TL SERIES DIE-CAST THIN LINE DIE

advertisement
TL SERIES DIE-CAST
THIN LINE DIE-CAST LED EXIT SIGN
• Thin architectural profile
• Energy efficient design with as low as 1.5 Watt
power consumption
• Patented illumination technology provides
illumination approximately 4 times brighter
than the UL 924 requirement
• Battery diagnostic monitoring system
on all emergency units
• 3-Hour standard emergency run time
• Available in Master/Remote options
• Specialty finishes upon request
4-3/07
ISOLITE THINLINE SERIES DIE-CAST
Dimensions
Power Supply
Components
(back box removed)
WALL MOUNT
Rear View
CHEVRON
LEFT
Thickness
from wall = 5/8"
2 1/2"(Back Box Depth)
8 5/8"
7 1/2
3 3/4"
Rear cover
mounts flush
on wall
Standard 4-gang
Back Box
Centered on Rear Cover
8 1/2"
12"
LEFT END
MOUNT
4 5/8"
RIGHT END MOUNT
SINGLE OR DOUBLE FACE
Test Switch
and Status Indicator
EM Models only
5/8" Single
or Double Face
Specifications
Over all size: 12" x 8 1/2" x 5/8" – Single or Double
Weight: AC Model: 4.5 lbs.
EM Model: 5.25 lbs.
Construction: Two-piece, thick-wall, heavy-duty, die-cast aluminum
alloy assembly mounts to a standard 4-gang
electrical back box included
Letters: 6" High; 3/4" Stroke
Chevrons:
NFPA-type, universal field-selectable chevrons
Battery: Premium long-life high-temperature fused nickel
cadmium battery with ETL listed 3-hour run time
Input Power: AC Models: Red – 1.5 Watts; Green – 1.5 Watts
EM Models: Red – 2.5 Watts; Green – 2.5 Watts
.7 Power Factor
Approvals: Listed by ETL to UL 924 Standard and meets or
exceeds all performance standards as required
by NFPA 70, NFPA 101, EPA Energy Star, and OSHA
Features:• Patented illumination technology provides illumination approximately 4 times the UL 924
requirement
• Tamper-resistant hardware for face access standard
• Recessed power supply for all units
• Polycarbonate security cover and wireguards available
• Vandal resistant and tamper proof polycarbonate
shield available
• Master/Remote options available
• Specialty finishes available
• Recessed back box can be pre-installed at job-site
Electronics:• Unique electronic control circuit applies full-wave,
low-ripple current to each LED, optimizing light
output and life
• Battery diagnostic monitoring system on all
emergency units
• Zero current low-voltage disconnect
• Line-latch prevents unnecessary discharge
of battery during installation
• Brownout protection
• LED AC present indicator and push-to-test switch
• 120 or 277 VAC field-selectable inputs
Warranty:Isolite offers a 5-year limited warranty. For further
details, refer to General Warranty and Obligations
in Isolite manual.
Ordering Information
Series
Operation
TL
AC = AC Only
EM = NiCad Battery
LED
Faces
Housing Color
R = Red
S = Single BB = All Black
G = Green D = Double WW = All White
AA = All Brushed Aluminum
CC = Custom Color
Example: TL-Em-R-S-WW-WM-SD
Note: 1= EM Unit Only
Mounting
WM = Wall Mount
TM = Top Mount
LE = Left End
RE = Right End
PA = 12" Swivel Pendant
PB = 24" Swivel Pendant
PC = 36" Swivel Pendant
PD = 48" Swivel Pendant
Note: 2 = Consult Factory
Project ______________________________________________
Date ___________________________Type _________________
Catalog Number ______________________________________
Remarks ____________________________________________
Visit us on the web at www.isolite.com or email [email protected]
DL = Damp Location
FL = Flasher
BZ = Buzzer
BF = Buzzer/Flasher
TP = Tamperproof
Screws
SD - Self Diagnostics1
SDAL = SD w/Alarm
WG = Wireguard4
Note: 3= AC Unit Only
Options
2c = Dual Circuit3
VR = Vandal Resistant Lens
CW = Custom Wording2
SC = Polycarbonate Security Cover
MRTL = Master w/TL-VR Remote
MRFR = Master w/LPDC-FR Remote
FA = 12-24V Fire Alarm Interface
WL = Wet Location (See Max Series)
Note: 4 = Surface Mount Only
Call the Isolite office nearest you.
Headquarters
31 Waterloo Avenue
Berwyn, PA 19312
800-888-5483
610-647-8200
610-296-8952 Fax
Western office
3563 Sueldo, Suite M
San Luis Obispo, CA 93401
800-799-5343
805-546-9669
805-546-9564 Fax
Download