www.torrtech.com sales@torrtech.com PRICE LIST April 2013 TORR TECHNOLOGIES INC USA (800)845-4424 INT’L (253)735-9115 FAX (253)735-0437 Prices shown are in US dollars Prices subject to change without notice 1435 22ND ST NW AUBURN WA 98001 QUICK-DISCONNECTS GENERAL INFORMATION The QD10 series is available with male or female NPT (pipe) threads. The plug (nipple) is the male half of the quick-disconnect. The coupler (socket) is the female half and has a sliding collar. The QD11 is available with integral female threads only but we offer 2-piece assembled units with male threads. See separate section for threaded fittings and adapters. Except as noted, quick-disconnects have Viton™ seals rated to 400°F continuous. A few are available with silicone seals rated to 450°F continuous. QD10 SERIES · Snap-Tite EA series connection specifically manufactured · for vacuum and medium pressure service. · · Internal valve for instant shut-off on disconnect. Plug · available without internal valve (PEAN series). Call or · email for pricing and availability. DESCRIPTION 100504 100514 P/N Plug, 1/4” fem NPT Plug, 3/8” fem NPT Plug, 1/2” fem NPT Plug, 1/4” fem NPT, stainless Plug, 1/2” fem NPT, stainless Plug, 1/4” male NPT Plug, 3/8” male NPT Plug, 1/2” male NPT Plug, 1/4” male NPT, stainless Plug, 1/2” male NPT, stainless QD11 SERIES · ISO 7241-B style, industrial interchange. · Both plug and coupler internally valved for instant flow on connect, positive shut-off on disconnect. · Heat-treated zinc dichromate-plated steel or stainless steel. 110504 110514 ~ .52” ~ .44” Use the following dimensions to determine what size fitting you require: 3/8” npt: male thread OD fem. thread ID ~ .66” ~ .57” 1/2” npt: male thread OD fem. thread ID ~ .82” ~ .72” 101504 101514 PART # Plug, 1/8” fem NPT Plug, 1/4” fem NPT Plug, 3/8” fem NPT Plug, 1/2” fem NPT Plug, 1/4” fem NPT, stainless Plug, 3/8” fem NPT, stainless Plug, 1/2” fem NPT, stainless 110502 110504 110506 110508 118504 118506 118508 EACH $ 6.00 6.70 8.05 8.75 15.95 26.20 41.55 Plug, 1/4” male NPT Plug, 3/8” male NPT Plug, 1/2” male NPT Plug, 1/4” male NPT, stainless Plug, 3/8” male NPT, stainless Plug, 1/2” male NPT, stainless 110514 110516 110518 118514 118516 118518 $ 9.25 10.70 12.25 24.25 36.80 55.60 111514 P/N Price 101504 101506 101508 109504 109508 101514 101516 101518 109514 109518 $ 24.15 31.95 34.40 60.60 111.70 $ 24.80 32.80 35.35 66.85 126.85 A 1/4, A=.56” 3/8, A=.75” 1/2, A=.92” Measure diameter of nipple to determine size of an existing fitting DESCRIPTION 111504 1/4, A=.48” 3/8, A=.58” 1/2, A=.70” Measure diameter of nipple to determine size of an existing fitting Coupler, 1/4” fem NPT Coupler, 3/8” fem NPT Coupler, 1/2” fem NPT Coupler, 1/4” fem NPT, stainless Coupler, 1/2” fem NPT, stainless Coupler, 1/4” male NPT Coupler, 3/8” male NPT Coupler, 1/2” male NPT Coupler, 1/4” male NPT, stainless Coupler, 1/2” male NPT, stainless Comes standard with Viton seals, 400°F continuous. Silicone seals available (-S), 450°F continuous. Available in 1/4”, 3/8”, and 1/2” female NPT. Male thread option is an assembly provided by Torr. DESCRIPTION A DESCRIPTION $ 16.95 20.25 22.45 42.20 76.80 $ 17.55 21.00 23.35 48.45 