Papers Published in International / National Journals
Department of Civil Engineering
1. Nithya. R, Velumani. A, S.R.R. Senthil Kumar, “Optimal Location and Proximity
distance of municipal solid waste collection bin using GIS: A Case study of Coimbatore
city”, Issue 4, Vol. 8, pp. 107-119, 2012.
2. R. Nithya, A. Velumani, S.R.R Senthil Kumar, “A Decision Making Tool – Design of
Community Storage System for Sustainable Municipal solid waste management”,
International Journal of Engineering and Technology”, Vol. 5, No. 5, pp. 4234-4240,
2013.
3. Sakthivel, P.B. et al. (2014), "An Experimental Study on Mesh-and-Fiber Reinforced
Cementitious Composites", Concrete Research Letters, Vol.5(1), March 2014, pp.723-739.
4. Sakthivel, P.B. et al. (2014), "Experimental
and Predictive Mechanical Strength of
Fiber Reinforced Cementitious Matrix (FRCM)", International Journal of GEOMATE,
Japan, Accepted for Publication in Vol.7(1),13, September 2014, pp.993-1002.
Department of Computer Science & Engineering
1.
Ms.Mercy.W, Dr. P. S.K. Patra. An Efficient Processing of Twig Pattern Queries with
Dynamic XML Dissemination. International journal of Advanced Research in Computer
Science & Technology, 2(spl 1), 319-322.
2.
Ms.Anees.M, Dr. P. S.K. Patra. Accuracy Enhancement of Mining Association Rules.
International journal of Advanced Research in Computer Science & Technology,
2(spl 1), 335-337.
3. Mr. Kingsly Stephen R, Dr. P. S.K. Patra. An Improved Method for Efficient Data
Transmission in Wireless Sensor Networks. International journal of Advanced Research
in Computer Science & Technology, 2(spl 1), 303-305.
4. Mr.Yuvaraj.R, Dr. P. S.K. Patra. A Secure Content Unobservable on Demand
Routing Protocol for Mobile Ad-hoc Network. International journal of Advanced
Research in Computer Science & Technology, 2(spl 1), 412-416.
5. Mrs. S. Jayanthi, Dr. P. S.K. Patra. Major disease diagnosis and treatment Suggestion
system using data mining techniques. International journal of Advanced Research In
Computer Science & Technology, 2(spl 1), 338-341.
6. Mrs. Jessy Nirmal.A.G, Dr. P. S.K. Patra. Mitigating Vampire Attack in Wireless Ad
hoc Sensor Networks. International journal of Advanced Research in Computer Science
& Technology, 2(spl 1), 306-309.
7. Mr. Kingsly Stephen R, Dr. P. S.K. Patra. An Improved method for Data Gathering in
Wireless Sensor Networks using Mobile Collector. International journal of Advanced
Research in Computer Science & Technology, 2(spl 1), 426-430.
8.
Dr. P. S.K. Patra, Capacity Optimization in Manet Using Coco Topology. International
Journal of Emerging Technology & Research, 1(1), 150-154.
9.
Dr. P. S.K. Patra. Sfy: Search Engine for you on Android based Smart phones.
International Journal of Emerging Technology & Research, 1(1), 248-252.
10. Mr. Kingsly Stephen R. Data Collection in Wireless Sensor Networks - A Literature
Survey International Journal of Emerging Technology & Research, 1(1), 155-160.
11. Mr. Kingsly Stephen R. A Review on Clustering Algorithms in Wireless Sensor
Networks International Journal of Emerging Technology & Research, 1(1), 146-149.
12. Mr. Yuvaraj.R. A Survey on Secured On-Demand Routing Protocol for Mobile Ad-Hoc
Network. International Journal of Emerging Technology & Research, 1(1), 253-259.
13. Mr. Yuvaraj.R. A Protected Multi Authorizing Reprogramming Protocol for Wireless
Sensor Networks. International Journal of Emerging Technology & Research, 1(1),
271-275.
14. Mrs. S. Jayanthi. Survey on Single and Hybrid Mining Approaches in Heart Disease
Diagnosis International Journal of Emerging Technology & Research, 1(1), 219-224.
15. Mrs. S. Jayanthi. Creating Realistic Load Testing Scenarios & Load Test Data.
International Journal of Emerging Technology & Research, 1(1), 242-247.
16. Mrs. W. Mercy. Theoretical Analysis of an Algorithm Supporting Twig Pattern Queries.
International Journal of Emerging Technology & Research, 1(1), 141-145.
17. Mrs. Anees .M. A Complete Survey on Association Rules with Applicable to Different
Domain.International Journal of Emerging Technology & Research, 1(1), 215-218.
18. Mr. A. Naresh Kumar. An Investigation about Malware Detection Using Feature
Filtering.International Journal of Emerging Technology & Research, 1(1), 231-234.
19. Mr. Prakash .S. A Rudimentary Analysis of one Time Password in Contemporary
Scenario.International Journal of Emerging Technology & Research, 1(1), 235-237.
20. Mrs. Jessy Nirmal.A.G. Survey on Routing Protocols for Wireless Sensor Networks.
International Journal of Emerging Technology & Research, 1(1), 166-171.
21. Mrs. Sumitha.N, “Por Routing Protocol Implementation Design”, International Journal
of
Emerging Technology & Research, 1(1), 238-241.
22. Dr. P. S.K. Patra. Agent – Based Software Engineering. International journal of
Computational Engineering & Management, 15(6), 68-71.
23. Dr. P. S.K. Patra. Importance of Different Agents in Software Development.
International Journal of Engineering research and Technology, 1(10), 1-6.
24. Dr. P. S.K. Patra. Blocking of Illegal Websites in Student’s Mobile Using Android
Application. International Journal of Research in Engineering & Advanced Technology, 1(1),
1-4.
