Reseller
www.seura.com
1.800.95.SEURA
PH. 920.857.9069
FAX 920.857.9490
Sales Order / Inv. Number
Item and Description
Date Created
12 JUN 2012
Revised Date
-
S-S-4536-NA-SM-LU.3
45'' (W) x 36'' (H) Standard Surface-Mounted Lighted Mirror with "Lumin" Etching Design
45"
1
2 2"
2"
1
2 2"
1" LIFT-OFF CLEARANCE REQUIRED
1
3 2"
ETCHED
GLASS
AREA
36"
29"
1
3 2"
SIGNATURE:
NOTE: PLEASE SIGN AND DATE THIS PAGE BEFORE RETURNING TO SEURA. ONLY THIS PAGE NEEDS TO BE
RETURNED. BY RETURNING THIS SHEET, YOU ARE AGREEING TO ALL DIMENSIONS SHOWN ON ALL DRAWING
SHEETS. FOR CUSTOM UNITS, WE WILL NOT START THE BUILD PROCESS WITHOUT AN AUTHORIZED SIGNATURE.
FOR DRAWINGS THAT REQUIRE REVISIONS: SEND THE REVISIONS TO SEURA ON THE ORIGINAL DRAWINGS.
DO NOT SIGN UNTIL ALL REQUIRED DIMENSIONS ARE VERIFIED AND ACCEPTED.
AFTER THE DRAWINGS ARE UPDATED, A REVISED DRAWING PACKAGE WILL BE RE-SENT FOR SIGNATURE.
DATE:
DIMENSIONS ARE IN INCHES
TOLERANCES
FRACTIONAL 1/8 [3mm]
ANGULAR: MACH 1.0
ANGULAR: BEND 1.0
TWO PLACE DECIMAL .03 [.8mm]
THREE PLACE DECIMAL .015 [.4mm]
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DOCUMENT IS THE SOLE
PROPERTY OF THE MANUFACTURER.
ANY REPRODUCTION IN PART, OR AS
A WHOLE, WITHOUT THE WRITTEN
PERMISSION OF MANUFACTURER, IS
PROHIBITED.
SHEET 1
SIGNATURE
AND DATE
REQUIRED
LIGHTING SPECIFICATIONS
T5 HIGH OUTPUT BULBS
2X 39W BULBS, 3500 INITIAL LUMENS EACH
3000K COLOR TEMPERATURE
35,000 HRS RATED LIFE
BALLAST SPECIFICATIONS
INSTANT START
120VAC, 50/60 HZ
NON-DIMMABLE
REQUIRES GFCI
INTERLOCKING
BRACKETS
WALL SURFACE
JUNCTION BOX
(BY OTHERS)
FIELD WIRING
CONNECTION
FIXTURE DISCONNECT
.88" KNOCKOUT FOR
1/2" CONDUIT
DIMENSIONS ARE IN INCHES
Item
S-S-4536-NA-SM-LU.3
Sales Order / Inv. Number
Date Created
12 JUN 2012
Revised Date
-
TOLERANCES
FRACTIONAL 1/8 [3mm]
ANGULAR: MACH 1.0
ANGULAR: BEND 1.0
TWO PLACE DECIMAL .03 [.8mm]
THREE PLACE DECIMAL .015 [.4mm]
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DOCUMENT IS THE SOLE
PROPERTY OF THE MANUFACTURER.
ANY REPRODUCTION IN PART, OR AS
A WHOLE, WITHOUT THE WRITTEN
PERMISSION OF MANUFACTURER, IS
PROHIBITED.
SHEET
2
INSTALLATION INSTRUCTIONS:
•
•
•
•
•
Verify all on-site conditions.
Mark the fastener locations onto
the wall surface using dimensions
from this drawing.
Place toggle bolt anchors into wall
surface following instructions from
fastener packet.
Place the electrical housing against
the wall and secure using the toggle
bolt screws.
Hang mirror onto electrical housing,
making sure the brackets are fully
interlocked and the mirror is
secure.
Note:
•
It is recommended to secure the
bracket fasteners into the framing
members of the wall when possible.
•
Due to desired placement of the
unit, it may not be possible to use
the framing members for mounting.
In this case, use the supplied toggle
bolts into minimum ½-inch thick
drywall.
•
Directions for installing the toggle
bolts are included in the fastener
packet.
45"
MIRROR
OUTLINE
7
6 8"
1
31 4"
1
1 2"
5
5 8"
FIELD WIRING
CONNECTION
•
•
•
JUNCTION BOX
(BY OTHERS)
3
25 16"
OPEN
TO WALL
3
31 4"
36"
.88" KNOCKOUT FOR
1/2" CONDUIT
FIELD WIRING CONNECTIONS:
•
7
6 8"
Strip insulation back .43 to .51
inches.
Accepts AWG 16 - 12 solid.
Accepts AWG 16 - 12 stranded up
to 19 strands max.
Color Code: white - neutral
black - line voltage
green - ground
1
5 4"
3
2 4"
1
29 2"
OPEN
TO WALL
3
7 4"
3
7 4"
DIMENSIONS ARE IN INCHES
Item
S-S-4536-NA-SM-LU.3
Sales Order / Inv. Number
Date Created
12 JUN 2012
Revised Date
-
TOLERANCES
FRACTIONAL 1/8 [3mm]
ANGULAR: MACH 1.0
ANGULAR: BEND 1.0
TWO PLACE DECIMAL .03 [.8mm]
THREE PLACE DECIMAL .015 [.4mm]
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DOCUMENT IS THE SOLE
PROPERTY OF THE MANUFACTURER.
ANY REPRODUCTION IN PART, OR AS
A WHOLE, WITHOUT THE WRITTEN
PERMISSION OF MANUFACTURER, IS
PROHIBITED.
SHEET
3