V I S H AY I N T E R T E C H N O L O G Y, I N C .
Vishay Esta Power Capacitors
PhMKDg
ESTAdry D-Type Capacitor
KEY BENEFITS
•
•
•
•
•
Smallest available height for 50 kvar units: 210 mm (+ 68 mm for terminals)
Excellent heat dissipation
Screw-on terminal with M10 bolts
Resin filling provides thermal conductivity similar to that of oil-filled capacitors
Aluminum case is welded and hermetically sealed
APPLICATIONS
• Recommended for power factor correction and filters in low-voltage applications ≤ 1000 V
RESOURCES
• Datasheet: PhMKDg - www.vishay.com/doc?13007
• For technical questions contact esta@vishay.com
A WORLD OF
SOLUTIONS
Product Sheet
1/2
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VMN-PT9018-1602
www.vishay.com
PhMKDg...,
Triangular,
LVAC
ESTAdry D-Type,
LVAC Power
Capacitors
V I SFEATURES
H AY I N TVishay
ERTEC
H N O L O G Y, I N C .
ESTA
www.vishay.com
• Self-healing technology
ESTAdry D-Type, LVAC Power Capacitors
• Over pressure tear-off fuse
Vishay Esta Power Capacitors
• Smallest available height for 50 kvar units: 210 mm
FEATURES
(+ 68 mm for terminals)
PhMKDg..., Triangular,
LVAC
• Self-healing
technology
www.vishay.com
ESTAdry D-Type,
www.vishay.com
PhMKDg
• Excellent heat dissipation
• Over
pressure
tear-off fuse
Vishay
ESTA
• Screw-on terminal with M10 bolts
• Smallest available height for 50 kvar units: 210 mm
Resin filling provides thermal conductivity similar to that of
LVAC Power Capacitors (+ 68 mm for terminals)• oil-filled
capacitors
• Excellent heat dissipation
FEATURES
Vishay
ESTA • Aluminum case is welded and hermetically sealed
• Screw-on terminal with M10 bolts
• Self-healing technology
• No paint required for OUTDOOR applications
• Over pressure tear-off fuse
• Resin filling provides thermal conductivity similar to that of
• UL and cUL approved
oil-filled
• Smallest available height for 50 kvar
units:capacitors
210 mm
PhMKDg..., Triangular, LVAC
ESTAdry D-Type Capacitor
ESTAdry D-Type, LVAC Power Capacitors
(+ 68 mm for terminals)
• Aluminum case is welded
and hermetically sealed
APPLICATIONS
FEATURES
• Excellent heat dissipation
• No paint required for OUTDOOR
• Areas withapplications
dust and moisture, which require a high degree
• Self-healing
technology
• Screw-on
terminal with M10 bolts
• UL and
cUL
approved
of protection and high creepage distances. Also for
• Resin filling
provides
similar
to that
of
• Over pressure
tear-off
fuse thermal conductivity
oil-filled capacitors
OUTDOOR applications
• Smallest available height for 50 kvar units: 210 mm
• Aluminum case is welded and hermetically
sealed
APPLICATIONS
• Free-standing, fixed individual PFC (e.g. motors, lighting,
(+ 68 mm for terminals)
• No paint required for OUTDOOR applications
• Areas with dust and moisture,
which require a high degree
transformers)
• Excellent
heat dissipation
• UL and cUL approved
of protection and high creepage distances. Also for
• Automatic central PFC (e.g. group of loads)
• Screw-on terminal with M10 bolts
OUTDOOR applications
APPLICATIONS
• Harmonic trap (e.g. UPS, frequency drives, converter)
• Resin filling
provides thermal conductivity similar to that of
• require
Free-standing,
fixed individual PFC (e.g. motors, lighting,
Areas with dust and moisture, which
a high degree
oil-filled•capacitors
•
Pole - mounted PFC
of protection and high creepage transformers)
distances. Also for
• AluminumOUTDOOR
case is welded
and hermetically sealed
applications
• Automatic central PFC (e.g. group of loads)
• No paint• required
for OUTDOOR
applications
Free-standing,
fixed individual
PFC (e.g. motors, lighting,
• Harmonic trap (e.g. UPS, frequency drives, converter)
QUICK
REFERENCE
DATA
transformers)
• UL and cUL approved
• Automatic central PFC (e.g. group•ofPole
loads)- mounted
PFC
Series
PhMKDg…,
triangular
PhMKDgF…, triangular
PhMKDg..., Triangular, LVAC
www.vishay.com
• Harmonic trap (e.g. UPS, frequency drives, converter)
APPLICATIONS
Vishay ESTA
ESTAdry D-type, LVAC power capacitors -
ESTAdry D-type, LVAC power capacitors -
PhMKDg..., Triangular, LVAC
Description
25
- INDOOR, IP00
dry - OUTDOOR, IP00
• Pole
- mounted
PFC
• Areas with
dust
and moisture,
which require a highdry
degree
QUICK REFERENCE
DATA
DIMENSIONS,
INDOORand high creepage distances.
