Isolated RS232 + 1W Power

advertisement
Isolated RS232 + 1W Power
3.3V or 5V
Isolated
Power
REG
5V
T1IN
T1OUT
R1OUT
R1IN
T2IN
T2OUT
R2OUT
R2IN
RS232
BUS
LTM2882
Galvanic Isolation
Complete 1Mbps µModule® Transceiver Includes 2500VRMS Isolated Power—
No External Components Required
The LTM®2882 is an isolated RS232 transceiver that guards against large ground-to-ground differentials. The LTM2882’s internal
inductive isolation barrier breaks ground loops by isolating the logic level interface and line transceiver. An onboard DC/DC
converter provides power to the transceiver, with an isolated 5V supply output for powering additional system circuitry.
With 2500VRMS galvanic isolation, onboard secondary power and two RS232 drivers and receivers, the LTM2882 requires no
external components and provides a small, complete µModule solution for isolated serial data communications.
Features
Isolator µModule Technology
Isolated RS232 Transceiver: 2500VRMS
File #E151738
UL Recognized
Integrated Isolated, 1W DC/DC Converter
Good Efficiency (Up to 65%)
Low EMI
1.62V to 5.5V Logic Supply
High Speed Operation
1Mbps for 250pF/3kΩ Load
250kbps for 1nF/3kΩ Load
100kbps for 2.5nF/3kΩ TIA/EIA-232-F Load
3.3V (LTM2882-3) or 5V (LTM2882-5) Operation
No Damage or Latchup to ±10kV ESD HBM on Isolated
RS232 Interface and Across Isolation Barrier
High Common Mode Transient Immunity: >30kV/µs
Low Profile Surface Mount (15mm × 11.25mm × 2.8mm)
LGA and (15mm × 11.25mm × 3.7mm) BGA Packages
LTM2882 Demo Board
n
n
n
®
n
n
n
n
n
n
n
n
n
n
n
n
L, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are
registered trademarks and Isolator logo is a trademark of Linear Technology
Corporation. All other trademarks are the property of their respective owners.
Isolator µModule Technology
EW
5
6
7
8
RE RO VL ON
VCC
ND2
B
A
VCC2
TOP VIEW
1
To achieve greater than 2500VRMS
isolation, the LTM2882 utilizes
Isolator µModule Technology, which
uses coupled signal inductors
embedded in the µModule substrate.
This technique ensures consistent
ruggedness and reliability, and will
be certified by UL, CSA and IEC
to guarantee the isolation barrier’s
effectiveness. The μModule package
integrates several technologies to deliver a cost-effective,
advanced solution that minimizes board space and improves
electrical and thermal performance.
2
3
4
R2OUT T2IN R1OUT T1IN
5
6
DIN
ON
7
8
VL VCC
A
B
C
GND
D
E
F
G
H
J
K
GND2
L
R2IN T2OUT R1IN T1OUT DOUT DE
KAGE
25mm × 2.8mm)
VCC2
LGA PACKAGE
32-PIN (15mm × 11.25mm × 2.8mm)
T1IN
T1OUT = R1IN
2V/DIV
R1OUT
DI
2V/DIV
Common Mode Transient Immunity
Unlike other isolated solutions, the LTM2882 allows
communication through common mode transient events greater
than 30kV/µs, unaffected by the transient and without introducing
any priority data jitter or data corruption.
RO
MULTIPLE SWEEPS
OF COMMON MODE
TRANSIENTS
500V/DIV
50ns/DIV
Isolated Supply Voltage Output
300
250
VCC2 CURRENT (mA)
The LTM2882 is self-powered and provides a well regulated 5V, up to 1W,
isolated supply for powering any supporting components on the isolated
bus side. This regulated power is continuously available over the operating
temperature range, even while driving RS232 compliant signal levels.
200
150
VCC = 5.0V
LTM2882-5
VCC = 3.3V
LTM2882-3
100
T1OUT AND T2OUT
50 BAUD = 100kbps
RL = 3k, CL = 2.5nF
VCC2 = 4.8V
0
–50 –25
25
75
0
50
TEMPERATURE (°C)
TEST
FREQUENCY
EN 61000–4–3 80MHz to 1GHz
Annex D
1.4MHz to 2GHz
2MHz to 2.7GHz
EN 61000–4–8 50Hz to 60Hz
Level 4
EN 61000–4–8 60Hz
Level 5
EN 61000–4–9 Pulse
Level 5
FIELD
STRENGTH
10V/m
3V/m
1V/m
30A/m
100
125
RF & Magnetic Field Immunity
The LTM2882 passes independent RF and magnetic field immunity test
requirements per European Standard EN55024, in accordance with the following
test standards: EN 61000-4-3 for radiated, radio frequency, electromagnetic field
immunity; EN 61000-4-8 for power frequency magnetic field immunity;
EN 61000-4-9 for pulsed magnetic field immunity.
100A/m*
1000A/m
*non-IEC method
www.linear.com/2882 n 1-800-4-LINEAR
0412E
Download