HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100 Series Digital Infrared Language Distribution System
3.2
HCS-5100M Series Digital Infrared Transmitters
3.3
HCS-5100MA/04
4 CHs Digital Infrared Transmitter (with 6-pin connector, compatible with HCS-4100M/20)
3.3
HCS-5100MA/08
8 CHs Digital Infrared Transmitter (with 6-pin connector, compatible with HCS-4100M/20)
3.5
HCS-5100MB/04
4 CHs Digital Infrared Transmitter (with 25-pin connector, compatible with HCS-850PB/10)
3.8
HCS-5100MB/08
8 CHs Digital Infrared Transmitter (with 25-pin connector, compatible with HCS-850PB/10)
3.10
HCS-5100MB/16
16 CHs Digital Infrared Transmitter (with 25-pin connector, compatible with HCS-850PB/10)
3.12
HCS-5100MC/04
4 CHs Digital Infrared Transmitter
3.15
HCS-5100MC/08
8 CHs Digital Infrared Transmitter
3.17
HCS-5100MC/16
16 CHs Digital Infrared Transmitter
3.19
3.22
HCS-5100T Series Digital Infrared Radiators
HCS-5100T/15
Multi-channel Digital Infrared Radiator (15 W)
3.22
HCS-5100T/25
Multi-channel Digital Infrared Radiator (25 W)
3.23
HCS-5100T/35
Multi-channel Digital Infrared Radiator (35 W)
3.24
HCS-5100TBZJ
Wall-mounting Bracket
3.25
3.26
HCS-5100R Series Digital infrared Receivers
HCS-5100R/04
4 CHs Digital Infrared Receiver
(LCD, language display, optional rechargeable battery pack or 2xAA alkaline cells)
HCS-5100R/08
8 CHs Digital Infrared Receiver
(LCD, language display, optional rechargeable battery pack or 2xAA alkaline cells)
HCS-5100R/16
3.26
16 CHs Digital Infrared Receiver
(LCD, language display, optional rechargeable battery pack or 2xAA alkaline cells)
HCS-5100R/32
3.26
3.26
32 CHs Digital Infrared Receiver
(LCD, language display, optional rechargeable battery pack or 2xAA alkaline cells)
3.26
HCS-5100RA/04
4 CHs Digital Infrared Receiver (LCD, language display, 2xAA alkaline cells)
3.28
HCS-5100RA/08
8 CHs Digital Infrared Receiver (LCD, language display, 2xAA alkaline cells)
3.28
HCS-5100RA/16
16 CHs Digital Infrared Receiver (LCD, language display, 2xAA alkaline cells)
3.28
HCS-5100RA/32
32 CHs Digital Infrared Receiver (LCD, language display, 2xAA alkaline cells)
3.28
3.30
Accessories
HCS-5100CHG
IR Receiver Charging Case (48 pcs/case)
3.30
HCS-5100KS
IR Receiver Storage Case (100 pcs/case)
3.30
HCS-5100PA
Headphone
3.31
EP-820AS
Single Earphone
3.31
EP-820BS
Single Earphone
3.31
EP-920BS
Inner Earphone
3.31
HCS-5100BAT
Ni-MH Rechargeable Battery Pack
3.32
RG-58
Coaxial-cable
3.32
BNC Connector
BNC Connector
3.32
HCS-836
Burglarproof Detection System (for IR Receiver)
3.33
HCS-851A/02
Interpreter Booth (accommodates 2 interpreters)
3.33
HCS-851A/03
Interpreter Booth (accommodates 3 interpreters)
3.33
3.1
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100 Series Digital Infrared Language Distribution System
After the launch of HCS-4100 fully digital conference system, TAIDEN has now enhanced its existing product lines with HCS-5100 digital
Infrared language distribution system. This system adopts TAIDEN independent intellectual property chipset and is compliant to international
standard for digital IR systems, providing superb sound quality. HCS-5100 system also features complete language name display, 270° super
wide reception angle and transmitter combination mode, making it the world's most advanced IR language distribution system.
Interpretations will always arrive in perfect condition, as the digital infrared language distribution system integrates seamlessly TAIDEN
HCS-4100M/20 fully digital conference system and simultaneous interpretation unit.
Fully Certificated, Comprehensive Compatibility
HCS-5100 series is compliant to IEC 61603-7 and IEC 60914，moreover, compatible with any other IR system compliant to IEC 61603-7.
IEC 61603: Transmission of audio and/or video and related signals using infrared radiation
IEC 61603-Part 7: Digital audio signals for conference and similar applications
IEC 60914: Conference systems - Electrical and audio requirements
Features
■
Compliant to IEC 61603-7 and IEC 60914
■
Compatible with any other IR system compliant to IEC 61603-7
■
Capable of distributing a maximum of 4, 8, 16 or 32 audio
channels
■
Immune to interference from HF-driven lighting
■
Flexible configuration of channels and channel quality modes
■
LCD receiver display shows channel number and complete
language name
■
Automatic synchronization: number of available channels is the
same as number of channels in use by the system
■
270° super wide reception angle
■
Works without errors, even in bright sunlight
■
Combination mode
■
Bypass mode, used for signal distribution to multiple rooms
■
Delay compensation for cable transmission
■
Audio frequency response: 20 Hz ~ 20 kHz (Perfect mode),
■
Freedom of movement within the range of IR power radiator
weighted S/N >80 dBA
■
Conference privacy is guaranteed as infrared signals do not
pass through opaque walls or ceilings
■
The infrared communication frees users from worries about
eavesdropping and radio interference inherent to radio
wave-based wireless communications
3.2
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100MA/04
4 CHs Digital Infrared Transmitter
The transmitter is the heart of HCS-5100 system. HCS-5100MA/04
accepts and modulates up to 4 unbalanced audio signals onto
carrier waves which are transmitted to radiators located in the room.
It can either be connected to HCS-4100/20 conference main unit
directly, or be used as a stand-alone system for distributing external
audio signals. HCS-5100MA/04 is suitable for either tabletop or
19-inch rack mounting using. Four feet (for tabletop) and two
brackets (for rack mounting) are supplied.
Features
Controls and Indicators
■
Compliant to IEC 61603-7 and IEC 60914
■
256×32 LCD can display the status of the transmitter and the
■
Compatible with any other IR simultaneous interpretation
system compliant to IEC 61603-7
■
Four buttons for configuration
menu of system configuration
■
DQPSK digital modulation/demodulation technology
■
Power switch with indicator (red)
■
Capable of distributing a maximum of 4 audio channels
■
Monitor channel select knob
■
Conference hall privacy; the congress venue itself acts as a
■
Monitor volume control knob
barrier to infrared signals escaping and being overheard, as
■
Mini IR radiators
infrared is unable to pass through opaque objects such as
walls
■
■
Suitable for various kinds (small/medium/large international) of
Interconnections
conference halls and outdoor venues
■
Ø 3.5 mm jack for stereo monitor earphone
eliminates
■
4 BNC connectors for output HF signal to radiator. To each
Each audio channel can be assigned a language name for
■
1 BNC connector for receiving HF signal from other transmitter
easy identification
■
Ethernet and RS-232 ports for connection to computer
Flexible configuration of channels and channel quality modes:
■
Emergency signal interface: when the public emergency
Transmitting
in
2~8
MHz
frequency
band
disturbance from high frequency lighting systems
■
■
connector, up to 30 radiators can be connected
™ Mono, standard quality, maximum 4 channels
system is active, alarm signal can be fed to all channels
™ Mono, perfect quality, maximum 2 channels
automatically
™ Stereo, standard quality, maximum 2 channels
■
Digital audio output (6P-DIN) connector for connecting to
■
Digital audio input (6P-DIN) connector for connecting to
■
Audio signal output connectors for output DCS multi-channel
■
4 audio signal input connectors to connect external unbalanced
■
2 female XLR connectors for external audio inputs to connect
™ Stereo, perfect quality, maximum 1 channels
■
HCS-4100/20 series conference units
Adjustable sensitivity for each input to enable fine tuning of
audio levels
■
HCS-4100/20 series main unit directly
Automatic synchronization to the number of channels in use by
the system
■
audio
“Bypass” mode for distribution of signals from another
transmitter allows multiple rooms to be used
■
audio input signals
Combination mode: two N channel IR transmitters can be
incorporated to make up a 2N channel system, at most 8
auxiliary balanced audio signals such as music, floor language
channels
■
or emergency audio signal
During adjournment, music mode can be used to feed music to
■
all channels
■
Independent test facility: self-generates diverse frequencies for
system debugging
■
Built-in infrared emitters in transmitter for audio monitoring in
operating room
■
With
digital
audio
input
connector
for
connecting
to
HCS-4100/20 series main unit directly, moreover, with 4
interpretation output channels for recording
■
Universal mains power facility allows use worldwide
3.3
Extension interface
HCS-5100 Series Digital Infrared Language Distribution System
Technical Specifications
System Specifications
Modulation
DQPSK, according to IEC 61603-7
Modulation frequency
2 to 6 MHz, according to IEC 61603-7
Carriers 0 to 5
up to 8 MHz
Carriers 6 and 7
20 Hz to 10 kHz (-3dB) at standard quality;
Frequency response
20 Hz to 20 kHz (-3dB) at perfect quality
<0.05%
THD at 1 kHz
Crosstalk attenuation at 1 kHz
>80 dB
Dynamic range
>80 dB
>80 dBA
Weighted SNR
-12 dBV ~ +12 dBV (adjustable)
Input range
System Environmental Conditions
Transport temperature
-40 ºC ~ +70 ºC
Operating temperature
0 ºC ~ +45 ºC
<95%
Max. relative humidity
Compliant to EN 60065
Safety
EMC emission
Compliant to EN 61000-6-3, EN 55022
EMC immunity
Compliant to EN 61000-4-3
CE, FCC
EMC approvals
Compliant to EN 61000-4-2
Static resistance
Power harmonics
Compliant to EN 61000-3-2
Surge resistance
Compliant to EN 61000-4-5
EFT test
Compliant to EN 61000-4-4
Transient power-off test
Compliant to EN 61000-4-11
Electrical
Unbalanced audio inputs
-12 to +12 dBV nominal
-6 to +18 dBV nominal
Balanced audio inputs
Emergency switch connector
Emergency control input
32 Ohm to 2 kOhm
Headphone output
Nominal 1 Vpp, minimum 10 mVpp, 50 Ohm
HF input
1 Vpp, 6 V DC, 50 Ohm
HF output
Mains voltage
Power consumption
Power consumption (standby)
110 to 260 V, 50 to 60 Hz
Maximum 55 W
29 W
Mechanical
Mounting
Brackets for 19" rack mounting or fixing to a table top;
detachable feet for free-standing use on a table top
Dimensions h x w x d (mm)
99 × 430 × 325
7.5 kg
Weight
White
Color
Ordering Information
HCS-5100MA/04
4 CHs Digital Infrared Transmitter
(with 6-pin connector, compatible with HCS-4100M/20)
3.4
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100MA/08
8 CHs Digital Infrared Transmitter
The transmitter is the heart of HCS-5100 system. HCS-5100MA/08
accepts and modulates up to 8 unbalanced audio signals onto
carrier waves which are transmitted to radiators located in the room.
