Wired Microphones
PG
SM
Beta
KSM
PG Wired Microphones
The entry to Shure
PG Microphones are the entry point to professional Shure quality, ruggedness and sound. With a
wide selection of vocal, instrument and drum microphones, including XLR and USB side-address
condenser models, PG Microphones are ideal for rehearsal, performing and recording.
APPLICATIONS
Live Performance
Recording
General Sound
Reinforcement
PRODUCT HIGHLIGHTS
Affordable, professionalcaliber sound and quality
Vocal, instrument, and
drum-specific models
Dynamic and condenser
models
USB connectivity
PG27 Side Address Condenser Microphone
Overview
The PG27 is the entry to Shure side-address condenser microphones. Designed with a flat frequency response, the PG27 naturally reproduces a wide
variety of acoustic, amplified and vocal sound sources.
Features
•
•
•
•
Large diaphragm capsule provides wide dynamic range for clear highs and strong lows
Flat, neutral frequency response for natural reproduction
High SPL handling of acoustic, amplified and vocal sound sources
-20 dB switchable attenuator for additional SPL versatility
Available Models
PG27-LC
Includes a stand adapter and a zippered pouch
Specifications
Frequency Response
Microphone Type
Polar Pattern
Sensitivity
(at 1 kHz, open circuit voltage)
Max SPL
(20 Hz – 20 kHz, <1% THD)
Equivalent Self-Noise
Polarity
Output Impedance (at 1000 Hz)
Switch
Power Requirements
Connector
Environmental Conditions
Weight
Polar Pattern
Measured at 1000 Hz
www.shure.com
20 Hz – 20 kHz
Condenser
Cardioid
-41 dBV/Pa (8,8 mV)
1 Pascal = 94 dB SPL
PAD OFF: 134 dB SPL
PAD ON: 154 dB SPL
20 dB(A)
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
300 Ω
Attenuator: -20 dB
48 Vdc phantom, 10 mA
Three-pin professional audio connector (male XLR type)
This microphone operates over a temperature range of -29 to 57 °C and at a relative humidity of 0 to 95%
Net:
435 g
Packaged: 1400 g
PG27
Frequency Response
Wired Microphones | PG
PG27USB Side Address Condenser Microphone
Overview
The PG27USB Side-Address Condenser Microphone easily plugs into a computer USB port for the convenience of digital recording. Designed with a flat
frequency response, the PG27USB naturally reproduces a wide variety of acoustic, amplified and vocal sound sources.
Features
•
•
•
•
•
•
•
•
•
•
USB Plug and Play connectivity
Zero Latency Monitoring for real-time playback and multi-tracking without disorientation
Monitor Mix Control for blending microphone and playback audio
Integrated pre-amp with Microphone Gain Control allows control of input signal strength
Compatible with Windows Vista, XP, 2000, and Mac OS X (10.1 or later)
Headphone jack for monitoring with 3.5 mm (1/8”) connectivity
Large diaphragm capsule provides wide dynamic range for clear highs and strong lows
High SPL handling of acoustic, amplified and vocal sound sources
Flat, neutral frequency response for natural reproduction
-20 dB switchable attenuator for additional SPL versatility
Available Models
PG27-USB
Includes a 3 m USB cable, stand adapter and a zippered pouch
Specifications
Frequency Response
Microphone Type
Polar Pattern
Sensitivity (at 1000 Hz)
Max SPL
(20 Hz − 20 kHz, <1% THD)
Switch
Power Requirements
Digital Noise Floor
(20 Hz − 20 kHz, A-weighted)
Sampling Rate
Bit Depth
Peak Signal Indicator
(Tri-color)
Adjustable Gain Range
Headphone Output
Connector
Environmental Conditions
Weight
Polar Pattern
Measured at 1000 Hz
Wired Microphones | PG
20 Hz − 20 kHz
Condenser
Cardioid
-33 dBFS/Pa (at minimum gain)
PAD OFF: 124 dB SPL
PAD ON: 144 dB SPL
Attenuator: -20 dB
USB-powered (USB 1.1 or 2.0 with 500 mA of current supply)
Minimum MIC GAIN setting: -81 dBFS
Maximum MIC GAIN setting: -78 dBFS
(0 dBFS = 0 dBV, corresponding to MaxSPL at Minimum Mic gain setting)
Up to 48 kHz
16 bit
Off:
-30 dBFS
Green: -30 to -12 dBFS
Yellow: -12 to 0 dBFS
Red:
>0 (digital converter clipped)
34 dB
3.5 mm
USB
This microphone operates over a temperature range of -29 to 57 °C and at a relative humidity of 0 to 95%
Net:
453 g
Packaged: 1500 g
PG27USB
Frequency Response
www.shure.com
PG42 Side Address Condenser Microphone
Overview
Specifically engineered for vocal reproduction, the PG42 Side-Address Condenser Mmicrophone features a large cardioid diaphragm tailored with high
sensitivity to clearly reproduce the subtle nuances of lead vocal performances.
