Low ESR Capacitors
www.lowESR.com
-
Solid Aluminum Electrolytic Capacitors
Hybrid Electrolyte (Solid & Liquid) Aluminum Electrolytic Capacitors
Liquid Electrolyte Aluminum Electrolytic Capacitors
Polymer Cathode & MnO2 Cathode Tantalum Electrolytic Capacitors
Ceramic Chip Capacitors (MLCC)
NIC Components Corp.
www.niccomp.com
Contents:
Introduction …………………………………………………………… Page 1
Product Data Sheets ………………………………………………….. Pages 2 ~ 24
Sales Channel ………………………………………………………….. Page 25
LOW ESR CAPACITORS:
(SMT) Surface Mount Solid Electrolyte Aluminum Electrolytic Capacitors:
NSP Series, Flat Chip (7343 size) …………………………….. Page 2 & 3
NSPZ Series, V-Chip ……………………………………………. Page 4 & 5
(SMT) Surface Mount Hybrid Electrolyte Aluminum Electrolytic Capacitors:
NSPE Series, V-Chip ………………………………………….... Page 6 & 7
(SMT) Surface Mount Liquid Electrolyte Aluminum Electrolytic Capacitors:
NACZ Series, V-Chip ………………………………………….... Page 8 & 9
NACZF Series, V-Chip …………………………………….….... Page 10
(SMT) Surface Mount Tantalum Electrolytic Capacitors:
Polymer Cathode
NTP Series, Flat Chip, EIA Sizes …………………………...... Page 11 & 12
MnO2 Cathode
NTC-L Series, Flat Chip, EIA Sizes ………………..………… Page 13 & 14
(SMT) Surface Mount Multilayer Ceramic Chip Capacitors (MLCC):
NMC Series, X7R Dielectric, EIA Sizes …………………….. Page 15 & 16
(LD) Radial Leaded Liquid Electrolyte Aluminum Electrolytic Capacitors:
NRSG Series ………………………………………………….... Page 17 & 18
NRSX Series ………………………………………………….... Page 19 ~ 24
NIC Components Corp.
www.niccomp.com
Introduction:
Low ESR capacitors come to the fore
There is a rapidly increasing demand for low equivalent series resistance (ESR) capacitors in a small case,
surface mount format. But what exactly is ESR, why is it important and what products are on offer to satisfy the
market's hunger for these devices?
What is ESR?
ESR is an abbreviation for Equivalent Series Resistance, the characteristic representing the sum of resistive
(ohmic) losses within a capacitor. While ESR is undesirable, all capacitors exhibit it to some degree. Materials and
construction techniques used to produce the capacitor all contribute to the component's ESR value. ESR is a
frequency dependent characteristic, so comparison between component types should be referenced to same
frequency. Industry standard reference for ESR is 100kHz at +25°C. Power dissipation within the capacitor, and
the effectiveness of the capacitor's noise suppression characteristics will be related directly to the ESR value.
Why do we need low ESR?
An industry wide trend towards lower voltage, higher current circuit design, fuelled by lower voltage silicon
devices is causing designers to specify capacitors with minimal ESR. Higher levels of functionality in today's
designs mean that despite voltage levels falling, circuit power levels have not dropped accordingly. Ohms law tells
us, in very simple fashion, that at the same power dissipation level, lower voltage operation will mean higher
current levels. This greatly increases the demands on the power management circuit (power supply or DC/DC
converter) to deliver energy during periods of high current load stepping. Lower voltage circuit operation also
imposes greater restrictions upon the output voltage variation levels. The output capacitors or capacitor bank,
used in the power management circuit, need to exhibit low ESR characteristics. Ripple voltage (noise) on the
output supply voltage will be directly proportional to the ESR of the capacitors used. By considering the formula:
Vr = I x R, where Vr is the ripple voltage and R is the ESR, we can see that if the current (I) increases from, say,
4A to 20A then the ripple voltage will also increase by a factor of five. Increased ripple voltage (Vr) cannot be
tolerated in todays and next generation designs. This is driving the demand for lower ESR capacitors.
What's on Offer?
The high capacitance values (typically greater than 100uF) that are needed to supply energy to the circuit during
high load current stepping, are most often achieved through the use of multiple SMT electrolytic capacitors.
Surface mount devices are often preferred to leaded parts as they simplify PCB assembly and allow closer
component placement. Low ESR SMT electrolytic capacitors mainly fall into four categories. Liquid electrolyte,
vertical can chip aluminum electrolytic capacitors offer the highest values of capacitance and low ESR. They tend
to be low cost, but have case sizes that are large compared to other constructions.
Solid electrolyte, resin encapsulated flat chip aluminum electrolytic capacitors feature reduced ESR, very high
ripple current ratings and reduced size at a higher cost. Solid 'dry' electrolyte also greatly extends the operational
life of the component when used at high temperature. Solid electrolyte, resin encapsulated flat chip MnO2 cathode
tantalum electrolytic capacitors again offer low ESR. They are produced with a manganese dioxide cathode
construction. Solid electrolyte, resin encapsulated flat chip polymer cathode tantalum electrolytic capacitors are
available as ultra-low ESR versions. These are produced using a specialty polymer cathode construction. The
Standard manganese dioxide cathode (MnO2) being replaced by a highly conductive polymer (polypyrrole)
cathode that considerably reduces ESR. Indeed, the conductivity of polypyrrole is more than 100 times that of
manganese dioxide.
Circuit designs incorporating lower voltage semiconductors and ICs are driving increasing demand for better and
lower ESR capacitors. SMT low ESR type electrolytic capacitors offer the combined solution of high capacitance,
to supply energy during high-speed load stepping, and low ESR to reduce the output filter ripple (noise) voltage to
meet the needs of today's and tomorrow's power management design challenges.
