P O W E R I N G
DPGF1U SERIES
T E C H N O L O G Y
FRONT ACCESS/CONNECT
GMT DISTRIBUTION PANELS
DESCRIPTION
UNIPOWER’s DPGF1U Series of all Front
Connected GMT fuse distribution panels
provide distribution and overload protection
for 4/6 or 8/12 circuits. The one mounting
position (1.75 inches) high GMT fuse panels
provide 4/6 single-bus fuses or 8/12 dual-bus
(A&B) fuses (4 or 6 per bus). They distribute up
to a total of 160 amperes of load current from
two separate 80-ampere sources with true A
and B distribution and alarm capabilities.
LVD2006/95/EC
ROHS2011/65/EU
A and B sections of the dual-bus panel are
isolated and can be separately configured for
12, 24/48 volts and are polarity neutral.
Fuse sizes are ½ to 20 amperes. Fuse trip and
power off alarm is indicated by an LED for each
bus and one Form C relay contact per bus.
The panels come with brackets that permit
mounting in either a 19- or 23-inch relay rack.
They can be mounted from the front of the
rack with offsets every quarter-inch from front
to back to align with existing rack-mounted
equipment.
FEATURES
All Connections Made at the Front
One Mounting Position High: 1.75”
19- or 23-Inch Rack Mounting
GMT Fuses, ½A to 20A
Single Bus with 4 or 6 Fuses
Dual Bus (A/B) with 4 or 6 Fuses per Bus
Bus Capacity: 80A per Bus
Operating Voltage: 12, 24/48VDC
POLARITY NEUTRAL
A & B are Isolated Loads
A & B Can Be Separately Configured
Status LED
One Form C Relay Contact per Bus
TWO-YEAR WARRANTY
SAFETY COMPLIANCE
UL60950-1 2nd Edition
CSA22.2, No. 60950-1 2nd Edition
EN60950-1 2nd Edition
STANDARD MODELS
VOLTS
EACH
FEED
MODEL
NUMBER
DPGF1U-A1-4
24/48
DPGF1U-A6-4
12
DPGF1U-A1-6
24/48
DPGF1U-A6-6
12
DPGF1U-A1-4-B1-4
24/48
DPGF1U-A6-4-B6-4
12
DPGF1U-A1-6-B1-6
24/48
DPGF1U-A6-6-B6-6
NOTE:
12
INPUT
FEEDS
FUSES
POSITIONS
AMPS
EACH
BUS
TOTAL
AMPS
1
4 x ½ to 20A
64
64
1
4 x ½ to 15A
2 x ½ to 20A
80
80
2
4 x ½ to 20A
Each Feed
64
128
2
4 x ½ to 15A
2 x ½ to 20A
Each Feed
80
160
The above are standard configurations. For voltage combinations not shown
see the configuration guide on page 2 of this datasheet.
GMT FUSE
ORDERING GUIDE
AMPS
COLOR
½
Red
401-1500-0010
Brown
401-1500-0020
¾
PART NUMBER
1
Gray
401-1500-0030
1⅓
White
401-1500-0040
2
Orange
401-1500-0050
3
Blue
401-1500-0060
5
Green
401-1500-0070
10
Red/White
401-1500-0080
12
Green/Yellow
401-1500-0090
15
Red/Blue
401-1500-0110
20
Green/White
401-1523-0000
Dummy
401-1500-0100
NOTE: Fuses need to be ordered individually and
are shipped with each panel as separate items for
field installation.
www.unipowerco.com
NORTH AMERICA CALL: +1-954-905-1071 • LATIN AMERICA CALL: +1-954-905-1078 • EUROPE CALL: +44 1903 768200
P O W E R I N G
DPGF1U SERIES GMT DISTRIBUTION UNITS - 2
T E C H N O L O G Y
SPECIFICATIONS
Typical at 25°C Unless Otherwise Noted.
INPUT / OUTPUT
Panel Capacity......................................................................................................80A Per Bus, 160A Total
Configuration...............................................................................................Single Bus with 4 or 6 Fuses
.................Dual Bus with 4 or 6 Fuses Each
Fuse Type.................................................................................................................................................................GMT
Fuse Capacity 1............................................4 x 15A max. with 2 x 20A max. OR 4 x 20A max.
