146
Ultra-bright surface mount LEDs come with
a flexible heat sink to provide 50,000 hour
average life and can follow any architectural
feature. Power consumption is an average of
82% savings over incandescent. The dimmable,
low voltage LED lamps produce a smooth 140
degree beam spread. Cool to touch, the LEDs
contain no mercury and produce no harmful
UV or IR radiation. Choose from a warm white
3100K, or opt for full-color RGB mixing. System
kits make ordering easy. 3 year warranty.
Visit www.edgelighting.com for configuration
tool.
1 Watt
Per Foot
Warm White
3 Watts
Per Foot
Warm White
L ED S O F T S T R IP
Clean lines of light are now possible using
efficient LED technology. For dramatic cove
lighting, task and accent applications, LED Soft
Strip is an elegant and cost-effective solution.
1 & 3 Watts
Per Foot
RGB
147
soft strip 1 watt 12 volt
Description:
Soft Strip LED is a flexible 1/2" copper strip with a tough 1/8" protective epoxy
resin gel on top. Available in lengths from 1 ft. up to 16 ft., it may be cut every
2 inches. It uses 18 warm white (3000K) LEDs per foot and consumes only 1.4
watts per foot remaining cool to touch. It is easy to install with 3M industrial
strength sticky back tape on the backside or may be secured with screw in
mounting clips (order separately) for non-smooth surfaces. No heat sink needed
but Reflectors available on p. 153.
6 ft. lead wire provided
3M Tape
•
•
•
•
•
•
•
•
•
Highly flexible material may be permanently secured to most surfaces with
3M industrial strength sticky back tape (included).
Screw mounted straps are available for wet locations
Voltage Input: 12VDC Class II
Long life LED: 50,000 hours (no Heat Sink required)
Dims with standard electronic dimmer (0-100%)
1.4 watts, 90 lumens per foot
IP65 (not submersible)
3000K 80 CRI
3 year Warranty
1/8"
12in
23
18in
14
24in
09
36in
04
Shown using 4 foot section of Soft Strip
For complete foot candle chart see p. 153
IES files available at www.edgelighting.com
148
www.edgelighting.com
1/2"

Warm White 140º
Distance Foot Candles
2" to 16'-0"
Applications:
•
•
•
•
•
•
•
Accent (20 foot candle or less) task 20-50FC
Indoor, outdoor and wet location
Under/above cabinet
Accent toe kicks
Behind sheer curtains
Wine cellars
Step or deck lights
Cut in field every 2 inches

Specifications:
SOFT STRIP 1 Watt KITS
SIMPLE KITS
Easy-to-use kits combine everything needed for a complete Soft Strip system. Kits include electronic dimmable power supplies, LED
strips, and mounting tape for attaching to most surfaces.
The 60 watt 12VDC power supply is dimmable with a standard electronic low voltage dimmer for indoor use only (dimmer sold
separately). Soft Strip is rated IP65 for indoor, and outdoor (not submersible). Sold in 1 foot increments. Maximum length before
re-feeding is 16 ft. Comes with low voltage 6 ft. feed end wire. For more intricate applications, make squares, L or T connections, or
to use the kit configuration tool visit www.edgelighting.com
SINGLE RUN (End Feed)
Electronic low voltage dimmer (Sold Separately)
120VAC
TEB-60L-12DC
SS1-12V-12-WW
60W Dimmable power supply
Up to 16 ft. run of warm white Soft Strip
+ 12VDC
-
SS1-CFX
2 #10 AWG
Locate Soft Strip within
20’ of power supply
Ordering
code
Sold separately
SYSTEm
VOLTAGE
Length in feet
SS1
12V
k16
SS1 Soft Strip 1.4W
per ft.
