REULAND
PARTIAL MOTORS
Stator and Rotor Sets
Copyright 2011 Reuland All Rights Reserved
REULAND PARTIAL MOTORS
Release: Jan 2012
Stator & Rotor Sets
MECHANICAL FEATURES
•
•
•
•
•
•
•
•
All Reuland Partial Motors are available as stator and rotor sets or as individual
components.
Vast selection of diameters and core lengths are available as standard. Special
lengths are available upon request.
High pressure die cast aluminum rotors include cooling fins and balancing lugs.
Cooling fins and balancing lugs are removed on high speed applications. Fabricated
rotors and encapsulated end rings are available for special performance
characteristics.
Large straight bore rotors are available with oversized diameters or tapered bore
upon request and keyways where required.
Maximum bore shown is for die cast rotors without keyway. Fabricated rotors
generally allow for larger bores.
Shell type motors may be furnished with standard length or extended length shells
made from cold roll or stainless steel. Shells are also available with heavy wall
thickness and grooved for customer liquid cooling.
High temperature, oil resistant, three foot leads are standard.
Solid magnetic shaft material is generally required for large rotor bores and
maximum horsepower designs.
ELECTRICAL FEATURES
•
•
•
•
•
•
•
•
•
0.02 to 1100 horsepower, maximum performance designs, depending on speed and
cooling.
Vast selection of frame sizes available for three enclosure types: Liquid Cooled
(TELC), Fan Cooled (TEFC), Non Vented (TENV).
2 through 6 poles available as standard, higher upon request. Multi-speed also
available.
Consult factory regarding extremely low speed applications.
Squirrel cage induction, NEMA design B and inverter duty is standard.
Stator windings for up to 600 volts are standard.
High silicon electrical steel, fully insulated, to reduce core losses, allow standard
designs to operate up to 120 hertz. Special low loss laminations with minimum core
loss are available for high frequency applications to 3000 hertz.
Premium class H insulation system with high temperature polyester varnish is
standard.
Customer is responsible for cooling partial motors.
Reuland
17969 E. Railroad St. – Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
2
REULAND PARTIAL MOTORS
Release: Jan 2012
Stator & Rotor Sets
IMPORTANT CONSIDERATIONS
•
•
•
•
•
•
Selection of 2, 4 or 6 pole stator and rotor sets generally depends on the application
requirement. The 2 pole version offers higher speed capabilities compared to 4 pole
and 6 pole versions. The 4 pole version offers highest power density in smallest
package with large rotor bore. The 6 pole version offers higher torque at low speed
and allows for even larger rotor bore.
For uniform air gap and optimum balance, rotor diameters can be furnished rough for
customer to finish turn and balance after the rotor is installed on the shaft.
Maximum speeds shown are limited by the centrifugal forces acting on the rotor and
are based upon the standard rotor bore. An oversize bore or deep keyway may
reduce these values. High speed rotor/shaft combinations should have balancing
rings in order to allow for the delicate trim balance required.
Stator and rotor sets are identified with their model or serial number, along with a
stamped loose nameplate.
A certified dimension drawing is available for each motor. Always review these
dimensions or call the factory before releasing order to production on new designs.
The power tables list the power capabilities of stator and rotor sets at various speeds
for three enclosure types (TELC, TEFC and TENV). The sets are listed by frame size
which is representative of the stator outside diameter and core length.
Reuland
17969 E. Railroad St. – Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
3
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
2 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
315 - 0.98
315 - 2.17
315 - 3.15
315 - 3.94
354 - 1.77
354 - 2.36
354 - 3.15
354 - 3.94
419 - 1.77
419 - 2.56
419 - 3.15
419 - 3.94
419 - 4.72
472 - 1.50
472 - 2.25
472 - 3.00
472 - 3.75
472 - 4.75
472 - 5.75
472 - 6.75
472 - 7.75
532 - 1.50
532 - 2.00
532 - 2.75
532 - 4.25
532 - 5.75
532 - 7.25
622 - 2.00
622 - 2.75
622 - 3.87
622 - 4.25
622 - 5.75
622 - 7.25
622 - 10.75
782 - 1.69
782 - 2.44
782 - 2.94
782 - 3.94
782 - 5.44
782 - 6.94
782 - 7.94
782 - 8.94
782 - 9.94
782 - 10.94
945 - 2.94
945 - 3.44
945 - 4.69
945 - 5.94
945 - 7.94
945 - 9.94
945 - 11.94
945 - 13.94
1063 - 2.75
1063 - 4.00
1063 - 6.00
1063 - 7.00
1063 - 9.00
1063 - 10.50
1063 - 12.50
1063 - 14.50
1063 - 16.50
POWER TABLE - LIQUID COOLED (TELC)
60
3600
100
6000
0.1
0.35
0.65
0.85
0.4
0.7
1
1.3
0.6
1
1.4
1.9
2.3
0.8
1.5
2.3
3.2
4.3
5.4
6.5
7.5
0.93
1.5
2.4
4.2
6.3
8
2.7
3.8
5.5
6.4
9.4
12
18
4.2
6.3
7.8
10.5
15
19
21.5
24
27
30
11.5
15.5
21
27
36
45
54
63
15
22
33
38
49
57
68
79
90
0.28
0.8
1.25
1.6
1
1.4
1.9
2.4
1.4
2.3
3.2
4.3
5.2
1.8
3.3
4.7
6.2
7.8
9.5
11
12.5
2
3.1
4.8
8.3
12
15
4.8
6.8
10.5
12
16
20
30
7
10.5
13
17.5
24.5
31
36
40
45
50
22
26
35
45
60
75
90
105
25
37
55
63
82
95
113
131
150
200
300
400
500
600
700
800
900
12000 18000 24000 30000 36000 42000 48000 54000
POWER (HP)
0.75
1.2
1.6
2
2.4
2.8
3.2
3.6
1.8
2.7
3.6
4.5
5.4
6.3
7.2
8.1
2.7
4.1
5.4
6.8
8.1
9.5
11
12
3.5
5.3
7
8.7
10.5
12
14
15.5
2.2
3.3
4.4
5.5
6.6
7.7
8.8
3
4.5
6
7.5
9
10.5
12
4
6
8
10
12
14
16
5.1
7.7
10.2
13
15.5
18
20.5
3.8
5.7
7.6
9.2
10
5.7
8.4
11
13.5
15
7.2
10.6
14
17
19
9.2
13
17.5
21
23.5
11
16
21
25.5
28.5
4.7
7.4
9.4
11
12.5
7.5
11
14
16.5
18.5
10
14.5
18.5
21.5
24
12.5
18
23
27
30
16
23
29
34
38
19
28
35
41
46
22
33
42
49
55
25
38
48
56
62
5
7.5
9.5
11
7.3
11
14
16.5
11
16.5
21
24.5
17.5
26
33
38
24
36
45
52
30
45
57
66
10.1
15.5
20
14.5
23
29.5
21.5
32
41
23.5
35
45
32
48
62
40
61
78
60
90
115
14
21
21.5
32
26
39
35
53
49
74
63
95
72
108
81
122
90
135
100
150
40
50
47
58
64
79
81
100
108
133
135
166
162
199
189
232
45
66
98
114
147
171
204
237
270
Reuland
17969 E. Railroad St. - Industry, CA 91749
Phone: (626) 854-7440
Max. speed
(r/min)
Std. rotor: 54000
Std. rotor: 48000
Std. rotor: 36000
Std. rotor: 36000
Std. rotor: 30000
Std. rotor: 25000
Spl. rotor: 40000
Std. rotor: 19000
Spl. rotor: 30000
Std. rotor: 16000
Spl. rotor: 25000
Std. rotor: 14000
Spl. rotor: 21000
www.reuland.com
Email: partialmotorsales@reuland.com
4
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
2 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
1181 - 5.56
1181 - 7.06
1181 - 9.06
1181 - 10.06
1181 - 11.06
1181 - 13.06
1181 - 15.06
1181 - 17.06
1181 - 19.06
1338 - 5.00
1338 - 7.50
1338 - 9.50
1338 - 12.00
1338 - 14.50
1338 - 17.00
1338 - 19.00
1338 - 21.00
1476 - 4.63
1476 - 5.63
1476 - 7.13
1476 - 9.13
1476 - 11.13
1476 - 13.13
1476 - 16.13
1476 - 19.13
1476 - 22.13
1694 - 5.63
1694 - 7.13
1694 - 9.13
1694 - 12.13
1694 - 15.13
1694 - 18.13
1694 - 21.13
1694 - 24.13
1889 - 7.19
1889 - 9.19
1889 - 10.19
1889 - 11.19
1889 - 13.19
1889 - 15.19
1889 - 17.19
1889 - 20.19
1889 - 23.19
1889 - 26.19
POWER TABLE - LIQUID COOLED (TELC)
60
3600
100
6000
42
53
68
76
84
99
114
129
144
49
73
92
116
140
164
183
200
53
64
81
104
127
150
185
220
255
120
152
195
260
325
390
454
518
205
262
290
318
375
432
489
574
659
744
63
80
102
113
124
146
169
192
215
74
110
139
175
211
247
276
302
80
97
122
157
192
227
280
331
385
181
229
294
392
490
588
685
309
395
436
479
565
651
737
865
-
200
300
400
500
600
700
800
900
12000 18000 24000 30000 36000 42000 48000 54000
POWER (HP)
102
130
166
184
202
239
276
313
350
121
180
227
286
345
404
451
131
159
200
257
314
372
459
542
-
Max. speed
(r/min)
Std. rotor: 13000
Spl. rotor: 19000
Std. rotor: 11000
Spl. rotor: 17000
Std. rotor: 10000
Spl. rotor: 15000
Std. rotor: 8750
Spl. rotor: 13000
Std. rotor: 7500
Spl. rotor: 10000
NOTES:
1. FRAME SIZE: (F) dimension represents the stator diameter (BH), in inches having a decimal two places to the left (Ex: F
of 1181 = BH of 11.81). The (BM) dimension represents the stator core-length in inches.
2. POWER: The horsepower values represent the maximum continuous duty power allowable at a given speed using
standard rotor of a given frame with adequate liquid cooling. For application sizing, the frame is selected based on the
power tables above and the windings are designed to meet the individual power requirements of the application. TELC
maximum power ratings are based on winding temeprature rise of 130°C. Consult factory for performance using special
rotor.
3. MAXIMUM SPEED: For standard rotor, this is the maximum allowable speed using die-cast rotor construction and
standard rotor bores. For special rotor, this is the maximum allowable speed using die-cast rotor construction with
encapsulation and standard rotor bores.
