 574.V
★ Side latch not required - disable during installation
17
Briton 560-570 Series - Applications
Briton 560-570 Series exit hardware is suitable for application to single doors, and in various combinations on
non-rebated and rebated double doors.
Single door applications - Briton 581
One point
latching
Two point
latching
Three point
latching
Three point
latching
Three point
latching
Part No.
Part No.
Part No.
Part No.
Part No.
Briton 581
Briton 581
Briton 581
Briton 581
Briton 581
Briton 574.V
Briton 574.V
Briton 574.S
Briton 574.VS.L
Double door applications - Briton 581
Three point latching
- rebated doors
1st opening leaf
18
Five point latching
- rebated doors
Four point latching
- non rebated doors
1st opening leaf
Part No.
Part No.
Part No.
Part No.
Part No.
Part No.
Briton 581
Briton 581
Briton 581
Briton 581
Briton 581
Briton 581
Briton 574.V
Briton 574.S
Briton 574.V
Briton 574.V
Briton 574.V
www.allegion.co.uk
Briton 560-570 Series - Accessories
Alarm switch kits
566.AK
576.AK
These units allow standard models to
Alarm switch kit for use with Alarm switch kit for use with be connected to electronic audio/visual
Briton 560 only
Briton 570 only
566.DK
576.DK
These units allow standard models
Dogging device kit for use with Dogging device kit for use with Briton
to be upgraded to permit free access
Briton 560 only
570 only (not suitable for Briton 573)
Briton 576.RE
Briton 574.STE
Briton 574.STP
Top rod extension kit
Easy clean socket for use with lower
Strike for PVCu doors
Rod extension kits are suitable for use
pullman on either Briton 560 or Adjustable strike for use with top or
with both Briton 560 and 570 devices
Briton 570.
side pullmans fitted to PVCu frames
on doors in areas that require the
Finish: matt black
with a projection of 14 - 24mm.
alarm or door control systems giving
immediate notification of use when the
panic device is operated.
The door cannot be opened without
the system being activated.
The switch is mounted in the end box
of the panic operator.
Dogging device (hold-open) kits
when required.
The manual hold-open function is
operated by a key and holds all latches
in the withdrawn position.
push bar or touch bar to be in a lower
Finish: matt black
position e.g schools. These can also
be used on doors up to 3350mm high,
however doors over 2500mm high are
outside the scope of EN 1125.
Finish: silver or matt black
19
n
n
n
n
574.AS
n
574.VS.R
n
574.VS.L
n
574.S
573.N.2
n
574.V
573.N.1
n
581
571.2
Panic exit device
571.1
Device Type
561
Briton 560-570 Series - Product selector
n
Emergency exit device
Touch bar operator
n
Push bar operator
n
Push pad operator
n
Single point latch
n
n
n
Pullman latches top/bottom
n/a
n/a
Pullman latches side acting
n/a
n/a
Pullman latches - top and side acting
bottom combination
n/a
n/a
n
n
Mortice nightlatch
n
n
n
n
n
n
Features
n
Adjustable shoots
Touch bar/push bar cut on-site
n
n
n
n
n
Fast-Fix cable system
Vertical cable cover cut on-site
n
n
n
n
n
n
Alarmed
o
o
o
o
o
o
Dogged hold-open facility
o
o
o
o
o
o
n
n
Self handed
n
n
n
n
n
n
n
n
n
n
n
n
Handed - specify when ordering
C/W mortice cyl. nightlatch
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Powder coated silver
n
n
n
n
n
n
n
n
n
n
n
Plated finishes
n
n
n
n
n
n
n
n
n
n
n
5 year guarantee
Finishes
n Standard feature
20
o
www.allegion.co.uk
Optional feature using accessories
571.1
571.2
573.N.1
573.N.2
574.V
574.S
574.VS.L
574.VS.R
574.AS
Fully compliant to EN 1125
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
574.V
574.S
574.AS
n
Fully compliant to EN 179
Suitable for fire doors
Fire tested to EN 1634
(Timber door 120 min) **
Fire tested to EN 1634
(Steel door 120 min)**
581
Standards and testing
561
Briton 560-570 Series - Product selector
EN Classification
To EN 1125 - 377B1422AA
n
To EN 1125 - 377B1422BA
n
To EN 179 - 377B1452BA
571.2
573.N.1
573.N.2
581
n
n
n
n
n
n
9260 digital code unit
n
n
n
566.AK alarm unit
n
576.AK alarm unit
n
n
n
566.DK hold-open dogging unit
n
n
n
n
n
576.DK hold-open dogging unit
n
576.RE Top rod extension kit
n
n
n
n
n
n
n
n
n
n
574.STE easy clean floor socket
574.STP strike for PVCu doors
574.VS.R
571.1
1413E outside access unit
574.VS.L
Accessories
561
** - Nightlatch to be bedded on 1mm intumescent material
n
n
n
n
21
Briton 560-570 Series - Finishes
The modular nature of the Briton 560 and 570 Series
A
means the finish of the operator (561, 571 or 581) and
ES
:S
r
to
ra
e
Op
any additional pullman latch kits must be specified.
