COMPACT DESIGN
Vantage 500 (Compact Case)
®
KEY FEATURES
Get a 500 amp welder in a compact case; it’s the same size as the Vantage 300 and 400. The
use of a a turbo-charged diesel engine with Lincoln Electric Chopper Technology® makes
this possible. Also, the low weight makes the Vantage 500 Compact a great choice for truck
bed installation where space and weight capacity are limited.
• Stainless steel panels offer added durability
• Select one of five welding process modes
• Plenty of AC Generator power
• Tier 4i Perkins® diesel engine
Publication E6.214 | Issue Date 12/15
© Lincoln Global Inc. All Rights Reserved
www.lincolnelectric.com
Processes »
Stick, TIG, MIG, Flux-Cored,
Gouging
Output »
Input »
Product Number »
K2686-4 - U.S.
K2686-1 - Canada and Export
PERFORMANCE
FEATURES
»» Compact Case with Stainless Steel Enclosure
»»
»»
»»
»»
– One of the most compact 500 amp machines available. Suitable for many pickup and service trucks (subject to vehicle capacity limits).
– Standard stainless steel roof, side panels and engine-access door deliver added protection and durability.
Multi-Process Welding - Separate Arc Gouge Mode
– Select one of five process modes, including CC-stick, downhill pipe (for stick), DC
Touch Start TIG®, CV-wire or new arc gouging
mode which maximizes output with up to 3/8
in. (9.5 mm) carbon rods.
Plenty of AC Generator Power
– 22 kW peak (20 kW continuous)
3-phase 240V AC generator power. Will power industrial equipment such as a plasma cutter, pump or
inverter welder.
– 13 kW peak (12 kW continuous)
1-phase AC generator power for common construction tools.
Engine: 4 Cylinder 1800 RPM Turbo-Charged
Perkins®
– 4 cylinder 1800 RPM Perkins
turbo-charged diesel engine runs smooth and quiet. Standard engine gauges allow you to monitor performance at a glance.
– More HP for output at high alititude than a naturally-aspirated engine.
Innovative Service Access
– Lockable, removable sliding engine access door provides ample space for engine and oil filter work without requiring a large clearance space on your truck.
– Battery drawer on front of machine and top-mounted radiator cover provide convenient access to these systems.
– Patented tilt down control panel for easy servicing of internal components.
– Patented radiator cap cover is latched for easy access and is lockable.
Arc Performance
• 500 amps @100% duty cycle with output range up to 525 amps using
Chopper Technology. All ratings are at temperatures of 104°F/40°C.
WHAT IS CHOPPER TECHNOLOGY®?
Traditional weld control is more
variable around the desired output.
Chopper Technology
delivers extremely fast response
for tighter output control.
Patented and award-winning Lincoln Electric
Chopper Technology
delivers superior DC arc welding performance for general purpose stick,
downhill pipe, DC TIG, MIG, cored-wire and arc gouging.
Benefits of
Chopper Technology include:
- Easy arc starting
- Smooth arc action
- Low spatter levels
- Excellent bead appearance
VRD™ (Voltage Reduction Device™) reduced OCV (open circuit voltage) in
CC-stick welding mode for added safety.
WHAT IS VRD™?
The VRD provides additional safety in the CC-stick weld mode,especially
when working in an environment with a higher risk of electrical shock such
as wet areas and hot, humid, sweaty conditions. The VRD reduces the OCV
at the welding output terminals while not welding to less than 30 volts DC.
The VRD is activated by flipping a toggle switch inside the machine to the
“ON” position. Indicator lights monitor the voltage: green for less than 30
volts while not welding, and either red (greater than 30 volts) or green while
welding, depending on the actual voltage of the arc.
Other weld modes when VRD is on:
Downhill Pipe –There is no output.
CV-Wire
–OCV is not reduced.
Touch Start TIG® –No difference in
operation. TIG is
normally a low
voltage (less than
30 volts) operation.
VRD portion of nameplate
with green light on.
• CC-stick mode is optimized for general purpose stick using E7018 low
hydrogen electrode.
PERFORMANCE
Generator Performance
• Built-in “hot” start for easier starts and restrikes minimizing the
electrode “sticking” to the work.
• Downhill pipe mode with active arc force control ­– enhanced downhill
pipe welding mode. Excellent for cellulosic electrodes. Fast travel
speeds, especially on fill passes. Arc control adjustment for a soft,
buttery arc or a more forceful digging arc.