Reuland
17969 E. Railroad St. - Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
5
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
2 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
315 - 0.98
315 - 2.17
315 - 3.15
315 - 3.94
354 - 1.77
354 - 2.36
354 - 3.15
354 - 3.94
419 - 1.77
419 - 2.56
419 - 3.15
419 - 3.94
419 - 4.72
472 - 1.50
472 - 2.25
472 - 3.00
472 - 3.75
472 - 4.75
472 - 5.75
472 - 6.75
472 - 7.75
532 - 1.50
532 - 2.00
532 - 2.75
532 - 4.25
532 - 5.75
532 - 7.25
622 - 2.00
622 - 2.75
622 - 3.87
622 - 4.25
622 - 5.75
622 - 7.25
622 - 10.75
782 - 1.69
782 - 2.44
782 - 2.94
782 - 3.94
782 - 5.44
782 - 6.94
782 - 7.94
782 - 8.94
782 - 9.94
782 - 10.94
945 - 2.94
945 - 3.44
945 - 4.69
945 - 5.94
945 - 7.94
945 - 9.94
945 - 11.94
945 - 13.94
1063 - 2.75
1063 - 4.00
1063 - 6.00
1063 - 7.00
1063 - 9.00
1063 - 10.50
1063 - 12.50
1063 - 14.50
1063 - 16.50
POWER TABLE - FAN COOLED (TEFC)
60
3600
100
6000
0.06
0.21
0.4
0.5
0.26
0.43
0.7
1
0.35
0.61
1
1.4
1.7
0.43
0.78
1.2
1.7
2.3
2.8
3.5
4
0.7
1.1
1.6
2.8
4.2
5.4
1.9
2.8
4
4.7
7
8.8
13
2.8
4.3
5.2
7.2
10
13
15
16.5
19
21
8.5
11.5
16
20
26.5
33
40
47
10
15
22.5
26
33
38
46
53
60
0.075
0.26
0.49
0.63
0.31
0.52
0.87
1.2
0.47
0.87
1.3
1.8
2.2
0.61
1
1.5
2.3
3
3.8
4.5
5.3
0.87
1.4
2.3
3.8
5.7
7.3
2.6
3.7
5.3
6.1
8.9
11
16.5
3.5
5.6
7
9.2
12.5
16
18.5
21
23.5
26
9.7
13
17.5
22.5
30
38
45
52
11
16.5
25
29
37
43
51
60
68
200
300
400
500
600
700
800
900
12000 18000 24000 30000 36000 42000 48000 54000
POWER (HP)
0.1
0.12
0.12
0.12
0.11
0.1
0.1
0.1
0.35
0.4
0.42
0.42
0.4
0.39
0.37
0.35
0.66
0.77
0.78
0.78
0.75
0.71
0.68
0.66
0.87
1
1.05
1.05
1
0.95
0.9
0.87
0.43
0.5
0.52
0.52
0.49
0.46
0.43
0.78
0.87
0.87
0.87
0.83
0.78
0.75
1.2
1.3
1.3
1.3
1.2
1.2
1.1
1.5
1.7
1.7
1.7
1.6
1.5
1.4
0.7
0.7
0.7
0.7
0.52
1.2
1.2
1.2
1.2
1.1
1.9
1.9
1.9
1.7
1.5
2.6
2.8
2.8
2.6
2.2
3.3
3.5
3.5
3.1
2.8
0.87
0.87
0.87
0.87
0.7
1.5
1.5
1.5
1.5
1.3
2.3
2.4
2.4
2.3
2.1
3.3
3.5
3.5
3.3
3.1
4.3
4.5
4.5
4.3
4.1
5.6
5.7
5.7
5.4
5.2
6.6
7
7
6.6
6.3
7.7
8
8
7.7
7.4
1.1
1.1
1.1
1.1
1.7
1.7
1.7
1.6
2.6
2.8
2.7
2.5
4.7
4.9
4.7
4.5
7
7.3
7
6.6
8.9
9.3
9
8.5
3
2.8
2.8
4.3
4.2
4
6.1
6
5.8
7.2
7
6.8
10.6
10.3
10
13.5
13
12.5
20
19.5
19
4.2
4.2
6.6
6.6
8.2
8.2
11
11
15
15
19
19
22
22
25
25
28
28
31
31
10.5
9.9
14.5
13
19
18
24.5
22.5
33
30
42
39
50
46
58
53
12.5
18.5
27.5
32
41
48
56
66
76
Reuland
17969 E. Railroad St. - Industry, CA 91749
Phone: (626) 854-7440
Max. speed
(r/min)
Std. rotor: 54000
Std. rotor: 48000
Std. rotor: 36000
Std. rotor: 36000
Std. rotor: 30000
Std. rotor: 25000
Spl. rotor: 40000
Std. rotor: 19000
Spl. rotor: 30000
Std. rotor: 16000
Spl. rotor: 25000
Std. rotor: 14000
Spl. rotor: 21000
www.reuland.com
Email: partialmotorsales@reuland.com
6
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
2 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
1181 - 5.56
1181 - 7.06
1181 - 9.06
1181 - 10.06
1181 - 11.06
1181 - 13.06
1181 - 15.06
1181 - 17.06
1181 - 19.06
1338 - 5.00
1338 - 7.50
1338 - 9.50
1338 - 12.00
1338 - 14.50
1338 - 17.00
1338 - 19.00
1338 - 21.00
1476 - 4.63
1476 - 5.63
1476 - 7.13
1476 - 9.13
1476 - 11.13
1476 - 13.13
1476 - 16.13
1476 - 19.13
1476 - 22.13
1694 - 5.63
1694 - 7.13
1694 - 9.13
1694 - 12.13
1694 - 15.13
1694 - 18.13
1694 - 21.13
1694 - 24.13
1889 - 7.19
1889 - 9.19
1889 - 10.19
1889 - 11.19
1889 - 13.19
1889 - 15.19
1889 - 17.19
1889 - 20.19
1889 - 23.19
1889 - 26.19
POWER TABLE - FAN COOLED (TEFC)
60
3600
100
6000
29
36
46
52
58
68
78
88
98
33
49
62
78
94
110
124
136
36
43
54
69
85
101
124
149
172
56
71
90
120
152
182
211
241
114
147
162
180
210
243
276
324
372
420
32
40
52
58
64
76
86
98
110
37
55
70
88
106
124
138
152
38
46
57
73
90
107
132
158
182
60
76
97
129
161
193
225
257
123
156
174
192
225
261
294
345
396
447
200
300
400
500
600
700
800
900
12000 18000 24000 30000 36000 42000 48000 54000
POWER (HP)
34
44
56
62
68
82
94
106
118
40
59
74
94
114
134
148
162
40
48
61
78
95
113
139
166
193
Max. speed
(r/min)
Std. rotor: 13000
Spl. rotor: 19000
Std. rotor: 11000
Spl. rotor: 17000
Std. rotor: 10000
Spl. rotor: 15000
Std. rotor: 8750
Spl. rotor: 13000
Std. rotor: 7500
Spl. rotor: 10000
NOTES:
1. FRAME SIZE: (F) dimension represents the stator diameter (BH), in inches having a decimal two places to the left (Ex: F
of 1181 = BH of 11.81). The (BM) dimension represents the stator core-length in inches.
2. POWER: The horsepower values represent the maximum continuous duty power allowable at a given speed using
standard rotor of a given frame with adequate air cooling. For application sizing, the frame is selected based on the power
tables above and the windings are designed to meet the individual power requirements of the application. TEFC maximum
power ratings are based on winding temeprature rise of 80°C. Consult factory for performance using special rotor.
3. MAXIMUM SPEED: For standard rotor, this is the maximum allowable speed using die-cast rotor construction and
standard rotor bores. For special rotor, this is the maximum allowable speed using die-cast rotor construction with
encapsulation and standard rotor bores.
Reuland
17969 E. Railroad St. - Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
7
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
2 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
315 - 0.98
315 - 2.17
315 - 3.15
315 - 3.94
354 - 1.77
354 - 2.36
354 - 3.15
354 - 3.94
419 - 1.77
419 - 2.56
419 - 3.15
419 - 3.94
419 - 4.72
472 - 1.50
472 - 2.25
472 - 3.00
472 - 3.75
472 - 4.75
472 - 5.75
472 - 6.75
472 - 7.75
532 - 1.50
532 - 2.00
532 - 2.75
532 - 4.25
532 - 5.75
532 - 7.25
622 - 2.00
622 - 2.75
622 - 3.87
622 - 4.25
622 - 5.75
622 - 7.25
622 - 10.75
782 - 1.69
782 - 2.44
782 - 2.94
782 - 3.94
782 - 5.44
782 - 6.94
782 - 7.94
782 - 8.94
782 - 9.94
782 - 10.94
945 - 2.94
945 - 3.44
945 - 4.69
945 - 5.94
945 - 7.94
945 - 9.94
945 - 11.94
945 - 13.94
1063 - 2.75
1063 - 4.00
1063 - 6.00
1063 - 7.00
1063 - 9.00
1063 - 10.50
1063 - 12.50
1063 - 14.50
1063 - 16.50
POWER TABLE - NON VENTED (TENV)
60
3600
100
6000
0.035
0.12
0.23
0.3
0.15
0.25
0.4
0.55
0.2
0.35
0.55
0.8
1
0.25
0.45
0.7
1
1.3
1.6
2
2.3
0.4
0.6
0.9
1.6
2.4
3.1
1.1
1.6
2.3
2.7
4
5
7.5
1.6
2.5
3.1
4.1
5.7
7.3
8.5
9.5
10.7
12
4.5
6.1
8.3
10.6
14
17.5
21
24.5
5
7.4
11
13
16.5
19
23
26.5
30
0.043
0.15
0.28
0.36
0.18
0.3
0.5
0.65
0.27
0.5
0.75
1.1
1.3
0.35
0.6
0.9
1.3
1.7
2.2
2.6
3
0.5
0.8
1.3
2.2
3.3
4.2
1.5
2.1
3
3.5
5.1
6.5
9.6
2
3.2
4
5.3
7.4
9.3
10.5
12
13.5
15
5.1
6.8
9.3
12
16
20
24
28
5.6
8.3
12.5
14.5
18.5
21.5
25.5
30
34
200
300
400
500
600
700
800
900
12000 18000 24000 30000 36000 42000 48000 54000
POWER (HP)
0.06
0.067
0.07
0.07
0.065 0.062
0.06
0.058
0.2
0.23
0.24
0.24
0.23
0.22
0.21
0.2
0.38
0.44
0.45
0.45
0.43
0.41
0.39
0.38
0.5
0.57
0.6
0.6
0.58
0.55
0.52
0.5
0.25
0.29
0.3
0.3
0.29
0.27
0.25
0.45
0.5
0.5
0.5
0.48
0.45
0.41
0.68
0.77
0.77
0.77
0.73
0.67
0.6
0.9
1
1
1
0.95
0.87
0.8
0.4
0.4
0.4
0.4
0.3
0.7
0.7
0.7
0.7
0.6
1.1
1.1
1.1
1
0.9
1.5
1.6
1.6
1.5
1.3
1.9
2
2
1.8
1.6
0.5
0.5
0.5
0.5
0.4
0.9
0.9
0.9
0.9
0.8
1.3
1.4
1.4
1.3
1.2
1.9
2
2
1.9
1.8
2.5
2.6
2.6
2.5
2.4
3.2
3.3
3.3
3.1
3
3.8
4
4
3.8
3.6
4.4
4.6
4.6
4.4
4.2
0.6
0.6
0.58
0.55
1
1
0.95
0.9
1.5
1.6
1.5
1.4
2.7
2.8
2.7
2.6
4
4.2
4
3.8
5.1
5.3
5.1
4.9
1.7
1.6
1.5
2.5
2.4
2.3
3.5
3.4
3.3
4.1
4
3.9
6.1
5.9
5.7
7.7
7.5
7.3
11.6
11.3
11
2.4
2.4
3.8
3.8
4.7
4.7
6.3
6.3
8.8
8.8
11
11
13
13
14.5
14.5
16
16
18
18
5.6
5.2
7.6
7
10.2
9.5
13
12
17.5
16
22
20
26.5
24.5
31
29
6.2
9.2
14
16
20.5
24
28
33
38
Reuland
17969 E. Railroad St. - Industry, CA 91749
Phone: (626) 854-7440
Max. speed
(r/min)
Std. rotor: 54000
Std. rotor: 48000
Std. rotor: 36000
Std. rotor: 36000
Std. rotor: 30000
Std. rotor: 25000
Spl. rotor: 40000
Std. rotor: 19000
Spl. rotor: 30000
Std. rotor: 16000
Spl. rotor: 25000
Std. rotor: 14000
Spl. rotor: 21000
www.reuland.com
Email: partialmotorsales@reuland.com
8
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
2 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
1181 - 5.56
1181 - 7.06
1181 - 9.06
1181 - 10.06
1181 - 11.06
1181 - 13.06
1181 - 15.06
1181 - 17.06
1181 - 19.06
1338 - 5.00
1338 - 7.50
1338 - 9.50
1338 - 12.00
1338 - 14.50
1338 - 17.00
1338 - 19.00
1338 - 21.00
1476 - 4.63
1476 - 5.63
1476 - 7.13
1476 - 9.13
1476 - 11.13
1476 - 13.13
1476 - 16.13
1476 - 19.13
1476 - 22.13
1694 - 5.63
1694 - 7.13
1694 - 9.13
1694 - 12.13
1694 - 15.13
1694 - 18.13
1694 - 21.13
1694 - 24.13
1889 - 7.19
1889 - 9.19
1889 - 10.19
1889 - 11.19
1889 - 13.19
1889 - 15.19
1889 - 17.19
1889 - 20.19
1889 - 23.19
1889 - 26.19
POWER TABLE - NON VENTED (TENV)
60
3600
100
6000
14
18
23
26
29
34
39
44
49
16.5
24.5
31
39
47
55
62
68
17
20.5
26
33
40
48
59
71
82
24.5
31
39
52
66
79
92
105
38
49
54
60
70
81
92
108
124
140
16
20
26
29
32
38
43
49
55
18.5
27.5
35
44
53
62
69
76
18
22
27
35
43
51
63
75
87
26
33
42
56
70
84
98
112
41
52
58
64
75
87
98
115
132
149
200
300
400
500
600
700
800
900
12000 18000 24000 30000 36000 42000 48000 54000
POWER (HP)
17
22
28
31
34
41
47
53
59
20
29.5
37
47
57
67
74
81
19
23
29
37
45
54
66
79
92
Max. speed
(r/min)
Std. rotor: 13000
Spl. rotor: 19000
Std. rotor: 11000
Spl. rotor: 17000
Std. rotor: 10000
Spl. rotor: 15000
Std. rotor: 8750
Spl. rotor: 13000
Std. rotor: 7500
Spl. rotor: 10000
NOTES:
1. FRAME SIZE: (F) dimension represents the stator diameter (BH), in inches having a decimal two places to the left (Ex: F
of 1181 = BH of 11.81). The (BM) dimension represents the stator core-length in inches.