Various combinations are possible.
P
Architectural Finishes
lm
ul
an
The Briton 560 and 570 ranges are available in a
E
:S
:
r
to
a
r
pe
S
SE
choice of four metallic finishes in the combinations
shown opposite and below.
O
Combination A
All end box covers, pullman covers and cable covers
are supplied in a matching finish.
Please note, some small plastic components are
either black or grey.
Combination B
B
The operating push bar or touch bar only is supplied
in the metallic or powder coated finishes. The
:
or
SE
t
a
er
remaining components are supplied in a powder
coated semi matt black finish.
p
O
E
ul
P
O
Option B
Specify
Code
SES
SE
Satin Stainless Steel
(Electroplated)
-
SS
Polished Stainless Steel
(Electroplated)
-
PS
Polished Brass
(Electroplated)
-
PB
Silver (Powder coated)
M
:B
an
lm
Option A
Specify
Code
to
ra
pe
Finish - Operators
S
r:
Finish - Pullmans
SS
22
www.allegion.co.uk
PS
Specify Code
Silver
SE
Black
BM
PB
Briton panic and emergency exit - Accessories
Outside Access Devices
A series of outside access devices
ƒƒ Designed to suite with all Briton CE compliant exit devices
which can be used with any of the
ƒƒ Suitable for doors 40mm to 70mm thick
Briton 560 or Briton 570 Series panic
and emergency exit devices. They
provide a simple means of accessing
the door from the outside.
ƒƒ Fixings suitable for timber & metal doorsets
ƒƒ Powder coated for additional durability – silver, gold and brown bronze
ƒƒ Choice of plated finishes – satin stainless steel, polished stainless steel and polished brass
ƒƒ Clearly illustrated instructions and template enabling accurate installation
ƒƒ 5 year warranty
Briton 1413E/LE - lever variant
Briton 1413E/KE – knob variant
Briton 9260 digital code lock
ƒƒ A combination of market trends
ƒƒ Ergonomic design providing
ƒƒ Digital code lock option has over improved grip in wet conditions.
and the effect of legislation
2047 non sequential code options
regarding accessibility for less able
ƒƒ Supplied with euro-profile cylinder users has resulted in an increase in
as standard. Cylinders can be market demand for lever operation.
keyed-alike or master-keyed
ƒƒ Reversible lever operation for left ƒƒ The lever is secured to the OAD
ƒƒ Non-handed
by a special shear screw designed
to fail if the lever is severely
abused (e.g. attempted break
in, or vandalism) ensuring the
ƒƒ Supplied with extra long spindles for use with Briton exit devices
or right hand applications
ƒƒ Code can be changed by removing Note: not recommended for high use
the unit from the door
areas
ƒƒ Not suitable for use with 573.N
mechanism is protected from
damage. The shear pin can then be
simply replaced to restore normal
operation.
