109
Alarm Management
RMP
Remote Alarm Panel
The remote alarm panels are designed to
interface with the TITAN Products range of
alarm integrators.
The RMP incorporates an audible and
visual (LED) indication when an alarm is
present with a push button to mute the
audible alarm. The RMP is built on a single
gang plate for flush or surface mounting.
The standard plate finish is white with other
plate finishes available on request.
Specification
Material:
White plastic single gang plate
Input / Supply:
24V AC / DC or 240V AC
Output:
Buzzer or LED
Power Consumption:
30mA max.
LED indication:
On “Alarm”
Operating Temperature:
-10 to + 40ºC
Terminals:
1.0mm
Dimensions:
82mm high, 80mm wide, 30mm deep
Product Code: See Below
Product Codes
Connections
Product Code
Product Type
RMP/24
24v Supply with delay timer
RMP/240
Supply
240v Supply with delay timer
Other voltages available on request
RMP/24 & 240 with delay timer
For use will AIM Alarm Integrators