2. POWER: The horsepower values represent the maximum continuous duty power allowable at a given speed using
standard rotor of a given frame. For application sizing, the frame is selected based on the power tables above and the
windings are designed to meet the individual power requirements of the application. TENV maximum power ratings are
based on winding temeprature rise of 80°C. Consult factory for performance using special rotor.
3. MAXIMUM SPEED: For standard rotor, this is the maximum allowable speed using die-cast rotor construction and
standard rotor bores. For special rotor, this is the maximum allowable speed using die-cast rotor construction with
encapsulation and standard rotor bores.
Reuland
17969 E. Railroad St. - Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
9
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
2 POLE PRODUCT CODE
ENCLOSURE
SHELL
FRAME
SIZE
(F)
CORE
LENGTH
(BM)
_
S - FOR
THE
STANDARD
SHELL
(SEE
STATOR
TABLE )
C - FOR A
CUSTOM
SHELL
LLIQUID
COOLED
(TELC)
F - FAN
COOLED
(TEFC)
FRAME
SIZE (F)
SEE
POWER
TABLES
ROTOR
ID BORE
(CA)
# OF
POLES
_
2
SENSOR
CODE
_
( A ) FOR
BLANKED
Ø(A)
SEE
POWER
TABLES
( B ) FOR
BLANKED
Ø(B)
X - NO
SHELL/
BLANKED
STATOR
OD
ROTOR
FIN
CODE
_
CORE
LENGTH
(BM)
N - NON
VENTED
(TENV)
ROTOR OD
(DB)
( C ) FOR
CUSTOM
MACHINED
Ø
SEE
ROTOR
TABLE
( P ) FOR
PUNCHED
DIAMETER
(SEE
STAMPED
STATOR ID
ON STATOR
TABLE)
ROTOR
FINS
REQUIRED
Y - YES
N - NO
ENTER
VALUE
FROM
ROW 1
OF
SENSOR
TABLE
( M ) FOR
STANDARD
MACHINED
DIAMETER
(SEE ROTOR
TABLE)
( C ) FOR
CUSTOM
MACHINED
DIAMETER
M - NO
SHELL/
MACHINED
STATOR
LEGEND
1. SHELL: Determine if a shell is required for the application. If a custom shell is required
consult factory for availability.
2. ENCLOSURE: Type of cooling (TELC, TEFC & TENV).
3. FRAME SIZE (F): See power tables & dimension tables for required frame.
4. CORE LENGTH (BM): See power tables for required core length. Custom lengths
available, consult factory.
5. ROTOR ID BORE (CA): See dimension tables for available blanked diameters. Consult
factory for custom rotor ID’s.
6. ROTOR OD (DB): See dimension tables for blanked diameters, standard machined
diameters or consult factory for custom machined diameters.
7. ROTOR FIN CODE: Are rotor fins required?
8. SENSOR CODE: See sensor code table for configurations. Consult factory for other
options.
Reuland
17969 E. Railroad St. – Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
10
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
2 POLE DATA
STATOR
LEAD
SIDE
FRAME
SIZE
STAMPED
STATOR
ID
( SHELL )
( SHELL )
BH
BHS
BMS
W¹
(max)
W²
(max)
BL
(max)
315
354
419
472
532
622
782
945
1063
1181
1338
1476
1694
1889
1.574
1.772
2.560
2.441
2.756
3.347
4.331
5.315
5.905
6.500
7.480
8.465
9.448
11.417
3.149
3.543
4.192
4.723
5.314
6.222
7.814
9.447
10.629
11.810
13.386
14.763
16.949
18.897
3.500
4.000
4.500
4.703
5.703
6.468
8.000
10.000
11.000
12.375
14.000
15.000
17.500
19.500
BM + 0.5
BM + 0.5
BM + 0.5
BM + 0.47
BM + 0.47
BM + 0.47
BM + 1.19
BM + 1.19
BM + 1.06
BM + 1.06
BM + 3
BM + 3.37
BM + 3.37
BM + 3.31
.78
.85
1.00
1.15
1.25
1.35
1.50
2.00
2.25
2.50
3.00
3.25
3.50
4.50
.95
1.00
1.25
1.40
1.50
1.70
2.00
2.25
2.50
2.75
3.25
3.50
4.00
5.00
2.9
3.3
3.8
4.5
5.2
6
7.5
9.2
10.1
11.5
12.5
13.8
16.5
18.5
ROTOR
FRAME
SIZE
DB
(mach.)
BO
(mach.)
(without fins)
BR
H
CA
(blanked Ø)
(with fins)
BR
H
H¹
A
B
CA
(mach.)
(max)
1.554
BM
0.687
315
1.752
BM
0.75
354
2.536
BM + 0.25
1.660
.315
.710
.748
1.5
419
2.411
BM + 0.25
1.378
.400
1.378
.400
.750
.984
*1.4
472
2.726
BM + 0.25
1.650
.600
1.789
.750
1.050
.990
1.57
532
3.317
BM + 0.25
2.000
.531
2.000
.531
1.000
.990
1.490
*2.3
622
4.291
BM + 0.25
2.500
.550
2.500
.625
1.250
1.490
1.990
*2.7
782
5.275
BM + 0.25
3.090
.750
3.090
.750
1.500
1.740
2.165
*3.2
945
5.855
BM + 0.25
3.750
.875
3.750
.875
1.875
1.990
2.559
3.6
1063
6.44
BM + 0.25
3.500
.950
2.490
2.952
*3.9
1181
7.41
BM + 0.25
4.200
.781
3.380
.781
2.500
2.740
3.149
4.1
1338
8.385
BM + 0.25
4.800
1.000
4.800
1.000
1.700
2.740
3.346
4.5
1476
9.358
BM + 0.25
5.850
1.350
3.937
4.331
5.5
1654
1889
11.307
BM + 0.25
6.572
1.590
4.331
4.724
6.3
* requires use of a non standard end ring with large “BR” or machining of “BR” dimension to achieve max. “CA” dimension.
Reuland
17969 E. Railroad St. – Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
11
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
TOLERANCE
SENSORS
VALUE
OPTION
1
( 1 ) 150°C N.C. THERMAL SWITCH
2
( 3 ) 150°C N.C. THERMAL SWITCH, 1 PER PHASE
3
( 1 ) 100 ohm PLATINUM RTD
4
( 1 ) type "J" THERMOCOUPLE
5
( 1 ) type "K" THERMOCOUPLE
6
( 1 ) type "T" THERMOCOUPLE
7
( 1 ) PTC THERMISTOR
8
( 1 ) NTC THERMISTOR
Z
OTHER
w/shell
±.250
0.000/-0.002
0.000/-0.030
±.030
±.200
0.000/-0.001
±.025
±.200
±.001
BJ
BH
BHS
BM
BMS
BO
BL
CA
BR
BP
DB*
w/out shell
±.250
+0.003/-0.002
±.060
±.030
±.200
0.000/-0.001
±.025
±.200
±.001
* "DB" Customer to finish turn rotor to
specified diameter and balance.
Reuland may finish-turn upon request.
NOTES
1. Straight bore without keyway is standard.
2. Maximum bore shown is for standard die cast rotors without keyway; with keyway,
reduce by keyway depth. Larger bores may be available using die cast rotors with non
standard laminations and/or fabricated rotor construction. (Consult factory.)
3. Blanked bore is as die punched.
4. Speeds higher than the base 60 Hz rating may limit the maximum bore.
5. Standard lead length is 3 feet.
Reuland
17969 E. Railroad St. – Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
12
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
4 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
315 - 0.98
315 - 2.17
315 - 3.15
315 - 3.94
354 - 1.77
354 - 2.36
354 - 3.15
354 - 3.94
419 - 1.77
419 - 2.56
419 - 3.15
419 - 3.94
419 - 4.72
472 - 1.50
472 - 2.25
472 - 3.00
472 - 3.75
472 - 4.75
472 - 5.75
472 - 6.75
472 - 7.75
532 - 1.50
532 - 2.00
532 - 2.75
532 - 4.25
532 - 5.75
532 - 7.25
622 - 2.00
622 - 2.75
622 - 3.87
622 - 4.25
622 - 5.75
622 - 7.25
622 - 10.75
782 - 1.69
782 - 2.44
782 - 2.94
782 - 3.94
782 - 5.44
782 - 6.94
782 - 7.94
782 - 8.94
782 - 9.94
782 - 10.94
945 - 2.94
945 - 3.44
945 - 4.69
945 - 5.94
945 - 7.94
945 - 9.94
945 - 11.94
945 - 13.94
1063 - 2.75
1063 - 4.00
1063 - 6.00
1063 - 7.00
1063 - 9.00
1063 - 10.50
1063 - 12.50
1063 - 14.50
1063 - 16.50
POWER TABLE - LIQUID COOLED (TELC)
60
1800
100
3000
200
6000
300
9000
0.09
0.32
0.55
0.75
0.3
0.5
0.75
1
0.6
1
1.3
1.7
2.1
0.65
1.2
1.7
2.3
3.1
3.8
4.5
5.2
1.1
1.7
2.5
4.1
5.9
7.5
2.6
3.9
5.8
6.7
9.4
12
18
3.4
5.4
7
10
15
20
23
26
29
32
13
16
23
30
41
52
62
72
14
23
36
44
57
67
80
94
108
0.23
0.7
1.1
1.5
0.8
1.2
1.6
2.1
1.5
2.3
2.9
3.7
4.5
1.5
2.6
3.5
4.4
6
7.3
8.6
9.9
2.4
3.7
5.1
7.9
10.7
13.5
5.4
8
11.5
13
18
23
34
7
11
14
19
28
36
42
48
54
60
25
29
40
51
69
87
104
121
28
42
63
74
96
112
134
157
180
0.65
1.7
2.6
3.4
1.7
2.5
3.5
4.5
3.2
4.7
5.9
7.4
9
3.6
5.6
7.5
9.4
12
14.5
17
20
5.3
7.3
10
15.5
21.5
27.5
12
17
24
26.5
36
46
68
17
25
31
42
59
76
87
98
109
120
48
57
78
99
133
168
202
235
47
70
105
123
160
186
223
261
300
1
2.6
3.9
5.1
2.6
3.8
5.3
6.8
4.8
7
8.8
11
13.5
5.5
8.4
11.5
14
18
22
25.5
30
8
10.8
15
23
32
41
18
25.5
36
40
54
69
102
27
39
47
63
87
112
129
146
163
180
51
61
83
106
142
180
215
250
47
70
105
123
160
186
223
261
300
Reuland
17969 E. Railroad St. - Industry, CA 91749
400
500
600
700
800
900
12000 15000 18000 21000 24000 27000
POWER (HP)
1.4
1.8
2.2
2.6
3
3.4
3.4
4.2
5
5.8
6.6
7.4
5.2
6.5
7.8
9
10.2
11.5
6.8
8.5
10
11.5
13
14.5
3.5
4.4
5.3
6.2
7.1
8
5.2
6.5
7.8
9.1
10.4
11.5
7.1
8.9
10.7
12.5
14.5
16
9.1
11.5
14
16
18
20
6.4
7.6
8.7
9.5
10
10.5
9.3
11
12.5
13.5
14.5
15.5
11.5
14
16
17.5
19
20
14.5
17.5
20.5
22.5
24
25
18
22
25.5
28
30
31
7.3
8.8
10
11
12
12.5
11
13
15
17
18
19
15
18
20.5
22.5
24.5
26
18.5
22.5
25.5
28
30
32
24
29
33
36
38
40
29.5
35
40
43
46
48
34
41
47
51
54
57
40
47
54
59
63
66
10.6
12.5
14.5
16
17
18
14.5
17.5
20
22
24
25
20
24
27.5
31
33
35
31
37
42
47
50
53
43
52
59
65
69
73
55
66
75
83
88
93
24.5
29
29
29
34
41
41
41
49
58
58
58
54
64
64
64
73
87
87
87
92
110
110
110
136
164
164
164
30
30
43
43
52
52
70
70
97
97
125
125
143
143
162
162
181
181
200
200
51
61
83
106
142
180
215
250
47
70
105
123
160
186
223
261
300
Phone: (626) 854-7440
Max. speed
(r/min)
Std. rotor: 48000
Std. rotor: 42000
Std. rotor: 36000
Std. rotor: 30000
Std. rotor: 28000
Std. rotor: 23000
Spl. rotor: 33000
Std. rotor: 17000
Spl. rotor: 25000
Std. rotor: 14000
Spl. rotor: 21000
Std. rotor: 12500
Spl. rotor: 19000
www.reuland.com
Email: partialmotorsales@reuland.com
13
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
4 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
1181 - 5.56
1181 - 7.06
1181 - 9.06
1181 - 10.06
1181 - 11.06
1181 - 13.06
1181 - 15.06
1181 - 17.06
1181 - 19.06
1338 - 5.00
1338 - 7.50
1338 - 9.50
1338 - 12.00
1338 - 14.50
1338 - 17.00
1338 - 19.00
1338 - 21.00
1476 - 4.63
1476 - 5.63
1476 - 7.13
1476 - 9.13
1476 - 11.13
1476 - 13.13
1476 - 16.13
1476 - 19.13
1476 - 22.13
1694 - 5.63
1694 - 7.13
1694 - 9.13
1694 - 12.13
1694 - 15.13
1694 - 18.13
1694 - 21.13
1694 - 24.13
1889 - 7.19
1889 - 9.19
1889 - 10.19
1889 - 11.19
1889 - 13.19
1889 - 15.19
1889 - 17.19
1889 - 20.19
1889 - 23.19
1889 - 26.19
POWER TABLE - LIQUID COOLED (TELC)
60
1800
100
3000
200
6000
300
9000
49
63
81
90
99
117
136
155
174
57
86
110
139
168
198
222
246
64
78
99
128
157
186
229
272
315
105
133
171
228
285
342
399
456
195
250
278
306
361
416
471
554
637
720
82
105
135
150
166
197
228
259
290
96
145
184
233
282
331
370
410
107
131
167
214
262
310
381
453
525
176
223
286
381
475
570
665
760
297
382
424
466
550
635
719
846
972
1100
99
126
163
181
200
238
275
313
350
106
160
202
256
310
364
406
450
112
137
175
225
275
325
400
475
550
176
223
286
381
475
570
665
760
297
382
424
466
550
635
719
846
972
-
99
126
163
181
200
238
275
313
350
106
160
202
256
310
364
406
450
112
137
175
225
275
325
400
475
550
400
500
600
700
800
900
12000 15000 18000 21000 24000 27000
POWER (HP)
Max. speed
(r/min)
Std. rotor: 11000
Spl. rotor: 17000
Std. rotor: 10000
Spl. rotor: 15000
Std. rotor: 9000
Spl. rotor: 13000
Std. rotor: 8000
Spl. rotor: 11000
Std. rotor: 6500
Spl. rotor: 9000
NOTES:
1. FRAME SIZE: (F) dimension represents the stator diameter (BH), in inches having a decimal two places to the left (Ex: F
of 1181 = BH of 11.81). The (BM) dimension represents the stator core-length in inches.