• Standard DC Touch Start TIG welding, not scratch start, for easy arc
starting that avoids tungsten contamination and the use of highfrequency equipment.
WHAT IS TOUCH START TIG®?
• 3-phase 240V AC generator power rated at 22 kW peak (20 kW
continuous) output to power industrial equipment such as a plasma
cutter, pump or inverter welder. Simultaneously weld and use 3-phase
AC power – for example, up to 12,000 watts can be delivered while
welding at 250 amps. Compare to competitive product which has
3-phase power available as an extra cost factory-only option.
• 3-phase 240V receptacle on control panel eliminates the need to hardwire the connections. Compare to competitive product which usually
requires hard-wired connections.
• The Vantage 500 provides added value at the job site by delivering up
to 13 kW peak (12 kW continuous) watts of 1-phase AC auxiliary power
for equipment such as a Lincoln Electric plasma cutter. Also use for
lights, grinders and other common construction tools. And, you can
simultaneously weld and have access to AC power – 12,000 watts can
be delivered while welding at 250 amps. Compare this to competitive
product which has high output 1-phase AC power available as an extra
cost factory option.
Touch Start TIG® uses a very low voltage to sense when the tip of the
tungsten electrode is touched to the work piece. When this occurs,
a complete circuit is established. When the tungsten is then raised
from the work piece, the circuit senses a change in voltage and
initiates the appropriate welding current and voltage to support the
TIG welding process.
Enjoy the added benefits of Lincoln Electric’s Touch Start TIG when
DC TIG welding. Not only do you avoid tungsten contamination
when arc starting, but you also don’t need extra high frequency
equipment.
• AC generator voltage is constant at 120V or 240V at any weld
dial setting.
• Two 120V GFCI modules sealed from moisture for more
reliable operation.
• All receptacles are circuit breaker protected. Each receptacle has a
spring-loaded weather protective cover which keeps each receptacle
protected from the environment when not in use.
• Excellent CV wire welding with cored-wire and MIG (CO2 and
mixed gas).
SIMULTANEOUS WELDING AND AC GENERATOR POWER
1 Phase
Watts Amps
Weld Amps
0
100
200
300
400
500
PLUS
12,00050
11,10050
10,900 50
9,10043
6,90023
2,40011
­3 Phase
Watts Amps
OR
20,000 50
19,20050
18,000 48
15,10040
11,70031
3,90010
[ 3 ] | Vantage 500
Simultaneous 1 and 3 Phase
Watts Amps
OR
—50
—50
—48
9,100—
6,900—
2,400—
FEATURES
Single-side engine access
with lockable sliding door.
Convenient slide-out battery
drawer below control panel.
Fuel, oil pressure and engine
temperature gauges help you
monitor performance.
Patented latched and
lockable radiator cap
cover.
Output automatically switches to remote
mode when remote device is connected.
For the CC-stick, downhill pipe and
Touch Start TIG modes, the machine
output dial becomes a maximum current
limit for more fine tuning with the
remote control dial or Amptrol™.
• Simple Controls – Keeps training time to a minimum. The flip-down
control panel door keeps less frequently used dials out of the way.
Scratch-resistant Lexan® nameplate.
• Digital weld meters for amps and volts output make it easy to
precisely set your procedures.
• Output at welding terminals controlled by electronic contactor. Can
be switched to “Weld Terminals On” or to “Remotely Controlled”.
• Large 20 gallon (76 liter) fuel tank provides run time for an extended
day–9 hours of welding at 500A/40V/100% duty cycle output, or 33
hours at high idle.
• Great Engine Choice – 45 HP water-cooled 4 cylinder
Perkins 404D-22T turbo-charged diesel engine. Engine has an
Handy oil drain valve and tube
makes oil changes easy.
automatic idler for greater fuel economy and reduced noise. Glow
plug button for cold weather starting.
• More HP for output at high altitude than a naturally-aspirated
engine.
• Engine hour meter for scheduled maintenance.
• LN-25 Ironworker™ across-the-arc wire feeder is a recommended
option. Other across-the-arc choices are the LN-25 PRO and Activ8™.
•14-pin connector for Lincoln Electric wire feeders with control cables:
LF-72, LF-74, LN-7 GMA, LN-8, and LN-25 PRO Dual Power. Also
compatible with Magnum® SG Spool Gun System.