Features
•
•
•
•
•
•
Large diaphragm capsule with high sensitivity
Voice-tailored frequency response specifically engineered to reproduce the subtle nuances of lead vocal performances
High-pass filter for additional control of unwanted low-end signal
-15 dB switchable attenuator for additional SPL versatility
Shock mount included for additional set-up stability
Carrying case included for additional protection during storage or transport
Available Models
PG42-LC
Includes a shock mount and a carrying case
Specifications
Frequency Response
Microphone Type
Polar Pattern
Sensitivity
(at 1 kHz, open circuit voltage)
Max SPL
(20 Hz − 20 kHz, <1% THD)
Equivalent Self-Noise
Polarity
Output Impedance (at 1000 Hz)
Switch
Power Requirements
Connector
Environmental Conditions
Weight
Polar Pattern
Measured at 1000 Hz
www.shure.com
20 Hz − 20 kHz
Condenser
Cardioid
-35 dBV/Pa (17,8 mV)
1 Pascal = 94 dB SPL
PAD OFF: 130 dB SPL
PAD ON: 145 dB SPL
15 dB(A)
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
300 Ω
Attenuator: 15 dB
48 Vdc phantom, 10 mA
Three-pin professional audio connector (male XLR type)
This microphone operates over a temperature range of -29 to 57 °C and at a relative humidity of 0 to 95%
Net:
436 g
Packaged: 2400 g
PG42
Frequency Response
Wired Microphones | PG
PG42USB Side Address Condenser Microphone
Overview
Specifically engineered for vocal reproduction, the PG42USB Side-Address Condenser Microphone easily plugs into a computer USB port for the
convenience of digital recording. The PG42USB features a large cardioid diaphragm tailored with high sensitivity to clearly reproduce the subtle nuances
of lead vocal performances.