2. POWER: The horsepower values represent the maximum continuous duty power allowable at a given speed using
standard rotor of a given frame with adequate liquid cooling. For application sizing, the frame is selected based on the
power tables above and the windings are designed to meet the individual power requirements of the application. TELC
maximum power ratings are based on winding temeprature rise of 130°C. Consult factory for performance using special
rotor.
3. MAXIMUM SPEED: For standard rotor, this is the maximum allowable speed using die-cast rotor construction and
standard rotor bores. For special rotor, this is the maximum allowable speed using die-cast rotor construction with
encapsulation and standard rotor bores.
Reuland
17969 E. Railroad St. - Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
14
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
4 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
315 - 0.98
315 - 2.17
315 - 3.15
315 - 3.94
354 - 1.77
354 - 2.36
354 - 3.15
354 - 3.94
419 - 1.77
419 - 2.56
419 - 3.15
419 - 3.94
419 - 4.72
472 - 1.50
472 - 2.25
472 - 3.00
472 - 3.75
472 - 4.75
472 - 5.75
472 - 6.75
472 - 7.75
532 - 1.50
532 - 2.00
532 - 2.75
532 - 4.25
532 - 5.75
532 - 7.25
622 - 2.00
622 - 2.75
622 - 3.87
622 - 4.25
622 - 5.75
622 - 7.25
622 - 10.75
782 - 1.69
782 - 2.44
782 - 2.94
782 - 3.94
782 - 5.44
782 - 6.94
782 - 7.94
782 - 8.94
782 - 9.94
782 - 10.94
945 - 2.94
945 - 3.44
945 - 4.69
945 - 5.94
945 - 7.94
945 - 9.94
945 - 11.94
945 - 13.94
1063 - 2.75
1063 - 4.00
1063 - 6.00
1063 - 7.00
1063 - 9.00
1063 - 10.50
1063 - 12.50
1063 - 14.50
1063 - 16.50
POWER TABLE - FAN COOLED (TEFC)
60
1800
100
3000
200
6000
300
9000
0.045
0.16
0.3
0.4
0.17
0.28
0.47
0.65
0.33
0.57
0.84
1.1
1.5
0.35
0.63
0.87
1.2
1.5
1.9
2.4
2.8
0.82
1.1
1.5
2.6
4
5
1.7
2.6
3.8
4.5
6.4
8.2
12
2.1
3.1
4.3
6.3
9.6
13
15
17
19
21
8.2
10.5
15
19
25.5
32
40
47
8.2
13.5
21
25
34
39
48
56
64
0.061
0.22
0.42
0.57
0.24
0.45
0.75
1
0.5
0.85
1.2
1.6
2.1
0.5
0.82
1.1
1.5
2.2
2.9
3.5
4
1
1.5
2.2
3.4
5
6.6
2.2
3.6
5.4
6.3
8.9
11
16
2.6
4.3
5.2
7.8
12
16
18.5
21
23.5
26
9.7
12
17
22.5
30
39
47
55
10.2
17
26
32
42
49
60
70
80
0.09
0.33
0.63
0.84
0.35
0.7
1.05
1.4
0.6
1.05
1.7
2.4
3.1
0.7
1.2
1.7
2.4
3.3
4.2
5
6
1.05
1.7
2.6
4.2
6.3
8.2
2.6
4.2
6.3
7.3
10.5
13
20
3.3
5.4
7
10
15
20
23.5
26
29
32
11
14
20
26
35
45
55
64
11
18.5
28
34
46
53
64
75
86
0.11
0.39
0.73
1
0.45
0.8
1.2
1.6
0.7
1.2
1.9
2.8
3.5
0.87
1.5
2.1
3.1
4.2
5.6
6.5
7.7
1.05
1.7
2.8
4.7
7.3
9.2
2.9
4.5
6.8
7.8
11
14
22
3.6
6.1
7.7
11
17
23
26
29
32.5
36
10.5
13
19
24
32
42
51
60
10.6
17.5
27
32
43
51
62
72
82
Reuland
17969 E. Railroad St. - Industry, CA 91749
400
500
600
700
800
900
12000 15000 18000 21000 24000 27000
POWER (HP)
0.12
0.12
0.12
0.12
0.11
0.11
0.42
0.42
0.42
0.4
0.39
0.38
0.78
0.78
0.78
0.77
0.76
0.75
1.05
1.05
1.05
1.03
1.02
1.01
0.52
0.52
0.52
0.49
0.45
0.42
0.87
0.87
0.87
0.83
0.78
0.75
1.3
1.3
1.3
1.2
1.1
1.1
1.7
1.7
1.7
1.6
1.5
1.5
0.7
0.7
0.66
0.63
0.6
0.56
1.2
1.2
1.1
1.05
0.98
0.95
1.9
1.9
1.8
1.7
1.6
1.5
2.8
2.8
2.6
2.4
2.3
2.2
3.5
3.5
3.3
3.1
2.9
2.8
0.87
0.77
0.66
0.6
0.54
0.5
1.5
1.4
1.2
1.1
1
0.87
2.1
1.8
1.6
1.4
1.3
1.2
3.1
2.7
2.4
2.1
1.9
1.7
4.2
3.7
3.2
2.9
2.6
2.2
5.6
4.9
4.2
3.8
3.4
3
6.5
5.7
5
4.5
4
3.6
7.7
6.9
6.1
5.4
4.9
4.3
1.05
0.98
0.92
0.85
0.8
0.75
1.7
1.5
1.5
1.4
1.3
1.2
2.8
2.6
2.4
2.2
2.1
1.9
4.7
4.4
4.2
3.8
3.5
3.3
7.3
6.8
6.4
6
5.6
5.2
9.2
8.7
8.2
7.7
7.1
6.6
2.9
2.8
2.6
2.2
4.7
4.3
4
3.6
7
6.4
5.9
5.4
8.2
7.5
7
6.3
11.5
10.8
9.8
8.9
14.5
13.5
12.5
11
22.5
21
19.5
17.5
3.3
3.1
5.6
5.2
7.2
6.4
10.5
9.6
15.5
14.5
21
19
24
22
27
25
30.5
28
34
31
9.7
12
17
22.5
30
39
47
55
10
16.5
26
31
42
48
58
68
78
Phone: (626) 854-7440
Max. speed
(r/min)
Std. rotor: 48000
Std. rotor: 42000
Std. rotor: 36000
Std. rotor: 30000
Std. rotor: 28000
Std. rotor: 23000
Spl. rotor: 33000
Std. rotor: 17000
Spl. rotor: 25000
Std. rotor: 14000
Spl. rotor: 21000
Std. rotor: 12500
Spl. rotor: 19000
www.reuland.com
Email: partialmotorsales@reuland.com
15
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
4 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
1181 - 5.56
1181 - 7.06
1181 - 9.06
1181 - 10.06
1181 - 11.06
1181 - 13.06
1181 - 15.06
1181 - 17.06
1181 - 19.06
1338 - 5.00
1338 - 7.50
1338 - 9.50
1338 - 12.00
1338 - 14.50
1338 - 17.00
1338 - 19.00
1338 - 21.00
1476 - 4.63
1476 - 5.63
1476 - 7.13
1476 - 9.13
1476 - 11.13
1476 - 13.13
1476 - 16.13
1476 - 19.13
1476 - 22.13
1694 - 5.63
1694 - 7.13
1694 - 9.13
1694 - 12.13
1694 - 15.13
1694 - 18.13
1694 - 21.13
1694 - 24.13
1889 - 7.19
1889 - 9.19
1889 - 10.19
1889 - 11.19
1889 - 13.19
1889 - 15.19
1889 - 17.19
1889 - 20.19
1889 - 23.19
1889 - 26.19
POWER TABLE - FAN COOLED (TEFC)
60
1800
100
3000
200
6000
300
9000
28
35
44
51
56
66
76
88
98
32
47
60
76
92
110
124
138
36
44
56
71
88
105
128
153
176
64
81
102
136
172
207
241
276
123
159
177
195
228
264
300
354
405
459
34
43
54
62
68
80
94
106
120
38
58
74
94
114
134
152
168
41
50
63
82
101
120
147
174
202
74
92
117
156
196
235
276
315
147
191
213
237
276
321
363
426
492
555
38
48
62
70
76
90
104
120
134
42
64
82
104
126
150
170
188
46
57
71
90
111
132
164
195
225
78
99
125
166
210
253
294
338
168
216
240
267
312
363
411
486
558
630
36
45
58
64
72
84
98
112
126
40
60
78
98
120
140
160
178
43
52
67
86
105
126
153
184
212
400
500
600
700
800
900
12000 15000 18000 21000 24000 27000
POWER (HP)
Max. speed
(r/min)
Std. rotor: 11000
Spl. rotor: 17000
Std. rotor: 10000
Spl. rotor: 15000
Std. rotor: 9000
Spl. rotor: 13000
Std. rotor: 8000
Spl. rotor: 11000
Std. rotor: 6500
Spl. rotor: 9000
NOTES:
1. FRAME SIZE: (F) dimension represents the stator diameter (BH), in inches having a decimal two places to the left (Ex: F
of 1181 = BH of 11.81). The (BM) dimension represents the stator core-length in inches.
2. POWER: The horsepower values represent the maximum continuous duty power allowable at a given speed using
standard rotor of a given frame with adequate air cooling. For application sizing, the frame is selected based on the power
tables above and the windings are designed to meet the individual power requirements of the application. TEFC maximum
power ratings are based on winding temeprature rise of 80°C. Consult factory for performance using special rotor.
3. MAXIMUM SPEED: For standard rotor, this is the maximum allowable speed using die-cast rotor construction and
standard rotor bores. For special rotor, this is the maximum allowable speed using die-cast rotor construction with
encapsulation and standard rotor bores.