• Two Vantage 500 units can be paralleled in the CC-stick mode to
increase output.
KEY CONTROLS
2
1
24
25
23
22
21
3
20
4
5
6
19
18
7
8
9
17
16
15
10
11
13
Note: Control panel door not shown.
14
12
Vantage 500 | [ 4 ]
1. Glow Plug Button
2. Weld Mode Selector Switch
3. Run/Stop Switch
4. Hour Meter
5. Start Push Button
6. Engine Idler Switch
7. Fuel Level, Engine Temperature and
Oil Pressure Gauges
8. Engine Protection Light
9. Engine Battery Charging Light
10. 120 VAC Circuit Breakers
11. 120 VAC Receptacles
12. Covered Weld Output Terminals + and 13. Sealed GFCI Modules
14. Ground Stud
15. 120/240 VAC Full-KVA 1-Phase Receptacle
16. 240 VAC Full-KVA 3-Phase Receptacle
17. Full-KVA 1- and 3-Phase Circuit Breaker
18. 14-Pin Wire Feeder Connector
19. 6-Pin Remote Control Connector
20. Arc Force and Inductance/Pinch Control Dial
21. Welding Terminals Control Switch
22. Wire Feeder Voltmeter Polarity Switch
23. Digital Amps and Volts Output Meters
24.VRD™ Indicator Lights
25. Output Control Dial
QUALITY AND RELIABILITY
• Simple wire harnessing keeps connections to a minimum for greater
reliability. Lead and harness strain reliefs on all control connections
help ensure trouble-free performance.
• Printed circuit boards are environmentally-shielded using
Lincoln Electric’s engineered potting and protective frame trays.
• Engine protection system includes automatic shutdown for low oil
pressure or high engine temperature.
• Indicator light turns on for low oil pressure or high engine temperature.
A second indicator light turns on if the engine battery charging system
malfunctions.
• Dependability and long life aided by all-copper windings in rotor and
stator with high quality insulation.
• Circuit breaker protection on the battery ignition system provides
added component protection.
• Standard stainless steel roof, side panels and engine-access door
deliver added protection, durability and corrosion-resistance.
Eliminates the need to paint or replace rusting panels.
• Environmental friendly engine! Engine has a closed breather system
to keep the engine compartment and ground clean. This system
eliminates oil mist from collecting inside the engine compartment,
especially on surfaces that would lower engine cooling efficiency.
• Manufactured under a quality system certified to ISO 9001
requirements and ISO 14001 environmental standards.
• Self-bleeding engine simplifies startup if your fuel tank runs dry.
• CSA (Canadian Standards Association) Certified.
• Perkins engine camshaft is gear-driven. No timing belt maintenance.
• Three-year Lincoln Electric warranty on welder (engine is warranted
separately by the manufacturer - see Engine Specifications,
footnote 6).
MACHINE SPECIFICATIONS
Product
Name
Ordering
Information
Description
Vantage 500
K2686-4
U.S.
500 Amp DC Welder with
Engine Gauges
K2686-1
Canada and Export
22,000 Watts Peak
20,000 Watts
Continuous AC Power
3-Phase
13,000 Watts Peak
12,000 Watts
Continuous AC Power
1-Phase
CC Rated Output(1)
CV-Rated Output(1)
Current/Voltage/Duty Cycle Current/Voltage/Duty
Cycle
DC Constant Current
500A/40V/100%
525A/38V/100%
30-525A
DC Constant Voltage(2)
500A/40V/100%
525A/38V/60%
14-40V
Single Dial
Continuous Control
DC Pipe Current
300A/32V/100%
40-300A
Touch Start TIG® Range
250A/30V/100%
20-250A
Wire Feeder Power
120V/60Hz
42V/60Hz
Generator
AC Power(3)(4)
Dimensions
HxWxL
inches (mm)
Weight
lbs. (kg)
22,000 Peak
Watts, 60 Hz
35.9 x 25.3 x 60.0
(913 x 642 x 1524)
1290
(586)
Two 120V Duplex
Receptacles w/
Sealed GFCI Modules
20A Per Duplex
40A Total(5)
To top of exhaust tube:
46.6 (1184)
Arc Gouge
500/40V/100%
30-525A
1-Phase
Full KVA
Receptacle
50A@240V
50A@120V Each
Branch Circuit(5)
3-Phase
Full KVA
Receptacle
50A@240V
Single Dial
Continuous Control
60V DC Max OCV
@1850 RPM
High Altitude: For maximum rating, derate the output 1% for every 2,000 ft. (610 m) up to 6,000 ft. (1828 m) and 2% for every 2,000 ft. (610 m) over 6,000 ft. (1828 m).