Reprint of article from Electronic Product News,
September 2001
NIC Components Corp.
www.niccomp.com
Page 1
Surface Mount Specialty Polymer Solid Aluminum
Electrolytic Capacitors
NSP Series
FEATURES
• VERY LOW ESR AND HIGH RIPPLE AT 100KHZ
• FLAT TOP, LOW PROFILE (1.1MM HEIGHT), RESIN PACKAGE
• REPLACES MULTIPLE TANTALUM CHIPS IN HIGH CURRENT
..POWER SUPPLIES AND VOLTAGE REGULATOR APPLICATIONS
• FITS EIA (7343) “D” AND “E” TANTALUM CHIP LAND PATTERN
• COMPATIBLE WITH REFLOW SOLDERING
EX
SURFACE MOUNT
CHARACTERISTICS
R a t e d Vo l t a g e R a n g e
2.0 ~ 16V DC
Rated Capacitance Range
2.2 ~ 270µF
O p e r a t i n g Te m p e r a t u r e R a n g e
- 4 0 ~ 1 0 5 oC
C a p a c i t a n c e To l e r a n c e
PA
E
ND
D
+/-20% (M)
Max. Leakage C urrent (µA)
A f t e r 2 M i n u t e s ( + 2 0 OC )
2 ~ 4Vdc
0.06CV
6.3 ~ 16V dc
0 .04 C V o r 3 µ A , w hic heve r is gre ate r
D5, D2
0.06
M a x . Ta n δ , 1 2 0 H z , + 2 0 o C
D3, D4
0.10
H i g h Te m p e r a t u r e L o a d L i fe
Capacitance Change
1 0 0 0 H o u r s A t + 1 0 5 oC A t
Ta n δ
W ith in + /-1 0 % o f in it ia l m e a s u r e d va lu e
Less than specified m ax. value
Rated W VD C
Leakage Current
Less than specified m ax. value
D a m p H e a t Te s t
5 0 0 H o u r s A t + 6 0 oC a t
90~95%RH
At R ated W V DC
Capacitance Change
6 . 3 V- 1 6 V W i t h i n - 2 0 % / + 5 0 % o f i n i t i a l m e a s u r e d v a l u e
4V
2V
W ithin -20% /+60% of initial m easured value
W ithin -20% /+70% of initial m easured value
Ta n δ
Less than 200% of specified m ax. value
Leakage Current
Less than specified m ax. value
STANDARD PRODUCTS AND SPECIFICATIONS
WV
C ap.
M ax. LC
(V d c )
(µ F )
(µ A )
N IC P a r t N u m b e r
Ta n δ
M a x . R ip p le C u r r e n t
+ 1 0 5 oC & 1 0 0 K h z (m A )
M ax. ESR
+ 2 0 °C & 1 0 0 K h z (Ω )
H e ig h t
H + 0 .1
NSP680M 2D5TR
2 .0
68
8 .1
0 .0 6
1600
0 .0 3 5
1 .1
NSP101M 2D2TR
2 .0
100
1 2 .0
0 .0 6
1800
0 .0 2 5
1 .8
NSP181M 2D3TR
2 .0
180
2 1 .6
0 .1 0
2000
0 .0 1 8
3 .1
NSP271M 2D4TR
2 .0
270
3 2 .4
0 .1 0
3000
0 .0 1 5
4 .2
N S P 8 2 0 M 2 .5 D 2 T R
2 .5
82
1 2 .3
0 .0 6
1800
0 .0 2 5
1 .8
N S P 1 5 1 M 2 .5 D 3 T R
2 .5
150
2 2 .5
0 .1 0
2000
0 .0 1 8
3 .1
N S P 2 2 1 M 2 .5 D 4 T R
2 .5
220
3 3 .0
0 .1 0
3000
0 .0 1 5
4 .2
NSP390M 4D5TR
4 .0
39
9 .3
0 .0 6
1600
0 .0 3 5
1 .1
NSP560M 4D2TR
4 .0
56
1 3 .4
0 .0 6
1800
0 .0 2 5
1 .8
NSP121M 4D3TR
4 .0
120
2 8 .8
0 .1 0
2000
0 .0 1 8
3 .1
NSP181M 4D4TR
4 .0
180
4 3 .2
0 .1 0
3000
0 .0 1 5
4 .2
N S P 1 0 0 M 6 .3 D 2 T R
6 .3
10
3 .0
0 .0 6
1000
0 .0 6
1 .8
N S P 2 2 0 M 6 .3 D 2 T R
6 .3
22
5 .5
0 .0 6
1300
0 .0 4 5
1 .8
N S P 3 3 0 M 6 .3 D 5 T R
6 .3
33
8 .3
0 .0 6
1600
0 .0 3 5
1 .1
N S P 4 7 0 M 6 .3 D 2 T R
6 .3
47
1 1 .8
0 .0 6
1600
0 .0 2 5
1 .8
N S P 1 0 1 M 6 .3 D 3 T R
6 .3
100
2 5 .2
0 .1 0
2000
0 .0 1 8
3 .1
N S P 1 5 1 M 6 .3 D 4 T R
6 .3
150
3 7 .8
0 .1 0
3000
0 .0 1 5
4 .2
NSP8R2M 8D2TR
8
8 .2
3 .0
0 .0 6
1000
0 .0 6 0
1 .8
NSP150M 8D2TR
8
15
4 .8
0 .0 6
1300
0 .0 4 5
1 .8
N S P 220M 8D 5TR
8
22
7 .0
0 .0 6
1600
0 .0 3 5
1 .1
N S P 330M 8D 2TR
8
33
1 0 .5
0 .0 6
1600
0 .0 2 5
1 .8
N S P 680M 8D 3TR
8
68
2 1 .7
0 .1 0
2000
0 .0 1 8
3 .1
N S P 101M 8D 4TR
8
100
4 8 .0
0 .1 0
3000
0 .0 1 5
4 .2
N S P 4 R 7 M 1 2 .5 D 2 T R
1 2 .5
4 .7
3 .0
0 .0 6
1000
0 .0 8 0
1 .8
N S P 1 0 0 M 1 2 .5 D 2 T R
1 2 .5
10
4 .0
0 .0 6
1000
0 .0 6 0
1 .8
N S P 1 5 0 M 1 2 .5 D 2 T R
1 2 .5
15
6 .0
0 .0 6
1300
0 .0 5 0
1 .8
N S P 2 2 0 M 1 2 .5 D 2 T R
1 2 .5
22
8 .8
0 .0 6
1600
0 .0 4 0
1 .8
N S P 2R 2M 16D 2TR
16
2 .2
3 .0
0 .0 6
1000
0 .1 1 0
1 .8
NSP4R7M 16D2TR
16
4 .7
3 .0
0 .0 6
1000
0 .0 8 0
1 .8
NSP6R8M 16D2TR
16
6 .8
4 .4
0 .0 6
1000
0 .0 7 0
1 .8
NSP8R2M 16D2TR
16
8 .2
5 .2
0 .0 6
1000
0 .0 6 0
1 .8
PART NUM BERING SYSTEM
NSP 100 M 12.5 D2 TR
®
NIC COMPONENTS CORPORATION
REV. 99-8(1)
Series
Tape & Reel
Case Size (D2 ~ D5)
W orking Voltage (Vdc)
Cap. Tolerance (M =20% )
st
rd
Cap. Code ( µ F), 1 two digits significant, 3 is no. of zeros
Page 2
Surface Mount Specialty Polymer Solid Aluminum
Electrolytic Capacitors
VOLTAGE CODES
DIMENSIONS (mm)
Case Code
L +0.4
W +0.3
D2- D5
7.3
4.3
H
W1 +0.2
see
specifications
2.4
table
S +0.3
1.3
➛
➛
W1
Date Code
Code
D
2 .5 V D C
E
6 .3 V D C
J
8VDC
K
1 2 .5 V D C
16VDC
A
C
Capacitance (µF)
10
➛
64721
SURFACE MOUNT
➛
➛
L
PART MARKING
Vo lta g e
2 .0 V D C
J
➛
➛
RECOMMENDED REFLOW SOLDERING PROFILE
RECOMMENDED LAND PATTERNS (mm)
C
D2-D5
2.8
4.0
8.8
➛
A
➛
➛
C
➛
➛
Please note the NSP series will fit on
standard “D” and “E” size (7343)
tantalum chip capacitor land patterns
➛
➛
240oC Max.
