DC FANS
5 VDC 60MM
Liu Mateally. 5 Vdc, 0.15A.
60 x 60 x 10mm fan. Seven
impellers. Two, red and black,
short leads. Removed from
equipment. CE, TUV, UL.
CAT# CF-444U
$2.00 each
12 VDC 40 MM
Delta Fonsan # DFB0412H. 40 x
40 x 20mm. 12Vdc 0.10A. 5” leads
with 2-pin socket connector
(0.1” ctrs). New fan prepped
with double-sided sticky tape
on one edge. UL, CSA, CE.
CAT# CF-414
$3.25 each
Delta #GFB0412VHF. 12 Vdc,
0.54A dual rotor cooling fan.
40 x 50 x 32mm thick.
9500 RPM, 19.7 CFM, 51.5 dBA.
Removed from equipment.
Five 4" leads with 4-pin female
connector (0.1" spacing). UL, CSA, CE, VDE.
CAT# CF-447U
$4.25 each
12 VDC 60 MM
Adda AD0612LS-A70GL.
12 Vdc, 0.08A fan
brushless sleeve bearing fan. 60 x 60 x 25mm.
2500 RPM, 13.2 CFM,
16.1 dB/A. Two 12" leads.
UL, CSA, CE.
CAT# CF-582
$2.50 each
Adda AD0612MS-A70GL.
12 Vdc, 0.14A fan brushless
sleeve bearing fan. 60 x 60 x
25mm. 3500 RPM, 18 CFM,
24 dB/A. Two 12" leads.
UL, CSA, CE.
CAT# CF-583
$2.65 each
Mitsubishi # MMF 06D12DL.
12 Vdc @ 0.07 Amps.
60mm x 60mm x 25mm brushless seven blade fan. UL, CSA.
CAT# CF-427
$2.75 each
DC Tiny 25 III# TUDC12Z4F-022.
12 Vdc 0.14A 1.8W. 60 x 60 x
25mm. 19 CFM. 4300 RPM.
32 dBA. Two 5" leads prepped
with heatshrink tubing and 2-pin
female (0.1") connector.
UL, CSA, TUV.
CAT# CF-408
$2.75 each
Y.S. Tech # NYW06025012BL.
12 Vdc 0.08A. (7 -13.2Vdc).
60 x 60 x25mm. Ball bearing
fan. 2800 RPM. 15.8 CFM.
23.5 dB(A). 6" leads with
2-conductor, 0.1" spacing,
female connector. cULus.
CAT# CF-589
$2.25 each
10 for $2.10 each • 100 for $1.90 each
12 VDC 80 MM
Delta Electronics# FFB0812VHE-H715
12 Vdc, 0.57 Amp. 80 x 80 x 38mm.
57.21 CFM. 4200 RPM. 44.5 dBA.
Ball-bearing. Three 9" wire leads
to 3-pin connector (Molex 2510).
Features speed sensor (Tach) /
locked rotor alarm. CE, UL, CSA,
VDE. Note: May have some discoloration on metal parts due to storage conditions.
CAT# CF-590
$3.00 ea. • 10 for $2.75 ea.
Orion# OD 8025-12HB.
NEW
12 Vdc, 0.25A, 0.25W.
Dual ball bearing.
40 CFM. 3100 RPM. 35 dBA.
Two 12" wire leads. 80 x 80 x
25mm. CE, TUV, cULus.
CAT# CF-593
$2.25 each
NMB-MAT 3106KL-04W-B50.
12 Vdc, 0.30A. 3000 RPM.
32.8 CFM. 34 dB. 80 x 80 x
15mm. Black plastic casing and
impeller. Ball bearing.
CE, CSA, UL.
CAT# CF-587 $2.35 each
60 for $2.10 each • 120 for $1.95 each
Ning Jie Electronic
NEW
# NJ8025SE.
12 Vdc, 0.08A.
80 x 80 x 25mm low noise,
DC brushless fan. 1750 RPM.
16.3 dBA. Sleeve bearing.
Two 16" leads with 4-Pin molex
daisy chain pass-thru connector. CE.
CAT# CF-429
$2.50 each
GlacialTech® Model
#PLA08025S12HH.
12 Vdc, 0.23A fan.
80 x 80 x 25mm.
Fan Speed 1800 ~ 3000 RPM
Fan Air Flow, 21.4 ~ 41.3 CFM
Fan Noise, 19 ~ 31dBA.
CAT# CF-580
$2.25 each
12 VDC 92 MM
AVC Model C9025S12H
12Vdc, 0.3A. 92 x 92 x 25mm.
Sleeve bearings. Three
5.5” leads with 3-conductor
female socket connector
(0.1” ctrs). 52 CFM, 34 dBA.
UL, CSA, CE, TUV.
CAT# CF-407 $3.50 each
Power Logic # PLA09225S12H-5.
