Layout 1 (Page 1)

advertisement
WALL TRANSFORMERS
STYLE D
Screw
Terminals
co-ax plug
STYLE C
Wall Type
phone plug
STYLE B
Table Top
A.C. WALL TRANSFORMERS
VOLTS
AMPS
TERMINATION
STYLE
12 Vac
12 Vac
12 Vac
16 Vac
16 Vac
24 Vac
24 Vac
1200 ma
1.67 amp
3 amp
20VA
40VA
830 mA (20VA)
1.6 amp (40VA)
2.1mm coax
Screw terminals
2.1mm coax
Screw terminals
Screw terminals
Screw terminals
Screw terminals
C
D
C
D
D
D
D
CAT#
PRICE
ACTX-1222
ACTX-12167
ACTX-123
ACTX-1620
ACTX-1640
ACTX-2420
ACTX-2440
100 +
$9.75
$12.50
$18.50
$7.00
$9.25
$8.95
$9.50
$9.15
$11.85
$17.00
$6.00
$8.50
$7.70
$8.75
A Note on Wall Transformers: A.C. and D.C. Wall Transformers are not regulated unless otherwise
stated. They provide a specified voltage at a specified load. If the load is lower than specified, the voltage
will be higher then specified. With a higher load, the voltage will drop below that specified. For example, a
12 volt 500 ma. wall transformer may read 20 volts with no load or 9 Volts with a 600 ma. load.
D.C. WALL TRANSFORMERS
VOLTS
AMPS
TERMINATION
CENTER
STYLE
3 Vdc
7.5 Vdc
9 Vdc
9 Vdc
9 Vdc
12.5 Vdc
100 ma
1 amp
150 ma
200 ma
300 ma
410 ma
2.5mm phone plug
2.1mm co-ax
1.7mm co-ax
2.5mm coax
1.3 mm co-ax
2.5mm co-ax
negative
positive
positive
positive
positive
positive
C
C
C
C
C
C
CAT#
DCTX-31
DCTX-751
DCTX-9150
DCTX-924
DCTX-936
DCTX-1241
PRICE
$1.35
$4.85
$2.50
$3.00
$2.85
$4.60
100+
$1.00
$4.15
$1.65
$2.50
$2.10
$4.00
For regulated plug-in-wall switching power supplies see pages 56 and 57
SINGLE OUTPUT SWITCHING POWER SUPPLIES
Ideal for scanners, cameras and sensitive equipment requiring a constant, regulated output.
Unless otherwise noted, all of the following power supplies operate on 120-240 Vac.
Style A
Horizontal Wall Mount
Style B
Vertical
Wall
Mount
Right-angle
Coax plug
Coax plug
Style D
PiggyBack
Style C
Table Top
DIN plug
Phone plug
5 VDC 1 AMP (Style A)
5 VDC 3 AMP (Style B)
5' cord, with unknown/custom coax connector,
center positive. cULus, CE.
44" cord with ferrite bead and 2.5mm
coax plug, center positive. cULus. FCC.
CAT# PS-517
CAT# PS-534
$5.65 each
5 VDC 2 AMP (Style A)
3.5' cord with right-angle coax power plug,
2.1mm id, center positive. RoHS. cULus.
CAT# PS-529
$6.85 each
5VDC 2A (STYLE B)
PHIHONG# PSM-11R-050. 6' cable with 2.1mm
coax plug, center positive. Includes two snap-on /
snap-off AC plugs for use in USA and Europe. CE,
cULus, TUV.
CAT# PS-522
$7.50 each
5VDC 2A (STYLE B)
Ktec# KSAC0500200W1UV-1. 6' cable with ferrite
bead and 2.5mm coax plug, center positive.
Includes three snap-on / snap-off AC plugs for use
in USA, Europe and the UK. CE, cULus, TUV.
CAT# PS-528
54
$7.50 ea. • 100 for $6.75 ea.
MiniUSB
plug
NEW
$7.50 each
9 VDC 600MA (Style B)
2.1mm x 5.5mm coax power plug. Center+. UL.
CAT# PS-961
$9.75 each
9VDC 0.66A (Style B)
GlobTek, Inc. # WR9QD660EJ1-N-MNA.