12V 12 Volt
MULTIPLE RUN (Center Feed)
K1 1'
K2 2'
K3 3'
K4 4'
K5 5'
K6 6'
K7 7'
K8 8'
K9 9'
K1010'
color temperature
WW
K11 11'
K12 12'
K13 13'
K14 14'
K15 15'
K16 16'
WW Warm White 3000K 82CRI
SS1-12V-4-WW
Electronic low voltage dimmer (Sold Separately)
120VAC
TEB-60L-12DC
L
60W Dimmable power supply
N
2 #10 AWG
Locate Soft Strip within
20’ of power supply
L
SS1-12V-16-WW
SS1-12V-16-WW
N
Up to 16 ft. run of warm white Soft Strip
12VDC +
-
Ordering
code
Up to 16 ft. run of warm white Soft Strip
+ 12VDC
-
SYSTEm
VOLTAGE
Length in feet
1st run
2nd run
SS1
12V
k16 - 16
SS1 Soft Strip 1.4W per ft.
12V12 Volt
K1 1'
K2 2'
K3 3'
K4 4'
K5 5'
K6 6'
K7 7'
K8 8'
K9 9'
K1010'
K11
K12
K13
K14
K15
K16
color temperature
WW
11'
12'
13'
14'
15'
16'
WW Warm White
3000K 82CRI
Patent Pending
60L
2"
1.5"
Ordering
code
PRODUCT
wATTAGE
TEB
60L
TEB Transformer
electronic with
enclosure box
6.75"
PRODUCT
Ordering
code
SS1-PFE
Power Feed End Connector.
Use as an L to feed as single
Power Feed End Connector
section or as a T to feed
two sections from center.
PRODUCT
SS1-CFX
Ordering
code
SS1-CFX
SS1-CFX
SS1-CST
SS1-CST
Flexible
Connector
Straight
Connector
Connectors link multiple
sections of Soft Strip
together.
Ordering
code
Leave blank
for 120V
60L 60 Watt
12DC 12 volt DC
LED supply
150L 150 Watt
LED supply
SS1-pfe
SS1-PFE
Low voltage transformer uses an Edge
Lighting inverter to create DC power. Use a
standard electronic low voltage wall dimmer.
INPUT VOLTAGE
vOLTAGE
12dc
PRODUCT
Ordering
code
SS-SU
SS-SUStrap
U-Shape
SS-US
PRODUCT
Ordering
code
SS-ST
SS-STStrap Tie
SS-TS
SYSTEm
VOLTAGE
Length in feet
SS1
12V
16
SS1 Soft Strip 1.4W
per ft.
12V 12 Volt
1
2
3
4
5
1’
2’
3’
4’
5’
6
7
8
9
10
6’
7’
8’
9’
10’
LED Soft Strip
SOFT STRIP COMPONENTS
Create a custom Soft Strip system. Build a system of any scale by combining individual runs of up to 16 feet each. Use special
mounting straps when mounting to non smooth surfaces (3M tape provided on back of Soft Strip).
U-Strap for wet location. 30 to a
bag with #6 ½ wood screws. Use
every 6 to 12 inches
Tie Strap hides under Soft Strip with
cable tie. 30 to a bag with #6 ½
wood screws. Use every 6 to 12
inches
color temperature
WW
11
12
13
14
15
16
11’
12’
13’
14’
15’
16’
WW Warm White
3000K 82CRI
www.edgelighting.com
149
soft strip 3 WATT 12 volt
Description:
Soft Strip LED is a flexible 5/8" copper strip with a tough 1/8" protective epoxy resin
gel on top. Available in lengths from 1 ft. up to 16 ft. and may be cut every 2 inches.
Strips can be rejoined using connectors. 18 warm white (3,173K) LEDs per foot
consume only 3.4 watts per foot remaining cool to touch. Easily installed with 3M
industrial strength sticky back tape on the backside or may be secured with screw
in mounting clips (order separately) to non-smooth surfaces. Requires Heat Sink
(Flexible Flat Aluminum Heat Sink included). For Heat Sinks/Reflectors see p. 153.
6 ft. lead wire provided
3M Tape
Specifications:
Highly flexible material may be permanently secured to most
surfaces with 3M industrial strength sticky back tape (included).
