LED Dimming Driver
Hi-lume® LED
Architectural Dimming
Hi-lume LED
1 12.11.09
Hi-lume LED Overview
Hi-lume LED is a high-performance, constant current
driver that provides energy-efficient dimming for LED
lighting. With industry-leading full-range 100% to 1%
dimming, Hi-lume LED provides the ideal functionality
for any lighting application.
Features
• Continuous, flicker-free dimming from 100% to 1%.
• Standard 3-wire line-voltage phase-control
technology for consistent dimming performance
and compatibility with all Lutron 3-wire fluorescent
dimmers.
• EcoSystem® Bus control, compatible with all Lutron
EcoSystem, GRAFIK Eye® QSE and Quantum®
systems.
• Turns on to any dimmed level without flashing to
full brightness.
•L
ow harmonic distortion throughout the entire
dimming range maintains power quality.
•P
rotected from miswires of any input power to
control lead, or from lamp leads to each other
and/or ground.
• A rated lifetime of 50,000 hours.
• Instant light output at any level when turned on.
• UL recognized - for United States and Canada.
• For approved fixtures please go to:
www.lutron.com/HilumeLED/fixtures
®
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Hi-lume LED, case type A
3.00 in (76 mm) W x 1.00 in (25 mm) H x
4.90 in (124 mm) L
Page
1
LED Dimming Driver
Hi-lume® LED
Architectural Dimming
Hi-lume LED
Specifications
Performance
• Dimming Range: 100% to 1% measured
relative light output (RLO)
• Relative Humidity: maximum 90% non-condensing
• Operating Voltage: 120/277 V at 50/60 Hz
• Power Factor: greater than .90 at 25 W
• Total Harmonic Distortion (THD): less than 20% at
25 W
• Inrush Current < 2 A
• Sound Rating: Inaudible in a 24 dB ambient
• A rated lifetime of 50,000 hours - maximum case
temperature: 73 ºC
2 12.11.09
Standards
• Class P thermally protected
• Meets FCC Part 15 Non-Consumer requirements
for EMI/RFI emissions in a typical grounded fixture
• Manufacturing facilities employ ESD reduction
practices that comply with the requirements of
ANSI/ESD S20.20
• Lutron Quality Systems registered to ISO
9001.2000
• UL 8750 recognized
• cUL recognized for use in Canada
• Class 2 output
Driver Wiring & Mounting
• Driver is grounded by a mounting screw or by
terminal connection to the grounded fixture
• Terminal blocks on the driver accept one 18 AWG
or 16 AWG solid wire per terminal
• Fixture must be grounded in accordance with local
and national electrical codes
®
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page
2
LED Dimming Driver
Hi-lume® LED
Architectural Dimming
Hi-lume LED
3 12.11.09
0.70 Amp Driver
L3D25070AUNV1S*
Electrical Ratings (Typical)**
Model
Input Line
Voltage
Input Line
Current
Input
Frequency
Output
Voltage
Output
Current
Output
Power
Class 2
L3D25070AUNV1S
120/277 V
0.27/0.13 A
50/60 Hz
10-36 V
0.70 A + 5%
7-25 W
Yes
Output Voltage vs. Output Current
Power Factor vs. Output Power
36
1.0
120 V
34
0.9
0.8
30
26
120 V
24
277 V
22
20
18
277 V
0.7
0.6
Power Factor
Power Factor
28
Output Voltage (volts)
Output Voltage (volts)
32
0.5
0.4
0.3
16
0.2
14
0.1
12
10
0.0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
7
8
9
10
11
12
Output Current (Amps)
13
14
15
16
17
18
19
20
21
22
23
24
25
Output Power (Watts)
Output Current (Amps)
Output Power (Watts)
THD vs. Output Power
Efficiency vs. Output Power
30
100
90
25
277 V
80
Efficiency (%)
120 V
Efficiency (%)
THD (%)
THD (%)
20
120 V
15
10
70
277 V
60
50
40
30
20
5
10
0
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Output Power (Watts)
Output Power (Watts)
25
0
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Output Power (Watts)
Output Power (Watts)
* The “S” at the end of the ballast number indicates a studded option. Remove the “S” for a non-studded driver.
