Series ZSE1/ISE1 How to Order Operating pressure range/ Setting pressure range Nil L Piping specifications 01 T1 0 to 1 MPa 0 to 100 kPa R 1/8 NPTF 1/8 Note) M5 x 0.8 (female) threaded. Positive pressure ISE1 Vacuum ZSE1 Piping specifications Wiring specifications Grommet type (Lead wire: 0.6 m) 00 For mounting on ZM ejector Nil 01 Single mounting R 1/8 L Grommet type (Lead wire: 3 m) T1 Single mounting NPTF 1/8 C Connector type (Lead wire: 0.6 m) CL Connector type (Lead wire: 3 m) CN Without connector Note) Single mounting style: M5 x 0.8 (female) threaded. Output specifications 14 NPN open collector 1 output w/o analog output, 3 turns adjustment 15 NPN open collector 1 output w/o analog output, 200 degrees adjustment 16 NPN open collector 2 output w/o analog output, 3 turns adjustment 17 NPN open collector 2 output w/o analog output, 200 degrees adjustment 18 NPN open collector 1 output w/analog output, 3 turns adjustment 19 NPN open collector 1 output w/analog output, 200 degrees adjustment 55 16-6-2 PNP open collector 1 output w/o analog output, 200 degrees adjustment With Connector/How to Order Without lead wire (Connector 1 pc., Socket 4 pcs.) ···ZS-20-A With lead wire······························································ZS-20-5ANote) When ordering switch with 5 m long lead wire, indicate both part numbers. Ex.) ZSE1-01-15CN······1 pc. ZS-20-5 A-50·········1 pc. Lead wire length Nil 0.6 m 30 3m 50 5m Compact Pressure Switch Series ZSE1/ISE1 Specifications Operating pressure range/Regulating pressure range Proof pressure Fluid Power supply voltage Current consumption Response time Repeatability Enclosure Operating temperature range Operating humidity range Resistance Vibration resistance Impact resistance Temperature characteristics (Based on 25°C) Withstand voltage Insulation resistance Port size Weight ZSE1 ISE1L ISE1 For vacuum 0 to –101 kPa For low pressure 0 to 100 kPa For high pressure 0 to 1 MPa 1.5 MPa 500 kPa Air/Non-corrosive, non-flammable gas 12 to 24 VDC ±10%, Ripple (P-P)10% or less 1 output: 17 mA or less at 24 VDC, 2 output: 25 mA or less at 24 VDC 5 ms or less ±1% F.S. or less IP40 Operating: 0 to 60°C, Stored: –10 to 60°C (With no condensation) Operating/Stored: 35 to 85%RH (With no condensation) 10 to 500 Hz at whichever is smaller of 1.5 mm amplitude or 98 m/s2 acceleration, in X, Y, Z directions for 2 hrs. each (De-energized) 980 m/s2 in X, Y, Z directions, 3 times each (De-energized) ±3% F.S. or less 1000 VAC for 1 min. (Between lead wires and case) 50 MΩ or more (at 500 VDC by megameter) 01: R 8, M5 x 0.8 T1: NPTF 1/8, M5 x 0.8 00: ZM ejector mount type Approx. 40 g (Including 0.6 m—Long lead wire) Output type Residual voltage Number of outputs Hysteresis Indicator light Trimmer adjustment Analog output PSE Z I SE3 PS Z I SE 12 ZSP ISA2 IS Output Specifications Model ZSE ISE -14 -16 -17 -18 -19 -55 PNP open collector NPN open collector 30 V, 80 mA 80 mA 1 V or less (With load current of 80 mA) 1 1 2 1 to 10% of set prss. 3% F.S. or less 1 to 10% of set prss. 1 to 10% of set press. (Adjustable) (Variable) (Fixed) (Variable) ON: when output is ON ON: when output is ON ON: when output is ON (Red) (Red) (OUT1: Red, OUT2: Green) 3 turns -15 200 degrees None 3 turns 200 degrees 3 turns 200 degrees 1 to 5 V ±5% F.S. Output impedance: Approx. 1 kΩ None 16-6-3 ZSM PF2 IF Data Series Compact Pressure Switch ZSE1/ISE1 Dimensions Connector type: ZSE1-00-14C/-15C/-18C/-19C 15 L HL HYS H 23.4 23 PSE Pressure setting trimmer 2 Z I Pressure setting trimmer 1 600 (3000) SE3 PS 600 (3000) Pressure setting trimmer 1 ZSE ISE 23.4 23 Indicator light (Red, Green) SET1 SET2 L HL H Pressure setting trimmer 2 Pressure setting trimmer 15 15 Indicator light (Red, Green) Hysteresis setting trimmer SET1 SET2 L HL H SET Pressure setting trimmer H Hysteresis setting trimmer 23 HYS 15 Indicator light (Red) HL 23.4 23 Indicator light (Red) SET Grommet type: ZSE1-00-14/-15/-18/-19 Z I SE 12 ZSP — +21 79.8 Pressure supply port ø2 PF2 6 27 27 2-M2.5 x 24L Mounting threads 2-M2.5 x 24L Mounting threads IS ZSM 21 21 6 Pressure supply port ø2 O-ring 30 9.5 O-ring 30 9.5 72 . 3 40 40 ISA2 IF Data Connector type: I 01 Z SE1- T1 -14C/-15C/-18C/-19C Grommet type: I 01 Z SE1- T1 -14/-15/-18/-19 Pressure setting trimmer Hysteresis setting trimmer H L L Hysteresis setting trimmer SET H Pressure setting trimmer 2 15 L 15 SET2 H L L SET2 H L 600 (3000) 56.5 47 600 (3000) Piping port M5 x 0.8 depth 5 01: R 1/8 T1: NPTF 1/8 2-ø3.5 Mounting hole 8.5 3.5 49 47 13 Indicator light (Red, Green) Indicator light (Red, Green) 8.5 3.5 2-ø3.5 Mounting hole H H 23 23 Indicator light (Red) I Z SE1-01-16C/-17C Pressure setting trimmer 1 Pressure setting trimmer 2 SET1 SET1 H 23 SE1-01-16/-17 Pressure setting trimmer 1 HYS H L L Indicator light (Red) 23 I Z Pressure setting trimmer HYS 15 15 SET 13 Piping port M5 x 0.8 depth 5 01: R 1/8 T1: NPTF 1/8 16-6-5