Type
Catalog #
Project
Comments
Date
Prepared by
OMR-P,
MicroSet Infrared
Recessed Mount
PIR
Activated
MicroSet
• No adjustments necessary at installation
• Continuous, real-time, self-adjusting
sensitivity and time delay
Adjustable ambient light level feature
Segmented Fresnel lens provides optimum sensitivity and performance
Open collector output to switch up to 10 switchpacks
• DIP Switch override allows time delay
to be locked at 30 minutes
• Manual ON/OFF feature when wired to
normally open momentary pushbutton
• DIP Switch selectable feature prevents
unnecessary “lights ON” following
power sweeps in facilities with
computer control systems
• NEMA WD7 Standard robotic method
utilized to verify coverage patterns
Specifications:
Technology: Passive Infrared (PIR)
Power Requirements: 10-30 VDC from Greengate
Switchpack or Greengate system. Maximum current
needed is 25mA per sensor
Output:
• Open collector output to switch up to ten
Greengate Switchpacks.
• Isolated Form C Relay in (-R) models.
• Isolated Form C Relay Ratings: 1A 30 VDC/VAC
Time Delays: Self adjustable from 10 min. to 30 min.
Ambient Light Features: Adjustable from 10 to 300
Foot Candles
Operating Environment:
• Temperature: 60°F - 80°F (15°C - 26°C)
• Relative humidity: Less than 95%, non-condensing
• For indoor use only
Housing: Medium impact injection molded housing.
ABS resin complies with UL94V0. Paintable off-white.
Size: 3” diameter, 1.43” deep
LED lamp: Red LED
Warranty: Five year
Lighting Sweep
When sensors are used in conjunction with computer lighting sweep systems, you MUST
enable the Lighting Sweep feature by turning DIP Switch 2 ON. Enabling this feature prevents
an unnecessary “lights ON” following the computer power-on sweep.
Overview
The MicroSet Passive Infrared ceiling sensors can be used individually or in
combination to provide lighting control and integration with HVAC control throughout
a building. The MicroSet technology contained within the line of MicroSet Passive
Infrared ceiling sensors continuously self-adjusts sensitivity and time delay
automatically and immediately in response to occupant behavior. There is no need
for time consuming manual adjustments or to “learn” behavior patterns over
extensive periods of time.
Operation
The sensor uses PIR technology to monitor a room for occupancy. Its segmented
Fresnel lens divides the field of view into detector zones, and detects the changes in
temperature that are created when a person, or part of a person as small as a hand,
passes into or out of a detector zone. The lights will remain ON as long as the
sensor detects movement through the detector zones. When no motion is detected,
lights are switched OFF following a preset time delay. The MicroSet Passive Infrared
ceiling sensor has an ambient light level sensor. Using the DIP Switches located on
the back of the unit, the user can select the ambient light level above which artificial
light is not required. If ambient light is above this level when motion is detected, the
sensor will keep the lights OFF until the ambient light falls below this level. If this level
is reached while the lights are ON, the sensor will switch the lights OFF.
Applications
offices
storage areas
hallways (refer to coverage pattern)
conference rooms
common areas
other indoor
office spaces
Ordering
Mounting
Features
OMR-P-0450-R
450 sq.ft.
Recessed
w/BAS Relay & Daylight Sensor
OMR-P-1200-R
1200 sq.ft.
Recessed
w/BAS Relay & Daylight Sensor
Catalog #
Recommended Room Size
UL Listed
www.coopercontrol.com
203 Cooper Circle
Peachtree City, GA 30269
P: 800-553-3879
F: 800-954-7016
Occupancy Sensors - Ceiling Mount
• Recessed flush mounted unit offers
greater architectural aesthetic appeal
OMR-P, MicroSet Infrared Recessed Mount
Wiring Diagrams
(Use GMDS Switch Only in
Single Sensor Applications)
Coverage
OMR-P-0450-R
OMR-P-1200-R
Maximum Mounting Height- 12ft.
Maximum Mounting Height- 12ft.
Mounting
www.coopercontrol.com
203 Cooper Circle, Peachtree City, GA 30269
P: 800-553-3879 F: 800-954-7016
ACC120036
Cooper Controls, Greengate, Novitas, Yes Box, PCI Lighting Control Systems, VisionTouch, VisionSwitch,
MicroSet, Digita, ControlKeeper, LiteKeeper, TracKeeper, IntelliRelay are valuable trademarks of Cooper
Industries in the U.S and other countries. You are not permitted to use Cooper Trademarks without the
prior written consent of Cooper Industries.