It can either be connected to HCS-4100/20 conference main unit
directly, or be used as a stand-alone system for distributing external
audio signals. HCS-5100MA/08 is suitable for either tabletop or
19-inch rack mounting using. Four feet (for tabletop) and two
brackets (for rack mounting) are supplied.
Features
Controls and Indicators
■
Compliant to IEC 61603-7 and IEC 60914
■
256×32 LCD can display the status of the transmitter and the
■
Compatible with any other IR simultaneous interpretation
system compliant to IEC 61603-7
■
Four buttons for configuration
menu of system configuration
■
DQPSK digital modulation/demodulation technology
■
Power switch with indicator (red)
■
Capable of distributing a maximum of 8 audio channels
■
Monitor channel select knob
■
Conference hall privacy; the congress venue itself acts as a
■
Monitor volume control knob
barrier to infrared signals escaping and being overheard, as
■
Mini IR radiators
infrared is unable to pass through opaque objects such as
walls
■
■
Suitable for various kinds (small/medium/large international) of
Interconnections
conference halls and outdoor venues
■
Ø 3.5 mm jack for stereo monitor earphone
eliminates
■
4 BNC connectors for output HF signal to radiator. To each
Each audio channel can be assigned a language name for
■
1 BNC connector for receiving HF signal from other transmitter
easy identification
■
Ethernet and RS-232 ports for connection to computer
Flexible configuration of channels and channel quality modes:
■
Emergency signal interface: when the public emergency
Transmitting
in
2~8
MHz
frequency
band
disturbance from high frequency lighting systems
■
■
connector, up to 30 radiators can be connected
™ Mono, standard quality, maximum 8 channels
system is active, alarm signal can be fed to all channels
™ Mono, perfect quality, maximum 4 channels
automatically
™ Stereo, standard quality, maximum 4 channels
■
Digital audio output (6P-DIN) connector for connecting to
■
Digital audio input (6P-DIN) connector for connecting to
■
Audio signal output connectors for output DCS multi-channel
■
8 audio signal input connectors to connect external unbalanced
■
2 female XLR connectors for external audio inputs to connect
™ Stereo, perfect quality, maximum 2 channels
■
HCS-4100/20 series conference units
Adjustable sensitivity for each input to enable fine tuning of
audio levels
■
HCS-4100/20 series main unit directly
Automatic synchronization to the number of channels in use by
the system
■
audio
“Bypass” mode for distribution of signals from another
transmitter allows multiple rooms to be used
■
audio input signals
Combination mode: two N channel IR transmitters can be
incorporated to make up a 2N channel system, at most 16
auxiliary balanced audio signals such as music, floor language
channels
■
or emergency audio signal
During adjournment, music mode can be used to feed music to
■
all channels
■
Independent test facility: self-generates diverse frequencies for
system debugging
■
Built-in infrared emitters in transmitter for audio monitoring in
operating room
■
With
digital
audio
input
connector
for
connecting
to
HCS-4100/20 series main unit directly, moreover, with 8
interpretation output channels for recording
■
Universal mains power facility allows use worldwide
3.5
Extension interface
HCS-5100 Series Digital Infrared Language Distribution System
Technical Specifications
System Specifications
Modulation
DQPSK, according to IEC 61603-7
Modulation frequency
2 to 6 MHz, according to IEC 61603-7
Carriers 0 to 5
up to 8 MHz
Carriers 6 and 7
20 Hz to 10 kHz (-3dB) at standard quality;
Frequency response
20 Hz to 20 kHz (-3dB) at perfect quality
<0.05%
THD at 1 kHz
Crosstalk attenuation at 1 kHz
>80 dB
Dynamic range
>80 dB
>80 dBA
Weighted SNR
-12 dBV ~ +12 dBV (adjustable)
Input range
System Environmental Conditions
Transport temperature
-40 ºC ~ +70 ºC
Operating temperature
0 ºC ~ +45 ºC
<95%
Max. relative humidity
Compliant to EN 60065
Safety
EMC emission
Compliant to EN 61000-6-3, EN 55022
EMC immunity
Compliant to EN 61000-4-3
CE, FCC
EMC approvals
Compliant to EN 61000-4-2
Static resistance
Power harmonics
Compliant to EN 61000-3-2
Surge resistance
Compliant to EN 61000-4-5
EFT test
Compliant to EN 61000-4-4
Transient power-off test
Compliant to EN 61000-4-11
Electrical
Unbalanced audio inputs
-12 to +12 dBV nominal
-6 to +18 dBV nominal
Balanced audio inputs
Emergency switch connector
Emergency control input
32 Ohm to 2 kOhm
Headphone output
Nominal 1 Vpp, minimum 10 mVpp, 50 Ohm
HF input
1 Vpp, 6 V DC, 50 Ohm
HF output
Mains voltage
Power consumption
Power consumption (standby)
110 to 260 V, 50 to 60 Hz
Maximum 55 W
29 W
Mechanical
Mounting
Brackets for 19" rack mounting or fixing to a table top;
detachable feet for free-standing use on a table top
Dimensions h x w x d (mm)
99 × 430 × 325
7.5 kg
Weight
White
Color
Ordering Information
HCS-5100MA/08
8 CHs Digital Infrared Transmitter
(with 6-pin connector, compatible with HCS-4100M/20)
3.6
HCS-5100 Series Digital Infrared Language Distribution System
System Connection
3.7
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100MB/04
4 CHs Digital Infrared Transmitter
The transmitter is the heart of HCS-5100 system. HCS-5100MB/04
accepts and modulates up to 4 unbalanced audio signals onto
carrier waves which are transmitted to radiators located in the room.
It can either be connected to HCS-850PB/10 interpretation desks
and HCS-4100/20 conference main unit through HCS-4110M/20, or
be used as a stand-alone system for distributing external audio
signals. HCS-5100MB/04 is suitable for either tabletop or 19-inch
rack mounting using. Four feet (for tabletop) and two brackets (for
rack mounting) are supplied.
