Prices as of April 27, 2016. Check Web site for most current prices.
Fuji Molded Case Circuit Breakers
Overview
Overview
Company
Information
Terminal Blocks
Power
Distribution
Blocks
Features
Fuji Molded Case Circuit Breakers are
more compact (especially 100A, 125A,
250A frames) than any breakers on the
market, so they take up less space in
control panels.
This product group maintains conformity to all Worldwide standards.
Agency Approvals
• UL listed, MCCB, File: E90584
• UL listed, Accessories, File E93289
• CE marked
• CCC marked
• TUV certified
Standards
• UL 489
• CSA C22.2 No.5
• IEC 60947-2
• EN 60947-2
• GB 14048.2
• JIS C8201-2-1, 2 (ANN.1, 2)
• Thermal-magnetic 15A through 800A
• Suitable for branch circuit protection
• Rated current of 15 to 800A, max 600V
• Standard type and high-interrupting
capacities available in identically sized
breakers
• Shunt Trip, Undervoltage Release and
other accessories available
• Line and load lug terminals included on
all MCCBs
• Auxiliary switch, Alarm switch and
Shunt Trip can be installed in the field
• Door-mounted or flange-mounted, flex
shaft operating handles
• All frame sizes suitable for reverse-feed
applications
• All breakers include mounting hardware
• Terminal covers included for BW125
and BW250 frames. Terminal covers
available for BW400, BW630 and BW800
frames.
Wiring
Accessories
ZIPLink
Connection
System
Multi-wire
Connectors
Sensor Cables
and Connectors
M12 Junction
Blocks
Panel Interface
Connectors
Wiring Duct
Cable Ties
Wire
Bulk
Multi-conductor
Cables
Wire
Management
Products
Power Supplies
DC Converters
Transformers
and Filters
Circuit Protection
Fuji Electric Molded Case Circuit Breakers Technical Specifications
Circuit
Ampere Rating No.
Breaker Type
at 40°C
Poles
BW125JAGU
BW250JAGU
BW400SAGU
BW630RAGU
BW800RAGU
Volts
AC
DC
Type
of
Trip*
Tools
UL 489 Interrupting Ratings
(rms Symmetrical Amperes) (kA)
Volts AC (50/60 Hz)
Volts DC
240
480
600
250**
15-125
3
600
250
N.I.T.U
50
30
10
10
125-250
3
600
250
N.I.T.U
50
30
10
10
250-400
3
480
250
N.I.T.U
50
35
–
10
500-600
3
480
250
N.I.T.U
100
50
–
10
700-800
3
480
250
N.I.T.U
100
50
–
10
Test
Equipment
Enclosures
Enclosure
Climate Control
Safety: Electrical
Components
Safety: Protective
Wear
*Note: N.I.T.U denotes non-interchangeable trip unit.
**Note: For DC or 1-phase AC applications, use the two outside poles of the 3-pole circuit breaker
Terms and
Conditions
Book 3 (14.3)
w w w. a u t o m a t i o n d i r e c t . c o m / c i r c u i t- p r o t e c t i o n
Circuit Protection
eCP-7
Prices as of April 27, 2016. Check Web site for most current prices.
Fuji Molded Case Circuit Breakers –
125A Frame
Fuji BW125A series MCCBs are 125 amp
frame, 3-pole, non-adjustable magnetic trip,
molded case circuit breakers (MCCB). The
BW125 series is suitable for reverse feed
applications. Included with each MCCB are
Line and Load-side lug terminals, terminal
covers and mounting hardware. Accessories
are not pre-installed and are sold separately.