ƒƒ Lever supplied loose to allow easy
on-site handing
ƒƒ Supplied with euro-profile cylinder as standard. Cylinders can be keyed-alike or master-keyed
23
Briton 376 Series - Panic and emergency exit hardware
In distinct contrast to the modular nature of the
Briton 560 - 570 Series, the long established
Briton 376 Series is supplied as a complete
boxed product. Versions with pullman latches
or other additional features such as alarm
connection are specified as complete assemblies
which are identified by the following suffixes to
the product code:
24
www.allegion.co.uk
.P
with pullman latches
.N
with mortice nightlatch
.A
with alarm facility
.D
with manual dogging (hold-back function)
Briton 376 Series - Panic exit hardware
Testing and CE Marking
Rigorous testing is continually being carried out on the Briton range of exit hardware
providing peace of mind for specifiers, distributors, installers and users.
Low operating force
Repeatedly tested to operate at 50% lower than the standard requirement, ensuring that
the door can be operated with minimum force, for example by small children, the elderly and
people with special needs.
Two tests are undertaken. The first is to operate the door with a maximum force of 80
Newtons.
The second test simulates a panic situation whereby the door is put under 1000 Newton
pressure to simulate a group of people pushing against the door.
The operating force on the device with this weight should not exceed 220 Newtons.
Abusing the push bar
The push bar is attacked with a force equivalent to a 16 stone man
(1000 Newtons) pulling/pushing it in all directions and standing on
it, after which the bar must still operate.
Cycle testing
Briton 376 Series products exceed the highest requirement of 200,000 cycles, ensuring
durability for everyday use.
The finger trap test
To reduce the risk of trapping fingers and/or the blocking of the panic device, any gap shall
not trap a test rod of 10mm dia. at any position of the bar travel during the operation of the
panic device.
Abusing the bolt
Testing the bolt strength involves the equivalent of the combined strength of 4 people trying
to pull the bolt away from the door.
An attempted break-in is simulated to test the security of the bolt, force is applied to the
anti-thrust device as if the bolt were being ‘jemmied’ out of its socket.
Corrosion resistance
A test which measures how suitable the exit device is for varying environmental conditions.
All Briton 376 Series hardware has been tested to EN 1670 Building Corrosion Requirements
and has achieved at least grade 3 (high resistance). This ensures the product will function
correctly in wet, polluted and exterior environments. Note, EN 1670 test does not relate to
the finish.
25
Briton 376 Series - Panic exit hardware
EN1125 Classification - 376B1322AA
“The most important thing you must consider when specifying panic exit
hardware is who might be in the building in the event of an emergency.”
The following range consists of a vertical panic bolt, rim panic latch and a mortice
IMPORTANT NOTE - If you are in any
doubt at all ALWAYS use products
that conform to EN 1125
nightlatch operator. Each product is operated by a horizontal push bar which, when
pushed in a downward arc, withdraws either the bolts or the latch, releasing the
door for immediate escape in the event of an emergency.
Where personnel have not been trained in the location and operation of the
buildings exit devices or members of the public have access, exit devices
conforming to EN 1125 must be specified and installed.
Briton 376 vertical panic bolt
Briton 378 reversible rim panic latch
Briton 379.N mortice panic nightlatch
ƒƒTwo point locking for extra security
ƒƒSuitable for single doors and first ƒƒFor single doors and the first ƒƒAnti-thrust device, prevents opening leaf of double doors with rebated meeting stiles
ƒƒSupplied right hand, but can be unauthorised latch retraction
opening leaf of double doors
ƒƒSuitable for single and double door ƒƒSupplied in left or right hand, but applications
ƒƒFor doors up to 1300mm wide
ƒƒSelf-handed - will suit both left and ƒƒSuitable for doors up to 1300mm ƒƒSupplied with dual profile cylinder wide
mortice nightlatch, accepts both ƒƒSuitable for doors up to 2500mm ƒƒDouble door strike available for euro and oval profile cylinders high x 1300mm wide (extension (cylinder not supplied)
rods required to achieve max. sizes)
ƒƒManual dogging option (hold-open)
right handed doors
can be reversed on site
rebated double door applications
reversed on site
ƒƒAnti-thrust device prevents ƒƒOptional models include pullman ƒƒCan be used with rim cylinder fitted latches, alarmed and manually ƒƒAlarmed and manually dogged dogged (hold-open) functions
ƒƒMetal door variant with metal door ƒƒMetal door variant with metal door ƒƒAdjustable top and bottom shoots
ƒƒSupplied with easy clean socket
to the outside of the door
strikes & machine screws (378M)
unauthorised latch retraction
(hold-open) options
strikes & machine screws(379M.N)
ƒƒMetal door variant with metal door strikes & machine screws (376M)
Briton 377
Double rebated door panic set
Comprises a Briton 376 vertical panic
bolt, 378 reversible rim panic latch
& 378DDS double door strike in one
convenient pack.
