TANTALUM CAPACITORS

advertisement
V I S H AY I N T E R T E C H N O L O G Y, I N C .
TANTALUM CAPACITORS
T25
Solid Tantalum SMD Capacitor, TANTAMOUNT®,
Hi-Rel COTS, Low ESR, Metal Case
KEY BENEFITS
•
•
•
•
•
Hermetically sealed metal case (no moisture sensitivity)
High reliability; burn-in at a minimum of rated DC voltage for a minimum of 40 h
Surge current testing per MIL-PRF-55365 option available
Low ESR
Lead (Pb)-free terminations available (tin/lead terminations are under development)
APPLICATIONS
• Avionics
RESOURCES
• Datasheet: T25 - www.vishay.com/doc?40171
• For technical questions contact tantalum@vishay.com
• Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
PRODUCT SHEET
1/2
VMN-PT0420-1408
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
V I S H AY I N T E R T E C H N O L O G Y,
INC.
T25
www.vishay.com
Solid
Tantalum
SMD
Capacitors TANTAM
Vishay
Sprague
TANTALUM
CAPACITORS
Hi-Rel COTS, Low ESR, Metal Ca
Solid Tantalum SMD Capacitors TANTAMOUNT®,
T25
T25
FEATURES
Hi-Rel COTS, Low ESR, Metal Case
• High reliability; burn-in
www.vishay.com
Vishay Sprague
DC voltage for a minimu
FEATURES
• High reliability;
burn-in at a minimum of rated®®
Solid Solid
Tantalum
SMDSMD
Capacitor,
TANTAMOUNT
,,
Tantalum
Capacitors
TANTAMOUNT
DC voltage for a minimum
of 40 h
• Surge
current
testing
perCase
MIL-PRF-55365
Hi-Rel
COTS,
LowLow
ESR,
Metal
Case
Hi-Rel
COTS,
ESR,
Metal
option available
• Surge current testing
option available
Available
Available
• LowFEATURES
ESR
• Low ESR
• Lead (Pb)-free terminati
(tin/lead terminations ar
• Mounting: surface moun
PERFORMANCE
• Lead (Pb)-freeCHARACTERISTICS
terminations available
• High
reliability;
at a minimum of rated• Material categorization
(tin/lead
terminations
areburn-in
under development)
www.vishay.com/doc?40088
please see www.vishay.
DC voltage -55
for °C
a minimum
Operating Temperature:
to +125 °Cof 40 h
• Mounting: surface mount
Available
(above 85 °C,
voltage current
derating istesting
required)per MIL-PRF-55365Note
• Surge
•
Material
categorization:
for
definitions
of
compliance
*
This datasheet provides
Capacitanceoption
Range:available
22 μF to 330 μF
Available
RoHS-compliant
and/or pa
please see www.vishay.com/doc?99912
Capacitance Tolerance: ± 10 %, ± 20 %
example, parts with lead (Pb
Note
•
Low
ESR
Please
see
the
information/
Voltage Rating: 16 VDC to 50 VDC
* This datasheet provides information about parts that are
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40088
Operating Temperature: -55 °C to +125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 22 μF to 330 μF
Capacitance Tolerance: ± 10 %, ± 20 %
Voltage Rating: 16 VDC to 50 VDC
RoHS-compliant
and/or parts
that are non-RoHS-compliant.
For
• Lead (Pb)-free
terminations
available
example,
parts
withterminations
lead (Pb) terminations
are not RoHS-compliant.
(tin/lead
are under
development)
ORDERING
INFORMATION
T25
PERFORMANCE CHARACTERISTICS
TYPE
Please see the information/tables in this datasheet for details.
050
•D Mounting: 226
surface mount K
E
CASE
CAPACITANCE
CAPACITANCE
DC VOLTAGE
TERMINATION/
ORDERING INFORMATION
• Material categorization:
for definitions
of +85
compliance
CODE
TOLERANCE
RATING AT
°C
PACKAGING
www.vishay.com/doc?40088
(available options a
please see
T25
D
226
K
050
E www.vishay.com/doc?99912
S
A
Operating Temperature: -55 °C to +125 °C
series dependent
CASE
CAPACITANCE
DC VOLTAGE NoteTERMINATION/
RELIABILITY
SURGE
(aboveTYPE
85 °C,CODE
voltage CAPACITANCE
derating is required)
TOLERANCE
RATING AT +85 °C
PACKAGING
GRADE
CURRENT
C = 100 % tin/
See
This
is expressed
± 10 %
This
is expressed
* This
datasheet
providesK =information
about
parts that are
(available options are
OPTION
Capacitance Range: 22 μF to 330 μF
7" (178 mm), reel
Ratings
in pF. The first two
M = ± 20 %
in volts. To complete
RoHS-compliant
series dependent)and/or parts that are non-RoHS-compliant. For
H = 100 % tin/
andexample,
digits
are
the
the
three-digit
block,
Capacitance Tolerance: ± 10 %, ± 20 %
parts with lead (Pb) terminations are not RoHS-compliant.
7" (178 mm), 1/2 re
Case
significant figures.
zeros precede the
Please
see
the
information/tables
in
this
datasheet
for
details.