Model: GTM41076-0609. 6' long cord with ferrite
bead, and small custom coax plug, center+. cULus.
CAT# PS-966 $3.50 each
60 for $3.25 each • 120 for $3.00 each
9 VDC 1A (Style B)
APS #HK-C109-A09. 4' output cord with
1.3mm coax power plug. Tip positive. cULus, FCC.
CAT# PS-912 $7.25 each • 10 for $7.00 each
30 DAY MONEY-BACK GUARANTEE
12 VDC 500 MA (Style A)
5' cable with 2.1mm coax plug. Center+. cULus.
CAT# PS-1251 $8.50 each
10 for $8.00 each
12 VDC 500 MA (Style B)
12 VDC 5.8 AMP (Style C)
NEW
Power-Win Technology# PW-070A-1Y12D0
Detachable IEC power input cord. 5' output cable
with 2.5mm coax power plug, center positive.
6.1" x 3.35" x 1.97". cULus, UL, TUV.
CAT# PS-1276
$21.75 each
5’ cable w/ 1.3mm right-angle coax plug. Center+.
CE, FCC, cULus.
12 VDC 15 AMP (Style C)
CAT# PS-1253
Protek Power PUP22012.
7.76" x 3.46" x 1.73" (197 x 88 x 44mm). 3' output
cable with two ferrite noise suppression beads, and
4-pin plug that mates with Kycon P/N KPJX-4S-S or
equivalent. Overvoltage, overcurrent protection.
Detachable 3-conductor power cord. CE, cULus.
$7.75 each
12 VDC 1 AMP (Style A)
Flypower# PS12K1201000UE.
4' long cord with 2.1mm coax power plug,
center positive. cULus, FCC.
CAT# PS-121
$7.20 ea. • 10 for $6.85 ea.
12 VDC 2.6 AMP (Style C)
NEW
4.50" x 2.00" x 1.25". 6' output cable with
2.1mm coax plug, center positive.
3' two-conductor power cord. Used, working units.
Guaranteed functional. cULus.
CAT# PS-1226U
$7.25 each
12 VDC 1.25A (Style B)
YHI# 898-1015-U12S. 5' output cord w/ 2.1mm coax
power plug and ferrite bead. Tip positive. cULus.
CAT# PS-12125
$7.50 each
12 VDC 1.5 AMP (Style A)
4' cord with 2.1mm coax power plug. Tip positive.
CAT# PS-1228
$10.50 each
12 VDC 2A (Style C)
$7.75 each
12 VDC 2 AMP (Style A)
4' cord with 2.1mm coax power plug. Tip positive.
CAT# PS-1227
$11.75 each
12 VDC 1 AMP (Style A)
NEW
HDP# PS12K1201000U5. 10' cord with
2.5mm coax plug, center positive. cULus. FCC.
CAT# PS-1212
$7.25 each
10 for $6.90 each
12 VDC 3 AMP (Style C)
Model: PS120V3000-D. 117 x 48 x 34mm. 5' cable
with 2.5mm coax plug. Center positive. Detachable
IEC power input cord. cULus.
CAT# PS-1260
$16.00 each
12 VDC 3 AMP, USED (Style C)
4.75" x 2.58" x 1.43". 6' output cable with 2.5mm
coax plug, center+. 2' two-conductor power cord.
cULus. Used, working units. Guaranteed functional.
CAT# PS-123U
$7.75 each
10 for $7.25 each
12VDC 3.33 AMP (Style C)
Model: G40DD-120333. 6' long output cord.
Non-standard coax power plug, 6.3mm od x
2.6mm id x 13mm long, center positive. Plug fits
some, but not all, coax jacks with 2.5mm center pin.
cULus, RoHS, FCC.
CAT# PS-3332
$14.75 each
12 VDC 5 AMP (Style C)
Model: FY1205000.
119 x 54 x 31mm. 5' cord with ferrite split bead and
2.5mm coax power plug. Center positive. cULus.
CAT# PS-1262
15 VDC 1 AMP (Style C)
5' cord with 1.3mm coax power plug, center+.
Detachable 2-conductor power cord. TUV, CE.
CAT# PS-1501
$18.75 each
$8.95 ea. • 10 for $8.25 ea.