For information on metal door options
please see page 9 for further details.
26
www.allegion.co.uk
Briton 376 Series - Emergency exit hardware
EN179 Classification - 376B1342BA
“These products should never be used in areas open to the general public.”
Products conforming to EN 179 are only intended for use by personnel who are
IMPORTANT NOTE - If you are in any
doubt at all ALWAYS use products
that conform to EN 1125
fully aware of the escape routes and have been trained to operate these devices.
The following range consists of a push pad vertical bolt, reversible push pad rim
latch and push pad mortice nightlatch. Each product when operated withdraws
either the bolts or the latch, releasing the door for immediate escape in the event
of an emergency.
Briton 372 push pad vertical bolt
Briton 1438 push pad rim latch
Briton 389.N push pad mortice nightlatch
ƒƒPad operated vertical bolt
ƒƒPad operated rim latch
ƒƒPad operated mortice nightlatch
ƒƒAnti-thrust device, prevents ƒƒSuitable for use on single doors and ƒƒSuitable for use on single and the the first opening leaf of rebated ƒƒSuitable for single and double double doors
ƒƒSupplied right hand, but can be ƒƒSupplied in left or right hand, but ƒƒSelf-handed to suit left and right ƒƒSecurity - Grade 4: 3,000 Newtons
ƒƒSuitable for doors up to 1300mm ƒƒSuitable for doors up to 1300mm ƒƒSecurity - Grade 4: 3,000 Newtons
wide
wide
ƒƒSuitable for doors up to 2500mm ƒƒSecurity - Grade 4: 3,000 Newtons
ƒƒSupplied with dual profile cylinder high x 1300mm wide (extension rods ƒƒDouble door strike available for mortice nightlatch, accepts euro are required to achieve maximum and oval profile cylinders (cylinder not supplied)
unauthorised latch retraction
door applications
handed doors
sizes)
can be reversed on site
rebated double doors
first opening leaf of double doors
reversed on site
ƒƒCan be used with a rim cylinder ƒƒAdjustable top and bottom shoots
ƒƒAnti-thrust device, prevents ƒƒSupplied with easy clean socket
ƒƒMetal door variant with metal door ƒƒMetal door variant with metal door ƒƒMetal door variant with metal door strikes & machine screws (372M)
fitted to the outside of the door
strikes & machine screws (1438M)
unauthorised latch retraction
strikes & machine screws (389M.N)
27
Briton 376 Series - EN 1125 panic applications
Briton 376 series panic and emergency exit hardware is suitable for application to single doors, and in
combinations on non-rebated and rebated double doors.
EN 1125 - panic applications
Vertical devices with top and bottom shoot bolts
376
376.A
376.D
378
378.D
Plain meeting stiles
379.N
379.NA
379.ND
Clockwise closing
Anti-clockwise closing
Left hand
Right hand
ISO. 5.0
ISO. 6.0
Plain meeting stiles
Rebated meeting stiles **
1st opening leaf
377
376
376.A
376.D
376
376.A
376.D
376
376.D
378
378.D
376
376.A
376.D
A378DDS
379.N
379.NA
379.ND
Plain meeting stiles
Rebated meeting stiles
Vertical devices with top and bottom pullman latches
Plain meeting stiles
Rebated meeting stiles **
Plain meeting stiles
1st opening leaf
376.P
376.PD
376.P
376.PD
376.P
376.PD
376.P
376.PD
378
378.D
376.P
376.PD
379.N
379.ND
A 378DDS
A Accessories required
** Consideration should be given to the use of door co-ordinating devices for rebated pairs of doors.
28
www.allegion.co.uk
A door co-ordinating device must be used for fire/smoke applications.