Screw mounted straps are available for wet locations
Voltage Input: 12VDC Class II
Long life LED: 50,000 hours. Must be used with Heat Sink
(SS-HR-F Flat version included)
Dims with standard electronic dimmer (0-100%)
3.4 watts, 210 lumens per foot
IP65 (not submersible)
5/8"
1/8"
3,173K 75 CRI
2" to 16'-0"
Warm White 140º
Distance Foot Candles
12in
74
18in
45
24in
32
36in
19
Shown using 4 foot section of Soft Strip.
For complete foot candle chart see p. 153.
IES files available at www.edgelighting.com
150
www.edgelighting.com
Cut in field every 2 inches

2.5" Flexible
Aluminum Heat
Sink (included)

•
•
•
•
•
•
•
•
Applications:
• Indoor, outdoor
• Under/above cabinet, shelving
• Detailed task 50+ FC
•Office work stations
• Cove lighting
•
•
•
•
•
•
Cove lighting
Accent toe kicks (under bench)
Behind sheer curtains
Wine cellars and refrigerators
Step or deck lights
Closets
SS-HR-J-_
J Shaped Heat
Sink Reflector
SOFT STRIP 3 Watt KITS
SIMPLE KITS
Easy-to-use kits combine everything needed for a complete Soft Strip system. Kits include electronic dimmable power supplies, LED
strips, and mounting tape (SS-HR-F) for attaching to most surfaces.
Kits include a 12VDC power supply which is dimmable with a standard electronic low voltage dimmer for indoor use only (dimmer sold
separately). Soft Strip is rated IP65 for indoor and outdoor (not submersible). Sold in 1 foot increments. Maximum length before
re-feeding is 16 ft. Comes with low voltage 6 ft. feed end wire. For more intricate applications, make squares, L or T connections, or
to use the kit configuration tool visit www.edgelighting.com
SINGLE RUN (End Feed)
Up to 13 ft. per home run.
Electronic low voltage dimmer
SS3-12V-12-WW
120VAC
Up to 12 ft. run of warm white Soft Strip
+ 12VDC
TEB-60L-12DC
L
60W Dimmable power supply
N
L
2 #10 AWG
Locate Soft Strip within
20’ of power supply
SS3-CFX
Sold separately
N
6.75"
Ordering
code
SYSTEm
VOLTAGE
SS3
12V
SS3Soft Strip 3W per ft.
MULTIPLE RUN (End Feed)
color temperature
LENGTH IN FEET
WW
k16
K1 1'
K2 2'
K3 3'
K4 4'
K5 5'
12V 12 Volt
Up to 16 ft. per home run.
K6 6'
K7 7'
K8 8'
K9 9'
K10 10'
Electronic low voltage dimmer
K11
K12
K13
K14
K15
K16
11'
12'
13'
14'
15'
16'
120VAC
TEB-150L-12DC
L
SS3-12V-16-WW
Up to 16 ft. run of warm white Soft Strip
+ 12VDC
-
150W Dimmable power supply
N
SS1-12V-4-WW
WW Warm White 3,173K 82CRI
2 #10 AWG
Locate Soft Strip within
20’ of power supply
L
N
SS3-12V-16-WW
Up to 16 ft. run of warm white Soft Strip
+ 12VDC
11"
-
Ordering
code
SYSTEm
VOLTAGE
LENGTH IN FEET
1ST RUN
2ND RUN
SS3
12V
k16 - 16
SS3Soft Strip 3W per ft.
K1
K2
K3
K4
K5
12V 12 Volt
K6 6'
K7 7'
K8 8'
K9 9'
K10 10'
1'
2'
3'
4'
5'
color temperature
WW
K11
K12
K13
K14
K15
K16
11'
12'
13'
14'
15'
16'
WW Warm White 3,173K 82CRI
Create a custom Soft Strip system. Build a system of any scale by combining individual runs of up to 16 feet each. Use special
mounting straps when mounting to non smooth surfaces (3M tape provided on back of Soft Strip).
