section
advertisement
SPECIALISED ELECTRICAL EQUIPMENT SECTION APT4 Copyright© Remote Control Technologies Pty Ltd www.rct.net.au sales@rct.net.au Ensure clear front or rear vision for effective equipment operation High Resolution, Heavy Duty Bullet Camera Get a clear view from your mobile equipment with the high resolution, high quality image from the state of the art HAD II IT CCD camera. The robust camera comes complete with a ruggedised clamp mount assembly to fit any application. For more information please email: solutions@rct.net.au Specialised Electrical Equipment APT 118 Index Battery and Start Isolation SPECIALISED ELECTRICAL EQUIPMENT APT4 Battery Isolators and Lockouts Electronic Battery Isolator (Programmable) 123 125 3mm Automotive Cable 4mm Automotive Cable 5mm Automotive Cable 6mm Automotive Cable Coaxial Cable Data Cable Flexivolt Cable FVT Tinned Copper Cable HVT Tinned Copper Cable Olflex Cable (Formally Kroflex) Power Cable Starter Cable Trailer Cable 126 127 129 129 130 131 131 132 132 133 135 135 136 Battery Terminals, Clips, Clamps and Accessories Cable Markers Cable Ties and Mounts Glands (Nylon and Metal) P Clamps 136 138 141 142 144 Fibreglass Silicone Sleeving Flexible Conduit (Thick Walled) Heatshrink Nylon Conduit PVC Sleeving 145 146 146 148 148 Bootlace Crimps (Ferrules) Copper Lugs Crimps and Terminals 149 150 152 Cable - Automotive and Specialty Cable Accessories and Mounting Cable Sleeving and Conduit Cable Terminals and Accessories Connectors Anderson155 Din (Hirschmann) 156 Sure Seal 157 Trailer158 Connectors - Military Style (Cannon Plugs) Cannon (Milspec) Cable Joiner - Standard Cannon (Milspec) Cable Mount - 90 Degree - Standard Cannon (Milspec) Cable Mount - Bayonet Cannon (Milspec) Cable Mount - Standard Cannon (Milspec) Dust Caps Cannon (Milspec) Panel Mount - Bayonet Cannon (Milspec) Panel Mount - Standard Consumables 158 159 160 161 162 163 164 Adhesives and Sealants 166 Aerosols167 Conformal Coating, Electrical Grease and Wire Lubricant 169 Solder170 Tapes170 Vapour Guard Capsules 171 SPECIALISED ELECTRICAL EQUIPMEN Index APT4 Deutsch Connectors Deutsch DRC Series Deutsch DRC Series (Seals and Boots) Deutsch DT Series (Grey) Deutsch DT Series Mounting and Boots Deutsch DTHD Series Deutsch DTM Series Deutsch DTM Series Boots Deutsch DTP Series Deutsch HD10 Series Deutsch HD30 Series Deutsch HD30 Series (Locknuts, Washers and Dustcaps) Deutsch Kits (Field Service) Deutsch Pins and Sockets Deutsch Tooling (Crimp Tools) Deutsch Tooling (Removal and Insertion) 172 173 174 177 178 179 181 182 183 184 187 188 189 190 191 Adaptor Boxes Poly and ABS Stainless Steel, Alloy and Metal 192 193 194 Alpha / Numeric LED Fleet Numbers LED Fleet Numbers - Large LED Fleet Numbers - Light Vehicle 195 196 199 Enclosures Fleet Identification - Powerlight General Auto Electrical Circuit Breakers (Klixon) 202 Daytime Headlight System 202 Electronic / Hydraulic Pedals and Actuators 203 Fuses and Fuse Holders 204 Horns205 Siren Modules and Speakers 206 Telemecanique206 Instrumentation (Datcon) Gauges and Senders Instrumentation (Murphy) 208 Cascade Panel 210 Fluid211 Magnetic Relay Switches and Pickups 212 Pressure Electric 212 Pressure Environmentally Sealed Mechanical 213 Pressure Line Kits 213 Pressure Mechanical 214 Senders Pressure Electric 214 Senders Temperature Electric 215 Solenoids215 Temperature Electric 216 Temperature Environmentally Sealed Mechanical 217 Temperature Standard Mechanical 218 Timers219 Volt220 Voltage Reducing Loom 220 Index Instrumentation (VDO) SPECIALISED ELECTRICAL EQUIPMENT APT4 Adaptors and T-Pieces Gauges and Senders 221 222 Tail / Nylon LED Series 223 LED Lamps - Powerlight LED Pilot Lights - Powerlight Constant Illumination (No Load) and Intermittent Illumination (Loaded) 225 Flashing226 Negative Switching 227 Positive Switching 228 Tri-colour229 Ultra Bright 230 Lighting - Beacons Rotating Beacons Strobe Lights Lighting - General 231 232 Globes233 Hella234 Lighting - Halogen Interior Lighting Nordic Halogen 236 236 Nordic HID N200 Series Nordic HID N400 Series Nordic HID N45 Booster Series Zenon HID 237 238 239 240 Compact LED Work Lamp High Output Led Work Lamps LED Bar Lights (Narva) LED Beacons Nordic LED N22, N26 and N460 Series 241 241 242 243 244 VL Alloy Series 245 Angle Sensor Park Brake Warning Timers (Multi Purpose) Voltage Sensing Controllers 246 247 248 249 Greensight Ultrasonic Xtreme Preview Radar System 250 251 Lighting - HID Lighting - LED Lighting - Specialty Machine Monitoring and Timers Rear Detection Rear View Camera Systems - Maxi Vision 10.4" Camera Kits 252 15" Camera Kits 253 19" Camera Kits 254 5" Camera Kits - Heavy Duty 254 7" Camera Kits - Commercial Vehicle 256 7" Camera Kits - Heavy Duty 257 Cameras258 SPECIALISED ELECTRICAL EQUIPMEN Index APT4 Digital Video Recorder 259 Digital Video Recorder Camera Kits 260 Forklift Camera System 262 Looms and Adaptors 263 Monitors264 Mounting Kits and Enclosures 266 Quad Splitter 267 Reducers and Regulators Power Conditioners (Maxi Range) Power Conditioners (Mini Range) Voltage Convertors (Maxi Range) Voltage Convertors (Mini Range) Voltage Reducers and Regulators 267 268 268 269 270 Relays and Bases (Bosch) Relays and Bases (Hella) 271 272 Relays and Bases Senders, Switches and Probes Backup (Mechanical) 272 Coolant Level 273 Flow274 Hall Effect 274 Pressure (Cat Style) 275 Pressure (Hobbs) 275 Pressure (Nason) 276 Proximity278 Temperature (General) 279 Temperature (Kidde-Fenwal) 281 Temperature (Nason) 282 Vacuum283 Solenoids Air Solenoids Continuous Duty, Slave and Heavy Duty Solenoids Dual Battery Solenoids Fuel Pump Syncrostart (Woodward) and Fittings 283 284 285 285 286 Speedlimiters (Groeneveld) 287 Emergency Stop Switches Ignition, Start and Push Button Switches Rocker Switches Toggle Switches, Boots and Covers 287 288 289 290 Speedlimiting Switches Tooling Coaxial Crimp Tools 293 Durst294 Hand, Crimp and Removal 296 Test Equipment 298 Testing and Programming 299 Warning and Reversing Alarms Backup (Preco) Piezo Buzzers 300 301 Battery and Start Isolation Battery Isolators and Lockouts Supplied by a range of manufacturers such as Cole Hersee, Locksafe, Bosch and Lucas, these isolators are a selection of the most reliable and cost effective isolators available. Part No: 4054 Part No: 7738 Part No: 1700 Description: BATTERY ISOLATOR 12V DUAL POLE NO INDEX PIN - COLE HERSEE # 75903 Description: BATTERY ISOLATOR 24V DUAL POLE - COLE HERSEE # 75904 Description: BATTERY ISOLATOR 24V DUAL POLE INDEX PIN - COLE HERSEE # 75910 Part No: 9977 Part No: 9922 Part No: 0041 Description: BATTERY ISOLATOR 24V DUAL POLE KEY TYPE - COLE HERSEE # 75904-03 Description: BATTERY ISOLATOR BOSCH STYLE 4 POLE BOSCH # 0 341 003 004 Description: BATTERY ISOLATOR KIT INCLUDES 1700 & 9617 Part No: 5205 Part No: 1103 Part No: 9617 Description: BATTERY ISOLATOR KIT INCLUDES 1700, 1103 & 4300 Description: LOCKOUT BRACKET RED HINGE STYLE TO SUIT 1700 Description: LOCKOUT BRACKET TO SUIT 1700 - COLE HERSEE # 24505 123 Specialised Electrical Equipment Available in 12 or 24v, single or double pole and suited for universal application. APT Part No: 10358 Part No: 10357 Part No: 5179 Description: LOCKOUT BRACKET RED TO SUIT 1700 - COLE HERSEE # 24505-R Description: LOCKOUT BRACKET YELLOW TO SUIT 1700 - COLE HERSEE # 24505-Y Description: LOCKOUT BRACKET RED TO SUIT 9922 BOSCH ISOLATOR Part No: 10657 Part No: 1941 Part No: 3794 Description: LOCKOUT BRACKET YELLOW TO SUIT 9922 BOSCH ISOLATOR Description: LOCKOUT BRACKET TO SUIT CAT KEY STYLE SWITCH Description: LOCKOUT BRACKET YELLOW HINGE STYLE TO SUIT 1700 Part No: 4300 Description: MOUNT BRACKET RIGHT ANGLE TO SUIT 1700 Specialised Electrical Equipment APT 124 Battery and Start Isolation Electronic Battery Isolator (Programmable) The AusProTec™ Electronic Battery Isolator (Programmable) or EBI Pro is a revolutionary dual battery control device. Based on the solid foundation of our ground-breaking Programmable Voltage Sensing Relay (PSR) the EBI Pro has been designed to withstand the toughest of conditions. Unlike conventional electro-mechanical isolators, the EBI Pro is solid state. Solid state means that there are no moving parts. That is, no contacts to vibrate, chatter, arc, wear and ultimately fail. The MOSFET based topology of the EBI Pro is proven. Reliability, durability and longevity are built in. The EBI Pro is also adjustable in terms of voltage and time delay. This provides the installer with the means to customise the EBI Pro for the application rather than suffer the ‘one size fits all’ philosophy from manufacturers of traditional devices. Part No: 11272 Part No: 11273 Description: ELECTRONIC BATTERY ISOLATOR 12V EBI PRO Description: ROCKER SWITCH TO SUIT 11272 Specialised Electrical Equipment Specifically manufactured to withstand harsh conditions, this unit has been designed for under bonnet installations and will run 100 Amps continuously at 60°C. 125 APT Cable - Automotive and Specialty 3mm Automotive Cable The AusProTec™ range of cables has been included to complement our constantly expanding consumables list. 3mm Automotive: General purpose cable for automotive applications, for low voltage, high amperage wiring. • Conductor: Plain annealed copper wire • Insulator / Sheath: PVC V75 • Voltage 100VDC (not suitable for connections to mains power) • Stranding: 16 x 0.30mm • Roll Size: 100m Specialised Electrical Equipment Part No: 1159 Part No: 2566 Part No: 2562 Description: 3MM AUTOMOTIVE CABLE BLACK Description: 3MM AUTOMOTIVE CABLE BLACK / GREEN Description: 3MM AUTOMOTIVE CABLE BLACK / RED Part No: 5853 Part No: 2547 Part No: 8321 Description: 3MM AUTOMOTIVE CABLE BLACK / WHITE Description: 3MM AUTOMOTIVE CABLE BLACK / YELLOW Description: 3MM AUTOMOTIVE CABLE BLUE Part No: 2542 Part No: 2536 Part No: 1165 Description: 3MM AUTOMOTIVE CABLE BLUE / RED Description: 3MM AUTOMOTIVE CABLE BLUE / WHITE Description: 3MM AUTOMOTIVE CABLE BROWN Part No: 0877 Part No: 1163 Part No: 6746 Description: 3MM AUTOMOTIVE CABLE BROWN / BLACK Description: 3MM AUTOMOTIVE CABLE BROWN / WHITE Description: 3MM AUTOMOTIVE CABLE BROWN / YELLOW Part No: 1166 Part No: 6747 Part No: 2534 Description: 3MM AUTOMOTIVE CABLE GREEN Description: 3MM AUTOMOTIVE CABLE GREEN / BLACK Description: 3MM AUTOMOTIVE CABLE GREEN / RED Part No: 6748 Part No: 0762 Part No: 1167 Description: 3MM AUTOMOTIVE CABLE GREEN / VIOLET Description: 3MM AUTOMOTIVE CABLE GREEN / WHITE Description: 3MM AUTOMOTIVE CABLE GREY Part No: 9431 Part No: 0925 Part No: 2531 Description: 3MM AUTOMOTIVE CABLE GREY / BLACK Description: 3MM AUTOMOTIVE CABLE ORANGE / BLACK Description: 3MM AUTOMOTIVE CABLE ORANGE / BLUE Part No: 6750 Part No: 2528 Part No: 1168 Description: 3MM AUTOMOTIVE CABLE PINK Description: 3MM AUTOMOTIVE CABLE PINK / BLACK Description: 3MM AUTOMOTIVE CABLE PURPLE Part No: 0962 Part No: 6751 Part No: 0635 Description: 3MM AUTOMOTIVE CABLE PURPLE / BLACK Description: 3MM AUTOMOTIVE CABLE RED Description: 3MM AUTOMOTIVE CABLE RED / BLACK APT 126 Part No: 2524 Part No: 2523 Part No: 1169 Description: 3MM AUTOMOTIVE CABLE RED / BLUE Description: 3MM AUTOMOTIVE CABLE RED / WHITE Description: 3MM AUTOMOTIVE CABLE WHITE Part No: 2522 Part No: 2521 Part No: 2520 Description: 3MM AUTOMOTIVE CABLE WHITE / BLACK Description: 3MM AUTOMOTIVE CABLE WHITE / BLUE Description: 3MM AUTOMOTIVE CABLE WHITE / RED Part No: 1170 Part No: 2519 Part No: 3461 Description: 3MM AUTOMOTIVE CABLE YELLOW Description: 3MM AUTOMOTIVE CABLE YELLOW / BLACK Description: 3MM AUTOMOTIVE CABLE YELLOW / BLUE Part No: 2518 Description: 3MM AUTOMOTIVE CABLE YELLOW / WHITE Cable - Automotive and Specialty 4mm Automotive Cable The AusProTec™ range of cables has been included to complement our constantly expanding consumables list. Part No: 1171 Part No: 1172 Part No: 6756 Description: 4MM AUTOMOTIVE CABLE BLACK Description: 4MM AUTOMOTIVE CABLE BLACK / GREEN Description: 4MM AUTOMOTIVE CABLE BLACK / RED Part No: 1173 Part No: 1174 Part No: 1175 Description: 4MM AUTOMOTIVE CABLE BLACK / WHITE Description: 4MM AUTOMOTIVE CABLE BLACK / YELLOW Description: 4MM AUTOMOTIVE CABLE BLUE Part No: 6757 Part No: 1660 Part No: 1177 Description: 4MM AUTOMOTIVE CABLE BLUE / RED Description: 4MM AUTOMOTIVE CABLE BLUE / WHITE Description: 4MM AUTOMOTIVE CABLE BROWN Part No: 6759 Part No: 1176 Description: 4MM AUTOMOTIVE CABLE BROWN / GREY Description: 4MM AUTOMOTIVE CABLE BROWN / WHITE Specialised Electrical Equipment 4mm Automotive: General purpose cable for automotive applications, for low voltage, high amperage wiring. • Conductor: Plain annealed copper wire • Insulator / Sheath: PVC V75 • Voltage 100VDC (not suitable for connections to mains power) • Stranding: 26 x 0.30mm • Roll Size: 100m Part No: 1178 Description: 4MM AUTOMOTIVE CABLE GREEN 127 APT Part No: 6716 Part No: 1655 Part No: 1385 Description: 4MM AUTOMOTIVE CABLE GREEN / BLACK Description: 4MM AUTOMOTIVE CABLE GREEN / RED Description: 4MM AUTOMOTIVE CABLE GREEN / VIOLET Part No: 1180 Part No: 1179 Part No: 1181 Description: 4MM AUTOMOTIVE CABLE GREEN WHITE Description: 4MM AUTOMOTIVE CABLE GREY Description: 4MM AUTOMOTIVE CABLE ORANGE Part No: 6719 Part No: 3737 Part No: 1182 Description: 4MM AUTOMOTIVE CABLE ORANGE / BLUE Description: 4MM AUTOMOTIVE CABLE PINK Description: 4MM AUTOMOTIVE CABLE PURPLE Part No: 1183 Part No: 1184 Part No: 1185 Description: 4MM AUTOMOTIVE CABLE RED Description: 4MM AUTOMOTIVE CABLE RED / BLACK Description: 4MM AUTOMOTIVE CABLE RED / BLUE Part No: 1186 Part No: 6722 Part No: 1189 Description: 4MM AUTOMOTIVE CABLE RED / WHITE Description: 4MM AUTOMOTIVE CABLE VIOLET / BLACK Description: 4MM AUTOMOTIVE CABLE WHITE Part No: 6723 Part No: 1187 Part No: 1188 Description: 4MM AUTOMOTIVE CABLE WHITE / BLACK Description: 4MM AUTOMOTIVE CABLE WHITE / BLUE Description: 4MM AUTOMOTIVE CABLE WHITE / RED Part No: 1191 Part No: 6713 Part No: 1190 Description: 4MM AUTOMOTIVE CABLE YELLOW Description: 4MM AUTOMOTIVE CABLE YELLOW / BLACK Description: 4MM AUTOMOTIVE CABLE YELLOW / BLUE Part No: 1659 Part No: 6741 Description: 4MM AUTOMOTIVE CABLE YELLOW WHITE Description: 4MM AUTOMOTIVE CABLE DOUBLE INSULATED BLACK - 30M ROLL Specialised Electrical Equipment APT 128 Cable - Automotive and Specialty 5mm Automotive Cable The AusProTec™ range of cables has been included to complement our constantly expanding consumables list. 5mm Automotive: General purpose cable for automotive applications, for low voltage, high amperage wiring. • Conductor: Plain annealed copper wire • Insulator / Sheath: PVC V75 • Voltage 100VDC (not suitable for connections to mains power) • Stranding: 36 x 0.32mm • Roll Size: 30m Part No: 1192 Part No: 1193 Part No: 1196 Description: 5MM AUTOMOTIVE CABLE BLACK Description: 5MM AUTOMOTIVE CABLE BLUE Description: 5MM AUTOMOTIVE CABLE GREEN Part No: 1201 Part No: 1200 Part No: 1202 Description: 5MM AUTOMOTIVE CABLE RED Description: 5MM AUTOMOTIVE CABLE VIOLET Description: 5MM AUTOMOTIVE CABLE WHITE Part No: 1203 Description: 5MM AUTOMOTIVE CABLE YELLOW Cable - Automotive and Specialty 6mm Automotive Cable 6mm Automotive: General purpose cable for automotive applications, for low voltage, high amperage wiring. • Conductor: Plain annealed copper wire • Insulator / Sheath: PVC V75 • Voltage 100VDC (not suitable for connections to mains power) • Stranding: 57 x 0.32mm • Roll Size: 30m Part No: 1204 Part No: 1206 Part No: 1207 Description: 6MM AUTOMOTIVE CABLE BLACK Description: 6MM AUTOMOTIVE CABLE BROWN Description: 6MM AUTOMOTIVE CABLE GREEN 129 APT Specialised Electrical Equipment The AusProTec™ range of cables has been included to complement our constantly expanding consumables list. Part No: 1214 Part No: 1211 Part No: 1210 Description: 6MM AUTOMOTIVE CABLE ORANGE Description: 6MM AUTOMOTIVE CABLE RED Description: 6MM AUTOMOTIVE CABLE VIOLET Part No: 1212 Part No: 1213 Description: 6MM AUTOMOTIVE CABLE WHITE Description: 6MM AUTOMOTIVE CABLE YELLOW Cable - Automotive and Specialty Coaxial Cable The AusProTec™ range of cables has been included to complement our constantly expanding consumables list. For further technical information, please contact your nearest RCT branch. Part No: 6528 Part No: 8905 Part No: 1127 Description: COAXIAL CABLE KEVLAR 1 CORE COAX 11 CORE 18/AWG COLORED CABLE Description: COAXIAL CABLE NON RADIATING 1/2" - 500M ROLLS ONLY Description: COAXIAL CABLE NON RADIATING RG8 - 10MM - 300M ROLLS ONLY Part No: 0261 Part No: 0684 Part No: 7293 Description: COAXIAL CABLE RG174A/U Description: COAXIAL CABLE RG316 Description: COAXIAL CABLE RG58 LSF TYPE Part No: 11542 Description: COAXIAL STRIPPING TOOL TO SUIT 1127 Specialised Electrical Equipment APT 130 Cable - Automotive and Specialty Data Cable The AusProTec™ range of cables has been included to complement our constantly expanding consumables list. For further technical information, please contact your nearest RCT branch. Part No: 1555 Part No: 2832 Part No: 10745 Description: DATA CABLE 2 CORE TWISTED SHIELDED Description: DATA CABLE 3 CORE 0.2MM SHIELDED Description: DATA CABLE 12 CORE 0.22MM SHIELDED Part No: 7263 Part No: 4817 Part No: 4938 Description: DATA CABLE 3 CORE 0.75MM SHIELDED Description: DATA CABLE 3 CORE 0.75MM SHIELDED BLACK Description: DATA CABLE 4 CORE 0.2MM SHIELDED Part No: 7402 Part No: 6215 Part No: 7347 Description: DATA CABLE 6 TWISTED PAIRS 0.75MM Description: DATA CABLE 8 CORE 0.2MM SHIELDED Description: ROBOTICS CABLE 4 CORE 0.34MM SHIELDED Cable - Automotive and Specialty Flexivolt Cable The AusProTec™ range of cables has been included to complement our constantly expanding consumables list. Part No: 4376 Part No: 4380 Part No: 4379 Description: FLEXIVOLT CABLE 0.25MM BLACK Description: FLEXIVOLT CABLE 0.25MM BLUE Description: FLEXIVOLT CABLE 0.25MM GREEN Part No: 4377 Part No: 4378 Part No: 10613 Description: FLEXIVOLT CABLE 0.25MM RED Description: FLEXIVOLT CABLE 0.25MM YELLOW Description: FLEXIVOLT CABLE 0.10MM RED Part No: 10614 Part No: 10615 Part No: 10616 Description: FLEXIVOLT CABLE 0.10MM BLUE Description: FLEXIVOLT CABLE 0.10MM YELLOW Description: FLEXIVOLT CABLE 0.10MM GREEN Specialised Electrical Equipment FLEXIVOLT: Hook up wire • Conductor: Copper wire • Insulator / Sheath: PVC 3.9mm OD • Voltage: 1.5kV • Stranding: 258 x 0.07mm • Roll Size: 100m Part No: 10612 Description: FLEXIVOLT CABLE 0.10MM BLACK 131 APT Cable - Automotive and Specialty FVT Tinned Copper Cable The AusProTec™ range of cables has been included to complement our constantly expanding consumables list. FVT: Wiring of communications, electronic equipment and switchboards • Conductor: Tinned copper wire • Insulator / Sheath: V90HT (105°C) PVC • Voltage: 250V 7.5A (not suitable for connections to mains power) • Stranding: 24 x 0.20mm • Roll Size: 100m Part No: 1383 Part No: 1380 Part No: 1376 Description: FVT TINNED COPPER CABLE BLACK Description: FVT TINNED COPPER CABLE BLUE Description: FVT TINNED COPPER CABLE BROWN Part No: 0303 Part No: 1375 Part No: 1382 Description: FVT TINNED COPPER CABLE GREEN Description: FVT TINNED COPPER CABLE GREEN / YELLOW Description: FVT TINNED COPPER CABLE GREY Part No: 1377 Part No: 1522 Part No: 1379 Description: FVT TINNED COPPER CABLE ORANGE Description: FVT TINNED COPPER CABLE PINK Description: FVT TINNED COPPER CABLE RED Part No: 1378 Part No: 1381 Part No: 9641 Description: FVT TINNED COPPER CABLE VIOLET Description: FVT TINNED COPPER CABLE WHITE Description: FVT TINNED COPPER CABLE YELLOW Cable - Automotive and Specialty HVT Tinned Copper Cable Specialised Electrical Equipment The AusProTec™ range of cables has been included to complement our constantly expanding consumables list. HVT: Wiring of internal low voltage interconnections • Conductor: Tinned copper wire • Insulator / Sheath: 105°C PVC to UL1581 • Voltage: 250V 3A (not suitable for connections to mains power) • Stranding: 10 x 0.25mm • Roll Size: 100m APT 132 Part No: 2693 Part No: 2691 Part No: 4876 Description: HVT TINNED COPPER CABLE BLACK Description: HVT TINNED COPPER CABLE BLUE Description: HVT TINNED COPPER CABLE BROWN Part No: 4878 Part No: 4879 Part No: 4880 Description: HVT TINNED COPPER CABLE GREEN Description: HVT TINNED COPPER CABLE GREY Description: HVT TINNED COPPER CABLE ORANGE Part No: 5919 Part No: 2692 Part No: 5926 Description: HVT TINNED COPPER CABLE PINK Description: HVT TINNED COPPER CABLE RED Description: HVT TINNED COPPER CABLE VIOLET Part No: 4881 Part No: 4882 Part No: 10408 Description: HVT TINNED COPPER CABLE WHITE Description: HVT TINNED COPPER CABLE YELLOW Description: HVT TINNED COPPER CABLE GREEN / YELLOW Cable - Automotive and Specialty Olflex Cable (Formally Kroflex) The AusProTec™ range of cables has been included to complement our constantly expanding consumables list. Kroflex 110 Series: All electrical systems in dry or damp interiors especially in industrial applications. • Temp Range: -40 - +70°C • Nominal Voltage: 300v • Core identification code: Black cores with white numbers • Available per metre Part No: 5749 Part No: 8842 Part No: 7001 Description: OLFLEX CABLE 12 CORE 0.5MM 110 SERIES Description: OLFLEX CABLE 12 CORE 1.0MM 110 SERIES Description: OLFLEX CABLE 12 CORE 1.0MM 400 SERIES Part No: 5021 Part No: 5095 Part No: 0998 Description: OLFLEX CABLE 12 CORE 1.0MM SHIELDED CLEAR COVER 110 SERIES Description: OLFLEX CABLE 12 CORE 1.5MM 110 SERIES Description: OLFLEX CABLE 18 CORE 1.0MM 110 SERIES 133 Specialised Electrical Equipment Kroflex 400 Series: Control cable and power supply cable for machine tools, mechanical and instrument engineering. • Temp Range: -40 - +80°C • Nominal Voltage: 300v • Core identification code: Black cores with white numbers • Available per metre APT Part No: 5023 Part No: 0873 Part No: 3831 Description: OLFLEX CABLE 18 CORE 1.0MM SHIELDED CLEAR COVER 110 SERIES Description: OLFLEX CABLE 18 CORE 1.5MM 110 SERIES Description: OLFLEX CABLE 18 CORE 1.5MM SHIELDED CLEAR COVER 110 SERIES Part No: 4211 Part No: 10785 Part No: 1586 Description: OLFLEX CABLE 2 CORE 0.75MM 110 SERIES Description: OLFLEX CABLE 25 CORE 0.5MM 110 SERIES Description: OLFLEX CABLE 25 CORE 1.0MM 110 SERIES Part No: 7006 Part No: 3626 Part No: 0997 Description: OLFLEX CABLE 25 CORE 1.0MM 400 SERIES Description: OLFLEX CABLE 25 CORE 1.5MM 110 SERIES Description: OLFLEX CABLE 27 CORE 1.0MM 110 SERIES Part No: 5727 Part No: 0214 Part No: 2550 Description: OLFLEX CABLE 3 CORE 0.75MM 400 SERIES Description: OLFLEX CABLE 3 CORE 1.5MM 400 SERIES Description: OLFLEX CABLE 34 CORE 1.0MM 400 SERIES Part No: 0215 Part No: 8843 Part No: 7551 Description: OLFLEX CABLE 36 CORE 1.0MM 110 SERIES Description: OLFLEX CABLE 41 CORE 1.0MM 110 SERIES Description: OLFLEX CABLE 49 CORE 0.75MM 110 SERIES Part No: 7963 Part No: 0320 Part No: 3645 Description: OLFLEX CABLE 5 CORE 0.5MM 110 SERIES Description: OLFLEX CABLE 5 CORE 1.0MM 110 SERIES Description: OLFLEX CABLE 50 CORE 1.5MM 110 SERIES Part No: 6387 Part No: 1478 Part No: 0321 Description: OLFLEX CABLE 65 CORE 1.0MM 110 SERIES Description: OLFLEX CABLE 7 CORE 0.5MM SHIELDED CLEAR COVER 110 SERIES Description: OLFLEX CABLE 7 CORE 1.0MM 110 SERIES Part No: 2706 Part No: 8841 Part No: 4855 Description: OLFLEX CABLE 7 CORE 1.5MM 400 SERIES Description: OLFLEX CABLE 9 CORE 1.0MM 110 SERIES Description: OLFLEX CABLE 9 CORE 1.5MM 110 SERIES Specialised Electrical Equipment APT 134 Cable - Automotive and Specialty Power Cable The AusProTec™ range of cables has been included to complement our constantly expanding consumables list. For further technical information, please contact your nearest RCT branch. Part No: 3732 Part No: 1135 Part No: 4536 Description: POWER CABLE 2 CORE 1.0MM BLACK Description: POWER CABLE 2 CORE 1.5MM GREY Description: POWER CABLE 2 CORE 2.5MM GREY - FLEXIBLE Part No: 1552 Part No: 2344 Part No: 7981 Description: POWER CABLE 3 CORE 1.0MM GREY - FLEXIBLE Description: POWER CABLE 3 CORE 1.5MM GREY Description: POWER CABLE 3 CORE 2.5MM ORANGE - 1KV Part No: 5286 Part No: 4970 Description: POWER CABLE 4 CORE 1.0MM SHIELDED - NUMBERED CORES Description: SILICONE FLEX CABLE 2 CORE 1.0MM Cable - Automotive and Specialty Starter Cable The AusProTec™ range of cables has been included to complement our constantly expanding consumables list. Part No: 0775 Part No: 6627 Part No: 0774 Description: STARTER CABLE 00 B&S BLACK Description: STARTER CABLE 00 B&S RED Description: STARTER CABLE 0 B&S BLACK Part No: 6077 Part No: 0773 Part No: 6752 Description: STARTER CABLE 0 B&S RED Description: STARTER CABLE 1 B&S BLACK Description: STARTER CABLE 1 B&S RED Part No: 6698 Part No: 6753 Part No: 7724 Description: STARTER CABLE 2 B&S BLACK Description: STARTER CABLE 3 B&S BLACK Description: STARTER CABLE 3 B&S RED Part No: 6742 Part No: 7889 Description: STARTER CABLE 6 B&S BLACK Description: STARTER CABLE 6 B&S RED 135 Specialised Electrical Equipment For further technical information, please contact your nearest RCT branch. APT Cable - Automotive and Specialty Trailer Cable The AusProTec™ range of cables has been included to complement our constantly expanding consumables list. For further technical information, please contact your nearest RCT branch. Part No: 0769 Part No: 0770 Part No: 6743 Description: TRAILER CABLE 2 CORE 3MM BLACK Description: TRAILER CABLE 2 CORE 4MM BLACK Description: TRAILER CABLE 2 CORE 5MM BLACK Part No: 9286 Part No: 6740 Part No: 0771 Description: TRAILER CABLE 5 CORE 2MM BLACK Description: TRAILER CABLE 5 CORE 3MM BLACK Description: TRAILER CABLE 5 CORE 4MM BLACK Part No: 7987 Part No: 0772 Part No: 6707 Description: TRAILER CABLE 5 CORE 6MM BLACK Description: TRAILER CABLE 7 CORE 3MM BLACK Description: TRAILER CABLE 7 CORE 4MM BLACK Cable Accessories and Mounting Battery Terminals, Clips, Clamps and Accessories RCT stocks a wide range of battery terminals, clips, clamps and accessories to suit all types of wiring applications. For further technical information, please contact your nearest RCT branch. Specialised Electrical Equipment Part No: 6631 Part No: 0791 Part No: 9057 Description: ALLIGATOR CLIP ZINC PLATED 5 AMP SET OF 5 RED / 5 BLACK Description: ALLIGATOR CLIP STEEL 25 AMP Description: ALLIGATOR CLIP STEEL 50 AMP APT 136 Part No: 2867 Part No: 2854 Description: BATTERY TERMINAL COVER BLACK RIGHT HAND ENTRY Description: BATTERY TERMINAL COVER BLACK STRAIGHT ENTRY Description: BATTERY TERMINAL COVER RED LEFT HAND ENTRY Part No: 2866 Part No: 8219 Part No: 8220 Description: BATTERY TERMINAL COVER RED STRAIGHT ENTRY Description: BATTERY TERMINAL NEGATIVE - HEAVY DUTY Description: BATTERY TERMINAL POSITIVE - HEAVY DUTY Part No: 0109 Part No: 0108 Part No: 6630 Description: BOOSTER CLAMP 400 AMP BLACK Description: BOOSTER CLAMP 400 AMP RED Description: BOOSTER CLAMP COPPER 50 AMP BLACK Part No: 6629 Part No: 2858 Part No: 2865 Description: BOOSTER CLAMP COPPER 50 AMP RED Description: COPPER LUG COVER 0.8 – 5MM BLACK Description: COPPER LUG COVER 32 – 36MM BLACK Part No: 2862 Part No: 1394 Part No: 1395 Description: COPPER LUG COVER 8 – 32MM BLACK Description: COVER BLACK TO SUIT 0791 Description: COVER RED TO SUIT 0791 137 Specialised Electrical Equipment Part No: 2856 APT Cable Accessories and Mounting Cable Markers RCT stock a large range of cable markers for industrial and mining applications. Please feel free to contact us for an application to suit your requirements. Specialised Electrical Equipment Part No: 6191 Part No: 9500 Part No: 9501 Description: CLIP ON CABLE MARKER (-) Description: CLIP ON CABLE MARKER (0) Description: CLIP ON CABLE MARKER (1) Part No: 9502 Part No: 9503 Part No: 9504 Description: CLIP ON CABLE MARKER (2) Description: CLIP ON CABLE MARKER (3) Description: CLIP ON CABLE MARKER (4) Part No: 9477 Part No: 9478 Part No: 9479 Description: CLIP ON CABLE MARKER (5) Description: CLIP ON CABLE MARKER (6) Description: CLIP ON CABLE MARKER (7) Part No: 9480 Part No: 9481 Part No: 9482 Description: CLIP ON CABLE MARKER (8) Description: CLIP ON CABLE MARKER (9) Description: CLIP ON CABLE MARKER (V) Part No: 9483 Part No: 9469 Part No: 5806 Description: CLIP ON CABLE MARKER (W) Description: CLIP ON CABLE MARKER (X) Description: HEATSHRINK CABLE MARKER (0) ZERO Part No: 0680 Part No: 0685 Part No: 0690 Description: HEATSHRINK CABLE MARKER (1) Description: HEATSHRINK CABLE MARKER (2) Description: HEATSHRINK CABLE MARKER (3) Part No: 0686 Part No: 0662 Part No: 0696 Description: HEATSHRINK CABLE MARKER (4) Description: HEATSHRINK CABLE MARKER (5) Description: HEATSHRINK CABLE MARKER (6) Part No: 0697 Part No: 0699 Part No: 0688 Description: HEATSHRINK CABLE MARKER (7) Description: HEATSHRINK CABLE MARKER (8) Description: HEATSHRINK CABLE MARKER (9) Part No: 0648 Part No: 0656 Part No: 0653 Description: HEATSHRINK CABLE MARKER (A) Description: HEATSHRINK CABLE MARKER (B) Description: HEATSHRINK CABLE MARKER ( C) Part No: 0645 Part No: 0644 Part No: 0592 Description: HEATSHRINK CABLE MARKER (D) Description: HEATSHRINK