Briton 376 Series - EN 179 emergency applications
EN 179 - emergency applications
Vertical devices with top and bottom shoot bolts
1438
372
Plain meeting stiles
389.N
Plain meeting stiles
Rebated meeting stiles **
1st opening leaf
372
372
372
1438
372
389.N
A 378DDS
Vertical devices with top and bottom pullman latches
Plain meeting stiles
Rebated meeting stiles **
Plain meeting stiles
1st opening leaf
372.P
372.P
372.P
372.P
1438
372.P
389.N
A 378DDS
A Accessories required
** Consideration should be given to the use of door co-ordinating devices for rebated pairs of doors.
A door co-ordinating device must be used for fire/smoke applications.
29
376.A
378
378.D
377
379.N
379.NA
379.ND
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Emergency exit device
Vertical bolts
n
Rim latch
389.N
376.PD
n
1438
376.P
n
372.P
376.D
Panic exit device
372
Device Type
376
Briton 376 Series - Product selector
n
n
n
n
n
n
n
n
Rebated double door set
n
Mortice nightlatch
n
n
Pad operated vertical bolt
n
Pad operated rim latch
n
Pad operated mortice nightlatch
Features
Adjustable shoots
n
n
n
n
n
Push bar or shoots cut on-site
n
n
n
n
n
Self handed
n
n
n
n
n
Easy on-site handing
Handed - specify when ordering
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Dogged hold-open facility
n
n
n
n
n
n
n
n
n
n
C/W mortice cyl. nightlatch
Pullman latches top/bottom
n
n
n
Alarmed - requires power
n
n
n
n
n
n
Metal door variant available
n
n
n
n
n
5 year guarantee
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Powder coated silver
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Plated finishes
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Finishes
30
www.allegion.co.uk
376.A
378
378.D
377
379.N
379.NA
379.ND
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Fully compliant to EN 179
Suitable for fire doors
Fire tested to EN 1634
(Timber door 120 min) **
Fire tested to EN 1634
(Steel door 240 min)
389.N
376.PD
n
1438
376.P
n
372.P
376.D
Fully compliant to EN 1125
372
Standards and testing
376
Briton 376 Series - Product selector
EN Classification
376B1322AA
376B1342BA
372
372.P
1438
389.N
n
n
n
379.NA
n
379.N
n
377
n
378.D
n
378
n
376.A
n
376.PD
n
376.P
n
376.D
n
Accessories
376
379.ND
** - Nightlatch to be bedded on 1mm intumescent material
1413E outside access unit
n
n
n
n
n
n
n
n
n
n
9260 digital code unit
n
n
n
n
n
n
n
376ELTS extra long top shoot
n
n
n
n
n
n
Briton 816 rim cylinder
376FFKP flush face keeper
n
n
n
378DDS double door strike
376MDS metal door strike
378MDS metal door strike
379MDS metal door strike
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
31
Briton 376 Series accessories
Pullman latches
376ELTS - Extra long top shoot
378DDS - Double door strike
For doors that are subject to high levels
Extra long top shoots are suitable for
For use on double rebated door
of traffic, for example interconnecting
use on doors in areas that require the
applications with a rim panic latch on
doors in high populated areas, pullman
push bar to be in a lower position e.g
the first opening leaf and a vertical bolt
latches on a vertical panic bolt provide
schools. It can also be used on doors up
on the second opening leaf.
a smooth and quiet alternative.
to 3350mm high, however doors over
Available in a range of finishes.
Pullman latches are supplied as
2500mm are outside the scope of EN
standard on Briton 376.P, 372.P
1125 and EN 179.
and 376.PD. To upgrade existing
Available in a range of finishes.
installations, pullman latch kits
376/931 can be supplied separately.
Also available with metal threaded
screws (376M.P, 372M.P).