250
COMPONENT SURFACE TEMP. (oC)
B
➛
A
30 Seconds Max.
200
160oC PREHEAT
150
50 Typ.
100
NATURAL COOLING
50
➛
Case Code
B
Anode Polarity Indicator
Voltage Code
➛
➛
W
➛
H
➛
➛
S
NSP Series
➛
120 Typ.
TIME (SECONDS)
RIPPLE CURRENT CORRECTION FACTOR OVER FREQUENCY
Frequency (Hz)
10Khz
20Khz
50Khz
100Khz
250Khz
TAPE DIMENSIONS (mm)
500Khz
1Mhz
Case
Code
A
+ 0.2
B
+ 0.2
Dφ
E
+ 0.1
+ 0.1
F
P0
+ 0.1
+ 0.1
P1
t
Correction Factor
+25°C ~ +105°C
0.6
0.7
0.8
1.0
1.1
1.2
D2
1.3
+ 0.2
W
+ 0.3
1.5
D5
7.7
D3
4.6
1.5
+0.1
1.75
5.5
4.0
2.1
8.0
12.0
3.4
D4
4.5
P0
Dφ
TYPICAL IMPEDANCE OVER FREQUENCY CHARACTERISTICS
NSP SERIES
F
cover tape
E
NSP330M8D2
NSP470M6.3D2
NSP560M4D2
NSP101M2D2
10
W
A
t
B
P1
REEL TAPE DIMENSIONS (mm)
A + 2.0
1.0
330
Ω)
Z (Ω
B min. C + 0.5 D + 0.8 E + 0.5 T + 1.0
50
13.0
21.0
2.0
20.0
t
W + 1.0
3.0
14
T
0.1
E
C
B
0.01
D
120
1K
10K
100K
Frequency (Hz)
®
NIC COMPONENTS CORPORATION
1M
10M
Case
Code
Reel
Quantity
D5, D2
3,500
D3, -D4
2,000
R:1.0
A
W
Page 3
t
Surface Mount Solid Polymer Aluminum Electrolytic Capacitor
NSPZ Series
Features
•
•
•
•
•
CYLINDRICAL LEADLESS TYPE FOR SURFACE MOUNTING
CAPACITANCE VALUES UP TO 680µF
LOW ESR & HIGH RIPPLE CURRENT AT 100K Hz
6.3x6mm ~ 10x8mm CASE SIZES
COMPATIBLE WITH REFLOW SOLDERING
NEW
!
SURFACE MOUNT
Characteristics
Rated Voltage Range
4 ~ 25 Vdc
Rated Capacitance Range
Operating Temp. Range
Capacitance Tolerance
15 ~ 680µF
-55 ~ +105oC
±20%(M)
Less than 0.2CV
W.V. (Vdc)
Max. Leakage Current After 2 Minutes @ 20oC
Working and Surge Voltage Ratings
S.V. (Vdc)
All Case Sizes
Tanδ @ 120Hz/20oC
1,000 Hours
10
16
25
8.0
13
20
22
0.12
Capacitance Change
Tanδ
Leakage Current
Load LifeTest @ 105°C
6.3
Within ± 20% of initial measured value
Less than specified max. value
Less than specified max. value
Standard Products and Case Sizes (mm)
Working Voltage (Vdc)
10
16
Cap
(µF)
Code
4.0
6.3
20
25
15
150
-
-
-
-
-
6.3x6
22
220
-
-
-
-
6.3x6
-
27
270
-
-
-
-
6.3x6
-
39
390
-
-
-
6.3x6
-
8x7
56
560
-
-
6.3x6
-
-
-
82
820
-
6.3x6
-
8x7
-
10x8
100
101
6.3x6
6.3x6
-
-
-
-
120
121
-
-
8x7
-
-
-
150
151
6.3x6
8x7
8x7
10x8
-
-
180
181
-
-
-
10x8
-
-
220
221
8x7
8x7
-
-
-
-
270
271
-
-
10x8
-
-
-
330
331
8x7
10x8
10x8
-
-
-
470
471
10x8
10x8
-
-
-
-
680
681
10x8
-
-
-
-
-
Part Marking
Series Code
PART NUMBERING SYSTEM
NSPZ 101 M 6.3V 6.3X6 TR 13
330mm (13”) Reel
Tape and Reel
Size in mm
Working Voltage
Tolerance Code M=20%, K=10%
Capacitance Code in µF, first 2 digits
are significant, third digit is no. of zeros
Series
Lot Code
Z16A
100
63V
Capacitance Value
Voltage
®
NIC COMPONENTS CORPORATION
Page 4
Surface Mount Solid Polymer Aluminum Electrolytic Capacitor
Case Dimensions (mm)
NSPZ Series
Do
Dφ ±0.5
L max.
A ±0.2
W ±0.2
I
P
6.3
8.0
10
6
7.0
8
6.6
8.3
10.3
0.65
0.9
0.9
2.65
2.95
3.25
1.9
3.1
4.5
L
0.3mm max.
Voltage
(Vdc)
Cap.