CABLE MARKER (E) Description: HEATSHRINK CABLE MARKER (F) APT 138 Part No: 0618 Part No: 0570 Description: HEATSHRINK CABLE MARKER (G) Description: HEATSHRINK CABLE MARKER (H) Description: HEATSHRINK CABLE MARKER (I) Part No: 0563 Part No: 0619 Part No: 5852 Description: HEATSHRINK CABLE MARKER (J) Description: HEATSHRINK CABLE MARKER (K) Description: HEATSHRINK CABLE MARKER (L) Part No: 0624 Part No: 0625 Part No: 0738 Description: HEATSHRINK CABLE MARKER (M) Description: HEATSHRINK CABLE MARKER (N) Description: HEATSHRINK CABLE MARKER (O) Part No: 2894 Part No: 7306 Part No: 2881 Description: HEATSHRINK CABLE MARKER (P) Description: HEATSHRINK CABLE MARKER ( R) Description: HEATSHRINK CABLE MARKER (S) Part No: 7307 Part No: 2893 Part No: 7308 Description: HEATSHRINK CABLE MARKER (T) Description: HEATSHRINK CABLE MARKER (U) Description: HEATSHRINK CABLE MARKER (X) Part No: 6643 Part No: 5807 Part No: 5808 Description: HEATSHRINK CABLE MARKER (Y) Description: SLIDE ON CABLE MARKER YELLOW (1) Description: SLIDE ON CABLE MARKER YELLOW (2) Part No: 5809 Part No: 5810 Part No: 5811 Description: SLIDE ON CABLE MARKER YELLOW (3) Description: SLIDE ON CABLE MARKER YELLOW (4) Description: SLIDE ON CABLE MARKER YELLOW (5) Part No: 5812 Part No: 5813 Part No: 5815 Description: SLIDE ON CABLE MARKER YELLOW (6) Description: SLIDE ON CABLE MARKER YELLOW (7) Description: SLIDE ON CABLE MARKER YELLOW (8) Part No: 5957 Part No: 5958 Part No: 5959 Description: SLIDE ON CABLE MARKER YELLOW (9) Description: SLIDE ON CABLE MARKER YELLOW (A) Description: SLIDE ON CABLE MARKER YELLOW (B) Part No: 5960 Part No: 5961 Part No: 5962 Description: SLIDE ON CABLE MARKER YELLOW ( C) Description: SLIDE ON CABLE MARKER YELLOW (D) Description: SLIDE ON CABLE MARKER YELLOW (E) Part No: 5963 Part No: 5965 Part No: 5964 Description: SLIDE ON CABLE MARKER YELLOW (F) Description: SLIDE ON CABLE MARKER YELLOW (G) Description: SLIDE ON CABLE MARKER YELLOW (H) Part No: 5816 Part No: 5818 Part No: 5819 Description: SLIDE ON CABLE MARKER YELLOW (I) Description: SLIDE ON CABLE MARKER YELLOW (J) Description: SLIDE ON CABLE MARKER YELLOW (K) Specialised Electrical Equipment Part No: 0594 139 APT Specialised Electrical Equipment Part No: 5820 Part No: 5821 Part No: 5822 Description: SLIDE ON CABLE MARKER YELLOW (L) Description: SLIDE ON CABLE MARKER YELLOW (M) Description: SLIDE ON CABLE MARKER YELLOW (N) Part No: 5824 Part No: 5825 Part No: 5826 Description: SLIDE ON CABLE MARKER YELLOW (P) Description: SLIDE ON CABLE MARKER YELLOW (Q) Description: SLIDE ON CABLE MARKER YELLOW ( R) Part No: 5827 Part No: 5828 Part No: 5831 Description: SLIDE ON CABLE MARKER YELLOW (S) Description: SLIDE ON CABLE MARKER YELLOW (T) Description: SLIDE ON CABLE MARKER YELLOW (U) Part No: 5832 Part No: 5833 Part No: 5835 Description: SLIDE ON CABLE MARKER YELLOW (V) Description: SLIDE ON CABLE MARKER YELLOW (W) Description: SLIDE ON CABLE MARKER YELLOW (X) Part No: 5836 Part No: 5837 Part No: 10301 Description: SLIDE ON CABLE MARKER YELLOW (Y) Description: SLIDE ON CABLE MARKER YELLOW (Z) Description: CABLE MARKER KIT (COLOUR CODED) Part No: 10302 Part No: 10303 Part No: 10304 Description: CABLE MARKER COLOUR CODED 0 BLACK Description: CABLE MARKER COLOUR CODED 1 BROWN Description: CABLE MARKER COLOUR CODED 2 RED Part No: 10305 Part No: 10306 Part No: 10307 Description: CABLE MARKER COLOUR CODED 3 ORANGE Description: CABLE MARKER COLOUR CODED 4 YELLOW Description: CABLE MARKER COLOUR CODED 5 GREEN Part No: 10308 Part No: 10309 Part No: 10310 Description: CABLE MARKER COLOUR CODED 6 BLUE Description: CABLE MARKER COLOUR CODED 7 PURPLE Description: CABLE MARKER COLOUR CODED 8 GREY Part No: 10311 Part No: 10312 Part No: 10313 Description: CABLE MARKER COLOUR CODED 9 WHITE Description: CABLE MARKER COLOUR CODED R Description: CABLE MARKER COLOUR CODED S Part No: 10314 Part No: 10315 Part No: 10316 Description: CABLE MARKER COLOUR CODED T Description: CABLE MARKER COLOUR CODED - Description: CABLE MARKER COLOUR CODED + Part No: 10317 Part No: 10318 Part No: 10319 Description: CABLE MARKER COLOUR CODED L Description: CABLE MARKER COLOUR CODED N Description: CABLE MARKER COLOUR CODED GND APT 140 Cable Accessories and Mounting Cable Ties and Mounts RCT stocks a wide range of wiring harness accessories to suit all types of applications. UV approved nylon, self-adhesive cable tie mounts are designed to support lightweight wire bundles. Cable ties made from nylon 6/6 weather resistant UV protection nylon. Part No: 0789 Part No: 6692 Part No: 2142 Description: CABLE TIE 100 x 2.5MM Description: CABLE TIE 150 x 3.5MM Description: CABLE TIE 200 x 2.5MM Part No: 6691 Part No: 6675 Part No: 0211 Description: CABLE TIE 200 x 3.5MM Description: CABLE TIE 200 x 4.6MM Description: CABLE TIE 270 x 4.8MM Part No: 0788 Part No: 6690 Part No: 6694 Description: CABLE TIE 270 x 8.6MM Description: CABLE TIE 300 x 3.5MM Description: CABLE TIE 390 x 4.6MM Part No: 6700 Part No: 9909 Part No: 0838 Description: CABLE TIE 390 x 7.6MM Description: CABLE TIE 540 x 13.1MM Description: CABLE TIE MOUNT 21 x 21MM Part No: 0837 Specialised Electrical Equipment Description: CABLE TIE MOUNT 27 x 27MM 141 APT Cable Accessories and Mounting Glands (Nylon and Metal) RCT stock a wide range of nylon glands, metal glands and locknuts to suit heavy and light duty wiring applications. Available in multiple sizes and gland styles. Please refer to your local RCT parts department for further information. Specialised Electrical Equipment Part No: 8180 Part No: 1085 Part No: 1447 Description: METAL GLAND 16MM 0 - 6.1mm HEX HEAD Description: METAL GLAND 16MM 8mm HEX HEAD Description: METAL GLAND 20MM 11 - 14.5mm DOME TOP Part No: 1286 Part No: 1276 Part No: 2697 Description: METAL GLAND 20MM 11.3 - 13mm HEX HEAD Description: METAL GLAND 20MM 6.7 - 8.3mm HEX HEAD Description: METAL GLAND 20MM 7 - 11mm DOME TOP Part No: 1002 Part No: 2698 Part No: 0790 Description: METAL GLAND 20MM 8.3 - 9.9mm HEX HEAD Description: METAL GLAND 25MM 14.5 - 20.5mm DOME TOP Description: METAL GLAND 25MM 14.7 - 15.9mm HEX HEAD Part No: 8181 Part No: 8182 Part No: 1084 Description: METAL GLAND 25MM 17.5 - 19mm HEX HEAD Description: METAL GLAND 25MM 19 - 20.6mm HEX HEAD Description: METAL GLAND 32MM 20.6 - 22.2mm HEX HEAD APT 142 Part No: 7049 Part No: 5209 Description: METAL GLAND 32MM 23.8 - 25.8mm HEX HEAD Description: METAL GLAND 32MM 26.5 - 34.5mm HEX HEAD Description: METAL GLAND 40MM 32 - 35mm HEX HEAD Part No: 1259 Part No: 0832 Part No: 5872 Description: METAL GLAND LOCKNUT 20MM Description: METAL GLAND LOCKNUT 25MM Description: METAL GLAND LOCKNUT 32MM Part No: 7304 Part No: 7305 Part No: 7303 Description: METAL GLAND PG11 5 - 10mm DOME TOP Description: METAL GLAND PG13 5.6 - 12mm DOME TOP Description: METAL GLAND PG7 2 - 6.5mm DOME TOP Part No: 0813 Part No: 0906 Part No: 9954 Description: METAL GLAND PG9 4 - 8mm HEX HEAD Description: NYLON GLAND 16MM 6.5 - 10mm Description: NYLON GLAND 20MM 4.4 - 13.4mm Part No: 9955 Part No: 9690 Part No: 1538 Description: NYLON GLAND 25MM 11.0 - 17.0mm Description: NYLON GLAND 32MM 15 - 32mm Description: NYLON GLAND LOCKNUT 16MM Specialised Electrical Equipment Part No: 1086 143 APT Part No: 0502 Part No: 0504 Part No: 7292 Description: NYLON GLAND PG11 5 - 10mm Description: NYLON GLAND PG13.5 6 - 12mm Description: NYLON GLAND PG16 10 - 14mm Part No: 0170 Part No: 2734 Description: NYLON GLAND PG7 3 - 6.5 mm Description: NYLON GLAND PG9 4 - 8 mm Cable Accessories and Mounting P Clamps RCT stocks a wide range of wiring harness accessories to suit all types of applications. Made from PVC coated steel, the AusProTec™ range of P Clamps are available in sizes from 1/4" to 1.25" (closed size ID). Part No: 9604 Part No: 9662 Part No: 4492 Description: P-CLAMP 1/4" ID Description: P-CLAMP 3/8" ID Description: P-CLAMP 1/2" ID Part No: 5293` Part No: 5577 Part No: 7946 Description: P-CLAMP 3/4" ID Description: P-CLAMP 1" ID Description: P-CLAMP 1.062" ID Specialised Electrical Equipment Part No: 8533 Description: P-CLAMP 1.25" ID APT 144 Cable Sleeving and Conduit Fibreglass Silicone Sleeving RCT stocks a wide range of wiring harness accessories to suit all types of applications. Silicone elastomer coated braided glass insulating sleeving (SRGS). • Temperature range: -60ºC to 250ºC. (180ºC continuous) • Available per metre. Part No: 2512 Part No: 2513 Description: FIBREGLASS SILICONE SLEEVING 2MM BLACK Description: FIBREGLASS SILICONE SLEEVING 4MM BLACK Description: FIBREGLASS SILICONE SLEEVING 6MM BLACK Part No: 2515 Part No: 2526 Part No: 2529 Description: FIBREGLASS SILICONE SLEEVING 8MM BLACK Description: FIBREGLASS SILICONE SLEEVING 10MM BLACK Description: FIBREGLASS SILICONE SLEEVING 12MM BLACK Part No: 2533 Part No: 2535 Part No: 2543 Description: FIBREGLASS SILICONE SLEEVING 15MM BLACK Description: FIBREGLASS SILICONE SLEEVING 20MM BLACK Description: FIBREGLASS SILICONE SLEEVING 25MM BLACK Specialised Electrical Equipment Part No: 2510 145 APT Cable Sleeving and Conduit Flexible Conduit (Thick Walled) RCT stocks a wide range of wiring harness accessories to suit all types of applications. Thick walled flexible PVC black conduit. • Available in 6mm to 32mm with pull wire fitment for sizes 16mm and above. • Roll Size: 30 metres Part No: 7309 Part No: 7151 Part No: 4167 Description: FLEXIBLE CONDUIT THICK WALLED 6MM BLACK Description: FLEXIBLE CONDUIT THICK WALLED 8MM BLACK Description: FLEXIBLE CONDUIT THICK WALLED 10MM BLACK Part No: 4078 Part No: 2839 Part No: 3019 Description: FLEXIBLE CONDUIT THICK WALLED 13MM BLACK Description: FLEXIBLE CONDUIT THICK WALLED 16MM BLACK Description: FLEXIBLE CONDUIT THICK WALLED 20MM BLACK Part No: 2950 Part No: 5862 Description: FLEXIBLE CONDUIT THICK WALLED 25MM BLACK Description: FLEXIBLE CONDUIT THICK WALLED 32MM BLACK Cable Sleeving and Conduit Heatshrink The AusProTec™ heat shrink tubing range has been introduced as an alternative to standard approaches to insulation, such as taping or moulding in place. The tubing comes in a wide range of sizes, colours, and materials. When heated, it shrinks to conform to the size and shape of the underlying material—making installation fast and easy. Available in handy 1.2 metre lengths thin wall tubing provides superior insulation, strain relief, and protection against mechanical damage and abrasion. When corrosion protection and sealing is required, use dual wall tubing. During installation, an adhesive lining melts and flows, creating a moisture-resistant protective barrier. Specialised Electrical Equipment Part No: 9349 Part No: 8002 Part No: 2818 Description: HEATSHRINK RESIN LINED STANDARD WALL 9 - 3MM BLACK Description: HEATSHRINK RESIN LINED CLEAR 16 - 4MM Description: HEATSHRINK RESIN LINED MEDIUM WALL 14 - 5.5MM BLACK Part No: 2835 Part No: 2833 Part No: 2791 Description: HEATSHRINK RESIN LINED MEDIUM WALL 22.5 - 9MM BLACK Description: HEATSHRINK RESIN LINED MEDIUM WALL 31.5 - 13MM BLACK Description: HEAT SHRINK RESIN LINED STANDARD WALL 6 - 2MM BLACK APT 146 Part No: 2838 Part No: 9372 Part No: 9374 Description: HEATSHRINK RESIN LINED MEDIUM WALL 9 - 3.5MM BLACK Description: HEATSHRINK NON RESIN LINED 12.7MM BLACK Description: HEATSHRINK NON RESIN LINED 19MM BLACK Part No: 9375 Part No: 9377 Part No: 9378 Description: HEATSHRINK NON RESIN LINED 2.4MM BLACK Description: HEATSHRINK NON RESIN LINED 25.4MM BLACK Description: HEATSHRINK NON RESIN LINED 3.2MM BLACK Part No: 9379 Part No: 9380 Part No: 9382 Description: HEATSHRINK NON RESIN LINED 4.8MM BLACK Description: HEATSHRINK NON RESIN LINED 6.4MM BLACK Description: HEATSHRINK NON RESIN LINED 9.5MM BLACK Part No: 0374 Part No: 9348 Description: HEATSHRINK RESIN LINED STANDARD WALL 12 - 4MM BLACK Description: HEATSHRINK RESIN LINED STANDARD WALL 6 - 2MM BLACK Part No: 9297 Part No: 9298 Part No: 9300 Description: HEATSHRINK NON RESIN LINED 19MM CLEAR Description: HEATSHRINK NON RESIN LINED 25MM CLEAR Description: HEATSHRINK NON RESIN LINED 38MM CLEAR Part No: 9351 Part No: 9350 Part No: 9352 Description: HEATSHRINK RESIN LINED CLEAR 12 - 3MM Description: HEATSHRINK RESIN LINED CLEAR 8 - 2MM Description: HEAT SHRINK RESIN LINED CLEAR 16 - 4MM Part No: 0948 Part No: 7511 Part No: 9853 Description: HEATSHRINK RESIN LINED MEDIUM WALL 27 - 8MM BLACK Description: HEATSHRINK RESIN LINED DUAL WALL 24 - 8MM RED Description: HEATSHRINK RESIN LINED DUAL WALL 13 - 4MM BLACK Part No: 5075 Part No: 7444 Part No: 9619 Description: HEATSHRINK RESIN LINED DUAL WALL 19 - 6MM BLACK Description: HEATSHRINK RESIN LINED DUAL WALL 25 - 8MM BLACK Description: HEATSHRINK RESIN LINED DUAL WALL 3 - 0.6MM BLACK Part No: 2243 Part No: 5842 Part No: 7515 Description: HEATSHRINK RESIN LINED DUAL WALL 43 - 10MM BLACK Description: HEATSHRINK RESIN LINED DUAL WALL 51 - 16MM BLACK Description: HEATSHRINK RESIN LINED DUAL WALL 6 - 2MM BLACK Part No: 3105 Part No: 8864 Part No: 7092 Description: HEATSHRINK RESIN LINED DUAL WALL 9 - 3MM BLACK Description: HEATSHRINK SHAPE LINED 2 FINGER Description: HEATSHRINK SHAPE LINED 3 FINGER Part No: 5201 Specialised Electrical Equipment Description: HEATSHRINK RESIN LINED STANDARD WALL 20 - 10MM BLUE 147 APT Cable Sleeving and Conduit Nylon Conduit RCT stocks a wide range of wiring harness accessories to suit all types of applications. Made from polyamide 6, flexible, high impact resistant, flame retardant and UV resistant. • Roll Size: 50 metres Part No: 1661 Part No: 1662 Part No: 1663 Description: NYLON CONDUIT 8MM (ID 6.6MM) Description: NYLON CONDUIT 10MM (ID 8.4MM) Description: NYLON CONDUIT 12MM (ID 9.9MM) Part No: 1664 Part No: 1665 Part No: 1666 Description: NYLON CONDUIT 16MM (ID 12.7MM) Description: NYLON CONDUIT 20MM (ID 16.6MM) Description: NYLON CONDUIT 25MM (ID 21.3MM) Part No: 1667 Description: NYLON CONDUIT 32MM (ID 27.9MM) Cable Sleeving and Conduit PVC Sleeving RCT stocks a wide range of wiring harness accessories to suit all types of applications. PVC sleeving is an effective product to protect cables and wires from abrasion. • Roll size: 25 metres Specialised Electrical Equipment Part No: 0854 Part No: 0781 Part No: 0840 Description: PVC SLEEVING 4MM BLACK Description: PVC SLEEVING 5MM BLACK Description: PVC SLEEVING 6MM BLACK Part No: 0780 Part No: 0779 Part No: 0778 Description: PVC SLEEVING 8MM BLACK Description: PVC SLEEVING 10MM BLACK Description: PVC SLEEVING 12MM BLACK Part No: 0782 Part No: 0783 Part No: 4354 Description: PVC SLEEVING 16MM BLACK Description: PVC SLEEVING 20MM BLACK Description: PVC SLEEVING 25MM BLACK APT 148 Cable Terminals and Accessories Bootlace Crimps (Ferrules) RCT stocks a large range of bootlace crimps (ferrules) to suit all types of electrical applications. For further technical information please contact your nearest RCT branch. Part No: 4028 Part No: 11442 Description: BOOTLACE FERRULE BLACK 1.5MM Description: BOOTLACE FERRULE BLUE 0.75MM Description: BOOTLACE FERRULE BLUE 2 x 4.0MM Part No: 9228 Part No: 10147 Part No: 9204 Description: BOOTLACE FERRULE BLUE 2.5MM Description: BOOTLACE FERRULE GREEN 6.0MM Description: BOOTLACE FERRULE GREEN 6.2MM Part No: 9230 Part No: 11794 Part No: 9275 Description: BOOTLACE FERRULE GREY 2 x 0.75MM TWIN ENTRY Description: BOOTLACE FERRULE GREY 4.0MM Description: BOOTLACE FERRULE RED 1.0MM Part No: 10235 Part No: 10079 Description: BOOTLACE FERRULE WHITE 0.5MM Description: BOOTLACE FERRULE ASSORTED TERMINAL KIT Specialised Electrical Equipment Part No: 2435 149 APT Cable Terminals and Accessories Copper Lugs RCT stocks a wide range of copper lugs to suit all types of wiring applications. For further technical information, please contact your nearest RCT branch. Specialised Electrical Equipment Part No: 7569 Part No: 9053 Part No: 0800 Description: TERMINAL COPPER LUG M10 x 16mm2 Description: TERMINAL COPPER LUG M10 x 25mm2 Description: TERMINAL COPPER LUG M10 x 50mm2 Part No: 0802 Part No: 0833 Part No: 0801 Description: TERMINAL COPPER LUG M10 x 70mm2 Description: TERMINAL COPPER LUG M11 x 25mm2 Description: TERMINAL COPPER LUG M12 x 50mm2 Part No: 0803 Part No: 0804 Part No: 1222 Description: TERMINAL COPPER LUG M12 x 70mm2 Description: TERMINAL COPPER LUG M12 x 95mm2 Description: TERMINAL COPPER LUG M4 X 3mm2 APT 150 Part No: 9051 Part No: 7570 Description: TERMINAL COPPER LUG M5 x 4mm2 Description: TERMINAL COPPER LUG M6 x 10mm2 Description: TERMINAL COPPER LUG M6 x 16mm2 Part No: 9052 Part No: 0796 Part No: 0797 Description: TERMINAL COPPER LUG M6 x 16mm2 Description: TERMINAL COPPER LUG M6 x 4mm2 Description: TERMINAL COPPER LUG M8 x 16mm2 Part No: 0798 Part No: 0799 Part No: 9056 Description: TERMINAL COPPER LUG M8 x 25mm2 Description: TERMINAL COPPER LUG M8 x 50mm2 Description: TERMINAL COPPER LUG M8 x 70mm2 Specialised Electrical Equipment Part No: 0795 151 APT Cable Terminals and Accessories Crimps and Terminals RCT stocks a wide range of terminals and crimps to suit all types of wiring applications. For further technical information, please contact your nearest RCT branch. Specialised Electrical Equipment Part No: 0823 Part No: 9134 Part No: 9135 Description: TERMINAL INSULATED BULLET BLUE FEMALE Description: TERMINAL INSULATED BULLET BLUE MALE Description: TERMINAL INSULATED BULLET RED FEMALE Part No: 9133 Part No: 1006 Part No: 0824 Description: TERMINAL INSULATED BULLET RED MALE Description: TERMINAL INSULATED EYE BLUE 10.5MM Description: TERMINAL INSULATED EYE BLUE 4.2MM Part No: 0825 Part No: 0826 Part No: 1003 Description: TERMINAL INSULATED EYE BLUE 4.8MM Description: TERMINAL INSULATED EYE BLUE 6.6MM Description: TERMINAL INSULATED EYE BLUE 8.2MM Part No: 9139 Part No: 9140 Part No: 9141 Description: TERMINAL INSULATED EYE RED 3.4MM Description: TERMINAL INSULATED EYE RED 4.2MM Description: TERMINAL INSULATED EYE RED 5.0MM APT 152 Part No: 9142 Part No: 9143 Description: TERMINAL INSULATED EYE RED 6.4MM Description: TERMINAL INSULATED EYE RED 6.6MM Description: TERMINAL INSULATED EYE RED 8.2MM Part No: 2450 Part No: 1007 Part No: 0830 Description: TERMINAL INSULATED EYE RED 8.4MM Description: TERMINAL INSULATED EYE YELLOW 10.0MM Description: TERMINAL INSULATED EYE YELLOW 13.0MM Part No: 0853 Part No: 1005 Part No: 0827 Description: TERMINAL INSULATED EYE YELLOW 3.4MM Description: TERMINAL INSULATED EYE YELLOW 4.0MM Description: TERMINAL INSULATED EYE YELLOW 5.8MM Part No: 9152 Part No: 0828 Part No: 0829 Description: TERMINAL INSULATED EYE YELLOW 5MM Description: TERMINAL INSULATED EYE YELLOW 6.6MM Description: TERMINAL INSULATED EYE YELLOW 8.2MM Part No: 9064 Part No: 9063 Part No: 9088 Description: TERMINAL INSULATED INLINE JOINER BLUE Description: TERMINAL INSULATED INLINE JOINER RED Description: TERMINAL INSULATED INLINE JOINER YELLOW 153 Specialised Electrical Equipment Part No: 0820 APT Specialised Electrical Equipment Part No: 0821 Part No: 9119 Part No: 9118 Description: TERMINAL INSULATED SPADE BLUE 6.3MM FEMALE Description: TERMINAL INSULATED SPADE BLUE 6.3MM MALE Description: TERMINAL INSULATED SPADE RED 6.3MM MALE Part No: 0822 Part No: 7621 Part No: 0809 Description: TERMINAL INSULATED SPADE YELLOW 6.3MM FEMALE Description: TERMINAL NON INSULATED FEMALE SPADE 6.3MM TO SUIT 2006 PROBE Description: TERMINAL NON INSULATED SPADE DOUBLE ENTRY 6.3MM FEMALE Part No: 1152 Part No: 0513 Part No: 0817 Description: TERMINAL NON INSULATED SPADE FLAG TERMINAL 6.3MM FEMALE Description: TERMINAL NON INSULATED SPADE SINGLE ENTRY 6.3MM FEMALE Description: TERMINAL NON INSULATED SPADE SINGLE ENTRY 6.3MM MALE Part No: 0807 Part No: 10630 Part No: 10359 Description: TERMINAL NON INSULATED SPADE SINGLE ENTRY 8.0MM FEMALE Description: TERMINAL EYE 4MM RED HEATSHRINK NARVA # 56360 Description: TERMINAL BLADE MALE BLUE 6.3MM PACKET OF 100 HELLA # 8518 Part No: 10360 Part No: 10631 Part No: 10632 Description: TERMINAL LINK YELLOW PKT OF 50 HELLA # 8532 Description: TERMINAL EYE 6.3MM BLUE HEATSHRINK NARVA # 56366 Description: TERMINAL SPADE BLUE MALE HEATSHRINK NARVA # 56322 APT 154 Part No: 10633 Part No: 10080 Description: TERMINAL SPADE FEMALE RED HEATSHRINK NARVA # 56328 Description: TERMINAL KIT (ASSORTED) Connectors Anderson The innovative Anderson connectors provide cost effective reliability, design flexibility and safety for your product’s manufacture, installation and maintenance. For further information, please contact your nearest RCT branch. Part No: 0707 Part No: 4389 Part No: 4390 Description: 50 AMP ANDERSON PLUG KIT Description: 175 AMP ANDERSON PLUG KIT Description: ANDERSON PLUG COVER - BLACK Specialised Electrical Equipment Part No: 10701 Description: CONTACT TO SUIT ANDERSON SB50 / PP75 SERIES 10 / 12AWG 155 APT Connectors Din (Hirschmann) RCT stocks a large range of Hirschmann connectors to suit all of your din plug terminal needs. All connectors are fitted with a PG11 gland and rated to IP65. For further information, please contact your nearest RCT branch. Part No: 0425 Part No: 3176 Part No: 0271 Description: DIN PLUG 3 TERMINAL 24V LED INDICATOR Description: DIN PLUG 3 TERMINAL 24V LED INDICATOR DIODE PROTECTED Description: DIN PLUG 4 TERMINAL 24V (COMPACT) Part No: 4997 Description: DIN PLUG 4 TERMINAL BLACK (STANDARD) Specialised Electrical Equipment APT 156 Connectors Sure Seal RCT stocks a range of Sure Seal electrical connectors, ideal for repairs on machines where a corrosion resistant repair is required. • Available in 1 to 10 contact • Blocking contact available • Easy fitment • Universal applications For further information, please contact your nearest RCT branch. Part No: 3458 Part No: 4907 Description: PLUG RUBBER 1 CONTACT FEMALE Description: PLUG RUBBER 1 CONTACT MALE Description: PLUG RUBBER 2 CONTACT FEMALE Part No: 2912 Part No: 0229 Part No: 2097 Description: PLUG RUBBER 2 CONTACT MALE Description: PLUG RUBBER 3 CONTACT FEMALE Description: PLUG RUBBER 3 CONTACT MALE Part No: 0017 Part No: 1427 Part No: 0508 Description: PLUG RUBBER 4 CONTACT FEMALE Description: PLUG RUBBER 4 CONTACT MALE Description: PLUG RUBBER 7 CONTACT FEMALE Part No: 0506 Part No: 6491 Part No: 5056 Description: PLUG RUBBER 7 CONTACT MALE Description: PLUG RUBBER 10 CONTACT FEMALE Description: PLUG RUBBER 10 CONTACT MALE Part No: 2939 Part No: 1164 Description: CONTACT PIN Description: CONTACT SOCKET Specialised Electrical Equipment Part No: 4996 157 APT Connectors Trailer RCT stocks a wide range of trailer connectors to suit all types of wiring applications. For further information, please contact your nearest RCT branch. Part No: 0806 Part No: 9061 Part No: 9137 Description: TRAILER SOCKET METAL 7 PIN ROUND Description: TRAILER PLUG METAL 7 PIN ROUND Description: TRAILER CONNECTOR 7 PIN PLUG AUTOMOTIVE Connectors - Military Style (Cannon Plugs) Cannon (Milspec) Cable Joiner - Standard Cannon plugs (MS series connectors) incorporate a threaded coupling, single keyway with 1 - 104 contact configurations. This range of connectors was originally designed for the aeronautics industry but is now widely used in many other fields. They are particularly suitable for commercial applications requiring low cost, reliable connectors. For further information, please contact your nearest RCT branch. Specialised Electrical Equipment Part No: 6416 Part No: 1404 Part No: 10366 Description: CABLE MOUNT FEMALE PLUG 3 PIN SIZE 10 SHELL MS3101E10SL-3P Description: CABLE MOUNT FEMALE PLUG 3 PIN SIZE 14 SHELL MS3101A14S-7P Description: CABLE MOUNT FEMALE PLUG 3 SOCKET SIZE 14 SHELL MS3101E14S-7S Part No: 6142 Part No: 3665 Part No: 3666 Description: CABLE MOUNT FEMALE PLUG 5 SOCKET SIZE 14 SHELL MS3101E14S-5S Description: CABLE MOUNT FEMALE PLUG 10 PIN SIZE 18 SHELL MS3101E18-1P Description: CABLE MOUNT FEMALE PLUG 10 SOCKET SIZE 18 SHELL MS3101E18-1S Part No: 9635 Part No: 4551 Description: CABLE MOUNT FEMALE PLUG 14 PIN SIZE 20 SHELL MS3101E20-27S Description: CABLE MOUNT FEMALE PLUG 17 PIN SIZE 20 SHELL MS3101A20-29P APT 158 Connectors - Military Style (Cannon Plugs) Cannon (Milspec) Cable Mount - 90 Degree - Standard Cannon plugs (MS series connectors) incorporate a threaded coupling, single keyway with 1 - 104 contact configurations. This range of connectors was originally designed for the aeronautics industry but is now widely used in many other fields. They are particularly suitable for commercial applications requiring low cost, reliable connectors. For further information, please contact your nearest RCT branch. Part No: 9487 Part No: 5197 Part No: 9915 Description: CABLE MOUNT FEMALE 90 DEGREE 2 SOCKET SIZE 10 SHELL MS3108E10SL-4S Description: CABLE MOUNT FEMALE 90 DEGREE 3 SOCKET SIZE 10 SHELL MS3108E10SL-3S Description: CABLE MOUNT FEMALE 90 DEGREE 3 SOCKET SIZE 14 SHELL MS3108E14S-7S Part No: 9558 Part No: 9559 Part No: 4235 Description: CABLE MOUNT FEMALE 90 DEGREE 5 SOCKET SIZE 14 SHELL MS3108E14S-5S Description: CABLE MOUNT FEMALE 90 DEGREE 6 PIN SIZE 14 SHELL MS3108E14S-6P Description: CABLE MOUNT FEMALE 90 DEGREE 6 SOCKET SIZE 14 SHELL MS3108E14S-6S Part No: 0517 Part No: 9560 Part No: 4487 Description: CABLE MOUNT FEMALE 90 DEGREE 7 PIN SIZE 16 SHELL MS3108E16S-1S Description: CABLE MOUNT FEMALE 90 DEGREE 19 SOCKET SIZE 22 SHELL MS3108E22-14S Description: CABLE MOUNT FEMALE 90 DEGREE 24 PIN SIZE 24 SHELL MS3108E24-28P Part No: 4667 Specialised Electrical Equipment Description: CABLE MOUNT FEMALE 90 DEGREE 24 SOCKET SIZE 24 SHELL MS3108E24-28S 159 APT Connectors - Military Style (Cannon Plugs) Cannon (Milspec) Cable Mount - Bayonet Cannon plugs (MS series connectors) incorporate a threaded coupling, single keyway with 1 - 104 contact configurations. This range of connectors was originally designed for the aeronautics industry but is now widely used in many other fields. They are particularly suitable for commercial applications requiring low cost, reliable connectors. For further information, please contact your nearest RCT branch. Part No: 3382 Part No: 1553 Part No: 0353 Description: CABLE MOUNT FEMALE BAYONET 4 PIN SIZE 8 SHELL MS3116E8-4P Description: CABLE MOUNT FEMALE BAYONET 4 SOCKET SIZE 8 SHELL MS3116F8-4S Description: CABLE MOUNT FEMALE BAYONET 5 SOCKET SIZE 14 SHELL MS3116F14-5S Part No: 1048 Part No: 7975 Part No: 6368 Description: CABLE MOUNT FEMALE BAYONET 6 PIN SIZE 10 SHELL MS3116E10-6P Description: CABLE MOUNT FEMALE BAYONET 8 SOCKET SIZE 12 SHELL MS3116F12-8S Description: CABLE MOUNT FEMALE BAYONET 12 PIN SIZE 14 SHELL MS3116F14-12P Part No: 1154 Part No: 0184 Part No: 9398 Description: CABLE MOUNT FEMALE BAYONET 16 SOCKET SIZE 20 SHELL MS3116F20-16S Description: CABLE MOUNT FEMALE BAYONET 23 PIN SIZE 16 SHELL MS3116S16-23P Description: CABLE MOUNT FEMALE BAYONET 26 SOCKET SIZE 16 SHELL MS3116F16-26S Part No: 8922 Part No: 8921 Part No: 10627 Description: CABLE MOUNT FEMALE BAYONET 35 PIN SIZE 28 SHELL MS3106E28-15PB Description: CABLE MOUNT FEMALE BAYONET 35 SOCKET SIZE 28 SHELL MS3106E28-15SB Description: CABLE MOUNT MALE BAYONET 23 PIN SIZE 16 SHELL MS3118F16-23P Specialised Electrical Equipment APT 160 Connectors - Military Style (Cannon Plugs) Cannon (Milspec) Cable Mount - Standard Cannon plugs (MS series connectors) incorporate a threaded coupling, single keyway with 1 - 104 contact configurations. This range of connectors was originally designed for the aeronautics industry but is now widely used in many other fields. They are particularly suitable for commercial applications requiring low cost, reliable connectors. Part No: 9610 Part No: 6582 Part No: 1762 Description: CABLE MOUNT FEMALE 2 PIN SIZE 10 SHELL MS3106E10SL-4P Description: CABLE MOUNT FEMALE 2 SOCKET SIZE 10 SHELL MS3106E10SL-4S Description: CABLE MOUNT FEMALE 2 SOCKET SIZE 12 SHELL MS3106E12S-3S Part No: 0240 Part No: 8702 Part No: 8387 Description: CABLE MOUNT FEMALE 3 PIN SIZE 10 SHELL MS3106E10SL-3P Description: CABLE MOUNT FEMALE 3 PIN SIZE 14 SHELL MS3106E14S-7P Description: CABLE MOUNT FEMALE 3 SOCKET SIZE 10 SHELL MS3106E10SL-3S Part No: 7095 Part No: 0073 Part No: 7788 Description: CABLE MOUNT FEMALE 3 SOCKET SIZE 14 SHELL MS3106E14S-7S Description: CABLE MOUNT FEMALE 4 PIN SIZE 14 SHELL MS3106E14S-2P Description: CABLE MOUNT FEMALE 4 SOCKET SIZE 14 SHELL MS3106E14S-2S Part No: 0322 Part No: 3679 Part No: 3199 Description: CABLE MOUNT FEMALE 5 PIN SIZE 14 SHELL MS3106E14S-5P Description: CABLE MOUNT FEMALE 5 SOCKET SIZE 14 SHELL MS3106E14S-5S Description: CABLE MOUNT FEMALE 5 SOCKET SIZE 18 SHELL MS3106E18-11S Part No: 9618 Part No: 5050 Part No: 1847 Description: CABLE MOUNT FEMALE 6 PIN SIZE 14 SHELL MS3106E14S-6P Description: CABLE MOUNT FEMALE 6 SOCKET SIZE 14 SHELL MS3106E14S-6S Description: CABLE MOUNT FEMALE 7 PIN SIZE 16 SHELL MS3106E16S-1P Part No: 1718 Part No: 3680 Part No: 0285 Description: CABLE MOUNT FEMALE 7 PIN SIZE 20 SHELL MS3106E20-15P Description: CABLE MOUNT FEMALE 7 SOCKET SIZE 16 SHELL MS3106E16S-1S Description: CABLE MOUNT FEMALE 7 SOCKET SIZE 20 SHELL MS3106E20-15S Part No: 2438 Part No: 3681 Part No: 3678 Description: CABLE MOUNT FEMALE 8 PIN SIZE 18 SHELL MS3106E18S-8P Description: CABLE MOUNT