25. Dr. P. S.K. Patra. Segmentation Of 3D Brain Using an Adaptive K-means Algorithm.
International Journal of Research in Engineering & Advanced Technology, 1(1), 1-6.
26. Mrs. M. Jeyaselvi. Routing Disruptions in Wireless Sensor Networks. International
Journal of Research in Engineering & Advanced Technology, 1(1), 1-4.
27. Mrs. A. Karmel, Analysis of MANET Routing Protocols Based on Traffic Type.
International Journal of Research in Engineering & Advanced Technology, 1(1), 1-4.
28. Mrs. A. Karmel. Survey on Mitigation of DOS and DDOS Attacks in the Presence of
Clock drift. International Journal of Research in Engineering & Advanced Technology, 1(1),
1-8.
29. Mrs. S. Jayanthi. Detecting and Preventing Traffic Attack through Stepping Stones and
securing the information using watermarking. International Journal of Research in
Engineering & Advanced Technology, 1(1), 1-4.
30. Mrs. I. Anisha. Dynamic Service Integration Using SOA with Centralized
Orchestration. International Journal of Research in Engineering & Advanced Technology,
1(1), 1-5.
31. Mrs. Mercy. Survey on Service Oriented Architecture to Support the Deployment of
Web Services on Sensor Nodes. International journal of Computer Application Technology
& Research, 2(2), 180-184.
32. Dr. P. S.K. Patra. Automatic Diagnosis of Diabetes by Expert System. International
Journal of Computer Science, 9(2), 299-304.
33. Dr. P. S.K. Patra. An Expert System for Diagnosis of Human Diseases. International
Journal of computer Applications, 1(13), 71-74.
34. Dr. P. S.K. Patra. An Expert System for Diagnois of Human Diseases(ESDHD).
International Journal for Society of computer Sciences, (1), 19-24.
35. Dr. P. S.K. Patra. Development of an expert tool using Principal Component Analysis
(PCA) approach: for identifying human diseases & its severity. International Journal of
computer Applications, 1(13), 94-101.
36. Dr. P. S.K. Patra. Renewable Energy Source. International Journal of
Applications,1(17), 44-53.
computer
Department of Electronics and Communication Engineering
1. Ms.S.Chandravadhana “Compression of satellite image using lossy and lossless coding
techniques”, International Journal of Engineering and Technology, Vol.6, No.1, 2014,
pp.118-128.
2. Ms.R.Maheswari “A systematic literature review on efficient and reliable broadcast in
vehicular network” ,International Journal Electronics and Communication engineering,
Vol 6, No. 3(2013), pp.199-204.
3. Mr. P.Gnanasivam “Score based threshold for gender classification using finger print
ridge
parameters and physical size”, Wulfenia Journal, Vol 19, No 8(2012), pp.71-92.
4. Mr P.Gnanasivam “Finger print general classification using wavelet transform and
singular value decomposition”, International Journal of Computer Science ,Vol.9,Issue
2,No.3,March 2012,pp.274-282
5. Mr P.Gnanasivam “Estimation of age through finger prints using wavelet transform and
singular value decomposition”, International Journal of Biometrics and Bioinformatics,
Vol. 6, Issue 2, 2012, pp.58-67.
6. Mr P.Gnanasivam “Gender identification using finger print through frequency domain
analysis”, European Journal of Scientific Research, Vol. 59, No.2 (2011), pp.191-199.
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
1. Krishnamoorthy.A (2009). A Comparative Study of Design of Three Phase Induction Motor
using Optimization Techniques and Genetic Algorithms. International Journal of MC Square
Scientific Research, 1(1), 66-75.
2. Krishnamoorthy.A (2009). Application of Genetic Algorithms in the Design Optimization of
Three Phase Induction Motor. National Journal of Computer Applications, 2(4), 1-5.
3. Srinivasan Alavandar and M. J. Nigam (2009). Comparative Analysis of Conventional and
Soft Computing based Control Strategies for Robot Manipulators with Uncertainties.
International Journal of Computational Cognition,7(1), 52- 61.
4. Srinivasan Alavandar, Tushar Jain and M. J. Nigam (2009). Bacterial Foraging Optimized
Hybrid Fuzzy Precompensated PD Control of Two Link Rigid - Flexible Manipulator.
International Journal of Computational Intelligence Systems, 2(1), 51-59.
5. Srinivasan Alavandar and M. J. Nigam (2009). New Hybrid Adaptive Neuro Fuzzy
Algorithms for Manipulator Control with Uncertainties -Comparative Study.
ISA
Transactions, 48(4), 497-502.
6. Srinivasan Alavandar, Tushar Jain and M. J. Nigam (2009). Particle Swarm Optimized Hybrid
Fuzzy Precompensated Trajectory Control of Rigid-Flexible Manipulator. International
Journal of Knowledge-Based and Intelligent Engineering Systems,13(3-4), 155-167.
7. Krishnamoorthy.A (2010).A comparative study of optimized design of Three Phase Induction
Motor. National Journal of Technology, 6 (4), 24 – 29.
8. Tushar Jain, Srinivasan Alavandar, SVK Radhamohan, and M.J. Nigam (2010). GeneticallyBacterial Swarm Optimization: Fuzzy Pre-compensated PD Control of two link rigid-flexible
manipulator, International Journal of Intelligent Computing and Cybernetics, 3(3), 463 – 494.
9. Tushar Jain, Srinivasan Alavandar, M.J. Nigam (2010). A Hybrid Genetically-Bacterial
Foraging Algorithm converged by Particle Swarm Optimization for global optimization. Int.
J. Bio-Inspired Computation, 2(5), 340 -348.
10. Alavandar, S., Jain, T. and Nigam, M.J (2010). Hybrid bacterial foraging and particle swarm
optimisation for fuzzy precompensated control of flexible manipulator. Int. J. Automation and
Control, 4(2), 234–251.
