Anti-Automatic Restart for 120 VAC
Anti-Automatic Restart for 120 VAC machines required by OSHA and NFPA Standards,
3 Styles…..$110.00 EACH
Model No. GS-101…20" Cord on machine end and 8' cord with molded wall plug on power end.
Rated 120-volts,
A.C., 15-amp maximum,3/4 HP maximum, 50/60 cycle. ……………….…$110.00
Model No. GS-102…Short extension cord style. 14" cord on male plug end and 12" cord on female receptacle end.
Rated 120 volts, A.C., 15-amp maximum, 3/4 HP motor maximum, 50/60 cycle……………..$110.00
Model No. GS-103…20" cord on equipment switch end and 8' cord on power end (no plug). Rated 200 to 240-volt
A.C., 15-amp (single phase) 2 H.P. maximum, 50/60 cycle…………….…$110.00
Motor Control 120 Volt
UL 508 Listed 120 VAC Motor control box provides a Stop/Start circuit along with a latching
Emergency Stop Button and 8’ power cord with molded male wall plug. The GS-104 also has an
anti-automatic restart feature to prevent machines from automatic re-start after power loss.
Existing machine electrical cord plugs directly into the GS-104. Ideal for meeting current
electrical standards on smaller machinery such as belt sanders, drill presses and grinders.
Model No. GS-104, 15 Amp ¾ H.P. Motor Control 120 Volt with stop/start, e-stop, and antiautomatic restart…$225.00
Model No. GS-104-20A, 20 Amp ¾ H.P. Motor Control 120 Volt with stop/start, e-stop, and antiautomatic restart…$275.00
Combination Starters and Controls for Mills, Drills,
Lathes, and other High Voltage Machines
Model No. GS-105R
Model No. GS-106 XXX**
UL 508 Listed Combination starters and controls can be used on machines with three-phase
208-600 VAC. Includes motor starter, fused disconnect switch, transformer, and Nema 12
enclosure. Guardomation can customize any control to fit your machine.
Model No. GS-105R – MILL PACKAGE Combination starter package for mills or other machines
with reversing motors. Includes reversing starter, fused disconnect, and a remote control box with
a forward / reverse keyed switch, start / stop buttons and LATCHING emergency stop button. For
mills with motors up to 5 HP. Please specify line voltage and amperage when
ordering……………………………….…$2,150.00
Model No. GS-106-XXX** - Starter controls for other machines with line voltage from 208-600
VAC three phase. Control box includes start / stop buttons and LATCHING emergency stop
button with the option of adding a fusible disconnect switch lockable in the “off” position.
XXX** Common configurations and pricing are listed below on ordering
procedure sheet page 5. Call us for any custom configuration not listed.
Emergency Stop Buttons
GS-107…..$75.00
GS-108…..$3.00
GS-109…..$45.00
Emergency stop buttons required by NFPA 79 has latching (push/pull) 22mm red mushroom
button and yellow background “EMERGENCY STOP” legend ring. Also comes with 2 N.C.
contacts (Other configurations available).
Chip Guards and Shields For Turning Machinery
Chuck Guards
Mill Guards
Magnetic Based Guards
Drill Guards
Please call Guardomation at 281-265-2832 for complete pricing or
catalog request
Safety Interlock switches
Model GS-110 Tamper resistant, non-contact coded
magnet switch and control unit. Use on gates and doors with alignment issues. Package includes
sensor, actuator and 24 VDC monitoring control unit. (Call for pricing on 110VAC controller)
Model GS-111
Model GS-112
Model GS-111 Light duty safety interlock switch with 90 degree actuator. 2 N.C. contacts rated at
230VAC, 4 Amp. Includes a M20 to ½ Inch NPT adaptor
Model GS-112 Heavy duty metal bodied safety interlock switch with 90 degree actuator. 2 N.C.
contacts and 2 N.O. contacts rated at 230VAC, 4 Amp
Model GS-113 Safety Interlock Switch with guard door locking. Will not allow door / gate to open
until a signal is received. Power to un-lock 110VAC solenoid supply voltage, 90-degree
actuator……$235.00…(Call for pricing on stop motion sensors / controllers)
THIS PAGE CAN BE FAXED OR SCANNED & E-MAILED TO GUARDOMATION, INC. AT 281265-1276 FAX OR CALL US AT 281-265-2832…E-MAIL jeff@guardomation.com
Model No.
GS-101
GS-102
GS-103
GS-104
GS-104-20A
Description
QTY
120VAC Anti-Restart Device with cord on machine end. 8' cord with
male molded wall plug on power end. Rated 120-volt, A.C., 15-amp
maximum, 50/60 cycle.
120 VAC Anti-Restart Device Short extension cord style. 14" cord on
male plug end, 12" cord on female receptacle end. Rated 120 volts,
A.C., 15-amp, 3/4 HP motor maximum, 50/60 cycle
120VAC Anti-restart 20" cord on equipment switch end. 8' cord on
power end (no plug). Rated 200 to 240-volt A.C., 15-amp (single phase)
2 H.P. maximum, 50/60 cycle
Motor Control 120 Volt with stop/start, e-stop, and anti-automatic
restart, 8’ cord with male molded wall plug, female receptacle,
15 Amp Rating
Motor Control 120 Volt with stop/start, e-stop, and anti-automatic
restart, 8’ cord with male molded wall plug, female receptacle,
20 Amp Rating
Combination starter package for mills.( 20” x 16 x 8”) Includes reversing
starter, fused disconnect, and a remote box with start / stop buttons,
forward / reverse KEYED SWITCH and emergency stop button. Good
for mills up to 5 HP. Please specify line voltage when ordering. Line
GS-105R
voltage_____ Motor Amperage________
Non-reversing starter controls for machines with line voltage from 208600 VAC three phase. Control box includes start / stop buttons and
GS-106N-15
emergency stop button 1-15 AMPERAGE
Same as above with a 30 Amp IEC panel mount fusible disconnect
GS-106N-15-D1
lockable in the off position.
Non-reversing starter controls for machines with line voltage from 208600 VAC three phase. Control box includes stop / start button and
GS-106N-27
emergency stop button 16-27 AMPERAGE
Same as above with a 60 Amp IEC panel mount fusible disconnect
GS-106N-27-D1
lockable in the off position.
Non-reversing starter controls for machines with line voltage from 208600 VAC three phase. Control box includes start /stop buttons and
GS-106N-27
emergency stop button 28-65 AMPERAGE
Same as above with a 100 Amp IEC panel mount fusible disconnect
GS-106N-27-D1
lockable in the off position.
GS-107
GS-108
GS-109
GS-110
GS-111
GS-112
GS-113
Emergency Stop…22 mm panel mount version (with enclosure)
Emergency Stop…22mm Yellow background ring only with
“EMERGENCY STOP” legend
Emergency Stop…22 mm panel mount version (no enclosure)
Non-contact coded magnetic switch with safety monitoring control unit
Light duty safety interlock switch
Heavy duty metal bodied safety interlock switch
Safety interlock switch with guard door locking
Price
$110.00
$110.00
$110.00
$235.00
$275.00
$2,150.00
CALL US
CALL US
CALL US
CALL US
CALL US
CALL US
$75.00
$3.00
$50.00
CALL US
CALL US
CALL US
CALL US
CALL US TO QUOTE REVERSING MOTOR CONTROLS
FREIGHT AND APPLICABLE TAXES ARE EXTRA
COMPANY
_______________________
PURCHASE ORDER #__________
Total
CONTACT
_______________________
TELEPHONE _______________________
SHIP TO ADDRESS____________
______________________________