FEMALE 8 SOCKET SIZE 18 SHELL MS3106E18-8S Description: CABLE MOUNT FEMALE 9 SOCKET SIZE 20 SHELL MS3106A20-18S Part No: 1656 Part No: 2553 Part No: 1530 Description: CABLE MOUNT FEMALE 10 PIN SIZE 18 SHELL MS3106E18-1P Description: CABLE MOUNT FEMALE 10 SOCKET SIZE 18 SHELL MS3106E18-1S Description: CABLE MOUNT FEMALE 14 PIN SIZE 20 SHELL MS3106E20-27P 161 Specialised Electrical Equipment For further information, please contact your nearest RCT branch. APT Part No: 0360 Part No: 4221 Part No: 3682 Description: CABLE MOUNT FEMALE 14 SOCKET SIZE 20 SHELL MS3106E20-27S Description: CABLE MOUNT FEMALE 16 PIN SIZE 24 SHELL MS3106E24-7S Description: CABLE MOUNT FEMALE 17 PIN SIZE 20 SHELL MS3106E20-29P Part No: 9612 Part No: 9415 Part No: 6879 Description: CABLE MOUNT FEMALE 17 SOCKET SIZE 20 SHELL MS3106E20-29S Description: CABLE MOUNT FEMALE 19 PIN SIZE 22 SHELL MS3106E22-14P Description: CABLE MOUNT FEMALE 19 SOCKET SIZE 22 SHELL MS3106E22-14S Part No: 9987 Part No: 7771 Part No: 1860 Description: CABLE MOUNT FEMALE 24 PIN SIZE 24 SHELL MS3106E24-28P Description: CABLE MOUNT FEMALE 24 SOCKET SIZE 24 SHELL MS3106E24-28S Description: CABLE MOUNT FEMALE 37 PIN SIZE 28 SHELL MS3106E28-21P Connectors - Military Style (Cannon Plugs) Cannon (Milspec) Dust Caps Cannon plugs (MS series connectors) incorporate a threaded coupling, single keyway with 1 - 104 contact configurations. This range of connectors was originally designed for the aeronautics industry but is now widely used in many other fields. They are particularly suitable for commercial applications requiring low cost, reliable connectors. For further information, please contact your nearest RCT branch. Specialised Electrical Equipment Part No: 8503 Part No: 0904 Description: DUST CAP SIZE 10 FEMALE MS25043-10D Description: DUST CAP SIZE 10 MALE MS25042-10D Part No: 0034 Part No: 1358 Part No: 6094 Description: DUST CAP SIZE 14 FEMALE MS25043-14D Description: DUST CAP SIZE 14 MALE MS25042-14D Description: DUST CAP SIZE 16 FEMALE MS25043-16D Part No: 10555 Part No: 2126 Part No: 9634 Description: DUST CAP FEMALE SHELL 14C BAYONET Description: DUST CAP BAYONET SIZE 16 FEMALE MS3181-16 Description: DUST CAP SIZE 18 FEMALE MS25043-18D Part No: 0043 Part No: 3662 Part No: 3661 Description: DUST CAP SIZE 20 FEMALE MS25043-20D Description: DUST CAP SIZE 22 FEMALE MS25043-22D Description: DUST CAP SIZE 22 MALE MS25042-22D Part No: 1817 Part No: 4513 Description: DUST CAP SIZE 24 FEMALE MS25043-24D Description: DUST CAP SIZE 24 MALE MS25042-24D APT 162 Part No: 3812 Description: DUST CAP BAYONET SIZE 10 FEMALE MS3181-10C Connectors - Military Style (Cannon Plugs) Cannon (Milspec) Panel Mount - Bayonet Cannon plugs (MS series connectors) incorporate a threaded coupling, single keyway with 1 - 104 contact configurations. This range of connectors was originally designed for the aeronautics industry but is now widely used in many other fields. They are particularly suitable for commercial applications requiring low cost, reliable connectors. For further information, please contact your nearest RCT branch. Part No: 0143 Part No: 1040 Description: PANEL MOUNT MALE BAYONET 4 SOCKET SIZE 8 SHELL MS3112E8-4S Description: PANEL MOUNT MALE BAYONET 8 PIN SIZE 12 SHELL MS3112E12-8P Description: PANEL MOUNT MALE BAYONET 10 SOCKET SIZE 12 SHELL MS3112E12-10S Part No: 6371 Part No: 2013 Part No: 0194 Description: PANEL MOUNT MALE BAYONET 12 SOCKET SIZE 14 SHELL MS3112E14-12S Description: PANEL MOUNT MALE BAYONET 16 PIN SIZE 20 SHELL MS3112E20-16P Description: PANEL MOUNT MALE BAYONET 23 SOCKET SIZE 16 SHELL MS3112E16-23S Part No: 4748 Part No: 8908 Part No: 8930 Description: PANEL MOUNT MALE BAYONET 26 PIN SIZE 16 SHELL MS3112E16-26P Description: PANEL MOUNT MALE BAYONET 35 PIN SIZE 28 SHELL MS3102E28-15PB Description: PANEL MOUNT MALE BAYONET 35 SOCKET SIZE 28 SHELL MS3102E28-15SB Part No: 4954 Part No: 11107 Description: CABLE MOUNT FEMALE BAYONET 90 DEGREE 6 PIN SIZE 10 SHELL MS3118E10-6P Description: CABLE MOUNT FEMALE BAYONET 90 DEGREE 6 SOCKET SIZE 10 SHELL MS3118E10-6S Specialised Electrical Equipment Part No: 3376 163 APT Connectors - Military Style (Cannon Plugs) Cannon (Milspec) Panel Mount - Standard Cannon plugs (MS series connectors) incorporate a threaded coupling, single keyway with 1 - 104 contact configurations. This range of connectors was originally designed for the aeronautics industry but is now widely used in many other fields. They are particularly suitable for commercial applications requiring low cost, reliable connectors. For further information, please contact your nearest RCT branch. Specialised Electrical Equipment Part No: 7528 Part No: 0001 Part No: 9631 Description: PANEL MOUNT MALE 2 PIN SIZE 10 SHELL MS3102E10SL-4P Description: PANEL MOUNT MALE 2 PIN SIZE 12 SHELL MS3102E12S-3P Description: PANEL MOUNT MALE 2 PIN SIZE 14 SHELL MS3102R14S-9P Part No: 3229 Part No: 3364 Part No: 0239 Description: PANEL MOUNT MALE 3 PIN SIZE 10 SHELL MS3102E10SL-3P Description: PANEL MOUNT MALE 3 PIN SIZE 14 SHELL MS3102E14S-7P Description: PANEL MOUNT MALE 3 SOCKET SIZE 10 SHELL MS3102E10SL-3S Part No: 5150 Part No: 4279 Part No: 2602 Description: PANEL MOUNT MALE 3 SOCKET SIZE 14 SHELL MS3102E14S-7S Description: PANEL MOUNT MALE 4 PIN SIZE 14 SHELL MS3102E14S-2P Description: PANEL MOUNT MALE 4 SOCKET SIZE 14 SHELL MS3102E14S-2S Part No: 3668 Part No: 0712 Part No: 3672 Description: PANEL MOUNT MALE 5 PIN SIZE 14 SHELL MS3102E14S-5P Description: PANEL MOUNT MALE 5 PIN SIZE 16 SHELL MS3102E16S-8P Description: PANEL MOUNT MALE 5 PIN SIZE 18 SHELL MS3102E18-11P Part No: 2932 Part No: 1658 Part No: 5133 Description: PANEL MOUNT MALE 5 SOCKET SIZE 14 SHELL MS3102E14S-5S Description: PANEL MOUNT MALE 6 PIN SIZE 14 SHELL MS3102E14S-6P Description: PANEL MOUNT MALE 6 SOCKET SIZE 14 SHELL MS3102E14S-6S Part No: 3670 Part No: 0284 Part No: 3671 Description: PANEL MOUNT MALE 7 PIN SIZE 16 SHELL MS3102E16S-1P Description: PANEL MOUNT MALE 7 PIN SIZE 20 SHELL MS3102E20-15P Description: PANEL MOUNT MALE 7 SOCKET SIZE 16 SHELL MS3102E16S-1S Part No: 1719 Part No: 3674 Part No: 2439 Description: PANEL MOUNT MALE 7 SOCKET SIZE 20 SHELL MS3102E20-15S Description: PANEL MOUNT MALE 8 PIN SIZE 18 SHELL MS3102E18-8P Description: PANEL MOUNT MALE 8 SOCKET SIZE 18 SHELL MS3102E18S-8S Part No: 5829 Part No: 3673 Part No: 9284 Description: PANEL MOUNT MALE 10 PIN SIZE 18 SHELL MS3102E18-1P Description: PANEL MOUNT MALE 10 SOCKET SIZE 18 SHELL MS3102E18-1S Description: PANEL MOUNT MALE 14 PIN SIZE 20 SHELL MS3102E20-27P APT 164 Part No: 3676 Part No: 3677 Description: PANEL MOUNT MALE 14 SOCKET SIZE 20 SHELL MS3102E20-27S Description: PANEL MOUNT MALE 17 SOCKET SIZE 20 SHELL MS3102E20-29S Description: PANEL MOUNT MALE 19 SOCKET SIZE 22 SHELL MS3102E22-14S Part No: 8923 Part No: 8340 Part No: 1458 Description: PANEL MOUNT MALE 19 PIN SIZE 22 SHELL MS3102E22-14P Description: PANEL MOUNT MALE 24 PIN SIZE 24 SHELL MS3102E24-28P Description: PANEL MOUNT MALE 24 SOCKET SIZE 28 SHELL MS3102E24-28S Part No: 1859 Part No: 5136 Description: PANEL MOUNT MALE 37 CKET SIZE 28 SHELL MS3102E28-21S Description: PANEL MOUNT MALE 37 PIN SIZE 28 SHELL MS3102E28-21P Specialised Electrical Equipment Part No: 3675 165 APT Consumables Adhesives and Sealants RCT stock a wide range of adhesives and sealants for industrial and mining applications. Please feel free to contact us for adhesives and sealants to suit your requirements. Part No: 0301 Part No: 0300 Part No: 1657 Description: ARALDITE 5MIN 200ML KIT Description: ARALDITE 6-8HR 200ML KIT Description: SILICON ADHESIVE CLEAR 310G Part No: 7993 Part No: 0439 Part No: 6774 Description: SILICONE ADHESIVE CLEAR 310G RTV Description: STUD LOCK 50ML LOCTITE # 262 Description: SUPERGLUE ADHESIVE 3ML Part No: 0899 Part No: 3541 Part No: 11211 Description: THREAD SEALANT 50ML LOCTITE # 567 Description: THREAD SEALANT 6ML LOCTITE # 567 Description: THREAD LOCK 50ML LOCTITE # 243 Specialised Electrical Equipment APT 166 Consumables Aerosols RCT stocks a wide range of aerosol products including contact cleaners, terminal sprays, galvanising and protective aerosol sprays. For further information, please contact your nearest RCT branch. Part No: 4066 Part No: 4068 Description: ELECTRICAL CONTACT CLEANER - FLAMMABLE (ZENOX) Description: KWIK CLEAN DEGREASER (ZENOX) Description: WHITE SPRAY GREASE WITH TEFLON (ZENOX) Part No: 4070 Part No: 4071 Part No: 4062 Description: MOLY CHAIN LUBE (ZENOX) Description: COLD GALVANISING SPRAY (ZENOX) Description: BRAKE & PARTS CLEANER (ZENOX) Part No: 4064 Part No: 4065 Part No: 6634 Description: SILICON PLUS LUBE (ZENOX) Description: MARINE GRADE WD LUBE (ZENOX) Description: BATTERY MAINTENANCE SPRAY (CRC) Specialised Electrical Equipment Part No: 4061 167 APT Part No: 8218 Part No: 8824 Part No: 2031 Description: BUTANE GAS Description: CLEANER CO-CONTACT 350GM SPRAY (CRC) Description: AEROSOL LECTRA SHIELD (CRC) Part No: 8365 Part No: 7348 Part No: 2044 Description: LACQUER PLASTICOTE (CRC) Description: PRIMER RED KILRUST PAINT 300G Description: SEALER SPRAY URETHANE 300G RED (CRC) Part No: 3132 Part No: 0580 Description: TERMINAL PROTECTOR SPRAY 400G (ZENOX) Description: LECTRA CLEAN 400GM SPRAY (CRC) . Specialised Electrical Equipment APT 168 Consumables Conformal Coating, Electrical Grease and Wire Lubricant RCT stocks a wide range of wiring harness accessories to suit all types of applications. • Slipry Loob is a wax base product used in the manufacture of wiring harnesses. This non-toxic, environmentally safe product is usually injected into the conduit to assist in pulling the wire through sleeving. • Nitto adhesive PVC electrical tape (lead free) - Available in 19mm x 20m only For further information, please contact your nearest RCT branch. Part No: 5384 Part No: 11113 Description: SEALING COMPOUND Description: ELECTRICAL JOINING COMPOUND Description: DI-ELECTRICAL GREASE 50ML SYRINGE LANOTEC Part No: 2800 Part No: 9659 Part No: 9416 Description: ELECTROGAURD GREASE 50G SYRING Description: O'RING VALVE GREASE 100G Description: WIRE PULLING LUBRICANT (SLIPRY LOOB) Part No: 9814 Part No: 9498 Description: CONFORMAL COATING LACQUER Description: CONFORMAL COATING 3.5KG Specialised Electrical Equipment Part No: 9648 169 APT Consumables Solder RCT stock a range of solder for industrial and mining applications. For further information, please contact your nearest RCT branch. Part No: 7625 Part No: 9879 Part No: 9876 Description: SOLDER ACID CORE 3.2MM Description: SOLDER RESIN CORE 1.6MM 60/40 Description: SOLDER RESIN CORE 3.2MM 50/50 Part No: 1132 Part No: 4401 Description: SOLDER RESIN CORE 6.1MM 50/50 Description: SOLDER WICK 2.8MM Consumables Tapes RCT stock a wide range of tapes for industrial and mining applications. For further information, please contact your nearest RCT branch. Specialised Electrical Equipment Part No: 3106 Part No: 2353 Part No: 7493 Description: AMALGAMATING TAPE 19MM Description: AMALGAMATING TAPE 25MM Description: DENSO TAPE # 600 100MM x 10M Part No: 6462 Part No: 7626 Part No: 7627 Description: DENSO TAPE # 600 50MM x 10M Description: DENSYL TAPE # 610 100MM x 10M Description: DENSYL TAPE # 610 50MM x 10M APT 170 Part No: 8013 Part No: 3596 Part No: 0617 Description: LIQUID TAPE BLACK 118ML Description: LIQUID TAPE RED 118ML Description: PVC ELECTRICAL TAPE BLACK 19MM x 20M Consumables Vapour Guard Capsules The AusProTec™ range of vapour capsules has been included to provide a range of corrosion inhibiting products to protect critical wiring and housed components. Part No: 4321 Part No: 0549 Description: VAPOUR GUARD CAPSULE - 2 CUBIC FEET Description: VAPOUR GUARD CAPSULE - 15 CUBIC FEET Specialised Electrical Equipment For further technical information, please contact your nearest RCT branch. 171 APT Deutsch Connectors Deutsch DRC Series The Deutsch DRC series is designed with a higher number of terminal counts. By utilising a rectangular shape, the DRC is best suited to be compatible with externally or internally mounted electronic modules. The Deutsch DRC series is completely environmentally sealed, using silicone seals and wire grommets that withstand engine and transmission temperatures. The rugged thermoplastic housings are designed to meet field abuse for the life of the equipment. Specialised Electrical Equipment Part No: 7818 Part No: 6706 Part No: 2192 Description: PLUG DRC 10 - 24 PIN MOULDED CONTACTS DEUTSCH # DRC10-24-P Description: PLUG FLANGED DRC 10 - 40 PIN MOULDED CONTACTS DEUTSCH # DRC10-40-P Description: RECEPTACLE FLANGE MOUNT DRC 12 - 24 PIN "A" LOCKING KEY DEUTSCH # DRC12-24-PA Part No: 2191 Part No: 0522 Part No: 2190 Description: RECEPTACLE FLANGE MOUNT DRC 12 - 40 PIN "A" LOCKING KEY DEUTSCH # DRC12-40-PA Description: RECEPTACLE FLANGE MOUNT DRC 12 - 40 PIN "B" LOCKING KEY DEUTSCH # DRC12-40-PB Description: RECEPTACLE FLANGE MOUNT DRC 12 - 70 PIN "A" LOCKING KEY DEUTSCH # DRC12-70-PA Part No: 3505 Part No: 5020 Description: RECEPTACLE IN LINE DRC 14 - 24 PIN "A" LOCKING KEY DEUTSCH # DRC14-24-PA Description: RECEPTACLE IN LINE DRC 14 - 40 PIN "A" LOCKING KEY DEUTSCH # DRC14-40-PA APT 172 Part No: 6386 Description: RECEPTACLE IN LINE DRC 14 - 70 PIN "A" LOCKING KEY DEUTSCH # DRC14-70-PA Part No: 8747 Part No: 6658 Part No: 8748 Description: PLUG MALE DRC 16 - 24 SOCKET "A" LOCKING KEY DEUTSCH # DRC16-24-SA Description: PLUG MALE DRC 16 - 40 SOCKET UNIVERSAL KEY DEUTSCH # DRC16-40-S Description: PLUG MALE DRC 16 - 40 SOCKET "A" LOCKING KEY DEUTSCH # DRC16-40-SA Part No: 4475 Part No: 2188 Part No: 4719 Description: PLUG MALE DRC 16 - 40 SOCKET "B" LOCKING KEY DEUTSCH # DRC16-40-SB Description: PLUG MALE DRC 16 - 70 SOCKET "A" LOCKING KEY DEUTSCH # DRC16-70-SA Description: PLUG MALE DRC 16 - 40 SOCKET KEYED DEUTSCH # DRC18-40-SA Deutsch Connectors Deutsch DRC Series (Seals and Boots) Designed specifically for Deutsch Industrial connectors, LADD Industries high quality line of boots provide a professional looking finishing touch for your Deutsch connectors. Deutsch boots are made of durable Plastisol. These slip-on boots are not only aesthetically appealing but also provide increased protection from dirt, paint overspray, and pressure washing. Part No: 0602 Part No: 0080 Part No: 0050 Description: SEAL TO SUIT DRC 40 PIN PLUG (STANDARD) DEUTSCH # 0513-010-4006 Description: SEAL TO SUIT DRC 40 PIN PLUG (CAT ECM) DEUTSCH # DRC40-SEAL Description: SEAL TO SUIT DRC 70 PIN PLUG DEUTSCH # DRC70-SEAL Part No: 3114 Part No: 3432 Part No: 3115 Description: BOOT TO SUIT DRC 24 SERIES PLUGS DEUTSCH # DRC24-BT Description: BOOT TO SUIT DRC 40 PIN PLUG DEUTSCH # DRC40-BT Description: BOOT TO SUIT DRC 70 PIN PLUG DEUTSCH # DRC70-BT 173 Specialised Electrical Equipment Replacement seals for DRC connectors are also available. APT Deutsch Connectors Deutsch DT Series (Grey) Deutsch DT Series of environmentally sealed connectors are designed specifically for cable to cable applications on the engine or transmission, under the hood, on the chassis or cab. Where signal level circuits are installed in harsh environments, where even a small degradation in connection may be critical, the Deutsch DT Series general purpose connectors provide reliability and performance at the lowest cost. Thermoplastic (-55°C to + 125°C rated) housings and silicone seals are used to allow the connector to withstand conditions of extreme temperature and moisture. The connector may be employed with either solid-copper crimp type contacts for critical circuits or budget-minded stamped and formed contacts. In either selection, the spring action is designed in the socket and shrouded by a stainless steel hood that provides closed entry for positive axial alignment during mating and eliminates probe damage from occurring. Contact insertion and withdrawal require no special tools and are retained in locked position by dielectric fingers, moulded as an integral part of the housing. Secondary locks are assembled at the mating interfaces. If, by chance, the secondary locks are not properly seated during assembly, they will be pressed into locked position during the mating of the connector. Specialised Electrical Equipment Part No: 2185 Part No: 1960 Part No: 2021 Description: CONNECTOR RECEPTACLE 2 PIN DEUTSCH # DT04-2P Description: LOCK WEDGE 2 PIN DEUTSCH # W2-P Description: CONNECTOR PLUG 2 SOCKET DEUTSCH # DT06-2S Part No: 1957 Part No: 3599 Part No: 2183 Description: LOCK WEDGE 2 SOCKET DEUTSCH # W2-S Description: REPLACEMENT SEAL TO SUIT 2021 (DT06-2S) DEUTSCH # 1010-016-0206 Description: CONNECTOR RECEPTACLE 3 PIN DEUTSCH # DT04-3P Part No: 2024 Part No: 2018 Part No: 1955 Description: LOCK WEDGE 3 PIN DEUTSCH # W3-P Description: CONNECTOR PLUG 3 SOCKET DEUTSCH # DT06-3S Description: LOCK WEDGE 3 SOCKET DEUTSCH # W3-S APT 174 Part No: 6155 Part No: 2182 Description: REPLACEMENT SEAL TO SUIT 2018 (DT06-3S) DEUTSCH # 1010-002-0306 Description: CONNECTOR RECEPATCLE 3 PIN 3 WAY Y CONNECTOR DEUTSCH # DT04-3P-P007 Description: CONNECTOR RECEPTACLE 4 PIN DEUTSCH # DT04-4P Part No: 1954 Part No: 2016 Part No: 2268 Description: LOCK WEDGE 4 PIN DEUTSCH # W4-P Description: CONNECTOR PLUG 4 SOCKET DEUTSCH # DT06-4S Description: LOCK WEDGE 4 SOCKET DEUTSCH # W4-S Part No: 7021 Part No: 2180 Part No: 1952 Description: REPLACEMENT SEAL TO SUIT 2016 (DT06-4S) DEUTSCH # 1010-009-0406 Description: CONNECTOR RECEPTACLE 6 PIN DEUTSCH # DT04-6P Description: LOCK WEDGE 6 PIN DEUTSCH # W6-P Part No: 2014 Part No: 1951 Part No: 6549 Description: CONNECTOR PLUG 6 SOCKET DEUTSCH DT06-6S Description: LOCK WEDGE 6 SOCKET DEUTSCH W6-S Description: REPLACEMENT SEAL TO SUIT 2014 (DT06-6S) DEUTSCH # 1010-017-0606 Part No: 1984 Part No: 1949 Part No: 2010 Description: CONNECTOR RECEPTACLE 8 PIN DEUTSCH # DT04-8P Description: LOCK WEDGE 8 PIN DEUTSCH # W8-P Description: CONNECTOR PLUG 8 SOCKET DEUTSCH # DT06-8S 175 Specialised Electrical Equipment Part No: 8914 APT Part No: 1948 Part No: 3070 Part No: 2186 Description: LOCK WEDGE 8 SOCKET DEUTSCH # W8-S Description: REPLACEMENT SEAL TO SUIT 2010 (DT06-8S) DEUTSCH # 1010-007-0806 Description: CONNECTOR RECEPTACLE 12 PIN DEUTSCH # DT04-12P Part No: 1944 Part No: 2022 Part No: 1959 Description: LOCK WEDGE 12 PIN DEUTSCH # W12-P Description: CONNECTOR PLUG 12 SOCKET DEUTSCH # DT06-12S Description: LOCK WEDGE 12 SOCKET DEUTSCH # W12-S Part No: 4060 Part No: 4059 Part No: 4058 Description: DT SERIES CONNECTOR KIT 2 TERMINAL Description: DT SERIES CONNECTOR KIT 3 TERMINAL Description: DT SERIES CONNECTOR KIT 4 TERMINAL Part No: 4057 Part No: 4056 Part No: 4055 Description: DT SERIES CONNECTOR KIT 6 TERMINAL Description: DT SERIES CONNECTOR KIT 8 TERMINAL Description: DT SERIES CONNECTOR KIT 12 TERMINAL Specialised Electrical Equipment APT 176 Deutsch Connectors Deutsch DT Series Mounting and Boots Part No: 2953 Part No: 4110 Part No: 4776 Description: MOUNT HEAVY DUTY TO SUIT DT SERIES DEUTSCH PLUGS (METAL) Description: MOUNT HEAVY DUTY OFFSET TO SUIT DT SERIES DEUTSCH PLUGS (METAL) Description: MOUNT TO SUIT DT SERIES CONNECTOR (2, 3, 4, 6 & 12 CONTACT ONLY) DEUTSCH # 1011-026-0205 Part No: 4778 Part No: 8071 Part No: 6925 Description: MOUNT TO SUIT DT SERIES CONNECTOR (8 CONTACT ONLY) DEUTSCH # 1011-027-0805 Description: BOOT TO SUIT DT SERIES CONNECTOR 3 WAY PIN END (120MM LONG) DEUTSCH # DT3P-BT-120 Description: BOOT TO SUIT DT SERIES CONNECTOR 3 WAY PIN END (SHORT VERSION) DEUTSCH # DT3P-BT Part No: 8081 Part No: 3827 Part No: 3952 Description: BACKSHELL TO SUIT 2186 12 PIN 90° Description: BACKSHELL TO SUIT 2186 12 PIN STRAIGHT Description: BACKSHELL TO SUIT 2022 12 SOCKET 90° Part No: 4063 Part No: 4241 Part No: 4483 Description: BACKSHELL TO SUIT 2022 12 SOCKET STRAIGHT Description: BACKSHELL TO SUIT 2185 2 PIN 90° Description: BACKSHELL TO SUIT 2185 2 PIN STRAIGHT Part No: 4592 Part No: 3742 Part No: 8764 Description: BACKSHELL TO SUIT 2021 2 SOCKET 90° Description: BACKSHELL TO SUIT 2021 2 SOCKET STRAIGHT Description: BACKSHELL TO SUIT 2183 3 PIN 90° Part No: 6738 Part No: 9996 Part No: 3987 Description: BACKSHELL TO SUIT 2183 3 PIN STRAIGHT Description: BACKSHELL TO SUIT 2018 3 SOCKET 90° Description: BACKSHELL TO SUIT 2018 3 SOCKET STRAIGHT Part No: 3735 Part No: 3771 Part No: 6297 Description: BACKSHELL TO SUIT 2182 4 PIN 90° Description: BACKSHELL TO SUIT 2182 4 PIN STRAIGHT Description: BACKSHELL TO SUIT 2016 4 SOCKET 90° Part No: 8928 Part No: 8989 Part No: 4130 Description: BACKSHELL TO SUIT 2016 4 SOCKET STRAIGHT Description: BACKSHELL TO SUIT 2180 6 PIN 90° Description: BACKSHELL TO SUIT 2180 6 PIN STRAIGHT Part No: 0939 Part No: 8873 Part No: 3787 Description: BACKSHELL TO SUIT 2014 6 SOCKET 90° Description: BACKSHELL TO SUIT 2014 6 SOCKET STRAIGHT Description: BACKSHELL TO SUIT 1985 8 PIN STRAIGHT Part No: 5347 Part No: 7367 Description: BACKSHELL TO SUIT 2010 8 SOCKET 90° Description: BACKSHELL TO SUIT 2010 8 SOCKET STRAIGHT 177 Specialised Electrical Equipment Designed specifically for Deutsch Industrial connectors the Deutsch high quality line of boots and mounting clips provide a professional finishing touch for your Deutsch connectors. Deutsch boots are made of durable Plastisol. These slip-on boots are not only aesthetically appealing but also provide increased protection from dirt, paint overspray, and pressure washing. APT Deutsch Connectors Deutsch DTHD Series Deutsch developed the DTHD Series for those applications requiring a complete, environmentally sealed, single power circuit termination. DTHD plugs and receptacles can be permanently assembled with thermoplastic end caps that prevent removal of the silicone wire seal grommets. Designed for diesel engines, electronic fuel injectors, automatic transmissions, ABS brakes and other applications that involve fuel and oil exposure. These end caps provide the additional reliability required for critical wiring circuits. Specialised Electrical Equipment Part No: 4844 Part No: 4847 Part No: 4845 Description: RECEPTACLE HEAVY DUTY 1 TERMINAL 25 AMP # 12 CONTACT (PIN END) Description: PLUG HEAVY DUTY 1 TERMINAL 25 AMP # 12 CONTACT (SOCKET END) Description: RECEPTACLE HEAVY DUTY 1 TERMINAL 60 AMP # 8 CONTACT(PIN END) Part No: 4842 Part No: 4846 Part No: 4843 Description: PLUG HEAVY DUTY 1 TERMINAL 60 AMP # 8 CONTACT (SOCKET END) Description: RECEPTACLE HEAVY DUTY 1 TERMINAL 100 AMP # 4 CONTACT(PIN END) Description: PLUG HEAVY DUTY 1 TERMINAL 100 AMP # 4 CONTACT (SOCKET END) Part No: 4870 Part No: 4848 Part No: 4917 Description: DTHD SERIES CONNECTOR KIT 1 TERMINAL 25 AMP # 12 TERMINAL Description: DTHD SERIES CONNECTOR KIT 1 TERMINAL 60 AMP # 8 TERMINAL Description: DTHD SERIES CONNECTOR KIT 1 TERMINAL 100 AMP # 4 TERMINAL APT 178 Deutsch Connectors Deutsch DTM Series Deutsch DTM Series of transportation connectors feature a miniature contact with an enhanced design based on the world class, field-proven Deutsch “DT Series”. The DTM is the connector to be used in harsh environments where reliable signal circuits are critical to operating performance. Typical applications include on or around the engine, the transmission and under the hood. In fact, everywhere data signals or critical electronic circuits go, the field proven Deutsch design of the DTM will provide reliable peak connector performance. The low cost, size 20 contacts terminate AWG 16 to 22 gauge wire (0.5mm2 to 1.5mm2). Closed entry socket (female) contacts featuring spring action fingers are protected by a stainless steel hood. This allows for positive axial alignment while mating and prevents probe damage during testing. Thermoplastic housings offer a wide operating temperature range (-55°C to +125°C). Silicone rear wire and internal peripheral interface seals allow the DTM to withstand moisture and fluids. Part No: 5705 Part No: 5713 Description: CONNECTOR RECEPTACLE 2 PIN COMPLETE WITH LOCKING WEDGE DEUTSCH # DTM04-2P-W Description: CONNECTOR RECEPTACLE 2 SOCKET COMPLETE WITH LOCKING WEDGE DEUTSCH # DTM06-2S-W Description: CONNECTOR RECEPTACLE 3 PIN COMPLETE WITH LOCKING WEDGE DEUTSCH # DTM04-3P-W Part No: 5709 Part No: 5707 Part No: 5715 Description: CONNECTOR RECEPTACLE 3 SOCKET COMPLETE WITH LOCKING WEDGE DEUTSCH # DTM06-3S-W Description: CONNECTOR RECEPTACLE 4 PIN COMPLETE WITH LOCKING WEDGE DEUTSCH # DTM04-4P-W Description: CONNECTOR RECEPTACLE 4 SOCKET COMPLETE WITH LOCKING WEDGE DEUTSCH # DTM06-4S-W Specialised Electrical Equipment Part No: 5710 179 APT Specialised Electrical Equipment Part No: 5706 Part No: 5716 Part No: 5704 Description: CONNECTOR RECEPTACLE 6 PIN COMPLETE WITH LOCKING WEDGE DEUTSCH # DTM04-6P-W Description: CONNECTOR RECEPTACLE 6 SOCKET COMPLETE WITH LOCKING WEDGE DEUTSCH # DTM06-6S-W Description: CONNECTOR RECEPTACLE 8 PIN COMPLETE WITH LOCKING WEDGE DEUTSCH # DTM04-8P-W Part No: 5717 Part No: 5711 Part No: 5703 Description: CONNECTOR RECEPTACLE 8 SOCKET COMPLETE WITH LOCKING WEDGE DEUTSCH # DTM06-8S-W Description: CONNECTOR RECEPTACLE 12 PIN COMPLETE WITH LOCKING WEDGE DEUTSCH # DTM04-12P-W Description: CONNECTOR RECEPTACLE 12 SOCKET COMPLETE WITH LOCKING WEDGE DEUTSCH # DTM06-12S-W Part No: 7146 Part No: 7147 Part No: 7148 Description: DTM SERIES CONNECTOR KIT 2 TERMINAL Description: DTM SERIES CONNECTOR KIT 3 TERMINAL Description: DTM SERIES CONNECTOR KIT 4 TERMINAL Part No: 7149 Part No: 7150 Part No: 7153 Description: DTM SERIES CONNECTOR KIT 6 TERMINAL Description: DTM SERIES CONNECTOR KIT 8 TERMINAL Description: DTM SERIES CONNECTOR KIT 12 TERMINAL APT 180 Deutsch Connectors Deutsch DTM Series Boots Designed specifically for Deutsch Industrial connectors, this high quality line of boots provides a professional finishing touch for your Deutsch connectors. Made of durable Plastisol, these slip-on boots are not only aesthetically appealing but also provide increased protection from dirt, paint overspray and pressure washing. Part No: 5691 Part No: 5697 Part No: 5692 Description: BOOT TO SUIT DTM SERIES CONNECTOR 2 WAY PIN END DEUTSCH # DTM2P-BT Description: BOOT TO SUIT DTM SERIES CONNECTOR 2 WAY SOCKET END DEUTSCH # DTM2S-BT Description: BOOT TO SUIT DTM SERIES CONNECTOR 3 WAY PIN END DEUTSCH # DTM3P-BT Part No: 5698 Part No: 5693 Part No: 5699 Description: BOOT TO SUIT DTM SERIES CONNECTOR 3 WAY SOCKET END DEUTSCH # DTM3S-BT Description: BOOT TO SUIT DTM SERIES CONNECTOR 4 WAY PIN END DEUTSCH # DTM4P-BT Description: BOOT TO SUIT DTM SERIES CONNECTOR 4 WAY SOCKET END DEUTSCH # DTM4S-BT Part No: 5694 Part No: 5700 Part No: 5695 Description: BOOT TO SUIT DTM SERIES CONNECTOR 6 WAY PIN END DEUTSCH # DTM6P-BT Description: BOOT TO SUIT DTM SERIES CONNECTOR 6 WAY SOCKET END DEUTSCH # DTM6S-BT Description: BOOT TO SUIT DTM SERIES CONNECTOR 8 WAY PIN END DEUTSCH # DTM8P-BT Part No: 5701 Part No: 5696 Description: BOOT TO SUIT DTM SERIES CONNECTOR 8 WAY SOCKET END DEUTSCH # DTM8S-BT Description: BOOT TO SUIT DTM SERIES CONNECTOR 12 WAY PIN END DEUTSCH # DTM12P-BT Part No: 5702 Specialised Electrical Equipment Description: BOOT TO SUIT DTM SERIES CONNECTOR 12 WAY SOCKET END DEUTSCH # DTM12S-BT 181 APT Deutsch Connectors Deutsch DTP Series Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin, inexpensive connectors. The series meets the same specifications as the DTM and DT but offers the designer the ability to use multiple 12 gauge contacts, each with a 25 amp continuous capacity, within a single shell. Based on the DTM overall design, it provides protection for the interfacial seal located within the receptacle shell. Standard multi-seal grommet is used in both the plug and receptacle. Currently available in two and four pin configurations. Specialised Electrical Equipment Part No: 5447 Part No: 5442 Part No: 5443 Description: RECEPTACLE DTP SERIES 2 PIN # 12 CONTACT DEUTSCH # DTP04-2P Description: LOCKING WEDGE TO SUIT 5442 DEUTSCH # WP-2P Description: PLUG DTP SERIES 2 SOCKET # 12 CONTACT DEUTSCH # DTP06-2S Part No: 5440 Part No: 5446 Part No: 5441 Description: LOCKING WEDGE TO SUIT 5443 DEUTSCH # WP-3S Description: RECEPTACLE DTP SERIES 4 PIN # 12 CONTACT DEUTSCH # DTP04-4P Description: LOCKING WEDGE TO SUIT 5446 DEUTSCH # WP-6P Part No: 5445 Part No: 5439 Part No: 5438 Description: PLUG DTP SERIES 4 SOCKET # 12 CONTACT DEUTSCH # DTP06-4S Description: LOCKING WEDGE TO SUIT 5445 DEUTSCH # WP-4S Description: DTP SERIES CONNECTOR KIT 2 TERMINAL Part No: 5437 Description: DTP SERIES CONNECTOR KIT 4 TERMINAL APT 182 Deutsch Connectors Deutsch HD10 Series The HD10 series is designed to provide a solution to today’s interconnection problems found in the heavy duty industry. The HD10 is a thermoplastic cylindrical connector utilising crimp type contacts that are quickly and easily inserted and removed. The HD10 series eliminates problems associated with assembly and maintenance time and is designed for long service life. Part No: 1998 Part No: 9205 Description: RECEPTACLE SQUARE FLANGES MALE HD10 - 3 PIN 3 x #16 CONTACT DEUTSCH # HD10-3-96P Description: RECEPTACLE SQUARE FLANGES MALE (NON THREADED) HD10 - 5 PIN 5 