High Temperature: For maximum rating, derate 2 volts for every 18°F (10°C) above 104°F (40°C).
DC Constant Voltage capability provides convenience and added safety when welding in electrically hazardous conditions.
(3) When welding, available auxiliary power will be reduced. Output voltage is within +/- 10% at all loads up to rated capacity.
(4) 120V will operate either 60 Hz or 50/60 Hz power tools, lights, etc.
(5) Circuits cannot be wired in parallel to operate the same device.
(1)
(2)
ENGINE SPECIFICATIONS
Engine
Model
Perkins 404D-22T FLEX(6)
EPA Tier 4i
AB&T for U.S.
(6)
Description
4 Cylinder, 4 Cycle
Water-Cooled, Turbo-Charged,
Diesel Engine, 12V Electric Start,
Dry Type Air Cleaner,
Fuel Filter with Water Separator
Horsepower &
Displacement
Dry
Capacities
Operating
Speeds
Fuel
Consumption
45 HP@1850 RPM
FUEL:
20 gals (76 liters)
500A Load
1850 RPM
2.2 Gals/H
8.1 liters/Hr
OIL:
11.2 qts (10.6 liters)
High Idle
1850 RPM
0.6 Gals/Hr
2.2 liters/Hr
RADIATOR COOLANT:
11.5 qts (10.9 liters)
Low Idle
1400 RPM
0.4 Gals/Hr
1.4 liters/Hr
136 cu. in.
(2.2 liters)
Perkins warranty is 2 years/2,000 hours, all non-electric components, 3 years major non-electric components. See warranty for details.
[ 5 ] | Vantage 500
SYSTEM SELECTION
Ready-Pak® Welding Packages (Assembled)
Order:
K2728-5 Vantage 500 Perkins Ready-Pak Package - U.S.
K2724-4 Vantage 500 Perkins Ready-Pak - Canada
Ready-Pak Welding Package (Assembled)
One-Pak® Welding Packages (Unassembled)
Order:
K3244-5 Vantage 500 Perkins One-Pak Package - U.S.
K2724-3 Vantage 500 Perkins One-Pak Package - Canada and Export
Get a welding package with one order number.
Each Package Contains:
• Vantage 500
• Medium Welder Trailer (K2636-1)
•Duo-Hitch® 2 in. (51 mm) Ball/Lunette Eye Hitch (included)
• Fender and Light Kit (K2639-1)
• Cable Rack (K2640-1)
• Cable Connectors - two (K2487-1)
• Electrode Cable 3/0, two 50 ft. (15.3 m) lengths (K2485-3)
• Electrode Cable 3/0, 10 ft. (3 m) (K2483-3)
• Work Cable 3/0, 50 ft. (15.3 m) (K2484-3)
• 400A Electrode Holder (K909-8)
• 500A Work Clamp (K910-2)
One-Pak Welding Packages (Unassembled)
(Only major items shown.)
Vantage 500
K2640-1 Cable Rack
Vantage 500 | [ 6 ]
K2636-1 Medium Welder Trailer
(shown with K2639-1
Fender & Light Kit)
Duo-Hitch 2 in. (51 mm)
Ball/Lunette Eye Hitch (included)
RECOMMENDED ACCESSORIES
GENERAL OPTIONS
120V
Power Plug Kit (20A)
Provides four 120V plugs rated at 20
amps each, and one dual voltage,
full KVA 1-phase plug rated at 120/
240V, 50 amps. 120V plug may
not be compatible with common
household receptacles.
Order K802N
Full-KVA Power Plug (1-Phase)
One dual voltage plug rated at
120/240V, 50 amps. NEMA 14-50P.
Order T12153-9
Full-KVA Power Plug (3-Phase)
One plug rated at 240V, 50 amps.
NEMA 15-50P.
Order T12153-10
Full-KVA Adapter Kit (1-Phase)
Provides convenient connection of
Lincoln Electric equipment having
a 240V AC 1-phase plug (NEMA
6-50P) to the full-KVA receptacle on
Lincoln engine-driven welders.