Patent Pending
60L
2"
1.5"
6.75"
PRODUCT
Ordering
code
SS3-pfe
SS3-PFE Power Feed End Connector
SS3-PFE
PRODUCT
wATTAGE
TEB
60L
TEB Transformer
electronic with
enclosure box
60L 60 Watt
LED supply
150L 150 Watt
LED supply
Ordering
code
Ordering
code
SS3-CFX
SS3-CFX
SS3-CST
SS3-CST
Flexible
Connector
Straight
Connector
Low voltage transformer uses an Edge
Lighting inverter to create DC power. Use a
standard electronic low voltage wall dimmer.
PRODUCT
Power Feed End Connector.
Use as an L to feed as single
section or as a T to feed
two sections from center.
Ordering
code
SS-SU
SS-SUStrap
U-Shape
SS-US
PRODUCT
Ordering
code
Connectors link multiple
sections of Soft Strip
together.
2.5" Flexible Aluminum Heat Sink (included)
Ordering
code
Leave blank
for 120V
12DC 12 volt DC
PRODUCT
SS3-CFX
INPUT VOLTAGE
vOLTAGE
12dc
SS-ST
SYSTEm
VOLTAGE
Length in feet
12V
16
12V 12 Volt
Strap Tie
SS-TS
SS3
SS3 Soft Strip 3.4W per ft.
SS-ST
1
2
3
4
5
1'
2'
3'
4'
5'
6 6'
7 7'
8 8'
9 9'
10 10'
LED Soft Strip
SOFT STRIP COMPONENTS
U-Strap for wet location. 30 to a
bag with #6 ½ wood screws. Use
every 6 to 12 inches
Tie Strap hides under Soft Strip
with cable tie. 30 to a bag with #6
½ wood screws. Use every 6 to
12 inches
color temperature
WW
11
12
13
14
15
16
11'
12'
13'
14'
15'
16'
WW Warm White 3,173K 82CRI
www.edgelighting.com
151
soft strip 3 WATT 24 VOLT
Description:
Soft Strip LED is a flexible 5/8" copper strip with a tough 1/8" protective epoxy
resin gel on top. Available in lengths from 1 ft. up to 16 ft. and may be cut every
4 inches. Strips can be rejoined using connectors. 25 ft runs on 24V before refeeding. 18 warm white (3,150K) LEDs per foot consume only 3.5 watts per foot
remaining cool to touch. Easily installed with 3M industrial strength sticky back
tape on the backside or may be secured with screw in mounting clips (order
separately) to non-smooth surfaces. Requires Heat Sink (Flexible Flat Aluminum
Heat Sink included). For Heat Sinks/Reflectors see p. 153.
Specifications:
• Highly flexible material may be permanently secured to most
surfaces with 3M industrial strength sticky back tape (included)
• Screw mounted straps are available
• Voltage Input: 24VDC
• Long life LED: 50,000 hours. Must be used with Heat Sink
(SS-HR-F Flat version included)
• Dims with standard 0-10V controller (10-100% dimming)
• 3.5 watts, 230 lumens per foot
• Damp or dry locations
• 3,150K 78 CRI
5/8"
• 3 Year Warranty with Heat Sink (provided) 1/8"
4" to 25'-0"
SINGLE RUN KIT


2.5" Flexible
Aluminum Heat
Sink (included)
Cut in field every 4 inches
0-10 volt dimmer (sold separately)
SS3-24V-25-WW
120VAC Lightolier: ZP600FAM120
0-10V controller
1
PSB-100W-010-24VDC
L
L
N
2
100W Dimmable power supply
3
4
N
A B
Up to 25 ft. run of warm white Soft Strip
24VDC
+
-
5
6
2.5” Flexible Aluminum Heat Sink (included)
7
8
2 #10 AWG
CLocate
D E
Soft Strip within
20’ of power supply
dimmer
speed
color
SELECT
SYSTEm
SS3
Ordering
code
SS3 Soft Strip 3.5W
per ft.