BW125JAGU-3P125SB shown
BW125-Frame Series Three-Pole Molded Case Circuit Breakers
Rated Interrupting Capacity (kA)
Part Number
Rated UL489 CAN/CSA IEC60947-2, JIS C
GB14048.2
Price Frequency Current
C22.2 No. 5
8201-2-1 Icu/Ics
Icu/Ics
Ampere Voltage Interrupt Voltage Interrupt Voltage Interrupt
Rating
Capacity
Capacity
Capacity
BW125JAGU-3P015SB $182.00
BW125JAGU-3P020SB $182.00
15
BW125JAGU-3P030SB
BW125JAGU-3P040SB
BW125JAGU-3P050SB
BW125JAGU-3P060SB
BW125JAGU-3P070SB
BW125JAGU-3P075SB
BW125JAGU-3P080SB
BW125JAGU-3P090SB
BW125JAGU-3P100SB
BW125JAGU-3P125SB
$182.00
30
$182.00
40
$182.00
50
$182.00
$182.00
20
50/60 Hz
60
70
$182.00
75
$182.00
80
$182.00
90
$182.00
100
$182.00
125
600V/Y AC
480V/i AC
480V/Y AC
240V AC
250V DC
10 kA
30 kA
30 kA
50 kA
10 kA
500V AC
440V AC
400V AC
380V AC
240V AC
250V DC
15/8 kA
30/15 kA
30/15 kA
30/15 kA
50/25 kA
15/8 kA
400V AC
230V AC
30/15 kA
50/25 kA
Note: SCCR = UL489 interrupting capacity
BW125-Frame Accessory Selection Guide
Part Number
BW9W1SG0
BW9FRG0
BW9FAG0
BW9RGAR
BW9RGAT
Price
Description
$24.00 Field installable auxiliary contact switch, use with BW125 and BW250 series MCCBs. SPDT. 20AWG lead wires, 19.69” long, left side mount only
$49.50 Field installable DC shunt trip, use with BW125 and BW250 series MCCBs; 24 VDC/AC, 20 AWG lead wires 19.69” long, left and right side mount
$49.50 Field installable AC shunt trip, use with BW125 and BW250 series MCCBs; 100-120 VAC, 20 AWG lead wires 19.69” long, left and right side mount
$49.50 Field installable DC undervoltage release, use with BW125and BW250 series MCCBs; 24 VDC, 20AWG lead wires, 19.69” long, left side mount only
Field installable AC undervoltage release, use with BW125and BW250 series MCCBs; 110-130 VAC, 20AWG lead wires, 19.69” long, left side
$49.50 mount only
$50.50 Replacement lugs for BW125-frame MCCBs,. package of 3
BW9SL0CA-3
$45.00 NEMA 12 rotary handle for BW125-Frame. Position indicating; lock-off feature. Shaft length: 0.39”
BW9V0CA
$11.00 NEMA 12 rotary handle shaft for BW9V0CA and BW9V0GA, BW125 and BW250 Frames. Steel shaft length: 6.06” (154 mm)
BW9VSG0
$29.00 NEMA 12 rotary handle shaft for BW9V0CA and BW9V0GA, BW125 and BW250 Frames. Steel shaft length: 24” (610 mm)
BW9VSG0-24
BW9F0CA-15A $237.00 NEMA 12 flexible shaft handle for BW125-Frame. Flange mounted. Lockable. Flex cable shaft length: 4.92’ (1.5m)
BW9F0CA-20A $247.00 NEMA 12 flexible shaft handle for BW125-Frame. Flange mounted. Lockable. Flex cable shaft length: 6.56’ (2m)
$12.00 Lockout attachment, use to lock out BW125 and BW250 series MCCBs. Lock not included.
BW9Q1CA
Note: Short-type terminal covers (gray-white) are supplied as standard.
BW9V0CA
BW9F0CA-15A
BW9FAG0
BW9RGAR
BW9Q1CA
Book 3 (14.3)
eCP-8
Circuit Protection
1 - 8 0 0 - 633 - 0 4 0 5
Prices as of April 27, 2016. Check Web site for most current prices.
Fuji Molded Case Circuit Breakers –
125A● Frame Characteristic Curves
Company
Information
Terminal Blocks
Power
Distribution
Blocks
(Rated current:
15A) 15A
BW125BW125
Rated Current
Wiring
Accessories
Minute
180
120
60
40
ZIPLink
Connection
System
20
Multi-wire
Connectors
10
6
4
2
Sensor Cables
and Connectors
Max. value
1
40
M12 Junction
Blocks
20
Operating time
Max. total fault
clearing time
Min. value
2
Cable Ties
Wire
150
Rated current
correction ratio (%)
Second
Wiring Duct
Reference temp. 40˚C
1
0.6
0.4
0.2
Instantaneous tripping
characteristic
500A±100A
0.1
0.06
0.04
0.02
0.01
●
Panel Interface
Connectors
10
6
4
1 1.5 2
Bulk
Multi-conductor
Cables
100
Wire
Management
Products
Power Supplies
50
10
3 4 5 6 78 10 15 20 30 405060 80100
Multiple of rated current
0
10
20
30
40
50
DC Converters
Ambient temp. (˚C)
Transformers
and Filters
BW125 (Rated current: 20A)
BW125
Rated Current 20A
Circuit Protection
Minute
180
120
60
40
Tools
Test
Equipment
20
Enclosures
10
6
4
Enclosure
Climate Control
2
Max. value
1
40
Safety: Electrical
Components
10
6
4
2
Min. value
Max. total fault
clearing time
1
0.6
0.4
0.2
0.1
0.06
0.04
0.02
0.01
Safety: Protective
Wear
Reference temp. 40˚C
Instantaneous tripping
characteristic
500A±100A
1 1.5 2
150
Rated current
correction ratio (%)
Second
Operating time
20
Terms and
Conditions
100
50
10
0
10
20
30
40
50
Ambient temp. (˚C)
3 4 5 6 7 8 10 15 20 30 40 506080100
Multiple of rated current
Book 3 (14.3)
w w w. a u t o m a t i o n d i r e c t . c o m / c i r c u i t- p r o t e c t i o n
Circuit Protection
eCP-9
Prices as of April 27, 2016. Check Web site for most current prices.