11. S. G. Patil, S. Mandal, Srinivasan Alavandar, A V Hegde (2011). Neuro-Fuzzy based
Approach for Wave Transmission Prediction of Horizontally Interlaced Multilayer Moored
Floating Pipe Breakwater. Ocean Engineering, 38 (1), 186 –196. (Impact Factor: 1.178)
12. Annapoorani.S (2012). Three Phase High Power Quality Two-Stage Boost Converter.
International Journal of Engineering Science and Technology, 4(04), 1702 – 1712.
13. Krishnamoorthy.A (2013). Optimisation of Three Phase Squirrel Cage Induction Motor Using
Genetic Algorithm. Indian Streams Research Journal, 1(1), 115-121.
14. Krishnamoorthy.A (2013). Automatic Generation Control of Thermal-Thermal Two Area
Interconnected Systems using Anti Windup pi Controller. Australian Journal of Basic and
Applied Sciences, 7(11), 304-313.
DEPARTMENT OF INFORMANTION TECHNOLOGY
1. Dr.R.K.SelvaKumar "An Edge based Text segmentation from complex images", International
Journal of engineering Research & technology Vol No: 02, Issue No: 07,April 2013.
2. K.Sundaramoorthy " Novel method to provide security and maximum throughput in wireless
mesh networks", International Journal of Multidisciplinary research and advances in
engineering, Vol:5, No.III,JULY 2013
3. K.Sundaramoorthy "Improve the security in route discovery of AODV IN Wireless mesh
networks", European Journal of Scientific Research, Vol:103, No.III, PP:460-467, JUNE
2013
4. K.Sundaramoorthy "An Efficient routing method with the consideration of self-seeking nodes
in wireless mesh networks", International Journal of
innovative research and studies,
Vol:2.Issue.6, , PP:347-354, JUNE 2013
5. Mr.K.Sundaramoorthy ”Minimal Java”, International Journal
and Technology, June, 2013
on Innovation Engineering
6. Mr.K.Sundaramoorthy “Efficient method of detecting data leakage using misusability weight
measure”, International Conference on Innovation Engineering and Technology, June, 2013
7. A.Velmurugan“ Role of Digital image processing techniques in agriculture”,International
Conference, SRM university 15,Feb,2013
8. A.Velmurugan“Detection of skin cancer using IFS and Spatial Data Mining techniques”,
International Conference, SRM University 15,Feb,2013
9. T.AMUTHA "GSM based vehicle tracking system using tough sensor", National Conference
On Electronics, Communication And Signal Processing, Vol No: 02, Issue No: 07, April
2013
10. T.AMUTHA "Electronic ticketing using QR codes in a public transport network", National
Conference On Electronics, Communication And Signal Processing, Vol No: 02, Issue No:
07, April 2013
11. Mr.K.Arun Prasad " Execution of critical applications in untrusted environment", National
Conference On Electronics, Communication And Signal Processing, Vol No: 02, Issue No:
07, April 2013
12. Mr.K.Arun Prasad "Accessing constrained web services from mobile phones using multiple
authentication techniques", National Conference On Electronics, Communication And Signal
Processing, Vol No: 02, Issue No: 07, April 2013
13. Mr.R.Yuvaraj "Motion based video surveillance system for mobile clients", National
Conference On Electronics, Communication And Signal Processing, Vol No: 02, Issue No:
07,April 2013
14. Mrs.Nisturni Muthu "Load Balancing In grid computing using ARM algorithm", National
Conference On Electronics, Communication And Signal Processing, Vol No: 02, Issue No:
07, April 2013
15. Mr.K.Arun Prasad "Automatic Face Matching System", National conference on information
communication and networking, Vol No: 01, Issue No: 04, April 2012
16. Mr.K.Arun Prasad "Mobile agent for load balancing in heterogeneous network", National
conference on information communication and networking, Vol No: 01, Issue No: 04, April
2012
17. Mr.K.Arun Prasad "Soft Biometric Traits Based Face Matching System", National conference
on information communication and networking, Vol No: 01, Issue No: 04, April 2012
18. Mr.K.Arun Prasad "Inter –Packet delay based correlation for encrypted connection through
stepping stones", National conference on information communication and networking, Vol
No: 01, Issue No: 04, April 2012
19. Mr. R.Kingsly Stephen
"Dynamic resource allocation for efficient parallel data
processing in the cloud ", National conference on information communication and
networking, Vol No: 01, Issue No: 04, April 2012
20. Mr.R.Yuvaraj "Self Healing Mechanism For Identification Of Malicious", National
conference on information communication and networking, Vol No: 01, Issue No: 04, April
2012
21. Mrs.Nisturni Muthu "Data delivery properties of human contact networks", National
conference on information communication and networking, Vol No: 01, Issue No: 04, April
2012
22. Mr.K.Sundaramoorthy "Distinguishing DDoS Attacks from flash crowds in trace back
method", National conference on information communication and networking, Vol No: 01,
Issue No: 04, April 2012
23. Mrs. R.Vidhya "cooperative routing in static wireless networks",National conference on
information communication and networking, Vol No: 01, Issue No: 04, April 2012
24. Mrs. R.suvitha "Dynamic Replica placement for scalable ", National conference on
information communication and networking, Vol No: 01, Issue No: 04, April 2012
25. Mrs. Amirtha Ravichandran "Towards Ensuring Data Storage security in cloud computing",
National conference on information communication and networking, Vol No: 01, Issue No:
04, April 2012
26. Mrs. G.Keerthana "Efficient Geographic Multicast protocol for multihop mobile wireless",
National conference on information communication and networking, Vol No: 01, Issue No:
04, April 2012
27. Mrs. Amirtha Ravichandran "Multimedia Management for MANET In Cluster Based
Application", International conference on ACEEE, Vol No: 01, Issue No: 04, April 2011
28. Mrs. G.Keerthana "protecting peer-peer distributed networks from denial of service attacks"
International Conference On Electronics Computer Technology, Vol No: 01, Issue No: 04,
April 2011
29. Mr. S.Ramamoorthy "Multilevel intusion detection model using mobile agents in distributed
network environment",
International journal of computer science and information
security, Vol No: 08,Issue No: 02, April 2010
30. Mr. S.Ramamoorthy "Data mining based stratified intrusion detection", journal of computer
applications, ISSN:0974-1925, April 2010
31. Mr. S.Ramamoorthy "Malware detection using assembly and api call sequences",
international journal of computer virology, April 2010
32. Mr. S.Ramamoorthy "kernel machines for malware classification and similarity analysis",
international joint conference on neural networks, April 2010
33. Mrs.N.Gayathri
"security in wireless sensor networks", international conference on
computing communication and networking, Pp:1-6, April 2009
34. Mr.A.Velmurugan "Role of digital image processing techniques in agriculture", Proceedings of
international conference FACT-2009, Pp:1-6, April 2009
35. Mr.A.Velmurugan "Detection of skin cancer using IFS and Spatial data mining Techniques",
International conference on Global computing and communication (ICOGCAC”09), Pp:1-6, April
2009
Department of Mechanical Engineering
1. Gnanavelbabu A, Jerald Jand NoorulHaq A, “Multi objective Scheduling of Jobs, AGVs and
AS/RS in FMS using Non-Traditional Optimization Techniques”, (2008), International Journal
of Manufacturing Science and Production, Vol. 9, Nos. 1-2, pp 61-80.