x #16 CONTACT DEUTSCH # HD10-5-16P Description: RECEPTACLE SQUARE FLANGES MALE HD10 - 6 PIN 6 x #12 CONTACT DEUTSCH # HD10-6-12P Part No: 1997 Part No: 1996 Part No: 2150 Description: RECEPTACLE SQUARE FLANGES MALE HD10 - 6 PIN 6 x #16 CONTACT DEUTSCH # HD10-6-96P Description: RECEPTACLE SQUARE FLANGES MALE (NON THREADED) HD10 - 9 PIN 9 x #16 CONTACT (STANDARD LAYOUT) DEUTSCH # HD10-9-16P Description: RECEPTACLE SQUARE FLANGES MALE HD10 - 9 PIN 9 x #16 CONTACT (ALTERNATE LAYOUT) DEUTSCH # HD10-9-96P Part No: 5856 Part No: 2632 Part No: 1994 Description: PLUG INLINE MALE HD14 - 3 PIN 3 x #16 CONTACT DEUTSCH # HD14-3-96P Description: PLUG INLINE MALE HD14 - 9 PIN 9 x #16 CONTACT DEUTSCH # HD14-9-96P Description: PLUG FEMALE HD16 - 3 SOCKET 3 x #16 CONTACT DEUTSCH # HD16-3-96S Part No: 2630 Part No: 2004 Part No: 1993 Description: PLUG FEMALE HD16 - 4 SOCKET 1 x #4, 3 x #16 CONTACT DEUTSCH # HD16-4-4S Description: PLUG FEMALE HD16 - 5 SOCKET 5 x #16 CONTACT DEUTSCH # HD16-5-16S Description: PLUG FEMALE HD16 - 6 SOCKET 6 x #16 CONTACT DEUTSCH # HD16-6-96S Part No: 1990 Part No: 1989 Description: PLUG FEMALE HD16 - 9 SOCKET - 9 #16 CONTACT (STANDARD LAYOUT) DEUTSCH # HD16-9-16S Description: PLUG FEMALE HD16 - 9 SOCKET - 9 #16 CONTACT (ALTERNATE LAYOUT) DEUTSCH # HD16-9-96S Specialised Electrical Equipment Part No: 1999 183 APT Deutsch Connectors Deutsch HD30 Series A heavy duty, environmentally sealed, multi pin circular connector, featuring quick connect-disconnect bayonet coupling, single hole bulkhead mounting, silicone seals and a rear insertion/removal contact system. The Deutsch HD30 series connector was developed to meet the needs of the heavy duty equipment and transportation industries for rugged, multi pin, sealed connector systems. Specialised Electrical Equipment Part No: 5983 Part No: 6624 Part No: 0487 Description: RECEPTACLE MALE WITH CLAMP ASSEMBLY HD34 - 14 PIN 14 x #16 CONTACT DEUTSCH # HD34-18-14PN-059 Description: RECEPTACLE MALE HD34 - 14 SOCKET 14 x #16 CONTACT DEUTSCH # HD34-18-14SN Description: RECEPTACLE MALE HD34 - 14 PIN - 14 x #16 CONTACT DEUTSCH # HD34-24-14PN Part No: 5391 Part No: 2069 Part No: 0930 Description: RECEPTACLE MALE WITH CABLE CLAMP ASSEMBLY HD34 - 14 PIN - 14 x #16 CONTACT DEUTSCH # HD34-24-14PN-059 Description: RECEPTACLE MALE HD34 - 16 PIN - 16 x #12 CONTACT DEUTSCH # HD34-24-16PN Description: RECEPTACLE MALE HD34 - 21 PIN - 4 x #12, 17 x #16 CONTACT DEUTSCH # HD34-24-21PN Part No: 2070 Part No: 3634 Part No: 3636 Description: RECEPTACLE MALE HD34 - 23 PIN - 23 x #16 CONTACT DEUTSCH # HD24-24-23PN Description: RECEPTACLE MALE WITH CABLE CLAMP ASSEMBLY HD34 - 23 PIN - 23 x #16 CONTACT DEUTSCH # HD24-24-23PN-059 Description: RECEPTACLE MALE WITH CABLE CLAMP ASSEMBLY HD34 - 23 SOCKET - 23 x #16 CONTACT DEUTSCH # HD24-24-23SN-059 APT 184 Part No: 2068 Part No: 5380 Description: RECEPTACLE MALE HD34 - 31 PIN - 31 x #16 CONTACT DEUTSCH # HD34-24-31PT Description: RECEPTACLE MALE HD34 9 PIN - 1 x #4, 2 x #8, 6 x #12 CONTACT DEUTSCH # HD34-24-9PN Description: PLUG FEMALE WITH CLAMP ASSEMBLY HD36 - 14 PIN 14 x #16 CONTACT DEUTSCH # HD36-18-14PN-059 Part No: 0500 Part No: 5379 Part No: 0395 Description: PLUG FEMALE HD36 - 14 SOCKET - 14 x #16 CONTACT DEUTSCH # HD36-18-14SN Description: PLUG FEMALE WITH CLAMP ASSEMBLY HD36 - 14 SOCKET - 14 x #16 CONTACT DEUTSCH # HD36-18-14SN-059 Description: PLUG FEMALE HD36 8 PIN - 8 x #12 CONTACT DEUTSCH # HD36-18-8PN Part No: 0488 Part No: 0490 Part No: 5382 Description: PLUG FEMALE HD36 - 8 SOCKET - 8 x #12 CONTACT DEUTSCH # HD36-18-8SN Description: PLUG FEMALE HD36 - 14 SOCKET - 1 x #4, 1 x #12, 12 x #16 CONTACT DEUTSCH # HD36-24-14SN\ Description: PLUG FEMALE WITH CLAMP ASSEMBLY HD36 - 14 SOCKET - 1 x #4, 1 x #12, 12 x #16 CONTACT DEUTSCH # HD36-24-14SN-059 Part No: 0489 Part No: 2794 Part No: 0440 Description: PLUG FEMALE HD36 - 16 SOCKET - 16 x #12 CONTACT DEUTSCH # HD36-24-16SN Description: PLUG FEMALE HD36 - 18 SOCKET - 1 x #8, 3 x #12, 14 x #16 CONTACT DEUTSCH # HD36-24-18SN Description: PLUG FEMALE HD36 - 19 SOCKET - 6 x #12, 13 x #16 CONTACT DEUTSCH # HD36-24-19SN 185 APT Specialised Electrical Equipment Part No: 2149 Part No: 0477 Part No: 0380 Part No: 3637 Description: PLUG FEMALE HD36 - 21 SOCKET - 4 x #12, 17 x #16 CONTACT DEUTSCH # HD36-24-21SN Description: PLUG FEMALE HD36 - 23 PIN - 23 x #16 CONTACT DEUTSCH # HD36-24-23PN Description: PLUG FEMALE WITH CLAMP ASSEMBLY HD36 - 23 PIN - 23 x #16 CONTACT DEUTSCH # HD36-24-23PN-059 Part No: 6811 Part No: 3640 Part No: 0435 Description: PLUG FEMALE HD36 - 23 SOCKET - 23 x #16 CONTACT DEUTSCH # HD36-24-23SN Description: PLUG FEMALE HD36 - 23 SOCKET - 23 x #16 CONTACT DEUTSCH # HD36-24-23SN-059 Description: PLUG FEMALE HD36 - 31 SOCKET - 31 x #16 CONTACT DEUTSCH # HD36-24-31ST Part No: 0501 Part No: 2072 Description: PLUG FEMALE HD36 - 9 PIN - 1 x #4, 2 x #8, 6 x #12 CONTACT DEUTSCH # HD36-24-9PN Description: PLUG FEMALE HD36 - 9 SOCKET - 1 x #4, 2 x #8, 6 x #12 CONTACT DEUTSCH # HD36-24-9SN Specialised Electrical Equipment APT 186 Deutsch Connectors Deutsch HD30 Series (Locknuts, Washers and Dustcaps) Designed specifically for HD series connectors, Deutsch high quality line of mounting nuts and washers provide a professional mounting option for Deutsch circular connectors. Part No: 2121 Part No: 4358 Description: LOCKWASHER TO SUIT HD 34 SERIES RECEPTACLE DEUTSCH # 112264 Description: PANEL NUT TO SUIT HD34-24 SERIES DEUTSCH # 112263-90 Description: PANEL NUT TO SUIT HD34-18 SERIES DEUTSCH # 114020-90 Part No: 5398 Part No: 5399 Part No: 5397 Description: CLAMP ASSEMBLY TO SUIT HD36-18 SERIES DEUTSCH # 0409-201-1800 Description: CLAMP ASSEMBLY TO SUIT HD36-24 SERIES DEUTSCH # 0409-201-2400 Description: SHELL ASSEMBLY TO SUIT HD36-18 SERIES DEUTSCH # 0428-204-1890 Part No: 5401 Part No: 6625 Part No: 6636 Description: SHELL ASSEMBLY TO SUIT HD 36-24 SERIES DEUTSCH # 0428-204-2490 Description: DUST CAP TO SUIT HD36-18 PLUG DEUTSCH # HDC36-18= Description: DUST CAP TO SUIT HD34-18 PLUG DEUTSCH # HDC34-18 Specialised Electrical Equipment Part No: 2119 187 APT Deutsch Connectors Deutsch Kits (Field Service) DEUTSCH CONNECTING SYSTEM Deutsch connectors are one of the most widely used connectors on the market because they are extremely weather and impact resistant. The DT series Deutsch plugs can withstand operating temperatures peaking as high as +125°C. For these reasons Deutsch plugs are commonly used by Original Equipment Manufacturers across a diverse range of industries including mining, automotive, industrial and marine. The kit includes all plugs, receptacles, wedges, contacts and seals for 2, 3, 4, 6, 8 & 12 terminal DT series connectors. DEUTSCH (DT SERIES) KIT The AusProTec™ Deutsch (DT series) kit has been designed to assist service technicians to perform cable and wiring jobs that require more than one size of connector. The kit contains a selection of DT series Deutsch plugs, wedges, seals, receptacles, contacts and a field service crimper. The Deutsch components are housed in a compact steel case, which is both durable and easy to carry. The Deutsch (DT series) kit is an essential tool for any technician servicing equipment utilising Deutsch connectors. The kit is ideal for workshop environments, on site and field service applications. DEUTSCH DTM SERIES KIT The AusProTec™ Deutsch (DTM series) kit has been designed to assist service technicians to perform cable and wiring jobs that require more than one size of connector. The kit contains a selection of DTM series Deutsch plugs, wedges, receptacles, contacts and contact removal tools. The Deutsch components are housed in a compact steel case, which is both durable and easy to carry. The Deutsch (DTM series) kit is an essential tool for any technician servicing equipment utilising Deutsch Data connectors. The kit is ideal for workshop environments, on site and field service applications. Part No: 3544 Part No: 9980 Part No: 9225 Description: DEUTSCH DT SERIES FIELD SERVICE KIT WITH OEM CRIMPERS Description: DEUTSCH DT SERIES FIELD SERVICE KIT WITHOUT CRIMPERS Description: DEUTSCH DT SERIES FIELD SERVICE KIT WITH AFTER MARKET CRIMPERS Specialised Electrical Equipment Part No: 9660 Description: DEUTSCH DTM SERIES FIELD SERVICE KIT WITHOUT CRIMPERS APT 188 Deutsch Connectors Deutsch Pins and Sockets Deutsch pins and sockets are designed for use where wire termination costs are of primary concern without sacrificing the reliability of electrical circuits. Part No: 0529 Part No: 8977 Part No: 5720 Description: CONTACT PIN # 20 (3MM) Description: CONTACT SOCKET # 20 (3MM) Description: CONTACT PIN # 20 GOLD (3MM) Part No: 5719 Part No: 2095 Part No: 2076 Description: CONTACT SOCKET # 20 GOLD (3MM) Description: CONTACT PIN # 16 (FVT) Description: CONTACT SOCKET # 16 (FVT) Part No: 5682 Part No: 8934 Part No: 2077 Description: CONTACT PIN # 16 (4MM) GREEN BAND Description: CONTACT SOCKET # 16 (4MM) GREEN BAND Description: CONTACT PIN # 12 (5MM) Part No: 0552 Part No: 2078 Part No: 2075 Description: CONTACT SOCKET # 12 (5MM) Description: CONTACT PIN # 8 Description: CONTACT SOCKET # 8 189 Specialised Electrical Equipment The formed contact series is made on a precision stamping machine using flat strip stock, then a durable and corrosion proof nickel plating is applied. Gold is an optional finish. All Deutsch industrial terminals protect the split socket tines with a closed entry stainless steel sleeve or sleeveless design. APT Part No: 0866 Part No: 0163 Part No: 2118 Description: CONTACT PIN # 4 (8MM) Description: CONTACT SOCKET # 4 (8MM) Description: BLOCKING CONTACT TO SUIT # 16 CONTACT Part No: 2117 Part No: 0560 Description: BLOCKING CONTACT TO SUIT # 8 CONTACT Description: BLOCKING CONTACT TO SUIT # 4 CONTACT Deutsch Connectors Deutsch Tooling (Crimp Tools) 9 Deutsch crimping tools have been designed for use where termination of pins and sockets is required without sacrificing the reliability of electrical circuits. These tools have been specifically designed to correctly crimp all pins and sockets to the highest standard. Part No: 3186 Part No: 8892 Part No: 4381 Description: CRIMP TOOL FIELD CRIMPERS ORIGINAL DEUTSCH Description: CRIMP TOOL # 16 CONTACTS RATCHET AFTER MARKET Description: CRIMP TOOL # 16 CONTACT BARREL TYPE CRIMPS Specialised Electrical Equipment Part No: 6022 Description: CRIMP TOOL # 20 CONTACTS RATCHET AFTER MARKET APT 190 Deutsch Connectors Deutsch Tooling (Removal and Insertion) Deutsch removal and insertion tools have been designed for use where servicing of pins and sockets is required without sacrificing the reliability of electrical circuits. These tools have been specifically designed to aid in the removal / insertion of pins and sockets without damaging the housing or terminals. Part No: 3177 Part No: 6418 Description: REMOVAL TOOL # 20 RED Description: REMOVAL TOOL # 16 BLUE Description: REMOVAL TOOL # 16 LIGHT BLUE THIN WALL Part No: 9945 Part No: 0754 Part No: 0753 Description: REMOVAL TOOL # 14 GREEN Description: REMOVAL TOOL # 12 YELLOW Description: REMOVAL TOOL # 8 GREEN Part No: 0735 Part No: 6135 Description: REMOVAL TOOL # 4 WHITE Description: INSERTION TOOL HEAVY DUTY Specialised Electrical Equipment Part No: 0859 191 APT Enclosures Adaptor Boxes The AusProTec™ Enclosure range is available in a variety of sizes and materials. The majority of stocked enclosures are sealed to IP56 or greater. For more information, or sizes not listed, please contact your nearest RCT branch. • Constructed from PVC • Various sealing properties – Most exceeding IP56 • Standard steel fixings (most models). Part No: 0787 Part No: 0951 Part No: 8109 Description: ADAPTOR BOX 108 x 108 x 76MM Description: ADAPTOR BOX 211 x 108 x 81MM Description: ADAPTOR BOX 77 x 77 x 54MM Part No: 3936 Description: ADAPTOR BOX 95 x 95 x 90MM Specialised Electrical Equipment APT 192 Enclosures Poly and ABS The AusProTec™ Enclosure range is available in a variety of sizes and materials. The majority of stocked enclosures are sealed to IP65 or greater. • Constructed from Poly or ABS • Various sealing properties – most exceeding IP65 • Stainless steel fixings (most models). Part No: 6498 Part No: 1353 Part No: 6197 Description: ABS ENCLOSURE 10 x 200 x 60MM Description: ABS ENCLOSURE 120 x 200 x 90MM Description: ABS ENCLOSURE 120 x 80 x 55MM Part No: 1669 Part No: 7499 Part No: 1421 Description: ABS ENCLOSURE 120 x 80 x 85MM Description: ABS ENCLOSURE 122 x 120 x 55MM Description: ABS ENCLOSURE 160 x 120 x 90MM Part No: 2322 Part No: 0503 Part No: 7002 Description: ABS ENCLOSURE 160 x 80 x 55MM Description: ABS ENCLOSURE 160 x 80 x 85MM Description: ABS ENCLOSURE 171 x 121 x 80MM Part No: 1964 Part No: 7062 Part No: 1348 Description: ABS ENCLOSURE 80 x 56 x 40MM Description: ABS ENCLOSURE 84 x 72 x 32MM FLANGE MOUNT Description: POLY ENCLOSURE 120 x 220 x 91MM Part No: 3416 Part No: 9594 Part No: 7494 Description: POLY ENCLOSURE 150 x 150 x 80MM Description: POLY ENCLOSURE 160 x 120 x 140MM Description: POLY ENCLOSURE 160 x 260 x 100MM Part No: 8851 Part No: 2417 Part No: 6087 Description: POLY ENCLOSURE 160 x 80 x 85MM Description: POLY ENCLOSURE 182 x 180 x 111MM Description: POLY ENCLOSURE 182 x 180 x 165MM Part No: 8868 Part No: 0276 Part No: 5927 Description: POLY ENCLOSURE 222 x 120 x 90MM Description: POLY ENCLOSURE 240 x 160 x 120MM Description: POLY ENCLOSURE 26 x 56 x 40MM Part No: 7585 Part No: 1745 Part No: 4407 Description: POLY ENCLOSURE 300 x 230 x 85MM Description: POLY ENCLOSURE 340 x 120 x 150MM Description: POLY ENCLOSURE 360 x 160 x 100MM Specialised Electrical Equipment For more information, or sizes not listed, please contact your nearest RCT branch. 193 APT Part No: 8866 Part No: 6472 Part No: 1720 Description: POLY ENCLOSURE 360 x 160 x 90MM Description: POLY ENCLOSURE 360 x 200 x 250MM Description: POLY ENCLOSURE 400 x 250 x 120MM Part No: 6952 Part No: 10479 Description: POLY ENCLOSURE 400 x 360 x 150MM Description: POLY ENCLOSURE 52 x 50 x 35MM Enclosures Stainless Steel, Alloy and Metal In the AusProTec™ Enclosure range is available in a variety of sizes and materials. The majority of stocked enclosures are sealed to IP65 or greater. • Constructed from Alloy or Stainless Steel • Various sealing properties – most exceeding IP65 • Stainless steel fixings (most models). For more information, or sizes not listed, please contact your nearest RCT branch. Specialised Electrical Equipment Part No: 7274 Part No: 11238 Part No: 0317 Description: ALLOY ENCLOSURE 100 x 100 x 80MM Description: ALLOY ENCLOSURE 120 x 79 x 55MM Description: ALLOY ENCLOSURE 122 x 120 x 80MM Part No: 8862 Part No: 7505 Part No: 5848 Description: ALLOY ENCLOSURE 122 x 120 x 90MM Description: ALLOY ENCLOSURE 125 x 80 x 57MM Description: ALLOY ENCLOSURE 150 x 64 x 34MM Part No: 7275 Part No: 7502 Part No: 5789 Description: ALLOY ENCLOSURE 160 x 100 x 80MM Description: ALLOY ENCLOSURE 160 x 160 x 90MM Description: ALLOY ENCLOSURE 171 x 121 x 54MM Part No: 2540 Part No: 7289 Part No: 7504 Description: ALLOY ENCLOSURE 180 x 180 x 100MM Description: ALLOY ENCLOSURE 200 x 100 x 80MM Description: ALLOY ENCLOSURE 220 x 120 x 80MM Part No: 1531 Part No: 7497 Part No: 0068 Description: ALLOY ENCLOSURE 220 x 120 x 90MM Description: ALLOY ENCLOSURE 230 x 200 x 110MM Description: ALLOY ENCLOSURE 260 x 160 x 90MM Part No: 7291 Part No: 4746 Part No: 3956 Description: ALLOY ENCLOSURE 280 x 180 x 100MM Description: ALLOY ENCLOSURE 330 x 230 x 110MM Description: ALLOY ENCLOSURE 360 x 160 x 90MM APT 194 Part No: 9185 Part No: 8863 Part No: 4534 Description: ALLOY ENCLOSURE 400 x 230 x 110MM Description: ALLOY ENCLOSURE 400 x 310 x 110MM Description: ALLOY ENCLOSURE 600 x 230 x 111MM Part No: 7501 Part No: 6793 Part No: 1495 Description: ALLOY ENCLOSURE 80 x 75 x 57MM Description: ENCLOSURE 500 x 700 x 250MM Description: STAINLESS STEEL ENCLOSURE 200 x 200 x 120MM Part No: 1493 Description: STAINLESS STEEL ENCLOSURE 400 x 400 x 270MM Fleet Identification Powerlight Alpha / Numeric LED Fleet Numbers The PowerLight™ Alpha Numeric LED Fleet Numbers have been designed to allow machines to be easily identified from a distance. The LED fleet numbers are clearly visible during the day and at night, making identifying machines a fast and simple process. The LED fleet numbers can be programmed to any alpha numeric combination up to four (4) digits. The ability to program the numbers allows maintenance staff to change numbers from machine to machine. The alpha numeric LED fleet numbers are designed for mining and industrial applications, such as mining machines, buses, loaders and transport trucks. Part No: 4557 Part No: 3773 Description: LED FLEET NUMBER 4 DIGIT Description: KIT PROGRAMMING KIT T/S 4557 Specialised Electrical Equipment Made from powder coated aluminium and with a IP64 rating, the alpha numeric LED fleet numbers are built to withstand the harshest of operating conditions. 195 APT Fleet Identification Powerlight LED Fleet Numbers - Large The PowerLight™ LED Fleet Numbers have been developed for situations where it is difficult to identify machines from a distance. Each plate is 700mm tall and 400mm wide. This means that even from a long range these numbers are clearly visible day or night, making for fast machine identification. Number kits can be configured to make complete fleet numbers. Number kits (0-9) are supplied with a single plate, the correct quantity of red 24V LED strip lamps, electrical terminals and mounting bolts for both the plate itself and the LED strip lamps. Specialised Electrical Equipment Part No: 2470 Part No: 2471 Description: LED FLEET NUMBER KIT 0 Description: LED FLEET NUMBER KIT 1 Part No: 2472 Part No: 2473 Description: LED FLEET NUMBER KIT 2 Description: LED FLEET NUMBER KIT 3 APT 196 Part No: 2475 Description: LED FLEET NUMBER KIT 4 Description: LED FLEET NUMBER KIT 5 Part No: 2476 Part No: 2477 Description: LED FLEET NUMBER KIT 6 Description: LED FLEET NUMBER KIT 7 Part No: 2478 Part No: 2479 Description: LED FLEET NUMBER KIT 8 Description: LED FLEET NUMBER KIT 9 Specialised Electrical Equipment Part No: 2474 197 APT Part No: 2481 Part No: 3646 Part No: 2448 Description: SINGLE DIGIT PLATE ONLY Description: BLANKING PLATE TO SUIT 2481 PLATE Description: LED STRIP LAMP RED 24VDC Part No: 2468 Part No: 8129 Description: MOUNTING RAIL SET (2 RAILS) Description: HEAVY DUTY TERMINAL BLOCK Specialised Electrical Equipment APT 198 Fleet Identification Powerlight LED Fleet Numbers - Light Vehicle The PowerLight™ LED Light Vehicle Fleet Numbers have been developed for situations where it is difficult to identify machines from a distance. Each plate is 275mm tall and 145mm wide. This means that even from a long range these numbers are clearly visible day or night, making for fast machine identification. Number kits can be configured to make complete fleet numbers. Part No: 11149 Part No: 11150 Description: LIGHT VEHICLE LED FLEET NUMBER KIT 0 Description: LIGHT VEHICLE LED FLEET NUMBER KIT 1 Part No: 11151 Part No: 11152 Description: LIGHT VEHICLE LED FLEET NUMBER KIT 2 Description: LIGHT VEHICLE LED FLEET NUMBER KIT 3 199 Specialised Electrical Equipment Number kits (0-9) are supplied with a single plate, the correct quantity of red 12 / 24V LED strip lamps, electrical terminals and mounting bolts for both the plate itself and the LED strip lamps. APT Specialised Electrical Equipment Part No: 11153 Part No: 11154 Description: LIGHT VEHICLE LED FLEET NUMBER KIT 4 Description: LIGHT VEHICLE LED FLEET NUMBER KIT 5 Part No: 11155 Part No: 11156 Description: LIGHT VEHICLE LED FLEET NUMBER KIT 6 Description: LIGHT VEHICLE LED FLEET NUMBER KIT 7 Part No: 11157 Part No: 11158 Description: LIGHT VEHICLE LED FLEET NUMBER KIT 8 Description: LIGHT VEHICLE LED FLEET NUMBER KIT 9 APT 200 Part No: 11271 Part No: 11146 Part No: 11159 Description: SINGLE DIGIT PLATE NUMBER 1 TO SUIT LIGHT VEHICLES Description: SINGLE DIGIT PLATE UNIVERSAL TO SUIT LIGHT VEHICLES Description: BLANKING PLATE PLATE TO SUIT 11271 / 11146 Part No: 11148 Specialised Electrical Equipment Description: LED STRIP LAMP RED MULTI VOLTAGE 201 APT General Auto Electrical Circuit Breakers (Klixon) Klixon circuit breakers (CAT OEM type) are the most widely used and recognised breakers in the earthmoving industry. Klixon breakers are designed to withstand the tough mining environment. Part No: 6920 Part No: 4519 Part No: 4690 Description: CIRCUIT BREAKER AUTOMATIC RESET 10A Description: CIRCUIT BREAKER AUTOMATIC RESET 15A Description: CIRCUIT BREAKER AUTOMATIC RESET 30A Part No: 7337 Part No: 1772 Part No: 1118 Description: CIRCUIT BREAKER AUTOMATIC RESET 8A Description: CIRCUIT BREAKER MANUAL RESET 10A Description: CIRCUIT BREAKER MANUAL RESET 15A Part No: 1528 Part No: 4809 Part No: 1010 Description: CIRCUIT BREAKER MANUAL RESET 20A (BLUE) Description: CIRCUIT BREAKER MANUAL RESET 20A (RED) Description: CIRCUIT BREAKER MANUAL RESET 2A Part No: 0372 Part No: 9505 Part No: 7421 Description: CIRCUIT BREAKER MANUAL RESET 4A Description: CIRCUIT BREAKER MANUAL RESET 30A Description: CIRCUIT BREAKER MANUAL RESET 40A Part No: 8036 Part No: 5563 Part No: 0404 Description: CIRCUIT BREAKER MANUAL RESET 60A (LARGE) Description: CIRCUIT BREAKER MANUAL RESET 60A (SMALL) Description: CIRCUIT BREAKER MANUAL RESET 80A General Auto Electrical Daytime Headlight System Daytime running lights operate from the ignition circuit of a vehicle. Option one automatically switches the vehicle’s headlights on when the ignition is switched on, with option two, the vehicle’s headlights can only be operated when the ignition is on. This increases safety, on or off road. Specialised Electrical Equipment Part No:3438 Part No: 10549 Description: DAYTIME HEADLIGHT CONTROLLER 12V Description: DAYLIGHT HEADLIGHT CONTROLLER 24V APT 202 General Auto Electrical Electronic / Hydraulic Pedals and Actuators These hydraulic pedals and actuators are commonly used on off highway trucks and loaders for throttle control. Maximum operating pressure of 300 PSI, flow rating of 19 litres / min and operating temperature of -20°C to +93°C Part No: 0085 Part No: 2797 Part No: 5501 Description: HYDRAULIC THROTTLE PEDAL - SURFACE MOUNT Description: HYDRAULIC THROTTLE PEDAL - FLOOR MOUNT Description: ELECTRONIC PEDAL (MORSE) - SURFACE MOUNT Part No: 1488 Specialised Electrical Equipment Description: HYDRAULIC THROTTLE ACTUATOR 203 APT General Auto Electrical Fuses and Fuse Holders RCT stock a large range of high quality fuses and holders for industrial and mining applications. Please feel free to contact us for technical information on fuses to suit your requirements. Specialised Electrical Equipment Part No: 8193 Part No: 8194 Part No: 8195 Description: BLADE FUSE AUTOMOTIVE 10 AMP Description: BLADE FUSE AUTOMOTIVE 15 AMP Description: BLADE FUSE AUTOMOTIVE 20 AMP Part No: 8196 Part No: 8190 Part No: 8197 Description: BLADE FUSE AUTOMOTIVE 25 AMP Description: BLADE FUSE AUTOMOTIVE 3 AMP Description: BLADE FUSE AUTOMOTIVE 30 AMP Part No: 0551 Part No: 8191 Part No: 7900 Description: BLADE FUSE AUTOMOTIVE 5 AMP Description: BLADE FUSE AUTOMOTIVE 7.5 AMP Description: BLADE FUSE BOX 4 FUSE HELLA # 8720 Part No: 9216 Part No: 10256 Part No: 9542 Description: BLADE FUSE BOX 6 FUSE HELLA # 8721 Description: BLADE FUSE BOX 8 FUSE HELLA # 8722 Description: BLADE FUSE HOLDER MARINE SPECIFICATION Part No: 7933 Part No: 0663 Part No: 0728 Description: FUSE HOLDER BAYONET LOCK HELLA # 8717 Description: GLASS FUSE AUTOMOTIVE 3AG 1 AMP Description: GLASS FUSE AUTOMOTIVE 3AG 10 AMP Part No: 0357 Part No: 0687 Part No: 0546 Description: GLASS FUSE AUTOMOTIVE 3AG 15 AMP Description: GLASS FUSE AUTOMOTIVE 3AG 2 AMP Description: GLASS FUSE AUTOMOTIVE 3AG 20 AMP Part No: 0547 Part No: 0356 Part No: 0548 Description: GLASS FUSE AUTOMOTIVE 3AG 25 AMP Description: GLASS FUSE AUTOMOTIVE 3AG 3 AMP Description: GLASS FUSE AUTOMOTIVE 3AG 30 AMP Part No: 0339 Part No: 7322 Part No: 3498 Description: GLASS FUSE AUTOMOTIVE 3AG 5 AMP Description: GLASS FUSE AUTOMOTIVE 3AG 7.5 AMP Description: GLASS FUSE HOLDER INLINE 30 AMP Part No: 3142 Part No: 4625 Part No: 4626 Description: GLASS FUSE HOLDER INLINE 15 AMP Description: HEAVY DUTY FUSE 355 AMP Description: HEAVY DUTY FUSE 500 AMP Part No: 8129 Description: HEAVY DUTY FUSE HOLDER TO SUIT 4625 / 4626 APT 204 General Auto Electrical Horns RCT stocks a wide range of horns to suit all types of electrical applications. For further technical information, please contact your nearest RCT branch. Part No:6002 Part No:10253 Description: ELECTRIC HORN 12 VOLT 6 AMP HELLA # 6001 Description: ELECTRIC HORN 24 VOLT 3 AMP HELLA # 6002 Description: ELECTRIC HORN 24 VOLT HIGH NOTE HELLA # 6040 Part No:6637 Part No:6636 Description: AIR HORN SET TWIN 12 VOLT HELLA # 6014 Description: COMPRESSOR HORN KIT 24 VOLT HELLA # 6014 Specialised Electrical Equipment Part No: 7617 205 APT General Auto Electrical Siren Modules and Speakers RCT stocks a range of siren modules and speakers to suit all types of electrical applications. For further technical information, please contact your nearest RCT branch. Part No: 7040 Part No: 7041 Description: SIREN MODULE WITH PA AMPLIFIER RADIO 100 WATT 12 VOLT Description: SIREN SPEAKER 11 OHM 100 WATT TO SUIT 7040 General Auto Electrical Telemecanique A selection of Telemecanique switch gear is used in the manufacture of many of our products. • Contacts can be stacked for particular applications • Mix and match actuators and contact bodies • Proven reliability in field tests For further technical information, please contact your nearest RCT branch. Specialised Electrical Equipment Part No: 5876 Part No: 6467 Part No: 6427 Description: ASSEMBLY PUSH BUTTON TELEMECANIQUE # ZB2-PBA Description: BASE MOUNTING CONTACT BLOCK TELEMECANIQUE # ZB2-BZ103 Description: BODY / FIXING COLLAR TELEMECANIQUE # ZB2-BZ009 Part No: 10297 Part No: 5510 Part No: 10298 Description: BODY WITH 1x N/O CONTACT TELEMECANIQUE # ZB4-BZ101 Description: BODY WITH 1xN/C CONTACT TELEMECANIQUE # ZB2-BZ102 Description: BODY WITH 1xN/C CONTACT TELEMECANIQUE # ZB4-BZ102 Part No: 10293 Part No: 9476 Part No: 3834 Description: BODY WITH 1xN/O & N/C CONTACT TELEMECANIQUE # ZB5-AZ105 Description: BODY WITH 1xN/O CONTACT TELEMECANIQUE # ZB2-BZ101 Description: CONTACT N/C T/S 8918 TELEMECANIQUE # ZENL1121 APT 206 Part No: 10288 Part No: 6460 Description: CONTACT N/O T/S 8918 TELEMECANIQUE # ZENL1111 Description: COVER LOCKABLE FLAP T/S ZB4-BA TELEMECANIQUE # ZB4-BZ66 Description: LABEL EMERGENCY STOP T/S 8918 TELEMECANIQUE # ZBY-9330 Part No: 4008 Part No: 3741 Part No: 7154 Description: MUSHROOM HEAD RED 40MM KEYED TELEMECANIQUE # ZA2-BS14 Description: MUSHROOM HEAD RED 40mm PUSH TELEMECANIQUE # ZB2-BT4 Description: MUSHROOM HEAD RED 40mm TURN TELEMECANIQUE # ZB2-BS54 Part No: 4639 Part No: 4306 Part No: 2906 Description: MUSHROOM HEAD RED PADDLOCK TELEMECANIQUE # ZB2-BT409 Description: PUSHBUTTON BODY ILL N/O TELEMECANIQUE # ZB2-BW061 Description: PUSHBUTTON HEAD RED ILL TELEMECANIQUE # ZB2-BW34 Part No: 7311 Part No: 1750 Part No: 6044 Description: PUSHBUTTON HEAD YELLOW ILL TELEMECANIQUE # ZB2-BW35 Description: SELECTOR HEAD GREEN ILL KNOB TELEMECANIQUE # ZB2-BK123 Description: SELECTOR HEAD LONG HANDLE STAY TELEMECANIQUE # ZB2-BJ2 Part No: 2446 Part No: 3237 Part No: 6452 Description: SELECTOR HEAD MOM/ OFF/MOM KEY TELEMECANIQUE # ZB2-BG7 Description: SELECTOR HEAD SPRING RETURN TELEMECANIQUE # ZB2-BD5 Description: SWITCH CONTACT 2 X N/C TELEMECANIQUE # ZBE-204 Part No: 5675 Part No: 10295 Part No: 4591 Description: SWITCH CONTACT N/C TELEMECANIQUE # ZB2-BE102 Description: SWITCH CONTACT N/C TELEMECANIQUE # ZBE-102 Description: SWITCH CONTACT N/O TELEMECANIQUE # ZB2-BE101 Part No: 4405 Part No: 10296 Part No: 0868 Description: SWITCH HANDLE 3 POSITION TELEMECANIQUE # ZB2-BD3 Description: SWITCH HEAD 3WAY SW/ RETURN R/H TELEMECANIQUE # ZB4-BG08 Description: SWITCH HEAD KEY 3 POS TELEMECANIQUE # ZB2-BG0 Part No: 6461 Part No: 2600 Part No: 3543 Description: SWITCH HEAD KEY SPRING RETURN TELEMECANIQUE # ZB2-BG6 Description: SWITCH HEAD KEY STAY PUT L/H & R/H TELEMECANIQUE # ZB2-BG4 Description: SWITCH HEAD KEY STAY PUT L/H TELEMECANIQUE # ZB2-BG2 Part No: 3969 Part No: 1912 Part No: 8103 Description: SWITCH HEAD MUSHROOM TELEMECANIQUE # ZA2-BS54 Description: SWITCH HEAD STAYPUT TELEMECANIQUE # ZB2-BD2 Description: SWITCH LIMIT 2 POLE 1 X N/O 1 X N/C TELEMECANIQUE # ZCK-M1H29 Part No: 5003 Part No: 5364 Part No: 5274 Description: SWITCH PUSHBUTTON BLACK TELEMECANIQUE # ZB2-BP2 Description: SWITCH PUSHBUTTON GREEN TELEMECANIQUE # ZB2-BP3 Description: SWITCH PUSHBUTTON RED TELEMECANIQUE # ZB2-BP4 Part No: 4188 Part No: 10292 Part No: 10289 Description: SWITCH PUSHBUTTON YELLOW TELEMECANIQUE # ZB2-BP5 Description: SWITCH S/RETURN 3WAY PLASTIC TELEMECANIQUE # ZB5-AD5 Description: SWITCH S/RETURN FLUSH BACK TELEMECANIQUE # ZB4-BA4 Part No: 10290 Part No: 10291 Part No: 10294 Description: SWITCH STAYPUT 2WAY