VOLTAGE
Length in feet
24V
color temperature
WW
k25
24V 24 Volt
K1 1'
K2 2'
K3 3'
K4 4'
K5 5'
K6 6'
K7 7'
K8 8'
Purple/grey control wires
K9
K10
K11
K12
K13
K14
K15
K16
9'
10'
11'
12'
13'
14'
15'
16'
K17 17'
K18 18'
K19 19'
K20 20'
K21 21'
K22 22'
K23 23'
K24 24'
K25 25'
WW Warm White 3000K 82CRI
SOFT STRIP 24 Volt COMPONENTS
10"
2.5" Flexible Aluminum Heat Sink (included)
6"
Patent Pending
PRODUCT
dimming
wATTAGE
PSB
100W
PSB Power supply with
enclosure box
100W 100 Watts
200W 200 Watts
(center feed only)
010
010
0-10 volt
dimming
VOLTAGE
24VDC
24VDC 24 volt DC
Applications:
• Indoor
• Under/above cabinet
• Cove lighting
•Office work stations
• Food areas
•
•
•
•
•
Accent toe kicks
Behind sheer curtains
Wine cellars
Step accent
Display lighting
Warm White 140º
Distance Foot Candles
12in
85
18in
55
24in
38
36in
21
Shown using 4 foot section of Soft Strip
For complete foot candle chart see p. 153
IES files available at www.edgelighting.com
152
www.edgelighting.com
SYSTEm
VOLTAGE
SS3
24V
SS3 Soft Strip 3.5W per ft.
24V 24 Volt
color temperature
Length in feet
WW
16
1
2
3
4
5
6
1'
2'
3'
4'
5'
6'
7 7'
8 8'
9 9'
1010'
11 11'
12 12'
1313'
14 14'
15 15'
1616'
17 17'
18 18'
1919'
20 20'
21 21'
2222'
2323'
2424'
2525'
WW Warm White 3000K 82CRI
soft strip application
Cove Lighting
Indirect lighting over cabinets or in architectural coves adds to the drama of an environment. Using cove lighting to increasing the overall
brightness of a space can contribute to the warmth in the design.
Cove Lighting Footcandles on Horizontal and Vertical Planes with White Painted Surfaces
PROD SKU
SPACING
FROM WALL
DESCRIPTION
COVE
HEIGHT
*Calculated with 4 ft section of Soft Strip
FC on vertical
plane WALL
FC ON
HORIZONTAL
PLANE CEILING
A
W
B
C
D
X
Y
12"
Z
SS1-12V-_-WW
12 volts 1.4 watts per foot
1"
6"
80 108 191 1447
66 64 36 18
SS1-12V-_-WW
12 volts 1.4 watts per foot
1"
9"
43 56
83
150
38 37 30 21
A
SS1-12V-_-WW
12 volts 1.4 watts per foot
1"
12"
33 42
67
114
27 28 25 19
B
SS3-12V-_-WW
12 volts 3.4 watts per foot
1"
6"
157 168 346 716
146 122 73 38
SS3-12V-_-WW
12 volts 3.4 watts per foot
1"
9"
101 140 196 324
92 93 70 49
SS3-12V-_-WW
12 volts 3.4 watts per foot
1"
12"
78 106 163 250
68 68 60 48
SS3-24V-_-WW
24 volts 3.5 watts per foot
1"
6"
240 296 516 993
219 201 118 58
SS3-24V-_-WW
24 volts 3.5 watts per foot
1"
9"
142 184 303 466
121 122 102 69
SS3-24V-_-WW
24 volts 3.5 watts per foot
1"
12"
107 150 230 372
91 92 81 63
Z
Y
X
W
Cove
Height
C
D
Under Cabinets
The small profile of Soft Strip easily conceals under cabinets. Add even illumination to objects on counter tops and back splash with any of
the Soft Strip versions. Eliminate reflected lamp image in stone, high gloss counter tops by using horizontal mounting extrusion SS-HR-I.
