Test and Measurement Equipments
Multiple Power Supply
100 MHz 1GS/s color digital storage oscilloscope with FFT
for
Electronics and Telecommunication Engineering
Dr. BABASAHEB AMBEDKAR TECHNOLOGICAL
UNIVERSITY, LONERE - 402 103
TAL. MANGAON, DIST. RAIGAD (Maharashtra)
Technical specification
Test and Measurement equipments
1) 20 MHz DDS Function Generator
100MSa/s sampling rate , 12 bit resolution, USB interface,
support to external modulation source, Synchronization signal output, External trigger input.
Frequency range of waveform: Sine wave: 1µHz~20MHz, Square wave: 1µHz~5MHz, Sawtooth
wave: 1mHz~ 1MHz, Arbitrary wave:1mHz~1MHz,
AM modulation:
carrier: Sine, Square, Saw-tooth, Pulse, Arbitrary; Type: Internal or external, AM
depth:0%~120%, Modulation frequency: 5Hz~50KHz
FM modulation:
Carrier: Sine, Square, Saw-tooth, Pulse, Arbitrary; Modulation frequency: 5Hz~50KHz, FM
deviation: FC~20MHz
Keying characteristics: ASK, FSK, PSK
Sweep characteristics:
carrier: Sine, Square, Saw-tooth, Pulse, Arbitrary; Type: Linear or logarithmic,
Power supply voltage : AC220 V, 50 Hz
Display: LCD TFT
2) Multiple DC Power supply
0-30V/1A, 4-6 V/1A, 0 to +/- 15 V/1A, Three floting, independent DC supply voltages, DC
outputs : 0-30 V, 0±15 V( dual tracking) and 5V 1A each constant voltage and constant current
operation, digital display for voltage and current selectable display for voltage & current,
adjustable current limiter three floating independent DC supply voltages.
3) 100 MHz 1GS/s Colour Digital Storage Oscilloscope with FFT
Bandwidth: DC- 100 MHz, Channel: 2, Bandwidth Limits: 1GS/s, Sample Mode : Real Time,
Time base range : 4ns/div~80s/div, Time base accuracy:±50ppm, Display Type: 7 inch LCD
colour (800X480 pixels or above).
Inputs: Mode: Sample, peak detect, averaging; Input coupling: DC,AC, GND; Input impedance:
1MΩ±2%; Probe attenuation factors: 1X, 10X, 100X,1000X
Vertical resolution : 8 bit s, Vertical sensitivity: 2Mv/div ~ 5V/div (input to BNC), Accuracy :±
3%
Trigger Source : CH1, CH2, Line, External; Trigger Modes: Auto, Normal, Single, Edge. Interface
: USB;
Measurement system: Automatic measurement facility, FFT window : Hanning, Hamming,
Blackman, Rectangle
Power supply: AC 230 V, 50Hz
Schedule B
Sr.
No.
01
Item
Quantity
Test and Measurement equipments
20 MHz DDS Function Generator
100MSa/s sampling rate , 12 bit resolution,
USB interface,
support to external modulation source,
Synchronization signal output, External
trigger input.
Frequency range of waveform: Sine wave:
1µHz~20MHz, Square wave: 1µHz~5MHz,
Sawtooth wave: 1mHz~ 1MHz, Arbitrary
wave:1mHz~1MHz,
AM modulation:
carrier: Sine, Square, Saw-tooth, Pulse,
Arbitrary; Type: Internal or external, AM
depth:0%~120%, Modulation frequency:
5Hz~50KHz
FM modulation:
02
Rate
Amount
Carrier: Sine, Square, Saw-tooth, Pulse,
Arbitrary;
Modulation
frequency:
5Hz~50KHz, FM deviation: FC~20MHz
Keying characteristics: ASK, FSK, PSK
Sweep characteristics:
carrier: Sine, Square, Saw-tooth, Pulse,
Arbitrary; Type: Linear or logarithmic,
Power supply voltage : AC220 V, 50 Hz
Display: LCD TFT
Schedule B
Sr.
No.
01
Item
Quantity
Multiple DC power supply
0-30V/1A, 4-6 V/1A, 0 to +/- 15 V/1A,
Three floting, independent DC supply
voltages, DC outputs : 0-30 V, 0±15 V( dual
tracking) and 5V 1A each constant voltage
and constant current operation, digital
display for voltage and current selectable
display for voltage & current, adjustable
current limiter three floating independent
DC supply voltages.
05
Rate
Amount
Rate
Amount
Schedule B
Sr.
No.
01
Item
Quantity
100 MHz 1GS/s Colour Digital Storage
Oscilloscope with FFT
Bandwidth: DC- 100 MHz, Channel: 2,
Bandwidth Limits: 1GS/s, Sample Mode :
Real
Time,
Time
base
range
:
4ns/div~80s/div,
Time
base
accuracy:±50ppm, Display Type: 7 inch LCD
colour (800X480 pixels or above).
02
Inputs: Mode: Sample, peak detect,
averaging; Input coupling: DC,AC, GND;
Input impedance: 1MΩ±2%;
Probe
attenuation factors: 1X, 10X, 100X,1000X
Vertical resolution : 8 bit s, Vertical
sensitivity: 2Mv/div ~ 5V/div (input to
BNC), Accuracy :± 3%
Trigger Source : CH1, CH2, Line, External;
Trigger Modes: Auto, Normal, Single, Edge.
Interface : USB;
Measurement
system:
Automatic
measurement facility, FFT window :
Hanning, Hamming, Blackman, Rectangle
Power supply: AC 230 V, 50Hz
Seal & Signature of Supplier
NOTE:
01. The Rates quoted must be in accordance with detailed technical
specifications.
02. The rates quoted are inclusive of all taxes, packing and
forwarding charges and freight charges etc.