PLASTIC TELEMECANIQUE # ZB5-AD2 Description: SWITCH STAYPUT 3 WAY PLASTIC TELEMECANIQUE # ZB5-AD3 Description: SWITCH CONTACT N/C TELEMECANIQUE # ZBE-101 207 Specialised Electrical Equipment Part No: 2910 APT Instrumentation (Datcon) Gauges and Senders Datcon evolved as a leading supplier of instrumentation to the off-highway and industrial vehicle O.E.M. markets. These gauges have a high impact, moisture resistant assembly and are ideally suited to off highway applications. With easy to read, dual scale graphics, Datcon is an ideal, cost effective solution for your instrumentation needs. Specialised Electrical Equipment Part No: 1671 Part No: 1674 Part No: 0444 Description: AIR PRESSURE GAUGE MECHANICAL - DATCON # 100250 Description: FUEL LEVEL GAUGE 10 - 180 OHMS - DATCON # 100726 Description: FUEL LEVEL GAUGE 240 - 33 OHMS - DATCON # 100176 Part No: 0473 Part No: 0458 Part No: 1677 Description: FUEL LEVEL GAUGE 240 - 33 OHMS 24V - DATCON # 100584 Description: FUEL SENDER 240-33 OHMS - DATCON # 100438 Description: HOURMETER GAUGE 12 / 24V - DATCON # 110190 Part No: 0718 Part No: 1695 Part No: 0476 Description: LIGHT KIT 12V TO SUIT 2" GAUGE - DATCON # 06215-00 Description: LIGHT KIT 24V TO SUIT 2" GAUGE - DATCON # 06294-00 Description: MAGNETIC SENSOR 5/8 UNFx2 - DATCON # 1544-00 Part No: 0433 Part No: 0448 Part No: 0470 Description: OIL PRESSURE GAUGE 0 - 100 PSI 12V - DATCON # 100174 Description: OIL PRESSURE GAUGE 0 - 100 PSI 12V MECHANICAL DATCON # 100188 Description: OIL PRESSURE GAUGE 0 - 100 PSI 24V - DATCON # 100576 Part No: 1679 Part No: 0471 Part No: 0445 Description: OIL PRESSURE GAUGE 0 - 125 PSI 12V - DATCON # 100174 DATCON # 101083 Description: OIL TEMPERATURE GAUGE 140 - 320°C - DATCON # 101580 Description: OIL TEMPERATURE GAUGE 140 - 320°C 12V - DATCON # 100178 Part No: 0709 Part No: 0703 Part No: 1684 Description: PRESSURE SENDER 1/8 NPT 0 - 100 PSI - DATCON # 02505-00 Description: PRESSURE SENDER 1/8 NPT 0 - 125 PSI - DATCON # 02506-00 Description: TACHOMETER / HOURMETER GAUGE 0 - 3000RPM ALTERNATOR PICKUP - DATCON # 103678 Part No: 0455 Part No: 1685 Part No: 1681 Description: TACHOMETER / HOURMETER GAUGE 0 - 4000RPM ALTERNATOR PICKUP - DATCON # 100239 Description: TACHOMETER / HOURMETER GAUGE 0 - 4000RPM ALTERNATOR PICKUP - DATCON # 103684 Description: TACHOMETER GAUGE 0 - 3000RPM ALTERNATOR PICKUP 12 / 24V - DATCON # 103656 Part No: 1682 Part No: 1683 Part No: 0711 Description: TACHOMETER GAUGE 0 - 4000RPM ALTERNATOR PICKUP 12 / 24V - DATCON # 103662 Description: TACHOMETER GAUGE 0 - 4000RPM MAGNETIC PICKUP 12 / 24V - DATCON # 103665 Description: TEMPERATURE SENDER 1/2 NPT HIGH MATCH - DATCON # 02025-00 APT 208 Part No: 0402 Part No: 0710 Part No: 0401 Description: TEMPERATURE SENDER 1/2 NPT LOW MATCH - DATCON # 02020-00 Description: TEMPERATURE SENDER 1/8 NPT HIGH MATCH - DATCON # 02022-00 Description: TEMPERATURE SENDER 1/8 NPT LOW MATCH - DATCON # 02017-00 Part No: 0727 Part No: 3202 Part No: 9832 Description: TEMPERATURE SENDER 3/8 NPT HIGH MATCH - DATCON # 02024-00 Description: TEMPERATURE SENDER 3/8 NPT LOW MATCH - DATCON # 02019.00 Description: VOLTMETER GAUGE 16 / 36V - DATCON # 100264 Part No: 0447 Part No: 0456 Part No: 0721 Description: VOLTMETER GAUGE 16 / 36V COLOUR - DATCON # 100184 Description: VOLTMETER GAUGE 8 / 18V - DATCON # 100262 Description: VOLTMETER GAUGE 8 / 18V COLOUR - DATCON # 100166 Part No: 1689 Part No: 3200 Part No: 0449 Description: WATER TEMPERATURE GAUGE 100 - 240°F 12V - DATCON # 100683 Description: WATER TEMPERATURE GAUGE 100 - 240°F 24V - DATCON # 101586 Description: WATER TEMPERATURE GAUGE 100 - 280°F 144" TUBE DATCON # 100206 Part No: 1769 Specialised Electrical Equipment Description: WATER TEMPERATURE GAUGE 100 - 280°F 216" TUBE DATCON # 100208 209 APT Instrumentation (Murphy) Cascade Panel The Cascade controller offers automatic start and stop control with easy configuration for a broad number of applications. This auto-start controller is designed to fit any engine driven application requiring a simple and robust, automatic start and stop sequence. Pumps, Compressors, Grinders, Power Units and Generators are just few of the industrial applications for the controller. The Cascade controller is fully compatible with all major engine types. Whether you are running mechanical or J1939 engines, the controller will work with your application. Here are some of the unique features of the Cascade that only Murphy can provide and RCT can offer at a competitive price: • Durability: Encapsulated to protect it against dirt, water and dust, along with a compression gasket to fully seal it to the panel. Cascade is rated NEMA4 and IP65. • Low Battery Blackouts: Operates in total blackout for a minimum of two seconds. • Compatibility: Accepts MPU, AC Frequency and ECU speed signals and can operate with standard and J1939 engines. • Inputs and Outputs: The Cascade Inputs and Outputs are ruggedly protected and fault tolerant. • J1939 Ready: Works directly with Murphy’s J1939-ready PowerView gages, just plug and go, no sender is required. Part No: 7134 Description: AUTO START / STOP PANEL CASCADE MURPHY # CD-101 Specialised Electrical Equipment APT 210 Instrumentation (Murphy) Fluid The L129 Series Lube Level Swichgage® instrument is a combination of lube level indicating gauge and adjustable low and high limit switches. It provides protection against low oil level or high level caused by overfill or fuel or water seepage into the crankcase. A 6-3/4 inch (171 mm) deep sight gauge allows you to check the condition and level of your oil without shutting down the equipment. Fingertip adjustable limit contacts, through 4-7/8 inch (122 mm) range, make it simple to set the high and low limit mark. If the float touches the high or low limit contact, a normally open circuit will be completed which can activate alarms and/or shutdown the equipment. There are two models in the L129 Series: L129 and L129CK1. The L129 model is designed for grounded, low voltage electrical systems. It features a one-wire-to-ground electrical circuit. The L129CK1 was designed for applications requiring a three-wire, above ground electrical circuit. It features ungrounded contacts and a conduit hub to protect electrical wiring. Options are available for both models. A flow restrictor plug is available that restricts oil flow from the crankcase to the L129 Series switch and vice versa. It is typically used on applications where the engine is not stationary such as marine and mobile equipment. The L129 Series Lube Level Swichgage®, when properly installed and maintained, can monitor and protect your engines and pumps from improper lubrication levels, which can result in extensive damage. The L150 Series Level Swichgage® instrument is a combination liquid level gauge and low limit switch; each unit includes a chamber with pivotal float, an indicating dial with pointer, and a low level contact. When properly installed and maintained, the float operates the pointer which, in turn, indicates the level during normal operation, and closes a switching circuit if the level falls to the low-limit set point. Part No: 7845 Part No: 5712 Description: FLUID LEVEL GAUGE MICROSWITCH NORMALLY OPEN / NORMALLY CLOSED MURPHY # 0915EL150K1 Description: FLUID LEVEL SWITCH NORMALLY CLOSED MURPHY # 0915L150 Description: LUBE LEVEL SWITCH HIGH / LOW ADJUST MURPHY # 0915L129 Specialised Electrical Equipment Part No: 2923 211 APT Instrumentation (Murphy) Magnetic Relay Switches and Pickups TATTLETALE® Annunciators and Magnetic Switches are the nerve centres that translate SWICHGAGE® contact operations into decisions and operate the alarm or shutdown device. They are the electrical load carrying devices for the alarm or shutdown device. TATTLETALE® Annunciators indicate which monitored function failed leading to the alarm or shutdown whereas magnetic switches do not. Magnetic switches operate as a latching relay. Part No: 4232 Part No: 2104 Part No: 4721 Description: MAGNETIC RELAY SWITCH 12 VOLT MURPHY # 0925518H12 Description: MAGNETIC RELAY SWITCH 24 VOLT MURPHY # 0925518H24 Description: MAGNETIC PICKUP 5/8UNF 3" MURPHY # 0920MP3298 Instrumentation (Murphy) Pressure Electric The EGS21 Series Swichgage® instrument has all of the features of the EG21 Series Gauge plus an adjustable set point PowerHall® Effect switch output for operating alarms or equipment shutdown. The trip point is adjustable over 90% of the scale and has a set point indicator visible from the gauge face. Now you can have both the ease of electric gauge installation and the reliable switching of Murphy’s famous Swichgage® instruments. Part No: 8774 Description: PRESSURE GAUGE ELECTRIC 100PSI 12 VOLT MURPHY # 09EGS21P100 Specialised Electrical Equipment APT 212 Instrumentation (Murphy) Pressure Environmentally Sealed Mechanical The A20 Series (2 inch/51 mm dial) and the A25 Series (2-1/2 inch/64 mm dial) Swichgage® instruments are diaphragm-actuated, pressure-indicating gauges, with built-in electrical switches for tripping alarms and/or shutdown devices. All models of these rugged, built-to-last instruments are face sealed from the environment by the unique combination of a polycarbonate case and lens, a polished stainless steel bezel and O-ring seals. Accuracy and protection from moderate overpressure is assured by a unique, unitised diaphragm chamber. A built-in pulsation dampener helps eliminate pointer flutter and is removable for cleaning. For series A20P and A25P, the gauge pointer acts as a pressure indicator and as one switch pole which completes a circuit when it touches the adjustable limit contact. Contacts have self-cleaning motion to ensure electrical continuity. Part No: 3172 Part No: 4228 Description: PRESSURE GAUGE ENVIROMENTALLY SEALED 100PSI MURPHY # 0905A20S100 Description: PRESSURE GAUGE ENVIROMENTALLY SEALED 400PSI MURPHY # 0905A20S400 Instrumentation (Murphy) Pressure Line Kits The Deluxe (DHK) oil pressure tubing kit can be used with a variety of Murphy SWICHGAGE® and MURPHYGAGE® instruments. This kit consists of gauge fittings, pressure tubing, and engine fittings. The Deluxe kit is ideal for heavy-duty industrial applications. The nylon core is reinforced with a synthetic fibre braid and polyurethane cover. Both ends of the pressure tubing have swaged fittings. The Deluxe kit allows you to choose the type of gauge and engine fittings for your application. Choose straight or elbow fittings for both gauge and engine connections. In addition, the kit offers a variety of engine adapters to fit your application. These adapters are available in U.S. or metric threads. Part No: 1699 Specialised Electrical Equipment Description: PRESSURE KIT 1/8NPT 5M 3/16" LINE 213 APT Instrumentation (Murphy) Pressure Mechanical The 20 Series (2 inch/51 mm dial) and the 25 Series (2-1/2 inch/64 mm dial) Swichgage® models are diaphragmactuated, pressure-indicating gauges, with built-in electrical switches. These switches are used for tripping alarms and/or shutdown devices. The gauge mechanism is enclosed in a steel case coated to resist corrosion. A polycarbonate, break-resistant lens and a polished, stainless steel bezel help protect this rugged, built-to-last instrument. Accuracy and protection from moderate overpressure is assured by a unique, unitised diaphragm chamber. A built-in pulsation dampener helps eliminate pointer flutter and is removable for cleaning. Part No: 5151 Part No: 8831 Part No: 8377 Description: PRESSURE GAUGE 100PSI MURPHY # 090520PI100 Description: PRESSURE GAUGE 150PSI MURPHY # 090520PI150 Description: PRESSURE GAUGE 300PSI MURPHY # 090520PI300 Part No: 2367 Description: PRESSURE GAUGE 400PSI MURPHY # 090520PI400 Instrumentation (Murphy) Senders Pressure Electric A range of Pressure Sender’s to suit the EGS Electric Murphy gauges. The EGS21 Series Swichgage® instrument has all of the features of the EG21 Series Gauge plus an adjustable set point PowerHall® Effect switch output for operating alarms or equipment shutdown. The trip point is adjustable over 90% of the scale and has a set point indicator visible from the gauge face. Now you can have both the ease of electric gauge installation and the reliable switching of Murphy’s famous Swichgage® instruments. Part No: 3919 Specialised Electrical Equipment Description: SENDER TO SUIT PRESSURE ELECTRIC GAUGE 100PSI 1/8NPT MURPHY # 09ESP100 APT 214 Instrumentation (Murphy) Senders Temperature Electric A range of Temperature Sender’s to suit the EGS Electric Murphy gauges. The EGS21 Series Swichgage® instrument has all of the features of the EG21 Series Gauge plus an adjustable set point PowerHall® Effect switch output for operating alarms or equipment shutdown. The trip point is adjustable over 90% of the scale and has a set point indicator visible from the gauge face. Now you can have both the ease of electric gauge installation and the reliable switching of Murphy’s famous Swichgage® instruments. Part No: 3082 Part No: 3366 Part No: 0913 Description: SENDER TO SUIT ELECTRIC TEMPERATURE GAUGE 120 / 150°C 1/2NPT MURPHY # 09EST25008 Description: SENDER TO SUIT ELECTRIC TEMPERATURE GAUGE 120 / 150°C 1/8NPT MURPHY # 09EST25002 Description: SENDER TO SUIT ELECTRIC TEMPERATURE GAUGE 120 / 150°C 5/8UNF MURPHY # 09EST25010 Instrumentation (Murphy) Solenoids Murphy push/pull DC Solenoids provide single unit versatility for engine applications such as shutdown. Part No: 1735 Part No: 8310 Part No: 7574 Description: SHUTDOWN SOLENOID 24V 38MM STROKE 14lb PULL MURPHY # 0940RP2310 Description: FUEL SOLENOID VALVE 12V MURPHY # 0955SV123 Description: FUEL SOLENOID VALVE 24V MURPHY # 0955SV243 Specialised Electrical Equipment A choice of two models and two voltages is available. All models come complete with return spring and rubber seal boot. . 215 APT Instrumentation (Murphy) Temperature Electric The EGS21 Series Swichgage® instrument has all of the features of the EG21 Series Gauge plus an adjustable set point PowerHall® Effect switch output for operating alarms or equipment shutdown. The trip point is adjustable over 90% of the scale and has a set point indicator visible from the gauge face. Now you can have both the ease of electric gauge installation and the reliable switching of Murphy’s famous Swichgage® instruments. Part No: 2007 Part No: 4593 Description: TEMPERATURE GAUGE ELECTRIC 120°C 12 VOLT MURPHY # 09EGS21P120 Description: TEMPERATURE GAUGE ELECTRIC 150°C 12 VOLT MURPHY # 09EGS21P150 Specialised Electrical Equipment APT 216 Instrumentation (Murphy) Temperature Environmentally Sealed Mechanical The A20 Series (2 inch/51 mm dial) and the A25 Series (2-1/2 inch/64 mm dial) Switchgauge® models are diaphragmactuated, temperature-indicating gauges, with built-in electrical switches for tripping alarms and/or shutdown devices. All models of these rugged, built-to-last instruments are fully sealed from the environment by the unique combination of a polycarbonate case and lens, a polished stainless steel bezel and O-ring seals. These vapour/pressure actuated gauges feature a sealed capillary tube and a sensing bulb. When subjected to heat, the liquid in the sensing bulb changes to vapour creating pressure against a diaphragm mechanism. The diaphragm translates this vapour pressure into a mechanical gauge reading. For series A20T and A25T, the gauge pointer acts as a temperature indicator and as one switch pole which completes a circuit when it touches the adjustable limit contact. Contact(s) are isolated from ground. They have a self-cleaning motion to enhance electrical continuity. Part No: 8007 Part No: 5733 Part No: 6407 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 150°C 20 FOOT CAPILLARY MURPHY # 0910A20S1520 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 120°C 6 FOOT CAPILLARY MURPHY #0910A20S1206 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 120°C 10 FOOT CAPILLARY MURPHY #0910A20S1210 Part No: 4936 Part No: 1497 Part No: 1037 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 120°C 12 FOOT CAPILLARY MURPHY #0910A20S1212 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 120°C 16 FOOT CAPILLARY MURPHY #0910A20S1216 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 120°C 20 FOOT CAPILLARY MURPHY #0910A20S1220 Part No: 2375 Part No: 4162 Part No: 4093 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 120°C 25 FOOT CAPILLARY MURPHY #0910A20S1225 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 150°C 10 FOOT CAPILLARY MURPHY # 0910A20S1510 Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 150°C 25 FOOT CAPILLARY MURPHY # 0910A20S1525 Part No: 2460 Specialised Electrical Equipment Description: TEMPERATURE GAUGE ENVIROMENTALLY SEALED 150°C 35 FOOT CAPILLARY MURPHY # 0910A20S1535 217 APT Instrumentation (Murphy) Temperature Standard Mechanical The A20 Series (2 inch/51 mm dial) and the A25 Series (2-1/2 inch/64 mm dial) Swichgage® models are diaphragmactuated, temperature-indicating gauges, with built-in electrical switches for tripping alarms and/or shutdown devices. All models of these rugged, built-to-last instruments are fully sealed from the environment by the unique combination of a polycarbonate case and lens, a polished stainless steel bezel and O-ring seals. These vapour/pressure actuated gauges feature a sealed capillary tube and a sensing bulb. When subjected to heat, the liquid in the sensing bulb changes to vapour creating pressure against a diaphragm mechanism. The diaphragm translates this vapour pressure into a mechanical gauge reading. For series A20T and A25T, the gauge pointer acts as a temperature indicator and as one pole switch which completes a circuit when it touches the adjustable limit contact. Contact(s) are isolated from ground. They have a self-cleaning motion to enhance electrical continuity. Part No: 3946 Part No: 3945 Part No: 8490 Description: TEMPERATURE GAUGE 320°F / 160°C 16 FOOT CAPILLARY M10 x 1.5MM MURPHY # 091020H1616 Description: TEMPERATURE GAUGE 320°F / 160°C 6 FOOT CAPILLARY M10 x 1.5MM MURPHY # 091020H1606 Description: TEMPERATURE GAUGE 120°C 4 FOOT CAPILLARY MURPHY # 091020TI1204 Part No: 8980 Part No: 8528 Part No: 8640 Description: TEMPERATURE GAUGE 120°C 6 FOOT CAPILLARY MURPHY # 091020TI1206 Description: TEMPERATURE GAUGE 120°C 8 FOOT CAPILLARY MURPHY # 091020TI1208 Description: TEMPERATURE GAUGE 120°C 10 FOOT CAPILLARY MURPHY # 0910207I1210 Part No: 9632 Part No: 2019 Part No: 2345 Description: TEMPERATURE GAUGE 120°C 12 FOOT CAPILLARY MURPHY # 091020TI1212 Description: TEMPERATURE GAUGE 120°C 16 FOOT CAPILLARY MURPHY # 091020TI1216 Description: TEMPERATURE GAUGE 120°C 20 FOOT CAPILLARY MURPHY # 091020TI1220 Part No: 3512 Part No: 1985 Part No: 6440 Description: TEMPERATURE GAUGE 120°C 25 FOOT CAPILLARY MURPHY # 091020TI1225 Description: TEMPERATURE GAUGE 150°C 6 FOOT CAPILLARY MURPHY # 091020TI1506 Description: TEMPERATURE GAUGE 150°C 10 FOOT CAPILLARY MURPHY # 091020TI1510 Part No: 7179 Part No: 2678 Part No: 2561 Description: TEMPERATURE GAUGE 150°C 20 FOOT CAPILLARY MURPHY # 091020TI1520 Description: TEMPERATURE GAUGE 150°C 25 FOOT CAPILLARY MURPHY # 091020TI1525 Description: TEMPERATURE GAUGE 440°F / 226°F 10 FOOT CAPILLARY MURPHY # 091020TI2310 Specialised Electrical Equipment APT 218 Instrumentation (Murphy) Timers Murphy Timer Switches can automatically start or stop engines or electrical motors after a pre-determined time. These time switches can be wired for an open or closed circuit when time expires. The mechanical switch requires no electrical current to operate and has an SPDT contact arrangement. These switches feature a precision movement that gives years of reliable service. Part No: 5659 Part No: 3143 Description: TIMER ELECTRONIC PROGRAMMABLE 24 HOUR MURPHY # 09804002622 Description: TIMER MECHANICAL 24 HOUR MURPHY # MUR24T Specialised Electrical Equipment The electronic timer is fully programmable with 24 hours, 7 day capability. 219 APT Instrumentation (Murphy) Volt These rugged gauges are environmentally sealed and exceed the rigid SAE J1810 standard for reliable operation under tough off-road and power unit environments. Corrosion-resistant materials are used throughout, making the EG21 highly desirable for marine and other environmentally sensitive applications. Soft, non-glare dial and pointer illumination is provided by a “cold light” LED and when powered the white lettering and clear pointer become soft red. Mirror band eliminates parallax reading error when the pointer and its reflection are aligned. Part No: 9267 Part No: 6844 Part No: 6430 Description: AMMETER GAUGE 60 - 0 - 60 AMPS MURPHY # 096560060 Description: VOLTMETER GAUGE 12V MURPHY # 0965VM12 Description: VOLTMETER GAUGE 24V MURPHY # 37IVP0103 Instrumentation (Murphy) Voltage Reducing Loom A range of Voltage Reducing looms to suit the EGS Electric Murphy gauges. These enable the use of electric gauges on 12 volts DC. The EGS21 Series Swichgage® instrument has all of the features of the EG21 Series Gauge plus an adjustable set point PowerHall® Effect switch output for operating alarms or equipment shutdown. The trip point is adjustable over 90% of the scale and has a set point indicator visible from the gauge face. Now you can have both the ease of electric gauge installation and the reliable switching of Murphy’s famous Swichgage® instruments. Specialised Electrical Equipment Part No: 2012 Description: REDUCING LOOM 24 TO 12 VOLT TO SUIT ELECTRIC GAUGES MURPHY # 09EG05006168 APT 220 Instrumentation (VDO) Adaptors and T-Pieces VDO adaptors are designed for heavy duty applications such as connecting oil pressure, engine temperature and high temperature hose fittings. These adaptors are available in different thread sizes and t-piece adaptors. Part No: 6972 Part No: 6973 Part No: 4345 Description: THREADED ADAPTOR 1/2 x 1/8 NPT - VDO # 320.053 Description: THREADED ADAPTOR 16 x 1.5 x 1/8NPT - VDO # 320.055 Description: THREADED ADAPTOR M14 x 1/8 NPT - VDO # 320.054 Part No: 2235 Part No: 5603 Part No: 2279 Description: T-PIECE ADAPTOR 1/4 NPTM - 1/4 NPTF - 1/8 NPTF VDO # 230.032 Description: T-PIECE ADAPTOR 1/8 NPE MALE - FEMALE - FEMALE VDO # 230.031 Description: T-PIECE ADAPTOR M12 x M12 X 1/8 NPT - VDO # 230.034 Part No: 1050 Specialised Electrical Equipment Description: T-PIECE ADAPTOR M14 x 1.5mm MALE - FEMLAE FEMALE - VDO # 320.035 221 APT Instrumentation (VDO) Gauges and Senders RCT offers a range of Datcon instruments to suit automotive through to industrial machines. Datcon products are preferred by leading Original Equipment Manufacturers (OEMs). Datcon gauges are high impact, moisture resistant, dual scale and are ideally suited to off highway applications. Part No: 8837 Part No: 2704 Part No: 4298 Description: FUEL SENDER 10 - 180 OHM - VDO # 220.003 Description: HOURMETER GAUGE 12 / 24V 52mm - VDO # 331.303 / 331032004 Description: LOW WATER PROBE 30mm - VDO # 230.058 Part No: 7242 Part No: 7073 Part No: 7513 Description: OIL PRESSURE GAUGE 24V 500KPA - VDO # 350.308 / 350040016 Description: OIL TEMPERATURE GAUGE 24V 50 - 150°C - VDO # 310.323 / 310040003 Description: OIL TEMPERATURE GAUGE 24V 60 - 300°C - VDO # 310.325 / 31004004 Part No: 3705 Part No: 7071 Part No: 7219 Description: TACHOMETER GAUGE 0 - 4000RPM ALTERNATOR DRIVEN VDO # 333.310 / 333035011 Description: TEMPERATURE GAUGE 24V 40 - 120°C - VDO # 310.303 / 31004002 Description: VOLTMETER GAUGE 10 - 16V 52mm - VDO # 332.302 / 332010004 Part No: 7220 Part No: 0280 Part No: 7241 Description: VOLTMETER GAUGE 20 - 32V 52mm - VDO # 332.303 / 33204001 Description: WATER TEMPERATURE GAUGE 12V 40 - 120°C - VDO # 310.302 / 310010014 Description: OIL PRESSURE GAUGE 12V 1000KPA - VDO # 350.305 / 350010017 Part No: 1721 Part No: 0278 Part No: 7251 Description: PRESSURE SENDER 0 - 362 PSI 1/8 NPTF - VDO # 360.722 / 360081038003C Description: PRESSURE SENDER 0 - 500 PSI 1/8 NPTF - VDO # 360.001 Description: PRESSURE SENDER 1000 KPA 1/8 NPTF - VDO # 360.002 Part No: 5948 Part No: 7094 Part No: 1258 Description: TEMPERATURE SENDER 40 - 120°C 1/8 NPTF - VDO # 320.002 Description: TEMPERATURE SENDER 50 - 150°C 1/8 NPTF - VDO # 320.021 Description: TEMPERATURE SENDER 60 - 200°C 1/8 NPTF LONG STYLE VDO # 320.006 Specialised Electrical Equipment Part No: 1722 Description: TEMPERATURE SENDER 60 - 200°C 1/8 NPTF SHORT STYLE VDO # 320.020 APT 222 LED Lamps - Powerlight Tail / Nylon LED Series NYLON SERIES LED LIGHTS These lights have been designed to be direct replacements for popular original equipment lamps and grommet style stop/tail and clearance/directional indicator lights. Constructed from resilient, all weather nylon, these lights will not corrode like cast aluminium lights, nor will they deteriorate like grommet style lights. Lighting is supplied via 48 high intensity LED’s (most models) providing a constant output with an extraordinary life span. LED TAIL LIGHTS Part No: 4076 Part No: 4245 Part No: 8216 Description: SHALLOW NYLON VL LAMP CLEARANCE / FLASHING AMBER, CABLE ENTRY: SIDE Description: SHALLOW NYLON VL LAMP CLEARANCE / FLASHING AMBER, CABLE ENTRY: SIDE Description: SHALLOW NYLON VL LAMP PAYLOAD GREEN, CABLE ENTRY: SIDE Part No: 4336 Part No: 4074 Part No: 5655 Description: SHALLOW NYLON VL LAMP NEGATIVE SWITCHING RED, CABLE ENTRY: SIDE Description: SHALLOW NYLON VL LAMP STOP / TAIL RED, CABLE ENTRY: SIDE Description: SHALLOW NYLON VL LAMP CLEARANCE / FLASHING RED, CABLE ENTRY: SIDE Part No: 4364 Part No: 4075 Part No: 4073 Description: SHALLOW NYLON VL LAMP STOP / TAIL NEGATIVE SWITCHING RED, CABLE ENTRY: SIDE Description: DEEP NYLON VL LAMP FLASHING / CLEARANCE AMBER, CABLE ENTRY: SIDE Description: DEEP NYLON VL LAMP STOP / TAIL RED, CABLE ENTRY: SIDE 223 Specialised Electrical Equipment The LED tail lights are specifically designed for mining applications. With a greater service life than conventional Original Equipment Manufactured lamps, they provide excellent cost benefits in an environment where corrosion, water, vibration, shock and weather extremes are all common causes of lamp failure. APT Specialised Electrical Equipment Part No: 4740 Part No: 1972 Part No: 2132 Description: STUD MOUNT DOUBLE SIDED LAMP FLASHING / CLEARANCE DUAL AMBER, CABLE ENTRY: BOTTOM Description: STUD MOUNT DOUBLE SIDED LAMP FLASHING / CLEARANCE DUAL RED, CABLE ENTRY: BOTTOM Description: STUD MOUNT DOUBLE SIDED LAMP FLASHING / CLEARANCE DUAL AMBER, CABLE ENTRY: BOTTOM Part No: 5971 Part No: 5175 Part No: 0146 Description: STUD MOUNT SINGLE SIDED LAMP FLASHING / CLEARANCE AMBER, CABLE ENTRY: BOTTOM Description: STUD MOUNT SINGLE SIDED LAMP FLASHING / CLEARANCE BLUE, CABLE ENTRY: REAR Description: STUD MOUNT SINGLE SIDED LAMP FLASHING / WARNING INSULATED BLUE, CABLE ENTRY: REAR Part No: 3808 Part No: 8554 Part No: 0176 Description: STUD MOUNT SINGLE SIDED LAMP STOP / TAIL RED, CABLE ENTRY: BOTTOM Description: STUD MOUNT SINGLE SIDED LAMP STOP / TAIL RED, CABLE ENTRY: REAR Description: STUD MOUNT SINGLE SIDED LAMP STOP / TAIL INSULATED RED, CABLE ENTRY: REAR Part No: 3943 Part No: 5656 Part No: 0655 Description: RECTANGULAR SINGLE SIDED LAMP STOP / TAIL RED, CABLE ENTRY: REAR Description: BRACKET TO SUIT VL NYLON BODY LAMPS Description: BEACON HOUSING TO SUIT VL NYLON SHALLOW LAMPS APT 224 LED Pilot Lights Powerlight Constant Illumination (No Load) and Intermittent Illumination (Loaded) The PowerLight™ Multi Voltage LED Pilot Lights have been designed to consolidate all No Load LEDs under four easy to use part numbers. With an operating range of 6 – 32 volts DC, these units have been specifically designed to operate in the harshest conditions. They are compact in design and are highly resistant to vibration, dust and moisture. Their reliability helps to eliminate costly downtime caused by the regular replacement of standard incandescent globes, often used as indicators. LED pilot lights are far more tolerant to changes in voltage and voltage spikes. Please note: If a loaded LED Pilot Light is required (for alternator excitation) a resistor assembly needs to be applied across the power and ground. Part No: 11110 Part No: 11111 Description: LED PILOT LIGHT 6 - 32V 2 TERMINAL RED Description: LED PILOT LIGHT 6 - 32V 2 TERMINAL GREEN Description: LED PILOT LIGHT 6 - 32V 2 TERMINAL YELLOW Part No: 11112 Part No: 8751 Part No: 2504 Description: LED PILOT LIGHT 6 - 32V 2 TERMINAL BLUE Description: 12V RESISTOR EXCITATION ASSEMBLY Description: 24V RESISTOR EXCITATION ASSEMBLY Part No: 7346 Part No: 8553 Description: LED PILOT LIGHT 60V NO LOAD RED Description: LED PILOT LIGHT 24V IN LINE POWER RED Specialised Electrical Equipment Part No: 11109 225 APT LED Pilot Lights Powerlight Flashing The PowerLight™ LED Pilot Lights have been specifically designed to operate in the harshest conditions. They are compact in design and are highly resistant to vibration, dust and moisture. Many models incorporate special load circuitry to reduce false illumination caused by moisture being present across the switching circuit. This load