15 VDC 1.5 AMP, USED (Style B)
NEW
I.T.E.# PS-1.75-15-15W. 6' cable with
unknown coax plug, center positive. cULus.
CAT# PS-151U $5.75 each
10 for $5.25 each
24 VDC 2.8 AMP (Style C)
Sino-American# SA165E-24U. 6' output cord with
2.5mm coax power plug, center positive. Detachable 2-conductor power cord. cULus, TUV, CE.
CAT# PS-2428
QIW Model# GFP241DA-1220-1. 96 x
44 x 29mm. 2.5mm id coax power plug, tip+.
Detachable 2-conductor power cord. cULus, CE.
CAT# PS-1268
CAT# PS-12152 $39.75 each
16 for $37.00 each
$10.95 ea. • 10 for $9.95 ea.
24 VDC 3.2 AMP (Style C)
EDAC# EA1060B. Input: 100-240V. Detachable
2-conductor power cord. 6' output cord with ferrite
noise-suppression bead. Terminated with 2.5mm
coax power plug, center positive. cULus, TUV, CE.
CAT# PS-2432 $11.95 ea. • 10 for $10.95 ea.
24 VDC 4.2AMP
EOS™ Model LFVLT100-1003
Input: 100-240V 50-60Hz 2.2A.
Output: 24Vdc @ 4.2A.
Standard 3" x 5" x 1" thick
configuration. Removed from
new equipment. 2 capacitors are
soldered to the pc board between the ground and
power input terminals of the board. Input and output
header connectors included. cULus, CE, DVE.
CAT# PS-2443
$14.50 each
24 VDC 5 AMP (Style C)
NEW
Megmeet# Mango240-0500AY.
6.25" x 2.55" x 1.40" table-top supply with
detachable power cord. 5' output cord with ferrite
bead and 4-pin mini-DIN plug. CE, TUV.
CAT# PS-2451
$16.85 each
28 VDC 10.71A POWER
SUPPLY (LED DRIVER)
REDUCED
Thomas Research Products
# TRV-300S028ST 300W.
Input: 100 - 277V, 50/60Hz, 3.3A @
100Vac. Fully-enclosed, heatsink covered
supply designed for driving LED lighting
fixtures, however functions quite well as a 28Vdc
power supply for other applications. 9.87" x 3.87 x
1.77". Flanges for bulkhead mounting with holes on
9.5" centers. 10" output cord with 2-pin Molex-type
connector. Three-conductor, 26" power input cord
with pigtail leads. cULus, CE. RoHS.
CAT# PS-1028
ORDER TOLL FREE 1-800-826-5432
$29.00
$17.95 each
55
29.4 VDC 2 AMP (Style C)
4.28" x 1.79" x 1.24". 6' cable with
2.5mm coax plug, center positive.
Detachable 2-conductor power cord.
NEW
Output: 12V-2000 mA / 5V-5A.
2.5' output cord with 8-pin
mini-DIN plug.Detachable
IEC power input cord. CE.
CAT# PS-294
$9.00 each
10 for $8.25 each
CAT# PS-5512 $9.95 each
48 VDC 0.38A (Style C)
Phihong #PSC18U-480. 5' cord with molded 2.5mm
coax power plug. Center+. Includes detachable IEC
power cord. cULus, CE. RoHS.
CAT# PS-480
$5.50 each
SELECTABLE OUTPUT SUPPLIES
Regulated switching power supplies with selectable
voltages. Ideal for portable electronics and bread
boarding projects.
Selectable voltages: 3/4.5/6/7.5/9/12 Vdc
Includes a variety of popular connectors.
CAT# PS-10
$13.95 each
DC LAB POWER SUPPLY 0-15V / 3A
DIGITAL DISPLAY W/ BACKLIGHT
• Output voltage:
0 - 15V adjustable
• Output current:
0 - 3A adjustable
• Ripple voltage: 1.0mV(rms)
• Backlighted LCD displays
• Fuse Protected
• Dimensions:
8 7/16" x 6 3/64" x 3 3/4"
• Weight: 7.75 lbs.
