Effective October 1st, 2005
Manufacturer:
Model Number:
Serial Number:
Craftguard’s Use Only!
Hot Salt Blue (Black Oxide)
3624 Logan Avenue - Waterloo, Iowa 50703-1049
Ph: (319) 232-2959 - Fax: (319) 234-0804
www.craftguard.com
Craftguard Disassemble & Reassemble Firearm:
Prices
Most Firearms: (Except double barrels, single barrel trap and semi-auto military rifles.) $ 50
Double Barrels, Single Barrel Trap and Semi-Automatic Military Rifles $ 90
Invoice
Codes
01G050
02G090
The following prices are for disassembled firearms!
** $ 138
Rifle or Shotgun Complete Firearm Including Parts (Except Double Barrels)
Double Barrel Complete Firearm Including Parts
** $ 148
Handgun Complete Firearm Including Parts
** $ 148
$ 122
Rifle or Shotgun Single Barrel AND Receiver/Action (no parts)
$ 135
Rifle or Shotgun Double Barrel AND Receiver/Action (no parts)
$ 88
Rifle or Shotgun Single Barrel (no parts)
$ 100
Rifle or Shotgun Double Barrels (Barrels only – no parts)
$ 88
Rifle Action or Shotgun Receiver (no parts)
$ 88
Pistol Slide (no parts)
$ 88
Pistol Frame (no parts)
$ 75
Pistol Barrel (no parts) Except single shot pistol barrel.
$ 100
Single Shot Pistol Barrel (no parts)
$ 110
Revolver Frame (no parts)
$ 75
Revolver Barrel (no parts) Except top break revolver barrel.
$ 100
Top Break Revolver Barrel (no parts)
01S088
02S098
03S098
04S072
05S085
06S038
07S050
08S038
09S038
10S038
11S025
12S050
13S060
14S025
15S050
Additional Charges/Services Pertaining to Hot Salt Bluing
$ 1
Blue extra or misc. small parts such as screws & pins (cost per part)
Blue larger extra or misc parts such as trigger guard or mag tube (each) $ 5
$ 1
** Blue more than 40 parts per firearm (each minor part over 40)
$ 25
Blue Sword, Knife or Bayonet (each)
Blue a “Nickel Steel” Firearm: (Note: “Nickel Steel” will be printed on barrel.) $ 25
$ 10
Apply finish to aluminum trigger guard or floor plate (1st part)
st
Gold Plate Trigger (1 part)
TOTAL: Add column. Transfer amount to page four (4) of “Work Order Form”.
24G001
25G005
26G001
70G025
21S025
54G010
63G020
$ 20
$
Refer to reverse side of this page (or page R2) for finishing options concerning cast iron
receivers or case harden parts. Also, pricing for preparing hexagonal or octagonal rifle barrels.
Page R1
Note: Barrels soft soldered MUST be rust blued. Silver soldered or brazed barrels may be hot salt blued.
If Craftguard can not determine metal used to fasten barrels together, the barrels will be rust blued.
Effective October 1st, 2005
Hot Salt Blueing
3624 Logan Avenue - Waterloo, Iowa 50703-1049
Ph: (319) 232-2959 - Fax: (319) 234-0804
www.craftguard.com
(Black Oxide) Continued
Cast iron and case harden steel may turn a reddish color over time. Also, Winchester Model
94 receivers serial numbers between 2,700,000 and 6,000,000. The following are options
Invoice
available to cover the reddish color:
Prices
Codes
1. Do nothing. If the parts turn a reddish color that is OK with the owner of the
firearm. “X” or check the box to the right if this is the option you choose.
2. DuPont “Teflon” the parts in semi-gloss black color. No additional charge for
this service. “X” or check the box to the right if this is the option you desire.
73G000
74G000
3. “Guard-Coat” parts in flat black color. No additional charge for this service.
75G000
“X” or check the box to the right if this is the option you desire.
4. “Guard-Coat” PLUS parts in matte black color. Write the price in the
appropriate space at the right if this is the option you desire.
5. Electroless nickel plate parts with bright nickel finish. Write the price in the
appropriate space at the right if this is the option you desire.
6. Electroless nickel plate parts with dull matte nickel finish. Write the price in
the appropriate space at the right if this is the option you desire.
7. Silver plate parts with bright silver finish. Write the price in the appropriate
space at the right if this is the option you desire.
8. Iron plate and blue parts. Write the price in the appropriate space at the right if
this is the option you desire. Tentatively service available summer of 2006.
$ 30
76G030
$ 30
77G030
$ 30
78G030
$ 30
79G030
$
80G000
?
Polish (and draw file) Octagonal or Hexagonal Rifle Barrel:
No additional charge for
economical blending polishes.
Surface oxidation removed for better finish adhesion.
Economical Blending Polish: (Corners not sharpened nor pits removed.)
Economical Blending/Hunter: (Bead blast with silica sand.)
82G000
83G000
84G000
85G000
Economical Blending/Matte: (Bead blast with medium glass beads.)
Economical Blending/Satin: (Bead blast with fine glass beads.)
Coarse: (Polish to #100 grit.)
Medium: (Polish to #240 grit.)
Fine: (Polish to #400 grit.)
Extra Fine: (Polish to #600 grit.)
Edges sharp & no waves on flats!
Edges sharp & no waves on flats!
Edges sharp & no waves on flats!
Edges sharp & no waves on flats!
Edges WILL NOT be as sharp as deluxe polish
Extremely time consuming!
High Gloss: (Buffing marks not visible.) and slightly rounded.
NitreBlue (Straw color for Lugers) Parts:
First Minor Part or One Part Only
Additional Minor Parts: (each)
$ 15
$ 25
$ 35
$ 50
$ 300
86G015
87G025
88G035
89G050
$ 10
$ 3
57G010
58G003
90G300
Stamp Caliber and/or Cartridge on Rifle Barrel. Clearly print exact
stamping desired and indicate location. Select stamp size and specify by “x” or
$ 20
checking box for either 1st, 2nd, 3rd, or 4th gun.
1/8"
3/18"
Other Services (Specify):
TOTAL: Add column. Transfer amount to page four (4) of “Work Order Form”.
Page R2
1/8G020
3/16G020
91G000
$