Features
Controls and Indicators
■
Compliant to IEC 61603-7 and IEC 60914
■
256×32 LCD can display the status of the transmitter and the
■
Compatible with any other IR simultaneous interpretation
system compliant to IEC 61603-7
■
Four buttons for configuration
menu of system configuration
■
DQPSK digital modulation/demodulation technology
■
Power switch with indicator (red)
■
Capable of distributing a maximum of 4 audio channels
■
Monitor channel select knob
■
Conference hall privacy; the congress venue itself acts as a
■
Monitor volume control knob
barrier to infrared signals escaping and being overheard, as
■
Mini IR radiators
infrared is unable to pass through opaque objects such as
walls
■
■
Suitable for various kinds (small/medium/large international) of
Interconnections
conference halls and outdoor venues
■
Ø 3.5 mm jack for stereo monitor earphone
eliminates
■
4 BNC connectors for output HF signal to radiator. To each
Each audio channel can be assigned a language name for
■
1 BNC connector for receiving HF signal from other transmitter
easy identification
■
Ethernet and RS-232 ports for connection to computer
Flexible configuration of channels and channel quality modes:
■
Emergency signal interface: when the public emergency
Transmitting
in
2~8
MHz
frequency
band
disturbance from high frequency lighting systems
■
■
connector, up to 30 radiators can be connected
™ Mono, standard quality, maximum 4 channels
system is active, alarm signal can be fed to all channels
™ Mono, perfect quality, maximum 2 channels
automatically
™ Stereo, standard quality, maximum 2 channels
■
4 audio signal input connectors to connect external unbalanced
■
2 female XLR connectors for external audio inputs to connect
™ Stereo, perfect quality, maximum 1 channels
■
audio input signals
Adjustable sensitivity for each input to enable fine tuning of
audio levels
■
auxiliary balanced audio signals such as music, floor language
Automatic synchronization to the number of channels in use by
or emergency audio signal
the system
■
■
“Bypass” mode for distribution of signals from another
■
Combination mode: two N channel IR transmitters can be
incorporated to make up a 2N channel system, at most 8
channels
■
During adjournment, music mode can be used to feed music to
all channels
■
Independent test facility: self-generates diverse frequencies for
system debugging
■
Built-in infrared emitters in transmitter for audio monitoring in
operating room
■
With 25Pin D-SUB interface for connecting up to 3
HCS-850PB/10 interpretation desks
■
desk
interface
for
HCS-850PB/10 interpretation desks
transmitter allows multiple rooms to be used
■
Interpretation
Universal mains power facility allows use worldwide
3.8
Extension interface
connecting
up
to
3
HCS-5100 Series Digital Infrared Language Distribution System
Technical Specifications
System Specifications
Modulation
DQPSK, according to IEC 61603-7
Modulation frequency
2 to 6 MHz, according to IEC 61603-7
Carriers 0 to 5
up to 8 MHz
Carriers 6 and 7
20 Hz to 10 kHz (-3dB) at standard quality;
Frequency response
20 Hz to 20 kHz (-3dB) at perfect quality
<0.05%
THD at 1 kHz
Crosstalk attenuation at 1 kHz
>80 dB
Dynamic range
>80 dB
>80 dBA
Weighted SNR
-12 dBV ~ +12 dBV (adjustable)
Input range
System Environmental Conditions
Transport temperature
-40 ºC ~ +70 ºC
Operating temperature
0 ºC ~ +45 ºC
<95%
Max. relative humidity
Compliant to EN 60065
Safety
EMC emission
Compliant to EN 61000-6-3, EN 55022
EMC immunity
Compliant to EN 61000-4-3
CE, FCC
EMC approvals
Compliant to EN 61000-4-2
Static resistance
Power harmonics
Compliant to EN 61000-3-2
Surge resistance
Compliant to EN 61000-4-5
EFT test
Compliant to EN 61000-4-4
Transient power-off test
Compliant to EN 61000-4-11
Electrical
Unbalanced audio inputs
-12 to +12 dBV nominal
-6 to +18 dBV nominal
Balanced audio inputs
Emergency switch connector
Emergency control input
32 Ohm to 2 kOhm
Headphone output
Nominal 1 Vpp, minimum 10 mVpp, 50 Ohm
HF input
1 Vpp, 6 V DC, 50 Ohm
HF output
110 to 260 V, 50 to 60 Hz
Mains voltage
Power consumption
Power consumption (standby)
Maximum 55 W
29 W
Mechanical
Mounting
Brackets for 19" rack mounting or fixing to a table top;
detachable feet for free-standing use on a table top
Dimensions h x w x d (mm)
99 × 430 × 325
7.5 kg
Weight
White
Color
Ordering Information
HCS-5100MB/04
4 CHs Digital Infrared Transmitter
(with 25-pin connector, compatible with HCS-850PB/10)
3.9
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100MB/08
8 CHs Digital Infrared Transmitter
The transmitter is the heart of HCS-5100 system. HCS-5100MB/08
accepts and modulates up to 8 unbalanced audio signals onto
carrier waves which are transmitted to radiators located in the room.
It can either be connected to HCS-850PB/10 interpretation desks
and HCS-4100/20 conference main unit through HCS-4110M/20, or
be used as a stand-alone system for distributing external audio
signals. HCS-5100MB/08 is suitable for either tabletop or 19-inch
rack mounting using. Four feet (for tabletop) and two brackets (for
rack mounting) are supplied.
Features
Controls and Indicators
■
Compliant to IEC 61603-7 and IEC 60914
■
256×32 LCD can display the status of the transmitter and the
■
Compatible with any other IR simultaneous interpretation
system compliant to IEC 61603-7
■
Four buttons for configuration
menu of system configuration
■
DQPSK digital modulation/demodulation technology
■
Power switch with indicator (red)
■
Capable of distributing a maximum of 8 audio channels
■
Monitor channel select knob
■
Conference hall privacy; the congress venue itself acts as a
■
Monitor volume control knob
barrier to infrared signals escaping and being overheard, as
■
Mini IR radiators
infrared is unable to pass through opaque objects such as
walls
■
■
Suitable for various kinds (small/medium/large international) of
Interconnections
conference halls and outdoor venues
■
Ø 3.5 mm jack for stereo monitor earphone
eliminates
■
4 BNC connectors for output HF signal to radiator. To each
Each audio channel can be assigned a language name for
■
1 BNC connector for receiving HF signal from other transmitter
easy identification
■
Ethernet and RS-232 ports for connection to computer
Flexible configuration of channels and channel quality modes:
■
Emergency signal interface: when the public emergency
Transmitting
in
2~8
MHz
frequency
band
disturbance from high frequency lighting systems
■
■
connector, up to 30 radiators can be connected
™ Mono, standard quality, maximum 8 channels
system is active, alarm signal can be fed to all channels
™ Mono, perfect quality, maximum 4 channels
automatically
™ Stereo, standard quality, maximum 4 channels
■
8 audio signal input connectors to connect external unbalanced
■
2 female XLR connectors for external audio inputs to connect
™ Stereo, perfect quality, maximum 2 channels
■
audio input signals
Adjustable sensitivity for each input to enable fine tuning of
audio levels
■
auxiliary balanced audio signals such as music, floor language
Automatic synchronization to the number of channels in use by
or emergency audio signal
the system
■
■
“Bypass” mode for distribution of signals from another
■
Combination mode: two N channel IR transmitters can be
incorporated to make up a 2N channel system, at most 16
channels
■
During adjournment, music mode can be used to feed music to
all channels
■
Independent test facility: self-generates diverse frequencies for
system debugging
■
Built-in infrared emitters in transmitter for audio monitoring in
operating room
■
With 25Pin D-SUB interface for connecting up to 7
HCS-850PB/10 interpretation desks
■
desk
interface
for
HCS-850PB/10 interpretation desks
transmitter allows multiple rooms to be used
■
Interpretation
Universal mains power facility allows use worldwide
3.10
Extension interface
connecting
up
to
7
HCS-5100 Series Digital Infrared Language Distribution System
Technical Specifications
System Specifications
Modulation
DQPSK, according to IEC 61603-7
Modulation frequency
2 to 6 MHz, according to IEC 61603-7
Carriers 0 to 5
up to 8 MHz
Carriers 6 and 7
20 Hz to 10 kHz (-3dB) at standard quality;
Frequency response
20 Hz to 20 kHz (-3dB) at perfect quality
<0.05%
THD at 1 kHz
Crosstalk attenuation at 1 kHz
>80 dB
Dynamic range
>80 dB
>80 dBA
Weighted SNR
-12 dBV ~ +12 dBV (adjustable)
Input range
System Environmental Conditions
Transport temperature
-40 ºC ~ +70 ºC
Operating temperature
0 ºC ~ +45 ºC
<95%
Max. relative humidity
Compliant to EN 60065
Safety
EMC emission
Compliant to EN 61000-6-3, EN 55022
EMC immunity
Compliant to EN 61000-4-3
CE, FCC
EMC approvals
Compliant to EN 61000-4-2
Static resistance
Power harmonics
Compliant to EN 61000-3-2
Surge resistance
Compliant to EN 61000-4-5
EFT test
Compliant to EN 61000-4-4
Transient power-off test
Compliant to EN 61000-4-11
Electrical
Unbalanced audio inputs
-12 to +12 dBV nominal
-6 to +18 dBV nominal
Balanced audio inputs
Emergency switch connector
Emergency control input
32 Ohm to 2 kOhm
Headphone output
Nominal 1 Vpp, minimum 10 mVpp, 50 Ohm
HF input
1 Vpp, 6 V DC, 50 Ohm
HF output
110 to 260 V, 50 to 60 Hz
Mains voltage
Power consumption
Power consumption (standby)
Maximum 55 W
29 W
Mechanical
Mounting
Brackets for 19" rack mounting or fixing to a table top;
detachable feet for free-standing use on a table top
Dimensions h x w x d (mm)
99 × 430 × 325
7.5 kg
Weight
White
Color
Ordering Information
HCS-5100MB/08
8 CHs Digital Infrared Transmitter
(with 25-pin connector, compatible with HCS-850PB/10)
3.11
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100MB/16
16 CHs Digital Infrared Transmitter
The transmitter is the heart of HCS-5100 system. HCS-5100MB/16
accepts and modulates up to 16 unbalanced audio signals onto
carrier waves which are transmitted to radiators located in the room.
