Light Globe 300
lamps
Light source: incadescent
discharge lamps
DESCRIPTION
Serie GN300 + SSS X YY ZZ
Mounting: post-top
DRAWINGS AND TECHNICAL INFORMATIONS
Ø 300
Dimensions - Area exposed to wind pressure - Weight
Height
330 mm
Technical sheet
Rev. A 01-2016
Measures in mm
Width
Lenght
Diameter
300 mm
Area esposed to wind (S)
0.070 m2
Weight
3.0 Kg
Voltage
230V
Frequency
50Hz
IP
23
Insulation class
CL I
Cos ϕ
-
Oper. Temp. °C
-30... +40
330
Electrical characteristics (electromagnetic wiring)
Conformity
2014/35/UE
(LVD)
2014/30/UE
(EMC)
2011/65/UE
(RoHS)
(ErP)
Mounting system
- Suitable for post-top mounting.
- Cast iron support with a hole (28 mm) at the centre for mounting to the support.
Ø 28 mm
Front-side view
Materials
- Cast iron (UNI EN 1561).
- Sheet in galvanized steel.
- Acrylic screen.
- Screws in stainless steel.
Structure - Main components
- Cup shaped support in cast iron decorated with 10 leaves, equipped with three lateral screws (M6 inox) for tighten the globe in acrylic.
- Circular plate inside, with function of reflector and heat-shield for the screen.
- Screen globe in acrylic. Shock resistance IK06.
Pian view
Optics
- Reflector mod. 0 - lighting for mixed areas - roto-symmetrical.
Operations and maintenance
- To access to wiring and optic compartment, loosen the three lateral screws on the support in cast iron and lift the screen.
- Periodic maintenance (about once a year) for external cleaning of the structure and screen from dust and smog, and the control of fastening of all screws, must be performed with light fixture switched off and cold.
Painting
- Standard color is metalized matt dark gray, type Neri.
- Other colours of RAL range on request.
- Information about paint steps used on this product in specific technical sheet.
Decoration detail of the support in cast iron
Code construction
To configure the complete code of luminaire, add in sequence after Serie code, the others parts of code: Ballast-screen (SSS) + Optic (X) + Lamp predisposition (YY) +
Wiring type (ZZ). See configurations tables on the following page.
Property of Neri S.p.A. - Any use and reproduction for personal purposes is prohibited. Company shall reserve the right at any time to modify the specification or features without notice.
Cod. - - - - - SSS X YY ZZ
Light Globe 300
Screen - Optics - Wirings
Discharge lamps source
CONFIGURATION WITH ELECTROMAGNETIC WIRINGS
Technical sheet
Rev. A 01-2016
CONFIGURATION WITH ELECTRONIC WIRINGS
Screens
Cod. SSS
G10
Light fixture series
Globe 300
Materials
Acrylic
Finiture Shock R.
Opale-white IK06
Optics
Cod. X
Reflector mod.
Lighting classes
0
mod. 0
Lighting of mixed areas
- Reflector mod. 0: lamp in view and globe white-opale finish.
- Height of installation from: 2.5 - 3.5 meters.
Class IES
No cut-off
Wirings (Predisposition for lamps with optical and lampholder)
Cod. YY
Lamps predisposition
W
Optics
01
(INC) Incandescent
≤100
0
- Ceramic lamp holders.
- Terminal board for cables with max section of 2,5 mm2.
Lampholders
E27
Wirings (characteristics)
Cod. ZZ
01
Description
CL I (insulation class)
Note
- Can be installed fluorescent lamps max. 25W, compatible in size to the incandescent lamps.
PHOTOMETRICS OF REFERENCE
Reflector mod. 0 - White-opale screen.
Roto-symmetric geometry for lighting of mixed areas - No cut off - Type V
Gamma angles
180
120
-6m
-4m
-2m
0
2m
4m
6m
Sidewalk
105
105
90
90
75
75
60
60
45
45
4m
2m
0
-2m
-4m
Street
30
15
0
15
30
-6m
Property of Neri S.p.A. - Any use and reproduction for personal purposes is prohibited. Company shall reserve the right at any time to modify the specification or features without notice.