12 Vdc, 0.38A brushless fan.
92mm diameter x 25.5mm.
Fan Speed, 2,400 RPM.
Fan Air Flow, 44.1 CFM.
Fan Noise, 33dBA.
Four 12" leads with 4-contact
female connector. cULus,
CE, TUV. Four mounting holes on
72 x 72mm centers on each side of fan, so it can be
mounted on either side to blow or draw air.
CAT# CF-595
ORDER TOLL FREE 1-800-826-5432
$2.50 each
21
125VAC 172MM
12 VDC 120 MM
Thermocool# G17050HASB
2900 RPM, 198 CFM. 125Vac,
0.4A. Ball bearing fan.
172mm dia. x 51mm.
Terminals for standard fan plug
or solder. cULus, CE, TUV, RoHS.
Ning Jie Electronic
NEW
# NJ12025SE.
12 Vdc, 0.12A.
120 x 120 x 25mm low noise,
DC brushless fan. 1400 RPM.
Sleeve bearing. Two 18.5" leads
with 4-Pin molex daisy chain
pass-thru connector.
CAT# CF-430
CAT# CF-415
72MM 14 VDC BLOWER
$3.00 each
Powerful, compact centrifugal blower
designed for medical application.
72mm dia. x 60mm wide body.
17.5mm I.D. port. Operates on
14Vdc @ 2A (no load). 50 LPM.
2 conductor 3.5' cable terminating
to 3 pin connector.
24 VDC 172 MM
Comair Rotron Patriot DC
Model# PD24B6TDNX.
24 Vdc 1.0 amp.
235 CFM. 52 dB.
Ball Bearings.
172.00 dia. x 51.00 mm.
Three 4" leads. UL, CSA.
CAT# CF-481
CAT# CF-586
Display temperature and your
message in red and blue LEDs
that create the illusion of words
over the rotating blades. Clear
plastic frame and impellers.
Includes a software CD and a
USB cable to program your
message using any computer
running a Windows® operating system.
Max 128 characters / spaces into 32 layers
115 VAC 80 MM
EZ Fan# FP-108A-S-3.
3.13” square X 1.5”. 110/120 Vac,
50/60 Hz. 0.08/0.06 A. 6/5 W.
17 CFM. Zinc housing with
seven blade thermoplastic
impeller. Terminals accept standard
fan plug or can be soldered.UL. CSA.
80 x 80 x 25mm
12 Vdc, 0.09 A. 22 dBA. 22.44 CFM.
1700 RPM.Three 8" leads with 3-pin connector and
adapter to 4-pin connector. cULus, TUV, CE, RoHS.
CAT# CF-117 $14.80 each
CAT# CF-418
115 VAC 120 MM
for square fans.
54 CFM, SLEEVE BEARINGS
EZ Fan # FP-108-1-S3.
110/120 Vac, 0.11 Amps.
85 CFM, SLEEVE BEARINGS
Thermocool #G12038MAS
2600 RPM. 60Hz, 0.22A. 44 dBA.
$17.75 each
NEW
$15.00 each
120 CFM, SLEEVE BEARINGS
EZ Fan # FP-108-U S1
3000 RPM. 45 dBA.
$15.00 each
120 CFM, BALL BEARINGS
EZ Fan # FP-108-U S1B or (SU-BBT)
3000 RPM. 45 dBA.
CAT# CF-282
22
$19.00 each
Fan size
60mm
80mm
92mm
120mm
CAT#
FF-60
FF-80
FF-92
FF-120
each
$3.30
$3.45
$3.60
$3.60
RUBBER FAN MOUNTS
105 CFM, BALL BEARINGS
CAT# CF-281
each
$1.00
$1.25
$1.60
75¢
$1.60
PLASTIC FILTER KITS
$18.95 each
Orion# OA4715-12TB
3000 RPM. 43 dB.
CAT#
CFG-60
CFG-80
CFG-120
CFG-120U
CFG-172
Plastic guard, filter and retainer.
Foam filter can be removed and
cleaned when necessary.
EZ Fan # FP-108-1-S3B.
110/120 Vac, 0.11 Amps.
CAT# CF-591
Fan size
60mm
80mm
120mm
120mm - used
172mm
$14.80 each
54 CFM, BALL BEARINGS
CAT# CF-112
$5.95 each
METAL FAN GUARDS
4.69” square x 1.5.” Aluminum
housing. Thermoplastic impeller.
Terminals accept standard fan
plug or can be soldered.
UL, CSA, TUV, CE.
CAT# CF-275
$9.95 each
PROGRAMMABLE FAN
$18.50 each
AC FANS
CAT# CF-120
$21.95 each
Reduce cooling fan vibration and noise.
These silicone mounts effectively
decouple and absorb unwanted vibration.
They press-fit into the mounting holes of most
cooling fans. No case mods required.
CAT# RFM-1
4 for $1.00
ANTI-VIBRATION GASKET
Rubber surround for 60mm fans.
