8760 Technical Data Sheet (English)

advertisement
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
8760 Multi-Conductor - Shielded Twisted Pair Cable
For more Information
please call
1-800-Belden1
General Description:
18 AWG stranded (16x30) tinned copper conductors, polyethylene insulation, twisted pair, overall Beldfoil®
shield (100% coverage), 20 AWG stranded tinned copper drain wire, PVC jacket.
Physical Characteristics (Overall)
Conductor
AWG:
# Pairs AWG Stranding Conductor Material
1
18
16x30
TC - Tinned Copper
Total Number of Conductors:
2
Insulation
Insulation Material:
Insulation Material Wall Thickness (in.)
PO - Polyolefin
0.018
Outer Shield
Outer Shield Material:
Outer Shield Trade Name Type Outer Shield Material
Beldfoil®
Coverage (%)
Tape Aluminum Foil-Polyester Tape w/Shorting Fold 100
Outer Shield Drain Wire AWG:
AWG Stranding Drain Wire Conductor Material
20
7x28
TC - Tinned Copper
Outer Jacket
Outer Jacket Material:
Outer Jacket Material
Nom. Wall Thickness (in.)
PVC - Polyvinyl Chloride 0.028
Overall Cable
Overall Nominal Diameter:
0.222 in.
Pair
Pair Color Code Chart:
Number Color
1
Black & Clear
Mechanical Characteristics (Overall)
Operating Temperature Range:
-20°C To +60°C
Bulk Cable Weight:
25 lbs/1000 ft.
Max. Recommended Pulling Tension:
54 lbs.
Min. Bend Radius/Minor Axis:
2.250 in.
Applicable Specifications and Agency Compliance (Overall)
Applicable Standards & Environmental Programs
NEC/(UL) Specification:
CM
CEC/C(UL) Specification:
CM
AWM Specification:
UL Style 2092 (300 V 60°C)
EU Directive 2011/65/EU (ROHS II):
Yes
EU CE Mark:
Yes
EU Directive 2000/53/EC (ELV):
Yes
EU Directive 2002/95/EC (RoHS):
Yes
EU RoHS Compliance Date (mm/dd/yyyy):
01/01/2004
EU Directive 2002/96/EC (WEEE):
Yes
Page 1 of 2
08-26-2016
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
8760 Multi-Conductor - Shielded Twisted Pair Cable
EU Directive 2003/11/EC (BFR):
Yes
CA Prop 65 (CJ for Wire & Cable):
Yes
MII Order #39 (China RoHS):
Yes
Flame Test
UL Flame Test:
UL1685 UL Loading
Suitability
Suitability - Indoor:
Yes
Plenum/Non-Plenum
Plenum (Y/N):
No
Plenum Number:
88760, 87760 or 82760
Electrical Characteristics (Overall)
Nom. Inductance:
Inductance (µH/ft)
.18
Nom. Capacitance Conductor to Conductor:
Capacitance (pF/ft)
27.200
Nom. Conductor DC Resistance:
DCR @ 20°C (Ohm/1000 ft)
6.5
Max. Operating Voltage - UL:
Voltage
300 V RMS
Max. Recommended Current:
Current
7.2 Amps per conductor @ 25°C
Put Ups and Colors:
Item #
Putup
Ship Weight
Color
8760 060U1000
1,000 FT
27.000 LB
CHROME
Notes
Item Desc
2 #18 LDPE SH PVC
8760 060U500
500 FT
14.000 LB
CHROME
2 #18 LDPE SH PVC
8760 0601000
1,000 FT
27.000 LB
CHROME
8760 06010000
10,000 FT
270.000 LB
CHROME
CY
2 #18 LDPE SH PVC
8760 06010001
10,000 FT
270.000 LB
CHROME
CZ
2 #18 LDPE SH PVC
8760 06015000
15,000 FT
435.000 LB
CHROME
CY
2 #18 LDPE SH PVC
8760 0602000
2,000 FT
54.000 LB
CHROME
C
2 #18 LDPE SH PVC
8760 060250
250 FT
7.000 LB
CHROME
8760 060500
500 FT
14.000 LB
CHROME
C
2 #18 LDPE SH PVC
8760 0605000
5,000 FT
145.000 LB
CHROME
C
2 #18 LDPE SH PVC
2 #18 LDPE SH PVC
2 #18 LDPE SH PVC
Notes:
C = CRATE REEL PUT-UP.
Y = FINAL PUT-UP LENGTH MAY VARY -10% TO +20% FROM LENGTH SHOWN.MAY CONTAIN 2 PIECES. MINIMUM LENGTH OF ANY ONE PIECE IS 1500'.
Z = FINAL PUT-UP LENGTH MAY VARY (+ OR -) 10% FOR SPOOLS OR REELS AND(+ OR -) 5% FOR UNREEL CARTONS FROM LENGTH SHOWN.
Revision Number: 3
Revision Date: 08-02-2012
© 2016 Belden, Inc
All Rights Reserved.
Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to
change without notice, and the listing of such information and specifications does not ensure product availability.
Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for
any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether
in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with EU RoHS (Directive 2002/95/EC, 27-Jan-2003). Material manufactured prior to the compliance date may be in stock at Belden facilities
and in our Distributor’s inventory. The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is
correct to the best of Belden’s knowledge, information, and belief at the date of its publication. The information provided in this Product Disclosure is designed only as a general guide for the
safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification.
Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the
product.
Belden declares this product to be in compliance with EU LVD (Low Voltage Directive 2014/35/EU).
Page 2 of 2
08-26-2016
Download