HMC853LC3C
v00.0909
3
28 Gbps, D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Typical Applications
Features
The HMC853LC3C is ideal for:
Differential & Singe-Ended Operation
• RF ATE Applications
Fast Rise and Fall Times: 15/14 ps
• Broadband Test & Measurement
Low Power Consumption: 240 mW typ.
• Serial Data Transmission up to 28 Gbps
Programmable Differential
Output Voltage Swing: 700 - 1300 mV
HIGH SPEED LOGIC - SMT
• Digital Logic Systems up to 28 GHz
Single Supply: -3.3V
16 Lead Ceramic 3x3mm SMT Package: 9mm2
Functional Diagram
General Description
The HMC853LC3C is a D-type Flip Flop designed to
support data transmission rates of up to 28 Gbps, and
clock frequencies as high as 28 GHz. During normal
operation, data is transferred to the outputs on the
positive edge of the clock. Reversing the clock inputs
allows for negative-edge triggered applications. The
HMC853LC3C also features an output level control pin,
VR, which allows for loss compensation or for signal
level optimization.
All input signals to the HMC853LC3C are terminated
with 50 Ohms to ground on-chip, and maybe either
AC or DC coupled. The differential outputs of the
HMC853LC3C may be either AC or DC coupled. Outputs can be connected directly to a 50 Ohm to ground
terminated system, while DC blocking capacitors
may be used if the terminating system is 50 Ohms to a
non-ground DC voltage. The HMC853LC3C operates
from a single -3.3V DC supply and is available in a
ceramic RoHS compliant 3x3 mm SMT package.
Electrical Specifications, TA = +25°C, Vee = -3.3V, VR = 0
Parameter
Conditions
Power Supply Voltage
Min.
Typ.
Max
-3.6
-3.3
-3.0
Power Supply Current
V
73
mA
Maximum Data Rate
28
Gbps
Maximum Clock Rate
28
GHz
Input Voltage Range
-1.0
+0.5
Input Differential Voltage
0.1
2.0
Input Return Loss, Output Return Loss
Output Amplitude
Output High Voltage
3-1
Units
Frequency <24 GHz
V
V
10
dB
Single-Ended, peak-to-peak
550
mVp-p
Differential, peak-to-peak
1100
mVp-p
-10
mV
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC853LC3C
v00.0909
28 Gbps, D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Electrical Specifications, (continued)
Conditions
Min.
Typ.
Output Low Voltage
Max
Units
-570
Output Rise / Fall Time
Output Return Loss
mV
Differential, 20% - 80%
15 / 14
ps
Frequency <24 GHz
10
dB
Random Jitter Jr
rms
0.2
peak-to-peak, 215 -1 PRBS input [1]
Deterministic Jitter, Jd
ps rms
2
Propagation Delay Clock to Data, td
ps, p-p
101
ps
300
deg
Set Up Time, ts
4
ps
Hold Time, th
3
ps
Clock Phase Margin
28 GHz
DC Current vs. Supply Voltage
Output Differential
vs. Supply Voltage [1] [2]
[1] [2]
1500
100
95
DC CURRENT (mA)
90
85
DIFFERENTIAL VOLTAGE (mV)
+25C
+85C
-40C
Vr= +0.4
Vr= -0.4
80
75
70
65
60
55
50
-3.7
-3.6
-3.5
-3.4
-3.3
-3.2
-3.1
-3
1400
1300
1200
1100
1000
900
800
+25C
+85C
-40C
Vr= +0.4
Vr= -0.4
700
600
500
-3.7
-2.9
-3.6
SUPPLY VOLTAGE (V)
-3.5
-3.4
3
-3.3
-3.2
-3.1
-3
HIGH SPEED LOGIC - SMT
Parameter
-2.9
SUPPLY VOLTAGE (V)
Output Differential vs. VR [2]
DIFFERENTIAL VOLTAGE (mV)
1500
1400
1300
+25C
+85C
-40C
1200
1100
1000
900
800
700
600
500
-1.2
-1
-0.8
-0.6
-0.4
-0.2
0
0.2
0.4
VR (V)
[1] VR = 0.0V
[2] Frequency = 13 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3-2
HMC853LC3C
v00.0909
28 Gbps, D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Rise / Fall Time vs. Supply Voltage [2]
Rise / Fall Time vs. VR [2]
20
tr
tf
16
14
12
16
14
