Page 1 of 4 SECTION 11 1723
CRL STAINLESS STEEL DEAL TRAYS
PART 1 - GENERAL
1.1
SUMMARY
A.
1.2
RELATED SECTIONS
A.
B.
C.
D.
E.
F.
G.
1.3
B.
Through the design, manufacturing techniques, and material application CRL
Deal Trays shall be designed to permit passing of materials under transaction
windows without sacrificing security. Each transaction position shall have a
stainless steel deal tray as shown on the drawings. Components must be
manufactured in strict accordance with the specifications, design, and details.
SUBMITTALS
A.
B.
Underwriters Laboratory UL 752 – Standard Specification for Bullet Resisting
Components.
NIJ Standard 0108.01- (National Institute of Justice) Standard for Ballistic
Resistant Protective Materials.
DESCRIPTION
A.
1.5
Section 06 2000 - Finish Carpentry
Section 08 5113 - Aluminum Windows
Section 08 5653 - Security Windows
Section 08 8000 - Glazing
Section 08 8853 - Security Glazing
Section 13 0000 - Special Construction
Section 27 0000 – Communications
REFERENCE STANDARDS [For Bullet Resistant Models]
A.
1.4
Deal Trays are made of heavy gauge stainless steel and provide for secure
transactions.
C.
Submit under provisions of Section 01 3300.
Shop Drawings: Dimensioned drawings of CRL Deal Trays indicating the
following:
1.
Counter top cut outs.
2.
Manufacturer’s installation and maintenance instructions.
All required submittals shall be approved prior to installation.
083012 – CRL 11 1723 Stainless Steel Deal Trays Page 2 of 4 1.6
QUALITY ASSURANCE
A.
B.
1.7
DELIVERY, STORAGE, AND HANDLING
A.
B.
C.
1.8
Manufacturer shall be a company that specializes in manufacturing products of
the specified type with a minimum of five years experience. Installer shall be
a company that specializes in product type specified.
All components and fittings are furnished by the same manufacturer.
Deliver materials properly protected against damage during transit.
Inspect materials upon delivery for damage. Unless minor defects can be made to
meet the Architect’s specifications and satisfaction, damaged parts should be
removed and replaced.
Store materials at a secure building site under cover in dry location.
WARRANTY
A.
All materials shall be warranted against defects for a period of one year from the
date of receipt at the project site.
PART 2 - PRODUCTS
2.1
MANUFACTURERS
A.
Products shall be manufactured by:
C.R. Laurence (CRL)
Tel: (800) 421-6144 Ext. 7760 Fax: (800) 458-7496
Email: transaction@crlaurence.com
www.crlaurence.com
www.crl-arch.com
2.2
MODELS [Specify One]
A.
Drop in Deal Trays:
1.
Standard CTD Series, [polished stainless] [#4 brushed stainless] 16 gauge:
a.
[8 x 10 x 1-9/16 inches (203 x 254 x 39 mm)]
b.
[12 x 10 x 1-9/16 inches (305 x 254 x 39 mm)]
c.
[16 x 10 x 1-9/16 inches (406 x 254 x 39 mm)]
2.
Deluxe Series, #4 brushed stainless, 16 gauge:
a.
[12 x 14-1/8 x 2-3/8 inches (305 x 359 x 60 mm)]
b.
[18 x 14-1/8 x 2-3/8 inches (457 x 359 x 60 mm)]
083012 – CRL 11 1723 Stainless Steel Deal Trays Page 3 of 4 B.
C.
c.
[24 x 14-1/8 x 2-3/8 inches (610 x 359 x 60 mm)]
3.
Deep Series, #4 brushed stainless, 16 gauge:
a.
14 x 14 x 3 inches (355 x 355 x 76 mm)
4.
Deep Series With Sliding Lid, #4 brushed stainless, 16 gauge:
a.
14 x 14 x 3 inches (355 x 355 x 76 mm)
5.
Recessed Deal Tray With Flip Lid, #4 brushed stainless, 16 gauge:
a.
14-3/4 x 16-11/16 x 2-3/4 (375 x 424 x 70 mm)
Non-Ricochet Bullet Resistant Drop in Deal Trays:
1.
Level 1 Series, #4 brushed stainless, 14 gauge:
a.
[12 x 11 x 1-3/4 inches (305 x 279 x 44 mm)]
b.
[16 x 11 x 1-3/4 inches (406 x 279 x 44 mm)]
2.
Level 3 Series, #4 brushed stainless, 7 gauge (pan only):
a.
[12 x 12 x 2 inches (305 x 305 x 51 mm)]
b.
[16 x 12 x 2 inches (406 x 305 x 51 mm)]
Counter Top Deal Trays
1.
Standard CTC Series, #4 brushed stainless, 16 and 11 gauge:
a.
[12 x 10 x 2 inches (305 x 254 x 51 mm)]
b.
[16 x 10 x 2 inches (406 x 254 x 51 mm)]
2.
Counter Top Deal Tray With Flip Lid, #4 brushed stainless, 16 gauge:
a.
12-1/4 x 13 x 2-5/8 (311 x 330 x 67 mm)
PART 3 – EXECUTION
3.1
EXAMINATION
A.
B.
3.2
INSTALLATION
A.
3.3
Do not begin installation until openings have been verified and surfaces
properly prepared in accordance with drawings. Install in accordance with
manufacturer’s instructions.
CLEANING
A.
Prior to installing the Deal Trays, the contractor shall verify that all supports have
been installed as required by the contract documents and architectural drawings,
and approved shop/CAD drawings, if required. Installer shall notify architect of
any unsatisfactory preparation that is responsibility of another installer.
Clean and prepare all surfaces per manufacturers recommendations for achieving
the best results for the substrate under the project conditions.
B.
Clean surfaces after installation, complying with requirements contained in
the manufacturer’s instructions. Remove excess glazing sealant compounds,
decals, dirt or other substances.
Remove protective films from metal surfaces.
083012 – CRL 11 1723 Stainless Steel Deal Trays Page 4 of 4 3.4
PROTECTION
A.
B.
Institute protective measures required throughout the remainder of the
construction period to ensure that all the materials do not incur any damage or
deterioration.
Repair components damaged by subsequent construction activities in accordance
with manufacturer’s recommendations; replace damaged components that cannot
be repaired to Architect’s acceptance.
-END OF SECTION-
083012 – CRL 11 1723 Stainless Steel Deal Trays