circuit can also be used for alternator excitation. Their reliability helps to eliminate costly downtime caused by the regular replacement of standard incandescent globes, often used as indicators. LED pilot lights are far more tolerant to changes in voltage and voltage spikes. TYPE OF LED PILOT LIGHTS • RCT’s LED pilot lights are made in various types for different purposes/applications. • Colours: RCT manufactures LED pilot lights in red, green, yellow, blue, orange and tri-colour (green/red/yellow). • Voltage: Most types of RCT’s LED pilot lights are available in either 12VDC, 24VDC, 60VDC or multi voltage. • Flashing style illumination: If the application requires the pilot light to automatically flash, use the “Flashing” type LED pilot light e.g. “Engine idle timer counting down”. Part No: 9393 Part No: 9403 Part No: 9394 Description: LED PILOT LIGHT MULTI VOLTAGE FLASHING RED Description: LED PILOT LIGHT MULTI VOLTAGE FLASHING GREEN Description: LED PILOT LIGHT MULTI VOLTAGE FLASHING YELLOW Specialised Electrical Equipment APT 226 LED Pilot Lights Powerlight Negative Switching The PowerLight™ LED Pilot Lights have been specifically designed to operate in the harshest conditions. They are compact in design and are highly resistant to vibration, dust and moisture. Many models incorporate special load circuitry to reduce false illumination caused by moisture being present across the switching circuit. This load circuit can also be used for alternator excitation. Their reliability helps to eliminate costly downtime caused by the regular replacement of standard incandescent globes, often used as indicators. LED pilot lights are far more tolerant to changes in voltage and voltage spikes. Part No: 7604 Part No: 6151 Part No: 9563 Description: LED PILOT LIGHT 12V NEGATIVE SWITCHING RED Description: LED PILOT LIGHT 24V NEGATIVE SWITCHING RED Description: LED PILOT LIGHT 24V NEGATIVE SWITCHING GREEN Part No: 2112 Part No: 8958 Part No: 5990 Description: LED PILOT LIGHT 12V NEGATIVE SWITCHING YELLOW Description: LED PILOT LIGHT 24V NEGATIVE SWITCHING YELLOW Description: LED PILOT LIGHT 12V NEGATIVE SWITCHING 5MM TRI COLOUR 227 Specialised Electrical Equipment TYPE OF LED PILOT LIGHT • RCT’s LED pilot lights are made in various types for different purposes/applications. Below is a simple guide to enable you to order the right LED pilot light for your specific application. • Colours: RCT manufactures LED pilot lights in red, green, yellow, blue, orange and tri-colour (green/red/yellow). • Voltage: Most types of RCT’s LED pilot lights are available in either 12VDC, 24VDC, 60VDC or multi voltage. • Failsafe Indication: Applications where a connection needs to be monitored for continuity or electrical connection may use the “Failsafe” type LED pilot lights. These function as per a normal LED pilot light when connected to both positive and negative. However, they have an additional wire (available in either positive sense or negative sense types), this wire when connected to the sense wire will turn the pilot light OFF. If the sense wire, is disconnected from its source for any reason the pilot light will illuminate. APT LED Pilot Lights Powerlight Positive Switching The PowerLight™ LED Pilot Lights have been specifically designed to operate in the harshest conditions. They are compact in design and are highly resistant to vibration, dust and moisture. Many models incorporate special load circuitry to reduce false illumination caused by moisture being present across the switching circuit. This load circuit can also be used for alternator excitation. Their reliability helps to eliminate costly downtime caused by the regular replacement of standard incandescent globes, often used as indicators. LED pilot lights are far more tolerant to changes in voltage and voltage spikes. TYPE OF LED PILOT LIGHT • RCT’s LED pilot lights are made in various types for different purposes/applications. Below is a simple guide to enable you to order the right LED pilot light for your specific application. • Colours: RCT manufactures LED pilot lights in red, green, yellow, blue, orange and tri-colour (green/red/yellow). • Voltage: Most types of RCT’s LED pilot lights are available in either 12VDC, 24VDC, 60VDC or multi voltage. • Failsafe Indication: Applications where a connection needs to be monitored for continuity or electrical connection may use the “Failsafe” type LED pilot lights. These function as per a normal LED pilot light when connected to both positive and negative. However, they have an additional wire (available in either positive sense or negative sense types), this wire when connected to the sense wire will turn the pilot light OFF. If the sense wire is disconnected from its source for any reason the pilot light will illuminate. Specialised Electrical Equipment Part No: 8475 Part No: 5217 Part No: 1441 Description: LED PILOT LIGHT 12V POSITIVE SWITCHING GREEN Description: LED PILOT LIGHT 24V POSITIVE SWITCHING GREEN Description: LED PILOT LIGHT 12V POSITIVE SWITCHING RED Part No: 2548 Part No: 5995 Description: LED PILOT LIGHT 24V POSITIVE SWITCHING RED Description: LED PILOT LIGHT 12V POSITIVE SWITCHING 5MM TRI COLOUR APT 228 LED Pilot Lights Powerlight Tri-colour The PowerLight™ LED Pilot Lights have been specifically designed to operate in the harshest conditions. They are compact in design and are highly resistant to vibration, dust and moisture. Many models incorporate special load circuitry to reduce false illumination caused by moisture being present across the switching circuit. This load circuit can also be used for alternator excitation. Their reliability helps to eliminate costly downtime caused by the regular replacement of standard incandescent globes, often used as indicators. LED pilot lights are far more tolerant to changes in voltage and voltage spikes. Part No: 4875 Part No: 5935 Description: LED PILOT LIGHT 12V TRI COLOUR Description: LED PILOT LIGHT 24V TRI COLOUR Specialised Electrical Equipment TYPE OF LED PILOT LIGHTS • RCT’s LED pilot lights are made in various types for different purposes/applications. Below is a simple guide to enable you to order the right LED pilot light for your specific application. • Colours: RCT manufactures LED pilot lights in red, green, yellow, blue, orange and tri-colour (green/red/yellow). • Voltage: Most types of RCT’s LED pilot lights are available in either 12VDC, 24VDC, 60VDC or multi voltage. • Change of status indication: Where the pilot light is going to indicate a change of state, the tri-colour LED pilot light may be used. This pilot light changes colour when different electrical connections are made e.g. “Status OK” (green) “Status FAIL” (red). 229 APT LED Pilot Lights Powerlight Ultra Bright The PowerLight™ LED Pilot Lights have been specifically designed to operate in the harshest conditions. They are compact in design and are highly resistant to vibration, dust and moisture. Many models incorporate special load circuitry to reduce false illumination caused by moisture being present across the switching circuit. This load circuit can also be used for alternator excitation. Their reliability helps to eliminate costly downtime caused by the regular replacement of standard incandescent globes, often used as indicators. LED pilot lights are far more tolerant to changes in voltage and voltage spikes. TYPE OF LED PILOT LIGHTS • RCT’s LED pilot lights are made in various types for different purposes/applications. Below is a simple guide to enable you to order the right LED pilot light for your specific application. • Colours: RCT manufactures LED pilot lights in red, green, yellow, blue, orange and tri-colour (green/red/yellow). • Voltage: Most types of RCT’s LED pilot lights are available in either 12VDC, 24VDC, 60VDC or multi voltage. • Ultra Bright: Application that requires the pilot light to be seen from some distance should utilise our “Ultra Bright” type LED pilot light e.g. Fire pumps and generator warnings. Note: The ultra bright lights are narrow in viewing angle and are not suitable for continuous illumination. Specialised Electrical Equipment Part No: 8574 Part No: 8579 Part No: 3341 Description: LED PILOT LIGHT 12V ULTRA BRIGHT RED Description: LED PILOT LIGHT 24V ULTRA BRIGHT RED Description: LED PILOT LIGHT 24V ULTRA BRIGHT FLASHING RED Part No: 8573 Part No: 8578 Description: LED PILOT LIGHT 12V ULTRA BRIGHT ORANGE Description: LED PILOT LIGHT 12V ULTRA BRIGHT ORANGE APT 230 Lighting - Beacons Rotating Beacons RCT stocks a wide range of rotating beacons suitable for industrial and mining applications. Part No: 2464 Part No: 7577 Part No: 1432 Description: ROTATING BEACON 130MM AMBER 12V 3 BOLT MOUNT HELLA # 1719 Description: ROTATING BEACON 153MM AMBER 12V 3 BOLT MOUNT Description: BLUE LENS TO SUIT 7577 Part No: 1431 Part No: 7578 Part No: 6982 Description: RED LENS TO SUIT 7577 Description: ROTATING BEACON 153MM AMBER 24V 3 BOLT MOUNT Description: ROTATING BEACON 155MM AMBER MULTI VOLTAGE (NO GLOBE SUPPLIED) MAGNETIC BASE Part No: 3539 Part No: 2465 Part No: 7550 Description: ROTATING BEACON 200MM AMBER 12V MAGNETIC BASE Description: ROTATING BEACON AMBER 24V 70W HELLA # 1722 Description: ROTATING BEACON RED 24V 70W HELLA # 1721 Specialised Electrical Equipment Available in 12 or 24v, most models offer an easy three bolt mounting solution. Magnetic base versions are available upon request. Part No: 10229 Description: UNIVERSAL BEACON MOUNT 231 APT Lighting - Beacons Strobe Lights RCT stocks a wide range of strobe lights suitable for industrial and mining applications. Available in 12 or 24v most models offer an easy three bolt mounting solution. Specialised Electrical Equipment Part No: 3724 Part No: 3726 Part No: 3725 Description: STROBE LIGHT 130MM AMBER 12 - 72V 3 BOLT MOUNT HELLA # 1657 Description: STROBE LIGHT 130MM GREEN 12 - 72V 3 BOLT MOUNT HELLA # 1663 Description: STROBE LIGHT 130MM RED 12 - 72V 3 BOLT MOUNT HELLA # 1656 Part No: 0121 Part No: 4040 Part No: 0316 Description: STROBE LIGHT 4" AMBER 12 - 48V PRECO # 3318A Description: STROBE LIGHT 4" BLUE 12 - 48V PRECO # 3318B Description: STROBE LIGHT 4" RED 12 - 48 VOLT PRECO # 3318R Part No: 2652 Part No: 2649 Part No: 10229 Description: STROBE LIGHT MINI 69MM BLUE 12V SINGLE STUD MOUNT Description: STROBE LIGHT MINI 69MM RED 12V SINGLE STUD MOUNT Description: UNIVERSAL BEACON MOUNT APT 232 Lighting - General Globes RCT stock a large range of high quality replacement globes for a range of industrial and mining applications. Please feel free to contact us for further information on the RCT range of globes. Part No: 9493 Part No: 3886 Description: BA15D 12V 5 WATT GLOBE Description: BA15D 24V 21 / 5 WATT GLOBE Description: BA15D 24V 5 WATT GLOBE Part No: 9506 Part No: 3885 Part No: 9492 Description: BA15S 12V 21 WATT GLOBE Description: BA15S 12V 5 WATT GLOBE Description: BA15S 24V 24 WATT GLOBE Part No: 3887 Part No: 3892 Part No: 3891 Description: BA15S 24V 5 WATT GLOBE Description: BA7S 12V 2 WATT GLOBE Description: BA7S 24V 3 WATT GLOBE Part No: 5857 Part No: 3889 Part No: 0363 Description: BA96 12V 6 WATT GLOBE Description: BA9S 12V 2 WATT GLOBE Description: BA9S 24V 2.5 WATT GLOBE TO SUIT TEST LIGHT Part No: 3888 Part No: 0740 Part No: 9496 Description: BA9S 24V 2 WATT GLOBE Description: BA9S 24V 2 WATT GLOBE HELLA # H242 Description: BA9S 24V 5 WATT GLOBE Part No: 3511 Part No: 9507 Part No: 7576 Description: BAX8.5D 24V 1.2 WATT GLOBE (GREY) Description: BAY15D 12V 21 / 5 WATT GLOBE Description: FESTOON 12V 10 WATT GLOBE Part No: 7593 Part No: 7546 Part No: 7595 Description: FESTOON 12V 18 WATT GLOBE Description: FESTOON 12V 5 WATT GLOBE Description: FESTOON 24V 18 WATT GLOBE Part No: 0749 Part No: 0742 Part No: 9518 Description: FESTOON 24V 3 WATT GLOBE HELLA # M243 Description: FESTOON 24V 5 WATT GLOBE HELLA # L245 Description: H1 HALOGEN 12V 100 WATT GLOBE Part No: 9516 Part No: 9490 Part No: 9519 Description: H1 HALOGEN 12V 55 WATT GLOBE Description: H1 HALOGEN 24V 70 WATT GLOBE Description: H3 HALOGEN 12V 100 WATT GLOBE Specialised Electrical Equipment Part No: 3884 233 APT Part No: 3696 Part No: 1088 Part No: 9510 Description: H3 HALOGEN 12V 55 WATT GLOBE Description: H3 HALOGEN 24V 70 WATT GLOBE Description: H4 12V 80 / 100 WATT GLOBE Part No: 9511 Part No: 9517 Part No: 9491 Description: H4 HALOGEN 12V 55 / 100 WATT GLOBE Description: H4 HALOGEN 12V 55 / 60 WATT GLOBE Description: H4 HALOGEN 24V 70 / 75 WATT GLOBE Part No: 5352 Part No: 7861 Part No: 5903 Description: HID GLOBE 35W TO SUIT NORDIC N200 (35W D2S) Description: HID GLOBE 35W TO SUIT NORDIC N400 (35W D1S) Description: HID GLOBE TO SUIT WL100 / 145 HID SERIES Part No: 9509 Part No: 5307 Part No: 9494 Description: WEDGE MINI T73 12V 1.2 WATT Description: WEDGE W2.1x9.5D 12V 5 WATT GLOBE Description: WEDGE W2X4.6D 24V 1.2 WATT Lighting - General Hella As a distributor for Hella, RCT stocks a large range of products to suit the mining and industrial sectors. Please find a listing below of a few common Hella items. For further information, please contact your nearest RCT branch. Specialised Electrical Equipment Part No: 0292 Part No: 1777 Part No: 0180 Description: AMBER FLASHER DIRECTION INDICATOR DUAL SIDED - HELLA # 2127 Description: AMBER FRONT DIRECTION INDICATOR SINGLE SIDED - HELLA # 2128 Description: LENS BLUE TO SUIT 0292 - HELLA # 2.9800.091 Part No: 0290 Part No: 8080 Part No: 1647 Description: LENS RED TO SUIT 0292 - HELLA # 2.9800.01 Description: COMBINATION LAMP INBUILT RED / AMBER / CLEAR 12V - HELLA # 2401 Description: COMBINATION LAMP INBUILT RED / AMBER 12V - HELLA # 2400 Part No: 8076 Part No: 8077 Part No: 8078 Description: COMBINATION LAMP RED / AMBER 12V - HELLA # 2396 Description: COMBINATION LAMP RED / AMBER 12V - HELLA # 2397 Description: COMBINATION LAMP RED / AMBER 12V - HELLA # 2398 Part No: 9592 Part No: 3423 Part No: 0706 Description: DRIVING LAMP PENCIL BEAM 12V RALLYE 4000 - HELLA # 1365 Description: FLURORESCENT LAMP TWIN 12V - HELLA # 7033 Description: GAS DISCHARGE LAMP LONG RANGE 24V - HELLA # 1538-24V APT 234 Part No: 7983 Part No: 3822 Description: LED COMBINATIOM LAMP 8 - 28V - HELLA # 2379 Description: LED COURTESY LAMP AMBER 24V - HELLA # 95951053 Description: LED COURTESY LAMP GREEN ROUND 24V - HELLA # 98050301 Part No: 9384 Part No: 6749 Part No: 8419 Description: LED COURTESY LAMP RED 24V - HELLA # 95951073 Description: LED COURTESY LAMP RED ROUND 12V - HELLA # 98050301 Description: LED LAMP BLUE 8 - 33V HEAVY DUTY - HELLA # HM95903760 Part No: 8418 Part No: 2448 Part No: 8096 Description: LED LAMP GREEN 8 - 33V HEAVY DUTY - HELLA # HM95903780 Description: LED STRIP LAMP RD 24V - HELLA # 95907375 Description: LICENCE PLATE LAMP BLACK - HELLA # 2555 Part No: 8097 Part No: 0296 Part No: 0293 Description: LICENCE PLATE LAMP CHROME - HELLA # 2557 Description: REAR DIRECTIONAL INDICATOR AMBER 12V - HELLA # 2143 Description: REVERSING LAMP CLEAR 12V - HELLA # 2043 Part No: 8821 Part No: 8828 Part No: 8781 Description: SIDE MARKER LAMP RED/AMBER PEDESTAL MOUNT 12V - HELLA # 2009 Description: SIDE MARKER LAMP RED/AMBER SURFACE MOUNT 12V - HELLA # 2029 Description: SIDE MARKER LAMP RED/AMBER SURFACE MOUNT 12V - HELLA # 2042 Part No: 8780 Part No: 0297 Part No: 9339 Description: SIDE MARKER LAMP RED/AMBER SURFACE MOUNT WITH GUARD 12V - HELLA # 2037 Description: STOP / REAR POSITION LAMP RED 12V - HELLA # 2319 Description: WORK LAMP HALOGEN FLOOD BEAM HELLA # 1511 Part No: 2457 Part No: 10805 Description: WORK LAMP HALOGEN SEARCH LAMP HELLA # 1512 Description: MAP LAMP 12V FLEXIBLE MOUNT HELLA # 10805 Specialised Electrical Equipment Part No: 2371 235 APT Lighting - General Interior Lighting RCT offers a range of LED Interior Lighting to suit panel and cabin applications. Using 3rd generation LED technology these 12 / 24v lights are easy to install, fit neatly into corners and offer a 180 degree light output. These units are made with powder coated aluminium brackets and a polycarbonate lens and are available in 10 and 21 inch versions. Part No: 10500 Part No: 10501 Description: INTERIOR LIGHT LED 10" 12 / 24V Description: INTERIOR LIGHT LED 21" 12 / 24V Lighting - Halogen Nordic Halogen The Nordic range of lamps are available in flood and high beam. The lights feature long life H3 halogen globes, hardened glass and one bolt mounting. While the product is exceptionally robust, its light output is superior to most others on the market and as such is used by many Original Equipment Manufacturers (OEMs) including Caterpillar. The lamp is above earth, with connection via a 2 Pin Deutsch plug. Specialised Electrical Equipment Part No: 2615 Part No: 0089 Part No: 6219 Description: HALOGEN FLOOD LAMP 12V 140 x 140MM Description: HALOGEN FLOOD LAMP 24V 140 x 140MM Description: LENS TO SUIT 0089 AND 2615 Part No: 5196 Part No: 4985 Part No: 6220 Description: HALOGEN HIGH BEAM LAMP 12V 140 x 140MM Description: HALOGEN HIGH BEAM LAMP 24V 140 x 140MM Description: LENS TO SUIT 4985 & 5196 Part No: 8499 Description: HALOGEN FLOOD LAMP 24V 100 x 100MM APT 236 Lighting - HID Nordic HID N200 Series The Nordic N200 HID work lamp is designed to withstand the rugged environments of the mining, drilling and earthmoving industries. The ballast is housed inside the die-cast aluminium body and hermetically sealed to ensure long life and ease of installation. Part No: 7789 Part No: 4834 Description: HID FLOOD LAMP AMBER N200 SERIES 24V 35 WATT Description: HID FLOOD LAMP N200 SERIES 12V 35 WATT Description: HID FLOOD LAMP N200 SERIES 24V 35 WATT Part No: 7795 Part No: 7796 Part No: 7793 Description: HID HIGH BEAM LAMP N200 SERIES 12V 35 WATT Description: HID HIGH BEAM LAMP N200 SERIES 24V 35 WATT Description: HID LOW BEAM LAMP N200 SERIES 12V 35 WATT Part No: 7794 Part No: 7791 Part No: 7792 Description: HID LOW BEAM LAMP N200 SERIES 24V 35 WATT Description: HID WIDE FLOOD LAMP N200 SERIES 12V 35 WATT Description: HID WIDE FLOOD LAMP N200 SERIES 24V 35 WATT Part No: 7924 Part No: 4836 Part No: 4833 Description: LENS TO SUIT 7789 AND 4834 Description: BEZEL TO SUIT N200 SERIES LAMPS Description: SCREW SET TO SUIT BEZEL N200 / N400 SERIES LAMPS Part No: 4839 Part No: 4835 Description: STAINLESS STEEL MOUNTING KIT TO SUIT N200 SERIES LAMPS Description: STANDARD MOUNTING KIT TO SUIT N200 SERIES LAMPS Specialised Electrical Equipment Part No: 7790 237 APT Lighting - HID Nordic HID N400 Series The Nordic N400 HID work lamp is designed to withstand the rugged environments of the mining, drilling and earthmoving industries. The ballast is housed inside the die-cast aluminium body and hermetically sealed to ensure long life and ease of installation. Part No: 7155 Part No: 5458 Part No: 7803 Description: HID FLOOD LAMP N400 SERIES 12V 35 WATT Description: HID FLOOD LAMP N400 SERIES 24V 35 WATT Description: HID HIGH BEAM LAMP N400 SERIES 12V 35 WATT Part No: 7804 Part No: 7801 Part No: 7802 Description: HID HIGH BEAM LAMP N400 SERIES 24V 35 WATT Description: HID LOW BEAM LAMP N400 SERIES 12V 35 WATT Description: HID LOW BEAM LAMP N400 SERIES 24V 35 WATT Part No: 7798 Part No: 7800 Part No: 7797 Description: HID WIDE FLOOD LAMP N400 SERIES 12V 35 WATT Description: HID WIDE FLOOD LAMP N400 SERIES 24V 35 WATT Description: HID FLOOD LAMP AMBER N400 SERIES 24V 35 WATT Part No: 7925 Description: LENS TO SUIT 7155 AND 5458 Specialised Electrical Equipment APT 238 Lighting - HID Nordic HID N45 Booster Series The new Nordic N45 HID Booster utilises the latest design 45 watt ballast boosting light output over standard N45 models. The Nordic N45 Booster also includes an all new, extreme duty, anti-vibration mounting system, which when coupled with the already robust, ultra compact body, makes for a hard wearing and versatile work lamp. Part No: 10597 Part No: 10598 Part No: 10599 Description: HID FLOOD LAMP N45 SERIES 24V 45 WATT Description: HID WIDE FLOOD LAMP N45 SERIES 24V 45 WATT Description: HID HIGH BEAM LAMP N45 SERIES 24V 45 WATT Part No: 10600 Specialised Electrical Equipment Description: HID LOW BEAM LAMP N45 SERIES 24V 45 WATT 239 APT Lighting - HID Zenon HID The Zenon HID work lamps have been designed to withstand the rugged environments of the mining, drilling and earthmoving industries. The ballast is housed inside the alloy housing and hermetically sealed to ensure long life and ease of installation. Part No: 5897 Part No: 5911 Part No: 5896 Description: HID FLOOD LAMP WL100 SERIES MULTI VOLTAGE 100 x 100 x 156MM Description: HID SPOT LAMP WL100 SERIES MULTI VOLTAGE 100 x 100 x 156MM Description: HID FLOOD LAMP WL145 SERIES MULTI VOLTAGE 145 x 145 x 166MM Part No: 5909 Description: HID SPOT LAMP WL145 SERIES MULTI VOLTAGE 145 x 145 x 166MM Specialised Electrical Equipment APT 240 Lighting - LED Compact LED Work Lamp Representing the latest in high output lighting technology, the AusProTec™ Compact LED Work Lamp is robust, powerful and resistant to shock, vibration, dust and moisture. With solid-state LED construction and a fully sealed housing (rated to IP67), this LED work light takes durability and reliability to the next level. This work light features a rugged and lightweight die-cast alloy housing, stainless steel mounting hardware, and virtually unbreakable polycarbonate optical lenses. Containing 4 x 2.5 watt LEDs, this multi voltage unit has a 550 lumen output making it a perfect solution for your compact lighting application. Part No: 11514 Description: LED WORK LAMP 9 - 52V 10 WATT 4 x 2.5 WATT LED Lighting - LED High Output LED Work Lamps Representing the latest in high output lighting technology, the AusProTec™ range of LED work lights are robust, powerful and resistant to shock, vibration, dust and moisture. With solid-state LED construction and a fully sealed IP67 housing, these LED work lights take durability and reliability to the next level. Part No: 11575 Part No: 11576 Description: 30 WATT SQUARE LED WORK LAMP Description: 48 WATT SQUARE LED WORK LAMP Specialised Electrical Equipment All AusProTec™ LED work lights feature rugged and lightweight die-cast alloy housings, stainless steel mounting hardware and extremely tough polycarbonate optical lenses. LEDs are high output with low power consumption and are whiter and longer lasting than traditional work lights. They offer a 6500K output and 30,000 hours of long-life operation. 241 APT Lighting - LED LED Bar Lights (Narva) With unrivalled performance and unique design, these light bars utilise the latest in high output LED technology currently available. Fully sealed (IP68) with a super tough extruded aluminium housing ideal for the most gruelling work environments. Part No: 10222 Part No: 10223 Part No: 10224 Description: LIGHT BAR 4 x 10 WATT LED 9 - 32V FLOOD BEAM 3000 LUMENS Description: LIGHT BAR 8 x 10 WATT LED 9 - 32V FLOOD BEAM 6000 LUMENS Description: LIGHT BAR 8 x 10 WATT LED 9 - 32V WIDE FLOOD BEAM 6000 LUMENS Part No: 10225 Part No: 10226 Part No: 10227 Description: LIGHT BAR 12 x 10 WATT LED 9 - 32V FLOOD BEAM 9000 LUMENS Description: LIGHT BAR 16 x 10 WATT LED 9 - 32V FLOOD BEAM 12000 LUMENS Description: LIGHT BAR 20 x 10 WATT LED 9 - 32V FLOOD BEAM 15000 LUMENS Specialised Electrical Equipment APT 242 Lighting - LED LED Beacons The AusProTec™ LED Beacon combines the latest in electronic design and state of the art engineering technologies. Constructed with a rugged die-cast base with high impact clear polycarbonate lens this unit is designed to withstand the toughest environmental conditions. Eliminating the need to replace globes or strobe tubes, the AusProTec™ LED Beacon is a cost effective, low maintenance solution to your lighting needs. Part No: 6231 Part No: 10320 Description: LED ROTATING BEACON AMBER MULTI VOLTAGE PRECO # 7611A Description: LED ROTATING BEACON AMBER MULTI VOLTAGE Description: LED ROTATING BEACON BLUE MULTI VOLTAGE Part No: 10341 Part No: 10870 Part No: 10229 Description: LED ROTATING BEACON GREEN MULTI VOLTAGE Description: LED ROTATING BEACON RED MULTI VOLTAGE Description: UNIVERSAL BEACON MOUNT Specialised Electrical Equipment Part No: 7157 243 APT Lighting - LED Nordic LED N22, N26 and N460 Series The Nordic range of LED work lamps have been designed to withstand all environments without the need to replace globes. Housed in a uniquely designed aluminium body these lights support fully encapsulated LED technology making them suitable for almost any application. Part No: 7081 Part No: 10051 Part No: 7815 Description: LED WORKLAMP N26 SERIES 10-80V 17W Description: LED WORKLAMP N22 12/24V 24W Description: LED WORKLAMP N460 SERIES MULTI VOLTAGE Specialised Electrical Equipment APT 244 Lighting - Specialty VL Alloy Series The PowerLight™ VL series lights are one of the smallest floodlighting systems available on the market today. Robust cast alloy housings protect the glass faced, dichroic insert. Sealed to prevent corrosion of internal parts, these lights have an extremely high light output for their relatively small size and low current draw. The VL lights use low voltage DC for operation and do not require expensive ballasts, globes or lenses in case of damage. Part No: 7455 Part No: 9891 Description: VL ALLOY LAMP 12V 50 WATT WITH 300MM FLYING LEAD Description: VL ALLOY LAMP 24V 50 WATT WITH 300MM FLYING LEAD Description: REPLACEMENT LENS 12V 50 WATT TO SUIT 6727 Part No: 9997 Part No: 7472 Description: REPLACEMENT LENS 24V 50 WATT TO SUIT 7455 Description: SCISSOR MOUNT T/S VL ALLOY Specialised Electrical Equipment Part No: 6727 245 APT Machine Monitoring and Timers Angle Sensor The AusProTec™ Dual Axis Angle Sensor is housed in a tough and compact aluminium shell and has no moving parts. This feature ensures a robust and durable unit suitable for any mining or industrial application where monitoring of the platform angle is required. The unit is factory pre-set to 2.5 degrees on both the X and Y axis from the horizontal, therefore, the unit must be securely mounted on a horizontal surface. Once powered, the unit will provide a positive output when the tilt on either axis exceeds 2.5 degrees. Part No: 4797 Description: ANGLE SENSOR 2.5 DEGREES BOTH AXIS Specialised Electrical Equipment APT 246 Machine Monitoring and Timers Park Brake Warning The Park Brake Warning System is a unique product that incorporates the following features: DOOR SENSING The control unit senses when the door is opened or closed via proximity switches. PARK BRAKE SENSING The control unit senses the state of the park brake via a park brake switch. OPERATOR WARNING Operates a visual alarm and incorporates an output for the OEM horn circuit (RCT recommends this output be connected to the OEM horn circuit via a relay). KEY OVERRIDE FUNCTION The system incorporates a key override in the external circuit so that the system becomes inactive and maintenance can be carried out. SELF TEST FUNCTION When the control unit is first powered up, the alarms will self-test for approx. 1-2 seconds. LIGHT VEHICLE PARK BRAKE MODULE (PART NO. 8722) Part No: 0230 Part No: 8722 Description: PARK BRAKE WARNING KIT - PROXIMITY SWITCH ACTIVATED Description: PARK BRAKE WARNING ALARM - DOOR SWITCH ACTIVATED Specialised Electrical Equipment The 8722 alarm is used in a 12V light duty system. It monitors the handbrake switch and the door frame switch (the door frame switch is the switch mounted in the door frame that switches on the cab light when the door is opened) to provide audible and visual warning if the door is opened while the handbrake is not applied. Once the alarm starts, it stays latched on until the handbrake is applied (even if the door is closed again). 