Fuji Molded Case Circuit Breakers –
125A Frame Characteristic Curves
BW125current:
Rated
Current 30A
BW125 (Rated
30A)
Minute
180
120
60
40
20
10
6
4
2
Max. value
1
40
20
Min. value
2
Second
Max. total fault
clearing time
Reference temp. 40˚C
1
0.6
0.4
150
0.2
Instantaneous tripping
characteristic
500A±100A
0.1
0.06
0.04
0.02
0.01
Rated current
correction ratio (%)
Operating time
10
6
4
1 1.5 2
100
50
3 4 5 6 7 8 10 15 20 30 40506080100
Multiple of rated current
10
0
10
20
30
40
50
Ambient temp. (˚C)
BW125current:
Rated
Current 40A
BW125 (Rated
40A)
Minute
180
120
60
40
20
10
6
4
Max. value
2
1
40
10
6
4
Min. value
2
Max. total fault
clearing time
1
0.6
0.4
Reference temp. 40˚C
150
0.2
Instantaneous tripping
characteristic
500A±100A
0.1
0.06
0.04
0.02
0.01
1
1.5 2
3 4 5 6 7 8 10 15 20 30 40506080100
Multiple of rated current
Rated current
correction ratio (%)
Second
Operating time
20
100
50
10
0
10
20
30
40
50
Ambient temp. (˚C)
Book 3 (14.3)
eCP-10
Circuit Protection
1 - 8 0 0 - 633 - 0 4 0 5
Prices as of April 27, 2016. Check Web site for most current prices.
Fuji Molded Case Circuit Breakers –
125A FrameCharacteristic Curves
Company
Information
Terminal Blocks
Power
Distribution
Blocks
BW125, EW125 (Rated current: 50 - 125A)
BW125
Wiring
Accessories
Current Range 50 -125A
ZIPLink
Connection
System
Minute
180
120
60
40
Multi-wire
Connectors
20
10
6
4
Sensor Cables
and Connectors
M12 Junction
Blocks
Max. value
2
Panel Interface
Connectors
20
Wiring Duct
10
6
4
Min. value
2
Cable Ties
Wire
1
0.6
0.4
Reference temp. 40°C
150
Instantaneous
tripping
characteristic
10 In±20%
0.2
0.1
0.06
0.04
0.02
0.01
Max. total fault
clearing time
Rated current
correction ratio (%)
Second
Operating time
1
40
1.5 2
3 4 5 6 78 10 15 20
30 40 50 60 80 100
Multiple of rated current
Wire
Management
Products
100
Power Supplies
50
1
Bulk
Multi-conductor
Cables
10
0
10
20
30
40
Ambient temp. (°C)
DC Converters
50
Transformers
and Filters
Note: Instantaneous tripping = 10 x (rated current) ± 20%
In = rated current
Circuit Protection
Tools
Test
Equipment
Enclosures
Enclosure
Climate Control
Safety: Electrical
Components
Safety: Protective
Wear
Terms and
Conditions
Book 3 (14.3)
w w w. a u t o m a t i o n d i r e c t . c o m / c i r c u i t- p r o t e c t i o n
Circuit Protection
eCP-11
Prices as of April 27, 2016. Check Web site for most current prices.
Fuji Molded Case Circuit Breakers –
Dimensions
Dimensions
Units: mm [inches]
15 to 125A
BW125A Frame
125 to 250A
BW250A Frame
Book 3 (14.3)
eCP-20
Circuit Protection
1 - 8 0 0 - 633 - 0 4 0 5
Prices as of April 27, 2016. Check Web site for most current prices.