CAT# UDC-3
$7.50 each
STEP-DOWN REGULATORS
$179.75 each
SHOP ON-LINE
LM2596HVS. Similar to our
CAT# DCC-3 (LM2596S), with
higher input voltage capability,
4.5-60V. Adjustable output, 1.25-37V,
1.5A continuous. 1.77" x 0.87" x 0.50".
$8.50 each
NEW
Water-proof, corrosion-proof solar cell arrays with
adjustable mounting stands and alligator clip leads.
UV-proof polycarbonate plastic case. Built-in
blocking diode to prevent discharge at night.
12 VOLT
1260 Mw max power.
Max voltage,
18 Volts (no-load).
Current, 60-70 mA.
6.8” x 6.2” x 0.68”
Digital LCD displays for
Voltage and Current (for
adjustable supply). Current limit
indicator. Ripple and noise < 5 mV. Short
circuit protected. Fused 6" x 5.75" x 12" 4.5 Kg.
HQ Power # PS3003U.
Compact, single output lab
power supply. Dual LCD
displays. Coarse and fine
adjustments for voltage and
current. Settable voltage and
current limits with LEDs to
indicate when current or
voltage limits are operational.
Size: 6" H x 5 1/2" W x 11 1/2" D
Weight: 11 lbs. 1 year warranty.
$12.50 each
SOLAR BATTERY CHARGERS
0-30 Vdc, 3 Amp -adjustable voltage and
current. 12 Vdc, 1.2-1.6 A.
5 Vdc, 1.2-1.6 A
VARIABLE POWER SUPPLY,
0-30 VOLT / 0-3 AMP
CAT# DCC-3M
SOLAR CELLS
0-30VDC +5VDC +12VDC LAB
POWER SUPPLY/LCD DISPLAY
$199.95 each
$7.95 each
With LED Digital Display and
Screw Terminals. 2.6” x 1.4”
CAT# DCC-4
CAT# PS-1503 $99.00 each
CAT# PS-3003
XL6009 DC-DC up/down voltage
regulator (buck/boost driver).
Input: 4-32V, 1.2A continuous current.
3A max. Output: 1.25-35V adjustable.
NEW
1.90" x 0.98" x 0.5". Mounting holes.
CAT# DCC-3
$21.95 each
ADJUSTABLE OUTPUT SUPPLIES
56
BUCK BOOST CONVERTER
Connect via solder holes.
1.95” x 0.96”
2.2A Max current
CAT# PS-613
DC VOLTAGE REGULATORS
Circuit based on LM2596 Step-Down regulator
(buck driver). Input: 4-40V. Output: 1.25-37V
adjustable, 1.5A continuous current. 3A max.
1A Max. current
CAT# PS-22
12VDC @ 2A / 5VDC @ 5A SUPPLY
CAT# SPL-6012
$27.95 each
DC VOLTAGE CONTROLLER
FOR SOLAR PANELS
10 Amp 12 Vdc output. 4.04" x 3.75" x
1.50". Prevents battery from being overcharged and over-discharged. Coordinates
the functioning of solar panel, battery and load.
CAT# SCN-3
$29.95 each
SOLAR PANELS
Rugged photovoltaic solar
panels. Sealed to withstand
rain and snow. Heavy-duty
anodized aluminum frame.
High-transparency, low-iron tempered glass.
Junction box with screw or solder terminals. CE.
Watt
3
5
10
20
Volt
12
12
12
12
Dimensions
188 x 195 x 17mm
265 x 220 x 18mm
302 x 357 x 30mm
567 x 357 x 30mm
WWW.ALLELECTRONICS.COM
CAT#
SPL-003
SPL-005
SPL-010
SPL-020
each
$20.95
$33.50
$52.00
$94.35
840 contacts. 1 terminal strip
and two power buss strips.
2 5/8" x 6 7/8" x 3/8” high
CAT# PB-840
$7.65 each
1680 contacts. 2 terminal strips, 4 buss
strips, 3 binding posts mounted on an
aluminum back plate 5 1/8" x 6 7/8" x
3/8” high.
CAT# PB-1680
$15.95 each
JUMPER WIRE SETS
Pre-formed jumper wires
for use with solderless
breadboards. 14 color-coded
lengths. AWG 22 solid wire.
Unbreakable clear plastic storage case.