92.00 · · · · 1/4” npt: male thread OD fem. thread ID Heat-treated zinc dichromate-plated steel or stainless steel. Comes standard with Viton seals, 400°F continuous. Silicone seals available (-S), 450°F continuous. Available in 1/4”, 3/8”, and 1/2” male & female NPT. Price 100504 100506 100508 108504 108508 100514 100516 100518 108514 108518 Pipe Thread Sizes PART # EACH Coupler, 1/8” fem NPT Coupler, 1/4” fem NPT Coupler, 3/8” fem NPT Coupler, 1/2” fem NPT Coupler, 1/4” fem NPT, stainless Coupler, 3/8” fem NPT, stainless Coupler, 1/2” fem NPT, stainless 111502 111504 111506 111508 119504 119506 119508 $ 14.85 14.15 17.65 22.25 38.30 53.75 88.30 Coupler, 1/4” male NPT Coupler, 3/8” male NPT Coupler, 1/2” male NPT Coupler, 1/4” male NPT, stainless Coupler, 3/8” male NPT, stainless Coupler, 1/2” male NPT, stainless 111514 111516 111518 119514 119516 119518 $ 16.70 20.30 25.75 46.60 64.35 102.40 PIPE NIPPLES, NPT BRASS DESCRIPTION HEX NIPPLE 1/8” x 1/8” 1/4” x 1/8” 1/4” x 1/4”(short) 1/4” x 1/4” 3/8” x 1/4” 3/8” x 3/8”(short) 3/8” x 3/8” 1/2” x 1/4” 1/2” x 3/8” 1/2” x 1/2” STEEL, PLATED STAINLESS STEEL EACH PART # EACH PART # EACH DESCRIPTION PART # EACH 23325x2 $1.20 23325x4x2 1.45 E23325x4 1.35 23325x4 1.65 23325x6x4 2.30 E23325x6 2.15 23325x6 2.30 23325x8x4 3.10 23325x8x6 3.35 23325X8 3.40 911-2-2 $1.35 911-4-2 1.80 ... ... 911-4-4 1.55 911-6-4 2.05 ... ... 911-6-6 1.65 911-8-4 2.85 911-8-6 2.40 911-8-8 2.50 911-2-2SS 911-4-2SS ... 911-4-4SS 911-6-4SS ... 911-6-6SS 911-8-4SS 911-8-6SS 911-8-8SS $6.40 9.25 ... 7.30 10.90 ... 9.60 16.45 15.25 13.00 1/8”, brass 1/4”, brass 3/8”, brass 1/2”, brass 226x075 246x088 266x100 286x112 $1.00 1.40 1.65 2.60 1/8” stainless steel 1/4” stainless steel 3/8” stainless steel 1/2” stainless steel 426x075 446x088 466x100 486x112 2.20 2.45 2.50 3.25 PART # Printed on recycled paper 1 CLOSE NIPPLE © 2013 TORR TECHNOLOGIES INC www.torrtech.com sales@torrtech.com PRICE LIST April 2013 TORR TECHNOLOGIES INC USA (800)845-4424 INT’L (253)735-9115 FAX (253)735-0437 Prices shown are in US dollars Prices subject to change without notice 1435 22ND ST NW AUBURN WA 98001 VACUUM HOSE Our vacuum hose assemblies are made in-house so lead times are short. We request 1 day for VH20 and VH22, and 2-3 days for welded VH23 & VH24 assemblies. Same day service available. PART NO. 20 12 6 4 - 4/90 HOSE TYPE LENGTH IN FEET HOSE ID 20 22 23 24 example: 22 06 64 denotes 6 ft. For inch lengths, separate with hyphens. Example: 22-42-64 denotes 42” 4 -1/4” 6 -3/8” 8 -1/2” TO DETERMINE PART NUMBER Use this chart, or call and specify type, ID, length, and required end fittings. EXAMPLE: p/n 221064-4/90 VH22, 10 ft, 3/8” ID, 1/4” male NPT x 1/4” 90° male npt VH22 AUTOCLAVE/OVEN • Max. temp: 400°F (204°C) continuous • 150 psi external to 100 psi internal pressure • Aramid fiber-reinforced silicone construction • Stainless steel liner • .38” ID x .70” OD & .50” ID x .86” OD • End fittings: NPT, SAE, JIC The flexible VH22 has a resilient outer covering that prevents bag punctures, mold damage, and injuries to users. Aramid reinforcement is super ior to glass and dacron. this number required only if different from other fitting END FITTING 4 -1/4” male NPT 4/90 -1/4” male NPT 90° elbow 6 -3/8” male NPT 6/90 -3/8” male NPT 90° elbow 8 -1/2” male NPT 8/90 -1/2” male NPT 90° elbow 4FNPT - 1/4” fem NPT 6FNPT - 3/8” fem NPT 8FNPT - 1/2” fem NPT 4SAE - 1/4” fem SAE swivel 6SAE - 3/8” fem SAE swivel 8SAE - 1/2” fem SAE swivel 4JIC - 1/4” fem JIC swivel 6JIC - 3/8” fem JIC swivel 8JIC - 1/2” fem JIC swivel 4BSPT - 1/4” male BSPT VH22 3/8" ID autoclave/oven vacuum hose VH22 1/2" ID autoclave/oven vacuum hose Price includes 1/4” male NPT fittings. Add $1.00 per 1/4” female NPT end. Add $2.00 per 90° end. Add $2.00 per 3/8”, 1/2”, and non-NPT end. VH23 AUTOCLAVE/OVEN JIC HOSE REPAIR VH22: $14.00/end. VH23 & VH24: $22.00/end. Hose testing: $12.00/hose (applied towards repair charge). Resin-filled hoses or hoses with fused liner are not repairable. NPT • • • • • • Max. temp: 1000°F (538°C) continuous 200 psi external 100% stainless steel construction .375” ID x .630” OD Price includes 1/4” male NPT ends End fittings: NPT, JIC, BSPT VH23 SS flex autoclave/oven vacuum hose • Price per foot includes 1/4” male npt fittings • There is a minimum 3’ charge per hose • Add $1.60 per end for assembling quick-disconnects or other fittings VH20 ROOM TEMP $ 9.70 / ft. $ 11.40 / ft. VH24 AUTOCLAVE/OVEN • 1/4” & 3/8” rated 170°F (88°C), full vacuum • 1/2” rated 140°F (60°C), full vacuum • Double-reinforced, solvent-resistant covering • Available in 1/4”, 3/8”, and 1/2” ID • End fittings: NPT, SAE, JIC The VH20 combines durability, flexibility, flow, collapse-resistance, safety, & economy into a bright yellow, easily identifiable vacuum hose. VH20 1/4” ID room-temp vacuum hose VH20 3/8” ID room-temp vacuum hose VH20 1/2” ID room-temp vacuum hose JIC NPT • • • • • • $ 11.80 / ft. Max. temp: 1000°F (538°C) continuous 1000 psi external 100% stainless steel construction .375” ID x .630” OD Price includes 1/4” male NPT ends End fittings: NPT, JIC, BSPT VH24 SS hi-flex autoclave/oven vacuum hose $ 16.15 / ft. VH23 and VH24 have no outer braiding that can fray. The annulur corrugations provide good flexibility and prevent damage to molds and vacuum bags. VH24 has more corrugations per inch than the VH23 and is significantly more flexible. VH23 / VH24 optional ends $ 4.95 / ft. 5.60 / ft. 6.65 / ft. 3/8” male NPT 1/2” male NPT 1/4” fem JIC 3/8” fem JIC 1/2” fem JIC Price includes 1/4” male NPT fittings, straight or 90° elbows. For 3/8”, 1/2”, and non-NPT end fittings, add $2.00 per end. $8.10/end 9.40/end 16.20/end 16.95/end 19.20/end $30.15/end 46.00/end 71.60/end 16.40/end 29.15/end 39.05/end 90° elbow, 1/4” male NPT 90° elbow, 3/8” male NPT 90° elbow, 1/2” male NPT 1/4” fem NPT 3/8” fem NPT 1/2” fem NPT VACUUM PROBES 304114 STANDARD 1/4” 1/4-turn machined aluminum vacuum probe with round base, 1/4” male npt, wrench flats, non-pinch base design. Complete assembly includes top, base, and gasket. 