Fuji Molded Case Circuit Breakers –
Products And Accessory Compatibility
Match the Accessories with Fuji Molded Case Circuit Breakers
Part Number
BW9W1SG0
BW9W1SHA
Description
BW9FRG0
BW9FHA-R
X
X
X
X
BW9FHA-A
Shunt Trip 24 VAC/VDC (Mounting both Left and Right sides)
Shunt Trip 24-48 VAC/VDC (Mounting Left side ONLY)
Shunt Trip 100-120 VAC, 100-110 VDC
(Mounting both Left and Right sides)
Shunt Trip 100-280 VAC, 100-220 VDC (Mounting Left side ONLY)
BW9RGAR
BW9RHA-R
BW9RGAT
BW9RHA-1
UnderVoltage Release 24VDC (Left side ONLY)
UnderVoltage Release 24 VAC/VDC (Left side ONLY)
UnderVoltage Release 110-130 VAC (Left side ONLY)
UnderVoltage Release 120-130 VAC, 125VDC (Left side ONLY)
X
X
X
X
BW9SL0CA-3
BW9SL0GA-3
BW9SL1GA-3
Replacement Lugs Kit for 125 Amp frame
Replacement Lugs Kit for 250 Amp frame up to 175A
Replacement Lugs Kit for 250 Amp frame 200A to 250A
X
BW9V0CA
BW9V0GA
BW9VSG0
BW9VSG0-24
BW9V0HA
BW9V0JA
BZ-VS2
BZ-VS2-24
Rotary Handle
Rotary Handle
Optional Shaft for BW9V0CA and BW9V0GA, 6.063”
Optional Shaft for BW9V0CA and BW9V0GA, 24”
Rotary Handle,
Rotary Handle,
Optional Shaft for BW9V0HA and BW9V0JA, 3.48”
Optional Shaft for BW9V0HA and BW9V0JA, H = 24”
X
BW9FAG0
BW125JAGU BW250JAGU BW400SAGU BW630RAGU BW800RAGU
Auxiliary Switch (Mounting Left and right side)
Auxiliary Switch (Mounting Left side ONLY)
X
BW9F0GA-20A
BW9F0HA-15A
BW9F0HA-20A
BW9F0JA-15A
BW9F0JA-20A
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Flange Handle (flex shaft), NEMA 12, 59“ (1.5m) cable,
250 Amp frame
Flange Handle (flex shaft), NEMA 12, 78.7” (2.0m) cable,
250 Amp frame
Flange Handle (flex shaft), NEMA 12, 59“ (1.5m) cable,
400 Amp frame
Flange Handle (flex shaft), NEMA 12, 78.7” (2.0m) cable, 400 Amp
frame
Nema 12 flexible shaft handle for 630A or 800A frame. 59.06”
(1.5m) cable
Nema 12 flexible shaft handle for 630A or 800A frame. 78.74” (2m)
cable
X
X
X
X
BW9BTHA-L3W Terminal Cover for the 400A frame
BW9BTJA-L3W Terminal Cover for the 630A AND 800A frame
BW9Q1CA
BW9QNHA
X
X
X
Handle (flex shaft), NEMA 12, 59“ (1.5m) cable,
BW9F0CA-15A Flange
125 Amp frame
Handle (flex shaft), NEMA 12, 78.7” (2.0m) cable,
BW9F0CA-20A Flange
125 Amp frame
BW9F0GA-15A
X
X
Lockout Attachment 125A and 250A frames
Lockout Attachment 400A, 630A and 800A frames
X
X
X
Internal Accessory Combinations for BW Series
Available configurations
3-pole
Right
Left
Undervoltage trip
Shunt trip
Auxiliary switch
Handle
MCCB
Pole
BW125
BW250
3
BW400
BW630
BW800
3
Auxiliary switch
SPDT
Shunt trip
Undervoltage trip
Auxiliary Switch + Shunt Trip
Undervoltage + Auxiliary Switch
Book 3 (14.3)
eCP-24
Circuit Protection
1 - 8 0 0 - 633 - 0 4 0 5
Prices as of April 27, 2016. Check Web site for most current prices.
Fuji Molded Case Circuit Breakers –
Wire Range Specifications
Company
Information
Terminal Blocks
Power
Distribution
Blocks
Wiring
Wiring
Accessories
• When connecting the wires, follow NEC (National Electric Code, USA) or CEC (Canadian Electrical code Part
1, Canada) instructions.
• Adhere to the allowable number of strands of wire
indicated in the table on the left.
•Two wires cannot be connected together to a single connecting
hole of lug terminal except BW400SAGU-3P400SB.
•Follow the number of strands of wire indicated on the table.
(Wire size and number of wire strands not listed on table can
not be connected)
•Do not solder the end of the wire.
