CUSTOM OPTIONS
CUSTOM
OPTIONS
The following options are available and are to be added to the custom program pricing.
A: Detachable Banjo
L
Support bracket for detachable banjo.
B: Banjo
(inside radius ¾", outside radius ¼")
C:
D:
E
F:
Angle
Radius
Notch
Cutout for Drop-In Bowl
(order must include actual bowl template)
G: Cutout for Undermount Bowl
(order must include actual bowl template)
(includes mounting bolts)
H: Cut off end of top (per cut)
I: Two Tone (per bowl)
Custom Tops add Bowl Charge per Bowl and Two Tone Charge per Bowl.
Two Tone available in 22" Standard Tops add Two Tone Bowl Charge.
Price top in deck Color.
For two tone deck/bowl tops the #70 series solid colors are not available.
Order #100 series without veining to achieve a solid look.
Every bowl style is available except Monterey.
J: Matte Finish
Not available in dark colors #'s 114,120, 123, 129, 222, & 232
K: Vessel Bowl / Drain Hole Cut Out
(order must include actual bowl template)
L: Extra Drill (This is a hole in addition to Faucet Drills)
Note: Special edges also available
CUSTOM
COLORS
WHAT IS A CUSTOM COLOR?
Any color not on the current list of colors.
Custom colors add 10% to list prices, plus sample charge for a 12" x 12" x 3/8" Flat Stock (see minimum charge
for 3/8" Flat Stock), plus 10%.
Miniumum order for custom color is $500.00 list, before adding custom color charge and sample charge.
We suggest making a sample for your customer's approval.
Custom colors typically adds about two weeks to lead time.
WHAT IS A REVERSED COLOR?
Most of the standard marble colors have a particular Base color, with White Veining. To reverse a color, the Base
color is white, while the Veining Color is any of the colors in the standard marble color line. Reversed colors are considered
to be Custom Colors.
SPECIAL SHAPE CUSTOM
VANITY TOPS
L-Shape
Inside Corner
Outside Corner
Bowl Style: See Bowl Styles for Availability
Front Edge: Square, or Special Edge (Special Edge additional charge)
Side Edge: Square, or Special Edge (Special Edge additional charge)
Note: Maximum size for one piece 84"x144"
We suggest not to butt-joint two tops in order create an "L" or angle top. Please
Consult our office for options on enlarging special shape custom tops;
i.e. Clipped corners, dropped dressing areas, raised vanities, etc.
Most Special Shaped Tops will require a loose Back Splash (STD Height - 4").
Over 4" tall requires an upcharge. Inquire for Quote.
Corner Tops
Bowl Style: See Bowl Styles for Availability
Front Edge: Square, or Special Edge (Special Edge additional charge)
Side Edge: Square, or Special Edge (Special Edge additional charge)
Note: Maximum size for one piece 84"x144"
Most Special Shaped Tops will require a loose Back Splash (STD Height - 4").
Over 4" tall requires an upcharge. Inquire for Quote.
This is minimum size with a Catalina Bowl
SPECIAL SHAPE CUSTOM TOPS
Examples of ways to create an L-Shaped or Angle Top and eliminating the need for a miter or butt joint, on tops that
exceed our 84" x 144" maximum size, or straight tops that exceed 144" in total length.
SPECIAL EDGE TREATMENTS
SPECIAL EDGE TREATMENTS
Vanity Tops Pricing
Coved backsplash tops with special edge treatments can be up to 28½" deep. View our edge
treatments page for availability. Edge treatments are not only available for use on a custom top but can also be
used on flatstock. IE - counter - tub decks, etc. When ordering edge treatments, please order by number.
All edge treatments are priced per lineal inch of edge treatment plus the cost of the custom top or flat stock.
Tops with these edge treatments may have an attached or loose backsplash. These tops are designed so that the bottom
of the edge treatment will set on top of the cabinet. All special edge tops require a custom end splash.
All tops with special edge treatment will add between ¼" and ¾" depending on the style selected.
Side to side measurement is actual size ordered. ORDER AS USUAL.