It can either be connected to HCS-850PB/10 interpretation desks
and HCS-4100/20 conference main unit through HCS-4110M/20, or
be used as a stand-alone system for distributing external audio
signals. HCS-5100MB/16 is suitable for either tabletop or 19-inch
rack mounting using. Four feet (for tabletop) and two brackets (for
rack mounting) are supplied.
Features
Controls and Indicators
■
Compliant to IEC 61603-7 and IEC 60914
■
256×32 LCD can display the status of the transmitter and the
■
Compatible with any other IR simultaneous interpretation
system compliant to IEC 61603-7
■
Four buttons for configuration
menu of system configuration
■
DQPSK digital modulation/demodulation technology
■
Power switch with indicator (red)
■
Capable of distributing a maximum of 16 audio channels
■
Monitor channel select knob
■
Conference hall privacy; the congress venue itself acts as a
■
Monitor volume control knob
barrier to infrared signals escaping and being overheard, as
■
Mini IR radiators
infrared is unable to pass through opaque objects such as
walls
■
Interconnections
Suitable for various kinds (small/medium/large international) of
■
Ø 3.5 mm jack for stereo monitor earphone
eliminates
■
4 BNC connectors for output HF signal to radiator. To each
Each audio channel can be assigned a language name for
■
1 BNC connector for receiving HF signal from other transmitter
easy identification
■
Ethernet and RS-232 ports for connection to computer
Flexible configuration of channels and channel quality modes:
■
Emergency signal interface: when the public emergency
conference halls and outdoor venues
■
Transmitting
in
2~8
MHz
frequency
band
connector, up to 30 radiators can be connected
disturbance from high frequency lighting systems
■
■
system is active, alarm signal can be fed to all channels
™ Mono, standard quality, maximum 16 channels
automatically
™ Mono, perfect quality, maximum 8 channels
™ Stereo, standard quality, maximum 8 channels
■
16 audio signal input connectors to connect external
■
2 female XLR connectors for external audio inputs to connect
unbalanced audio input signals
™ Stereo, perfect quality, maximum 4 channels
■
Adjustable sensitivity for each input to enable fine tuning of
auxiliary balanced audio signals such as music, floor language
audio levels
■
or emergency audio signal
Automatic synchronization to the number of channels in use by
■
the system
■
■
Combination mode: two N channel IR transmitters can be
incorporated to make up a 2N channel system, at most 32
channels
■
During adjournment, music mode can be used to feed music to
all channels
■
Independent test facility: self-generates diverse frequencies for
system debugging
■
Built-in infrared emitters in transmitter for audio monitoring in
operating room
■
With 25Pin D-SUB interface for connecting up to 11
HCS-850PB/10 interpretation desks
■
desk
interface
for
HCS-850PB/10 interpretation desks
“Bypass” mode for distribution of signals from another
transmitter allows multiple rooms to be used
■
Interpretation
Universal mains power facility allows use worldwide
3.12
Extension interface
connecting
up
to
11
HCS-5100 Series Digital Infrared Language Distribution System
Technical Specifications
System Specifications
Modulation
DQPSK, according to IEC 61603-7
Modulation frequency
2 to 6 MHz, according to IEC 61603-7
Carriers 0 to 5
up to 8 MHz
Carriers 6 and 7
20 Hz to 10 kHz (-3dB) at standard quality
Frequency response
20 Hz to 20 kHz (-3dB) at perfect quality
<0.05%
THD at 1 kHz
Crosstalk attenuation at 1 kHz
>80 dB
Dynamic range
>80 dB
>80 dBA
Weighted SNR
-12 dBV ~ +12 dBV (adjustable)
Input range
System Environmental Conditions
Transport temperature
-40 ºC ~ +70 ºC
Operating temperature
0 ºC ~ +45 ºC
<95%
Max. relative humidity
Compliant to EN 60065
Safety
EMC emission
Compliant to EN 61000-6-3, EN 55022
EMC immunity
Compliant to EN 61000-4-3
CE, FCC
EMC approvals
Compliant to EN 61000-4-2
Static resistance
Power harmonics
Compliant to EN 61000-3-2
Surge resistance
Compliant to EN 61000-4-5
EFT test
Compliant to EN 61000-4-4
Transient power-off test
Compliant to EN 61000-4-11
Electrical
Unbalanced audio inputs
-12 to +12 dBV nominal
-6 to +18 dBV nominal
Balanced audio inputs
Emergency switch connector
Emergency control input
32 Ohm to 2 kOhm
Headphone output
Nominal 1 Vpp, minimum 10 mVpp, 50 Ohm
HF input
1 Vpp, 6 V DC, 50 Ohm
HF output
110 to 260 V, 50 to 60 Hz
Mains voltage
Power consumption
Power consumption (standby)
Maximum 55 W
29 W
Mechanical
Mounting
Brackets for 19" rack mounting or fixing to a table top;
detachable feet for free-standing use on a table top
Dimensions h x w x d (mm)
99 × 430 × 325
7.5 kg
Weight
White
Color
Ordering Information
HCS-5100MB/16
16 CHs Digital Infrared Transmitter
(with 25-pin connector, compatible with HCS-850PB/10)
3.13
HCS-5100 Series Digital Infrared Language Distribution System
System Connection
3.14
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100MC/04
4 CHs Digital Infrared Transmitter
The transmitter is the heart of HCS-5100 system. HCS-5100MC/04
accepts and modulates up to 4 unbalanced audio signals onto
carrier waves which are transmitted to radiators located in the room.
It can either be connected to HCS-4100/20 conference main unit
through HCS-4110M/20, or be used as a stand-alone system for
distributing external audio signals. HCS-5100MC/04 is suitable for
either tabletop or 19-inch rack mounting using. Four feet (for
tabletop) and two brackets (for rack mounting) are supplied.