(µF)
100
150
220
330
470
680
82
100
150
220
330
470
56
120
150
270
330
39
82
150
180
22
27
15
39
82
4
6.3
10
16
20
25
ESR (mΩ)
20°C/100Khz
40
40
35
35
25
25
40
40
35
35
25
25
50
40
40
30
30
60
45
35
35
65
65
75
50
40
Ripple Current (mA)
105°C/100Khz
1,550
1,550
2,000
2,000
2,500
2,500
1,500
1,550
1,900
1,900
2,400
2,400
1,450
1,800
1,800
2,300
2,300
1,400
1,600
2,000
2,000
1,350
1,350
1,300
1,400
1,600
SURFACE MOUNT
Standard Values and Specifications
I
I
W
A
P
Land Pattern Dim. (mm)
Case Dia.
A
B
P
6.3
3.5
1.6
1.9
8
4.2
2.2
3.1
10
4.4
2.2
4.5
+
B
RECOMMENDED REFLOW SOLDERING PROFILE
Temperature - Deg. C
A
P
A
Peak Temperature
(240°C for 5 sec.)
300
250
Maximum Time Above +200°C
Peak Soldering Temperature
200
30 Seconds
240°C
150
40 Seconds
230°C
50 Seconds
220°C
Time at 200°C
100
150°C120 seconds
50
Soldering within 30 Seconds
Time (Seconds)
®
NIC COMPONENTS CORPORATION
Page 5
Surface Mount Aluminum Electrolytic Capacitor
NSPE Series
Features
•
•
•
•
•
CYLINDRICAL LEADLESS TYPE FOR SURFACE MOUNTING
SUPER LOW ESR & HIGH RIPPLE CURRENT
CAPACITANCE VALUES UP TO 820µF
6.3x6.3mm ~ 10x10.8mm CASE SIZES
COMPATIBLE WITH REFLOW SOLDERING
NEW!
SURFACE MOUNT
Characteristics
R a te d Vo lta g e R a n g e
4 ~ 16 Vdc
R a te d C a pa cita n ce R a ng e
2 2 ~ 82 0 µ F
-5 5 ~ + 1 0 5 o C
O p e ra tin g Te m p. R a n g e
C a pa cita n ce Tole ra n ce
M a x. L e aka g e C u rre n t A fte r 2 M inu te s @ 2 0 o C
± 2 0 % (M )
L e ss th an 0 .1 C V or 5 0 µ A w hich ever is g re a te r
W o rkin g a n d S u rg e Vo lta g e R a tin g s
Ta n δ @ 1 2 0 H z/20 o C
W.V. (V dc)
6 .3
10
16
S .V. (V d c)
8 .0
13
20
22
A ll C a se S ize s
0 .2 4
0 .2 2
0 .2 0
0 .1 8
Z -5 5 °C / Z + 2 0 °C
Im p ed a n ce R a tio n
25
2 .5
Z + 10 5 °C / Z + 2 0 °C
1 .0
L o a d L ife Te st @ 1 0 5 °C
C a pa cita n ce C ha n g e
W ith in ± 2 0% o f in itia l m e asu re d value
6 .3 m m D ia . a n d all 4 V d c p a r ts 1 ,0 0 0 H o u rs
8 m m ~ 1 0 m m D ia . 2 ,0 0 0 H o u rs
Ta nδ
L e a kag e C u rre n t
L e ss th an 2 0 0 % o f sp e cifie d m ax . value
L e ss th an sp e cifie d m a x. va lu e
Standard Products and Case Sizes (mm)
W o r k in g Vo lta g e ( V d c )
6 .3
10
Cap
(µ F )
Code
4.0
22
220
-
-
6 .3 x 6 .3
6 .3 x 6 .3
33
330
-
-
6 .3 x 6 .3
-
47
470
-
-
6 .3 x 6 .3
8 x 1 0 .8
100
101
-
6 .3 x 6 .3
8 x 1 0 .8
8 x 1 0 .8
150
151
-
-
8 x 1 0 .8
1 0 x 1 0 .8
220
221
-
8 x 1 0 .8
8 x 1 0 .8
-
330
331
-
8 x 1 0 .8
8 x 1 0 .8
-
390
391
-
8 x 1 0 .8
1 0 x 1 0 .8
-
470
471
8 x 1 0 .8
1 0 x 1 0 .8
1 0 x 1 0 .8
-
560
561
-
1 0 x 1 0 .8
-
-
680
681
1 0 x 1 0 .8
-
-
-
820
821
1 0 x 1 0 .8
-
-
-
16
Part Marking
Series Code
PART NUMBERING SYSTEM
NSPE 471 M 4V 8X10.8 TR 13
330mm (13”) Reel
Tape and Reel
Size in mm
Working Voltage
Tolerance Code M=20%, K=10%
Capacitance Code in µF, first 2 digits
are significant, third digit is no. of zeros
Series
Lot Code
E17
470
4V
Capacitance Value
Voltage
®
NIC COMPONENTS CORPORATION
Page 6
Surface Mount Aluminum Electrolytic Capacitor
NSPE Series
Do
Case Dimensions (mm)
Dφ ±0.5
L max.
A ±0.2
W
I±0.2
P±0.2
6.3
8.0
10
6.3
10.8
10.8
6.6
8.3
10.3
0.5~0.8
0.7~1.0
1.1~1.4
2.55
2.9
3.2
2.2
3.2
4.6
L
0.3mm max.
Voltage
(Vdc)
Cap.
(µF)
470
680
820
100
220
330
390
470
560
22
33
47
100
150
220
330
390
470
22
47
100
150
4
6.3
10
16
ESR (mΩ)
20°C/100Khz
30
25
23
50
30
30
30
25
25
60
60
60
30
30
30
30
25
25
70
45
45
40
Ripple Current (mA)
105°C/100Khz
1,550
2,090
2,180
1,120
1,550
1,550
1,550
2,090
2,090
1,020
1,020
1,020
1,550
1,550
1,550
1,550
2,090
2,090
900
1,200
1,200
1,810
SURFACE MOUNT
Standard Values and Specifications
I
I
W
A
P
Land Pattern Dim. (mm)
Case Dia.
A
B
P
6.3
3.5
1.6
1.9
8
4.2
2.2
3.1
10
4.4
2.2
4.5
+
B
RECOMMENDED REFLOW SOLDERING PROFILE
Temperature - Deg. C
A
P
A
Peak Temperature
(240°C for 5 sec.)
300
250
200
150
Time at 200°C
100
Maximum Time Above +200°C
Peak Soldering Temperature
30 Seconds
240°C
40 Seconds
230°C
50 Seconds
220°C
150°C120 seconds
50
Soldering within 30 Seconds
Time (Seconds)
®
NIC COMPONENTS CORPORATION
Page 7
NACZ Series
Surface Mount Aluminum Electrolytic Capacitors
FEATURES
•
•
•
•
•
•
CYLINDRICAL LEADLESS TYPE FOR SURFACE MOUNTING
VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100K Hz
SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC.