• Use copper wire rated for 75°C for connecting. UL or
CSA approved wire is recommended.
• Tighten the wire connections adequately, as a very large
electromagnetic force will be generated when short circuit current is generated.
•
Perform additional tightening of the terminal screws
periodically.
7
19
37
Rated current
15A to 350A
Rated current 400A
3/0 AWG x 2
19 strands each
Rated current
500A to 700A
Rated current 800A
300 MCM x 3
37 strands each
BW250
BW400
BW630
BW800
M12 Junction
Blocks
Rated
Current (A)
Tightening
Torque
Wire Size
AWG or MCM (mm2) Lug
Terminal*
15
14 AWG (2.1mm2)
20
12 AWG (3.3mm )
30
10 AWG (5.3mm2)
40
8 AWG (8.4mm2)
50
8 AWG (8.4mm2)
60
6 AWG (13.3mm2)
70
4 AWG (21.1mm2)
75
4 AWG (21.1mm2)
80
4 AWG (21.1mm2)
90
3 AWG (26.7mm2)
100
3 AWG (26.7mm2)
125
1 AWG (42.4mm2)
125
1 AWG (42.4mm2)
150
1/0 AWG (53.5mm2)
175
2/0 AWG (67.4mm2)
200
3/0 AWG (85.0mm2)
225
4/0 AWG (107.2mm2)
250
250 MCM (127mm2)
250
250 MCM (127mm2)
300
350 MCM (177mm2)
350
500 MCM (253mm2)
400
3/0 AWGx2 (85.0mm2x2)
282 lb-in
(31.9 N-m)
500
250 MCMx2
600
350 MCMx2
275 lb.-in.
(31.07 N-m)
700
500 MCMx2
800
300 MCMx3
Wire
Wire
Management
Products
Power Supplies
2
DC Converters
Transformers
and Filters
Circuit Protection
51 lb.-in.
(5.8 N-m)
Tools
Test
Equipment
Enclosures
Enclosure
Climate Control
Safety: Electrical
Components
204 lb.-in.
(23 N-m)
Safety: Protective
Wear
Terms and
Conditions
385 lb.-in
(43.5 N-m)
275 lb.-in.
(31.07 N-m)
*Lug terminals are supplied as standard.
Note: Terminals are factory-installed only for BW400, BW630 and BW800 series.
No replacement terminals available.
Book 3 (14.3)
w w w. a u t o m a t i o n d i r e c t . c o m / c i r c u i t- p r o t e c t i o n
Cable Ties
Bulk
Multi-conductor
Cables
Maximum Wire Sizes and Tightening Torque
BW125
Sensor Cables
and Connectors
Wiring Duct
Wire Size AWG or MCM (mm2) Number of Wire Strands
Type
Multi-wire
Connectors
Panel Interface
Connectors
Allowable Wire Specifications for Lug Terminals
14 to 2 (2.1 to 33.6)
1 to 4/0 (42.4 to 107.2)
250 to 500 (127 to 250)
ZIPLink
Connection
System
Circuit Protection
eCP-33
Prices as of April 27, 2016. Check Web site for most current prices.
Fuji Molded Case Circuit Breakers –
Field-mountable Accessories
Company
Information
Terminal Blocks
Power
Distribution
Blocks
Wiring
Accessories
ZIPLink
Connection
System
Defeatable Rotary Handle Operating Mechanisms
Multi-wire
Connectors
BW9V0CA shown
Sensor Cables
and Connectors
Rotary Operating Handles for Fuji MCCBs – Selection Guide
V-type Handle
Breaker V-type
Type
Handle
Price
BW125 BW9V0CA $45.00
BW250 BW9V0GA $45.00
Dimensions
Units: inches [mm]
H: inch(mm)
4.134±0.078
(105±2)
With the optional shaft
(x= 6.102 (155))
M12 Junction
Blocks
With the optional shaft
(x= 24.567 (624))
V-type
Mounting Handle
Max. Mounting Range in which the Max. Mounting Range in which Screw Mass
Depth
hinge with H can
Depth
the hinge with H
lb. (kg)
H: inch(mm)
be installed
H: inch(mm) can be installed
9.843±0.078
(250±2)
5.512 to 9.843
(140 to 250)
28.307±0.078
(719±2)
28.307 - 5.591
(124 - 719)
M4 x 3.35 (85) 1.48 (0.67)
DC Converters
Panel
Door panel cutting
2.677 (68)
MCCB
4-0.591 dia (ø15)
MCCB
handle
C/L
Transformers
and Filters
Handle
C/L
MCCB
Handle C/L
43
3.5
dia
Circuit Protection
0)
Tools
3.071 (78)
4.449 (113)
4.449 (113)
Wire
Management
Products
Power Supplies
• BW9V0CA, BW9V0GA (BW9VSG0, BW9VSG0-24: optional shafts)
(ø9
Test
Equipment
3.071(78)
Load
Panel thickness:
0.047 to 0.126 (1.2 to 3.2)
C
L
Cable Ties
Bulk
Multi-conductor
Cables
125A, 250A Frame V type handle
C
L
Wiring Duct
Wire
Notes: • Handle is an operating mechanism only; not for sealing enclosure door.