Under Cabinet Footcandles on Horizontal and Vertical Planes
PROD SKU
distance to
valance
DESCRIPTION
CABINET TO
COUNTER
A B
*Calculated with 4 ft section of Soft Strip with F. Heat Sink
COVE
.75"
FOOT CANDLES
.75"
C D
SS1-12V-_-WW
12 volts 1.4 watts per foot
1"
15"
13 21 13 11
SS3-12V-_-WW
12 volts 3.4 watts per foot
1"
15"
32 47 34 26
SS3-24V-_-WW
24 volts 3.5 watts per foot
1"
15"
45 67 48 37
SS-RH-L-_
L shaped reflector
and heat sink
Soft Strip
Attaches to heat
sink with 3M tape
(provided)
*When used with Indirect Heat Sink - 30% FC on countertop
Above Cabinets (SS1 or SS3):
UNDER
CABINET
Soft Strip SS4 using 4.4 watts per foot provides indirect lighting for the space. Placing
the fixtures above cabinets allows light to project into the room as well as lighting
objects on display above upper cabinets. Soft Strip provides soft even illumination.
D
15"
A
B
C
LED Soft Strip
Inside Cabinets (SS1 or SS3):
Running Soft Strip along the vertical or horizontal surfaces inside cabinets provides an even
glow for display or effect. Combine with extrusion SS-HR-L for shelf mount applications.
Toe Kick:
Add a unique decorative element to any lower cabinets with the addition of toe kick
lighting. Define the bottom edge of cabinets while accenting the floor. Soft Strip fits
discreetly in minimal toe kick spaces.
Micro Switch
TOE KICK
PRODUCT
Use behind cabinet door. Lights
turn on when door opens.
Ordering
code
SS-msw
SS-MSWMicro
switch
Heat Sink/Reflectors (HR):
Require for all SS3 Soft Strip, Heat Sink/Reflector extrusion channels redirect light where you need and add life to LED by
drawing excess heat away.
.75"
1.5"
1"
.5"
Sticky Back Tape
(provided)
2.5"
.75"
.75"
3.25"
SS-HR-F-_
SS-HR-L-_
SS-HR-I-_
SS-HR-J-_
2.5" Flat Heat Sink Reflector
L Shaped Heat Sink Reflector
Indirect Heat Sink Reflector
(used under cabinets)
J Shaped Heat Sink
Reflector
(use for floor accent)
PRODUCT
Ordering
code
STYLE
SS-HR
I
SS-HR Heat Sink/
Reflector
FFlat
LL Shape
I Indirect
J J Shape
LENGTH
4
Sheet rock wall
fits on or behind
J Shaped Heat
Sink Reflector
4 4'
8 8'
www.edgelighting.com
153
soft strip heat sink reflectors
how to best use soft strip
In the examples below, Soft Strip is used to highlight objects on shelves. Use SS3 for an extra punch of light above and below
cabinets. A flat aluminum heat sink is provided with SS3. Use different Heat Sink Reflectors depending on the application. No heat
sink is necessary when using the SS1.
SS1-WW Soft Strip
SS3-WW Soft Strip
1 watt per foot
3 watts per foot
11Fc
33Fc
SS-HR-L-_
44Fc
95fc
L Shaped Heat
Sink Reflector
(mounted vertically)
11Fc
33Fc
44Fc
95fc
11Fc
33Fc
44Fc
95fc
SS1-WW Soft Strip
SS3-WW Soft Strip
1 watt per foot
3 watts per foot
36Fc
106fc
SS-HR-F-_
30fc
2” Flat Heat
Sink Reflector
(above cabinet)
30fc
114Fc
114Fc
SS-HR-L-_
30fc
L Shaped Heat
Sink Reflector
114Fc
SS-HR-I-_
Indirect Heat
Sink Reflector
(shown with SS3
3 watt per foot)
154
www.edgelighting.com
Indirect Heat Sink Reflector is used to eliminate lamp image on
glossy counter tops. For best results use with SS3.
SOFT STRIP heat sink reflectors
SS3-RGB Soft Strip (highlighting ceiling)
SS1-RGB Soft Strip (highlighting floor)
3 watts per foot
1 watts per foot
SS-HR-F-_
2” Flat Heat Sink
Reflector
(shown in cove
supplied by others)
SS-HR-J-_
J Shaped Heat
Sink Reflector
CLOSET and display LIGHTING
Soft strip proves it’s versatility as an efficient way to light merchandise on display shelves. Use in closets to place light where you
need it most. In the examples below, Soft Strip provides crisp even illumination. The white LED light makes colorful merchandise
stand out.