NEW EXPANDED CV RANGE, UP TO 3300µF
ANTI-SOLVENT (2 MINUTES)
DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
SURFACE MOUNT
CHARACTERISTICS
Rated Voltage Range
Rated Capacitance Range
6.3 ~ 50 Vdc
4.7 ~ 3300µF
Operating Temp. Range
Capacitance Tolerance
-55 ~ +105oC
±20%(M), ±10%(K)*
Max. Leakage Current After 2 Minutes @ 20oC
0.01CV or 3µA, whichever is greater
W.V. (Vdc)
6.3
S.V. (Vdc)
4 ~ 6mm Dia.
10
16
25
35
50
8.0
13
20
22
44
63
0.24 0.20 0.16 0.14 0.12 0.10
LOW IMPEDANCE
AT HIGH FREQUENCY.
C < 1000µF 0.28 0.24 0.20 0.16 0.14 0.12
Tanδ @ 120Hz/20oC
8mm Dia ~ up
C =1500µF
0.29 0.25
0.21
-
-
-
C =2200µF
0.30 0.26
0.32
6.3
10
3
2
5
4
16
2
4
25
2
3
35
2
3
50
2
3
C =3300µF
Low Temperature
Stability
Impedance Ratio @ 120Hz
Load LifeTest @ 105°C
W.V. (Vdc)
Z-40oC/Z +20oC
Z-55oC/Z +20oC
Capacitance Change
Tanδ
Leakage Current
4~6mm Dia 1,000 Hours
8~12.5mm Dia 2,000 Hours
INDUSTRY STANDARD
STYLE FOR SWITCHERS
AND CONVERTERS
Within ±25% of initial measured value
Less than 200% of specified max. value
Less than specified max. value
* Optional ± 10% (K) Tolerance available on most values. Contact factory for availability.
MAXIMUM PERMISSIBLE RIPPLE CURRENT
(mA rms AT 100KHz AND 105OC)
W o r k in g V o lt a g e ( V d c )
C a p (µ F )
4 .7
MAXIMUM IMPEDANCE (Ω
Ω AT 20OC AND 100KHz)
C a p (µ F )
W o r k in g V o lt a g e ( V d c )
6 .3
10
16
25
35
50
6 .3
10
16
25
35
50
-
-
-
-
80
-
4 .7
-
-
-
-
1 .8 0
-
-
-
-
1 .8 0
0 .7 6
0 .8 8
-
-
1 .8 0
0 .7 6
0 .7 6
-
10
-
-
-
80
150
165
10
15
-
-
80
150
150
-
15
22
-
80
150
150
150
165
22
-
1 .8 0
0 .7 6
0 .7 6
0 .7 6
0 .8 8
1 .8 0
-
-
-
-
-
-
0 .7 6
-
0 .4 4
0 .4 4
0 .7 5
27
80
-
-
-
-
-
27
33
-
150
-
230
230
185
33
47
150
-
230
230
230
185
47
0 .7 6
-
0 .4 4
0 .4 4
0 .4 4
0 .7 5
0 .7 6
-
-
0 .4 4
-
-
0 .4 4
0 .4 4
0 .4 4
0 .3 4
0 .4 0
56
150
-
-
230
-
-
56
68
-
230
230
230
280
300
68
-
100
230
-
230
280
-
300
100
0 .4 4
-
0 .4 4
0 .3 4
-
0 .4 0
-
0 .4 4
-
-
-
-
120
-
230
-
-
-
-
120
150
230
-
280
450
450
670
150
0 .4 4
-
0 .3 4
0 .1 7
0 .1 7
0 .2 2
220
230
280
280
450
450
670
220
0 .4 4
0 .3 4
0 .3 4
0 .1 7
0 .1 7
0 .2 2
330
280
450
450
450
670
-
330
0 .3 4
0 .1 7
0 .1 7
0 .1 7
0 .0 9
-
470
450
450
450
670
-
-
470
0 .1 7
0 .1 7
0 .1 7
0 .0 9
-
-
0 .0 9
-
0 .0 6 6
-
680
450
-
670
-
900
-
680
0 .1 7
-
1000
450
670
-
900
-
-
1000
0 .1 7
0 .0 9
-
0 .0 6 6
-
-
1500
670
-
900
-
-
-
1500
0 .0 9
-
0 .0 6 6
-
-
-
2200
-
900
-
-
-
-
2200
-
0 .0 6 6
-
-
-
-
3300
900
-
-
-
-
-
3300
0 .0 6 6
-
-
-
-
-
®
NIC COMPONENTS CORPORATION
Page 8
Surface Mount Aluminum Electrolytic Capacitors
NACZ Series
∅ x L (mm)
STANDARD PRODUCT AND CASE SIZE TABLE D∅
C a p (µ F )
Code
4 .7
10
W o r k in g Vo lt a g e (V d c )
10
16
25
4R7
-
-
-
-
4 x6 .3
-
100
-
-
-
4 x6 .3 *
5 x6 .3 *
6 .3 x6 .3 *
15
150
-
-
4 x6 .3
5 x6 .3
5 x6 .3 *
-
22
220
-
4 x6 .3
5 x6 .3 *
5 x6 .3
5 x6 .3 *
6 .3 x6 .3 *
27
270
4x6.3*
-
-
-
-
-
33
330
-
5x6.3
-
6.3x6.3
6.3x6.3*
6.3x8*
47
470
5x6.3
-
6.3x6.3
6.3x6.3
6.3x6.3*
6.3x8*
56
560
5 x6 .3 *
-
-
6 .3 x6 .3
-
-
68
680
-
6 .3 x6 .3
6 .3 x6 .3 *
6 .3 x6 .3
6 .3 x8 *
8 x1 0 .5 *
100
101
6 .3 x6 .3 *
-
6 .3 x6 .3 *
6 .3 x8 *
-
8 x1 0 .5 *
120
121
-
6 .3 x6 .3
-
-
-
-
150
151
6 .3 x6 .3
-
6 .3 x8 *
220
221
6 .3 x6 .3
6 .3 x8
6 .3 x8 *
330
331
6 .3 x8 *
8 x1 0 .5
470
471
8 x1 0 .5
680
681
10x8*
-
1000
102
8 x1 0 .5 *
1500
152
1 0 x 1 0 .5 *
2200
222
3300
332
8 x1 0 .5 *
8 x1 0 .5 *
35
8 x1 0 .5 *
10x8
50
1 0 x 1 0 .5 *
8 x1 0 .5
1 0 x 1 0 .5
8 x1 0 .5
1 0 x 1 0 .5
-
8 x1 0 .5
1 0 x 1 0 .5 *
-
-
1 0 x 1 0 .5
-
1 2 .5 x1 4
-
1 0 x 1 0 .5
-
1 2 .5 x1 4
-
-
-
1 2 .5 x1 4
-
-
-
-
1 2 .5 x1 4
-
-
-
-
1 2 .5 x1 4
-
-
-
-
-
P ± 0.2
Q'ty per Reel
1,200 pcs
8 x1 0 .5
10x8
8 x1 0 .5 *
10x8
10x8
IP
CH T S
UM N
AL E M E
T
N
C
TA PLA
RE
SURFACE MOUNT
6 .3
Dimensions, Land Patterns & Soldering Info:
See Link
*Denotes values available in optional 10% tolerance
DIMENSIONS (mm) and STANDARD REEL QUANTITIES
4x6.3
4.0
6.3
4.3
4.3
1.8
0.5-0.8
1.0
5x6.3
5.0
6.3
5.3
5.3
2.1
0.5-0.8
1.4
800 pcs
6.3x6.3
6.3
6.3
6.6
6.6
2.5
0.5-0.8
2.2
800 pcs
6.3x8
6.3
8.0
6.6
6.6
2.5
0.5-0.8
2.2
500 pcs
8x10.5
8.0
10.5
8.3
8.3
2.9
0.7~1.0
3.2
300 pcs
10x8
10.0
8.0
10.3
10.3
3.2
0.7~1.0