• Not available for side mounting
• For BW250 Series only: When mounting a terminal cover, cut away part of it because it hides
the mounting screws for the breaker.
Remove the shaded parts in the figure .
Line
Panel Interface
Connectors
2.559 (65)
H
Enclosures
Note: Align the center of the hole cut in the panel
with the center of the breaker handle.
Enclosure
Climate Control
28.87
(733.4)
1.929 (49)
Safety: Electrical
Components
Handle C/L
Padlock size 0.157 dia to 0.315 dia (ø4 to ø8)
4P 3P
Safety: Protective
Wear
.94
(24.0)
2P
Terms and
Conditions
Door hinge installation area
C/L
0.039 (1)
0.315 (8)
1.929 (49)
1.181 (30)
4.724 (120)
2.362 (60)
1.614
(41)
2.362 (60)
0.591 (15)
X
1.063
(27)
Optional shafts
BW9VSG0
X = 6.102 (155)
BW9VSG0-24
X = 24.567 (624)
1.063 (27)
4.724 (120)
Install the door hinge in the shaded area.
BW9VSG0-24 optional shaft
Breaker and Shaft Assembly
Book 3 (14.3)
w w w. a u t o m a t i o n d i r e c t . c o m / c i r c u i t- p r o t e c t i o n
Circuit Protection
eCP-25
Prices as of April 27, 2016. Check Web site for most current prices.
Fuji Molded Case Circuit Breakers –
Field-mountable Accessories
Company
Information
Terminal Blocks
Power
Distribution
Blocks
Defeatable Flexible Handle Operating Mechanisms
Wiring
Accessories
ZIPLink
Connection
System
Multi-wire
Connectors
Sensor Cables
and Connectors
M12 Junction
Blocks
Panel Interface
Connectors
Wiring Duct
Cable Ties
Wire
BW9F0JA-20A shown
Bulk
Multi-conductor
Cables
Flex Shaft Handles for Fuji MCCBs – Selection Guide
Breaker
Type
Handle Type
BW9F0CA-15A
BW9F0CA-20A
BW9F0GA-15A
BW250
BW9F0GA-20A
BW9F0HA-15A
BW400*
BW9F0HA-20A
BW630*& BW9F0JA-15A
BW800* BW9F0JA-20A
BW125
Price Description
Wire
Management
Products
$237.00 Nema 12 flexible shaft handle for 125A frame. 59.06” (1.5m)cable
Power Supplies
$247.00 Nema 12 flexible shaft handle for 125A frame. 78.74” (2m) cable
$247.00 Nema 12 flexible shaft handle for 250A frame. 59.06” (1.5m)cable
$257.00 Nema 12 flexible shaft handle for 250A frame. 78.74” (2m) cable
$359.00 Nema 12 flexible shaft handle for 400A frame. 59.06” (1.5m)cable
$369.00 Nema 12 flexible shaft handle for 400A frame. 78.74” (2m) cable
$388.00 Nema 12 flexible shaft handle for 630A or 800A frame. 59.06” (1.5m)cable
$399.00 Nema 12 flexible shaft handle for 630A or 800A frame. 78.74” (2m) cable
DC Converters
Transformers
and Filters
Circuit Protection
Tools
Test
Equipment
*Terminal covers for line side and load side included with Flange Disconnects. 2/pk
Enclosures
Enclosure
Climate Control
Flex Handle Specifications
Operating instructions
Frame Size
Mechanical Endurance
(cycles)
Ambient Temperature
Relative Humidity
Protection
Conforming Standards
Environment
• Operating handle facing up, Breaker is in ON position.
• Operating handle facing down, Breaker is in OFF position or is reset.
• Panel door cannot be opened when in ON, OFF or Trip position. In order to open the door, the handle must
be turned toward reset position.
• Release screw is standard. If you want to open a panel door in ON position, please turn the release screw
using flat head screwdriver.