Features
Controls and Indicators
■
Compliant to IEC 61603-7 and IEC 60914
■
256×32 LCD can display the status of the transmitter and the
■
Compatible with any other IR simultaneous interpretation
system compliant to IEC 61603-7
■
Four buttons for configuration
menu of system configuration
■
DQPSK digital modulation/demodulation technology
■
Power switch with indicator (red)
■
Capable of distributing a maximum of 4 audio channels
■
Monitor channel select knob
■
Conference hall privacy; the congress venue itself acts as a
■
Monitor volume control knob
barrier to infrared signals escaping and being overheard, as
■
Mini IR radiators
infrared is unable to pass through opaque objects such as
walls
■
■
Suitable for various kinds (small/medium/large international) of
Interconnections
conference halls and outdoor venues
■
Ø 3.5 mm jack for stereo monitor earphone
eliminates
■
4 BNC connectors for output HF signal to radiator. To each
Each audio channel can be assigned a language name for
■
1 BNC connector for receiving HF signal from other transmitter
easy identification
■
Ethernet and RS-232 ports for connection to computer
Flexible configuration of channels and channel quality modes:
■
Emergency signal interface: when the public emergency
Transmitting
in
2~8
MHz
frequency
band
disturbance from high frequency lighting systems
■
■
connector, up to 30 radiators can be connected
™ Mono, standard quality, maximum 4 channels
system is active, alarm signal can be fed to all channels
™ Mono, perfect quality, maximum 2 channels
automatically
™ Stereo, standard quality, maximum 2 channels
■
4 audio signal input connectors to connect external unbalanced
■
2 female XLR connectors for external audio inputs to connect
™ Stereo, perfect quality, maximum 1 channels
■
audio input signals
Adjustable sensitivity for each input to enable fine tuning of
audio levels
■
auxiliary balanced audio signals such as music, floor language
Automatic synchronization to the number of channels in use by
or emergency audio signal
the system
■
■
“Bypass” mode for distribution of signals from another
transmitter allows multiple rooms to be used
■
Combination mode: two N channel IR transmitters can be
incorporated to make up a 2N channel system, at most 8
channels
■
During adjournment, music mode can be used to feed music to
all channels
■
Independent test facility: self-generates diverse frequencies for
system debugging
■
Built-in infrared emitters in transmitter for audio monitoring in
operating room
■
Universal mains power facility allows use worldwide
3.15
Extension interface
HCS-5100 Series Digital Infrared Language Distribution System
Technical Specifications
System Specifications
Modulation
DQPSK, according to IEC 61603-7
Modulation frequency
2 to 6 MHz, according to IEC 61603-7
Carriers 0 to 5
up to 8 MHz
Carriers 6 and 7
20 Hz to 10 kHz (-3dB) at standard quality;
Frequency response
20 Hz to 20 kHz (-3dB) at perfect quality
<0.05%
THD at 1 kHz
Crosstalk attenuation at 1 kHz
>80 dB
Dynamic range
>80 dB
>80 dBA
Weighted SNR
-12 dBV ~ +12 dBV (adjustable)
Input range
System Environmental Conditions
Transport temperature
-40 ºC ~ +70 ºC
Operating temperature
0 ºC ~ +45 ºC
<95%
Max. relative humidity
Compliant to EN 60065
Safety
EMC emission
Compliant to EN 61000-6-3, EN 55022
EMC immunity
Compliant to EN 61000-4-3
CE, FCC
EMC approvals
Compliant to EN 61000-4-2
Static resistance
Power harmonics
Compliant to EN 61000-3-2
Surge resistance
Compliant to EN 61000-4-5
EFT test
Compliant to EN 61000-4-4
Transient power-off test
Compliant to EN 61000-4-11
Electrical
Unbalanced audio inputs
-12 to +12 dBV nominal
-6 to +18 dBV nominal
Balanced audio inputs
Emergency switch connector
Emergency control input
32 Ohm to 2 kOhm
Headphone output
Nominal 1 Vpp, minimum 10 mVpp, 50 Ohm
HF input
1 Vpp, 6 V DC, 50 Ohm
HF output
110 to 260 V, 50 to 60 Hz
Mains voltage
Power consumption
Power consumption (standby)
Maximum 55 W
29 W
Mechanical
Mounting
Brackets for 19" rack mounting or fixing to a table top;
detachable feet for free-standing use on a table top
Dimensions h x w x d (mm)
Weight
Color
99 × 430 × 325
7.5 kg
White
Ordering Information
HCS-5100MC/04
4 CHs Digital Infrared Transmitter
3.16
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100MC/08
8 CHs Digital Infrared Transmitter
The transmitter is the heart of HCS-5100 system. HCS-5100MC/08
accepts and modulates up to 8 unbalanced audio signals onto
carrier waves which are transmitted to radiators located in the room.
It can either be connected to HCS-4100/20 conference main unit
through HCS-4110M/20, or be used as a stand-alone system for
distributing external audio signals. HCS-5100MC/08 is suitable for
either tabletop or 19-inch rack mounting using. Four feet (for
tabletop) and two brackets (for rack mounting) are supplied.
Features
Controls and Indicators
■
Compliant to IEC 61603-7 and IEC 60914
■
256×32 LCD can display the status of the transmitter and the
■
Compatible with any other IR simultaneous interpretation
system compliant to IEC 61603-7
■
Four buttons for configuration
menu of system configuration
■
DQPSK digital modulation/demodulation technology
■
Power switch with indicator (red)
■
Capable of distributing a maximum of 8 audio channels
■
Monitor channel select knob
■
Conference hall privacy; the congress venue itself acts as a
■
Monitor volume control knob
barrier to infrared signals escaping and being overheard, as
■
Mini IR radiators
infrared is unable to pass through opaque objects such as
walls
■
■
Suitable for various kinds (small/medium/large international) of
Interconnections
conference halls and outdoor venues
■
Ø 3.5 mm jack for stereo monitor earphone
eliminates
■
4 BNC connectors for output HF signal to radiator. To each
Each audio channel can be assigned a language name for
■
1 BNC connector for receiving HF signal from other transmitter
easy identification
■
Ethernet and RS-232 ports for connection to computer
Flexible configuration of channels and channel quality modes:
■
Emergency signal interface: when the public emergency
Transmitting
in
2~8
MHz
frequency
band
disturbance from high frequency lighting systems
■
■
connector, up to 30 radiators can be connected
™ Mono, standard quality, maximum 8 channels
system is active, alarm signal can be fed to all channels
™ Mono, perfect quality, maximum 4 channels
automatically
™ Stereo, standard quality, maximum 4 channels
■
8 audio signal input connectors to connect external unbalanced
■
2 female XLR connectors for external audio inputs to connect
™ Stereo, perfect quality, maximum 2 channels
■
audio input signals
Adjustable sensitivity for each input to enable fine tuning of
audio levels
■
auxiliary balanced audio signals such as music, floor language
Automatic synchronization to the number of channels in use by
or emergency audio signal
the system
■
■
“Bypass” mode for distribution of signals from another
transmitter allows multiple rooms to be used
■
Combination mode: two N channel IR transmitters can be
incorporated to make up a 2N channel system, at most 16
channels
■
During adjournment, music mode can be used to feed music to
all channels
■
Independent test facility: self-generates diverse frequencies for
system debugging
■
Built-in infrared emitters in transmitter for audio monitoring in
operating room
■
Universal mains power facility allows use worldwide
3.17
Extension interface
HCS-5100 Series Digital Infrared Language Distribution System
Technical Specifications
System Specifications
Modulation
DQPSK, according to IEC 61603-7
Modulation frequency
2 to 6 MHz, according to IEC 61603-7
Carriers 0 to 5
up to 8 MHz
Carriers 6 and 7
20 Hz to 10 kHz (-3dB) at standard quality;
Frequency response
20 Hz to 20 kHz (-3dB) at perfect quality
<0.05%
THD at 1 kHz
Crosstalk attenuation at 1 kHz
>80 dB
Dynamic range
>80 dB
>80 dBA
Weighted SNR
-12 dBV ~ +12 dBV (adjustable)
Input range
System Environmental Conditions
Transport temperature
-40 ºC ~ +70 ºC
Operating temperature
0 ºC ~ +45 ºC
<95%
Max. relative humidity
Compliant to EN 60065
Safety
EMC emission
Compliant to EN 61000-6-3, EN 55022
EMC immunity
Compliant to EN 61000-4-3
CE, FCC
EMC approvals
Compliant to EN 61000-4-2
Static resistance
Power harmonics
Compliant to EN 61000-3-2
Surge resistance
Compliant to EN 61000-4-5
EFT test
Compliant to EN 61000-4-4
Transient power-off test
Compliant to EN 61000-4-11
Electrical
Unbalanced audio inputs
-12 to +12 dBV nominal
-6 to +18 dBV nominal
Balanced audio inputs
Emergency switch connector
Emergency control input
32 Ohm to 2 kOhm
Headphone output
Nominal 1 Vpp, minimum 10 mVpp, 50 Ohm
HF input
1 Vpp, 6 V DC, 50 Ohm
HF output
110 to 260 V, 50 to 60 Hz
Mains voltage
Power consumption
Power consumption (standby)
Maximum 55 W
29 W
Mechanical
Mounting
Brackets for 19" rack mounting or fixing to a table top;
detachable feet for free-standing use on a table top
Dimensions h x w x d (mm)
Weight
Color
99 × 430 × 325
7.5 kg
White
Ordering Information
HCS-5100MC/08
8 CHs Digital Infrared Transmitter
3.18
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100MC/16
16 CHs Digital Infrared Transmitter
The transmitter is the heart of HCS-5100 system. HCS-5100MC/16
accepts and modulates up to 16 unbalanced audio signals onto
carrier waves which are transmitted to radiators located in the room.
It can either be connected to HCS-4100/20 conference main unit
through HCS-4110M/20, or be used as a stand-alone system for
distributing external audio signals. HCS-5100MC/16 is suitable for
either tabletop or 19-inch rack mounting using. Four feet (for
tabletop) and two brackets (for rack mounting) are supplied.