LED Soft Strip
SS3-WW Soft Strip
SS3-WW Soft Strip
3 watts per foot
3 watts per foot
47Fc
67Fc
SS-HR-L-_
L Shaped Heat
Sink Reflector
67Fc
www.edgelighting.com
155
soft strip RGB 1 & 3 WATT 12 VOLT
Description:
Soft Strip RGB LED is a flexible 5/8" copper strip with a 1/8" protective epoxy
resin gel on top. Available in lengths from 1 ft up to 16 ft, SS1 may be cut every 4
inches or SS3 every 2 inches. SS1 RGB uses 18 RGB LEDs per foot and consumes
only 1.5 watts per foot. SS3 RGB uses 18 RGB LEDs per foot and consumes only
2.6 watts per foot. Install easily with industrial strength 3M sticky back tape on
the backside (provided) or may be secured with screw in mounting clips (order
separately) to non-smooth surfaces. Requires Heat Sink (Flexible Aluminum Heat
Sink included). For Heat Sinks/Reflectors see p. 153. Works with a 12VDC power
supply in combination with an RGB control module. Can be controlled with any DMX
compatible controller or set to run in stand alone mode. Rated for indoor or outdoor
use (not submersible) IP65. Maximum Length before re-feeding 16 ft, comes with
low voltage 6 ft lead wire.
6 ft. lead wire provided
3M Tape

• Highly flexible material may be permanently secured to most
surfaces with 3M industrial strength sticky back tape (included)
• Screw mounted straps are available
• Voltage Input: 24VDC
2" or 4" to 16'-0"
• Long life LED: 50,000 hours. Must be used with Heat Sink
(SS-HR-F Flat Flexible Aluminium version included)
5/8"
• Dims with standard 0-10V controller
1/8"
(10-100% dimming)
Cut SS1 in field every 4 inches
Cut SS3 in field every 2 inches
• SS1 at 1.5 watts or SS3 at 2.6 watts per foot
• IP65 (not submersible)
Applications Accent:
• 9 RGB LEDs per foot for SS1
• Step or deck lights
• Indoor, outdoor and wet
• 18 RGB LEDs per foot for SS3
• Entertainment
location (not submersible)
• IES files available at www.edgelighting.com
• Display
• Under/above cabinet
• 3 Year Warranty with Heat Sink (provided)
• Water effects
• Cove lighting
• Night clubs
• Accent toe kicks
• Molding accent
• Behind sheer curtains
• Media Room
• Wine cellars
156
www.edgelighting.com
2.5" Flexible
Aluminum Heat
Sink (included)

Specifications:
SOFT STRIP RGB KITS
SIMPLE KITS
Easy-to-use kits combine everything needed for a complete Soft Strip RGB system. For SS1 use one or two strips totaling up to
32 feet. For SS3 use on or two strips totaling up to 16 feet. Kit includes power supply, DMX interface LED driver, LED strips, and
mounting tape for attaching to smooth surfaces. To make squares, L or T connections, send drawings to info@edeglighting.com.
Kits include a 60 watt 12VDC power supply for SS1 or 100W for SS3 with an LED driver which can be controlled either with an
external DMX signal or as a stand alone devise. Rated IP65 for indoor, outdoor and wet location (not submersible). Sold in 1 foot
increments. Maximum length before re-feeding is 16 ft. Comes with low voltage 6 ft. feed end wire.
WALL MOUNTED DMX CONTROLLER (user programmable)
120VAC
CDP
PSB-100W-12VDC
Wall mounted DMX
dial controller
(use 2 gang box)
100W 12VDC power supply
L
7
DVR-RGB-60
4
Low Voltage
PowerSupply
(provided)
CDP Color Dial
16 ft. run of RGB Soft Strip
12VDC
6
3
N
SS1-12V-16-RGB
5
1
2
4 #10 AWG
Locate Soft Strip within
20’ of power supply
8
DMX interface LED driver
A B C D E
12VDC
dimmer
speed
color
SELECT
SS1-12V-16-RGB
16 ft. run of RGB Soft Strip
12VDC
DMX DATA
For more information about controller
options visit www.edgelighting.com
SYSTEm
SS1Soft Strip
1.5W per ft.
