DATASHEET PV-MODULE SM-PV2.0 All assets at one view Roof style remains preserved Due to the full integration of each solar module into each single clay tile, the typical roof style shape can be preserved. Easy installation The module is fixed with a simple clip to the clay tile. No special tools are needed for installation. Protection of historical heritage Due to the complete integration of the solar tile into the roof, the present solution may also be possible to be mounted on protected historical heritage buildings. This unique solar energy solution uses the power of the sun and let it be easily integrated with its clear structure and reduced shape into each clay roof. The most beautiful way to produce environmental friendly energy. SM-PV2.0 with panotron Solar-F black and brown Warranty and certificates Warranty 2 years of warranty 90% of rated minimum PMPP for 10 years 80% of rated minimum PMPP for 20 years Certification IEC 61215 (application class A) IEC 61730 (protection class II) IEC 61215 IEC 61730 Periodical Inspection SM-PV2.0 with panotron Solar-F black, 7.2 kWp DATASHEET PV-MODULE SM-PV2.0 Electrical data (STC) Electrical Data (NOCT) Nominal power (±5%) PMPP 25.0 Wp Nominal power (±5%) PMPP 18.6 Wp Voltage at nom. power UMPP 40.3 V Voltage at nom. power UMPP 37.1 V Current at nom. power IMPP 620 mA Current at nom. power IMPP 501 mA Open curcuit voltage UOC 49.4 V Open curcuit voltage UOC 44.5 V Short circuit current ISC 642 mA Short circuit current ISC 529 mA Efficiency η 12.0 % Max. system voltage Max. reverse current Normal Operatin Cell Temperature (NOCT): Irradiation: 800W/m2, ambient temperature: 20°C, Wind speed: 1 m/s 1000 V 860 Tested Operating Conditions mA Standard Test Conditions (STC): Irradiation: 1000W/m2, Celltemperatur: 25°C, Spectrum: AM 1.5 Temperature Coefficiency Nominal power PMPP -0.4980 %/K Open curcuit voltage UOC -0.3925 %/K Short circuit current ISC +0.0611 %/K Temperature - 40°C to +85°C Impact resistance hail - 25 mm to 23.1 m/s I-U Characteristic Cell temperature: 25°C Mechanical Data PV cell Monocrystalline Cells per module 4 x 20 Dimensions (L x W x D) 4 x (373x155x9)mm Weight 2.8 kg Connection cable 290 mm Connection type Amphenol H4 Front cover Non-reflective glass Back cover Film composit Frame material Plastic Your installation partner: 373mm 422mm Dimensions 155mm NOTE: READ INSTALLATION AND OPERATING INSTRUCTIONS BEFORE COMMISSIONING