Features
•
•
•
•
•
•
•
•
•
•
•
•
USB Plug and Play connectivity allows the convenience of digital recording
Zero Latency Monitoring for real-time playback and multi-tracking without disorientation
Monitor Mix Control for blending microphone and playback audio Compatible with Windows Vista, XP, 2000, and Mac OS X (10.1 or later)
Integrated pre-amp with Microphone Gain Control allows control of input signal strength
Compatible with Windows Vista, XP, 2000, and Mac OS X (10.1 or later)
Headphone jack for monitoring with 3.5 mm (1/8”) connectivity
Large diaphragm capsule provides wider dynamic range for clear highs and strong lows
Voice-tailored frequency response specifically engineered to reproduce the subtle nuances of lead vocal performances
High-pass filter for additional control of unwanted low-end signal
-15 dB switchable attenuator for additional SPL versatility
Shock mount included for additional set-up stability
Carrying case included for additional protection during storage or transport
Available Models
PG42-USB
Includes a 3 m USB cable, shock mount and a carrying case
Specifications
Frequency Response
Microphone Type
Polar Pattern
Max SPL
(20 Hz − 20 kHz, <1% THD)
Switch
Power Requirements
Digital Noise Floor
(20 Hz − 20 kHz, A-weighted)
Sampling Rate
Bit Depth
Peak Signal Indicator
(Tri-color)
Adjustable Gain Range
Headphone Output
Connector
Environmental Conditions
Weight
Polar Pattern
Measured at 1000 Hz
Wired Microphones | PG
20 Hz − 20 kHz
Condenser
Cardioid
PAD OFF: 120 dB SPL
PAD ON: 135 dB SPL
Max SPL corresponds to full-scale digital output at minimum analog gain setting
Attenuator: -15 dB
USB-powered (USB 1.1 or 2.0 with 500 mA of current supply)
Minimum MIC GAIN setting: −81 dBFS
Maximum MIC GAIN setting: −78 dBFS
(0 dBFS = 0 dBV, corresponding to MaxSPL at Minimum Mic gain setting)
Up to 48 kHz
16 bit
Off:
-30 dBFS
Green: -30 to -12 dBFS
Yellow: -12 to 0 dBFS
Red: >0 (digital converter clipped)
34 dB
3.5 mm
USB
This microphone operates over a temperature range of -29 to 57 °C and at a relative humidity of 0 to 95%
Net:
457 g
Packaged: 2500 g
PG42USB
Frequency Response
www.shure.com
PG48 Cardioid Dynamic Vocal Microphone
Overview
The PG48 Dynamic Vocal Microphone is a professional quality microphone designed to be used for spoken word and karaoke performance applications.
With rugged durability and excellent sound, the PG48 comes with an on/off switch, swivel adapter, carrying pouch and choice of XLR or QTR ( ¼”) cable.
Features
•
•
•
•
•
•
Tailored frequency response tuned specifically for spoken word and karaoke applications
Cardioid polar pattern
Handles extreme volume levels without distortion
Durable metal construction.
On/off switch for onstage control
Steel mesh ball grille with integral pop filter reduces explosive breath sounds and wind noise and resist wear and abuse
Available Models
PG48-QTR-B
Includes a 4.5 m XLR to 1/4“ cable, microphone clip, 5/8“ to 3/8“ threaded adapter, and a storage bag
PG48-XLR-B
Includes a 4.5 m XLR to XLR cable, microphone clip, 5/8“ to 3/8“ threaded adapter, and a storage bag
Specifications
Microphone Type
Polar Pattern
Frequency Response
Polarity
Output Impedance (at 1000 Hz)
Sensitivity (at 1000 Hz)
Connector
Switch
Environmental Conditions
Case
Weight
Polar Pattern
Measured at 1000 Hz
PG48
Dynamic (moving coil)
Cardioid (unidirectional)
70 Hz – 15 kHz
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
600 Ω
-52 dBV/Pa, (2.5 mV), 1 Pascal = 94 dB SPL
Three-pin professional audio connector (male XLR type)
Built-in on/off switch
This microphone operates over a temperature range of -29 to 57 °C and at a relative humidity of 0 to 95%
Die cast metal handle, black matte finish; hardened silver colored, spherical steel mesh grille
Net:
314 g
Packaged: 890 g
Frequency Response
1000 Hz
www.shure.com
Wired Microphones | PG
PG52 Cardioid Dynamic Kick Drum Microphone
Overview
The PG52 Dynamic Kick Drum Microphone is a professional quality microphone designed to be used in kick drum and other low frequency applications.
With rugged durability and excellent sound, the PG52 features a swivel joint for ease of placement, carrying pouch and a XLR cable.