2. Gnanavelbabu A, Jerald J, NoorulHaq A and Asokan P, “Simultaneous Scheduling of jobs,
AGVs and AS/RS in FMS using Artificial Immune System” (2009), International Journal of
Advances in Production Engineering and Management, Vol.4, No. 3, pp 139-150.
3. Gnanavelbabu A, Jerald J, Narendar K and NoorulHaq A, “Simultaneous Scheduling Machines
and AGVs in FMS Environment” (2009), Journal of Modern Manufacturing Technology, Vol.1,
No.1, pp.43-57.
4. Gnanavelbabu A, Jerald J and NoorulHaq A, “Scheduling of machines and AGVs in FMS
using Sheep Flock Heredity Algorithm”, (2009), International Journal of Industrial Engineering
Practices. Vol.1, No.2, pp.109-118.
5. Gnanavelbabu A, Jerald J and NoorulHaq A, “Simultaneous scheduling of Machines and
Automated Guided Vehicles in FMS using Differential Evolution”,(2010),International Journal
of Production Research. Vol.48, No.16, pp. 4683 – 4699.
6. Gnanavelbabu A, Jerald J and NoorulHaq A, “Particle Swarm Optimization for scheduling of
Machines and Automated Guided Vehicles in Flexible Manufacturing Systems”, (2010),
International Journal of Materials, Manufacturing and Optimization. Vol.1, No.1, pp.01-11.
7. Gnanavelbabu A, Dhivya S, Jerald J and NoorulHaq A, “Scatter search for scheduling of
Machines and Automated Guided Vehicles in Flexible Manufacturing Systems”, (2010),
International Journal of Production Technology and Management Research. Vol.1, No.1, pp.0918.
8. Gnanavelbabu A, Arunagiri P,Bhaskar GB and Muniraj R, “Theoretical Methodology for
Reduction of Industrial MUDA using Lean Six Sigma”, (2012), International Journal of
Production Technology and Management Research, Vol. 3, No.2,pp 117-120.
9. Gnanavelbabu A,Rambabu D, Bhaskar GB and Ratnakar, “Development of an Algorithm for
Nesting with Common Cut Methodology Using Identity Coordinator Function”, (2012),
International Journal of Production Technology and Management Research. Vol. 3, No.1, pp 110.
10. Gnanavelbabu A,Venkatesan N ,Bhaskar GB, Fredric J, Vigneshan S & Kalaiarasu R,
“Mechanical Behavior of Various Volume Fractions of High Density Polyethylene Nanoclay
Composite”, (2012), International Journal of Mechanical Engineering and Materials Sciences,
Vol. 5, No.1,pp 1-5.
11. Gnanavelbabu A,Rambabu D, Lenin A, and Bhaskar G.B, “Gap analysis and optimization of
process involved in product design and development by integrating enterprise resource planning
& product lifecycle management”,(2013),ELSEVIER, Procedia Engineering, Vol. 64,pp 983992.
12. Gnanavelbabu A and Arunagiri P, “Implementation of Lean Manufacturing System in Bogie
Assembly in Railway Coach Factory”, (2013), Applied Mechanics and Materials, Vol. 248, pp
511-515.
13. Gnanavelbabu A,Thirumalvalavan S, and Senthil R, “Effect of Heat Treatment on Tensile
Strength, Hardness and Microstructure of AZ61A Magnesium Alloy”, (2013), International
Journal of Metallurgical & Materials Science and Engineering, Vol. 3(4), pp 39-48.
14. Gnanavelbabu A and Arunagiri P, “Review on Reduction of Delay in manufacturing process
using Lean six sigma (LSS) systems”, (2013), International Journal of Scientific and Research
Publications, Vol. 3, No. 2, pp 1 - 4.
15. Gnanavelbabu A and Panneerdhass R,“Fatigue and creep life prediction for composites using
FEA”, (2013), International Journal of Mechanical Engineering and Materials Sciences, Vol. 6,
No.2, pp 171-180.
16. Gnanavelbabu A,Muthazhagan C, Bhaskar GB and Rajkumar K, “Influence of Graphite
Reinforcement on Mechanical Properties of Aluminum-Boron Carbide Composites”, (2014),
Advanced Materials Research, Vol.845, pp 398-402.
17. Gnanavelbabu A,Dhandapani N and Sivasankar M, “Failure Analysis of Cementless Hip Joint
Prosthesis”, (2014),Advanced Materials Research, Vol. 845, pp403-407.
