DOES YOUR DEVICE FIT IN OUR 10 SLOT BASKETS? CHECK IT HERE. TEMPLATE A - WITH FOAM. 20 mm or 0.78 inches To ensure accurate measurements, please print to scale and on a Ledger size page (portrait). STEP 1 - Check the device thickness Check the thickness of your device here. If the device thickness fits within the boundaries of this shape, then you are almost there. Move on to STEP 2. If it doesn’t fit, remove the foam insert and measure using TEMPLATE B. STEP 2 - Check the device dimensions Place your device here. If the device fits within the black boundaries of this shape, proceed to Step 3. 256 mm or 10.07 inches If it doesn’t fit, remove the foam insert and measure using TEMPLATE B. STEP 3 - Check device charging point Ensure that the charging point is above the dashed line. If it does, then you are good to go. www.lockncharge.com PLEASE NOTE: It is your responsibility to ensure you measure your device correctly. If you are planning to use a case with your device, ensure you have it on whilst checking the compatibility. If the device is too thick with the case installed, but fits with the STEP 2 and 3, there is one more option and that is to remove the foam insert from the basket and measure using TEMPLATE B. If you are still unsure, contact LocknCharge. 202 mm or 7.95 inches DOES YOUR DEVICE FIT IN OUR 10 SLOT BASKETS? CHECK IT HERE. TEMPLATE B - REMOVE FOAM. THIS OPTION IS RECOMMENDED IF YOU ARE STORING DEVICES WITH LARGER CASES. 28 mm or 1.1 inches To ensure accurate measurements, please print to scale and on a Ledger size page (portrait). STEP 1 - Check the device thickness Remove the two foam blocks from the aluminum baskets. In order to fit 10 devices in this basket, each device must be a maximum of 28 mm or 1.1 inches thick. Place your device here. If the device fits within the black boundaries, go to STEP 2. 268 mm or 10.55 inches STEP 2 - Check the device dimensions Place your device here. If the device fits within the black boundaries of this shape, proceed to Step 3. STEP 3 - Check device charging point Ensure that the charging point is above the dashed line. If it does, then you are good to go. www.lockncharge.com PLEASE NOTE: It is your responsibility to ensure you measure your device correctly. If you are still unsure, contact LocknCharge. 217 mm or 8.54 inches