Voltage 2
24/48V Version..................................................................................................................................21-60VDC
12V Version....................................................................................................................................... 10.5-15VDC
Polarity............................................................................................................................................Polarity Neutral
ALARMS
Alarm Indicator.................................................................................................... Dual-Color LED Per Bus
LED Status Indication......................................................................................................... Green = Normal
.Red = Fuse Trip Alarm
.Off = No Powe
Alarm Connections................................................................One Form C Relay Contact Per Bus
SAFETY COMPLIANCE.............................UL60950-1 2nd. Ed., CSA22.2 No.950-1 2nd Ed.,
.EN60950-1 2nd. Ed.
ENVIRONMENTAL
Operating Temp. Range........................................................................................................-10°C to +70°C
Storage Temp. Range............................................................................................................-40°C to + 85°C
Humidity......................................................................................................0% to 95%, Non-Condensing
PHYSICAL SPECIFICATIONS
Case Material........................................................................................................................................................Steel
Finish....................................................................................................................................... Powder Coat Black
Dimensions, Inches (mm)..........................................................................1.75 H x 19.00 W x 9.00 D
.(44.5 x 483 x 229)
Weight..........................................................................................................................................8.38 lbs. (3.80kg.)
Rack Mounting Width..........................................................................................................19 or 23 Inches
CONNECTIONS
Input Connections.............................................................................Crimp Type Lug or ¼ - 20 Stud
Output Connections.....................................................................Barrier Terminal Strips, No. 6-32
Chassis Ground Connection................................................................................................No. 8-32 Stud
Alarm Relay Connections..................................................Spring Clamp Terminals,16-26AWG
NOTES:
1. See table for fuse sizes.
2. See Ordering Guide to specify voltage.
FRONT VIEW
17.12 (434.9)
A Input
¼-20 Studs
Alarm LED A
Alarm Contacts
A SIDE
B
A
T
0.34”
1
1
2
3
4
5
6
5
0.625”
1.48”
B SIDE
B
A
T
6
FA
1
1
NO-C-NC
R
T
N
0.5”
A Outputs
#6-32
Terminal Strip
B Input
¼-20 Studs
Alarm LED B
NO-C-NC
2
3
4
5
6
5
6
1.74
(44.2)
FA
R
T
N
B Outputs
#6-32
Terminal Strip
A Side Fuses
Ground
#8-32 Stud
B Side Fuses
Case depth: 8.94 (227.1)
2.28
(57.8)
CONNECTION DETAILS
0.625”
Crimp Lugs for input bus bars
should be ordered separately.
For a kit of 4 two-hole lugs for
#6AWG wire order part number
775-1434-0000.
0.375”
Clear Perspex Safety Cover
(supplied as standard)
0.65”
0.34”
0.5”
0.32”
1.48”
Connectors are Phoenix Contact
spring clamp type. Wires (16-26AWG)
do not require any termination.
ALL DIMENSIONS IN INCHES (mm).
ORDERING GUIDE
CODE
VOLTAGE
1
24/48V
6
12V
Model: DPGF1U-A --B -
POLARITY NEUTRAL - May be connected
for Positive or Negative Ground operation.
CODE
FUSE CONFIGURATION
4
4 X ½ to 20A
6
4 x ½ to 15A
2 x ½ to 20A
2. The sum of all fuse currents on either side must not exceed 80 Amperes.
© 2016 UNIPOWER LLC
This document is believed to be correct at time of publication and Unipower LLC accepts no responsibility for consequences from printing errors or inaccuracies. All specifications subject to change without notice.
UNIPOWER LLC • 3900 Coral Ridge Drive, Coral Springs, Florida 33065, USA • sales@unipowerco.com
North America: +1 954-905-1071 • Latin America: +1 954-905-1078 • Europe: +44 1903 768200
dpgf1u-ds-revF1-0816.indd
Notes: 1. If section B is not used a blank panel is installed at the factory and the “-B” is not
required in the model number (see Standard Model tabel on page 1).