247 APT Machine Monitoring and Timers Timers (Multi Purpose) The AusProTec™ range of timers has been developed to provide a range of multi purpose solid state timer units. These units are available as “ON” or “OFF” timers. They can also be operated for extended periods of time in harsh conditions due to their sealed construction. For further technical information, please contact your nearest RCT branch. Part No: 2169 Part No: 2133 Part No: 2825 Description: TIMER ADJUSTABLE 1/4 SECOND - 2 HOUR Description: TIMER ADJUSTABLE 1/4 SECOND - 2 HOUR (OFF) Description: TIMER ADJUSTABLE 2 - 60 SECONDS Part No: 5685 Part No: 4421 Part No: 0354 Description: TIMER EDGE DETECT RESET Description: TIMER MULTI PURPOSE NOT ENCLOSED Description: TIMER PULSE 1 SECOND ON - OFF Specialised Electrical Equipment APT 248 Machine Monitoring and Timers Voltage Sensing Controllers The AusProTec™ Voltage Sensing Controllers have been designed so that the output from these units can alert the operator of low voltage situations or control the device directly. Specifications: • Input voltage: 10 – 35VDC • Adjustable trip voltage • Inbuilt voltage test points • Dipswitch adjustable hysteresis • High current protected • Environmentally sealed Part No: 0019 Specialised Electrical Equipment Description: VOLTAGE SENSING CONTROLLER 249 APT Rear Detection Greensight Ultrasonic The AusProTec™ Greensight Rear Detection system ensures that drivers are able to avoid the risk of collision while reversing, especially at night, in poor weather conditions and when there is very little room to manoeuvre. Through the use of two ultrasonic sensors an area of up to three metres behind the vehicle and across its entire width is able to be monitored. This informs the driver through a range of optical and audible signals as to of how far the vehicle is from any object or individual. The Greensight system identifies three different zones within its range, which the driver is able to monitor via a display seen through the corner of his/her eye. Each of these zones are differentiated by a unique warning. The system simply provides information that enables the driver to avoid possible rear end collisions. Part No: 4614 Part No: 8994 Part No: 11465 Description: REAR DETECTION SENSOR KIT GREENSIGHT Description: REPLACEMENT SENSOR TO SUIT 4614 Description: REPLACEMENT CONTROL UNIT TO SUIT 4614 Part No: 11462 Part No: 11464 Part No: 11463 Description: REPLACEMENT IN CAB DISPLAY TO SUIT 4614 Description: REPLACEMENT SENSOR CABLE TO SUIT 4614 Description: REPLACEMENT IN CAB DISPLAY CABLE TO SUIT 4614 Specialised Electrical Equipment Part No: 11461 Description: REPLACEMENT POWER CABLE TO SUIT 4614 APT 250 Rear Detection Xtreme Preview Radar System The Xtreme PreView Radar Detection System identifies both stationary and moving objects in a pre-determined coverage area with an alert sent to the operator to avoid harmful collision. Part No: 11316 Part No: 11317 Part No: 11116 Description: 1 SENSOR STANDARD DISPLAY KIT Description: 2 SENSOR STANDARD DISPLAY KIT Description: STANDARD DISPLAY TO SUIT XTREME PREVIEW Part No: 11472 Part No: 11117 Part No: 11118 Description: FRONT / REAR DISPLAY TO SUIT XTREME PREVIEW Description: CABLE EXTENSION 10M TO SUIT XTREME PREVIEW Description: CABLE CAB ADAPTER TO SUIT XTREME PREVIEW Part No: 11119 Part No: 11120 Part No: 11318 Description: SENSOR 10M 32 FOOT DETECTION TO SUIT XTREME PREVIEW Description: CABLE POWER ADAPTER TO SUIT XTREME PREVIEW Description: Y CABLE 12M TO SUIT DUAL SENSOR SYSTEM Part No: 11473 Part No: 11121 Description: ALARM SETUP ADAPTER Description: PROGRAMMING TOOL TO SUIT XTREME PREVIEW 251 Specialised Electrical Equipment The Xtreme PreView Radar Detection System is a solid-state, pulsed radar object detection system which reports the distance of the closest detected object via visual range indicators with an audible signal sent to the vehicle operator. APT Rear View Camera Systems - Maxi Vision 10.4" Camera Kits The AusProTec™ 10.4” Maxi Vision camera systems offer machine operators a new perspective on driving and operating their equipment. The range of single and multiple camera systems provide end users with choices as to the best camera system set up to suit their application. Specialised Electrical Equipment Part No: 6221 Part No: 7746 Part No: 10965 Description: 10.4" - 1 COLOUR CAMERA REAR VIEW KIT INCLUDING HEAVY DUTY MOUNTING (STANDARD CAMERA) Description: 10.4" - 2 COLOUR CAMERA REAR VIEW KIT INCLUDING HEAVY DUTY MOUNTING (STANDARD CAMERA) Description: 10.4" - 3 COLOUR CAMERA REAR VIEW KIT INCLUDING HEAVY DUTY MOUNTING (STANDARD CAMERA) Part No: 10966 Part No: 11696 Part No: 11697 Description: 10.4" - 4 COLOUR CAMERA REAR VIEW KIT INCLUDING HEAVY DUTY MOUNTING (STANDARD CAMERA) Description: 10.4" - 1 COLOUR CAMERA REAR VIEW KIT INCLUDING HEAVY DUTY MOUNTING (HEAVY DUTY CAMERA) Description: 10.4" - 2 COLOUR CAMERA REAR VIEW KIT INCLUDING HEAVY DUTY MOUNTING (HEAVY DUTY CAMERA) Part No: 11698 Part No: 11699 Description: 10.4" - 3 COLOUR CAMERA REAR VIEW KIT INCLUDING HEAVY DUTY MOUNTING (HEAVY DUTY CAMERA) Description: 10.4" - 4 COLOUR CAMERA REAR VIEW KIT INCLUDING HEAVY DUTY MOUNTING (HEAVY DUTY CAMERA) APT 252 Rear View Camera Systems - Maxi Vision 15" Camera Kits The AusProTec™ 15” Maxi Vision camera systems offer machine operators a new perspective on driving and operating their equipment. The range of single and multiple camera systems provide end users with choices as to the best camera system set up to suit their application. Part No: 10968 Part No: 10969 Description: 15" - 1 COLOUR CAMERA REAR VIEW KIT (STANDARD CAMERA) Description: 15" - 2 COLOUR CAMERA REAR VIEW KIT (STANDARD CAMERA) Description: 15" - 3 COLOUR CAMERA REAR VIEW KIT (STANDARD CAMERA) Part No: 10970 Part No: 11701 Part No: 11702 Description: 15" - 4 COLOUR CAMERA REAR VIEW KIT (STANDARD CAMERA) Description: 15" - 1 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 15" - 2 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) Part No: 11703 Part No: 11704 Description: 15" - 3 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 15" - 4 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) Specialised Electrical Equipment Part No: 10967 253 APT Rear View Camera Systems - Maxi Vision 19" Camera Kits The AusProTec™ 19” Maxi Vision camera systems offer machine operators a new perspective on driving and operating their equipment. The range of single and multiple camera systems provide end users with choices as to the best camera system set up to suit their application. Part No: 11705 Part No: 11706 Part No: 11707 Description: 19" - 1 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 19" - 2 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 19" - 3 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) Part No: 11708 Description: 19" - 4 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) Rear View Camera Systems - Maxi Vision 5" Camera Kits - Heavy Duty Specialised Electrical Equipment The AusProTec™ 5” Waterproof Maxi Vision camera systems offer machine operators a new perspective on driving and operating their equipment. The range of single and multiple camera systems provide end users with choices as to the best camera system set up to suit their application. The AusProTec™ Maxi Vision range of colour Waterproof LCD monitor and camera options are robust in design and are ideally suited to industrial and mining applications. APT 254 Part No: 3630 Part No: 3648 Part No: 3628 Description: 5 " - 1 BLACK & WHITE CAMERA REAR VIEW KIT (STANDARD CAMERA) Description: 5 " - 1 COLOUR CAMERA REAR VIEW KIT (STANDARD CAMERA) Description: 5 " - 2 BLACK & WHITE CAMERA REAR VIEW KIT (STANDARD CAMERA) Part No: 3638 Part No: 3624 Part No: 3617 Description: 5 " - 2 COLOUR CAMERA REAR VIEW KIT (STANDARD CAMERA) Description: 5 " - 3 BLACK & WHITE CAMERA REAR VIEW KIT (STANDARD CAMERA) Description: 5 " - 3 COLOUR CAMERA REAR VIEW KIT (STANDARD CAMERA) Part No: 9391 Part No: 11688 Part No: 11689 Description: 5" - 1 COLOUR CAMERA REAR VIEW KIT LIGHT VEHICLE APPLICATION 6403 CAMERA Description: 5 " - 1 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 5 " - 2 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) Part No: 11690 Specialised Electrical Equipment Description: 5 " - 3 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) 255 APT Rear View Camera Systems - Maxi Vision 7" Camera Kits - Commercial Vehicle The AusProTec™ 7” Commercial Vehicle Maxi Vision camera systems offer machine operators a new perspective on driving and operating their equipment. The range of single and multiple camera systems provide end users with choices as to the best camera system set up to suit their application. The AusProTec™ Commercial Vehicle Maxi Vision range of colour LCD monitor and camera options are robust in design and are ideally suited to all commercial applications. Part No: 11931 Part No: 11932 Part No: 11933 Description: 7 " - 1 COLOUR CAMERA REAR VIEW KIT (COMMERCIAL VEHICLE) Description: 7 " - 2 COLOUR CAMERA REAR VIEW KIT (COMMERCIAL VEHICLE) Description: 7 " - 3 COLOUR CAMERA REAR VIEW KIT (COMMERCIAL VEHICLE) Part No: 11934 Description: 7 " - 4 COLOUR CAMERA REAR VIEW KIT (COMMERCIAL VEHICLE) Specialised Electrical Equipment APT 256 Rear View Camera Systems - Maxi Vision 7" Camera Kits - Heavy Duty Part No: 4271 Part No: 4218 Part No: 4272 Description: 7 " - 1 BLACK & WHITE CAMERA REAR VIEW KIT (STANDARD CAMERA) Description: 7 " - 1 COLOUR CAMERA REAR VIEW KIT (STANDARD CAMERA) Description: 7 " - 2 BLACK & WHITE CAMERA REAR VIEW KIT (STANDARD CAMERA) Part No: 4219 Part No: 8810 Part No: 4108 Description: 7 " - 2 COLOUR CAMERA REAR VIEW KIT (STANDARD CAMERA) Description: 7 " - 3 BLACK & WHITE CAMERA REAR VIEW KIT (STANDARD CAMERA) Description: 7 " - 3 COLOUR CAMERA REAR VIEW KIT (STANDARD CAMERA) Part No: 8811 Part No: 8816 Part No: 11691 Description: 7 " - 4 BLACK & WHITE CAMERA REAR VIEW KIT (STANDARD CAMERA) Description: 7 " - 4 COLOUR CAMERA REAR VIEW KIT (STANDARD CAMERA) Description: 7 " - 1 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) Part No: 11692 Part No: 11694 Part No: 11695 Description: 7 " - 2 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 7 " - 3 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 7 " - 4 COLOUR CAMERA REAR VIEW KIT (HEAVY DUTY CAMERA) 257 APT Specialised Electrical Equipment The AusProTec™ 7” Waterproof Maxi Vision camera systems offer machine operators a new perspective on driving and operating their equipment. The range of single and multiple camera systems provide end users with choices as to the best camera system set up to suit their application.The AusProTec™ Maxi Vision range of colour Waterproof LCD monitor and camera options are robust in design and are ideally suited to industrial and mining applications. Rear View Camera Systems - Maxi Vision Cameras The Maxi Vision range of cameras have been specifically designed to suit the harshest of environments. These IP67 rated units can be adapted to suit any application. Specialised Electrical Equipment Part No: 6403 Part No: 11858 Part No: 0683 Description: COLOUR CAMERA LIGHT DUTY 120° (SMALL) Description: COLOUR CAMERA IP68 CCD HAD II (SMALL) Description: BLACK AND WHITE CAMERA 110° Part No: 11857 Part No: 11586 Part No: 11925 Description: COLOUR CAMERA IP69 CCD HAD II Description: COLOUR CAMERA HIGH RESOLUTION HEAVY DUTY CCD HAD II 94° Description: INTERNAL CAMERA TO SUIT 11586 120° Part No: 11924 Part No: 11923 Description: INTERNAL CAMERA TO SUIT 11586 105° Description: INTERNAL CAMERA TO SUIT 11586 28° APT 258 Rear View Camera Systems - Maxi Vision Digital Video Recorder The Maxi Vision Digital Video Recorder (DVR) is robust in design and ideally suited to industrial and mining applications. Housed in an aluminium casing this recorder is designed to stand up to the harshest of environments. This multi voltage unit comes complete with heavy duty Solid State Drive (SSD), GPS Antenna, Remote Control and four camera input. View all recorded images on screen (Four camera view including displayed GPS co-ordinates and GPS speed indicator). Images are easily downloaded by the AusProTec Maxi Vision PC Viewer showing over speed, events, driving route, speed, time, location and GPS tracking via Google map interface (Terrain or Map display available). This all in one unit is your solution for driver management, events recording, machine monitoring and training. Part No: 10895 Part No: 10896 Part No: 10898 Description: MAXI VISION DVR RECORDER WITH SSD DRIVE ASSEMBLY Description: SSD DRIVE ASSEMBLY TO SUIT 10895 Description: SPARE KEY SET TO SUIT10895 Part No: 10920 Specialised Electrical Equipment Description: SPARE GPS ANTENNA TO SUIT 10895 259 APT Rear View Camera Systems - Maxi Vision Digital Video Recorder Camera Kits The Maxi Vision Digital Video Recorder (DVR) is robust in design and ideally suited to industrial and mining applications. Housed in an aluminium casing this recorder is designed to stand up to the harshest of environments. This multi voltage unit comes complete with heavy duty Solid State Drive (SSD), GPS Antenna, Remote Control and four camera input. View all recorded images on screen (Four camera view including displayed GPS co-ordinates and GPS speed indicator). Images are easily downloaded by the AusProTec™ Maxi Vision PC Viewer showing over speed, events, driving route, speed, time, location and GPS tracking via Google map interface (Terrain or Map display available). This all in one unit is your solution for driver management, events recording, machine monitoring and training. Specialised Electrical Equipment Part No: 11713 Part No: 11714 Part No: 11715 Description: 5 " - 1 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 5 " - 2 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 5 " - 3 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Part No: 10948 Part No: 11709 Part No: 10949 Description: 7 " - 1 COLOUR CAMERA DVR REAR VIEW KIT (STANDARD CAMERA) Description: 7 " - 1 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 7 " - 2 COLOUR CAMERA DVR REAR VIEW KIT (STANDARD CAMERA) Part No: 11710 Part No: 10950 Part No: 11711 Description: 7 " - 2 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 7 " - 3 COLOUR CAMERA DVR REAR VIEW KIT (STANDARD CAMERA) Description: 7 " - 3 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) APT 260 Part No: 10951 Part No: 10954 Description: 7 " - 4 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 7 " - 4 COLOUR CAMERA DVR REAR VIEW KIT (STANDARD CAMERA) Description: 10.4 " - 1 COLOUR CAMERA DVR REAR VIEW KIT (STANDARD CAMERA) Part No: 11717 Part No: 10955 Part No: 11718 Description: 10.4 " - 1 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 10.4 " - 2 COLOUR CAMERA DVR REAR VIEW KIT (STANDARD CAMERA) Description: 10.4 " - 2 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Part No: 10956 Part No: 11719 Part No: 10957 Description: 10.4 " - 3 COLOUR CAMERA DVR REAR VIEW KIT (STANDARD CAMERA) Description: 10.4 " - 3 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 10.4 " - 4 COLOUR CAMERA DVR REAR VIEW KIT (STANDARD CAMERA) Part No: 11720 Part No: 11721 Part No: 11722 Description: 10.4 " - 4 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 15 " - 1 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 15 " - 2 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) 261 Specialised Electrical Equipment Part No: 11712 APT Part No: 11723 Part No: 11724 Part No: 11725 Description: 15 " - 3 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 15 " - 4 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 19 " - 1 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Part No: 11726 Part No: 11727 Part No: 11728 Description: 19 " - 2 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 19 " - 3 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Description: 19 " - 4 COLOUR CAMERA DVR REAR VIEW KIT (HEAVY DUTY CAMERA) Rear View Camera Systems - Maxi Vision Forklift Camera System The AusProTec™ Maxi Vision Camera systems offer forklift operators a new perspective on driving and operating their equipment. The camera systems are designed to enhance safety by improving the operator’s vision when performing such tasks as lifting, transporting loads or reversing the forklift. The systems are suitable for use on small or large forklift trucks, battery or I/C models. The AusProTec™ Maxi Vision range of colour LCD monitor and camera options are robust in design and are ideally suited to industrial equipment. Heavy duty casing and mounting options are also available to suit custom applications. The camera system has been designed to suit forklifts and includes pulleys, heavy duty cabling, special mounting and fittings to enable reliable installation to most electrical and IC forklifts. Specialised Electrical Equipment Part No: 6660 Description: FORKLIFT MAST CAMERA KIT APT 262 Rear View Camera Systems - Maxi Vision Looms and Adaptors The Maxi Vision looms and adaptors have been designed to integrate the Maxi Vision range with current machine infrastructure. Part No: 11927 Part No: 11928 Part No: 11929 Description: 1 CAMERA INPUT LOOM TO SUIT 8030 MONITOR Description: 2 CAMERA INPUT LOOM TO SUIT 8030 MONITOR Description: 3 CAMERA INPUT LOOM TO SUIT 8030 MONITOR Part No: 11930 Part No: 2951 Part No: 4946 Description: 4 CAMERA INPUT LOOM TO SUIT 8030 MONITOR Description: ADAPTOR KIT MINI DIN TO DEUTSCH Description: ADAPTOR LOOM 11586 / 5555 TO MAXI VISION CAMERA Part No: 1346 Part No: 5593 Part No: 6450 Description: EXTENSION LOOM 15FT / 5M TO SUIT 11857 / 4118 / 0683 CAMERA Description: EXTENSION LOOM 70FT / 20M TO SUIT 11857 / 4118 / 0683 CAMERA Description: EXTENSION LOOM 7M TO SUIT 6403 CAMERA Part No: 8093 Part No: 11373 Part No: 7256 Description: ADAPTOR LOOM MINI DIN TO RCA INPUT Description: ADAPTOR LOOM TO SUIT 10895 DVR SYSTEM Description: REPLACEMENT LOOM TO SUIT 7205 / 7206 MONTIOR 263 Specialised Electrical Equipment For further information, please contact your nearest RCT branch. APT Part No: 7326 Part No: 2880 Description: ADAPTOR LOOM 5555 CAMERA TO 1754 MONITOR Description: ADAPTOR LOOM RCA MALE TO RCA MALE 1M Rear View Camera Systems - Maxi Vision Monitors The Maxi Vision range of monitors has been specifically designed to suit the harshest of environments. From the Waterproof 5” and 7“models to the 15” and 19” monitors these vision accessories can be adapted to suit any application. For further information, please contact your nearest RCT branch. Specialised Electrical Equipment Part No: 9299 Part No: 11939 Part No: 11927 Description: 5" WATERPROOF MONITOR COLOUR TFT IP67 HEAVY DUTY Description: 7" WATERPROOF MONITOR COLOUR TFT IP67 HEAVY DUTY (FORMALLY 8030) Description: 1 CAMERA INPUT LOOM TO SUIT 11939 MONITOR Part No: 11928 Part No: 11929 Part No: 11930 Description: 2 CAMERA INPUT LOOM TO SUIT 11939 MONITOR Description: 3 CAMERA INPUT LOOM TO SUIT 11939 MONITOR Description: 4 CAMERA INPUT LOOM TO SUIT 11939 MONITOR APT 264 Part No: 11926 Part No: 11942 Part No: 11943 Description: 7" MONITOR COLOUR TFT IP65 COMMERCIAL VEHICLE Description: 1 CAMERA INPUT LOOM TO SUIT 11926 MONITOR Description: 2 CAMERA INPUT LOOM TO SUIT 11926 MONITOR Part No: 11944 Part No: 11945 Part No: 5670 Description: 3 CAMERA INPUT LOOM TO SUIT 11926 MONITOR Description: 4 CAMERA INPUT LOOM TO SUIT 11926 MONITOR Description: TELEVISION 7" 12 VOLT TFT Part No: 11935 Part No: 1754 Part No: 7205 Description: 10.4" MONITOR 12V COLOUR TFT METAL CASE Description: 10.4" MONITOR 12V COLOUR TFT PLASTIC CASE Description: 15" MONITOR 12V COLOUR LCD Part No: 7206 Specialised Electrical Equipment Description: 19" MONITOR 12V COLOUR LCD 265 APT Rear View Camera Systems - Maxi Vision Mounting Kits and Enclosures The Maxi Vision range of mounting kits and enclosures has been designed to integrate with current machine infrastructure. These specific mounting options have been manufactured to allow Maxi Vision systems to be mounted in different applications and positions in and around the cab. For further information, please contact your nearest RCT branch. Part No: 8420 Part No: 8421 Part No: 8795 Description: MOUNTING KIT TO SUIT 9299 MONITOR LIGHT DUTY Description: MOUNTING KIT TO SUIT 8030 MONITOR LIGHT DUTY Description: MOUNTING KIT TO SUIT 8030 / 9299 MONITOR (RAM MOUNT) Part No: 5893 Part No: 10974 Part No: 7871 Description: MOUNTING KIT TO SUIT 1754 MONITOR Description: MOUNTING KIT TO SUIT 7205 MONITOR (RAM MOUNT) Description: MOUNTING KIT TO SUIT 7206 MONITOR Specialised Electrical Equipment Part No: 1756 Description: ENCLOSURE TO SUIT 0683 / 4118 CAMERA APT 266 Rear View Camera Systems - Maxi Vision Quad Splitter The Maxi Vision Quad Splitter has been specifically designed to integrate multiple cameras into any Maxi Vision monitor. Including four trigger line inputs this unit can display 1 / 2 / 3 / or 4 images on screen at the same time. For further information, please contact your nearest RCT branch. Part No: 6838 Description: QUAD SPLITTER BOX 4 CAMERA INPUT Reducers and Regulators Power Conditioners (Maxi Range) With digital over analogue control the “Maxi” Isolated Switch Mode Power Conditioner series is second-to-none in terms of performance, with a host of features and benefits to assist the installer and operator. The “Maxi” series, like its predecessor, boasts input to output isolation, ensuring no common connectivity between the line and load whatsoever. This means peace-of-mind when connecting sensitive and often expensive, high end electronic equipment on the output. Part No: 11454 Part No: 11456 Description: POWER CONDITIONER 12-12VDC 10AMP Description: POWER CONDITIONER 24-24VDC 10AMP Specialised Electrical Equipment New features to this product include a unique operator interface which allows the user to control and monitor items such as voltage output and actual current load. The unit features pre-emptive alarms to warn of impending shutdown which can also be monitored remotely. Multi-stage fan cooling enables the unit to run in the hottest of environments and it can now be mounted in any position as it no longer relies on convective cooling. It can also be remotely isolated without having to run heavy cable to and from the control location; a simple signal cable will do the job. 267 APT Reducers and Regulators Power Conditioners (Mini Range) The “Mini” Series Power Conditioners are a new compact version of our popular heavy duty range. An innovative product, the Power Conditioners are designed to address the many issues associated with on-board power problems including voltage surges, transients, spikes, etc. They are a converter, stabiliser, isolator and regulator all in a single package. The “Mini” Series Power Conditioner is galvanically isolated (input to output) and designed to protect sensitive and often expensive equipment connected to 12 or 24VDC power sources. Part No: 11453 Part No: 11455 Description: POWER CONDITIONER 12-12V 7AMP Description: POWER CONDITIONER 24-24VDC 5AMP Reducers and Regulators Voltage Convertors (Maxi Range) The Generation II Switch Mode Voltage Converter offers previously unheard of performance and a myriad of features, including digital over analogue control. The new, unique operator interface allows the user to control and monitor items such as voltage output and actual current load. This unit includes features such as pre-emptive alarms to warn of impending shutdown which can also be monitored remotely. Multi-stage fan cooling enables the unit to run in the hottest of environments and can now be mounted in any position as it no longer relies on convective cooling. It can also be remotely isolated at the flick of a switch and a separate, independent output provides a constant low power supply for items such as security systems. Specialised Electrical Equipment Part No: 11293 Part No: 11294 Description: VOLTAGE CONVERTER 24-12VDC 25AMP Description: VOLTAGE CONVERTER 24-12VDC 35AMP APT 268 Reducers and Regulators Voltage Convertors (Mini Range) The success of the “Maxi” Switch Mode Voltage Convertor range of heavy duty 24-12VDC voltage converters has led to the development of the new compact version for low power applications. The innovative “Mini” series range is targeted at the light vehicle market and is ideal for powering communications, instrumentation and other electronic equipment. Part No: 7819 Part No: 7823 Description: VOLTAGE CONVERTOR 24-12VDC 7AMP Description: VOLTAGE CONVERTER 24-12VDC 10AMP Specialised Electrical Equipment The new Switch Mode Voltage Convertor is enclosed in an extruded aluminium housing which is not only technically superior but practical and stylish. 269 APT Reducers and Regulators Voltage Reducers and Regulators The AusProTec™ range of voltage reducers / regulators has been developed to provide multiple solutions for your voltage reducing / regulating needs. For further information, please contact your nearest RCT branch. Part No: 3876 Part No: 5072 Part No: 5976 Description: VOLTAGE REDUCER 9-32VDC INPUT 12VDC 2A OUTPUT Description: VOLTAGE REDUCER 24-12VDC 2A Description: VOLTAGE REDUCER 24-13.8VDC 3.5A Part No: 7701 Part No: 6345 Part No: 6473 Description: VOLTAGE REDUCER 24-13.8VDC 5A Description: VOLTAGE REDUCER 24-13.8VDC 10A Description: VOLTAGE REDUCER 24-13.8VDC 20A Specialised Electrical Equipment Part No: 0935 Description: VOLTAGE REDUCER 24-12VDC 20A REGULATED APT 270 Relays and Bases Relays and Bases (Bosch) RCT offers an assortment of relays for 12 and 24v applications. All of the listed relays have a proven track record in the mining and industrial sectors, providing reliable trouble free operation. Available in standard, change over, mountable and/or diode protected. Please refer to your local RCT branch for further information. Part No: 1523 Part No: 2401 Description: RELAY 24V 50A 87 MOUNTABLE HEAVY DUTY BOSCH # 0 332 002 250 Description: RELAY 12V 30A 2x87 MOUNTABLE BOSCH # 0 332 014 125 Description: RELAY 24V 20A 2x87 MOUNTABLE BOSCH # 0 332 014 203 Part No: 1405 Part No: 10593 Part No: 10818 Description: RELAY 12V 20/30A 87/87A DIODE PROTECTED MOUNTABLE BOSCH # 0 332 209 158 Description: RELAY 24V 10/20A 87/87A DIODE PROTECTED MOUNTABLE BOSCH # 0 332 204 212 Description: RELAY 12V 30A 2x87 DIODE PROTECTED MOUNTABLE BOSCH # 0 332 019 155 Part No: 1518 Part No: 3281 Part No: 4351 Description: RELAY 24V 10/20A 87/87A BOSCH # 0 332 204 202 Description: RELAY 24V 10/20A 87/87A MOUNTABLE BOSCH # 0 332 204 203 Description: RELAY 24V 10/20A 87/87A DIODE PROTECTED BOSCH # 0 332 209 204 Part No: 6514 Part No: 0497 Part No: 1425 Description: RELAY MICRO 12V 87/87A DIODE PROTECTED BOSCH # 0 332 207 304 Description: RELAY MICRO 24V 87/87A DIODE PROTECTED BOSCH # 0 332 207 402 Description: RELAY 12V 20/30A 87/87A MOUNTABLE BOSCH # 0 332 209 150 Part No: 9029 Part No: 0496 Part No: 0966 Description: RELAY 12V 20/30A 87/87A DIODE PROTECTED BOSCH # 0 332 209 152 Description: BASE TO SUIT MICRO RELAY MOUNTABLE BOSCH # 3 334 485 045 Description: BASE RELAY MOUNTABLE BOSCH # 3 334 485 008 Part No: 0505 Part No: 0482 Part No: 1044 Description: BASE RELAY PLUG TYPE BOSCH # 3 334 485 007 Description: RECEPTACLE TO SUIT MINI RELAY 4.8MM BOSCH # 1 904 492 016 Description: RECEPTACLE TO SUIT STANDARD RELAY BASES BOSCH # 1 901 355 917 Specialised Electrical Equipment Part No: 2941 271 APT Relays and Bases Relays and Bases (Hella) RCT offers an assortment of relays for 12 and 24v applications. All of the listed relays have a proven track record in the mining and industrial sectors, providing reliable trouble free operation. Available in standard, change over, mountable and/or diode protected. Please refer to your local RCT branch for further information. Part No: 7067 Part No: 9463 Part No: 9031 Description: RELAY 12V 30 AMP SINGLE Description: RELAY 24V 20 AMP 1 x 87A MOUNTABLE Description: RELAY BASE TO SUIT 7067 & 9463 Senders, Switches and Probes Backup (Mechanical) Water resistant, metal housing with a 5 amp rating and a full 360° movement. This AusProTec™ switch can be wired in the field "normally open" or "normally closed." The housing has C.S.A approval and is U.L. recognised. It includes an adjustable mounting bracket and is used by major OEMs. • Temperature rating: -13°F to +176°F (-25°C to +80°C) Part No: 5602 Specialised Electrical Equipment Description: MECHANICAL BACKUP SWITCH APT 272 Senders, Switches and Probes Coolant Level The following products are a selection of coolant level probes suited to the coolant level applications. For additional products, please refer to the Muirheah® section of our catalogue. Part No: 3552 Part No: 2006 Description: COOLANT PROBE BRASS 1/4 NPT Description: COOLANT PROBE LIGHT DUTY RUBBER EXPANSION Description: COOLANT PROBE PLASTIC 1/8 NPT Part No: 0029 Part No: 8145 Part No: 7621 Description: BUSH TO SUIT 2006 PROBE Description: INSULATOR TO SUIT 2006 PROBE Description: TERMINAL TO SUIT 2006 PROBE Part No: 2887 Part No: 6510 Description: COOLANT PROBE PLASTIC WITH BRASS ADAPTOR 1/4 NPT Description: COOLANT LEVEL CAPACITIVE SWITCH 1/4 NPT Specialised Electrical Equipment Part No: 2205 273 APT Senders, Switches and Probes Flow These sealed flow switches are used to detect fluid movement in a range of applications such as radiator pipes and industrial water pumps. Each switch is oil filled and environmentally sealed with a paddle length of 56 - 69mm. Part No: 6041 Part No: 3690 Description: FLOW SWITCH NORMALLY OPEN 56MM PLUG Description: FLOW SWITCH NORMALLY OPEN 69MM PADDLE Senders, Switches and Probes Hall Effect These units are compact in design but heavy duty in performance. Housed in a sealed aluminium casing designed to endure severe automotive and industrial environments, this versatile rotary pulser provides solid state accuracy and reliability. Part No: 11123 Description: HALL EFFECT SENSOR 12/24V WITH PULL UP RESISTOR Specialised Electrical Equipment APT 274 Senders, Switches and Probes Pressure (Cat Style) The following products are a selection of pressure switches manufactured and distributed by the OEM. For further information, please contact your nearest RCT branch. Part No: 0729 Part No: 0018 Part No: 8725 Description: PRESSURE SWITCH 10PSI 0.12PTF NORMALLY OPEN Description: PRESSURE SWITCH 13PSI 0.12PTF NORMALLY OPEN Description: PRESSURE SWITCH 9 PSI 1/8NPT NORMALLY OPEN Senders, Switches and Probes Pressure (Hobbs) Hobbs pressure switches have been designed as a low cost alternative for heavy duty equipment in applications that are constantly subjected to harsh environments from chemical splashes, salt water and high pressure spikes. Part No: 7741 Part No: 7739 Part No: 5590 Description: PRESSURE SWITCH 10PSI 1/8NPT DUAL CIRCUIT Description: PRESSURE SWITCH 10PSI 1/8NPT NORMALLY OPEN Description: PRESSURE SWITCH 4PSI 1/8NPT DUAL CIRCUIT Part No: 9753 Part No: 9752 Part No: 2124 Description: PRESSURE SWITCH 4PSI 1/8NPT NORMALLY CLOSED Description: PRESSURE SWITCH 4PSI 1/8NPT NORMALLY OPEN Description: PRESSURE SWITCH 60PSI 1/8NPT DUAL CIRCUIT Specialised Electrical Equipment Part No: 3074 Description: PRESSURE SWITCH 8PSI 1/8NPT NORMALLY OPEN 275 APT Senders, Switches and Probes Pressure (Nason) Nason pressure switches are used in many pneumatic and hydraulic systems. Typical applications include marine, agricultural, construction, earthmoving, industrial and mining equipment. Normal operational life of Nason switches is in excess of one million cycles. • Temperature and pressure switches • Available media connections 1/8 NPT - 1/2 NPT • A unique variety of electrical contact arrangements • Snap action switching • Pressure switches incorporate elastomeric diaphragms Specialised Electrical Equipment Part No: 2348 Part No: 5236 Part No: 0475 Description: PRESSURE SWITCH 900KPA FALLING 1/8NPT DUAL CIRCUIT Description: PRESSURE SWITCH 1050KPA FALLING 1/8NPT DUAL CIRCUIT Description: PRESSURE SWITCH 1200KPA FALLING 1/8NPT DUAL CIRCUIT Part No: 7135 Part No: 4800 Part No: 6778 Description: PRESSURE SWITCH 1200KPA FALLING 1/8NPT DUAL CIRCUIT REVERSE PLUG Description: PRESSURE SWITCH 200KPA FALLING 1/8NPT DUAL CIRCUIT Description: PRESSURE SWITCH 200KPA RISING 1/8NPT DUAL CIRCUIT Part No: 8430 Part No: 3429 Part No: 3430 Description: PRESSURE SWITCH 4PSI RISING M14 x 1.5MM NORMALLY CLOSED Description: PRESSURE SWITCH 16PSI FALLING 1/8NPT NORMALLY OPEN Description: PRESSURE SWITCH 9PSI FALLING 1/8NPT NORMALLY OPEN APT 276 Part No: 0272 Part No: 3131 Description: PRESSURE SWITCH 8PSI FALLING 1/8NPT DUAL CIRCUIT Description: PRESSURE SWITCH 60PSI FALLING 1/8NPT DUAL CIRCUIT Description: PRESSURE SWITCH 5PSI FALLING 1/8NPT DUAL CIRCUIT Part No: 5619 Part No: 1015 Part No: 9357 Description: PRESSURE SWITCH 8PSI FALLING 1/8NPT DUAL CIRCUIT Description: PRESSURE SWITCH 12PSI FALLING 1/8NPT DUAL CIRCUIT Description: PRESSURE SWITCH 20PSI FALLING 1/8NPT DUAL CIRCUIT Part No: 6150 Part No: 0078 Part No: 2805 Description: PRESSURE SWITCH ADJUSTABLE 900 - 3000PSI 1/8NPT DUAL CIRCUIT Description: PRESSURE SWITCH 20PSI RISING 1/8NPT DUAL CIRCUIT Description: PRESSURE SWITCH 100PSI FALLING 1/8NPT DUAL CIRCUIT Part No: 2225 Part No: 0178 Description: PRESSURE SWITCH 145PSI FALLING 1/8NPT DUAL CIRCUIT Description: PRESSURE SWITCH 130PSI FALLING 1/8NPT DUAL CIRCUIT Specialised Electrical Equipment Part No: 8485 277 APT Senders, Switches and Probes Proximity Proximity switches are used in several of our protection systems. Possible applications include tray up and belt break detection. Switches are available with a maximum sensing distance of 30mm, multivoltage and in plastic or steel construction. Please refer to your nearest RCT branch for further information. Specialised Electrical Equipment Part No: 3301 Part No: 0398 Part No: 3933 Description: PROXIMITY SWITCH 12MM NO LEAD Description: PROXIMITY SWITCH 20MM SENSE Description: PROXIMITY SWITCH 20MM SENSE 3 WIRE Part No: 1218 Part No: 1593 Part No: 2156 Description: PROXIMITY SWITCH 30MM SENSE 3 WIRE Description: PROXIMITY SWITCH 30MM SENSE NORMALLY OPEN Description: PROXIMITY SWITCH 34MM 20MM SENSE 2 WIRE LED INDICATOR Part No: 7719 Part No: 7680 Part No: 7357 Description: PROXIMITY SWITCH M12 4MM SENSE - INTRINSICALLY SAFE Description: PROXIMITY SWITCH M18 12 - 48 VOLT Description: PROXIMITY SWITCH M18x1 8MM SENSE 2 WIRE NORMALLY CLOSED Part No: 6812 Part No: 6568 Part No: 4072 Description: PROXIMITY SWITCH M18x1 8MM SENSE 2 WIRE NORMALLY OPEN Description: PROXIMITY SWITCH NPN NORMALLY CLOSED Description: PROXIMITY SWITCH NPN NORMALLY OPEN APT 278 Senders, Switches and Probes Temperature (General) The following products are a selection of AusProTec™ Temperature Switches suited for general applications. Part No: 11807 Part No: 11808 Part No: 11809 Description: TEMPERATURE SWITCH 50°C NORMALLY CLOSED 1/8NPT Description: TEMPERATURE SWITCH 50°C NORMALLY OPEN 1/8NPT Description: TEMPERATURE SWITCH 60°C NORMALLY CLOSED 1/8NPT Part No: 11810 Part No: 11811 Part No: 11812 Description: TEMPERATURE SWITCH 60°C NORMALLY OPEN 1/8NPT Description: TEMPERATURE SWITCH 70°C NORMALLY OPEN 1/8NPT Description: TEMPERATURE SWITCH 75°C NORMALLY CLOSED 1/8NPT Part No: 11813 Part No: 11803 Part No: 11804 Description: TEMPERATURE SWITCH 80°C NORMALLY OPEN 1/8NPT Description: TEMPERATURE SWITCH 85°C NORMALLY CLOSED 1/8NPT Description: TEMPERATURE SWITCH 95°C NORMALLY CLOSED 1/8NPT 279 Specialised Electrical Equipment For further information, please contact your nearest RCT branch. APT Part No: 11805 Part No: 9454 Part No: 9455 Description: TEMPERATURE SWITCH 95°C NORMALLY OPEN 1/8NPT Description: TEMPERATURE SWITCH 100°C NORMALLY CLOSED 1/8 NPT Description: TEMPERATURE SWITCH 100°C NORMALLY OPEN 1/8 NPT Part No: 6796 Part No: 6225 Part No: 7516 Description: TEMPERATURE SWITCH 125°C NORMALLY CLOSED 1/8 NPT 15MM SHAFT LENGTH Description: TEMPERATURE SWITCH 125°C NORMALLY CLOSED 1/8 NPT 25MM SHAFT LENGTH Description: TEMPERATURE SWITCH 150°C M10 TO SUIT DEUTZ ENGINES Part No: 9779 Part No: 1232 Description: TEMPERATURE SWITCH 170°C M10 TO SUIT DEUTZ ENGINES Description: TEMPERATURE SWITCH 180°C M10 TO SUIT DEUTZ ENGINES Specialised Electrical Equipment APT 280 Senders, Switches and Probes Temperature (Kidde-Fenwal) These temperature switches are designed specifically for applications where high temperature exposure, hermeticity and vibration resistance are required. A snap acting, bi-metal disc, mounted in the tip of the probe, provides fast thermal response and rapid positive contact action when the pre-set temperature is reached. The probe's body and tube are of all welded, stainless steel construction with glass to metal seals to ensure hermeticity. Switch design and construction provide high vibration and shock resistance. High contact force and the excellent wiping action of the contacts combine to make the probe suitable for light loads of 100 milli amperes or less. Part No: 1764 Part No: 1765 Description: TEMPERATURE SWITCH 205°F NORMALY CLOSED 2 TERMINAL 3/8NPT Description: TEMPERATURE SWITCH 212°F NORMALY CLOSED 2 TERMINAL 3/8NPT Description: TEMPERATURE SWITCH 220°F NORMALY CLOSED 2 TERMINAL 3/8NPT Part No: 1766 Part No: 2412 Part No: 1767 Description: TEMPERATURE SWITCH 230°F NORMALY CLOSED 2 TERMINAL 3/8NPT Description: TEMPERATURE SWITCH 230°F NORMALY CLOSED 2 SPADE TERMINAL 3/8NPT Description: TEMPERATURE SWITCH 250°F NORMALY CLOSED 2 TERMINAL 3/8NPT Part No: 7166 Part No: 1768 Part No: 7167 Description: TEMPERATURE SWITCH 265°F NORMALY CLOSED 2 TERMINAL 3/8NPT Description: TEMPERATURE SWITCH 275°F NORMALY CLOSED 2 TERMINAL 3/8NPT Description: TEMPERATURE SWITCH 280°F NORMALY CLOSED 2 TERMINAL 3/8NPT Part No: 7168 Part No: 2073 Part No: 2219 Description: TEMPERATURE SWITCH 300°F NORMALY CLOSED 2 TERMINAL 3/8NPT Description: TEMPERATURE SWITCH 205°F NORMALY OPEN 2 TERMINAL 3/8NPT Description: TEMPERATURE SWITCH 212°F NORMALY OPEN 2 TERMINAL 3/8NPT Part No: 2218 Part No: 1359 Description: TEMPERATURE SWITCH 220°F NORMALY OPEN 2 TERMINAL 3/8NPT Description: TEMPERATURE SWITCH 266°F NORMALY OPEN 2 TERMINAL 3/8NPT Specialised Electrical Equipment Part No: 1763 281 APT Senders, Switches and Probes Temperature (Nason) Nason temperature switches are used in many pneumatic and hydraulic systems. Typical applications include marine, agricultural, construction, earthmoving, industrial and mining equipment. Normal operational life of Nason switches is in excess of one million cycles. • Temperature and pressure switches • Available media connections 1/8 NPT - 1/2 NPT • A unique variety of electrical contact arrangements • Snap action switching • Pressure switches incorporate elastomeric diaphragms Part No: 6027 Part No: 2040 Part No: 4958 Description: TEMPERATURE SWITCH 210°F 2 TERMINAL 3/8 NPT WEATHERPACK PLUG - NASON # TM-2A-210R/WP Description: TEMPERATURE SWITCH 212°F 3 TERMINAL 3/8 NPT - NASON # HT-2C-212R Description: TEMPERATURE SWITCH 212°F 4 TERMINAL 3/8 NPT - NASON # TC250-212-4T Part No: 9383 Part No: 6823 Part No: 4983 Description: TEMPERATURE SWITCH 220°F 4 TERMINAL 1/2 NPT - NASON # TC150-220-4T Description: TEMPERATURE SWITCH 220°F 4 TERMINAL 3/8 NPT - NASON # TC250-220-4T Description: TEMPERATURE SWITCH 250°F 4 TERMINAL 3/8 NPT - NASON # TC250-250R-4T . Specialised Electrical Equipment APT 282 Senders, Switches and Probes Vacuum The AusProTec™ range of vacuum switches offer reliability and can be used in designs that accommodate 1" to 30" of vacuum. Construction of the vacuum switches is consistent with our pressure switches utilising a long-life elastomer diaphragm that engages a snap-action design micro-switch for consistent and accurate operation. You can order your switch with a factory pre-set or make it field adjustable - depending on your design requirement. Part No: 2388 Part No: 1244 Part No: 4367 Description: VACUUM SWITCH SET TO 25" WATER 1/8NPT FEMALE THREAD Description: ADAPTOR 1/8NPT MALE TO 1/8NPT MALE Description: VACUUM SWITCH ADJUSTABLE BETWEEN 14 - 70" WATER 1/8NPE MALE THREAD Solenoids Air Solenoids Part No: 4688 Part No: 6910 Part No: 3829 Description: AIR SOLENOID VALVE 12V 2 PORT NORMALLY CLOSED Description: AIR SOLENOID VALVE 12V 3 PORT NORMALLY OPEN Description: AIR SOLENOID VALVE 24V 2 PORT NORMALLY CLOSED Part No: 1344 Part No: 9071 Description: AIR SOLENOID VALVE 24V 3 PORT NORMALLY OPEN Description: AIR SOLENOID VALVE 24V 3 PORT NORMALLY OPEN - DIN PLUG 283 Specialised Electrical Equipment The AusProTec™ range of air solenoids has been compiled to suit your desired application.For further information, please contact your nearest RCT branch. APT Solenoids Continuous Duty, Slave and Heavy Duty Solenoids The AusProTec™ range of continuous duty, slave and heavy duty solenoids has been compiled to suit your desired application. For further information, please contact your nearest RCT branch. Part No: 0282 Part No: 2668 Part No: 9664 Description: CONTINUOUS DUTY SOLENOID 12V 85 AMP - COLE HERSEE # 24117 Description: CONTINUOUS DUTY SOLENOID 12V UNIVERSAL Description: CONTINUOUS DUTY SOLENOID 24V 70 AMP Part No: 3077 Part No: 7923 Part No: 9727 Description: CONTINUOUS DUTY SOLENOID 24V 85 AMP - COLE HERSEE # 24063-06 Description: SOLENOID HEAVY DUTY 24V 255 AMP - COLE HERSEE # 24824-01B Description: START SLAVE SOLENOID 12V Part No: 2445 Description: START SLAVE SOLENOID 24V Specialised Electrical Equipment APT 284 Solenoids Dual Battery Solenoids This 12v dual battery isolator provides a cost effective and easy to install solution to complement your dual battery system. Part No: 3602 Description: DUAL BATTERY SOLENOID 12V 100 AMP Solenoids Fuel Pump RCT stocks a large range of fuel pumps to suit a range of applications. For further technical information please contact your nearest RCT branch. Part No: 6093 Specialised Electrical Equipment Description: FUEL PUMP 24V MARINE GRADE 285 APT Solenoids Syncrostart (Woodward) and Fittings Syncrostart (Woodward) DC solenoids are used to operate run/stop levers, throttles, valves and clutches on a variety of machines. Available in 12 or 24v with a maximum hold rate of 178 newtons, each unit is internally switched within a permanently sealed body. Each unit has a 25mm stroke and is suited for universal application. Part No: 2113 Part No: 7750 Part No: 2111 Description: SHUTDOWN SOLENOID 12V 11lb PULL - 1502 SERIES Description: SHUTDOWN SOLENOID 12V 21lb PULL - 2003SERIES Description: SHUTDOWN SOLENOID 24V 11lb PULL - 1502 SERIES Part No: 7690 Part No: 3790 Part No: 3387 Description: SHUTDOWN SOLENOID 24V 21lb PULL - 2003 SERIES Description: SOLENOID SHUTDOWN KIT TO SUIT DUTZ ENGINE 12V Description: SOLENOID SHUTDOWN KIT TO SUIT DUTZ ENGINE 24V Part No: 8184 Part No: 7259 Description: ADAPTOR TONGUE 1/4 UNF Description: BALL END 90 DEGREE 1/4 UNF Part No: 6377 Specialised Electrical Equipment Description: THREADED ROD 1/4 UNF Part No: 3358 Part No: 9401 Part No: 8185 Description: CLEVIS YOKE 1/4 UNF Description: JOINER 1/4 - 1/4 UNF Description: ROD END 1/4 UNF (ROSE JOINT APT 286 Speedlimiting Speedlimiters (Groeneveld) The electronic vehicle speed limiter maintains control over the vehicle's maximum speed by regulating the cable throttle, while still allowing the operator to use the full power of their vehicle (a securely coded programming device known as “GINA” is required to program the maximum speed of the vehicle). The electronic vehicle speed limiter controls vehicle overspeeding, independently of the operator. With the introduction of stricter regulations regarding workplace safety, vehicle owners are now being encouraged to fit speed limiting devices onto their vehicles. Fitting a speed limiting device ensures that operators comply with the speed limits imposed within the workplace and on public roads. The resulting benefits are noticeable and often immediate. Part No: 4613 Part No: 4612 Part No: 2213 Description: SPEEDLIMITER GROENEVELD 12V WATER PROOF Description: SPEEDLIMITER GROENEVELD 24V Description: PROGRAMMER UNIT TO SUIT SPEEDLIMITERS Switches Emergency Stop Switches Part No: 8918 Part No: 2910 Part No: 3834 Description: EMERGENCY STOP CONTROL - PLASTIC - WITH 1 x NORMALLY CLOSED CONTACT Description: NORMALLY OPEN CONTACT TO SUIT 8918 Description: NORMALLY CLOSED CONTACT TO SUIT 8918 Specialised Electrical Equipment The AusProTec™ range of emergency stop switches has been compiled to cover heavy and light duty situations. Emergency stop switches are used to stop equipment and facilities in emergencies. Part No: 2201 Description: HEAVY DUTY EMERGENCY STOP CONTROL 287 APT Switches Ignition, Start and Push Button Switches RCT stocks a wide range of ignition, start and push button switches to suit all types of electrical applications. For further technical information, please contact your nearest RCT branch. Part No: 7945 Part No: 4506 Part No: 7411 Description: PUSH BUTTON SWITCH SPST NORMALLY CLOSED Description: PUSH BUTTON SWITCH SPST NORMALLY OPEN Description: STARTER SWITCH PUSH BUTTON BLACK HELLA # 4503 Part No: 7410 Part No: 2059 Part No: 5843 Description: STARTER SWITCH PUSH BUTTON WHITE HELLA # 4500 Description: IGNITION SWITCH 3 POSITION OFF - IGNITION - START NON KEY Description: IGNITION SWITCH 4 POSITION OFF - ACCESSORIES IGNITION - START KEY START Specialised Electrical Equipment APT 288 Switches Rocker Switches RCT stocks a wide range of rocker switches to suit all types of electrical applications. For further technical information, please contact your nearest RCT branch. Part No: 4521 Part No: 4199 Part No: 5077 Description: ROCKER SWITCH ON / OFF AMBER COLE HERSEE # 58328-13 Description: ROCKER SWITCH ON / OFF BLACK COLE HERSEE # 58327-01 Description: ROCKER SWITCH ON / OFF BLUE COLE HERSEE # 58328-55 Part No: 5078 Part No: 4520 Description: ROCKER SWITCH ON / OFF GREEN COLE HERSEE # 58328-11 Description: ROCKER SWITCH ON / OFF RED COLE HERSEE # 58328-04 Description: ROCKER SWITCH ON OFF - ON BLACK COLE HERSEE # 58328-36 Specialised Electrical Equipment Part No: 4517 289 APT Switches Toggle Switches, Boots and Covers RCT stocks a wide selection of standard and heavy duty toggle switches. Protective covers are also available in a variety of colours. These covers suit most toggle switches with a 15/32” thread. • Standard and heavy duty • Environmentally sealed • A variety of electrical contact arrangements • Available in ST, DT and momentary configurations Specialised Electrical Equipment Part No: 1642 Part No: 7973 Part No: 7978 Description: TOGGLE SWITCH 2 POSITION 10 AMP 2 TERMINAL SPADE TERMINALS Description: TOGGLE SWITCH 2 POSITION 10 AMP 3 TERMINAL SCREW TERMINALS Description: TOGGLE SWITCH 2 POSITION 10 AMP 3 TERMINAL SPADE TERMINALS Part No: 0113 Part No: 7979 Part No: 2058 Description: TOGGLE SWITCH 2 POSITION DP-ST ON - ON Description: TOGGLE SWITCH 2 POSITION SPRING RETURN 10 AMP 2 TERMINAL - SPADE TERMINALS Description: TOGGLE SWITCH 2 POSITION SP-ST OFF - MOMENTARY ON Part No: 1508 Part No: 2057 Part No: 9554 Description: TOGGLE SWITCH 2 POSITION SP-ST ON - MOMENTARY OFF Description: TOGGLE SWITCH 2 POSITION SP-ST ON - OFF Description: TOGGLE SWITCH 3 POSITION 10 AMP 3 TERMINAL SPADE TERMINALS APT 290 Part No: 1279 Part No: 6171 Description: TOGGLE SWITCH 3 POSITION 10 AMP 6 TERMINAL SCREW TERMINALS Description: TOGGLE SWITCH 3 POSITION 10 AMP 6 TERMINAL SPADE TERMINALS Description: TOGGLE SWITCH 3 POSITION SPRING RETURN 10 AMP 3 TERMINAL - SCREW TERMINALS Part No: 5436 Part No: 3265 Part No: 3266 Description: TOGGLE SWITCH 3 POSITION SPRING RETURN 10 AMP 6 TERMINAL - SCREW TERMINALS Description: TOGGLE SWITCH BOOT BLUE Description: TOGGLE SWITCH BOOT GREEN Part No: 3214 Part No: 3267 Part No: 0327 Description: TOGGLE SWITCH BOOT RED Description: TOGGLE SWITCH BOOT YELLOW Description: TOGGLE SWITCH COVER GREEN 1 POSITION Part No: 0200 Part No: 4930 Part No: 0007 Description: TOGGLE SWITCH COVER RED 1 POSITION Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED DP-DT MOMENTARY ON - OFF MOMENTARY ON Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED DP-DT OFF - ON - MOMENTARY ON Part No: 0415 Part No: 0976 Part No: 1556 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED DP-ST OFF - ON Description: TOGGLE SWITCH BOOT BLACK Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED DP-ST ON - MOMENTARY OFF 291 Specialised Electrical Equipment Part No: 4829 APT Part No: 7567 Part No: 2258 Part No: 7919 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED ON - MOMENTARY OFF - SPADE TERMINALS Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED SP-DT MOMENTARY ON - OFF MOMENTARY OFF Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED SP-DT ON - MOMENTARY OFF Part No: 2257 Part No: 0371 Part No: 0045 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED SP-DT ON - ON Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED SP-DT ON - ON - ON Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED SP-DT ON / OFF / ON Part No: 1336 Description: TOGGLE SWITCH ENVIRONMENTALLY SEALED SPRING RETURN ON - OFF - ON Specialised Electrical Equipment APT 292 Tooling Coaxial Crimp Tools Part No: 5411 Part No: 10277 Description: COAXIAL TERMINATION KIT WITH CASE Description: COAXIAL RATCHET CRIMP TOOL Specialised Electrical Equipment The AusProTec™ Coaxial Termination Kit provides the necessary tools for the termination of all of your coax cables. Including a 6.5” cable cutter and cable stripping tool, the kit is housed in a rugged, foam lined plastic case. 293 APT Durst Tooling MOBILE JUMP STARTERS The Durst range of portable high capacity jump start trolleys is suitable for starting vehicles with low or dead flat batteries in car/truck dealer workshops, panel beaters, bus repairers, mining companies, aviation, defence, councils, TAFE, hire companies, auction yards etc. All models use advanced technology “set & forget” electronic chargers, with long life maintenance free batteries to keep the starter in a full state of readiness. Features include: Australian made, battery isolation switch with voltage selection LED indicator, reverse polarity LED and buzzer, antispike protection, colour coded leads, fully insulated battery clamps, fuse protection in case of short circuit and fully OH&S compliant. A comprehensive range of standard carry and custom built jump starts are available. Compact Jump Start Charger - Part No. 0538 Industrial 12v, 25 amp capacity, 4 position current adjustment switch. Large easy to read amp meter, reverse polarity protected. Heavy duty cable, complete with insulated clamps. Fully protected on primary and secondary. Jump Start Charger - Part No. 0539 350 amp jump start capacity. Industrial 24v, 25 amp capacity, 4 position current adjustment switch. Large easy to read amp meter, reverse polarity protection. Heavy duty cable, complete with insulated clamps. Fully protected transformer on primary and secondary windings with resettable overloads. SMART CHARGERS Durst now offers the fully automatic “set & forget” SMART charging solutions for all automotive, marine, mobile home, electric scooters, golf carts, solar, deep cycle, UPS standby, industrial and commercial applications. Simply connect the battery to the SMART charger and let it auto run the charging program. The user friendly LED display lets you clearly understand the status of the charging mode. You can select the battery type switch for gel (maintenance free) battery or flooded (wet) battery for optimum performance. In the float charging mode, you can select the equalising switch to choose the optimum voltage level for maximum battery life. Digital Battery Tester 12V - Part No. 0550 Enhanced features and digital battery tester with an easy to read digital display. 125-1400 CCA, IEC, EN, BCI and DIN scale. 4 digit display shows CCA's, voltage, good/bad status. Soft carry case. Dedicated Automotive Multimeter - Part No. 0523 Same functions as the MM-68 below with the ADDITIONAL FEATURES of 3 ¾ digit (0-9999 count) LCD display, 40 segment bar graph, milliseconds pulse width, zero (relative readings), max/min key, auto shut off. Fused 20 amp internal shunt. Ideal for EFI applications. Complete with 70 page instruction/training manual. Optional padded dual compartment carry bag (Part No. 0537) Handy Multimeter - Part No. 0534 Specialised Electrical Equipment Fit into the palm of your hand. Auto range or manual selection, AC/DC volts, current, resistance, diode test, continuity, data hold, overload protection on all ranges and analogue bar graph. Inductive Current Clamps For Multimeters - Part No. 0536 • AC/DC current adaptors to cover all automotive and commercial applications. • Range 0-200, 0-1000 amps Soldering Irons 12v DC - Part No. 0554 (70W) Specifically designed for auto and marine applications. Very quick heating, 800°F operating temperature. Ideal for soldering lugs in starter wiring and brushes etc. Large, tapered copper soldering tip. Shaft diameter 6mm, head diameter 12mm. Long, double insulated leads fitted with heavy duty clips for operation from a 12v battery. APT 294 Part No: 0539 Part No: 0543 Description: JUMP START TROLLEY 300A 12V DURST # BC-325-12-T Description: JUMP START TROLLEY 300A 12/24V DURST # BC-325-24-T Description: JUMP START PORTABLE 800CCA 12/24V (HIPPO) DURST # BJC-4800 Part No: 0545 Part No: 0555 Part No: 0550 Description: JUMP START MOBILE 1960CCA 12/24V (SCORPION) DURST # BJC-200 Description: CARBON PILE BATTERY LOAD TESTER 500A DURST # BT-2003F Description: DIGITAL BATTERY TESTER 12V DURST # BT-8300 Part No: 0523 Part No: 0534 Part No: 0536 Description: MULTIMETER DEDICATED AUTOMOTIVE WITH RPM PICKUP DURST # MM-78 Description: MULTIMETER (OKAY) DURST # MM-132 Description: INDUCTIVE CLAMP METER 1000A DURST # MM-CA1000 Part No: 0537 Part No: 0554 Description: PADDED CARRY CASE TO SUIT MULTIMETERS DURST # MM-CC100 Description: SOLDERING IRON 12V 70W DURST # SI-1270 Specialised Electrical Equipment Part No: 0538 295 APT Hand, Crimp and Removal Tooling The AusProTec™ range of specialised tooling has been compiled to assist with the proper installation and maintenance of your auto electrical equipment. For further information please contact your nearest RCT branch. Part No: 9549 Part No: 7272 Part No: 5411 Description: CABLE CUTTERS HEAVY DUTY Description: SIDE CUTTERS 1525MM KNIPEX Description: COAXIAL TERMINATION CRIMP TOOL AND KIT WITH CASE Part No: 7827 Part No: 9881 Description: COAXIAL RATCHET CRIMP TOOL Description: CRIMP TOOL TO SUIT INSULATED & NON INSULATED TERMINALS - HELLA # 8272 Description: CRIMP TOOL TO SUIT INSULATED TERMINALS RATCHET Part No: 2639 Part No: 6022 Part No: 8892 Description: CRIMP TOOL TO SUIT UN-INSULATED & FLAG TERMINALS - UTILUX # 147A Description: DEUTSCH CRIMP TOOL TO SUIT #20 CONTACTS Description: DEUTSCH CRIMP TOOL TO SUIT 4MM CONTACTS #16 Part No: 10277 Specialised Electrical Equipment APT 296 Part No: 6135 Part No: 0754 Part No: 9945 Description: INSERTION TOOL TO SUIT HEAVY DUTY DEUTSCH CONECTORS Description: REMOVAL TOOL TO SUIT #12 CONTACTS - YELLOW Description: REMOVAL TOOL TO SUIT #14 CONTACTS - GREEN Part No: 3177 Part No: 6418 Part No: 0859 Description: REMOVAL TOOL TO SUIT #16 CONTACTS - BLUE Description: REMOVAL TOOL TO SUIT #16 CONTACTS - LIGHT BLUE THIN WALLED Description: REMOVAL TOOL TO SUIT #20 CONTACTS - RED Part No: 0735 Part No: 0753 Part No: 8138 Description: REMOVAL TOOL TO SUIT #4 CONTACTS - WHITE Description: REMOVAL TOOL TO SUIT #8 CONTACTS - GREEN Description: TRIMMING TOOL TO SUIT COAXIAL CABLE Part No: 11542 Specialised Electrical Equipment Description: COAXIAL STRIPPING TOOL TO SUIT RG8 CABLE (1127) 297 APT Test Equipment Tooling RCT stocks a large range of test equipment for all of your workshop needs, distributing brands such as Durst Australia. Please contact your local RCT branch for more information. Specialised Electrical Equipment Part No: 10330 Part No: 11877 Part No: 0555 Description: HANDHELD OSCILLOSCOPE Description: TEST LIGHT Description: CARBON PILE BATTERY LOAD TESTER 500A DURST # BT-2003F Part No: 0550 Part No: 4590 Part No: 0523 Description: DIGITAL BATTERY TESTER 12V DURST # BT-8300 Description: MULTIMETER COUNT AUTORANGING DMM DIGITECH Description: MULTIMETER DEDICATED AUTOMOTIVE WITH RPM PICKUP DURST # MM-78 Part No: 0534 Part No: 0536 Part No: 0537 Description: MULTIMETER (OKAY) DURST # MM-132 Description: INDUCTIVE CLAMP METER 1000A DURST # MM-CA1000 Description: PADDED CARRY CASE TO SUIT MULTIMETERS DURST # MM-CC100 Part No: 0535 Part No: 0554 Description: CLAMP METER 200 AMP MINI DURST # MM-6052 Description: SOLDERING IRON 12V 70W DURST # SI-1270 APT 298 Tooling Testing and Programming The AusProTec™ range of specialised testing and programming equipment has been compiled to assist with the proper installation and maintenance of RCT proprietary products. Part No: 7599 Part No: 4590 Part No: 2694 Description: CAT STYLE TEST LIGHT Description: MULTIMETER COUNT AUTORANGING DMM DIGITECH Description: USB TO SERIAL ADAPTOR Part No: 2056 Part No: 6530 Description: FREQUENCY GENERATOR Description: POWER / SWR METER Specialised Electrical Equipment For further information, please contact your nearest RCT branch. 299 APT Warning and Reversing Alarms Backup (Preco) A range of Preco equipment including backup alarms, special application sounder and reverse switch. Preco strobe lights can be found under our “Beacons” section of this catalogue. Part No: 4223 Part No: 1461 Part No: 2876 Description: BACKUP ALARM SMALL TYPE 12 / 24VDC 102dB PRECO # 250 Description: BACKUP ALARM ADJUSTABLE 12 / 24VDC 97 / 107 / 112dB PRECO # 112 Description: BACKUP ALARM SELF ADJUSTING 12 / 24VDC 87 - 112dB PRECO # 1040 Part No: 9716 Part No: 6162 Description: BACKUP ALARM SELF ADJUSTING 12 / 24VDC 97 - 112dB 6" MOUNTING HOLES PRECO # 1060 Description: BACKUP ALARM SINGLE SOUND LEVEL 12 / 24VDC 102dB PRECO # FS255 Specialised Electrical Equipment APT 300 Warning and Reversing Alarms Piezo Buzzers Multipurpose Piezo audio indicators are suitable for through or under dash mounting due to their light weight and size. The 1723 has a third terminal that can be connected to obtain an intermittent output. Part No: 6665 Part No: 9655 Description: BUZZER 6 - 28VDC CONSTANT / INTERMITTENT 80dB MIN Description: BUZZER 12 - 24VDC CONSTANT 90dB MIN Description: MOUNTING BRACKET TO SUIT 1723 SINGLE HOLE MOUNT Part No: 6444 Part No: 3551 Description: MOUNTING BRACKET TO SUIT 1723 DUAL HOLE MOUNT Description: BUZZER 3 - 20VDC 88DB MIN LIGHT DUTY Specialised Electrical Equipment Part No: 1723 301 APT Smart Solutions for Smart Operations Increasing Safety and Productivity PERTH Unit 2-5/511 Abernethy Road Kewdale WA 6105 Ph: +61 (0) 8 9353 6577 Fax: +61 (0) 8 9353 6578 BRISBANE Unit 6/26 Flinders Parade North Lakes QLD 4509 Ph: +61 (0) 7 3385 0172 Fax: +61 (0) 7 3385 0173 KALGOORLIE 24 Percy Road Kalgoorlie WA 6430 Ph: +61 (0) 8 9021 1600 Fax: +61 (0) 8 9091 4927 MT ISA 1A Ryan Road Mt Isa QLD 4825 Ph: +61 (0) 7 4749 0233 Fax: +61 (0) 7 4749 0232 MELBOURNE Unit 4 Hallmarc Office Park 15 Ricketts Road Mt Waverley VIC 3149 Ph: +61 (0) 3 9545 5859 Fax: +61 (0) 3 9545 6193 INTERNATIONAL: AFRICA: +27 (0) 83 292 4246 RUSSIA: +7 (985) 870 0041 NORTH AMERICA: +1 (801) 712 6077 www.rct.net.au solutions@rct.net.au Manufactured or distributed by RCT. Copyright © Remote Control Technologies Pty Ltd images for illustrative purposes only.