2.38” dia. x 1.65” tall Complete assembly Top Base Gasket 304114 304000 000110 000004 304124 324114 RECT. BASE Complete assembly Top Base Gasket 2.38” dia. x 1.82” tall 324114 324000 000110 000004 334664 $ 30.90 21.70 8.80 2.50 1.24” x 3.50” x 1.61” tall 2.38” dia. x 1.90” tall 304334 $ 21.10 9.70 10.80 2.50 Complete assembly Top Base Gasket FILTERED 304334 304000 000330 000336 000004 000015 000016 $ 33.80 9.70 17.90 23.30 2.50 1.95 4.95 $ 63.45 43.80 19.80 2.50 364000 353444 353001 353002 353003 353004 2 $ 38.75 24.50 7.20 6.55 2.70 $ 24.45 14.35 9.50 2.75 ELASTOMERIC 1.50” dia. x 1.14” tall Complete assembly Gasket 374000 364000 360004 $ 10.40 2.40 THRU-TOOL Nickel-plated 1/4” male NPT steel port for installing through molds and plates from .25” to 1.13” thick. .55” diameter, 90° countersunk head, 2.50” long overall. Includes body, o-ring, washer, spring washer, & nut. Complete assembly 374000 377000 & 377832 2.74” dia. x 1.85” tall Complete assembly Body Knurled Nut Washer Gasket 308228 308000 000220 000008 Small footprint machined aluminum port for installing in elastomeric and plastic film vacuum bags. 1.25” hex body helps with fitting installation 4-PIECE Hard-anodized machined aluminum port, 1/4” male npt, wrench flats. Complete assembly includes body, nut, washer, and gasket. 2.74” dia. x 1.85” tall Complete assembly Top Base only Base with o-ring & filter Gasket O-ring, silicone Filter 334664 334000 000660 000004 353444 1/4-turn machined aluminum vacuum probe with filtered base, 1/4” male npt, wrench flats. Complete assembly includes top, base, filter, o-ring, and gasket. Complete assembly Top Base Gasket CINCH - STAINLESS Vacuum probe with rotating cam. Can be used without gasket for 1000°F use. Compound action applies higher pressure than 1/4 turn style. 1/4” male npt, wrench flats, non-pinch base design. 304124 304000 000120 000004 STANDARD 1/2” 1/4-turn machined aluminum vacuum probe with round base, 1/2” male npt, wrench flats, non-pinch base design. Complete assembly includes top, base, and gasket. 2.38” dia. x 1.90” tall $ 19.10 9.70 8.80 2.50 1/4-turn machined aluminum vacuum probe with rectangular base. Allows installation after sealing bag. 1/4” male npt, wrench flats, non-pinch base design. Complete assembly Top Base Gasket 308228 CINCH - ALUMINUM Vacuum probe with rotating cam for adapting to various material thicknesses. Compound action applies higher pressure than 1/4 turn style. 1/4” male npt, wrench flats, non-pinch base design. 1.50” dia. x .18” tall (fasteners included) $ 27.90 PORT COVER Stainless steel high-flow cover installs over holes in molds and tooling up to .57” in diameter. 377000 attaches with SS drive screws (no tapping required). 377832 attaches with SS 8-32 screws. Cover w/ Drive Screws 377000 Cover w/ 8-32 Screws 377832 $ 12.40 12.40 © 2013 TORR TECHNOLOGIES INC www.torrtech.com sales@torrtech.com PRICE LIST April 2013 TORR TECHNOLOGIES INC SILICONE RUBBER SHEET & EXTRUSION Maximum recommended use temperature (continuous): 400°F (204°C) HIGH-STRENGTH SHEETING SPECIFICATIONS Hardness (Shore A) Tensile strength (psi) Tear strength (ppi) Mod.@ 25% elong. (psi) Mod.@ 50% elong. (psi) Mod.@100% elong. (psi) Mod.