ALUMINUM ELECTROLYTIC CAPACITORS UE Chip Type , Vibration Resistance series Chip type with load life of 2000 to 5000 hours at 125°C. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2011/65/EU). UB UE Vibration Resistance Specifications Item Performance Characteristics Category Temperature Range – 55 to +125°C ( φ 12.5 to 20) – 40 to +125°C ( φ 8 , φ 10) Rated Voltage Range 10 to 50V Rated Capacitance Range 33 to 4700µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) 10 16 25 35 50 120Hz tan δ φ 8 • φ 10 0.26 0.20 0.16 0.14 0.14 20°C (MAX) φ 12.5 to φ 20 0.22 0.18 0.16 0.14 0.12 Tangent of loss angle (tan δ) Rated voltage (V) Stability at Low Temperature Impedance ratio Z– 40°C / Z+20°C (MAX) 10 16 25 35 50 φ 8 • φ 10 10 8 6 4 4 φ 12.5 to φ 20 8 6 3 3 4 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours (2000 hours for φ D = 8 and 10) at 125°C. Endurance 120Hz Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Shelf Life After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Black print on the case top. Chip Type 1 3 4 5 6 7 8 10 11 12 13 14 9 B±0.2 φ D±0.5 UUE 1 H 3 3 1 M NS 1 MS A±0.2 A2E 330 10V C±0.2 L±1.0 Lot N0. Size code Capacitance Tolerance (±20%) Rated capacitance(330µF) (φ12.5 to φ20) Rated voltage(50V) 0.5MAX. φD φD E L±1.0 Pressure relief vent Type A A±0.2 Series Capacitance Series name Series name C±0.2 B±0.2 φ D±0.5 330 µF UE 50V H1015 nichicon 0.3 MAX. A±0.2 Plastic platform Voltage Lot No. 8 to 18 2 0 NS 20 RS Rated voltage (50V) φ8 to φ10 The standard structure product is also available upon request, please refer to page142(UB series). Trade mark Configuration φD Code Capacitance Code RatedTolerance(±20%) capacitance (330µF) φD 8 to 18 H Pressure relief vent Package code φ8 10 Taping GS Package code φ12.5 to 20 Taping MS φ8 φ12.5 10 to Taping 20 TrayGS ZD φ12.5 to 20 Taping MS Size code φ12.5 to 20 Tray ZD Configuration A±0.2 0.3 MAX. Voltage 0.5 MAX. Plastic platform Capacitance E 125° C Marking Trade mark 2 Type numbering system (Example : 50V 330µF) U1 U E 1 H 3 3 1 M NS 1 MS 2 3 4 5 6 7 8 9 10 11 12 13 14 (φ8 to φ10) Aid electrode φ12.5 to φ20 The standard structure product is also available upon request, please ask for details. 10 10 2.9 3.2 2.9 3.2 B 8.3 10.3 E E 3.1 3.1 4.5 4.5 LL 10 10 1010 C C H (mm) 8 8 A B H H Type 8.3 10.3 8.3 8.3 10.3 10.3 12.5 12.5 16 4.8 5.4 4.8 16 5.4 18 6.4 18 6.4 (mm) 20 6.2 20 6.2 13.6 17.117.1 19.119.1 21.1 21.1 13.6 17.117.1 19.119.1 21.1 21.1 13.6 13.6 4.04.0 6.3 6.3 6.3 6.3 8.8 8.8 13.5,1616.5,21.5 16.5,21.5 16.5,21.5 13.5,16 16.5,21.5 21.5 21.5 1.1 1.51.51.01.0 to 1.4 1.0 to 1.0 to1.0 1.4to 1.3 1.7 to 1.7 1.1toto1.5 1.51.11.1to to to 1.4 1.01.4to 1.4 1.4to 1.3 Dimensions 10 1A V Cap.(μF) 33 47 100 220 330 470 Code 330 470 101 221 331 471 680 681 8 × 10 10 × 10 12.5 × 13.5 12.5 × 16 1000 102 12.5 × 16 2200 222 3300 4700 332 472 18 × 16.5 16 × 21.5 18 × 16.5 18 × 21.5 16 1C 25 1E 140 190 750 900 8 × 10 10 × 10 12.5 × 13.5 12.5 × 13.5 16 × 16.5 140 190 750 750 1000 900 18 × 16.5 1200 1200 1200 1200 1550 18 × 16.5 1200 In this case, 6 will be put at 12th digit of type numbering system, " " Frequency coefficient of rated ripple current Frequency 50 Hz 33 to 330 0.47 100 to 680 0.53 φ 12.5 to φ 20 1000 to 4700 0.74 φD φ 8 • φ 10 Cap.(µF) 120 Hz 0.67 0.67 0.87 300 Hz 0.78 0.82 0.96 1 kHz 10 kHz or more 0.91 1.00 0.89 1.00 0.98 1.00 8 × 10 10 × 10 12.5 × 13.5 16 × 16.5 18 × 16.5 16 × 21.5 18 × 21.5 35 1V 140 190 750 1000 1200 1200 1550 50 1H 8 × 10 10 × 10 12.5 × 13.5 16 × 16.5 16 × 16.5 18 × 16.5 100 150 550 1000 1000 1200 20 × 21.5 18 × 21.5 1400 1400 8 × 10 10 × 10 12.5 × 13.5 16 × 16.5 16 × 16.5 18 × 16.5 90 130 500 850 850 950 Case size φ D × L (mm) Rated ripple Rated ripple current (mArms) at 125°C 100kHz Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. CAT.8100D NS RS