Features
•
•
•
•
•
•
•
•
•
Tailored frequency response tuned specifically for kick drum applications
Cardioid polar pattern
Handles extreme volume levels without distortion
Cartridge includes a neodymium magnet for high output level
Internal shock mount for reduced handling noise
Durable metal construction
Integral stand mount
Steel mesh tapered grille that resists wear and abuse
Includes 4.5 m cable and storage bag
PG52
Available Models
PG52-XLR
Includes an integrated stand mount, 4.5 m XLR to XLR cable, 5/8“ to 3/8“ thread adapter, and a storage bag
Specifications
Microphone Type
Polar Pattern
Frequency Response
Polarity
Output Impedance (at 1000 Hz)
Sensitivity (at 1000 Hz)
Connector
Case
Environmental Conditions
Weight
Polar Pattern
Measured at 1000 Hz
Dynamic (moving coil)
Cardioid (unidirectional)
30 Hz – 13 kHz
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
300 Ω
-55 dBV/Pa (1.8 mV), 1 Pascal = 94 dB SPL
Three-pin professional audio connector (male XLR type)
Die cast metal housing, black matte finish; hardened silver colored, tapered steel mesh grille; built-in locking stand
adapter
This microphone operates over a temperature range of -29 to 57 °C and at a relative humidity of 0 to 95%
Net:
470 g
Packaged: 1053 g
Frequency Response
1000 Hz
Wired Microphones | PG
www.shure.com
PG56 Cardioid Dynamic Snare/Tom Microphone
Overview
The PG56 Dynamic Snare/Tom Microphone is a professional quality microphone designed to be used in close-mic drum and percussion applications. With
rugged durability and excellent sound, the PG56 features a swivel joint for ease of placement, carrying pouch and a XLR cable.
Features
•
•
•
•
•
•
•
•
•
Tailored frequency response tuned specifically for drum applications
Cardioid polar pattern
Handles extreme volume levels without distortion
Cartridge includes a neodymium magnet for high output level
Internal shock mount for reduced handling noise
Durable metal construction
Integral stand mount
Hardened steel mesh tapered grille that resists wear and abuse
Includes 4.5 m cable, A50D drum mount and storage bag
PG56
Available Models
PG56-XLR
Includes an integrated stand mount, 4.5 m XLR to XLR cable, 5/8“ to 3/8“ thread adapter, and a storage bag
Specifications
Microphone Type
Polar Pattern
Frequency Response
Polarity
Output Impedance (at 1000 Hz)
Sensitivity (at 1000 Hz)
Connector
Case
Environmental Conditions
Weight
Polar Pattern
Measured at 1000 Hz
Dynamic (moving coil)
Cardioid (unidirectional)
50 Hz – 15 kHz
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
200 Ω
-56 dBV/Pa (1.6 mV), 1 Pascal = 94 dB SPL
Three-pin professional audio connector (male XLR type)
Die cast metal housing, black matte finish; hardened silver colored, tapered steel mesh grille; built-in locking stand
adapter
This microphone operates over a temperature range of -29 to 57 °C and at a relative humidity of 0 to 95%
Net:
323 g
Packaged: 935 g
Frequency Response
1000 Hz
www.shure.com
Wired Microphones | PG
PG57 Cardioid Dynamic Instrument Microphone
Overview
PG57 Dynamic Instrument Microphone is a professional quality microphone designed to be used in a wide variety of amplified and acoustic instrument
applications. With rugged durability and excellent sound, this versatile microphone comes with an on/off switch, swivel adapter, carrying pouch and a
XLR cable.