@300% elong. (psi) Elongation at break (%) Specific gravity Compression set (%) (22 hrs @ 350°F) Color EL78 PRICING - CURED EL80 EL1037T EL1040T 30 1500 207 52 73 112 324 900 1.10 17 50 1400 250 79 120 181 464 894 1.15 21 35 1548 256 45 60 84 331 1149 1.13 8 40 1860 250 58 101 148 304 1300 1.11 16 gray gray trans. trans. Limited stock 36” wide max. Limited stock .030 .040 .063 .085 .125 QUANTITY INTERFLOW STRIP (807803 SHOWN) P/N 807803 807804 807806 807808 EXTRUSIONS - SILICONE 1.59 2.16 3.18 10.80 13.05 17.95 22.55 32.50 10.05 12.15 16.50 21.40 30.40 600+ 9.65 11.70 15.90 20.60 29.30 QUANTITY 30-49 sq.ft 50-99 100-199 200-599 600+ .76 $35.60/sq.ft 19.65 12.65 11.25 10.55 .030 1.02 36.30 22.30 15.50 13.80 13.00 .040 1.59 37.00 27.80 21.50 19.25 18.20 .063 47.05 35.35 27.15 25.15 23.90 .085* 2.16 66.70 49.70 39.00 35.45 33.45 .125* 3.18 * Typically stocked in limited quantities for immediate shipment. Uncured is interleaved with polyethylene and requires care when unrolling. Instructions are provided. Packaged in wood crate for protection. (EL80 & EL78, 36”, 48”, & 54” WIDE) 200-599 45.70 600+ 43.35 For use as a breather strip and to reduce stress on diaphragm when using T-7 seal Interflow™ Strip 1.02 $11.60/sq.ft 14.05 19.30 24.95 35.95 THICKNESS inches mm 1-99 sq.ft. 100-199 $53.85 /sq.ft. 49.10 INTERFLOW SHEET .76 1-99 sq.ft 100-199 200-599 PRICING - UNCURED (minimum order 30 sq.ft.) Patented high-strength silicone rubber sheeting with molded channels to create diaphragm with integral breathing. Interflow is commonly used in compaction tables and other applications where part markoff is not a concern. THICKNESS inches mm .125 3.18 QUANTITY THICKNESS inches mm • To order, please specify compound, thickness, width, & length • Stock widths: 36” 48” 54” 72” • No minimum order for stock material • Special compounds (unique color, modulus, hardness, etc) available • Orders for non-stock thicknesses, widths, and compounds typically require a minimum order of 50 lin.ft. • Seamed blankets available in any width. Seam charges are: .063”, .085”, .125”: $29.00/ft. .030, .040”, & Interflow™: $32.00/ft. • Torr fabricates large molded sheets & custom contoured diaphragms INTERFLOW™ USA (800)845-4424 INT’L (253)735-9115 FAX (253)735-0437 Prices shown are in US dollars Prices subject to change without notice 1435 22ND ST NW AUBURN WA 98001 $ 3.80 / ft. 4.90 / ft. 7.10 / ft. 9.20 / ft. .600” (3 squares wide) .800” (4 squares wide) 1.200” (6 squares wide) 1.600” (8 squares wide) COMMERCIAL GRADE SHEETING SOLID & SPONGE Commercial grade silicone rubber is used for a variety of applications such as caul pads, pressure intensifiers, shock absorption, gaskets, and items not requiring high tear and tensile strength. Please call for pricing. • Custom die cutting and perforating available. Width: 36” & 48” (limited stock) SOLID hardness (Shore A): 40, 50, & 60 SPONGE density: soft, medium, firm Color: red & gray (limited) SOLID finish: light fabric or smooth Reinforced solid available We have limited stock of tubing and shapes not shown here and we custom-extrude solid and hollow profiles RIGHT TRIANGLE (90°) FAIRING BAR 50 Duro (A) silicone ENVELOPE SEAL Triangle seal with insert SMALL SEAL .63” H. x .75” W. triangle MEDIUM SEAL .88” H. x .88” W. triangle LARGE SEAL 1.25” H. x 1.38” W. triangle 870000 870800 871000 871200 $ 7.90/ft. $30.00/ corner splice $ 5.60/ft. $26.00/ corner splice .10” min. compressed height $ 6.00/ft. $26.00/ corner splice .16” min. compressed height $ 10.90/ft. $28.00/ corner splice .26” min. compressed height .39” min. compressed height T-7 NANO SEAL .20” W. x .20” H. T-7 MICRO SEAL .38” W. x .38” H. T-7 STD SEAL .63” W. x .63” H. T-7 LARGE SEAL 1.00” W. x 1.00” H. 873000 874000 875000 876000 $ 3.40/ft. $ 5.90/ft. $ 7.20/ft. $ 9.10/ft. 872038 872050 872075 872100 .38” x .38” .50” x .50” .75” x .75” 1.00” x 1.00” $ 3.10/ft. $ 3.45/ft. $ 5.10/ft. $ 6.60/ft. SQUARE PROFILES 50 Duro (A) silicone (call for available rectangle profiles) 877038 877050 877075 877100 .38” x .38” .50” x .50” .75” x .75” 1.00” x 1.00” $ 3.15/ft. $ 4.10/ft. $ 7.40/ft. $ 10.70/ft. VACUUM PUMPS, GAUGES, MANIFOLDS DIAPHRAGM VACUUM PUMP • 25.5” Hg, 1.3 CFM free-flow • 1/8 hp, 120 VAC This extremely quiet, oil-free pump includes handle, feet, gauge, and sidemounted switch. 501120 $ 510.00 ROTARY VANE VACUUM PUMP • 29.91” Hg, oil-flooded • 1/2 hp, 120 VAC, 5 CFM, quiet Includes 10’ cord, on/off switch, exhaust filter/muffler, 3/8” and 1/4” female NPT connections. Gauge option shown 502150 vacuum pump 502F filter option 502G gauge option 502M manifold option 18” hose & 4-port manifold $ 588.00 132.00 52.00 67.00 51XXXX TM SERIES INDUSTRIAL ROTARY VANE VACUUM PUMP SYSTEMS Vacuum levels to 29.9” Hg .6 to 25 hp 7 to 918 ACFM 120 to 480 VAC 1 & 3 phase DIN motor starter High-flow polyester or carbon filter Adjustable vacuum switch 20 to 250 gal horizontal or 80 gal vertical tanks Please call for pricing 3 VACUUM GAUGES 8990471 VENTURI VACUUM PUMPS 27.1” Hg ultimate vacuum All-pneumatic operation, no electricity required Operates on 50 psi compressed air Makes an excellent back-up pump Includes 4-port manifold, filter, vacuum gauge, on-off-auto switch, adjustable vacuum switch, and filter-regulator for incoming air. MODEL AIR USE (cfm) FLOW @ 0” Hg TM25 TM50 TM100 4.0 8.0 16 13 22 32 PRICE • 2.5” dia. • Plastic case • Dry $ 22.70 9767002 • 2.5” dia. • SS case, wet • high accuracy $ 26.20 MANIFOLDS • Anodized aluminum • 3/8” npt end ports, 1/4” npt side ports • 1.5” between ports $ 1496.00 4-PORT 1610.00 6-PORT 1859.00 8-PORT MM-210 MM-320 MM-420 $ 27.50 31.80 35.65 © 2013 TORR TECHNOLOGIES INC www.torrtech.com sales@torrtech.com PRICE LIST April 2013 TORR TECHNOLOGIES INC USA (800)845-4424 INT’L (253)735-9115 FAX (253)735-0437 Prices shown are in US dollars Prices subject to change without notice 1435 22ND ST NW AUBURN WA 98001 VACUUM BAGGING TOOL COMPONENTS GAS SPRINGS, GAS-SPRING HARDWARE RC1 885605 885602 AC86090 (90 LB) 88180J 88080J 88083J Type J and type K thermocouple jack, molded high-strength silicone rubber. Thru-tool type J plug assembly. Panel type J jack. Installs in .875 dia. hole. Type J standard male plug, hollow pin. Type J standard female jack. Silicone-insulated type J tc wire, 24 gauge, vacuum-tight, .105” dia., bondable. 