C
=
100
%
tin/
S
=
40
h
A
=
10
cycles
See16 VThis
is
expressed
K
=
±
10
%
This
is
expressed
Voltage Rating:
to
50
V
DC
DC
E = Sn/Pb solder
Codes
The third is the
voltage rating.
mm),ofreel
burn-in
at +25
°C
Ratings in pF. The first two
M = ± 20 %
in volts. To complete
7" (178 mm) reel (
table 7" (178
number
zeros
A decimal
point is
H = 100
tin/
B = 10
cycles by an “R”
and
digits are the
the three-digit block,
L = Sn/Pb solder
to %
follow.
indicated
7" (178 mm), 1/2 reel
at -55(6R3
°C/ = 6.3 V).
Case
significant figures.
zeros precede the
7" (178 mm), 1/2 ree
ORDERING
INFORMATION
E = Sn/Pb solder/
+85 °C
Codes
The third is the
voltage rating.
7" (178 mm) reel (1)E
C =S10 cycles
number
A decimal point
T25
D table
226of zeros
K
050is
A
L = Sn/Pb solder/
at -55 °C/
to follow.
indicated by an “R”
(1)
7" (178 mm),TERMINATION/
1/2 reel
+85 °C
= 6.3
V).
TYPE
CASE
CAPACITANCE
CAPACITANCE (6R3DC
VOLTAGE
RELIABILITY
SURGE
(before burn-in) CURRENT
CODE
TOLERANCE
RATING AT +85 °C
PACKAGING
GRADE
S = 3 cycles
(available options are
OPTION
at 25 °C
Note
series dependent)
www.vishay.com
Z
=
no
surge
(1) Tin/lead terminations are under development, contact factory for availability.
current
T25
Vishay Sprague
See
This is expressed
K = ± 10 %
Codes
The third is the
22
DIMENSIONS
in inches
[millimeters]
table
number
of zeros
33
to follow.
47
H
100
S = 40 h
burn-in
35 V 1/2 reel
7" (178 mm),
E = Sn/Pb solder/
7" (178 mm) reel (1)
L = Sn/Pb solder/
7" (178 mm), 1/2 reel (1)
50 V
in inches
[millimeters]
H = 100 % tin/
voltage rating.
A decimal point is
indicated by an “R”
(6R3 = 6.3 V).
68
C = 100 % tin/
7" (178 mm), reel
This is expressed
NoteRatings
in pF.CASE
The first
two
M = ± 20 %
in volts. To complete
RATINGS AND
CODES
DIMENSIONS
(1) Tin/lead terminations are under development, contact factory for availability.
and
digits are the
the three-digit block,
μF
16
V
20
V
25 V
Case
significant figures.
zeros precede
the
D
D (1)
PD
W
0.326
[8.5]
P
0.275 ± 0.008
[7.0 ± 0.2]
TW
0.098 ± 0.008
[2.5 ± 0.2]
± 0.2]
Revision:[7.4
16-Jun-14
TW
P
0.291 ± 0.008
[7.4 ± 0.2]
0.197 ± 0.008
[5.0 ± 0.2]
Revision: 16-Jun-14
1
For technical questions, contact: tantalum@vishay.com
VOLTAGEHEREIN
CODE AND THIS DOCUMENT
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V
CODE
H
W
TW
TW
16
C
MARKING
20
25
L
Capacitance
Voltage
Year
CASE CODE
L (MAX.)
D
0.326
[8.5]
Week
D
P
P
35
W
50
0.275 ± 0.008
[7.0 ± 0.2]
E
V
H
0.291 ± 0.008
[7.4 ± 0.2]
P T
0.098 ± 0.008
[2.5 ± 0.2]
TW
0.197 ± 0.008
[5.0 ± 0.2]
STANDARD RATINGS
MAX. DCL
MAX. DF
MAX. ESR
MAX.
RIPPLE
AT +25 °C
Document
Number: 40171
1 AT +25 °C
VMN-PT0420-1408
AT +25 °C
100 kHz
100 kHz
(μA)
(%)
For technical questions, contact:
tantalum@vishay.com
IRMS (A)
(m)
THIS DOCUMENT IS SUBJECT TO CHANGE
WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
16 VDC AT +85 °C; 10 VDC AT +125 °C
THIS DOCUMENT IS SUBJECT TO CHANGE
THE
PRODUCTS
DESCRIBED
HEREIN
AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
AREWITHOUT
SUBJECTNOTICE.
TO SPECIFIC
DISCLAIMERS,
SET FORTH
AT www.vishay.com/doc?91000
D (1)
T25D337(1)016(2)(3)(4)
52.8
14
180
DISCLAIMERS, SET FORTH AT330
www.vishay.com/doc?91000
Revision:CAPACITANCE
16-Jun-14
PRODUCT SHEET
(μF)
CASE CODE
PART NUMBER
0.09
[2.
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED
ARE SUBJECT TO SPECIFIC
DISCLAIMERS,
SET FORTH AT www.vishay.com
Document
Number: 40171
DIMENSIONS in inches [millimeters]
Revision 16-Jun-14
L
L (MAX.)
P
Note
330
D (1)
CASE
CODE
L (MAX.)
W
H
(1) Tin/lead terminations are under development, contact factory for availability.
0.326
0.275 ± 0.008
0.291 ± 0.008
Note
D
(1) Preliminary values, contact factory
[8.5] for availability. [7.0 ± 0.2]
W
TW
(1)
CASE CODE
L
H
D (1)
TW
150
220
D
A = 10 cycles
at +25 °C
B = 10 cycles
at -55 °C/
+85 °C
C = 10 cycles
TW at -55 °C/
+85 °C
(before burn-in)
S = 3 cycles
P °C
at 25
Z = no surge
H
current
2/2
20 VDC AT +85 °C; 13 VDC AT +125 °C
Download