Type
Capacitors,
fixed, low voltage
Capacitors, fixed, low voltage
of protection
Also for
www.vishay.com
Vishay
Series
PhMKDgF…,
triangularESTA
OUTDOOR applications PhMKDg…, triangular
QUICK REFERENCE DATA
Technology
MKP, metallized
polypropylene
MKP, metallized polypropylene film
Required space
for bulgingfilm
ESTAdry
D-type,
LVAC
power
capacitors
ESTAdry
D-type,
LVAC
power capacitors Series
PhMKDg…,
triangular fixed individual PFC
PhMKDgF…,
triangular lighting,
• Free-standing,
(e.g. motors,
Description D-TYPE PhMKDg,
Voltage
max.
(V)
1000
1000
ESTAdry
INDOOR
dry - INDOOR, IP00 M10
dry - OUTDOOR, IP00
Screw bolt M10
ESTAdry D-type,
LVAC power capacitors ESTAdry D-type, LVAC power capacitors transformers)
Description
Hexagonal nut M10
dry - INDOOR, min.
IP00 (μF)
DATACapacitance
- OUTDOOR,
IP00
3-phase
D: 3 x 115.5, 3-phase
Y: 3 x 140.1
3-phase
Capacitors,dry
fixed,
low
voltage
Capacitors,
fixed, low
voltageD: 3 x 115.5, 3-phase Y: 3 x 140.1
• Automatic central PFC (e.g. group
of loads)
Capacitors, fixed, low voltage
Capacitors, fixed, low voltage
+2
68 - 2
Type
TECHNICAL
Type
Spring washer wave
Capacitance max. (μF)
H±1
UICK REFERENCE
DATA
Output min. (kvar)
30
30
1.3 x In, 30
Output min. (kvar)
30
OvercurrentPhMKDg…, triangular
1.43
x In with 10 %
overvoltages, 10 % over capacitance and harmonics included,
PhMKDgF…,
triangular
56.2
56.2
(in
accordance
with
the
above
standards)
continuous
operation
Output max. (kvar)
56.2
56.2
ESTAdry D-type, LVAC power capacitors ESTAdry
D-type,
LVAC
capacitors
www.vishay.com
Please
also
referpower
to “Terms
and Definitions”.