376FFKP - Flush face keeper plate
For applications where there is a flush
head frame a flush face keeper plate
can be used to secure the bolt.
Metal Door Applications
Briton 378MDS metal door strike for
Briton 379MDS metal box strike for
use with Briton 378 rim devices on
use with Briton 379.N mortice panic
single doors, or on the first opening leaf
nightlatch.
of a double rebated application.
All Briton exit devices are supplied with
self-tapping screws suitable for timber
and metal doorsets.
For customers who prefer machine
Briton 376MDS
screws, alternative fixing packs are
For vertical panic bolts. Comprises 2
available.
strike plates and 1 trip plate to activate
the top tripper
32
www.allegion.co.uk
Briton panic and emergency exit - Accessories
Outside Access Devices
A series of outside access devices
ƒƒ Designed to suite with all Briton CE compliant exit devices
which can be used with any of the
ƒƒ Suitable for doors 40mm to 70mm thick
Briton 376 Series panic and emergency
exit devices. They provide a simple
means of accessing the door from the
outside.
ƒƒ Fixings suitable for timber & metal doorsets
ƒƒ Powder coated for additional durability – silver, gold and brown bronze
ƒƒ Choice of plated finishes – satin stainless steel, polished stainless steel and polished brass
ƒƒ Clearly illustrated instructions and template enabling accurate installation
ƒƒ 5 year warranty
Briton 1413E/LE - lever variant
Briton 1413E/KE – knob variant
Briton 9260 digital code lock
ƒƒ A combination of market trends
ƒƒ Ergonomic design providing
ƒƒ Digital code lock option has over improved grip in wet conditions.
and the effect of legislation
2047 non sequential code options
regarding accessibility for less able
ƒƒ Supplied with euro-profile cylinder users has resulted in an increase in
as standard. Cylinders can be market demand for lever operation.
keyed-alike or master-keyed
ƒƒ Reversible lever operation for left ƒƒ The lever is secured to the OAD
ƒƒ Non-handed
by a special shear screw designed
to fail if the lever is severely
abused (e.g. attempted break
in, or vandalism) ensuring the
ƒƒ Supplied with extra long spindles for use with Briton exit devices
or right hand applications
ƒƒ Code can be changed by removing Note: not recommended for high use
the unit from the door
areas
ƒƒ Not suitable for use with 389.N
mechanism is protected from
damage. The shear pin can then be
simply replaced to restore normal
operation.
ƒƒ Lever supplied loose to allow easy
on-site handing
ƒƒ Supplied with euro-profile cylinder as standard. Cylinders can be keyed-alike or master-keyed
816 - Briton rim cylinder
ƒƒ For use with Briton 378 and 1438
ƒƒ Available in polished brass finish
33
Briton 376 Series - Finishes
All exit devices and outside access devices are
available in a wide range of finishes including:
Powder coated finishes
Silver (SE) finish is powder coated for increased
durability having been salt-spray tested in excess of
240 hours. We recommend you use Silver (SE) finish
for highly corrosive areas.
Metallic plated finishes
Satin stainless steel (SS), polished stainless steel
(PS), polished brass (PB)
Double door strikes and metal door strikes are
available colour matched.
Metallic Plated Finishes
Powder Coated Finishes
silver
(SE)
satin
stainless steel
(SS)
PS
po
lis
PB
he
d
st
lis
ai
SS
po
nl
es
s
st
he
d
br
polished
stainless steel
(PS)
polished
brass
(PB)
as
ee
s
l
sa
tin
st
ai
nl
es
s
st
ee
l
Due to the limitation of the printing process, we suggest you check your final choice
of finish against the actual products or sample swatch.
34
www.allegion.co.uk
Briton 560-570 Series - Technical data
56.5
Briton 560
561
574.V
574.S
43
20
Max. 1300
106
106
43
108
139
17
22.9
Briton 581
55
Max. 2500
100
43
43
Briton 570
108
139
17
56.5
26.7
82
571.1
65.5
139
52.5
571.2
L
25
L - 42
15
15
60
30
574.V
66
574.S
17
42
573.N.1
573.N.2
L
25
38.7
38.7
108
43
139
60
108
30
165
139
L - 42
66
17
25
42
Key:
L= 1200mm or 840mm
35
Briton 376 Series - Technical data
Briton 376, 376.D, 376.P, 376.PD, 376.A
L 1300 max.