12
10
-3.7
-3.6
-3.5
-3.4
-3.3
-3.2
-3.1
-3
10
-1.2
-2.9
-1
-0.8
-0.6
-0.4
-0.2
0
0.2
0.4
VR (V)
SUPPLY VOLTAGE (V)
Input Return Loss vs. Frequency [3]
Output Return Loss vs. Frequency [3]
0
0
Eval Board
Device
Eval Board
Device
-5
RETURN LOSS (dB)
-5
-10
-15
-20
-25
-10
-15
-20
-25
-30
-30
0
3
6
9
12
15
18
FREQUENCY (GHz)
[1] VR = 0.0V
3-3
tr
tf
18
RISE/FALL TIME (ps)
RISE/FALL TIME (ps)
18
RETURN LOSS (dB)
HIGH SPEED LOGIC - SMT
3
20
[2] Frequency = 13 GHz
21
24
27
0
3
6
9
12
15
18
21
24
27
FREQUENCY (GHz)
[3] Device measured on evaluation board with single-ended time domain gating.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC853LC3C
v00.0909
28 Gbps, D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Eye Diagram @ 25 Gbps
Conditions
Bit Rate
24.9900 Gbps
Pattern Length
127 Bits
DJ (d-d)
2.0 ps
Vertical Scale
100 mV / div
Time Scale
6.7 ps / div
Test Conditions:
Pattern generated with a 27-1 PN generator at 25 GHz.
Measured using an Agilent 86100C 33 GHz DCA.
Single ended 550 mV data and 400 mV clock inputs.
Timing Diagram
tc =
3
HIGH SPEED LOGIC - SMT
Parameter
I
fclock
tSH = Setup and Hold Time
CPM = Clock Phase Margin = 360°
tc - tSH
tc
Truth Table
Input
Outputs
D
C
L
L -> H
L
H
L -> H
H
Notes:
D = DP - DN
C = CP - CN
Q = QP - QN
Q
H - Positive Difference Voltage
L - Negative Difference Voltage
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3-4
HMC853LC3C
v00.0909
28 Gbps, D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Absolute Maximum Ratings
HIGH SPEED LOGIC - SMT
3
Power Supply Voltage (Vee)
-3.75V to +0.5V
Input Signals
-2V to +0.5V
Output Signals
-1.5V to +1V
Storage Temperature
-65°C to +150°C
Operating Temperature
-40°C to +85°C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. PADDLE MUST BE SOLDERED TO Vee.
3-5
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC853LC3C
v00.0909
28 Gbps, D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Pin Descriptions
Function
Description
1, 4, 5, 8, 9, 12
GND
Signal Grounds
2, 3
DN, DP
Data Inputs
6, 7
CP, CN
Clock Inputs
10, 11
QP, QN
Data Outputs
13, 16
GND
Supply Ground
14
VR
Output level control. Output level may be
increased or decreased by applying a voltage to VR per
“Output Differential vs. VR” plot.
15, Package
Base
Vee
This pin and the exposed paddle must be
connected to the negative voltage supply.
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3
HIGH SPEED LOGIC - SMT
Pin Number
3-6
HMC853LC3C
v00.0909
28 Gbps, D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Evaluation PCB
HIGH SPEED LOGIC - SMT
3
Item
Description
J1
DN
J2
DP
J3
CP
J4
CN
J5
QP
J6
QN
J7
Vee
J8
VR
J9
GND
List of Materials for Evaluation PCB 125614 [1]
Item
Description
J1 - J6
PCB Mount K RF Connectors
J7 - J9
DC Pin
C1, C2
100 pF Capacitor, 0402 Pkg.
C3, C4
4.7 µF Capacitor, Tantalum
R1
10 Ohm Resistor, 0603 Pkg.
U1
HMC853LC3C
High Speed Logic, D-Type Flip-Flop
PCB [2]
125612 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR
3-7
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground leads should be connected directly to the
ground plane similar to that shown. The exposed
metal package base must be connected to Vee. A
sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC853LC3C
v00.0909
28 Gbps, D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Application Circuit
HIGH SPEED LOGIC - SMT
3
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3-8