Features
•
•
•
•
•
•
•
•
•
Tailored frequency response tuned specifically for instrument applications
Cardioid polar pattern
Handles extreme volume levels without distortion
Cartridge includes a neodymium magnet for high output level
Internal shock mount for reduced handling noise
Durable metal construction
On/off switch for onstage control
Hardened steel mesh tapered grille that resists wear and abuse
Includes a 4.5 m cable, break-resistant mic clip and storage bag
Available Models
PG57-XLR
Includes a 4.5 m XLR to XLR cable, microphone clip, 5/8“ to 3/8“ thread adapter, and a storage bag
Specifications
Microphone Type
Polar Pattern
Frequency Response
Polarity
Output Impedance (at 1000 Hz)
Sensitivity (at 1000 Hz)
Switch
Connector
Case
Environmental Conditions
Weight
Polar Pattern
Measured at 1000 Hz
PG57
Dynamic (moving coil)
Cardioid (unidirectional)
50 Hz –15 kHz
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
200 Ω
-56 dBV/Pa (1.6 mV), 1 Pascal = 94 dB SPL
Built-in on/off switch
Three-pin professional audio connector (male XLR type)
Die cast metal handle, black matte finish; hardened silver colored, tapered steel mesh grille
This microphone operates over a temperature range of -29 to 57 °C and at a relative humidity of 0 to 95%
Net:
324 g
Packaged: 908 g
Frequency Response
1000 Hz
Wired Microphones | PG
www.shure.com
PG58 Cardioid Dynamic Vocal Microphone
Overview
The PG58 Dynamic Vocal Microphone is a professional quality microphone designed to be used in lead and backup vocal performance applications.
With rugged durability and excellent sound, the PG58 comes with an on/off switch, swivel adapter, carrying pouch and a XLR or QTR ( ¼”) cable.
Features
•
•
•
•
•
•
•
•
•
•
Tailored frequency response tuned specifically for vocal applications
Cardioid polar pattern picks
Handles extreme volume levels without distortion
Cartridge includes a neodymium magnet for high output level
Internal shock mount for reduced handling noise
Durable metal construction
On/off switch for onstage control
Hardened steel mesh ball grille that resists wear and abuse
Integral “pop” filter reduces explosive breath sounds and wind noise
Includes 4.5 m cable, break-resistant mic clip and storage bag
Available Models
PG58-QTR-B
Includes a 4.5 m XLR to 1/4“ cable, microphone clip, 5/8“ to 3/8“ thread adapter, and a storage bag
PG58-XLR-B
Includes a 4.5 m XLR to XLR cable, microphone clip, 5/8“ to 3/8“ thread adapter, and a storage bag
PG58
Specifications
Microphone Type
Polar Pattern
Frequency Response
Polarity
Output Impedance (at 1000 Hz)
Dynamic (moving coil)
Cardioid (unidirectional)
60 Hz – 15 kHz
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
300 Ω
Sensitivity (at 1000 Hz)
Switch
Connector
Case
Environmental Conditions
Weight
-53 dBV/Pa (2.2 mV), 1 Pascal = 94 dB SPL
Built-in on/off switch
Three-pin professional audio connector (male XLR type)
Die cast metal handle, black matte finish; hardened silver colored, spherical steel mesh grille
This microphone operates over a temperature range of -29 to 57 °C, and at a relative humidity of 0 to 95%
Net:
321 g
Packaged: 908 g
Polar Pattern
Measured at 1000 Hz
Frequency Response
1000 Hz
www.shure.com
Wired Microphones | PG
PG81 Cardioid Condenser Instrument Microphone
Overview
PG81 Condenser Instrument Microphone is a professional quality flat-response microphone designed to be used in sensitive acoustic instrument
applications. With rugged durability and excellent sound, this versatile microphone comes with an on/off switch, swivel adapter, carrying pouch and a
XLR cable. Phantom power or included AA battery required.
Features
•
•
•
•
•
•
•
Flat frequency response is wide and uniform. Consistent sensitivity through frequency range.
Cardioid polar pattern
Condenser cartridge has a lightweight, sensitive diaphragm. Captures sound nuances precisely and smoothly..
Powered by AA battery or phantom power supply.
Internal shock mount for reduced handling noise.
Durable metal construction.
On/off switch for onstage control.