88086J 885604 885601 Gas-spring, 380°F, 11” compressed, 17” extended. Last 3 digits indicate force (pounds). Gas-spring, 380°F, 17.8” compressed, 27.8” extended. Last 3 digits indicate force (pounds). Gas-spring lock for AC86, 380°F rated Ball stud for AC86, 5/16-18 thread Ball stud for AC10, 5/16-18 thread Retaining clip for AC86 Retaining clip for AC10 Weld-on ball stud doubler (call for size req’d) Bolt-on ball stud plate Base bracket, aluminum, 2” ball height Base bracket, steel, 1.5” ball height Base bracket, steel, .75” ball height THERMOCOUPLE HARDWARE * 88058J 88058K 860086 BS1 88087J 88058J $ 49.90 88058K 49.90 88080J 47.65 88083J 6.30 88086J 5.10 88087J 6.20 88180J 3.10/ft. 885522 AC86xxx $ 26.30 AC10xxx 39.10 860086 BS1 BS2 RC1 RC2 885604 885605 885601 885602 885522 87.00 2.30 2.50 .90 1.10 13.40 45.00 34.00 34.00 34.00 HANDLES, SWING CLAMPS * All components rated for 400°F continuous ADHESIVE & PRIMER RTV silicone adhesive, 2.8 oz tube RTV silicone adhesive, 10.1 oz cartridge 1200 Primer, 1 oz * 883203 883210 883501 883203 $ 8.90 883210 14.40 883501 23.80 886205 885500 886200 886200 Handle, aluminum. Mounts with 1/4-20 skt hd screws (included), 5.20” spacing. Swing clamp, stainless steel. Clamps to underside or surface (see 886205 Keeper below) of plate, mold, tooling. 10-32 screws included. Contact Torr to determine correct grip length. Keeper, surface mount. 1/4-20 screws included. One ounce bottles of 1200 Primer are offered as a convenience to our customers. Larger containers available through Dow Corning distributors. *(no hazmat charges if shipped via UPS ground or air) 885500 $ 19.80 886200 62.00 886205 11.35 VACUUM PORT HARDWARE FRAME DETENTS PRSN-500 884100 884200 Frame Mount Vacuum Port Assembly 884100 $ 59.25 - Includes SS flex hose, VP36 probe, brass connectors, bulkhead fitting, frame bracket, and fasteners. Does not include vacuum release valve. Frame Mount Vacuum Port Assembly w/ Valve 884200 68.70 - Includes items above plus high-temp vacuum release valve. 884040 $ 16.50 884060 $ 8.90 Aluminum bracket and 1/4” 1/4” npt vacuum release npt brass bulk-head fitting ball valve, rated to 380°F. 88710R/L 88710R 88710L $ 86.80 86.80 Frame detent assembly (right or left). Includes bracket, pin, pull tag, frame-mount wedge, and fasteners. PRSN-500 44.75 Replacement pin LEAK DETECTORS 890000 892000 884106 $ 26.10 1/4” npt x 6” long stainless steel jumper hose HINGES T-7 hinge, laser cut and formed for use with Torr’s T-7 standard seal (875000). Nickel-plated steel. Includes weld-on aluminum spacer block 88501R and mounting hardware. Available in 3 versions: Standard, Short Travel, or Fixed-Pivot. Custom versions available. Frame detents help prevent accidental closure of tools. They are typically used with T-7 hinges alone, or with gas-spring cylinders as an added safety device. Please specify right- or lefthand when ordering. Ultrasonic Leak Detector Kit - includes detector 890000 $ 947.00 with built-in speaker and meter, hand-held probe, headphones, concentrator, and case. High Freq. Generator Spark Tester Kit - includes 892000 560.00 spark tester, fan tip, and case Heavy Duty High Freq. Generator Spark Tester 892000HD 625.00 Kit - includes spark tester, fan tip, and case Standard, Right 88501R $ 54.20 Standard, Left 88501L 54.20 Short, Right Short, Left 88503R 88503L 54.20 54.20 Fixed, Right Fixed, Left 88502R 88502L 54.20 54.20 Replacement fan tip for 892000 8” brass brush tip for 892000 For tools with odd-number of hinges, use one more right-hand hinge than left-hand 4 892010 892030 56.00 129.20 © 2013 TORR TECHNOLOGIES INC