18. Gnanavelbabu A,Mugendiran V and Ramadoss R, “Tensile Behavior of Al5052 Alloy Sheets
Annealed at Different Temperatures”, (2014), Advanced Materials Research, Vol. 845, pp431435.
19. Gnanavelbabu A, Muthazhagan C, Rajkumar K and Bhaskar G.B, “Corrosion behavior of
Aluminium-Boron carbide-graphite composites”, (2014), Applied Mechanics and Materials.
(Accepted for Publication)
20. Gnanavelbabu A, Martin Charles M, and Rajkumar K, “Evaluation of Mechanical Property of
Friction Welded EN24 Steel Joints” (2014), Applied Mechanics and Materials. (Accepted for
Publication)
21. Gnanavelbabu A and Loganathan D, “Formability Analysis of AA6061 Aluminium Alloy at
Room Temperature” (2014), Applied Mechanics and Materials. (Accepted for Publication)
22. Gnanavelbabu A, Sankar M, Baskaran R and Rajkumar K, “Abrasive Assisted Electro
Chemical Machining of Aluminum-Boron Carbide-Graphite Hybrid Composite” (2014), Applied
Mechanics and Materials. (Accepted for Publication)
23. Gnanavelbabu A, Panneerdhass R, Baskaran R and Rajkumar K, “Mechanical Properties of
Chopped Randomly Oriented Epoxy - Luffa Fiber Reinforced Polymer Composite” (2014),
Applied Mechanics and Materials. (Accepted for Publication)
24. Gnanavel Babu A, Senthil R and Ramadoss R, “Characterization of AZ61A Magnesium Alloy
at Elevated Temperature”, (2014), Applied Mechanics and Materials. (Accepted for Publication)
25. Gnanavelbabu A, Sankar M and R.Baskaran, “Optimization of Surface Roughness in Electro
Chemical Machining” (2014), Applied Mechanics and Materials. (Accepted for Publication)
26. Sudhagar K., Karikalan L. and Chandrasekaran M (2013), “ Comparative Studies on vegetable
oil usage in C.I Engines as an Alternative to Diesel Fuel, International Review of Mechanical
Engineering, Vol. 7, N.4, pp 705 – 715.
27. Sudhagar K., Balasubramanian M. and Rajarajeswari G. (2013), “A study on seamless
information sharing between robots in identifying the optimal path: An agent based approach”,
5th int. Nat. Conf on Advances in Communication, Networking & Computing.
28. Sudhagar K., Noorul Haq A. and Selvaraj T. (2009), ‘An Intelligent Genetic Fuzzy Approach
to the Truck baker Upper Problem’, International Journal of System Simulation, Vol. 2, No. 2.
pp. 611-616.
29. Sudhagar K., Noorul Haq A. and Selvaraj T. (2009), ‘Neuro-Fuzzy Based Adaptive Navigation
for Truck Like Mobile Robot’, International Journal of Soft Computing, Vol. 2, No. 7, pp. 727732.
30. Sudhagar K., Noorul Haq A. and Selvaraj T.(2008), ‘Navigation of Mobile Robot in an
Automated Industry using ANFIS Technique’, Journal of Industrial Engineering, Vol.1, No.7.
pp. 19-25.
31. Sudhagar K., Noorul Haq A. and Selvaraj T., (2008) ‘Particle Swarm Optimization Tuned
Fuzzy Control Approach to the Truck Backer Upper Problem’, International Journal of System
Simulation, Vol. 3, No. 1.
32. Sudhagar K., Noorul Haq A. and Selvaraj T., ‘Online Path Finder Algorithm for Mobile Robot
Navigation in Unmapped Region’, International Journal of System Signal Control and
Engineering Application (Under review).
33. Sudhagar K., Noorul Haq A. and Selvaraj T., ‘Application of Adaptive Neuro Fuzzy Network
to Control the Self Learning System’, International Journal of System Simulation (Under
review).
34. Vijay Ananth, S., Kalaichelvan, K. and Rajadurai, A. (2012) “Effect of Thermo Cycling
Process in Al6063/SiCp Composites”, European Journal of Scientific Research, ISSN 1450216X Vol. 88 No 3, pp.403-408.
35. Vijay Ananth, S., Kalaichelvan, K. and Rajadurai, A. (2012) “Optimization of Super plastic
Forming of Al6063/5%SiCp Composites Using Taguchi Experimental Design”, International
Review of Mechanical Engineering (I.RE.M.E.), ISSN 1970-8734, Vol. 6, No.6, pp. 1209-1213.
36. Vijay Ananth, S., Kalaichelvan, K. and Kumerason, M. (2012) “Effect of Temperature in
Superplastic Forming in Al6063/SiCp”, Composites Advanced Materials Research, Vol. 538541, pp. 1111-1114.
37. Narendranathan S.K. and Sudhagar K (2013), “Impact of Biodiesel on the performance &
Emission of CI Engine”, International Journal of Mechanical & Mechatronics Engineering
IJMME-IJENS Vol:14 No:01.
38. Thiyagu M., Shahul Hamid Khan., Prabhakaran G.,(2005) ‘A Particle Swarm Optimization
Algorithm For Permutation Flowshop Scheduling with regular and Non-Regular measures’, The
International Journal of Applied Management and Technology
39. A. Siddique Ahmed Ghias, B. Vijaya Ramnath , C. Elanchezhian, M. Jaivignesh, S. Rajesh, C.
Parswajinan (2014), Evaluation of mechanical properties of aluminium alloy–alumina–boron
carbide metal matrix composites, Materials & Design, Volume 58, Pages 332–338
40. A. Siddique Ahamed Ghias, K. Suresh, A. Sivarangar, N. Ramanan, (2013), Design and
optimization of engine valve by light, Volume 2, pp 167-169.