Reuland
17969 E. Railroad St. - Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
16
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
4 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
315 - 0.98
315 - 2.17
315 - 3.15
315 - 3.94
354 - 1.77
354 - 2.36
354 - 3.15
354 - 3.94
419 - 1.77
419 - 2.56
419 - 3.15
419 - 3.94
419 - 4.72
472 - 1.50
472 - 2.25
472 - 3.00
472 - 3.75
472 - 4.75
472 - 5.75
472 - 6.75
472 - 7.75
532 - 1.50
532 - 2.00
532 - 2.75
532 - 4.25
532 - 5.75
532 - 7.25
622 - 2.00
622 - 2.75
622 - 3.87
622 - 4.25
622 - 5.75
622 - 7.25
622 - 10.75
782 - 1.69
782 - 2.44
782 - 2.94
782 - 3.94
782 - 5.44
782 - 6.94
782 - 7.94
782 - 8.94
782 - 9.94
782 - 10.94
945 - 2.94
945 - 3.44
945 - 4.69
945 - 5.94
945 - 7.94
945 - 9.94
945 - 11.94
945 - 13.94
1063 - 2.75
1063 - 4.00
1063 - 6.00
1063 - 7.00
1063 - 9.00
1063 - 10.50
1063 - 12.50
1063 - 14.50
1063 - 16.50
POWER TABLE - NON VENTED (TENV)
60
1800
100
3000
200
6000
300
9000
0.027
0.096
0.17
0.23
0.1
0.17
0.27
0.38
0.19
0.33
0.48
0.67
0.86
0.2
0.36
0.5
0.7
0.9
1.1
1.3
1.5
0.47
0.68
0.9
1.5
2.3
2.9
1
1.5
2.2
2.6
3.7
4.7
7
1.2
2
2.5
3.6
5.5
7.4
8.5
9.6
10.8
12
4.3
5.4
7.8
10.2
13.5
17
20
23.5
4.1
6.8
10.7
13
17
20
24
28
32
0.035
0.13
0.24
0.33
0.14
0.26
0.4
0.57
0.3
0.53
0.7
1
1.2
0.29
0.47
0.67
0.9
1.3
1.7
2
2.3
0.58
0.9
1.3
2
2.9
3.8
1.3
2.1
3.1
3.6
5.1
6.4
9.6
1.5
2.5
3
4.5
6.9
9.2
10.6
12
13.5
15
5.1
6.3
9.1
12
16
20.5
25
29
5.1
8.5
13.5
16
21
24.5
30
35
40
0.052
0.19
0.36
0.48
0.21
0.39
0.6
0.8
0.35
0.6
1
1.4
1.8
0.38
0.67
1
1.4
1.9
2.4
2.9
3.5
0.6
1
1.5
2.4
3.6
4.7
1.5
2.4
3.6
4.2
6
7.5
11.5
1.9
3.1
4
5.7
8.7
11.5
13.5
15
17
19
5.9
7.3
10.5
13.5
18.5
23.5
28.5
33
5.5
9.2
15
18
23
26.5
32
37.5
43
0.061
0.22
0.42
0.54
0.26
0.45
0.7
0.93
0.4
0.7
1.1
1.6
2
0.5
0.9
1.2
1.8
2.4
3.2
3.7
4.4
0.6
1
1.6
2.7
4.2
5.3
1.7
2.6
3.9
4.5
6.4
8.1
12.5
2.1
3.5
4.4
6.4
9.6
12.5
14.5
16.5
18.5
21
5.5
6.8
9.9
13
17.5
22
26.5
31
5.3
8.8
14.5
17
22
25.5
31
36
41
Reuland
17969 E. Railroad St. - Industry, CA 91749
400
500
600
700
800
900
12000 15000 18000 21000 24000 27000
POWER (HP)
0.07
0.07
0.07
0.068 0.063 0.063
0.24
0.24
0.24
0.23
0.22
0.22
0.45
0.45
0.45
0.44
0.43
0.43
0.6
0.6
0.6
0.59
0.58
0.58
0.3
0.3
0.3
0.28
0.26
0.24
0.5
0.5
0.5
0.48
0.45
0.43
0.77
0.77
0.77
0.74
0.7
0.68
1
1
1
0.97
0.93
0.89
0.4
0.4
0.38
0.36
0.34
0.32
0.7
0.7
0.67
0.62
0.58
0.56
1.1
1.1
1
0.95
0.89
0.85
1.6
1.6
1.5
1.4
1.3
1.2
2
2
1.9
1.8
1.7
1.6
0.5
0.44
0.38
0.35
0.31
0.28
0.9
0.8
0.69
0.61
0.53
0.47
1.2
1.1
0.97
0.85
0.75
0.65
1.8
1.6
1.4
1.2
1.1
1
2.4
2.1
1.9
1.7
1.5
1.3
3.2
2.8
2.5
2.2
2
1.8
3.7
3.3
2.9
2.6
2.3
2.1
4.4
3.9
3.5
3.1
2.8
2.5
0.6
0.56
0.53
0.49
0.46
0.43
1
0.9
0.88
0.83
0.77
0.71
1.6
1.5
1.4
1.3
1.2
1.1
2.7
2.5
2.4
2.2
2
1.9
4.2
3.9
3.7
3.4
3.2
3
5.3
5
4.7
4.4
4.1
3.8
1.7
1.6
1.5
1.3
2.7
2.5
2.3
2.1
4
3.7
3.4
3.1
4.7
4.3
4
3.6
6.7
6.2
5.6
5.1
8.4
7.8
7.1
6.4
13
12
11
10
1.9
1.7
3.2
2.8
4.1
3.7
5.9
5.5
8.9
8.3
12
11
13.5
12.5
15.5
14.5
17.5
16
19.5
18
5.1
6.3
9.1
12
16
20.5
25
29
5
8.3
14
16.5
21
24
29
34
39
Phone: (626) 854-7440
Max. speed
(r/min)
Std. rotor: 48000
Std. rotor: 42000
Std. rotor: 36000
Std. rotor: 30000
Std. rotor: 28000
Std. rotor: 23000
Spl. rotor: 33000
Std. rotor: 17000
Spl. rotor: 25000
Std. rotor: 14000
Spl. rotor: 21000
Std. rotor: 12500
Spl. rotor: 19000
www.reuland.com
Email: partialmotorsales@reuland.com
17
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
4 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
1181 - 5.56
1181 - 7.06
1181 - 9.06
1181 - 10.06
1181 - 11.06
1181 - 13.06
1181 - 15.06
1181 - 17.06
1181 - 19.06
1338 - 5.00
1338 - 7.50
1338 - 9.50
1338 - 12.00
1338 - 14.50
1338 - 17.00
1338 - 19.00
1338 - 21.00
1476 - 4.63
1476 - 5.63
1476 - 7.13
1476 - 9.13
1476 - 11.13
1476 - 13.13
1476 - 16.13
1476 - 19.13
1476 - 22.13
1694 - 5.63
1694 - 7.13
1694 - 9.13
1694 - 12.13
1694 - 15.13
1694 - 18.13
1694 - 21.13
1694 - 24.13
1889 - 7.19
1889 - 9.19
1889 - 10.19
1889 - 11.19
1889 - 13.19
1889 - 15.19
1889 - 17.19
1889 - 20.19
1889 - 23.19
1889 - 26.19
POWER TABLE - NON VENTED (TENV)
60
1800
100
3000
200
6000
300
9000
14
17.5
22.5
25
28
33
38
44
50
15.5
23.5
30
38
46
55
62
69
17.5
21
26.5
34
42
50
61
73
84
28
35
44
59
75
90
105
120
41
53
59
65
76
88
100
118
135
153
17
21.5
28
31
34
40
47
53
60
19
29
37
47
57
67
76
84
20
24
30
39
48
57
70
83
96
32
40
51
68
86
103
120
137
49
64
71
79
92
107
121
142
164
185
19
24
31
35
38
45
52
60
67
21
32
41
52
63
75
85
94
22
27
34
43
53
63
78
93
107
34
43
54
72
91
110
128
147
56
72
80
89
104
121
137
162
186
210
18
23
29
32
35
42
49
56
63
20
30
39
49
60
70
80
89
20.5
25
32
41
50
60
73
88
101
400
500
600
700
800
900
12000 15000 18000 21000 24000 27000
POWER (HP)
Max. speed
(r/min)
Std. rotor: 11000
Spl. rotor: 17000
Std. rotor: 10000
Spl. rotor: 15000
Std. rotor: 9000
Spl. rotor: 13000
Std. rotor: 8000
Spl. rotor: 11000
Std. rotor: 6500
Spl. rotor: 9000
NOTES:
1. FRAME SIZE: (F) dimension represents the stator diameter (BH), in inches having a decimal two places to the left (Ex: F
of 1181 = BH of 11.81). The (BM) dimension represents the stator core-length in inches.
2. POWER: The horsepower values represent the maximum continuous duty power allowable at a given speed using
standard rotor of a given frame. For application sizing, the frame is selected based on the power tables above and the
windings are designed to meet the individual power requirements of the application. TENV maximum power ratings are
based on winding temeprature rise of 80°C. Consult factory for performance using special rotor.
3. MAXIMUM SPEED: For standard rotor, this is the maximum allowable speed using die-cast rotor construction and
standard rotor bores. For special rotor, this is the maximum allowable speed using die-cast rotor construction with
encapsulation and standard rotor bores.
Reuland
17969 E. Railroad St. - Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
18
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
4 POLE PRODUCT CODE
ENCLOSURE
SHELL
FRAME
SIZE
(F)
CORE
LENGTH
(BM)
_
S - FOR
THE
STANDARD
SHELL
(SEE
STATOR
TABLE )
C - FOR A
CUSTOM
SHELL
LLIQUID
COOLED
(TELC)
F - FAN
COOLED
(TEFC)
FRAME
SIZE (F)
SEE
POWER
TABLES
ROTOR
ID BORE
(CA)
# OF
POLES
_
4
SENSOR
CODE
_
( A ) FOR
BLANKED
Ø(A)
SEE
POWER
TABLES
( B ) FOR
BLANKED
Ø(B)
X - NO
SHELL/
BLANKED
STATOR
OD
ROTOR
FIN
CODE
_
CORE
LENGTH
(BM)
N - NON
VENTED
(TENV)
ROTOR OD
(DB)
( C ) FOR
CUSTOM
MACHINED
Ø
SEE
ROTOR
TABLE
( P ) FOR
PUNCHED
DIAMETER
(SEE
STAMPED
STATOR ID
ON STATOR
TABLE)
ROTOR
FINS
REQUIRED
Y - YES
N - NO
ENTER
VALUE
FROM
ROW 1
OF
SENSOR
TABLE
( M ) FOR
STANDARD
MACHINED
DIAMETER
(SEE ROTOR
TABLE)
( C ) FOR
CUSTOM
MACHINED
DIAMETER
M - NO
SHELL/
MACHINED
STATOR
LEGEND
1. SHELL: Determine if a shell is required for the application. If a custom shell is required
consult factory for availability.
2. ENCLOSURE: Type of cooling (TELC, TEFC & TENV).
3. FRAME SIZE (F): See power tables & dimension tables for required frame.
4. CORE LENGTH (BM): See power tables for required core length. Custom lengths
available, consult factory.
5. ROTOR ID BORE (CA): See dimension tables for available blanked diameters. Consult
factory for custom rotor ID’s.
6. ROTOR OD (DB): See dimension tables for blanked diameters, standard machined
diameters or consult factory for custom machined diameters.
7. ROTOR FIN CODE: Are rotor fins required?
8. SENSOR CODE: See sensor code table for configurations. Consult factory for other
options.
Reuland
17969 E. Railroad St. – Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
19
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
4 POLE DATA
STATOR
LEAD
SIDE
FRAME
SIZE
STAMPED
STATOR
ID
( SHELL )
( SHELL )
BH
BHS
BMS
W¹
(max)
W²
(max)
BL
(max)
315
354
419
472
532
622
782
945
1063
1181
1338
1476
1694
1889
1.772
2.005
2.560
2.756
3.149
3.876
4.921
5.905
6.693
7.480
8.465
9.448
10.630
12.795
3.149
3.543
4.192
4.723
5.314
6.222
7.814
9.447
10.629
11.810
13.386
14.763
16.949
18.897
3.500
4.000
4.500
4.703
5.703
6.468
8.000
10.000
11.000
12.375
14.000
15.000
17.500
19.500
BM + 0.5
BM + 0.5
BM + 0.5
BM + 0.47
BM + 0.47
BM + 0.47
BM + 1.19
BM + 1.19
BM + 1.06
BM + 1.06
BM + 3
BM + 3.37
BM + 3.37
BM + 3.31
.78
.85
1.00
1.15
1.25
1.35
1.50
2.00
2.25
2.50
3.00
3.25
3.50
4.50
.95
1.00
1.25
1.40
1.50
1.70
2.00
2.25
2.50
2.75
3.25
3.50
4.00
5.00
2.9
3.3
3.8
4.5
5.2
6
7.5
9.2
10.1
11.5
12.5
13.8
16.5
18.5
ROTOR
FRAME
SIZE
DB
(mach.)