125A frame
250A frame
400A frame
10,000
8,000
6,000
630A/800 frame
6,000
14 to 140F (- 10 to 40°C)
less than 95% RH
NEMA Type12 IP54 (IEC60529)
NFPA 79(2007), ANSI(Lockout), OSHA(1910.147, Lockout/tagout), UL489(cUL)
No excessive dust, smoke, corrosive gases, flammable gases, steam or salt.
Book 3 (14.3)
w w w. a u t o m a t i o n d i r e c t . c o m / c i r c u i t- p r o t e c t i o n
Circuit Protection
eCP-27
Safety: Electrical
Components
Safety: Protective
Wear
Terms and
Conditions
Prices as of April 27, 2016. Check Web site for most current prices.
Fuji Molded Case Circuit Breakers –
Field-mountable Accessories
Dimensions
Units: mm [inches]
BW9F0CA
BW9F0GA
Book 3 (14.3)
eCP-28
Circuit Protection
1 - 8 0 0 - 633 - 0 4 0 5
Prices as of April 27, 2016. Check Web site for most current prices.
Fuji Molded Case Circuit Breakers –
Accessories
Auxiliary Contacts
The auxiliary contacts are accessory contacts for the indication of circuit breaker openclosed or tripped.
Auxiliary Contacts for Fuji MCCBs – Selection Guide
Breaker
Type
BW125
BW250
BW400
BW630
BW800
BW9W1SHA shown
Part Number
Price
Description
BW9W1SG0
$24.00
Auxiliary switch for for 125A and 250A frame. Mounting left and right side
BW9W1SHA
$22.50
Auxiliary switch for for 400A , 630A and 800A frame. Mounting left side ONLY
Ratings of Auxiliary Switches
Standard Type
Rated
Thermal
Current (A)
Breaker Type
BW125, BW250,
BW400 BW630,
BW800
Make/Break Current (A)
Voltage (V)
AC
Res. Load
Ind. Load
24
5
5
48
5
125
250
5
Minimum
Load Current
Voltage (V)
DC
Res. Load
Ind. Load
24
4
3
5
48
2.5
1
5V DC 160 mA
5
3
125
0.4
0.4
30V DC 30 mA
3
2
250
0.2
0.2
Operation of auxiliary switches
Accessory
Handle position
ON
Auxiiary switch
OFF
11/AXcL
Trip
14/AXaL
11/AXcL
14/AXaL
SPDT
(1)
12/AXbL
12/AXbL
Shunt Trips
Shunt Trip is for remote tripping (opening) of crircuit breaker.
Shunt Trips for Fuji MCCBs – Selection Guide
Part Number
BW9FRG0 shown
Price
Description
BW9FRG0
$49.50
Field installable 24 VAC/VDC shunt trip for BW125 and BW250 series MCCB.
Left and right side mounting. Lead wires 20AWG, 19.69” long.
BW9FHA-R
$49.50
Field installable 24/48 VAC/VDC shunt trip for BW400, BW630 and BW800 series MCCB.
Left side mounting only. Lead wires 20AWG, 19.69” long.
BW9FAG0
$49.50
Field installable 100/120 VAC, 100-110 VDC shunt trip for BW125 and BW250 series MCCB.
Left and right side mounting. Lead wires 20AWG, 19.69” long.
BW9FHA-A
$49.50
Field installable 100/240 VAC, 100-220 VDC shunt trip for BW400, BW630 and BW800
series MCCB.Left side mounting only. Lead wires 20AWG, 19.69” long.
Ratings of Shunt Trips
Breaker Type
BW125, BW250
BW400,
BW630, BW800
AC
Voltage (V)
DC
Voltage (V)
VA
Time Rating of Coil
W
24
50
24
50
100-120
50
100-110
50
24-48
2
24-48
2
100-240
3
100-220
3
Operating Time (ms)
Continuous
(with 1 N.O. contact to
prevent coil burnout)
13-21
Continuous
8-20
Note: Allowable operating voltage AC voltage: 85% to 110% of coil rated voltage
DC voltage: 75% to 125% of coil rated voltage
Book 3 (14.3)
eCP-30
Circuit Protection
1 - 8 0 0 - 633 - 0 4 0 5
Prices as of April 27, 2016. Check Web site for most current prices.
Fuji Molded Case Circuit Breakers –
Accessories
Company
Information
Terminal Blocks
Power
Distribution
Blocks
Undervoltage Releases
Wiring
Accessories
Undervoltage Release will trip the circuit breaker when the connected voltage drops to
less than 70% of undervoltage release voltage rating. It will allow the circuit breaker to
close (ON) when voltage is approximately 85% of rated voltage.