Order K1816-1
Shown with optional
K2639-1 Fender &
Light Kit
Medium Welder Trailer
For heavy-duty road, off-road, plant
and yard use. Includes pivoting jack
stand, safety chains, and 13 in.
(330 mm) wheels. Stiff .120 in.
(3.0 mm) welded rectangular
steel tube frame construction is
phosphate etched and powder
coat painted for superior rust and
corrosion resistance. Low sway
suspension gives outstanding
stability with manageable tongue
weight. Wheel bearings are packed
with high viscosity, high pressure,
low washout Lubriplate® grease.
Includes a Duo-Hitch® – a 2 in.
(51 mm) Ball/Lunette Eye
combination hitch. Overall width
60 in. (1524 mm). Overall length
124 in. (3150 mm).
Order:
K2636-1 Trailer
K2639-1 Fender & Light Kit
K2640-1 Cable Rack
Four-Wheeled Steerable Yard Trailer
For off-road, plant and yard use.
Includes an automatically engaging
drawbar lock when the drawbar is
raised to the verticle position. 13 in.
(330 mm) wheels. Wheel bearings
are packed with high viscosity,
high pressure, low washout
Lubriplate® grease. Stiff 3/16 in.
(4.8 mm) welded rectangular steel
frame construction is phosphate
etched and powder-coat painted
for superior rust and corrosion
resistance. Also includes a DuoHitch® – a 2 in. (51 mm) Ball/ Lunette
Eye combination hitch. Overall
width 55 in. (1397 mm). Overall
length 132 in. (3353 mm).
Order K2641-2
Spark Arrestor Kit
Mounts to muffler exhust tube.
Virtually eliminates spark emissions.
Order K903-1
Cold Weather Heater and Tarp Kit
For engine starting and operation
in extreme cold weather conditions
down to -40°F (-40°C) (with the use
of 0W40 synthetic oil and arctic
diesel fuel). Includes 120V AC oil pan
heater, 120V AC engine block heater,
and radiator grill tarp.
Order K2679-1
Polarity/Multi-Process Switch
For easy polarity switching.
Example: DC-stick root pass on pipe
and DC+ stick for hot, fill and cap
passes. Also for an easy process
change. Example: DC+ stick root
pass on pipe and DC- Innershield®
self-shielded flux-cored wire for
hot, fill and cap passes. 6 and 14-pin
remote connections can be made
to this unit. For all Lincoln Electric
Chopper Technology engine-driven
welders. Mounts on roof with
K2663-1 Docking Kit.
Order K2642-1
Docking Kit
Secures the K2642-1 Polarity/MultiProcess Switch to the engine-driven
welder roof. Release latch permits
removal of K2642-1 Polarity/MultiProcess Switch. Made from stainless
steel for rust-free operation. For all
Lincoln Electric Chopper Technology
engine-driven welders.
Order K2663-1
TIG OPTIONS
Pro-Torch™ PTA-26V TIG Torch
Air-cooled 200 amp torch (2 piece)
equipped with valve for gas flow
control. 25 ft. (7.6 m) length.
Order K1783-9
Magnum Parts Kit for PTA-26V
TIG Torch
Magnum Parts Kit provides all the
torch accessories you need to start
welding. Parts kit provides collets,
collet bodies, a back cap, alumina
nozzles and tungstens in a variety
of sizes, all packaged in an easy to
carry reclosable sack.
Order KP509
Foot Amptrol™
Provides 25 ft. (7.6 m) of remote
output control for TIG welding.
(6-pin plug connection).
Order K870
Hand Amptrol™
Provides 25 ft. (7.6 m) of remote
current control for TIG welding.
(6-pin plug connection). Velcro
straps secure torch.
Order K963-3 (one size fits all
Pro-Torch™ TIG Torches)
Square Wave TIG 200
This 46 lb (21 kg) TIG and stick
welder includes adjustable AC
Frequency Control and AC Balance
for great results on aluminum, pulse
mode and 120V or 230V input power
capability.
Order K5126-1
STICK OPTIONS
Accessory Kit
Includes 35 ft. (10.7 m) 2/0 electrode
cable with lug, 30 ft.
(9.1 m) 2/0 work cable with lugs,
headshield, filter plate, cover plate,
work clamp and electrode holder.
400 amp capacity.
Order K704
Remote Output Control
Consists of a control box with choice
of two cable lengths. Permits
remote adjustment of output.