BO
(mach.)
(without fins)
BR
H
CA
(blanked Ø)
(with fins)
BR
H
H¹
A
B
CA
(mach.)
(max)
1.748
BM
.75
315
1.981
BM
1.200
.334
.875
354
2.536
BM + 0.25
1.660
.315
.710
.748
1.5
419
2.732
BM + 0.25
1.706
.400
1.706
.400
.750
.984
1.65
472
3.119
BM + 0.25
2.030
.511
2.030
.511
1.031
.990
1.81
532
3.846
BM + 0.25
2.837
.656
2.837
.656
1.280
.990
1.490
2.73
622
4.881
BM + 0.25
3.493
.718
3.493
.718
1.250
1.490
1.990
*3.65
782
5.865
BM + 0.25
3.750
.625
3.829
.678
1.350
1.740
2.165
3.75
945
6.643
BM + 0.25
4.567
.708
4.567
.708
2.086
1.990
2.559
4.5
1063
7.420
BM + 0.25
5.300
.781
5.300
.781
2.530
2.490
2.952
4.9
1181
8.395
BM + 0.25
5.875
.750
2.740
3.149
5.5
1338
9.368
BM + 0.25
6.000
.625
2.740
3.346
5.9
1476
10.540
BM + 0.25
3.937
4.331
6.5
1694
1889
12.685
BM + 0.25
7.875
.750
4.331
4.724
7.0
* requires use of a non standard end ring with large “BR” or machining of “BR” dimension to achieve max. “CA” dimension.
Reuland
17969 E. Railroad St. – Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
20
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
TOLERANCE
SENSORS
VALUE
OPTION
1
( 1 ) 150°C N.C. THERMAL SWITCH
2
( 3 ) 150°C N.C. THERMAL SWITCH, 1 PER PHASE
3
( 1 ) 100 ohm PLATINUM RTD
4
( 1 ) type "J" THERMOCOUPLE
5
( 1 ) type "K" THERMOCOUPLE
6
( 1 ) type "T" THERMOCOUPLE
7
( 1 ) PTC THERMISTOR
8
( 1 ) NTC THERMISTOR
Z
OTHER
w/shell
±.250
0.000/-0.002
0.000/-0.030
±.030
±.200
0.000/-0.001
±.025
±.200
±.001
BJ
BH
BHS
BM
BMS
BO
BL
CA
BR
BP
DB*
w/out shell
±.250
+0.003/-0.002
±.060
±.030
±.200
0.000/-0.001
±.025
±.200
±.001
* "DB" Customer to finish turn rotor to
specified diameter and balance.
Reuland may finish-turn upon request.
NOTES
1. Straight bore without keyway is standard.
2. Maximum bore shown is for standard die cast rotors without keyway; with keyway,
reduce by keyway depth. Larger bores may be available using die cast rotors with non
standard laminations and/or fabricated rotor construction. (Consult factory.)
3. Blanked bore is as die punched.
4. Speeds higher than the base 60 Hz rating may limit the maximum bore.
5. Standard lead length is 3 feet.
Reuland
17969 E. Railroad St. – Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
21
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
6 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
315 - 0.98
315 - 2.17
315 - 3.15
315 - 3.94
354 - 1.77
354 - 2.36
354 - 3.15
354 - 3.94
419 - 1.77
419 - 2.56
419 - 3.15
419 - 3.94
419 - 4.72
472 - 1.50
472 - 2.25
472 - 3.00
472 - 3.75
472 - 4.75
472 - 5.75
472 - 6.75
472 - 7.75
532 - 1.50
532 - 2.00
532 - 2.75
532 - 4.25
532 - 5.75
532 - 7.25
622 - 2.00
622 - 2.75
622 - 3.87
622 - 4.25
622 - 5.75
622 - 7.25
622 - 10.75
782 - 1.69
782 - 2.44
782 - 2.94
782 - 3.94
782 - 5.44
782 - 6.94
782 - 7.94
782 - 8.94
782 - 9.94
782 - 10.94
945 - 2.94
945 - 3.44
945 - 4.69
945 - 5.94
945 - 7.94
945 - 9.94
945 - 11.94
945 - 13.94
1063 - 2.75
1063 - 4.00
1063 - 6.00
1063 - 7.00
1063 - 9.00
1063 - 10.50
1063 - 12.50
1063 - 14.50
1063 - 16.50
POWER TABLE - LIQUID COOLED (TELC)
60
1200
100
2000
200
4000
300
6000
400
500
600
700
800
900
8000 10000 12000 14000 16000 18000
POWER (HP)
0.35
0.6
0.75
1
1.2
0.5
0.8
1.2
1.5
2
2.5
3
3.5
0.7
1
1.5
2.5
3.4
4.3
1.5
2.1
3.2
3.7
5.3
7
10.5
2
3.5
4.5
6.1
8.5
10.9
12.5
14.5
16.5
18.5
6.2
7.9
11.5
14.5
19.5
25
30
35
8
12
18
21
28
33
40
47
54
0.8
1.2
1.5
2
2.4
1.1
1.7
2.4
3
3.8
4.7
5.6
6.5
1.4
2
2.8
4.6
6.3
8
3.3
4.6
6.7
7.5
10.2
13
19
4.2
6.2
7.7
10.5
14.5
19
22
25
28
31
11.5
13.5
19
24.5
33
42
51
60
14
21
32
37
48
57
68
79
90
1.8
2.7
3.4
4.3
5.2
2.6
3.9
5.2
6.5
8.3
10
12
14
3.4
4.6
6.4
10
13.5
17
6.9
9.5
13.5
15
20
25.5
38
9
13
15.5
21
29.5
38
44
50
56
62
24
28.5
39
50
67
85
102
120
28
42
64
75
97
114
136
158
180
2.9
4.2
5.2
6.5
7.8
3.9
5.8
7.8
9.8
12.5
15
18
21
5.1
6.9
9.6
15
20
25.5
10.2
14
20
22
30
38
57
13.5
19.5
23.5
32
44
57
66
75
84
93
35
41
56
71
95
120
145
170
40
61
92
107
138
162
193
224
255
3.8
5.5
6.8
8.6
10.4
5.4
8.1
10.8
13.5
17
20.5
24
28
6.8
9.3
13
20
26.5
34
13.5
19
26.5
29.5
40
51
76
18
26.5
32
43
60
77
88
100
112
124
44
52
71
91
122
153
184
215
47
71
108
125
162
190
226
263
300
Reuland
17969 E. Railroad St. - Industry, CA 91749
4.7
6.9
8.6
10.8
13
6.7
10.1
13.5
17
21.5
26
31
35
8.6
11.5
16
24.5
33
42
17
23.5
33
36
49
62
92
22
32
39
53
73
94
108
122
136
150
51
60
83
106
142
178
214
250
47
71
108
125
162
190
226
263
300
5.8
8.4
10.4
13
15.5
8
12
16
20
25.5
31
36
42
10.5
14
19
29
39
50
19.5
27
38
42
57
72
107
24.5
36
43
58
81
104
120
136
152
168
51
60
83
106
142
178
214
250
Phone: (626) 854-7440
6.7
9.7
12
15
18
9
13.5
18
22.5
28.5
35
41
47
11.5
15
21
33
44
56
21.5
30
42
46
63
79
118
26.5
39
47
63
88
113
130
149
166
183
7.6
11
13.5
17
20.5
9.6
14.5
19.5
24.5
31
38
44
51
12.5
16.5
23
36
48
61
23
32
45
49
67
84
125
8.6
12.5
15.5
19
23
10.3
15.5
21
26
33
41
48
55
13.5
18
24.5
38
51
65
24.5
34
47
52
70
88
130
Max. speed
(r/min)
Std. rotor: 30000
Std. rotor: 28000
Std. rotor: 25000
Spl. rotor: 40000
Std. rotor: 19000
Spl. rotor: 30000
Std. rotor: 15000
Spl. rotor: 23000
Std. rotor: 12500
Spl. rotor: 19000
Std. rotor: 11000
Spl. rotor: 17000
www.reuland.com
Email: partialmotorsales@reuland.com
22
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
6 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
1181 - 5.56
1181 - 7.06
1181 - 9.06
1181 - 10.06
1181 - 11.06
1181 - 13.06
1181 - 15.06
1181 - 17.06
1181 - 19.06
1338 - 5.00
1338 - 7.50
1338 - 9.50
1338 - 12.00
1338 - 14.50
1338 - 17.00
1338 - 19.00
1338 - 21.00
1476 - 4.63
1476 - 5.63
1476 - 7.13
1476 - 9.13
1476 - 11.13
1476 - 13.13
1476 - 16.13
1476 - 19.13
1476 - 22.13
1694 - 5.63
1694 - 7.13
1694 - 9.13
1694 - 12.13
1694 - 15.13
1694 - 18.13
1694 - 21.13
1694 - 24.13
1889 - 7.19
1889 - 9.19
1889 - 10.19
1889 - 11.19
1889 - 13.19
1889 - 15.19
1889 - 17.19
1889 - 20.19
1889 - 23.19
1889 - 26.19
POWER TABLE - LIQUID COOLED (TELC)
60
1200
100
2000
200
4000
300
6000
22
28
36
40
44
53
62
70
78
28
42
54
68
82
96
108
120
37
45
57
73
89
105
130
155
180
63
80
103
137
171
205
240
275
106
135
150
165
195
225
255
300
345
390
36
46
60
67
74
88
102
116
130
47
71
90
114
138
162
181
200
60
74
94
122
149
177
218
259
300
106
135
174
231
288
345
402
460
177
226
251
276
326
376
425
500
575
650
75
95
122
136
150
177
204
232
260
82
123
156
197
238
279
312
345
90
111
141
182
223
265
327
389
450
174
221
283
376
469
562
656
750
300
383
425
467
552
636
720
847
974
1100
104
132
170
189
208
246
284
322
360
109
163
207
262
317
372
416
460
110
136
173
223
273
324
400
475
550
174
221
283
376
469
562
656
750
300
383
425
467
552
636
720
847
974
1100
400
500
600
700
800
900
8000 10000 12000 14000 16000 18000
POWER (HP)
104
104
132
132
170
170
189
189
208
208
246
246
284
284
322
322
360
360
109
163
207
262
317
372
416
460
110
136
173
223
273
324
400
475
550
174
221
283
376
469
562
656
750
Max. speed
(r/min)
Std. rotor: 10000
Spl. rotor: 15000
Std. rotor: 9000
Spl. rotor: 13000
Std. rotor: 8000
Spl. rotor: 11000
Std. rotor: 7500
Spl. rotor: 10000
Std. rotor: 6000
Spl. rotor: 8500
NOTES:
1. FRAME SIZE: (F) dimension represents the stator diameter (BH), in inches having a decimal two places to the left (Ex: F
of 1181 = BH of 11.81). The (BM) dimension represents the stator core-length in inches.
2. POWER: The horsepower values represent the maximum continuous duty power allowable at a given speed using
standard rotor of a given frame with adequate liquid cooling. For application sizing, the frame is selected based on the
power tables above and the windings are designed to meet the individual power requirements of the application. TELC
maximum power ratings are based on winding temeprature rise of 130°C. Consult factory for performance using special
rotor.
3. MAXIMUM SPEED: For standard rotor, this is the maximum allowable speed using die-cast rotor construction and
standard rotor bores. For special rotor, this is the maximum allowable speed using die-cast rotor construction with
encapsulation and standard rotor bores.