41. K. Suresh and A. Siddique Ahamed Ghias, (2013),” Investigation into cold upset forging of
sintered Aluminium square Preforms”, International Journal of Mechanical and Manufacturing
Technology , Volume 2, Issue 2 pp. 170-175.
42. Gnanavelbabu A, Prabhaharan P, Jerald J and NoorulHaq A, “Particle swarm optimization for
scheduling of machines and AGVs in FMS”, Proceedings of International conference on
Advances in Manufacturing Technology, IIT Madras, Feb-2008. pp.C86.
43. Gnanavelbabu A,NoorulHaq A and Jerald J, “ Multi objective scheduling of jobs, AGVs and
AS/RS in FMS using Sheaf Flock Heridity Algorithm”, Proceedings of International conference
on Advances in Manufacturing Technology, IIT Madras, Feb-2008. pp.C87.
44. Gnanavelbabu A, Jerald J, Prabhaharan P and NoorulHaq A, “Scheduling Optimization of
Machines and AGVs in Flexible Manufacturing Systems”, Proceedings of International
conference on Digital Factory, Coimbatore Institute of Technology, Coimbatore, Aug-2008. pp.
546-553.
45. Gnanavelbabu A, NoorulHaq A, Jerald J, Asokan P and Narendar K, “Simultaneous scheduling
of machines and AGVs by using AIS”, Proceedings of The 6th International Conference on
manufacturing Research 08, Brunel University, West London, September-2008, pp. 749-757.
46. Gnanavelbabu A,NoorulHaq A and Jerald J, “Artificial Immune system based scheduling for
Machines and Material Handling Systems in FMS”, Proceedings of2nd International and 23rd All
India Manufacturing Technology, Design and Research Conference, IIT madras, Dec 2008;
p.51-57.
47. Gnanavelbabu A, Jerald J and NoorulHaq A, “Multi objective scheduling of Machines and
Material Handling Systems in FMS Environment”, Proceedings of International Conference on
Supply chain Management and Information Systems, National Institute of Technology,
Tiruchirappalli, Dec 2008. pp. 696-703.
48. Gnanavelbabu A, Dhivya S, and NoorulHaq A, “Scatter search for Multi Objective Scheduling
Machines and AGVs in Flexible Manufacturing Systems”, Proceedings of International
conference on Advances in Industrial Engineering Applications, Anna University, Chennai, Jan
2010; pp. N29.
49. Gnanavelbabu A,Rambabu D, Bhaskar G.B and Ratnakar, “Development of an Algorithm for
Nesting with Common Cut Methodology Using Identity Coordinate Function”, Proceedings of
International Conference on Futuristic Trends in Mechanical Engineering, ICFTME 2012,
Thiruvalluvar College of Engg and Tech, Vandavasi, January 28th -29th, 2012.
50. Gnanavelbabu A, VenkatesanN, Muruganandam N and Bhaskar G.B, “A Critical review on
Nano clay related polymer composite material”, Proceedings ofInternational Conference on
Futuristic Trends in Mechanical Engineering, ICFTME 2012, Thiruvalluvar College of Engg.
and Tech, Vandavasi, January 28th -29th , 2012.
51. GnanavelbabuA ,Rambabu D, Lenin A and Bhaskar G.B, “Design and Optimization of
Material Selection through the Integration of Enterprise Planning and Product Lifecycle
Management”, (2013), Proceedings of International Conference on Engineering Materials and
Processes, Tagore Engineering College, pp 283-287.
52. Gnanavelbabu A,Senthilnathan D, Bhaskar G. B and Gopinath KGS4, “Characterization of
Glass Fibre – Coconut Coir– Human Hair Hybrid Composites”, (2013), Proceedings of
International Conference on Engineering Materials and Processes, Tagore Engineering College,
May-2013, pp 404-409.
53. Gnanavelbabu A and Panneerdhass R, “Fatigue and Creep Life Prediction for Composite
Material Using FEA”, (2013), Proceedings of International Conference on Engineering
Materials and Processes, Tagore Engineering College, pp 427-436.
54. Gnanavelbabu A,Arunagiri P and Bhaskar GB, “Redesign of Manufacturing Process flow for
UPCR Pump housing in Automobile Industry to Improve Productivity through Lean Production
Systems”, Proceedings ofInternational Conference on Engineering Materials and Processes,
Tagore Engineering College, May-2013, pp 464-468.
55. Gnanavelbabu A,Venkatesan N, Bhaskar G.B, and Poyyathappan K, “Effect of Nanoclay
(MMT) on Mechanical Properties of High Density Polyethylene Nanocomposites”, Proceedings
of International Conference on Engineering Materials and Processes, Tagore Engineering
College, May-2013, pp 568-571.
56. Gnanavelbabu A, Sankar M, Manikandan SK and Tamilarasan V, “Multi Objective
Optimization of Micro Electro Chemical Optimization Process”, (2013), Proceedings of
International Conference on Green Technology in Engineering and Applied Sciences,
Adhiparasakthi Engineering College, GTME 95.
57. Gnanavelbabu A, Jerald J and Noorul Haq A, “Multi objective scheduling of jobs, AGVs and
AS/RS in FMS using Artificial Immune System”, Proceedings of National conference on
Emerging trends in Engineering and Sciences, Bannari Amman Institute of Tech., Dec-2007, pp.
229-239.
58. Gnanavelbabu A, Noorul Haq A, Munikumar J and Jerald J, “Scheduling of machines and
AGVs in FMS using Sheep Flock Heredity Algorithm, Proceedings of National Conference on
Recent Advances in Manufacturing Management, Annamali University, Feb 2008.
59. Gnanavelbabu A, Venkatesan N, Fredric J, Vigneshan S, Kalaiarasu R and Bhaskar G B,
“Mechanical Behavior of Various Volume Fractions of High Density Polyethylene Nanoclay
Composite, Proceedings of National Conference on Research Trends In Mechanical
Engineering, NCRTME'12 , Vel’s University, Chennai. April 11, 2012.