165
L - 55
55
99
Briton 378E, 378.D
L 1300 max.
165
L - 55
99
55
Briton 379.N, 379.NA, 379.ND
76
57
99
25
108
165
165
L - 55
55
57
Door sizes
All products are suitable for use on doors up to 2500mm high x 1300mm wide. Minimum width of stiles 78mm
for 13mm rebates and 90mm for 25mm rebates. For doors with less than 665mm clear opening width please
seek advice from Technical Support on 0800 834102. For Briton 379.N, 379.NA & 379.ND minimum door thickness is 40mm and minimum width of stile is 88mm.
36
www.allegion.co.uk
Briton 376 Series - Technical data
165
Briton 372, 372.P
99
55
Briton 1438
Briton 1413E/LE
99
175
165
165
81
55
99
Briton 1413E/KE
99
25
165
87
108
165
165
76
57
175
Briton 389.N
55
55
57
99
55
37
Briton panic & emergency exit hardware - Testing & CE marking
EN classification codes
Under both standards (EN 1125 and EN 179), each product is classified and graded to identify
the level of compliance within each category. These classifications are set out below with the
additional element of 'Field of Door Application' introduced in the 2008 edition of EN 1125 and EN 179 shown highlighted.
It is mandatory for manufacturers to mark all panic and emergency exit devices with the new CE classification to
prove compliance with the latest standards.
There are 3 ways to be sure exit hardware meets the CE mark criteria:
1. - CE certificates are readily available for inspection.
2. - Products are regularly tested within a UKAS accredited testing facility as part of an ongoing audit test
programme.
3. - Products are manufactured on a production line that has been inspected and accredited under FPC (Factory
Process Control) conditions, a further requirement of the CE marking process. This ensures that correctly
specified materials and manufacturing methods are consistently employed.
3
(3)
Durability (Cycle Testing)
Grade 6 - 100,000 cycles
Grade 7 - 200,000 cycles
Grade 0 - not approved for fire/smoke door use
Grade A - approved for smoke door assemblies
Grade B - approved for use on fire & smoke door assemblies
Grade 3 - high resistance
Grade 4 - very high resistance.
6
Door size/mass
B
Class 7 - doors over 200kg.
Class 1 - projection up to 150mm
Class 2 - projection up to 100mm
1
Field of Door Application
Category B - Single door only
Category C - Double door only - inactive leaf only
38
www.allegion.co.uk
Class 6 - doors up to 200kg.
Safety
All panic and emergency devices have a critical safety
function therefore only grade 1 is identified.
3
(3/4)
2
Security
EN 1125
- Grade 2 - up to 1000N.
EN 179 - Grade 2 - 1000N
2
- Grade 3 - 2000N
- Grade 4 - 3000N
- Grade 5 - 5000N
A
Type of Operation
Type B - 'touch bar' operation
A
EN 179 Type A - 'lever handle' operation
Type B - 'push pad' operation
(1/2)
(A/B)
Category A - Single/Double door - active or inactive leaf
Class 5 - doors up to 100kg
(0/A/B)
(2-5)
Projection of Device
little incentive to exercise care.
7
(1)
Corrosion Resistance (EN 1670)
Class 3 = high frequency of use by public and others with
(6/7)
(5-7)
Fire Resistance (EN 1634)
Category of use
(A-C)
EN 1125 Type A - 'push bar' operation
Briton panic & emergency exit hardware - Technical data
Construction - 560-570 Series
Maintenance
Push bar device - 560 Series
Panic and emergency exit hardware play a vital role in the
The main and end casings are steel components, mounted on
buildings escape route, and it is important that these devices
a steel chassis and covered by a precision zinc die-cast cover.
are inspected and maintained properly to ensure safety at all
The steel latch is activated by a tubular steel bar.
times.