** At full light output.
®
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page
3
25
LED Dimming Driver
Hi-lume® LED
Architectural Dimming
Hi-lume LED
4 12.11.09
1.05 Amp Driver
L3D25105AUNV1S*
Electrical Ratings (Typical)**
Model
Input Line
Voltage
Input Line
Current
Input
Frequency
Output
Voltage
Output
Current
Output
Power
Class 2
L3D25105AUNV1S
120/277 V
0.27/0.13 A
50/60 Hz
7-24 V
1.05 A + 5%
7-25 W
Yes
Output Voltage vs. Output Current
Power Factor vs. Output Power
24
1.0
23
120 V
0.9
22
21
Output Voltage (volts)
0.8
20
277 V
19
Output Voltage (volts)
17
16
120 V
15
277 V
14
13
12
0.6
Power Factor
Power Factor
0.7
18
0.5
0.4
0.3
11
0.2
10
9
0.1
8
0.0
7
0.0
0.2
0.4
0.6
0.8
1.0
7
1.2
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Output Power (Watts)
Output Current (Amps)
Output Power (Watts)
Output Current (Amps)
THD vs. Output Power
Efficiency vs. Output Power
30
100
90
25
80
277 V
120 V
70
15
120 V
10
277 V
60
Efficiency (%)
Efficiency (%)
THD (%)
THD (%)
20
50
40
30
20
5
10
0
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
0
7
Output Power (Watts)
Output Power (Watts)
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Output Power (Watts)
Output Power (Watts)
* The “S” at the end of the ballast number indicates a studded option. Remove the “S” for a non-studded driver.
** At full light output.
®
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page
4
25
LED Dimming Driver
Hi-lume® LED
Architectural Dimming
Hi-lume LED
5 12.11.09
1.40 Amp Driver
L3D25140AUNV1S*
Electrical Ratings (Typical)**
Model
Input Line
Voltage
Input Line
Current
Input
Frequency
Output
Voltage
Output
Current
Output
Power
Class 2
L3D25140AUNV1S
120/277 V
0.27/0.13 A
50/60 Hz
7-18 V
1.40 A + 5%
10-25 W
Yes
Output Voltage vs. Output Current
Power Factor vs. Output Power
18
1.0
120 V
17
0.9
277 V
0.8
15
14
13
120 V
12
277 V
11
10
0.6
Power Factor
Power Factor
0.7
Output Voltage (volts)
Output Voltage (volts)
16
0.5
0.4
0.3
0.2
9
0.1
8
0.0
7
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
10
1.6
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Output Power (Watts)
Output Current (Amps)
Output Power (Watts)
Output Current (Amps)
THD vs. Output Power
Efficiency vs. Output Power
100
30
90
25
80
120 V
THD (%)
THD (%)
277 V
15
120 V
10
277 V
60
Efficiency (%)
Efficiency (%)
70
20
50
40
30
20
5
10
0
0
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Output Power (Watts)
Output Power (Watts)
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Output Power (Watts)
Output Power (Watts)
* The “S” at the end of the ballast number indicates a studded option. Remove the “S” for a non-studded driver.
** At full light output.
®
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page
5
LED Dimming Driver
Hi-lume® LED
Architectural Dimming
Hi-lume LED
6 12.11.09
2.10 Amp Driver
L3D25210AUNV1S*
Electrical Ratings (Typical)**
Model
Input Line
Voltage
Input Line
Current
Input
Frequency
Output
Voltage
Output
Current
Output
Power
Class 2
L3D25210AUNV1S
120/277 V
0.27/0.13 A
50/60 Hz
7-12 V
2.10 A + 5%
15-25 W
Yes
L3D25210AUNV1S
L3D25210AUNV1S
Output Voltage vs. Output Current
Power Factor vs. Output Power
Iout vs Vout
Output Power vs Power Factor
12
1
11.5
0.9
11
0.8
10.5
0.7
120 V
277 V
9.5
9
8.5
277 V
0.6
Power Factor
Power Factor
10
Vout(Volts)
Output Voltage (volts)
120 V
0.5
0.4
0.3
8
0.2
7.5
0.1
0
7
0
0.5
1
1.5
2
2.5
15
3
16
17
18
19
20
21
22
23
24
25
22
23
24
25
Output Power(Watts)
Iout(Amps)
Output Current (Amps)
Output Power (Watts)
L3D25210AUNV1S
L3D25210AUNV1S
THD vs. Output Power
Efficiency vs. Output Power
Output Power vs THD(max)
Output Power vs Efficiency
30
100
90
25
THD(%)
THD (%)
20
277 V
15
120 V
10
120 V
70
Efficiency(%)
Efficiency (%)
80
277 V
60
50
40
30
20
5
10
0
15
16
17
18
19
20
21
22
23
24
Output Power(Watts)
Output Power (Watts)
25
0
15
16
17
18
19
20
21
Output Power(Watts)
Output Power (Watts)
* The “S” at the end of the ballast number indicates a studded option. Remove the “S” for a non-studded driver.
** At full light output.
®
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page
6
LED Dimming Driver
Hi-lume® LED
Architectural Dimming
Hi-lume LED
7 12.11.09
Case Dimensions
A
B
A
B
C
D
E
F
G
H
I
8-32 Threaded Stud *
0.29 in (0.736 mm)
F
G
C
I
H
E
D
4.20 in (107 mm)
1.00 in (25 mm)
3.00 in (76 mm)
4.90 in (124 mm)
4.60 in (117 mm)
(mounting centers)
2.00 in (51 mm)
1.08 in (27 mm)
1.60 in (41 mm)
1.39 in (35 mm)
* The “S” at the end of the ballast model number indicates a studded option. Remove the “S” for a non-studded driver.