Reuland
17969 E. Railroad St. - Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
23
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
6 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
315 - 0.98
315 - 2.17
315 - 3.15
315 - 3.94
354 - 1.77
354 - 2.36
354 - 3.15
354 - 3.94
419 - 1.77
419 - 2.56
419 - 3.15
419 - 3.94
419 - 4.72
472 - 1.50
472 - 2.25
472 - 3.00
472 - 3.75
472 - 4.75
472 - 5.75
472 - 6.75
472 - 7.75
532 - 1.50
532 - 2.00
532 - 2.75
532 - 4.25
532 - 5.75
532 - 7.25
622 - 2.00
622 - 2.75
622 - 3.87
622 - 4.25
622 - 5.75
622 - 7.25
622 - 10.75
782 - 1.69
782 - 2.44
782 - 2.94
782 - 3.94
782 - 5.44
782 - 6.94
782 - 7.94
782 - 8.94
782 - 9.94
782 - 10.94
945 - 2.94
945 - 3.44
945 - 4.69
945 - 5.94
945 - 7.94
945 - 9.94
945 - 11.94
945 - 13.94
1063 - 2.75
1063 - 4.00
1063 - 6.00
1063 - 7.00
1063 - 9.00
1063 - 10.50
1063 - 12.50
1063 - 14.50
1063 - 16.50
POWER TABLE - FAN COOLED (TEFC)
60
1200
100
2000
200
4000
300
6000
400
500
600
700
800
900
8000 10000 12000 14000 16000 18000
POWER (HP)
0.19
0.35
0.49
0.7
0.88
0.26
0.42
0.61
0.78
1.05
1.3
1.6
1.9
0.52
0.7
0.98
1.6
2.2
2.8
0.96
1.4
2.1
2.5
3.5
4.7
7
1.2
2.1
2.8
3.9
5.4
7
8.1
9.3
10.7
12
3.8
5
7.4
9.3
12.5
15.5
18.5
22
4.6
7
10.6
12.5
16.5
19.5
24
28
32
0.26
0.49
0.7
0.96
1.2
0.42
0.65
0.93
1.2
1.6
1.9
2.5
3
0.7
0.96
1.3
2.1
3
3.9
1.2
1.9
3
3.3
4.7
6.5
9.5
1.8
3.2
4
5.6
7.9
10
11.5
13.5
15.5
17.5
5.5
7.2
10.6
13.5
18
23
27.5
32
6.6
10.2
15
18
24
28
34
40
46
0.49
0.88
1.2
1.7
2.3
0.7
1.1
1.5
1.9
2.6
3.2
4.2
5.1
1.05
1.5
2.1
3.3
4.9
6.2
1.9
3
4.7
5.3
7.7
10.3
15
2.8
5.1
6.5
8.8
12.5
16
18.5
21
24.5
28
8.7
11.5
16.5
21
27.5
35
44
51
9.6
14.5
22
26
34
40
49
58
66
0.6
1.05
1.5
2.1
2.7
0.78
1.4
1.9
2.5
3.3
4
5.1
6.3
1.4
1.9
2.6
4.2
6
7.5
2.3
3.5
5.3
6.1
8.8
11.5
17.5
3
5.1
6.7
9.1
13
17
19.5
22.5
26
30
7.8
10.5
15.5
19.5
26
32
40
47
8.8
13
20
24
31
37
44
52
60
0.65
1.2
1.7
2.3
3
0.88
1.6
2.3
2.9
3.9
4.7
5.8
7
1.6
2.1
2.9
4.7
6.7
8.4
2.3
3.5
5.3
6.1
8.8
11.5
17.5
2.8
4.7
6.3
8.6
12
16
18.5
21
24.5
28
7.2
9.5
14
17.5
24
29.5
36
42
7.8
12
18
21.5
28
33
40
47
54
Reuland
17969 E. Railroad St. - Industry, CA 91749
0.61
1.1
1.6
2.2
2.9
0.88
1.5
2.1
2.7
3.5
4.2
5.3
6.5
1.4
1.9
2.6
4.4
6.2
7.9
2.1
3.2
4.7
5.4
7.9
10.6
16
2.6
4.4
5.8
7.7
11
14
16.5
19
22
25.5
6.3
8.2
12.5
15.5
20.5
25.5
31
36
7
10.6
16
19
25
30
36
42
48
0.57
1.05
1.5
2.1
2.7
0.78
1.3
1.9
2.4
3.2
3.9
4.9
6
1.3
1.8
2.5
4
5.8
7.4
1.9
2.8
4.2
4.9
7.2
9.6
14.5
2.3
3.9
5.3
7
10
13
15
17
20
23
5.5
7.2
10.6
13.5
17.5
22
26.5
31
Phone: (626) 854-7440
0.52
0.95
1.4
1.9
2.5
0.7
1.2
1.8
2.3
2.9
3.5
4.4
5.4
1.2
1.6
2.3
3.7
5.3
6.7
1.8
2.5
3.9
4.4
6.3
8.6
13
2.1
3.5
4.7
6.3
9.1
11.5
13.5
15.5
18
21
0.49
0.88
1.3
1.7
2.3
0.61
1.05
1.6
2
2.6
3.2
4
4.9
1.05
1.4
2.1
3.3
4.7
6
1.6
2.3
3.3
3.9
5.6
7.5
11
0.45
0.8
1.2
1.6
2.1
0.52
0.88
1.4
1.8
2.3
2.8
3.5
4.4
0.9
1.2
1.8
3
4.2
5.3
1.3
1.9
2.8
3.3
4.7
6.5
9.6
Max. speed
(r/min)
Std. rotor: 30000
Std. rotor: 28000
Std. rotor: 25000
Spl. rotor: 40000
Std. rotor: 19000
Spl. rotor: 30000
Std. rotor: 15000
Spl. rotor: 23000
Std. rotor: 12500
Spl. rotor: 19000
Std. rotor: 11000
Spl. rotor: 17000
www.reuland.com
Email: partialmotorsales@reuland.com
24
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
6 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
1181 - 5.56
1181 - 7.06
1181 - 9.06
1181 - 10.06
1181 - 11.06
1181 - 13.06
1181 - 15.06
1181 - 17.06
1181 - 19.06
1338 - 5.00
1338 - 7.50
1338 - 9.50
1338 - 12.00
1338 - 14.50
1338 - 17.00
1338 - 19.00
1338 - 21.00
1476 - 4.63
1476 - 5.63
1476 - 7.13
1476 - 9.13
1476 - 11.13
1476 - 13.13
1476 - 16.13
1476 - 19.13
1476 - 22.13
1694 - 5.63
1694 - 7.13
1694 - 9.13
1694 - 12.13
1694 - 15.13
1694 - 18.13
1694 - 21.13
1694 - 24.13
1889 - 7.19
1889 - 9.19
1889 - 10.19
1889 - 11.19
1889 - 13.19
1889 - 15.19
1889 - 17.19
1889 - 20.19
1889 - 23.19
1889 - 26.19
POWER TABLE - FAN COOLED (TEFC)
60
1200
100
2000
200
4000
300
6000
13.5
17.5
22.5
24.5
27
32
37
42
47
18.5
28
35
44
54
64
72
80
22.5
27.5
35
44
54
63
78
92
107
38
48
61
81
103
124
145
166
81
105
117
129
150
174
198
234
267
303
20
25.5
33
36
40
48
55
62
70
32
48
60
76
90
108
122
136
37
45
57
72
88
105
130
155
181
64
81
104
138
175
209
244
281
138
177
195
216
252
294
333
393
450
510
31
40
51
56
62
74
86
100
110
35
52
66
82
100
118
134
150
41
50
63
80
99
118
143
172
200
64
81
104
138
175
209
244
281
138
177
195
216
252
294
333
393
450
510
28
36
46
51
56
68
78
90
100
31
47
60
75
90
108
122
136
38
46
58
74
90
107
131
158
183
58
72
92
122
154
186
216
248
120
156
174
192
222
258
294
348
396
450
400
500
600
700
800
900
8000 10000 12000 14000 16000 18000
POWER (HP)
24
19.5
31
25
40
32
44
36
49
40
58
48
66
56
78
64
86
71
27
41
52
66
80
94
108
120
33
40
50
63
78
92
113
137
160
49
62
79
106
133
159
186
214
Max. speed
(r/min)
Std. rotor: 10000
Spl. rotor: 15000
Std. rotor: 9000
Spl. rotor: 13000
Std. rotor: 8000
Spl. rotor: 11000
Std. rotor: 7500
Spl. rotor: 10000
Std. rotor: 6000
Spl. rotor: 8500
NOTES:
1. FRAME SIZE: (F) dimension represents the stator diameter (BH), in inches having a decimal two places to the left (Ex: F
of 1181 = BH of 11.81). The (BM) dimension represents the stator core-length in inches.
2. POWER: The horsepower values represent the maximum continuous duty power allowable at a given speed using
standard rotor of a given frame with adequate air cooling. For application sizing, the frame is selected based on the power
tables above and the windings are designed to meet the individual power requirements of the application. TEFC maximum
power ratings are based on winding temeprature rise of 80°C. Consult factory for performance using special rotor.
3. MAXIMUM SPEED: For standard rotor, this is the maximum allowable speed using die-cast rotor construction and
standard rotor bores. For special rotor, this is the maximum allowable speed using die-cast rotor construction with
encapsulation and standard rotor bores.
Reuland
17969 E. Railroad St. - Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
25
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
6 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
315 - 0.98
315 - 2.17
315 - 3.15
315 - 3.94
354 - 1.77
354 - 2.36
354 - 3.15
354 - 3.94
419 - 1.77
419 - 2.56
419 - 3.15
419 - 3.94
419 - 4.72
472 - 1.50
472 - 2.25
472 - 3.00
472 - 3.75
472 - 4.75
472 - 5.75
472 - 6.75
472 - 7.75
532 - 1.50
532 - 2.00
532 - 2.75
532 - 4.25
532 - 5.75
532 - 7.25
622 - 2.00
622 - 2.75
622 - 3.87
622 - 4.25
622 - 5.75
622 - 7.25
622 - 10.75
782 - 1.69
782 - 2.44
782 - 2.94
782 - 3.94
782 - 5.44
782 - 6.94
782 - 7.94
782 - 8.94
782 - 9.94
782 - 10.94
945 - 2.94
945 - 3.44
945 - 4.69
945 - 5.94
945 - 7.94
945 - 9.94
945 - 11.94
945 - 13.94
1063 - 2.75
1063 - 4.00
1063 - 6.00
1063 - 7.00
1063 - 9.00
1063 - 10.50
1063 - 12.50
1063 - 14.50
1063 - 16.50
POWER TABLE - NON VENTED (TENV)
60
1200
100
2000
200
4000
300
6000
400
500
600
700
800
900
8000 10000 12000 14000 16000 18000
POWER (HP)
0.11
0.2
0.28
0.4
0.5
0.15
0.24
0.35
0.45
0.6
0.72
0.9
1.1
0.3
0.4
0.55
0.9
1.2
1.6
0.55
0.8
1.2
1.4
2
2.7
4
0.7
1.2
1.6
2.2
3.1
4
4.6
5.3
6.1
7
2
2.6
3.9
4.9
6.5
8.1
9.8
11.5
2.3
3.5
5.3
6.2
8.3
9.7
12
14
16
0.15
0.28
0.4
0.55
0.7
0.24
0.37
0.55
0.7
0.9
1.1
1.4
1.7
0.4
0.55
0.76
1.2
1.7
2.2
0.7
1.1
1.7
1.9
2.7
3.7
5.4
1
1.8
2.3
3.2
4.5
5.8
6.6
7.7
8.8
10
2.9
3.8
5.6
7.1
9.3
12
14.5
17
3.3
5.1
7.6
9
12
14
17
20
23
0.28
0.5
0.7
1
1.3
0.4
0.64
0.95
1.2
1.5
1.8
2.4
2.9
0.6
0.85
1.2
1.9
2.8
3.5
1.1
1.7
2.7
3
4.4
5.9
8.7
1.6
2.9
3.7
5
7.2
9.3
10.6
12
14
16
4.6
6
8.8
11
14.5
18.5
23
27
4.8
7.3
11
13
17
20
24.5
29
33
0.34
0.6
0.85
1.2
1.5
0.45
0.78
1.1
1.4
1.9
2.3
2.9
3.6
0.79
1.1
1.5
2.4
3.4
4.3
1.3
2
3
3.5
5
6.7
10
1.7
2.9
3.8
5.2
7.5
9.6
11
13
15
17
4.1
5.4
8.1
10.2
13.5
17
21
24.5
4.4
6.6
9.9
12
15.5
18.5
22.5
26
30
0.37
0.7
1
1.3
1.7
0.5
0.9
1.3
1.6
2.2
2.7
3.3
4
0.9
1.2
1.7
2.7
3.8
4.8
1.3
2
3
3.5
5
6.7
10
1.6
2.7
3.6
4.9
7
9.1
10.5
12
14
16
3.8
5
7.4
9.3
12.5
15.5
19
22
3.9
6
8.9
10.8
14
16.5
20
23.5
27
Reuland
17969 E. Railroad St. - Industry, CA 91749
0.35
0.65
0.92
1.2
1.6
0.5
0.82
1.2
1.5
2
2.4
3
3.7
0.82
1.1
1.5
2.5
3.5
4.5
1.2
1.8
2.7
3.1
4.5
6.1
9.1
1.5
2.5
3.3
4.4
6.3
8.1
9.4
10.8
12.5
14.5
3.3
4.3
6.5
8.2
10.8
13.5
16.5
19
3.5
5.3
8
9.5
12.5
15
18
21
24
0.33
0.6
0.85
1.1
1.5