Order K857 for 25 ft. (7.6 m)
K857-1 for 100 ft. (30.5 m)
Remote Output Control with 120V AC
Receptacles
Remote weld output control box
with two 120V AC receptacles
having GFCI (Ground Fault Circuit
Interrupter) protection. One cord for
both remote and power. 100 ft.
(30.5 m) length. Permits remote
adjustment of weld output and
power for tools (such as a grinder) at
the work. 20 amp capacity.
Order K2627-2
[ 7 ] | Vantage 500
WIRE FEEDER OPTIONS
LN-25 Ironworker™ Wire Feeder ortable CV unit for flux-cored
P
and MIG welding with MAXTRAC®
wire drive system. Includes digital
meters for wire feed speed/
amperage and voltage, gas solenoid,
internal contactor and 5/64 in. (2.0
mm) drive roll kit for cored wire.
Has 83% reduced wire feed speed
capability for 6 o’clock pipe welding
with Innershield® wire.
Order K2614-9
K126™ PRO Innershield® Gun
For self-shielded wire with 15 ft.
(4.5 m) cable. For .062-5/64 in.
(1.6-2.0 mm) wire. Includes
K466-10 Connector Kit.
Order K126-12
RECOMMENDED ACCESSORIES
Drive Roll and Guide Tube Kit
For .068-.072 in. (1.7-1.8 mm) cored
or solid steel wire.
Order KP1697-068
PLASMA CUTTING
Magnum SG Spool Gun
Hand held semiautomatic wire
feeder. Requires SG Control Module
and Input Cable.
Order K487-25
Magnum PRO 350 Ready-Pak 15 ft.,
.035-5/64 in.
Magnum® PRO MIG/flux-cored
welding guns are rated 100%
duty cycle. The guns are designed
for high amperage, high duty
cycle applications in extreme
environments where
heat-resistance and fast
serviceability are key.
Order K2652-2-10-45
Tomahawk® 1000
Cuts metal using the AC generator
power from the engine-driven
welder. Requires the T12153-9
Full-KVA Power Plug (1-Phase).
Order K2808-1
SG Control Module
The interface between the power
source and the spool gun. Provides
control of the wire speed and gas
flow. For use with a spool gun.
Order K488
Input Cable
(For SG Control Module)
For Lincoln engine power sources
with 14-pin MS-type connection,
separate 115V NEMA receptacles and
output stud connections.
Order K691-10
Drive Roll and Guide Tube Kit
For .035 in. and .045 in.
(0.9-1.1 mm) solid steel wire.
Order KP1696-1
PRODUCT SPECIFICATIONS
Product
Name
Product
Number
Rated Output
Current/Voltage/Duty Cycle
Output
Range
Vantage 500
K2686-4
U.S.
K2686-1
Canada and Export
500A/40V/100%
525A/38V/60%
Vantage 500
One-Pak
K3244-5
U.S.
K2724-3
Canada and Export
30-525A DC
40-300A Pipe
20-250A DC TIG
14-40V CV
30-525A Gouge
3-Phase AC Power:
22 kW Peak, 20 kW Continuous
1-Phase AC Power:
13 kW Peak, 12 kW Continuous
Vantage 500
Ready-Pak
K2728-5
U.S.
K2724-4
Canada
Engine
Perkins 404D-22T
Turbo Diesel
EPA Tier 4i
AB&T for U.S. and
FLEX for Canada
Number
of Cylinders
HP @
Speed (RPM)
HxWxD
inches (mm)
4
45 @ 1850
Machine only:
35.9 x 25.3 x 60.0
(913 x 642 x 1524)
To top of exhaust tube:
46.6 (1184)
Net
Weight
lbs. (kg)
1290
(586)
___
___
For best welding results with Lincoln Electric equipment, always use Lincoln Electric consumables. Visit www.lincolnelectric.com for more details.
Manufactured at a facility with certified ISO Quality and Environmental Management Systems.
CUSTOMER ASSISTANCE POLICY
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On
occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to inquiries to the best of their ability based on information provided to them by the customers and the knowledge
they may have concerning the application. Our employees, however, are not in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant
or guarantee or assume any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or implied warranty that might
arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is specifically disclaimed. Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln
Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
The Lincoln Electric Company
22801 St. Clair Avenue • Cleveland, OH • 44117-1199 • U.S.A.
www.lincolnelectric.com