Resistors Precision Chip Array Precision Chip Array PCA Series PCA Series Precision thin film technology Four elements in 1206 footprint Precision thin film technology Tight tolerance down to ±0.1% Four elements in 1206 footprint Low TCR down to ±10ppm/°C Tight tolerance down to ±0.1% Better TCR tracking and tolerance matching than using discrete parts Low TCR down to ±10ppm/°C Better TCR tracking and tolerance matching than using discrete parts All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Data Electrical Data rating resistor @70°C PowerPower rating per per resistor @70°C Limiting element voltage Limiting element voltage Maximum overload voltage Maximum overload voltage Resistance range Resistance range Resistance tolerance Resistance tolerance Matching tolerance Matching tolerance TCR TCR Tracking TCR Tracking TCR Standard values Standard values Ambient temperature range Ambient temperature range PCA164 PCA164 0.0625 0.0625 50 50 100 100 24R9 – 100K 24R9 – 100K ±1, ±0.5, ±0.25, ±0.1, ±1, ±0.5, ±0.25, ±0.1, ±0.5, ±0.25, ±0.1 ±0.5, ±0.25, ±0.1 ±50, ±25, ±15, ±10 ±50, ±25, ±15, ±10 ±50, ±25, ±15 ±50, ±25, ±15 E96 E96 -55 to +155 -55 to +155 watts watts volts volts ohms % % ppm/°C ppm/°C volts volts ohms % % ppm/°C ppm/°C °C °C Physical Data Physical Data Dimensions mmand and weight in mg Dimensionsin in mm weight in mg Type Type L L W W 3.20 1.60 1.60 PCA1643.20 ±0.15 ±0.15 PCA164 ±0.15 ±0.15 H H a 0.55 0.55 ±0.1 ±0.1 0.50 0.50 ±0.15 a ±0.15 b b c c y Wt. y nom 0.80 0.80 0.300.300.30 0.309.0 ±0.05 ±0.15 ±0.15 ±0.05 ±0.15 ±0.15 Wt. nom 1002 9.0 Marking Marking 4-digit marking is used on the component. E.g. 1002 = 10kΩ. All relevant information is recorded on the primary pack4-digitage marking is used on the component. E.g. 1002 = 10KΩ. All relevant information is recorded on the primary package or or reel. reel. Solvent Resistance Solvent TheResistance component is resistant to all normal industrial cleaning solvents suitable for printed circuits. The component is resistant to all normal industrial cleaning solvents suitable for printed circuits. Construction Construction A thin-film material is selectively deposited on an alumina substrate together with metallic contacts at each end of the A thin-film material is selectively deposited on an alumina substrate together with metallic contacts at each end of the resistor. The unadjusted resistors are heat treated to give the required TCR and stability, and then a precisely controlled resistor. The unadjusted are resistance heat treated to give the required TCRis and stability, then a precisely controlled laser trim process resistors adjusts the value. Epoxy protection applied and and wrap-around terminations are added laser trim process adjusts the resistance value. Epoxy protection is applied and wrap-around terminations are added and and plated with nickel then tin. Each resistor is measured immediately before packing into tape. plated with nickel then tin. Each resistor is measured immediately before packing into tape. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. BI Technologies IRC Welwyn www.ttelectronicsresistors.com © TT Electronics plc www.ttelectronicsresistors.com 04.16 Precision Chip Array PCA Precision Series Chip Array Precision Chip Array Series PCA PCA Series Power Resistors Power Resistors Performance Data Performance Data Performance Data Test Load life Test Test ±ΔR% Method 1000 hours rated power @ 70°C ±ΔR% ±ΔR% Maximum Typical Typical Maximum 0.15Maximum Typical Method Method 0.05 power @ 70°C LoadLoad life life 10001000 hourshours ratedrated power @ 70°C Humidity 1000 hours @40°C, 90-95% RH 0.05 1000 hours @40°C, 90-95% Humidity 1000 hours @40°C, 90-95% RH RH Humidity Short term overload of Lesser 6.25 rated power & max. overload voltage forvoltage 5 secs Short term overloadLesser of 6.25 x rated power & max. overload voltage 50.01 secs Short term overload Lesser of x6.25 x rated power & max. overload for 5for secs Temperature 100 cycles -55°C to +150°C Temperature cyclecycle 100 100 cycles -55°C to +150°C Temperature cycle cycles -55°C to +150°C 0.05 Dry heat 1000 hours @ 125°C Dry heat 1000 hours @ 125°C Dry heat 1000 hours @ 125°C 0.10 Resistance to solder 260 ±5°C for 10secs Resistance to solder heat heat 260 ±5°C for 10secs Resistance to solder heat 260 ±5°C for 10secs 0.02 Solderability 245 ±5°C for 3secs Solderability 245 ±5°C for 3secs Solderability 245 ±5°C for 3secs 95% min. coverage Tolerance & TCR Availability Tolerance & TCR Availability Tolerance &Tolerance TCR Availability Availability Absolute Tol. Matching Tol. TCR Availability Resistance Range Absolute TCR Tolerance Availability Tolerance Availability Unspecified Absolute Matching Resistance RangeAbsolute Absolute ±0.1% ±10ppm/°C Absolute Tol. Tol. Matching Tol. Tol.Resistance Range TCR TCR ±0.1% Unspecified Unspecified ±0.1% ±10ppm/°C ±0.1% ±10ppm/°C Unspecified ±0.1% ±0.1% ±15ppm/°C Unspecified Unspecified ±0.25% ±0.25% ±15ppm/°C ±15ppm/°C ±0.25% ±0.25% ±0.25% ±0.25% ±0.1% 24R9 - 100K ±0.1% ±0.1% - 100K ±25ppm/°C 24R924R9 - 100K Unspecified Unspecified ±25ppm/°C Unspecified ±25ppm/°C ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.25% ±0.25% ±0.25% Unspecified ±50ppm/°C Unspecified ±50ppm/°C Unspecified ±50ppm/°C ±1% ±1% ±1% ±0.5% ±0.5% ±0.5% Equivalent Circuit Diagram Equivalent Circuit Diagram Equivalent Circuit Diagram 0.05 0.05 0.15 0.15 0.25 0.05 0.05 0.25 0.25 0.01 0.01 0.10.1 0.1 0.05 0.05 0.25 0.25 0.25 0.10 0.10 0.25 0.25 0.25 0.02 0.02 0.2 0.2 0.2 coverage 95% 95% min. min. coverage Tracking TCR Resistance Range TCR Availability TCR Availability Unspecified Tracking Resistance Range Tracking TCR TCR Resistance Range ±15ppm/°C Unspecified Unspecified 24R9 - 2K0 Unspecified ±15ppm/°C ±15ppm/°C 24R924R9 - 2K0- 2K0 Unspecified Unspecified ±15ppm/°C ±15ppm/°C ±15ppm/°C Unspecified Unspecified Unspecified ±25ppm/°C ±25ppm/°C ±25ppm/°C ±15ppm/°C ±15ppm/°C ±15ppm/°C - 100K 24R9 - 100K 24R924R9 - 100K Unspecified Unspecified Unspecified ±50ppm/°C ±50ppm/°C ±50ppm/°C ±25ppm/°C ±25ppm/°C ±25ppm/°C Recommended Land Pattern Recommended Pattern Recommended LandLand Pattern Dimensions Dimensions mm mm A Dimensions mm PCA164 PCA164 PCA164 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. A B B C A B C C I I I P P P 3.10 3.102.85 2.850.45 0.450.80 0.800.80 0.80 3.10 2.85 0.45 0.80 0.80 BI Technologies IRC Welwyn www.ttelectronicsresistors.com © TT Electronics plc www.ttelectronicsresistors.com 04.16 www.ttelectronicsresistors.com Precision Chip Array Precision Precision Chip Array Chip Array PCA Series PCA Series PCAPower Series Resistors Power Resistors Packaging Packaging Packaging PCA164 is packed in 8mm paper tape 7 inch reel ofa5000 5000 pieces. PCA164 is packed in 8mm tape onof 7 inch reel of 5000 pieces. PCA164 is packed in 8mm paper tape on paper aon7 ainch reel pieces. Dimensions mmB Dimensions mm A A W B E W F E P0 F P1 P0 P2 P1ØD0 P2 T ØD0 T A B W E F P0 P1 P2 ØD0 0.85 1.95 3.50 1.958.0 3.50 1.75 8.03.5 1.754.0 3.54.0 4.02.0 4.01.55 2.00.85 1.55 PCA164 1.95 3.50 8.0 1.75 3.5 4.0 4.0 2.0 1.55 ±0.1 ±0.1 ±0.05 ±0.1 PCA164±0.1 ±0.1 ±0.1 ±0.2 ±0.1 ±0.1 ±0.2 ±0.05 ±0.1 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.1 ±0.05 ±0.1 ±0.1 ±0.2 ±0.1 ±0.05 ±0.1 ±0.05 ±0.05 ±0.05 Dimensions mm PCA164 T 0.85 ±0.1 Ordering Procedure Ordering Procedure Ordering Procedure Example: PCA164CD-4K75CBT5 (PCA164 with TCRabsolute of 50ppm/°C absolute and 25ppm/°C tracking, 4.75 kilohms, Example: PCA164CD-4K75CBT5 (PCA164 with TCR of 50ppm/°C and 25ppm/°C tracking, 4.75 kilohms, Example: PCA164CD-4K75CBT5 (PCA164 with TCR of 50ppm/°C absolute and 25ppm/°C tracking, 4.75 tolerance of 0.25% absolute and 0.1% ratio, 5000 reel, Pb-free) tolerance of 0.25%tolerance absoluteofand 0.1% ratio, and 5000 reel, Pb-free) kilohms, 0.25% absolute 0.1% ratio, 5000 reel, Pb-free) P C 1P A 6C 4A C1 12 1 D6 -4 3 4C 2 1 21 2 3 Type TypeTCR Absolute Absolute TCRTCR1 Tracking PCA164 PCA164 T = Y±10ppm/°C T = ±10ppm/°C = ±15ppm/°C ±15ppm/°C Y = ±15ppm/°C Y = D = ±25ppm/°C D = ±25ppm/°C D = C±25ppm/°C = ±50ppm/°C C = ±50ppm/°C C = ±50ppm/°C KD 7- 34 54 CK B7 5 46 T5 5C B 7 5 6 3 4 45 Absolute Tracking TCR1 Value Value Tolerance Y =3/4 ±15ppm/°C = ±0.1% characters 3/4Bcharacters D = ±25ppm/°C ohms R = ohms CR==±0.25% KD= =kilohms C = ±50ppm/°C K = kilohms ±0.5% F = ±1% T 5 7 65 Absolute Ratio Tolerance1 Tolerance ±0.1% BB == ±0.1% ±0.25% CC == ±0.25% ±0.5% DD == ±0.5% F = ±1% 67 Ratio Packing1 Tolerance 7 Packing ±0.1% T5 = 5000/reel T5B == 5000/reel C = ±0.25% D = ±0.5% Note – Optional characters. See Tolerance and TCR Availability table fortable validfor combinations. Note 1 – Optional characters. Tolerance and TCRfor Availability valid combinations. Note 1 –1Optional characters. See Tolerance andSee TCR Availability table valid combinations. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. BI Technologies IRC Welwyn www.ttelectronicsresistors.com www.ttelectronicsresistors.com www.ttelectronicsresistors.com © TT Electronics plc 04.16