0.45
0.75
1.1
1.4
1.8
2.2
2.8
3.4
0.75
1
1.4
2.3
3.3
4.2
1.1
1.6
2.4
2.8
4.1
5.5
8.2
1.3
2.2
3
4
5.7
7.4
8.5
9.8
11
13
2.9
3.8
5.6
7.1
9.3
11.5
14
16.5
Phone: (626) 854-7440
0.3
0.54
0.79
1.05
1.4
0.4
0.67
1
1.2
1.6
2
2.5
3.1
0.68
0.9
1.3
2.1
3
3.8
1
1.4
2.2
2.5
3.6
4.9
7.3
1.2
2
2.7
3.6
5.2
6.8
7.8
9
10
12
0.28
0.5
0.72
1
1.3
0.35
0.6
0.9
1.1
1.5
1.8
2.3
2.8
0.6
0.8
1.2
1.9
2.7
3.4
0.9
1.3
1.9
2.2
3.2
4.3
6.4
0.26
0.46
0.67
0.95
1.2
0.3
0.5
0.8
1
1.3
1.6
2
2.5
0.53
0.7
1
1.7
2.4
3
0.75
1.1
1.6
1.9
2.7
3.7
5.5
Max. speed
(r/min)
Std. rotor: 30000
Std. rotor: 28000
Std. rotor: 25000
Spl. rotor: 40000
Std. rotor: 19000
Spl. rotor: 30000
Std. rotor: 15000
Spl. rotor: 23000
Std. rotor: 12500
Spl. rotor: 19000
Std. rotor: 11000
Spl. rotor: 17000
www.reuland.com
Email: partialmotorsales@reuland.com
26
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
6 POLE
Frequency (Hz)
Syn. speed (r/min)
(F) - (BM)
1181 - 5.56
1181 - 7.06
1181 - 9.06
1181 - 10.06
1181 - 11.06
1181 - 13.06
1181 - 15.06
1181 - 17.06
1181 - 19.06
1338 - 5.00
1338 - 7.50
1338 - 9.50
1338 - 12.00
1338 - 14.50
1338 - 17.00
1338 - 19.00
1338 - 21.00
1476 - 4.63
1476 - 5.63
1476 - 7.13
1476 - 9.13
1476 - 11.13
1476 - 13.13
1476 - 16.13
1476 - 19.13
1476 - 22.13
1694 - 5.63
1694 - 7.13
1694 - 9.13
1694 - 12.13
1694 - 15.13
1694 - 18.13
1694 - 21.13
1694 - 24.13
1889 - 7.19
1889 - 9.19
1889 - 10.19
1889 - 11.19
1889 - 13.19
1889 - 15.19
1889 - 17.19
1889 - 20.19
1889 - 23.19
1889 - 26.19
POWER TABLE - NON VENTED (TENV)
60
1200
100
2000
200
4000
300
6000
6.7
8.5
10.8
12
13.5
16.5
19
21.5
24
9.3
14
17.5
22
27
32
36
40
10.8
13
16.5
21
25.5
30
37
44
51
16.5
21
26.5
35
45
54
63
72
27
35
39
43
50
58
66
78
89
101
10
12.5
16
18
20
24
27.5
31
35
16
24
30
38
45
54
61
68
18
21.5
27
34
42
50
62
74
86
28
35
45
60
76
91
106
122
46
59
65
72
84
98
111
131
150
170
15.5
20
25.5
28
31
37
43
50
55
17.5
26
33
41
50
59
67
75
20
24
30
38
47
56
68
82
95
28
35
45
60
76
91
106
122
46
59
65
72
84
98
111
131
150
170
14
18
23
25
28
34
39
45
50
15.5
23.5
30
37
45
54
61
68
18
22
27.5
35
43
51
62
75
87
25
31
40
53
67
81
94
108
40
52
58
64
74
86
98
116
132
150
400
500
600
700
800
900
8000 10000 12000 14000 16000 18000
POWER (HP)
12
9.8
15.5
12.5
19.5
16
22
18
24.5
20
29
24
33
28
39
32
43
36
13.5
20.5
26
33
40
47
54
60
15.5
19
24
30
37
44
54
65
76
21.5
27
34
46
58
69
81
93
Max. speed
(r/min)
Std. rotor: 10000
Spl. rotor: 15000
Std. rotor: 9000
Spl. rotor: 13000
Std. rotor: 8000
Spl. rotor: 11000
Std. rotor: 7500
Spl. rotor: 10000
Std. rotor: 6000
Spl. rotor: 8500
NOTES:
1. FRAME SIZE: (F) dimension represents the stator diameter (BH), in inches having a decimal two places to the left (Ex: F
of 1181 = BH of 11.81). The (BM) dimension represents the stator core-length in inches.
2. POWER: The horsepower values represent the maximum continuous duty power allowable at a given speed using
standard rotor of a given frame. For application sizing, the frame is selected based on the power tables above and the
windings are designed to meet the individual power requirements of the application. TENV maximum power ratings are
based on winding temeprature rise of 80°C. Consult factory for performance using special rotor.
3. MAXIMUM SPEED: For standard rotor, this is the maximum allowable speed using die-cast rotor construction and
standard rotor bores. For special rotor, this is the maximum allowable speed using die-cast rotor construction with
encapsulation and standard rotor bores.
Reuland
17969 E. Railroad St. - Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
27
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
6 POLE PRODUCT CODE
ENCLOSURE
SHELL
FRAME
SIZE
(F)
CORE
LENGTH
(BM)
_
S - FOR
THE
STANDARD
SHELL
(SEE
STATOR
TABLE )
C - FOR A
CUSTOM
SHELL
LLIQUID
COOLED
(TELC)
F - FAN
COOLED
(TEFC)
FRAME
SIZE (F)
SEE
POWER
TABLES
ROTOR
ID BORE
(CA)
# OF
POLES
_
6
SENSOR
CODE
_
( A ) FOR
BLANKED
Ø(A)
SEE
POWER
TABLES
( B ) FOR
BLANKED
Ø(B)
X - NO
SHELL/
BLANKED
STATOR
OD
ROTOR
FIN
CODE
_
CORE
LENGTH
(BM)
N - NON
VENTED
(TENV)
ROTOR OD
(DB)
( C ) FOR
CUSTOM
MACHINED
Ø
SEE
ROTOR
TABLE
( P ) FOR
PUNCHED
DIAMETER
(SEE
STAMPED
STATOR ID
ON STATOR
TABLE)
ROTOR
FINS
REQUIRED
Y - YES
N - NO
ENTER
VALUE
FROM
ROW 1
OF
SENSOR
TABLE
( M ) FOR
STANDARD
MACHINED
DIAMETER
(SEE ROTOR
TABLE)
( C ) FOR
CUSTOM
MACHINED
DIAMETER
M - NO
SHELL/
MACHINED
STATOR
LEGEND
1. SHELL: Determine if a shell is required for the application. If a custom shell is required
consult factory for availability.
2. ENCLOSURE: Type of cooling (TELC, TEFC & TENV).
3. FRAME SIZE (F): See power tables & dimension tables for required frame.
4. CORE LENGTH (BM): See power tables for required core length. Custom lengths
available, consult factory.
5. ROTOR ID BORE (CA): See dimension tables for available blanked diameters. Consult
factory for custom rotor ID’s.
6. ROTOR OD (DB): See dimension tables for blanked diameters, standard machined
diameters or consult factory for custom machined diameters.
7. ROTOR FIN CODE: Are rotor fins required?
8. SENSOR CODE: See sensor code table for configurations. Consult factory for other
options.
Reuland
17969 E. Railroad St. – Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
28
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
6 POLE DATA
STATOR
LEAD
SIDE
FRAME
SIZE
STAMPED
STATOR
ID
( SHELL )
( SHELL )
BH
BHS
BMS
W¹
(max)
W²
(max)
BL
(max)
315
354
419
472
532
622
782
945
1063
1181
1338
1476
1694
1889
2.756
3.149
3.346
4.331
5.514
6.693
7.480
8.465
9.448
10.630
11.417
13.386
4.192
4.723
5.314
6.222
7.814
9.447
10.629
11.810
13.386
14.763
16.949
18.897
4.500
4.703
5.703
6.468
8.000
10.000
11.000
12.375
14.000
15.000
17.500
19.500
BM + 0.5
BM + 0.47
BM + 0.47
BM + 0.47
BM + 1.19
BM + 1.19
BM + 1.06
BM + 1.06
BM + 3
BM + 3.37
BM + 3.37
BM + 3.31
1.00
1.15
1.25
1.35
1.50
2.00
2.25
2.50
3.00
3.25
3.50
4.50
1.25
1.40
1.50
1.70
2.00
2.25
2.50
2.75
3.25
3.50
4.00
5.00
3.8
4.5
5.2
6
7.5
9.2
10.1
11.5
12.5
13.8
16.5
18.5
ROTOR
FRAME
SIZE
DB
(mach.)
BO
(mach.)
(without fins)
BR
H
CA
(blanked Ø)
(with fins)
BR
H
H¹
A
B
CA
(mach.)
(max)
315
354
2.732
BM + 0.25
1.706
.400
1.706
.400
.750
.710
.748
1.65
419
3.125
BM + 0.25
2.030
.511
2.244
.400
.750
.984
2.15
472
3.316
BM + 0.25
2.450
.656
2.500
.531
1.000
.990
2.0
532
4.301
BM + 0.25
3.118
.343
3.118
.343
1.000
.990
1.490
*3.3
622
5.484
BM + 0.25
4.118
.375
1.000
1.490
1.990
*4.3
782
6.663
BM + 0.25
4.567
.708
4.717
.433
1.500
1.740
2.165
*4.9
945
7.440
BM + 0.25
5.300
.781
5.157
.312
1.700
1.990
2.559
*5.9
1063
8.425
BM + 0.25
6.500
.900
6.096
.900
2.400
2.490
2.952
6.5
1181
9.398
BM + 0.25
6.000
.625
2.740
3.149
*6.75
1338
10.580
BM + 0.25
2.740
3.346
6.9
1476
11.361
BM + 0.25
7.500
.750
7.500
.650
2.500
3.937
4.331
7.5
1694
1889
13.316
BM + 0.25
9.180
.750
9.180
.750
2.500
4.331
4.724
8.6
* requires use of a non standard end ring with large “BR” or machining of “BR” dimension to achieve max. “CA” dimension.
Reuland
17969 E. Railroad St. – Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
29
Release: Jan 2012
REULAND PARTIAL MOTORS
Stator & Rotor Sets
TOLERANCE
SENSORS
VALUE
OPTION
1
( 1 ) 150°C N.C. THERMAL SWITCH
2
( 3 ) 150°C N.C. THERMAL SWITCH, 1 PER PHASE
3
( 1 ) 100 ohm PLATINUM RTD
4
( 1 ) type "J" THERMOCOUPLE
5
( 1 ) type "K" THERMOCOUPLE
6
( 1 ) type "T" THERMOCOUPLE
7
( 1 ) PTC THERMISTOR
8
( 1 ) NTC THERMISTOR
Z
OTHER
w/shell
±.250
0.000/-0.002
0.000/-0.030
±.030
±.200
0.000/-0.001
±.025
±.200
±.001
BJ
BH
BHS
BM
BMS
BO
BL
CA
BR
BP
DB*
w/out shell
±.250
+0.003/-0.002
±.060
±.030
±.200
0.000/-0.001
±.025
±.200
±.001
* "DB" Customer to finish turn rotor to
specified diameter and balance.
Reuland may finish-turn upon request.
NOTES
1. Straight bore without keyway is standard.
2. Maximum bore shown is for standard die cast rotors without keyway; with keyway,
reduce by keyway depth. Larger bores may be available using die cast rotors with non
standard laminations and/or fabricated rotor construction. (Consult factory.)
3. Blanked bore is as die punched.
4. Speeds higher than the base 60 Hz rating may limit the maximum bore.
5. Standard lead length is 3 feet.
Reuland
17969 E. Railroad St. – Industry, CA 91749
Phone: (626) 854-7440
www.reuland.com
Email: partialmotorsales@reuland.com
30