Wiring Diagram for 3-Wire Dimming
Switched Hot
To
Dimming
Control
Dimmed Hot
Neutral
+V
†
Hi-lume
LED
LED
light
engine
-V †
Ground **
Ground
Wiring Diagram for EcoSystem® Digital Control
Hot
To Line
Voltage
Neutral
+V
†
Hi-lume
LED
LED
light
engine
-V †
Ground
Ground **
E1
To EcoSystem
Bus
E2
** Fixture must be grounded in accordance with local and national electrical codes.
† Maximum lamp-to-driver wire length is 3 ft (1 m).
®
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page
7
LED Dimming Driver
Hi-lume® LED
Architectural Dimming
Hi-lume LED
Hi-lume LED
3-Wire LED Dimmer Wiring Diagram
• Make sure that the supply breaker to Hi-lume LED
Driver and dimmer is OFF when wiring.
• Wire as shown
Hi-lume LED can be controlled with Lutron
fluorescent analog controls, including:
• Ariadni®
• Diva®
• GRAFIK Eye®
• GRAFIK Eye® QS
• GRAFIK 5000TM
• GRAFIK 6000®
• GRAFIK 7000TM
8 12.11.09
3-wire control wiring
• Lyneo LXTM
• Maestro®
• Nova®
• Nova T ®
• Skylark®
• Vareo®
• Vierti®
Line input:
Connects to:
Hot
Dimmer Black Wire
Neutral
Dimmer White Wire
Dimmer wire:
Connects to:
Yellow
Driver Orange (DH)
Red
Driver Black (HOT)
White
Driver White (NEU)
Green
Earth Ground and Driver Ground
Hi-lume LED driver terminals accept one
18 AWG or 16 AWG solid wire per terminal.
3-Wire Dimmer
Red
-V
+V
NC
HOT DH NEU GND E1 E2
Yellow
LUTRON
Green
Hot / Black
Ground*
Ground*
Neutral / White
Green
White
Orange
Black
-V
+V
NC
HOT DH NEU GND E1 E2
Ground*
* Fixture must be grounded in accordance with local and national electrical codes.
®
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page
8
Hi-lume® LED
Architectural Dimming
Hi-lume LED
Hi-lume LED
EcoSystem® Wiring Diagram
Driver Terminals
-V
+V
NC
HOT DH NEU GND E1 E2
Ground *
Driver Terminals
Note: EcoSystem Bus length is limited by the wire
gauge used for E1 and E2 as follows:
Wire Gauge
Bus Length (max)
12 AWG
2200 ft (670 m)
14 AWG
1400 ft (427 m)
16 AWG
900 ft (274 m)
To the EcoSystem
Bus Supply and
up to 64 total
drivers or ballasts
Hot
E1
Ground *
E2
-V
+V
NC
HOT DH NEU GND E1 E2
Hi-lume LED can be controlled digitally as part of
an EcoSystem®, GRAFIK Eye® QSE and/or
Quantum® system. Within these systems it is addressed and configured over the EcoSystem bus
wiring (E1 and E2).
• Connect the two conductors to the two Digital Driver
terminals E1 and E2 as shown.
• Sensors cannot directly connect to the Hi-lume LED
driver. The Hi-lume LED driver can integrate with
sensors when connected to EcoSystem ballasts and
EcoSystem power modules.
• Make sure that the supply breaker to the Hi-lume
LED Driver and EcoSystem Bus Supply is OFF
when wiring.
• E1 and E2 (EcoSystem bus wires) are polarity
insensitive and can be wired in any topology.
• An EcoSystem Bus Supply provides power for the
EcoSystem bus and supports system programming.
• The EcoSystem bus may be wired Class 1 or Class
2. Consult applicable electrical codes for proper
wiring practices.
9 12.11.09
Neutral
LED Dimming Driver
Lighting
circuit fed
from
distribution
or switch
panel
The Hi-lume LED driver terminals and EcoSystem
Bus terminals accept one 18 AWG or 16 AWG solid
wire per terminal.
* Fixture must be grounded in accordance with local and national electrical codes.
®
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page
9
LED Dimming Driver
Hi-lume® LED
Architectural Dimming
Hi-lume LED
Attention
Electricians
and Contractors
ATTENTION
FACILITIES MANAGERS
Driver Leads
SERVICE
Lead lengths from driver to LED light engine must
not exceed 3 ft (1 m).
Replacement Parts
Driver Operating Temperature
Driver case temperature must not exceed 73 °C
at any point.
Wiring and Grounding
Driver and lighting fixture must be grounded. Drivers
must be installed per national and local electrical
codes.
®
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
10 12.11.09
Use replacement parts with exact Lutron model
numbers. Consult Lutron if you have any
questions.
Further Information
For further information, please visit us at
www.lutron.com/hilumeLED or contact our 24-hour
Technical Support Center at 1-800-523-9466.
Page
10