SS3Soft Strip
2.6W per ft.
WALL MOUNTED DMX CONTROLLER
Length in feet
1st run
2nd run
SYSTEm
VOLTAGE
SS1
Ordering
code
cDP
12V
12V 12 Volt
CTP
CDP
K1
K2
K3
K4
K5
K6
1'
2'
3'
4'
5'
6'
K7 7'
K8 8'
K9 9'
K1010'
K1111'
K1212'
K1313'
K1414'
K1515'
K1616'
SS3-12V-16-RGB
120VAC
5
1
3
L
7
4
N
16 ft. run of RGB Soft Strip
12VDC
6
2
DVR-RGB-200
8
A B C D E
dimmer
speed
color
Low Voltage
PowerSupply
(provided)
12VDC
SELECT
4 #10 AWG
Locate Soft Strip within
20’ of power supply
DMX interface LED driver
SS3-12V-16-RGB
16 ft. run of RGB Soft Strip
12VDC
DMX DATA
For more information about controller options
visit www.edgelighting.com
5”
RGB Red, Green and
Blue
100W 12VDC power supply
Wall mounted DMX
touch controller
6.6”
rgb
k16-16
Touch screen controller
with power supply
Color dial controller
with power supply
PSB-100W-12VDC
CTP
color temperature
CTP Touch Screen
Ordering
code
SYSTEm
VOLTAGE
SYSTEm
Length in feet
1st run
2nd run
SS3
12V
cTP
k16-16
CTP
CDP
12V 12 Volt
Touch screen controller
with power supply
Color dial controller
with power supply
K1
K2
K3
K4
K5
K6
1'
2'
3'
4'
5'
6'
K7 7'
K8 8’
K9 9'
K10 10'
K11 11'
K12 12'
K13 13'
K14 14'
K15 15'
K16 16'
rgb
RGB Red, Green
and Blue
SOFT STRIP COMPONENTS
Create a custom Soft Strip system. Build a system of any scale by combining individual runs of up to 16 feet each. Use special
mounting straps for wet locations or when mounting to a non smooth surfaces (3M tape provided on back of Soft Strip).
10"
6"
Ordering
code
PRODUCT
wATTAGE
VOLTAGE
PSB
100W
12VDC
PSB Power supply with
enclosure box
Patent Pending
100W 100 Watts
200W 200 Watts
PRODUCT
DVR
Ordering
code
RGB
RGB
DVR Driver for LEDs
PRODUCT
Ordering
code
12VDC 12 volt DC
mODE
RGB DMX three channel control
SS-ST
60
PRODUCT
Ordering
code
Ordering
code
SS-SU
SYSTEm
VOLTAGE
Length in feet
SS1
12V
16
SS1Soft Strip
1.5W per ft.
SS3Soft Strip
2.6W per ft.
For L and T turns send drawing with lengths specified to info@edeglighting.com
SS-SU
SS-US
Touch screen controller
with power supply
Color dial controller
with power supply
2.5" Flexible Aluminum Heat Sink (included).
Strap Tie
60 60 watt max
200 200 watt max
cTP
CTP
CDP
SS-ST
SS-ST
wattage
controller type
Ordering
code
LED Soft Strip
SS1Soft Strip
1.5W per ft.
SS3Soft Strip
2.6W per ft.
color temperature
12V 12 Volt
1
2
3
4
5
6
1'
2'
3'
4'
5'
6'
7
8
9
10
11
12
7'
8’
9'
10'
11'
12'
Strap
U-Shape
color temperature
rgb
13
14
15
16
13'
14'
15'
16'
RGB Red, Green
and Blue
www.edgelighting.com
157