As recommended in EN 1125 and EN 179 the following routine
Touch bar device - 570 Series
maintenance checks should be undertaken at intervals
The main casing & rear bracket are constructed of steel
of not more than 1 month by the occupier or his approved
components mounted on a steel chassis and are covered by a
representative:
precision zinc die cast cover.
ƒƒ Inspect and operate the emergency exit device to ensure
The steel latch is activated by an extruded aluminium touch
all components are in satisfactory working condition
bar enclosed in an extruded aluminium channel.
ƒƒ Ensure that keepers are free from obstruction
Locking kits (574.V/574.S/574.VS/574.AS)
Fire/smoke
The locking points are constructed of steel components
Reference the Fire Precautions Act 1971, always consult the
mounted on a steel chassis incorporating a steel latch.
Local Fire Officer for his/her interpretation of the Act before
Connection to the push bar or touch bar device is via
finalising specification. Products within the Briton 560-570
adjustable stainless steel cable concealed by an extruded
and 376 series have been included in successful fire tests to
aluminium cover.
EN 1634 and/or BS 476 Part 22. Contact Technical Support on
0800 834102 for the precise field or application details.
Fixing/installation - 560-570 Series
These surface mounted devices come complete with easy
Guarantee
to follow pictorial fixing instructions. Self adhesive Accufit
To back up the high quality performance guarantee and
templates ensure accurate installation of backplates for
durability of Briton panic and emergency exit devices, they
mounting the operating mechanism and pullman latches.
are supplied with a 5 year guarantee on mechanical parts,
Mechanisms are clamped onto the backplates. Flexible steel
with free replacement ex-works of any panic and emergency
cables connecting the operating mechanism to the pullman
exit hardware proved defective by reason of either faulty
latches require no measuring and adjustment screws in the
manufacture or defect in materials.
main unit allow for fine adjustments. Clip on covers to the
main unit and pullmans complete the installation.
CE certification
The devices are supplied with non-standard tools for
Copies of our CE Certificates and declaration of performance
convenience, and adjustable strikers with packers to ensure
are available to download from our website:
continued optimum performance.
www.allegion.co.uk
Fixing and maintenance instructions must be passed on to
the user upon completion of installation.
Special applications
For special applications outside those mentioned within this
brochure please contact technical support on 0800 834102
who will be able to advise and assist with product selection
Construction - 376 Series
for non-standard installations.
Aluminium die cast body and end boxes, with extruded
aluminium guides. Solid steel shoot ends with tubular steel
Technical support
shoots and push bars. Latch bolts are manufactured from
If you have any queries regarding Briton exit devices
extruded brass.
and product selection please call our technical support
department who will be pleased to offer any assistance on
Fixing/installation - 376 Series
any aspect of our products including queries on:
Surface mounted and easily installed as fully described in the
bottom shoots allow 5mm adjustment to ensure accurate
ƒƒ
ƒƒ
ƒƒ
ƒƒ
fixing. Fixing and maintenance instructions must always
For further details call the Technical Support team on
be passed on to the user upon completion of installation.
freephone 0800 834102
fixing instructions. Bars and shoots are supplied with loose
end plugs and should be cut to exact size on site. Top and
Product selection
Advice on installation
Trouble shooting
Ancillary products and spare parts.
Supplied with either self tapping screws or metal thread
screws dependent on product selection.
Supply & quotations
The Briton 560-570 and 376 series are available through
a nationwide network of architectural ironmongers and
builders’ merchants.
For your local stockist please contact the Customer Care
Team on 01922 707400 or visit our website www.allegion.co.uk
39
Cl/Sfb
Uniclass
About Allegion
Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands
like CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. Focusing on security around the
door and adjacent areas, Allegion produces a range of solutions for homes, businesses,
schools and other institutions. Allegion is a $2 billion company, with products sold in
almost 130 countries.
For more, visit allegion.com
Allegion (UK) Limited
Bescot Crescent
Walsall
West Midlands
WS1 4DL
Tel: +44 (0) 1922 707400
Email: contactuk@allegion.com
Web: allegion.co.uk
July 2015
(31.59)
X
L4181