60. Gnanavelbabu A, Rambabu D, Senthil Rajan U, Vasanthan KP and Bhaskar G.B, “Modeling of
Heavy Vehicle Break Drum through Static and Thermal Analysis using CAE”, Proceedings of
National Conference on Fascinating Advancements In Mechanical Engineering "FAME 2013",
RMK College of Engineering and Technology, March-2013, pp 154-158.
61. Gnanavelbabu A, Venkatesan N, Babu S, Jaheer Hussain S, Ashokraj, and Bhaskar G.B,
"Important Mechanical Properties in High Density Polyethylene Nano Composite", Proceedings
of National Conference on Fascinating Advancements In Mechanical Engineering "FAME
2013", RMK College of Engineering and Technology, March 2013, pp 185-188.
62. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., ‘System Architecture and
Methodology to Develop Mobile Robots’, National Conference Proceedings on Modeling and
Analysis of Production System, MAPS-2005, National Institute of Technology, Trichirappalli,
INDIA, January 2004, pp. 137-142.
63. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., ‘Task planning of autonomous
mobile robots using fuzzy heuristic control knowledge’, National Conference Proceedings on
NAME-2004, Jawaharlal National College of Engineering, Shimoga, Karnataka, INDIA,
February 2004, pp. 28-29.
64. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., ‘Genetic algorithm based safe path
planning of autonomous robot in uncertain Environment’, 21st AIMTDR Conference
Proceedings, Vellore Institute of Technology, Vellore, INDIA, December 2004, pp. 929- 935.
65. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., ‘Navigation of mobile robot by
evolutionary learning’, International Conference Proceedings on Emerging Technology in
Intelligent System and Control, EISCO-2005, Kumaraguru College of Technology, Coimbatore,
INDIA, January 2005, Vol. 3, pp. 437-441.
66. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., ‘Path planning of autonomous robot
by artificial intelligence’, International Conference Proceedings on Emerging Adaptive System
and Technology, EAST-2005, Noorul Islam College of Engineering, Kumaracoil, Kanyakumari
District, INDIA, December 2005, pp. 39- 47.
67. Narendranathan S.K., Sudhagar K , ‘ A study of biodiesel as an alternative fuel for
compression ignition engine’, IEEE International Conference Proceedings on ICAESM - 2012,
March 2012
68. Vijay Ananth. S, Dhanasekar, (2013) “Analysis of Super plastic forming in Al6063 alloy”,
International Conference on computational Intelligence and Advanced Manufacturing Research,
Vel’s University, Chennai.
69. Vijay Ananth S, Sethuraman and Viswapryia V (2013), “Extrusion analysis of Al6063/SiC
Composites”, Industrial Pollution and Control Technology,
Annamalai University,
Chidambaram.
70. Vijay Ananth S., Chandrasekhar P and K.Kalaichelvan, (2012) “Super plastic Forming in
Al6063/SiCp Composites”, ICMOC 2012, Noorul Islam University, Thakklai.
71. Vijayananth S., Ravi S and Kalaichelvan K. (2008), Forming And Analysis In Metal Matrix
Composites Al/SiC, IIT, Madras(Dec-2008)
72. Vijayananth S., Ravi S. and Kalaichelvan K. (2008), "Development and Super plastic forming
analysis of Al/SiC composite sheet", National conference on Advances in Robotics , Precision
Engineering & Manufacturing Techniques(AIRPAM2008) Madras Institute of Technology,
Anna University, pp. 38-43.
73. Vijay Ananth. S, Sundaram. S., Anantharaman. N., and Ravikumar. K., Proceedings of the
International, Conference on Mechanical Engineering 2003 (ICME2003) 26- 28 December
2003, Dhaka, Bangladesh.Vol:14 No:01.
Department of Science & Humanities
1. R. Siva Sankari Growth and characterization of diammonium copper disulphate hexahydrate
single crystal. Materials Research Bulletin , Vol 51,(2014) pp.372–37
2. G. Sasikumar . Development of a novel cost effective methanol electrolyzer stack with Ptcatalyzed membrane. Journal of Power sources , Vol 245,(2014), pp.161-167
3. G. Sasikumar . Development of nano-catalyzed membrane for PEM fuel cell applications.
Journal of Solid State Electrochemistry, Vol 17 , (2014) pp.2917-2925
4. B.J. Balamurugan. Group associated Petri nets in bio-computing. Lecture Notes in Computer
Science. Vol 7154, (2012), pp.270–271
Department of Management Studies:
1. Dr.Prabhu NRV, “Impact of Charismatic Leadership and Job Involvement on Corporate
Image Building “ , International Journal of Management, Vol.3, Issue 1, Jan-April 2012.
2. Dr.Prabhu NRV, “Critical Evaluation of a few Indian Entrepreneurs”, AMET International
Journal of Management, Vol.3, No: 2, Jan-June 2012.
3. Dr.Prabhu NRV, “ Impact of Work related Demographic Factors on Job Satisfaction of
Teaching Staff in Self-Financing Engineering Colleges” , IJEMR, Vol.2, Issue 3, March 2012.
4. Dr.Prabhu NRV, “Role of TQM in Strengthening Academia – Industry Interface”,
International Conference Publication of KLS’s Institute of Management Education and
Research, Belgaum, TATVA, Vol.IX, No: 2, July-Dec 2012.
5. Dr.Prabhu NR, “V Factors Affecting Intrapreneurship: A study of Indian Companies” ,
International Conference Publication of KLS’s Institute of Management Education and
Research, Belgaum, TATVA, Vol.IX, No: 2, July-Dec 2012.
6. Dr.Prabhu NRV,” A Global Strategy for Block Building Corporate and Nations in a
Millennium”, AIMS International Journal of Management, Vol.6, No: 3, September 2012.