Available Models
PG81-XLR
Includes a 4.5 m XLR to XLR cable, microphone clip, 5/8“ to 3/8“ thread adapter, and a storage bag
Specifications
Microphone Type
Polar Pattern
Frequency Response
Polarity
Output Impedance (at 1000 Hz)
Sensitivity (at 1000 Hz)
Output Clipping Level
(1 kHz, 1 % THD, 2000 Ω load)
Maximum SPL (2000 Ω load)
Condenser (electret bias)
Cardioid (unidirectional)
40 Hz – 18 kHz
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
600 Ω
-48 dBV/Pa (4.0 mV), 1 Pascal = 94 dB SPL
-13 dBV (0.22 V) (phantom)
-17 dBV (0.14 V) (battery)
131 dB (phantom)
127 dB (battery)
Self-Noise (Equivalent SPL)
Dynamic Range (maximum SPL,
2 kΩ load, to A-weighted noise level)
20 dB typical, A-weighted
111 dB (phantom)
107 dB (battery)
Power Requirements
Supply Voltage: 11 – 52 Vdc
Current Drain: 2.0 mA max at 52 Vdc
1.5 V alkaline AA size
Life: up to 10,000 hours
Battery Power
Switch
Case
Environmental Conditions
Built-in on/off switch
Steel and brass construction with black painted finish
This microphone operates over a temperature range of -29 to 57 °C, and at a relative humidity of 0 to 95%
Weight
Net:
250 g (less battery)
Packaged: 880 g
Polar Pattern
Measured at 1000 Hz
PG81
Frequency Response
1000 Hz
Wired Microphones | PG
www.shure.com
PGDMK4XLR Drum Microphone Kit
Overview
The PGDMK4 Drum Microphone Kit is an essential package of professional quality microphones, designed to provide excellent sound for close-mic kick
drum, snare and tom applications. Included in the PGDMK4 are one PG52 and three PG56 microphones, along with three A50D drum mounts, four
XLR-XLR cables, and a carrying case.
Features
•
•
•
•
•
3
1
3
4
1
x
x
x
x
x
PG56 microphones
PG52 microphone
A50D drum mounts
4.5 m XLR-XLR cables
carrying case
Available Models
PGDMK4
Includes three PG56 snare/tom microphones, one PG52 kick drum microphone, three A50D drum mounts,
four 4.5 m XLR-XLR cables and a durable carrying case
PGDMK4XLR
PGDMK6XLR Drum Microphone Kit
Overview
The PGDMK6XLR Drum Microphone Kit is a complete package of professional quality microphones, assembled to provide excellent sound for close-mic,
full drum kit applications. Included in the PGDMK4 are one PG52, three PG56 and two PG81 microphones, along with three A50D drum mounts, six
XLR-XLR cables, and a carrying case.
Features
•
•
•
•
•
•
3
1
2
3
6
1
x
x
x
x
x
x
PG56 microphones
PG52 microphone
PG81 microphones
A50D drum mounts
4.5 m XLR-XLR cables
carrying case
Available Models
PGDMK6XLR
www.shure.com
Includes three PG56 snare/tom microphones, one PG52 kick drum microphone, two PG81 instrument microphones,
three A50D drum mounts, six 4.5 m XLR-XLR cables and a durable carrying case
United States:
Shure Incorporated
5800 West Touhy Avenue
Niles, IL 60714-4608 USA
Europe, Middle East, Africa:
Shure Europe GmbH
Wannenäckerstr. 28,
74078 Heilbronn, Germany
Phone: 847-600-2000
Fax: 847-600-1212
Email: info@shure.com
Phone: 49-7131-72140
Fax: 49-7131-721414
Email: info@shure.de
©2008 Shure Incorporated
AL1659SE
PGDMK6XLR
Asia, Pacific:
Shure Asia Limited
3/F, Citicorp Centre
18 Whitfield Road
Causeway Bay, Hong Kong
Canada, Latin America,
Caribbean:
Shure Incorporated
5800 West Touhy Avenue
Niles, IL 60714-4608 USA
Phone: 852-2893-4290
Fax: 852-2893-4055
Email: info@shure.com.hk
Phone: 847-600-2000
Fax: 847-600-6446
Email: international@shure.com