PSBOX100™
INSTALLATION INSTRUCTIONS
drawing number 105962
PSBOX100 LAYOUT
This product must be installed in accordance with applicable national and local electrical and construction
codes by a person familiar with the construction and operation of the product and the hazards involved.
!
Failure to comply with the following installation instructions may result in death or serious injury.
OPEN BOX
MOUNTING OPTIONS
3
"
16
[183mm]
7
15
"
16
[253mm]
9
1
"
4
[260mm]
13 "
[330mm]
10
WALL INSTALLATION
3
7 "
16
[183mm]
1
"
4
[260mm]
10
CLEARANCE HOLE FOR 1/4" -20 (M6) HARDWARE
(NOT INCLUDED)
WIRING INSTRUCTIONS - AS DELIVERED
!
WARNING
!
DO NOT EXCEED CONTROL BOX
SPECIFIED VOLTAGE.
SEPARATION OF FIELD INSTALLED POWER
LIMITED CIRCUIT (DIMMING/CONTROL)
WIRING FROM THE BRANCH CIRCUIT
WIRING IN THE OUTLET BOX ARE
TO BE MADE IN ACCORDANCE WITH LOCAL
AND/OR NATIONAL ELECTRICAL
INSTALLATION CODES.
WARNING
!
DO NOT USE IF PARTS OR
CONNECTORS ARE DAMAGED.
!
WARNING
WARNING
120V IN
POWER SUPPLY
24V OUT
BLOCK CONNECTOR COLOR CODE
LIVE (BLACK)
NEUTRAL (WHITE)
GROUND (GREEN)
1.BLUE
2.ORANGE
24V+
24V-
BLOCK CONNECTOR COLOR CODE
1.BLUE
24V+
2.ORANGE
24V-
DISCONNECT POWER BEFORE INSTALLING OR
SERVICING TO AVOID ELECTRICAL SHOCK.
CAUTION
UNAUTHORIZED FIELD REPAIRS WILL
VOID WARRANTY
CONNECTION STEPS
STEP 1 - 120-277V INPUT
STEP 2 - OUTPUTS TO FIXTURES (UP TO 6)
LIVE (BLACK)
GROUND (GREEN)
120-277V
INPUT
NEUTRAL (WHITE)
SUITABLE STRAIN RELIEF DEVICE
TO BE PROVIDED BY INSTALLING
CONTRACTOR.
24V+
24V-
FINAL
120-277V
POWER SUPPLY
CLOSE BOX
24V OUT
GROUND (GREEN)
NEUTRAL (WHITE)
LIVE (BLACK)
24V OUTPUT
TO FIXTURE
24V+
24V-
120-277V
INPUT
24V OUTPUT
TO FIXTURE
OUTPUT QUANTITY DEPENDS
ON PROJECT LAYOUT.
UP TO 6 OUTPUTS TO FIXTURES.
ADD UP ALL FIXTURE RUN
LOADS AND BE SURE THEY DO
NOT EXCEED THE
CAPACITY OF THE PSBOX.
24V OUTPUTS TO FIXTURES
p.1/2
2013.01.16
EM - R1
24V OUTPUT
TO FIXTURE
(TYPICAL 2
CONDUCTOR
CABLE)
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6 1.877.937.3003 P. 514.937.3003 F. 514.937.6289
info@lumenpulse.com www.lumenpulse.com
Copyright © Lumenpulse 2013
Lumenpulse reserves the right to make changes to this product and related instructions at any time without prior notice
and such changes shall be effective immediately. See www.lumenpulse.com/support/downloads for current data and instructions.
PSBOX100D™
INSTALLATION INSTRUCTIONS
drawing number 105962
PSBOX100D LAYOUT
24V DC OUTPUTS
This product must be installed in accordance with applicable national and local electrical and construction
codes by a person familiar with the construction and operation of the product and the hazards involved.
!
Failure to comply with the following installation instructions may result in death or serious injury.
OPEN BOX
MOUNTING OPTIONS
3
"
16
[183mm]
7
15
"
16
[253mm]
9
1
"
4
[260mm]
13 "
[330mm]
10
WALL INSTALLATION
3
7 "
16
[183mm]
1
"
4
[260mm]
10
CLEARANCE HOLE FOR 1/4" -20 (M6) HARDWARE
(NOT INCLUDED)
WIRING INSTRUCTIONS - AS DELIVERED
!
WARNING
!
DO NOT EXCEED CONTROL BOX
SPECIFIED VOLTAGE.
WARNING
!
DO NOT USE IF PARTS OR
CONNECTORS ARE DAMAGED.
!
WARNING
SEPARATION OF FIELD INSTALLED POWER
LIMITED CIRCUIT (DIMMING/CONTROL)
WIRING FROM THE BRANCH CIRCUIT
WIRING IN THE OUTLET BOX ARE
TO BE MADE IN ACCORDANCE WITH LOCAL
AND/OR NATIONAL ELECTRICAL
INSTALLATION CODES.
120V IN
POWER SUPPLY
24V OUT
DIMMING MODULE
0--10V IN
0--10V OUT
GROUND (GREEN)
NEUTRAL (WHITE)
LIVE (BLACK)
BLOCK CONNECTOR COLOR CODE
1.BLUE
WARNING
BLOCK CONNECTOR COLOR CODE
DISCONNECT POWER BEFORE INSTALLING OR
SERVICING TO AVOID ELECTRICAL SHOCK.
1.BLUE
24V+
2.ORANGE
24V-
3.GREY
0-10V+
4.WHITE
0-10V-
2.ORANGE
24V+
24V-
3.GREY
0-10V+
4.WHITE
0-10V-
CAUTION
UNAUTHORIZED FIELD REPAIRS WILL
VOID WARRANTY
CONNECTION STEPS
STEP 1 - 120-277V INPUT
STEP - 2 DATA INPUT
STEP 3 - OUTPUT TO FIXTURES (UP TO 6)
120-277V
INPUT
GROUND (GREEN)
NEUTRAL (WHITE)
LIVE (BLACK)
DATA
INPUT
24V+ DIM
24V - DIM
0-10V0-10V+
SUITABLE STRAIN
RELIEF DEVICE
TO BE PROVIDED
BY INSTALLING
CONTRACTOR.
FINAL
120V IN
24V OUT
DIMMING MODULE
0--10V IN
0--10V OUT
120-277V
INPUT
24V DIMMING
OUTPUTS
TO FIXTURES
GROUND (GREEN)
NEUTRAL (WHITE)
LIVE (BLACK)
0-10V0-10V+
DATA
INPUT
POWER SUPPLY
CLOSE BOX
24V+ DIM
24V - DIM
OUTPUT QUANTITY DEPENDS
ON PROJECT LAYOUT.
UP TO 6 OUTPUTS TO FIXTURES.
ADD UP ALL FIXTURE RUN
LOADS AND BE SURE THEY DO
NOT EXCEED THE
CAPACITY OF THE PSBOX.
24V DIMMING OUTPUTS TO FIXTURES
p.2/2
2013.01.16
EM - R1
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6 1.877.937.3003 P. 514.937.3003 F. 514.937.6289
info@lumenpulse.com www.lumenpulse.com
Copyright © Lumenpulse 2013
Lumenpulse reserves the right to make changes to this product and related instructions at any time without prior notice
and such changes shall be effective immediately. See www.lumenpulse.com/support/downloads for current data and instructions.
24V DIMMING
OUTPUT
TO FIXTURE
(TYPICAL 2
CONDUCTOR
CABLE)