Features
Controls and Indicators
■
Compliant to IEC 61603-7 and IEC 60914
■
256×32 LCD can display the status of the transmitter and the
■
Compatible with any other IR simultaneous interpretation
system compliant to IEC 61603-7
■
Four buttons for configuration
menu of system configuration
■
DQPSK digital modulation/demodulation technology
■
Power switch with indicator (red)
■
Capable of distributing a maximum of 16 audio channels
■
Monitor channel select knob
■
Conference hall privacy; the congress venue itself acts as a
■
Monitor volume control knob
barrier to infrared signals escaping and being overheard, as
■
Mini IR radiators
infrared is unable to pass through opaque objects such as
walls
■
■
Suitable for various kinds (small/medium/large international) of
Interconnections
conference halls and outdoor venues
■
Ø 3.5 mm jack for stereo monitor earphone
eliminates
■
4 BNC connectors for output HF signal to radiator. To each
Each audio channel can be assigned a language name for
■
1 BNC connector for receiving HF signal from other transmitter
easy identification
■
Ethernet and RS-232 ports for connection to computer
Flexible configuration of channels and channel quality modes:
■
Emergency signal interface: when the public emergency
Transmitting
in
2~8
MHz
frequency
band
disturbance from high frequency lighting systems
■
■
connector, up to 30 radiators can be connected
™ Mono, standard quality, maximum 16 channels
system is active, alarm signal can be fed to all channels
™ Mono, perfect quality, maximum 8 channels
automatically
™ Stereo, standard quality, maximum 8 channels
■
16 audio signal input connectors to connect external
■
2 female XLR connectors for external audio inputs to connect
™ Stereo, perfect quality, maximum 4 channels
■
unbalanced audio input signals
Adjustable sensitivity for each input to enable fine tuning of
audio levels
■
auxiliary balanced audio signals such as music, floor language
Automatic synchronization to the number of channels in use by
or emergency audio signal
the system
■
■
“Bypass” mode for distribution of signals from another
transmitter allows multiple rooms to be used
■
Combination mode: two N channel IR transmitters can be
incorporated to make up a 2N channel system, at most 32
channels
■
During adjournment, music mode can be used to feed music to
all channels
■
Independent test facility: self-generates diverse frequencies for
system debugging
■
Built-in infrared emitters in transmitter for audio monitoring in
operating room
■
Universal mains power facility allows use worldwide
3.19
Extension interface
HCS-5100 Series Digital Infrared Language Distribution System
Technical Specifications
System Specifications
Modulation
DQPSK, according to IEC 61603-7
Modulation frequency
2 to 6 MHz, according to IEC 61603-7
Carriers 0 to 5
up to 8 MHz
Carriers 6 and 7
20 Hz to 10 kHz (-3dB) at standard quality;
Frequency response
20 Hz to 20 kHz (-3dB) at perfect quality
<0.05%
THD at 1 kHz
Crosstalk attenuation at 1 kHz
>80 dB
Dynamic range
>80 dB
>80 dBA
Weighted SNR
-12 dBV ~ +12 dBV (adjustable)
Input range
System Environmental Conditions
Transport temperature
-40 ºC ~ +70 ºC
Operating temperature
0 ºC ~ +45 ºC
<95%
Max. relative humidity
Compliant to EN 60065
Safety
EMC emission
Compliant to EN 61000-6-3, EN 55022
EMC immunity
Compliant to EN 61000-4-3
CE, FCC
EMC approvals
Compliant to EN 61000-4-2
Static resistance
Power harmonics
Compliant to EN 61000-3-2
Surge resistance
Compliant to EN 61000-4-5
EFT test
Compliant to EN 61000-4-4
Transient power-off test
Compliant to EN 61000-4-11
Electrical
Unbalanced audio inputs
-12 to +12 dBV nominal
-6 to +18 dBV nominal
Balanced audio inputs
Emergency switch connector
Emergency control input
32 Ohm to 2 kOhm
Headphone output
Nominal 1 Vpp, minimum 10 mVpp, 50 Ohm
HF input
1 Vpp, 6 V DC, 50 Ohm
HF output
110 to 260 V, 50 to 60 Hz
Mains voltage
Power consumption
Power consumption (standby)
Maximum 55 W
29 W
Mechanical
Mounting
Brackets for 19" rack mounting or fixing to a table top;
detachable feet for free-standing use on a table top
Dimensions h x w x d (mm)
Weight
Color
99 × 430 × 325
7.5 kg
White
Ordering Information
HCS-5100MC/16
16 CHs Digital Infrared Transmitter
3.20
HCS-5100 Series Digital Infrared Language Distribution System
System Connection
3.21
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100T/15
Multi-Channel Digital Infrared
Radiator
Technical Specifications
Electrical and optical
Modulation
DQPSK, according to IEC 61603-7
Modulation frequency:
2 to 6 MHz, according to IEC 61603-7
Carriers 0 to 5
Up to 8 MHz
Carriers 6 and 7
Angle of half intensity
HF input
±22
0
Nominal 1 Vpp, minimum 10 mVpp, 50 Ohm
HF output
1 Vpp, 6 V DC, 50 Ohm
Mains voltage
110/220 V, 50 to 60 Hz
35 W
Power consumption
Power consumption (standby)
8W
Mechanical
Features
Mounting
Suspension bracket for direct ceiling mounting;
■
Compliant to IEC 61603-7 and IEC 60914
mounting plates for floor stands; wall mounting
■
Compatible with any other IR simultaneous interpretation
bracket HCS-5100TBZJ can be used for fixing
system compliant to IEC 61603-7
radiator to wall surfaces
■
Standby indication, working indication, failure indication
Dimensions h x w x d (mm)
■
Installation: fixed up by bracket or tripod (various mounting
Weight
methods supported), 10 radiation angles
Front color
■
Half-transmitting angle : ±22°
■
Emission power: 15 W
■
Power consumption: 35 W
■
Maximum radiation range: 30 meters
■
Synchronization ON/OFF with transmitter
■
Automatic gain control
■
HCS-5100T/15
Temperature control: if temperature is too high, control
Manual half-power switch on the rear, convenient for small
conferences
■
Delay compensation for differences in cable lengths between
transmitter and radiators
The radiator receives carrier signals generated by the transmitter
and emits infrared radiation, carrying up to 32 audio distribution
channels. Radiators are connected to the HF (BNC) connectors of
the IR transmitter. A maximum of 30 daisy chained radiators can be
connected to each output.
Controls and Indicators
■
Power indicator
■
Temperature protection indicator
■
Input signal indicator
■
Fault indicator
■
Output power switch
■
Delay compensation indicator
■
Delay compensation buttons (-/+)
Interconnections
■
5.0 kg
Red
Ordering Information
switches to half-power with LED indication
■
145 × 450 × 245
HF input and output connectors (2 x BNC) for connection to
transmitter and loop-through to other radiators
3.22
Multi-channel Digital Infrared Radiator (15 W)
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100T/25
Multi-Channel Digital Infrared
Radiator
Technical Specifications
Electrical and optical
Modulation
DQPSK, according to IEC 61603-7
Modulation frequency:
2 to 6 MHz, according to IEC 61603-7
Carriers 0 to 5
Up to 8 MHz
Carriers 6 and 7
Angle of half intensity
HF input
±22
0
Nominal 1 Vpp, minimum 10 mVpp, 50 Ohm
HF output
1 Vpp, 6 V DC, 50 Ohm
Mains voltage
110/220 V, 50 to 60 Hz
75 W
Power consumption
Power consumption (standby)
8W
Mechanical
Features
Mounting
Suspension bracket for direct ceiling mounting;
■
Compliant to IEC 61603-7 and IEC 60914
mounting plates for floor stands; wall mounting
■
Compatible with any other IR simultaneous interpretation
bracket HCS-5100TBZJ can be used for fixing
system compliant to IEC 61603-7
radiator to wall surfaces
■
Standby indication, working indication, failure indication
Dimensions h x w x d (mm)
■
Installation: fixed up by bracket or tripod (various mounting
Weight
methods supported), 10 radiation angles
Front color
5.0 kg
Red
■
Half-transmitting angle : ±22°
■
Emission power: 25 W
■
Power consumption: 75 W
■
Maximum radiation range: 50 meters
Ordering Information
■
Synchronization ON/OFF with transmitter
■
Automatic gain control
HCS-5100T/25
■
Temperature control: if temperature is too high, control
switches to half-power with LED indication
■
Manual half-power switch on the rear, convenient for small
conferences
■
Delay compensation for differences in cable lengths between
transmitter and radiators
The radiator receives carrier signals generated by the transmitter
and emits infrared radiation, carrying up to 32 audio distribution
channels. Radiators are connected to the HF (BNC) connectors of
the IR transmitter. A maximum of 30 daisy chained radiators can be
connected to each output.