140 PIECE ASSORTMENT
10 of each size
25 of each size
3260 contacts. 4 terminal strips,
7 buss strips, 4 binding posts
mounted on an aluminum
back plate 7 7/8" x 8 3/4” x
3/8” high.
CAT# PB-3260
$32.00 each
POWERED BREADBOARD
Features:
DC power supplies:
5Vdc @ 1.5 Amp fixed
0-15Vdc @ 500mA adjustable
0-15Vdc @ 500mA adjustable
Input: 120/ 240Vac @50-60Hz
Overload & short-circuit protection.
Detachable AC power cord.
10.75" x 8.75" x 3.25". 6 lbs.
$138.00 each
BREADBOARD POWER SUPPLY
YwRobot, MB-V2 is a module that plugs
into our solderless breadboards
(except CAT# PB-170) and
provides 5V or 3V power to the rails.
Also provides an on-off switch, power
indicator LED, a USB port and extra header pins for
3V and 5V power taps. Maximum output current:
700mA. Coax jack (2.1mm id) for power input. Requires a 6.5 - 9 Vdc power supply. 32 x 54 x 25mm
(1.26 x 2.08 x 0.86" h.).
CAT# MB-PS
$6.75 each
TEST CLIPS FOR BREADBOARDS
ALLIGATOR CLIP JUMPER WIRE
Alligator clip to machine pin
jumper. 6" long leads. Six piece
set. For use with solderless
breadboards, SIP and
DIP headers.
CAT# TL-14
$5.95 per set
MINI GRABBER JUMPER WIRE
Red and Black mini-grabber to
machine pin jumper. 7" long
leads. Two piece set. For use
with solderless breadboards,
SIP and DIP headers.
CAT# TL-15
$4.50 per set
72
$ 6.25 each
CAT # JW-350
$ 12.95 each
JUMPER WIRE, 10 PACKS
male
female
Simplify projecting and prototyping with this triple-output
power supply and solderless
2420 tie point breadboard.
1 fixed and 2 adjustable
supplies, 5 bus strips and
3 plug-in strips for DIP and
other components.
CAT# PB-4060
CAT # JW-140
350 PIECE ASSORTMENT
Machine pins for easy insertion and extraction.
Can be reused many times without distortion of pin.
Color-coded by length. AWG24. Sold in packs of 10.
50MM (2”) Brown wire
Male-Male
CAT# JMM-50
Male-Female
CAT# JMF-50
Female-Female CAT# JFF-50
$3.00 / 10 pcs
$3.00 / 10 pcs
$3.00 / 10 pcs
70MM (2.75”) Gray wire
Male-Male
CAT# JMM-70
Male-Female
CAT# JMF-70
Female-Female CAT# JFF-70
$3.20 / 10 pcs
$3.20 / 10 pcs
$3.20 / 10 pcs
100MM (4”) Orange wire
Male-Male
CAT# JMM-100
Male-Female
CAT# JMF-100
Female-Female CAT# JFF-100
$3.35 / 10 pcs
$3.35 / 10 pcs
$3.35 / 10 pcs
150MM (6”) Purple wire
Male-Male
CAT# JMM-150 $3.60 / 10 pcs
200MM (8”) Blue wire
Male-Male
CAT# JMM-200
Male-Female
CAT# JMF-200
Female-Female CAT# JFF-200
$3.75 / 10 pcs
$3.75 / 10 pcs
$3.75 / 10 pcs
BATTERY HOLDER FOR BREADBOARDING
Holds 3 AA batteries for
4.5Vdc power. Completely
enclosed with slide-off cover.
Integrated On-Off switch on holder.
6” leads with machined male pins
for use with solderless breadboards.
2.69” x 1.90” x 0.72”.
CAT# BH-AA3
$3.95 each
TEST CABLES & CLIPS
ECONOMY TEST LEADS
Red and black lead set with
banana plug on one end & pin
probe on other end. 3 ft. long.
CAT# TL-100
$2.50 per set
TEST LEADS WITH
PIN PLUGS
Set of red and black test leads
with pin plugs. 22" long cables.
CAT# TL-112
$1.85 set
FAX YOUR ORDER 24 HOURS A DAY (818) 781-2653
Download