4.6
300 pcs
10x10.5
10.0
10.5
10.3
10.3
3.2
0.7~1.0
4.6
300 pcs
12.5x14
12.5
14.0
12.8
12.8
4.5
0.7~1.0
4.6
200 pcs
PART NUMBERING SYSTEM
NACZ 101 M 16V 6.3X6.3 TR 13
330mm (13”)Reel
Tape and Reel
Size in mm
Working Voltage
Tolerance Code M=20%, K=10%
Capacitance Code in µF, first 2 digits are significant,
Third digit is no. of zeros, “R” indicates decimal for
For under 10µF
®
Series
NIC COMPONENTS CORPORATION
➛
D∅
➛
➛
W
+
L
➛
B
➛
➛ ➛
I ± 0.2
-
➛
B ± 0.2
A
W
➛ I➛
P
➛I➛
➛ ➛
A ± 0.2
0.3 Max.
L max.
➛➛ ➛
D∅ ± 0.5
➛
➛ ➛
Case Size
Page 9
Surface Mount Aluminum Electrolytic Capacitors
NACZF Series
FEATURES
•
•
•
•
•
•
•
CYLINDRICAL LEADLESS TYPE FOR SURFACE MOUNTING
HIGH CAPACITANCE VALUES (UP TO 6800µF)
LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100K Hz
12.5mm x 17mm ~ 18mm x 22mm Size
4 TERMINALS (16 & 18mm Dia.) FOR HIGH VIBRATION STABILITY
LONG LIFE (5000 HOURS AT +105OC)
COMPATIBLE WITH REFLOW SOLDERING
NEW
!
CHARACTERISTICS
5000 Hours at +105oC
Rated WVDC
Resistance to Soldering Heat
Within the Recommended
Reflow Conditions
6.3 ~ 100 Vdc
47 ~ 6800µF
- 40°C ~ + 105°C
+ 20% (M)
0.01CV or 3µA whichever is greater
10Vdc 16Vdc 25Vdc 35Vdc 50Vdc 63Vdc
13Vdc 20Vdc 32Vdc 44Vdc 63Vdc 79Vdc
0.19
0.15
0.14
0.12
0.10
0.08
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
4
Within + 20% of initial measured value
Tan δ
Leakage Current
Capacitance Change
Tan δ
Leakage Current
SURFACE MOUNT
Rated Voltage Range
Rated Capacitance Range
Operating Temperature Range
Capacitance Tolerance
Max. Leakage Current After 2 Minutes
Working Voltage
6.3Vdc
Surge Voltage
8.0Vdc
Max. Tanδ at 120Hz & 20°C
0.22
Low Temerature
Z -25°C/Z +20°C
2
Stability
Z -40°C/Z +20°C
3
(Impedance Ration @ 120Hz)
Z -55°C/Z +20°C
4
High Temperature Load Life
Capacitance Change
100Vdc
125Vdc
0.07
2
3
4
Less than 200% of specified value
Less than the specified maximum value
Within + 10% of initial measured value
Less than the specified maximum value
Less than the specified maximum value
∅ xL (mm)
STANDARD PRODUCT AND CASE SIZE TABLE D∅
Cap (µF) Code
47
470
68
680
100
101
220
330
221
331
470
471
1000
102
2200
222
3300
4700
6800
Working Voltage (Vdc)
6.3
10
16
25
35
50
63
100
12.5x17*
12.5x17*
PART NUMBERING SYSTEM
NACZF 102 M 16V 16X17 TR 13
12.5x17*
12.5x17*
12.5x17*
12.5x17*
16x17
12.5x17*
16x17
16x17
18x17
18x17
18x22
18x22
16x17
18x17
12.5x17*
16x17
18x17
18x17
18x22
16x17
16x17
18x17
18x22
18x22
332
472
18x17
16x22
18x17
18x22
18x22
18x22
682
18x22
18x22
330mm (13”) Reel
Tape and Reel
Size in mm
Working Voltage
Tolerance Code M=20%, K=10%
Capacitance Code in µF, first 2 digits are significant,
Third digit is no. of zeros, “R” indicates decimal for
values under 10µF
Series
Dimensions, Land Patterns & Soldering Info:
See link
* Parts with a 12.5mm diameter have two terminals
Link To Complete Case Dimensions
MAXIMUM RIPPLE CURRENT
(mA rms AT 100Khz AND 105°C)
Cap (µF)
6.3
10
MAXIMUM IMPEDANCE
Ω AT 100Khz AND 20°C)
(Ω
Working Voltage (Vdc)
16
25
35
50
63
100
Cap (µF)
6.3
10
Working Voltage (Vdc)
16
25
35
50
63
100
47
511
47
0.150
68
1020 511
68
0.150 0.150
100
1020 511
100
0.150 0.090
220
1150 1410 917
220
0.110 0.090 0.086
330
0.065 0.080 0.086 0.055
330
1205 1610 1690 1230
470
1205 1690 1900 2290
1000
1205 1690 2000 2000 2420
470
1000
0.065 0.043 0.068
0.065 0.043 0.038 0.038 0.042
2200
1690 1690 2000 2490 2490
2200
0.043 0.043 0.038 0.028 0.028
3300
2000 2000 2490 2490
3300
0.038 0.038 0.028 0.028
4700
2205 2490
4700
0.029 0.028
6800
2490 2490
6800
0.028 0.028
®
NIC COMPONENTS CORPORATION
Page 10
Surface Mount Polymer-Tantalum Capacitor
NTP Series
FEATURES
• Ultra Low ESR and High Ripple Current Ratings
• Values from 3.3µF to 470µF
• Suitable for Reflow Soldering
• Available in EIA A, B, C, V and D Case Sizes
CHARACTERISTICS
Capacitance Range
3.3µF to 470µF
Capacitance Tolerance
±20% (M)
Rated Working Voltage
4.0Vdc to 10Vdc
Operating Temperature Range
-55°C ~ +105°C (derating above 85°C)
See specifications table
Leakage Current Rating (after 5 minutes)
0.1CV or 3µA whichever is greater
Capacitance Change Verse Tem perature
-55°C
+105°C
∆C - 20%
∆ C + 50%
Soldering Heat Resistance
(+240°C for 5 ~ 10 sec.)