Controls and Indicators
■
Power indicator
■
Temperature protection indicator
■
Input signal indicator
■
Fault indicator
■
Output power switch
■
Delay compensation indicator
■
Delay compensation buttons (-/+)
Interconnections
■
HF input and output connectors (2 x BNC) for connection to
transmitter and loop-through to other radiators
3.23
145 × 450 × 245
Multi-channel Digital Infrared Radiator (25 W)
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100T/35
Multi-Channel Digital Infrared
Radiator
Technical Specifications
Electrical and optical
Modulation
DQPSK, according to IEC 61603-7
Modulation frequency:
2 to 6 MHz, according to IEC 61603-7
Carriers 0 to 5
Up to 8 MHz
Carriers 6 and 7
Angle of half intensity
HF input
±22
0
Nominal 1 Vpp, minimum 10 mVpp, 50 Ohm
HF output
1 Vpp, 6 V DC, 50 Ohm
Mains voltage
110/220 V, 50 to 60 Hz
150 W
Power consumption
Power consumption (standby)
8W
Mechanical
Features
Mounting
Suspension bracket for direct ceiling mounting;
■
Compliant to IEC 61603-7 and IEC 60914
mounting plates for floor stands; wall mounting
■
Compatible with any other IR simultaneous interpretation
bracket HCS-5100TBZJ can be used for fixing
system compliant to IEC 61603-7
radiator to wall surfaces
■
Standby indication, working indication, failure indication
Dimensions h x w x d (mm)
■
Installation: fixed up by bracket or tripod (various mounting
Weight
methods supported), 10 radiation angles
Front color
6.5 kg
Red
■
Half-transmitting angle: ±22°
■
Emission power: 35 W
■
Power consumption: 150 W
■
Maximum radiation range: 97 meters
Ordering Information
■
Synchronization ON/OFF with transmitter
■
Automatic gain control
HCS-5100T/35
■
Temperature control: if temperature is too high, control
switches to half-power with LED indication
■
Manual half-power switch on the rear, convenient for small
conferences
■
Delay compensation for differences in cable lengths between
transmitter and radiators
The radiator receives carrier signals generated by the transmitter
and emits infrared radiation, carrying up to 32 audio distribution
channels. Radiators are connected to the HF (BNC) connectors of
the IR transmitter. A maximum of 30 daisy chained radiators can be
connected to each output.
Controls and Indicators
■
Power indicator
■
Temperature protection indicator
■
Input signal indicator
■
Fault indicator
■
Output power switch
■
Delay compensation indicator
■
Delay compensation buttons (-/+)
Interconnections
■
HF input and output connectors (2 x BNC) for connection to
transmitter and loop-through to other radiators
3.24
145 × 500 × 305
Multi-channel Digital Infrared Radiator (35 W)
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100TBZJ
Wall Mounting Bracket
Features
■
Wall mounting bracket, can be used for fixing radiator to wall
surfaces
Technical Specifications
Mechanical
Dimensions h x w x d (mm)
Weight
Color
203× 200 × 285
1.55 kg
Silver
Ordering Information
HCS-5100TBZJ
Wall-mounting Bracket
3.25
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100R
Digital Infrared Receivers
HCS-5100R is a series of IR receivers, which can receive up to 32
language channels. Both rechargeable NI-HM battery and
disposable battery can be used. The receiver is equipped with
channel selector, volume control, power switch, Ø 3.5 mm stereo
earphone jack, and charging circuit on the PCB. A LCD displays
channel number with language name, received signal intensity,
battery capacity and volume.
Controls and Indicators
■
LCD can display channel number, language name, battery
■
Power switch
■
Channel selector buttons
■
Volume control buttons
capacity, signal intensity and volume
Features
■
Compliant to IEC 61603-7 and IEC 60914
■
Compatible with any other IR simultaneous interpretation
Interconnections
system compliant to IEC 61603-7
■
Ø 3.5 mm stereo earphone jack
Independent intellectual property chipset for digital infrared
■
Charging contacts
■
processor,
and
DQPSK
digital
modulation/demodulation
technology
■
Transmitting
in
2~8
MHz
frequency
band
eliminates
Technical Specifications
disturbance from high frequency lighting systems
■
Channel selection via up/down button, at most 4,8,16 or 32
System Specifications
channels available
■
Modulation
LCD display with channel number, language name, battery and
signal status indication
■
Frequency response
to scroll through unused channels
■
Unique 270º super wide reception angle, ensuring perfect
Audio signal automatically muted when signal is too low,
■
Ergonomically compact and elegant design
ensuring that the user receives only high quality audio
■
■
20 Hz to 10 kHz (-3dB) at standard quality;
20 Hz to 20 kHz (-3dB) at perfect quality
sound quality even when casually placed
■
up to 8 MHz
Carriers 6 and 7
number of channels in use by the system, eliminating the need
Adjustable volume
2 to 6 MHz, according to IEC 61603-7
Carriers 0 to 5
Number of available channels is always the same as the
■
DQPSK, according to IEC 61603-7
Modulation frequency
THD at 1 KHz
<0.05%
Crosstalk attenuation at 1 kHz
>80 dB
Dynamic range
>80 dB
Weighted SNR
>80 dBA
Input range
-12 dBV ~ +12 dBV (adjustable)
Lightweight and handy receiver in conjunction with single
earphone (EP-820AS/EP-820BS) or headphone (HCS-5100PA)
Electrical
for easy and comfortable use
IR irradiance level
Can be hung over the neck via a nice strap or fit into the shirt
Angle of sensitivity
pocket
Headphone output level at 2.4 V
2
4 mW/m per carrier
270º
450 mVrms (speech at maximum
■
Freedom of movement within the range of IR power radiator
■
No limit to the receiver number within the IR power radiation
Headphone output freq. range
20 Hz to 20 kHz
range
Headphone output impedance
32 Ohm to 2 kOhm
■
Works without errors, even in bright sunlight
Max. SNR
■
Built-in high precision rechargeable circuitry to prolong the
Supply voltage
battery life
Power consumption
■
volume, 32 Ohm headphone)
Can be used with disposable batteries (2×AA alkaline batteries,
Normal (at 2.4 V)
not included) or environmentally-friendly Ni-MH rechargeable
Headphone jack unplugged
battery pack (not included)
>80 dBA
1.8 to 3.6 V, nominal 2.4 V
38 mA (32 Ohm headphone)
0 mA
Battery life
■
No power consumption when headphone is disconnected
2×AA alkaline cells
70 hours
■
Measurement mode for easy checking of radiator coverage
Rechargeable battery pack
52 hours
■
Can be equipped with alarm system to prevent loss
■
Can work with HCS-5300 digital infrared wireless conference
system and achieve up to 1+3 channels infrared wireless
simultaneous interpretation
3.26
HCS-5100 Series Digital Infrared Language Distribution System
Mechanical
155 × 46 × 24
Dimensions h x w x d (mm)
Weight
80 g
Excl. batteries
135 g
Incl. batteries
Gray
Color
Ordering Information
HCS-5100R/04
4 CHs Digital Infrared Receiver
(LCD,
language
display,
optional rechargeable battery
pack or 2xAA alkaline cells)
HCS-5100R/08
8 CHs Digital Infrared Receiver
(LCD,
language
display,
optional rechargeable battery
pack or 2xAA alkaline cells)
HCS-5100R/16
16 CHs Digital Infrared Receiver
(LCD,
language
display,
optional rechargeable battery
pack or 2xAA alkaline cells)
HCS-5100R/32
32 CHs Digital Infrared Receiver
(LCD,
language
display,
optional rechargeable battery
pack or 2xAA alkaline cells)
3.27
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100RA
Digital Infrared Receiver
HCS-5100RA is a series of IR receivers, which can receive up to 32
language channels, only for disposable battery. The receiver is
equipped with channel selector, volume control, power switch, Ø
3.5 mm stereo earphone jack. A LCD displays channel number with
language name, received signal intensity, battery capacity and
volume.