7. Dr.Prabhu NRV, “Logistic Skill Gap in Supply Chain Sector”, AIMS International Journal of
Management, Vol.6, No:3, September 2012.
8. Dr.Prabhu NRV, “E-Trust, E-Loyalty in Online Banking”, AIMS International Journal of
Management, Vol.6, No:3, September 2012.
9. Dr.Prabhu NRV, “Employees Motivation in Organizations: An Integrative Literature Review”
, AIMS International Journal of Management, Vol.6, No: 4, December 2012.
10. Dr.Prabhu NRV, “Impact of Charismatic Leadership and Job Involvement on Corporate
Image Building”, International Journal of Management, Vol.3, Issue 1, Jan-April 2012.
11. Dr.Prabhu NRV, “ Critical Evaluation of a few Indian Entrepreneurs” , AMET International
Journal of Management, Vol.3, No: 2, Jan-June 2012.
12. Dr.Prabhu NRV, “ Impact of Work related Demographic Factors on Job Satisfaction of
Teaching Staff in Self-Financing Engineering Colleges” , IJEMR, Vol.2, Issue 3, March 2012.
13. Dr.Prabhu NRV, “ Role of TQM in Strengthening Academia – Industry Interface,
International Conference Publication of KLS’s Institute of Management Education and
Research, Belgaum, TATVA, Vol.IX, No: 2, July-Dec 2012.
14. Dr.Prabhu NRV, “Factors Affecting Intrapreneurship : A study of Indian Companies” ,
International Conference Publication of KLS’s Institute of Management Education and
Research, Belgaum, TATVA, Vol.IX, No: 2, July-Dec 2012.
15. Dr.Prabhu NRV , “ A Global Strategy for Block Building Corporate and Nations in a
Millennium” , AIMS International Journal of Management, Vol.6, No: 3, September 2012.
16. Dr.Prabhu NRV, “Logistic Skill Gap in Supply Chain Sector”, AIMS International Journal of
Management, Vol.6, No:3, September 2012.
17. Dr.Prabhu NRV, “E-Trust, E-Loyalty in Online Banking”, AIMS International Journal of
Management, Vol.6, and No: 3, September 2012.
18. Dr.Prabhu NRV, “Employees Motivation in Organizations: An Integrative Literature Review”
, AIMS International Journal of Management, Vol.6, No: 4, December 2012.
19. Dr. Mohan M , “ Customer Relationship Management Strategy : Business Intelligence and
Execution” , International Journal of Business Intelligence & Innovations (IJBII) page no.134
to 140, Volume 1 issue 1 , March, 2014.ISSN 2348-4705, Print.
20. Dr. Mohan M , “ Inventory and working capital management : An empirical analysis,” Asia
Pacific Journal of Research
21. ( APJR) A peer Reviewed International Journal, Page no. 111-122, Volume I, Issue XIV, Feb
2014.ISSN 2320 – 5504. Impact factor: 0.4337, Print.
22. Dr.Shakila MK, “Critical Thinking, A survival Factor – HRM in Recession period”, SRM
Management Digest, ISSN 0973-6905, Volume 7, April 2009
23. Dr.Shakila MK, “ Winners and losers of In-Car Entertainment Products” , Journal of
Management and Entrepreneurship, MTC Global, ISSN 2231-3710, Volume 1 Issue -2, July –
September 2011
24. Dr.Shakila MK. E-Marketing, Going down the wrong way, Researches World, Journal of Arts,
Science & Commerce (ISSN: 2231-4172), Volume IV, Issue -3(3), July 2013. Global Impact
Factor: 0.479
25. Dr.Shakila MK Corporate culture in Business Management, International Journal of current
engineering and Technology, ISSN 2277-4106 (Accepted for publication) June 2013. Global
Impact factor: 1.274
26. Dr.Shakila MK Foreign organized Retail Intervention versus Indian Unorganized Retail
Sector, Indian Journal of Management Science, ISSN: 2249-0280, E-ISSN: 2231-279X,
Volume III, Issue 2, April 2013, Global Impact Factor: 0.376.
27. Periasamy P. “Emerging trends in service sectors”, on March 4th and 5th 2010. J.V.Publishing
House,(publisher of Readers Shelf) Jodhpur, Rajasthan, Print.
28. Periasamy P. “ A Study on Commodity Derivative Market and Its Impact over Spot Market
with special reference to Selected Agricultural Produces in India” , Zenith International
Journal of Business Economics and Management Research (ZIJBEMR – Vol -3 (i) Jan 2013,
ISSN 2249-8826 with an impact factor of 0.431, Print.
29. Periasamy P. “ Commodity future market and new initiatives taken by the Forward market
commission in India to regularize and popularize commodity future market among potential
investors – A descriptive Study” , on Jan 2014, International Organisation of Scientific
Research-Journal in Business and Management (US) ; (H-36165) e-issn ; 2278-487x in
Volume:15 Issue 6, P-ISSN-2319-7668, January 2014, page No.01 to 09 with an impact factor
of 1.46, Print.
30. Periasamy P. “ A Study on Commodity Derivative Market of Selected Non Agricultural
products ( Gold, crude Oil, Copper) in the Chennai market – An Analysis”, February 2014,
page No.38-44, Volume2 Issue 6 with p-ISSN 2321-5925, e-ISSN 2321-5933, International
Organization of Scientific Research-Journal of Economics and finance (US) (R12036)
February 2014, page No.38-44, Volume2 Issue 6 with p-ISSN 2321-5925, e-ISSN 2321-5933
with an impact factor of 1.43 Print.
31. Periasamy, “ East Asia's roaring commodity markets losing their voice in the global market –
A Study, on April 2014, “IAJAM –
INDO ASIAN JOURNAL OF ADVANCED
MANAGEMENT” (ISSN 2250 - 1266), Volume-I, Issue-2, April, 2014), Print.