∆ Capacitance: + 20% Leakage Current: 130% of initial value
Dissipation Factor: less than value in specifications table.
Moisture Resistance
(500 hours; 90~95% RH @ 40°C)
∆ Capacitance: + 30% ~ -20% Leakage Current: less than value in specifications table.
Dissipation Factor: less than value in specifications table.
Load Life Test (rated voltage @ 85°C)
1000 hours
∆ Capacitance: + 30% Leakage Current: less than value in specifications table.
Dissipation Factor: 150% of value in specifications table.
Base Failure Rate
1% /1000 hours at +85°C
CASE SIZES AND MAXIMUM DISSIPATION FACTOR
MAX. RIPPLE CURRENT(mArms) 100Khz/105°C**
R ated Voltage @ +85 o C
4
6.3
10
Surge Voltage @ +85 o C
5.2
8
13
D erate d Voltage @ 105 o C
3.3
5
8
3 .3
C a s e S iz e s
C a s e S iz e s
C a p a c ita n c e ( µ F )
C a p a c ita n c e µ F
C ode
C a s e S iz e s
4 .7
3.3
33 5
A (9 % )
6 .8
4.7
475
6.8
685
10
106
A (1 5 % )
A (9 % )
A (1 5 % )
B (1 5 % )
B (2 5 % )
22
15
156
B (15% )
C (2 5 % )
33
B (1 5 % )
B (1 5 % )
C (2 5 % )
47
C (2 5 % )
B
B
C
C
C
C
D
D
22
226
33
336
47
476
68
686
100
107
A (9 % )
A (1 5 % )
(1 5 % )
(2 5 % )
(2 5 % )
(2 5 % )
(2 5 % )
(2 5 % )
(3 0 % )
(3 0 % )
D (1 0 % )
150
157
220
227
V /D ( 1 0 % )
D (1 0 % )
330
337
D (1 0 % )
D (1 0 % )
470
477
D (1 0 % )
V /D ( 1 0 % )
D (1 0 % )
MAX. ESR (mΩ
Ω ) @ 100Khz, 25°C
C a p a c ita n c e ( µ F )
6 .3
3 .3
A=500
A=500
B=300
C=200
B=300
B=300
C=150
C=100
B=300
B=200
C=100
C=100
C=100
C=100
D=100
D=100
V=45
D = 8 0(5 5)*
A=800
15
33
47
68
100
330
470
®
10
A=265
A=265
A=265
A=265
A=265
B=398
B=398
B=398
C=530
B=398
B=398
C=530
C=530
B=398
B=398
C=530
C=530
C=530
C=530
D=662
D=662
A=265
10
15
68
100
V /D = 6 6 2
150
V /D = 6 6 2
220
V /D = 6 6 2
D=693
330
D=662
D=730
470
D=662
D=662
Te m p e ra tu re
2 5 °C
8 5 °C
1 0 5 °C
C o rre c tio n F a c to r
2 .5 0
2 .2 5
1 .0
V=45
D = 8 0(4 0)*
D = 5 5(4 0)*
D = 8 0(4 0)*
PART NUMBERING SYSTEM
NTP 106 M 10 TR B (60)
Optional ESR
Case Code
Packaging:TR = Tape/Reel
Voltage
Tolerance Code
Capacitance Code
Series
V=45
D = 8 0(5 5)*
150
220
10
A=800
A=800
B=500
B=300
6 .8
22
6 .3
A=800
4 .7
10
W o r k in g Vo lta g e (V d c )
4
**RIPPLE CURRENT TEMPERATURE CORRECTION FACTOR
W o r k in g Vo lta g e (V d c )
4
SURFACE MOUNT
Dissipation Factor (120Hz/20°C)
D = 5 5(4 0)*
D = 5 5(4 0)*
D = 5 5(4 0)*
*Optional ESR values available on special order.
NIC COMPONENTS CORPORATION
Page 11
Surface Mount Polymer-Tantalum Capacitor
NTP Series
CASE DIMENSIONS (mm)
Case Size
EIA Code
L
H
W1
W2
T
A
3216
3.2 ± 0.2
1.6 ± 0.2
1.6 ± 0.2
1.2± 0.1
0.8 ± 0.3
B
3528
3.5± 0.2
1.9 ± 0.2
2.8 ± 0.2
2.3 ± 0.1
0.8 ± 0.3
C
6032
6.0 ± 0.2
2.5 ± 0.3
3.2± 0.2
1.8 ± 0.1
1.3 ± 0.3
V
7343
7.3 ± 0.2
1.9 ± 0.1
4.3 ± 0.2
2.4 ± 0.1
1.3 ± 0.3
D
7343
7.3 ± 0.2
2.8 ± 0.2
4.3 ± 0.2
2.4 ± 0.1
1.3 ± 0.3
SURFACE MOUNT
“A” Case Size
L
W1
W1
W1
H
H
H
W2
W2
W2
T
T
TAPE SPECIFICATIONS (mm)
C ase
S iz e
L
“B” Case Size
L
T
“C” , “V” & “D” Case Size
A
+ 0 .2
B
+ 0 .2
A
1 .9
3 .5
B
3 .3
3 .8
C
V
3 .7
4 .8
6 .4
7 .7
D
4 .8
7 .7
C
+ 0 .3
D
+ 0 .1
8 .0
3 .5
1 2 .0
5 .5
T
T
E
+ 0 .1
F
+ 0 .1
G
+ 0 .0 5
H
+ 0 .1
T
J
+ 0 .1
K
+ 0 .2
1 .9
4 .0
1 .7 5
2 .1
2 .0
φ 1 .5
4 .0
3 .0
2 .1
8 .0
t
m ax.