Fits snugly around fan casing,
preventing lateral vibration.
CAT# GST-60
$1.00 50¢ each
10 for 40¢ each
REDUCED
VISIT OUR WEBSITE - WWW.ALLELECTRONICS.COM
FAN CORDS
HEATSINK FOR TO-220
Fit all cooling fans with solder/plug terminals.
Thermalloy# THM 6047. Clip-on TO-220
semiconductors. 20.5 x 21.5 x 8.0mm.
3’ CORD WITH
STRAIGHT PLUG
CAT# HS-6047 4 for $1.00
100 for 20¢ each
CAT# CFC-14 $1.75 each
HEATSINK FOR TO-202
6’ CORD WITH AC PLUG
Thermalloy# THM 6046.
Clip-on TO-202 semiconductors.
Right-angle cooling-fan plug on
18/2, SPT-1 zip cord. Standard
2-conductor AC plug for use
with 120Vac fans. Cut plug if
used with DC fans.
CAT# HS-6046 4 for $1.00
100 for 20¢ each
50 X 50 X 45MM HEATSINK
Aavid black anodized aluminum
heatsink prepped with 36mm square
of thermal compound on bottom.
Includes stainless steel clip for hold
$2.50 each
down. CAT# HS-585
CAT# CFC-15 $3.00 each
FAN DAISY-CHAIN POWER CORDS
Run multiple fans with one cord.
12" wire between plugs.
45° plug fits all cooling
fans equipped with
solder / plug terminals.
24" lead wire. 2/18, SPT-1 zip cord.
2 fan
3 fan
CAT# CFC-16
CAT# CFC-17
$6.50 each
$7.50 each
AC FAN CORD WITH THERMOSTAT
Fan cord with a thermostatically
controlled switch that turns
AC fan on as temperature
approaches 88°F (-3/+5),
turns off fan as temperature
moves below 80°F. Saves energy
and reduces noise. One cord can be
used to control multiple fans. 36" cord
with 2-conductor fan plug. Thermostat
is 6" from plug end of cord. cULus.
CAT# CFC-18
$9.95 each
HEAT SINKS
31 X 16 X 11MM HEATSINK
Black anodized aluminum heatsink,
31 x 16 x 11mm high. The middle
16 x 16mm underside surface is
prepped with thermal compound.
Designed for a device, 16mm wide.
CAT# HS-154 45¢ each
THM 6030. Vertical mount, tin coated
copper heatsink for TO-220 device.
30 x 25.5 x 12mm.
CAT# HS-6030 $1.50 each
10 for $1.30 each
TO-220 CLIP-ON HEATSINK
Aavid Thermalloy #7139D
Copper heat sink with integrated
slide-on mounting clip. Tin plated.
19.81 x 13.21 x 13.08mm
(0.780” x 0.520” x 0.515”).
CAT# HS-7139 3 for $1.00 • 100 for $25.00
TO-220 HEATSINK
Thermalloy # THM6079.
0.75" x 0.52" x 0.5" h. With PC pin.
25¢ each
Aluminum heatsink.
Square patch of thermal
compound on bottom.
Removable hold-down clip.
CAT# HS-570
$3.20 each
85 x 83 x 45MM
Aluminum heatsink.
Square patch of thermal
compound on bottom.
Removable hold-down clip.
CAT# HS-580
$3.50 each
100MM DIA. X 41MM
Aluminum heatsink.
Removable mounting brackets.
36 x 36 x 5mm square
aluminum mounting plate with
thermal compound on bottom.
Plastic push-down latches.
15.5mm diameter recessed copper core.
CAT# HS-595
$3.95 each
HEAVY-DUTY HEATSINK
15.75" x 3.25" x 2.13"
aluminum heatsink.
6 fins. There are four
0.13" high ribs running
REDUCED
the length of the bottom.
Fairly clean, but some stickers
have been peeled off of sides of heatsink. 2.25 Lbs.
CAT# HS-433
COPPER HEATSINK FOR TO-220
CAT# HS-325
100 for $20.00
77 x 67 x 35MM
$12.50
$10.95 each
THERMOELECTRIC
(PELTIER) DEVICE
A solid-state heat pump that transfers heat from one
side of the device to the other depending on the
direction of the current. When current is applied one
side gets hot and the other gets cool. Commonly
used to cool, heat or regulate temperature, it can
also take advantage of a temperature differential to
generate electricity. The hot side should be attached
to a heatsink.
· 40 x 40 x 3.6mm
· lmax - 7A
· Umax - 15.4V
· Qcmax - 62.2W
· Tmax - 69C
· 1.7 Ohm resistance
· 127 thermocouples
· Max Operating Temp: 180°C
· Min Operating Temp: -50°C
CAT# PJT-13
$14.50 each
ORDER TOLL FREE 1-800-826-5432
23