hay.com
cription
www.vishay.com
www.vishay.com
dry - INDOOR, IP00
IP00
- 5 dry
% /-+OUTDOOR,
10 % in accordance
with the standards
Tolerance on capacitance
±
5
%
as
Vishay
ESTA
standard
e
Capacitors, fixed, low voltage
Capacitors, fixed, low voltage
DIMENSIONS, OUTDOOR
OR
2.15 x Ucn, VAC, 2 s (routine test)
Toothed lock washer
DIMENSIONS, INDOORTest voltage, terminal / terminal
DIMENSIONS, OUTDOOR
hnology
MKP, metallized polypropylene film
MKP, metallized polypropylene
M12film
Hexagonal nut M12
Test
voltage,
terminal
/
casing
6000
VAC,
2 s (routine test)
Required space for bulging
Required space for bulging
age max. (V)
1000
1000current In
M12
Inrush current
300 times rated
PhMKDg..., Triangular,
LVAC Triangular, LVAC
PhMKDg...,
Output max. (kvar)
Vishay ESTA
+1
15.8 + 1
15.8
56.2
Max. 65 °C (measured
on top of the can)
1
Cooling
Naturally air-cooled
For technical
questions,
Document
Number:
13007 contact: esta@vishay.com
H ±1
Permissible relative
humidity
Maximum
95 %
THIScontact:
DOCUMENT
IS SUBJECT
TO CHANGE
WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
For technical
questions,
esta@vishay.com
78
SUBJECT
TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
THIS DOCUMENT IS SUBJECT
TO CHANGE
WITHOUT NOTICE. THE PRODUCTSARE
DESCRIBED
HEREIN
AND
Maximum
allowed altitude
2000 m
above
seaTHIS
levelDOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Mounting
position
Revision:
27-Jul-11
Mounting and grounding
Vertical and1horizontal
Document Number: 13007
For technical
questions,
contact:
Threaded
M12
stud esta@vishay.com
at the bottom of the container
15.8 + 1
Filling agent
Terminals
Toothed lock washer
Polypropylene
film, self-healing
Hexagonal nut
M12
Resin-filled (ESTAdry),
non-PCB, non-toxic
Δ
Y
+2
44 - 2
70
X:
PhMKDg460.3.50,00-K
5345-44803-xx
STYLE
Drawing 6
PhMKDg525.3.50,00-K
5345-44824-xx
Drawing 6
Terminals M8
DISCHARGE RESISTORS
PhMKDg690.2.50,00-K
5345-44807-xx
Terminals M10
PhMKDg760.2.50,00-K
5345-44808-xx
Δ
Y
M12 mounting stud
ORDERING INFORMATION
Packing units
460
525
690
760
WEIGHT
kg
HEIGHT
H
mm
72.2
4.0
210
4.0
210
4.0
210
65.6
56.2 / 50
3 x 308.0 
73.7 / 69.6
50
3 x 250.7 
62.8
4.0
210
RECOMMENDED TORQUE
Drawing 7
50
3 x 192.5 
55.0
4.0
210
Drawing 7
6 Nm
50
3 x 334.3 Y
41.8
4.0
210
ACCESSORIES:
SUPPORT
FOR POLE AND WALL MOUNTING
ACCESSORIES:
SUPPORT
FOR
MOUNTING
10WALL
Nm
50
3 x 275.5
Y
38.0POLE AND
4.0
210
Y
10 Nm
2/2
200
4
For technical questions, contact: esta@vishay.com
A-A
VMN-PT9018-1602
1 piece per carton
Notes
THIS DOCUMENT IS SUBJECT
TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND
• Other voltage ratings, outputs, and frequencies on request.
THIS DOCUMENT ARE(1)SUBJECT
TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Version no. xx may differ as it respects small changes, e.g. on the label
Revision: 27-Jul-11
A
A
200
PhMKDg440.3.56,20-K
5345-44805-xx
440 / 415
RECOMMENDED
TORQUES
CURRENT
A
(50 Hz)
160
160
ARTICLE NO. (1)
78
1
160
78
Revision 27-Jan-16
78
M10
172
3-PHASE CAPACITORS IN TRAINGULAR CASING, INDOOR
RATED
RATED
DocumentCAPACITANCE
Number: 13007
VOLTAGE
OUTPUT
μF
For technical questions, contact: esta@vishay.com
V
kvar
THIS DOCUMENT IS SUBJECT TO CHANGE
WITHOUT NOTICE. THE PRODUCTS
DESCRIBED400
HEREIN AND50
THIS DOCUMENT
PhMKDg400.3.50,00-K
5345-44814-xx
3 x 331.6 
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PhMKDg440.3.50,00-K
5345-44804-xx
440
50
3 x 274.0 
Product Sheet
M10
Screw bolt M8 X 10
Slotted nut M10
Spring washer wave
Hexagonal-nut M10
Screw bolt M10
X
172
70
X:
70
TYPE
Δ
X
Threaded studs M10
172
172
70
M12
78
15.8 + 1
Dielectric Toothed lock washer
M12
Hexagonal nut M12
+2
68 - 2
DISCHARGE RESISTORS
+2
68 - 2
Safety
All-phase
overpressure
tear-off fuse,
self-healing
THISfeatures
DOCUMENT IS SUBJECT TO CHANGE WITHOUT
NOTICE.
