Technical Data
Power Packs
PART No.
FEATURES
WP-PP20-D
1-Pole 120-277VAC
• Designed for use with Diversa Load Voltage
occupancy sensors and
• 120-277 VAC
Diode Pulse relays.
or
• 347 VAC
• Single pole or 2 pole units
WP-PP20-2P-D
2-Pole 120/277VAC
• 120-277 VAC or 347 VAC
available
WP-PP20-347-D
1-Pole 347VAC
SPECIFICATION
• Class 1 Source
• 60 Hz
Switching Load
• 120-277 VAC
or
• 347 VAC
Operation
The WP-PP20-D series of Power Packs work in conjunction with the Diversa Low Voltage
Sensors by providing power to the sensors and receiving on/off commands from the
sensor.
Line-voltage ratings include 120-277 and 347.
Contact Load Rating
Contact Rating (1P PPK & each pole of 2P PPKs)
Voltage
General
Tungsten
Ballast
120V
20A
20A
20A
277V
20A
20A
20A
347V
20A
-
15A
All Power Packs provide a 24 VAC Class 2 source for use with the Low Voltage Diversa
Sensors and other Diode Pulse devices. All switches or loads required to be supported by
the sensor must be included in the loading capacity of the Power Pack.
Maximum Load Per Input
Voltage
Ckt Class
Max # of linked
sensors
24VAC
Class 2
12
• See Table for contact rating
• Use #14 AWG Wire
Inputs
• Diode Pulse
• #18AWG wire
Output Power Source
• 24 VAC, 150 mA
• Class 2
• #18AWG wire
Approvals
• FCC
• Title 24
Environment
• Indoors, stationary, non-vibrating, noncorrosive atmosphere and noncondensing humidity
• Ambient Operating Temperature:
14°F to 140°F (-10°C to 60°C)
• Storage Temperature:
-14°F to 140°F (-25°C to 60°C)
Typical Low Voltage Loads
Device
Part #
Ceiling Mounted Sensor
WOR/WVR
Wall Switch Sensor
WOS/WVS
Wall Mount sensor
WOW/WVW
Diode Pulse Switch
WR-8501
Current (mA)
9.5 mA Standard
14.0 mA w/ Aux Relay
4 mA
R1.3
Occupancy Sensor
www.DouglasLightingControls.com
Details
Power Packs
Wiring Instructions
Terminating wire shall be a minimum of #22 AWG for control power connections and shall be suitably sized to handle the load
ratings below.
Electrical Connections
Power Pack Connections
Dimensions & Mounting
The power pack can be mounted as an appendage to a standard electrical box with an integral, ½” electrical hub. The unit may also
mount within a 4” square deep electrical box.
WP-PP20-D / WP-PP20-347-D
WP-PP20-2P-D
* Application and Performance Specification Information Subject to Change without Notification
R1.3
Occupancy Sensor
www.DouglasLightingControls.com