ZIPLink
Connection
System
Multi-wire
Connectors
Undervoltage Releases for Fuji MCCBs – Selection Guide
Breaker Type
BW125, BW250
BW125, BW250
BW400, BW630, BW800
BW400, BW630, BW800
Part Number
BW9RGAR
BW9RGAT
BW9RHA-R
BW9RHA-1
Sensor Cables
and Connectors
Price Description
$49.50
Undervoltage Release 24V DC (Left side ONLY)
$49.50
Undervoltage Release 110 to 130 VAC VAC/VDC (Left side ONLY)
$47.50
Undervoltage Release 24 VAC/VDC (Left side ONLY)
$49.50
Undervoltage Release 120 to 130 VAC 125 VDC (Left side ONLY)
M12 Junction
Blocks
Panel Interface
Connectors
Ratings of Undervoltage Trip
Breaker Type
BW125*1
BW250*1
BW400*2
BW630*2
BW800*2
AC
Voltage (V)
DC
Voltage (V)
VA
Wiring Duct
W
–
–
24
5
110 - 130
5
–
–
24
2
24
2
120 - 130
3
125
3
BW9RGAR shown
Cable Ties
Wire
Bulk
Multi-conductor
Cables
Wire
Management
Products
Note: Allowable operating voltage: A
C voltage: 85% to 110% of coil rated voltage
DC voltage: 75% to 125% of coil rated voltage.
Power Supplies
*1 Reset-allowed type: When the breaker handle is in the OFF or RESET state, tripping
does not occur, even if the undervoltage trip coil is not energized.
Turning ON with the undervoltage trip coil not energized causes normal tripping.
*2 Reset-prohibited type: When the undervoltage trip coil is not energized, reset operation cannot reset the tripped breaker to the OFF state.
DC Converters
Transformers
and Filters
Circuit Protection
Tools
Replacement Lugs
Test
Equipment
Enclosures
Enclosure
Climate Control
Replacement Lug Kits for Fuji MCCBs – Selection Guide
Part Number
BW9SL0GA-3 shown
Price
Description
Safety: Electrical
Components
BW9SL0CA-3
$50.50
Replacement lug kit for BW125 series MCCB. 75°C. Cu only
Package of 3
BW9SL0GA-3
$57.00
Replacement lug kit for BW250 series up to 175A MCCB. 75°C. Cu only
Package of 3
Safety: Protective
Wear
BW9SL1GA-3
$62.50
Replacement lug kit for BW250 MCCB series 200A to 250A. 75°C. Cu only
Package of 3
Terms and
Conditions
Note: Terminals are factory-installed only for BW400, BW630 and BW800 series. No replacement terminals
available.
Book 3 (14.3)
w w w. a u t o m a t i o n d i r e c t . c o m / c i r c u i t- p r o t e c t i o n
Circuit Protection
eCP-31
Prices as of April 27, 2016. Check Web site for most current prices.
Fuji Molded Case Circuit Breakers –
Accessories
Terminal Covers
Terminal covers act as guards to shield the
operator from touching live terminations.
They fit either the line or load side.
BW9BTHA-L3W
shown
Terminal Covers for Fuji MCCBs – Selection Guide
Breaker Type
Dimensions inch (mm)
Part Number
Price Description
BW400
BW9BTHA-L3W
Long type terminal cover for Fuji
$49.00 Gray-white
MCCBs. For line side and load side. 2/pk
6.772 (172) 4.331 (110) 3.858 (98)
BW630,
BW800
BW9BTJA-L3W
Long type terminal cover for Fuji
$52.00 Gray-white
MCCBs. For line side and load side. 2/pk
8.268 (210) 6.102 (155) 3.858 (98)
A
B
C
Note: Gray-white short type terminal covers are provided with breakers as standard for 125 and 250 Amp frames.
Dimensions of Terminal Covers: inch (mm)
C
B
A
Breaker
Lockout Attachment
Lockout Attachments for Fuji MCCBs – Selection Guide
Breaker Type
Part Number
Price Description
BW125
BW250
BW9Q1CA
$12.00
Use to lock out BW125 and BW 250 series MCCBs.
Lock not included
BW400, BW630, BW800
BW9QNHA
$29.00
Use to lock out BW400, BW600 and BW800 MCCBs.
Lock not included.
BW9Q1CA shown
Book 3 (14.3)
eCP-32
Circuit Protection
1 - 8 0 0 - 633 - 0 4 0 5