THE PRODUCTS
DESCRIBED
HEREIN AND THIS DOCUMENT
Drawing
6
ARE SUBJECT TO SPECIFIC DISCLAIMERS,
SET
FORTH
Casing
Aluminum can,
welded
topAT www.vishay.com/doc?91000
on: 27-Jul-11
ORS
Document Number: 13007
H ±1
1
H±1
H±1
Revision: 27-Jul-11
Screw
bolt M8x15 steel hot dip galvaniced
56.2
Permitted casing
temperature
Revision: 27-Jul-11
160
put max. (kvar)
M12
Hexagonal nut M12
Toothed lock washer
+2
44 - 2
+2
68 - 2
35 + 1
68 ± 2
51 ± 2
put min. (kvar)
M10
Screw bolt M10 brass blank
Screw
bolt M10
Losses
0.4
to 3-phase
0.5 W/kvar
172Y: (without
3-phase D: Hexagonal
3 x 115.5,nut
3-phase
Y:934
3 xsteel
140.1
3-phase
D: 3W/kvar
x 115.5,
3 x 140.1discharge resistors)
M10 DIN
hot dip
galvaniced
Hexagonal nut M10
Statistical lifeSpring
expectancy
> 130
000 operating h 70
(ESTAdry)
washer wave B10 DIN 137 steelSpring
hot dip
galvaniced
washer
3-phase D: 3 x 331.6, 3-phase Y: 3 x 334.3
3-phase
D:wave
3 x 331.6, 3-phase Y: 3 x 334.3
Hexagonal nut M10 DIN 934 steel hot dip
galvaniced
Slotted
nut IP00
M10 (terminal cover for higher protection class upon request), indoor
Degree of protection
Hexagon thin nut M10 DIN 439 A2
Screw bolt M8 x 15
Ambient temperature 30
category
-25 / D (max. 30
55 °C), (-40 / D on request)
pacitance min. (μF)
pacitance max. (μF)
25
25
M10
PhMKDg..., Trian
Vishay ESTA
+2
44 - 2
es
+1
Voltage max. (V)
Capacitance min. (μF)
15.8
Technology
+2
44 - 2
Slotted
nut M10
60831-1
+ 2, 3-phase
EN 60831-1
UL810
LATEST
Capacitance max. (μF) MKP, IEC
D:
3-phase
Y:EDITION
3 x 334.3
3-phase D:
Technology
metallized
polypropylene
film3+x2,331.6,
MKP,
metallized
polypropylene
film3 x 331.6, 3-phase Y: 3 x 334.3
STANDARDS
Screw bolt M8 x 15
• Harmonic
trap (e.g.
converter)
ULfrequency
/ ULCmetallized
FILEdrives,
# E97723
MKP, metallized
polypropylene
film UPS,
MKP,
polypropylene
film
Output
min.
(kvar)
30
30
Voltage max. (V)
1000 8 h daily)
1000
1000
• Pole
- mounted PFC Ucn + 10 % (up to1000
Ucn + 15 % (up to 30 min daily)
Overvoltages
Output
max.
(kvar)
56.2
56.2
Capacitance min.3-phase
(μF) D: 3 x 115.5, 3-phase Y: 3 3-phase
3 x 115.5,
3-phase
Y: 3
x
x 115.5,
3-phase Y: 3 x 140.1
U
to 53-phase
min,
only
times3-phase
in the lifeD:of3 the
capacitor)
x 140.1 D:
3-phase
3 x(up
115.5,
Y:140.1
3200
x 140.1
cn + 20D:%
(in accordance with the above
standards)
Ucn + 30 % (up to 1 min, only 200 times in the life of the capacitor)
Capacitance max.3-phase
(μF) D: 3 x 331.6, 3-phase Y: 3 3-phase
3 x 331.6,
3-phase
Y: 3 x
3-phase D: 3 x 331.6, 3-phase Y: 3 x 334.3
x 334.3 D:
3-phase
D: 3 xrefer
331.6,to
3-phase
Y:334.3
3and
x 334.3
Please
also
“Terms
Definitions”.
www.vishay.com
Document Number: 13007