Controls and Indicators
■
LCD can display channel number, language name, battery
■
Power switch
■
Channel selector buttons
■
Volume control buttons
capacity, signal intensity and volume
Features
■
Compliant to IEC 61603-7 and IEC 60914
■
Compatible with any other IR simultaneous interpretation
Interconnections
■
system compliant to IEC 61603-7
■
Independent intellectual property chipset for digital infrared
processor,
and
DQPSK
digital
modulation/demodulation
technology
■
Transmitting
in
2~8
MHz
frequency
band
Technical Specifications
eliminates
disturbance from high frequency lighting systems
■
System Specifications
Channel selection via up/down button, at most 4,8,16 or 32
Modulation
channels available
■
LCD display with channel number, language name, battery and
Frequency response
Unique 270º super wide reception angle, ensuring perfect
sound quality even when casually placed
■
Audio signal automatically muted when signal is too low,
THD at 1 KHz
<0.05%
Crosstalk attenuation at 1 kHz
>80 dB
Dynamic range
>80 dB
Weighted SNR
>80 dBA
Input range
ensuring that the user receives only high quality audio
■
Ergonomically compact and elegant design
■
Lightweight and handy receiver in conjunction with single
Electrical
earphone (EP-820AS/EP-820BS) or headphone (HCS-5100PA)
IR irradiance level
■
20 Hz to 10 kHz (-3dB) at standard quality;
20 Hz to 20 kHz (-3dB) at perfect quality
to scroll through unused channels
■
up to 8 MHz
Carriers 6 and 7
number of channels in use by the system, eliminating the need
Adjustable volume
2 to 6 MHz, according to IEC 61603-7
Carriers 0 to 5
Number of available channels is always the same as the
■
DQPSK, according to IEC 61603-7
Modulation frequency
signal status indication
■
Ø 3.5 mm stereo earphone jack
for easy and comfortable use
Angle of sensitivity
Can be hung over the neck via a nice strap or fit into the shirt
Headphone output level at 2.4 V
Freedom of movement within the range of IR power radiator
20 Hz to 20 kHz
32 Ohm to 2 kOhm
No limit to the receiver number within the IR power radiation
range
Max. SNR
■
Works without errors, even in bright sunlight
Supply voltage
■
Can be used with disposable batteries (2×AA alkaline batteries,
Power consumption
■
not included)
Normal ( at 2.4 V)
No power consumption when headphone is disconnected
Headphone jack unplugged
■
Measurement mode for easy checking of radiator coverage
■
Can be equipped with alarm system to prevent loss
■
270º
450 mVrms (speech at maximum
Headphone output freq. range
Headphone output impedance
■
2
4 mW/m per carrier
volume, 32 Ohm headphone)
pocket
■
-12 dBV ~ +12 dBV (adjustable)
Battery life
Can work with HCS-5300 digital infrared wireless conference
>80 dBA
1.8 to 3.6 V, nominal 2.4 V
38 mA (32 Ohm headphone)
0 mA
70 hours
Mechanical
system and achieve up to 1+3 channels infrared wireless
Dimensions h x w x d (mm)
simultaneous interpretation
155 × 46 × 24
Weight
Excl. batteries
Incl. batteries
Color
3.28
80 g
135 g
Gray
HCS-5100 Series Digital Infrared Language Distribution System
Ordering Information
HCS-5100RA/04
4 CHs Digital Infrared Receiver
(LCD, language display, 2xAA alkaline cells)
HCS-5100RA/08
8 CHs Digital Infrared Receiver
(LCD, language display, 2xAA alkaline cells)
HCS-5100RA/16
16 CHs Digital Infrared Receiver
(LCD, language display, 2xAA alkaline cells)
HCS-5100RA/32
32 CHs Digital Infrared Receiver
(LCD, language display, 2xAA alkaline cells)
3.29
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100CHG
IR Receiver Charging Case
HCS-5100KS
IR Receiver Storage Case
Features
Features
■
Used for charging IR receivers (HCS-5100R)
■
Used for storing and transporting IR receivers
■
Charges 48 pcs of IR receivers per charging
■
Every case can store up to 100 IR receivers
■
Uses universal power supply with automatic voltage matching
Controls and Indicators
Technical Specifications
■
Power switch
Mechanical
■
Charging indicator on the receiver
Dimensions h x w x d (mm)
Gross weight
Interconnections
14 kg (w/100 pcs IR receivers, w/o battery)
Blue
Color
■
Power output interface
■
Power input interface
■
Charging lattices
205 × 669 × 307
6 kg (w/o IR receiver)
Net weight
Ordering Information
HCS-5100KS
Technical Specifications
Electrical
Mains voltage
AC 110 V ~ 120 V/220 V ~ 240 V
270 W (48 receivers charging)
Power consumption
Power consumption (standby)
7 W (no receiver in charging case)
Mechanical
Dimensions h x w x d (mm)
Net weight
Color
240 × 516 × 386
12.3 kg (w/o IR receiver)
Blue
Ordering Information
HCS-5100CHG
IR Receiver Charging Case (48 pcs/case)
3.30
IR Receiver Storage Case (100 pcs/case)
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100PA Headphone (stereo)
EP-820AS Single Earphone
Features
Features
■
Used with the receiver or a conference unit
■
Used with the receiver or a conference unit
■
Hi-Fi sound quality
■
Hi-Fi sound quality
■
32 Ω × 2，Ø 3.5 mm stereo plug
■
Ø 3.5 mm stereo plug
■
Frequency response: 20 Hz to 20 kHz
■
32 Ω (Tip and Sleeve, Ring: NC)
■
Sensitivity: ≥108 dBA/1 mW
■
Frequency response: 50 Hz to 20 kHz
■
Sensitivity: ≥102 dBA/1 mW
Ordering Information
HCS-5100PA
Ordering Information
Headphone (stereo)
EP-820AS
Single Earphone
EP-920BS Inner Earphone (stereo)
EP-820BS Single Earphone
Features
Features
■
Used with the receiver or a conference unit
■
Used with the receiver or a conference unit
■
Hi-Fi sound quality
■
Hi-Fi sound quality
■
16 Ω × 2，Ø 3.5 mm stereo plug
■
Ø 3.5 mm stereo plug
■
Frequency response: 50 Hz to 20 kHz
■
32 Ω (Tip and Sleeve, Ring: NC)
■
Sensitivity: ≥108 dBA/1 mW
■
Frequency response: 20 Hz to 20 kHz
■
Sensitivity: ≥108 dBA/1 mW
Ordering Information
EP-920BS
Ordering Information
Inner Earphone (stereo)
EP-820BS
3.31
Single Earphone
HCS-5100 Series Digital Infrared Language Distribution System
HCS-5100BAT
Ni-MH Rechargeable Battery Pack
RG-58 Coaxial-cable
Features
Features
■
Ni-MH rechargeable battery pack
■
Equivalent impedance: 50 Ohm
Suitable for HCS-5100R series digital infrared receiver
■
Ø 5 mm
■
Length of per roll：200 meter
■
Ordering Information
Technical Specifications
RG-58
Electrical
Voltage
Capacity
1600 mAh
Mechanical
Dimensions h x w x d (mm)
Weight
Color
Coaxial-cable
2.4 V
BNC Connector
53 × 29 × 15
55 g
Green
Ordering Information
HCS-5100BAT
Ni-MH Rechargeable Battery Pack
Ordering Information
BNC Connector
3.32
BNC Connector
HCS-5100 Series Digital Infrared Language Distribution System
HCS-836
Burglarproof Detection System (for
IR Receiver)
HCS-851A Interpreter Booth
Features
Features
■
Compliant to ISO 4043
■
Odorless, antistatic, fire-retardant material
simultaneous reduction filtering, noise suppression circuit, etc
■
Optimum insulation and sound absorption
User-friendly design with two ring tones and three volume
■
■
High sensitivity, low failure rate
■
Adopts
■
multiple
advanced
techniques,
such
as
PLL
Hinged door (with observation window 0.20 m × 0.22 m), opens
outwards, operates silently
levels optional
■
Easy to install, debug and use
■
Novel and unique appearance
■
Two/Three front windows and two side windows (dimensions:
0.76 m × 0.85 m each); lower edge of the window: 0.80 m from
booth floor
■
Booth to hall (and vice versa) - sound pressure level difference:
>18 dB (1 kHz)
Technical Specifications
■
Reverberation time inside the booth: between 0.3 s and 0.5 s
(octave bands from 125 Hz to 4000 Hz, booth unoccupied)
Electrical
Maximum scan bandwidth
■
7.7 MHz ~ 8.7 MHz
162/171/180/189 Hz
Scan frequency
Signal sampling period
21.8 μs
Detection range
≤1.2 m
Tag detection frequency
≥2 m/s
Alarm volume optional
■
Shipping needs HCSS-851K (interpreter booth shipping case)
■
Two types optional:
™ Internal dimensions h × w × d (cm): 200 × 167 × 160,
accommodates two interpreters (HCS-851A/02)
8.2 MHz/10.5 MHz
Frequency optional
Sound pressure level inside the booth by ventilating system
≤40 dBA
™ Internal dimensions h × w × d (cm): 200×250×160,
High/medium/low
accommodates three interpreters (HCS-851A/03)
Mechanical
Dimensions h x w x d (mm)
1650 × 340 × 85
Weight
22 kg
Ordering Information
Color
Black
HCS-851A/02
Interpreter Booth (accommodates 2 interpreters)
HCS-851A/03
Interpreter Booth (accommodates 3 interpreters)
Ordering Information
HCS-836
Burglarproof Detection System (for IR receiver)
3.33