Reel
Q ty
0 .2
2000
0 .3
500
3 .3
REEL SPECIFICATIONS (mm)
Tape Width
A + 2.0
B min.
C + 0.5
D + 0.5
E + 0.5
φ 178
φ 50
φ 13
φ 21
2.0
W1 + 1.0 W2 max.
8 mm
12 mm
10
14.5
14.5
18.5
H
E
W2
K
t
J
C
E
Cover
Tape
D
C
B
B
K
A
F
D
W1
A
RECOMMENDED PEAK TEMPERATURE/TIME
RECOMMENDED LAND PATTERN (mm)
Case Size
S max.
X min.
Y min.
A
1.1
3.8
1.5
B
1.4
4.1
2.7
C
2.9
6.9
2.7
D
4.1
8.2
2.9
280°C
260°C
240°C
Y
S
®
X
NIC COMPONENTS CORPORATION
220°C
200°C
10
Tim e (Seconds)
20
Page 12
Low ESR Tantalum Chip Capacitors
NTC-L Series
FEATURES
•
•
•
•
Low ESR and High Ripple Current Ratings
Values from 10µF to 330µF
Suitable for Flow and Reflow Soldering Processes
Available in EIA B, C and D Case Sizes
SPECIFICATIONS
10µF to 330µF
Capacitance Tolerance
+20% (M), +10% (K)
Rated Working Voltage
6.3Vdc to 35Vdc
Operating Temperature Range
PART NUMBERING SYSTEM
NTC-L 106 K 16 TR B
-55°C ~ +125°C (derating above 85°C)
Dissipation Factor @120Hz/25°C
10µF-68µF
6% max.
100µF-150µF
8% max.
220µF-330µF
10% max.
-55°C
+85°C
+125°C
Capacitance Change Verse
Temperature
Case Code
Packaging:TR = Tape/Reel
Voltage
Tolerance Code
Capacitance Code
Series
∆C - 10%
∆C + 10%
∆C + 12%
Soldering Heat Resistance
(+260°C for 5 ~ 10 sec.)
Moisture Resistance
∆C + 10% Max., Leakage Current and Dissipation
(500 hours; 90~95% RH @40°C)
Factor will be less than value specificed below
Load Life Test (at rated voltage)
(2000 hours @ 85°C )
Base Failure Rate (1.0Ω/Volt)
1%/1000 hours at 60% confidence level (+85°C)
STANDARD RATINGS AND CASE SIZE (ohms)
R a te d Vo lta g e @ 8 5 °C
6 .3 V d c
10Vdc
16Vdc
20Vdc
25Vdc
35Vdc
S u rg e Vo lta g e @ 8 5 °C
8
13
20
26
32
45
D e ra te d Vo lta g e @ 1 2 5 °C
4
6 .3
10
13
16
22
C a se S ize
C a se S ize
C a se S ize
C a se S ize
C a p a cita n ce (µ F )
C ode
C a se S ize
C a se S ize
10
106
B
B
B
C
D
D
15
156
B
B
C
C
D
D
22
226
B
C
C
D
D
D
33
336
C
C
D
D
D
-
47
476
C
D
D
D
-
-
68
686
D
D
D
-
-
-
100
107
D
D
D
-
-
-
150
157
D
D
-
-
-
-
220
227
D
D
-
-
-
-
330
337
D
-
-
-
-
-
MAXIMUM ESR @ 25°C/100Khz
Land Patterns, De-rating Info &
Characteristics:
See Link
MAXIMUM RIPPLE CURRENT @ 25°C (mA) @100Khz
C a p a c ita n c e
(µ F )
6 .3 V d c
10Vdc
16Vdc
20Vdc
25Vdc
35Vdc
C a p a c it a n c e
(µ F )
6 .3 V d c
10V dc
16V dc
20V dc
25V dc
35V dc
10
0 .7
0 .7
0 .6
0 .6
0 .3
0 .3
10
370
370
400
400
630
630
15
0 .6
0 .6
0 .5
0 .5
0 .3
0 .3
15
400
400
440
440
630
630
22
0 .5
0 .5
0 .4
0 .3 5
0 .3
0 .3
22
440
440
500
580
630
490
33
0 .3 5
0 .3 5
0 .2 5
0 .3
0 .3
-
33
530
530
690
630
640
-
47
0 .3 5
0 .2 5
0 .2
0 .2
-
-
47
530
690
770
830
-
-
68
0 .2
0 .2
0 .1 5
-
-
-
68
770
770
890
-
-
-
100
0 .1 5
0 .1
0 .1
-
-
-
100
890
1 ,1 0 0
1 ,1 0 0
-
-
-
150
0 .1
0 .1
-
-
-
-
150
1 ,1 0 0
1 ,1 0 0
-
-
-
-
220
0 .1
0 .1
-
-
-
-
220
1 ,1 0 0
1 ,1 0 0
-
-
-
-
330
0 .1
-
-
-
-
-
330
1 ,1 0 0
-
-
-
-
-
®
NIC COMPONENTS CORPORATION
Page 13
SURFACE MOUNT
Capacitance Range
Low ESR Tantalum Chip Capacitors
C a p a c ita n c e
(µ F )
6 .3 V d c
10Vdc
10
0 .7
15
1 .0
22
CASE DIMENSIONS (mm)
Case
Code
16Vdc
20Vdc
25Vdc
1 .0
1 .6
2 .0
2 .5
3 .5
B
3.4
2.6
1 .5
2 .4
3 .0
3 .8
5 .3
C
5.8
3.2
1 .4
2 .2
3 .5
4 .4
5 .5
7 .7
D
7.3
4.3 + 0.3
2.8
33
2 .1
3 .3
5 .3
6 .6
8 .3
-
47
3 .0
4 .7
7 .5
9 .4
-
-
68
4 .3
6 .8
11
-
-
-
100
6 .3
10
16
-
-
-
150
9 .5
15
-
-
-
-
220
14
22
-
-
-
-
330
2 0 .8
-
-
-
-
-
35Vdc
L + 0.2
W + 0.2
H + 0.2
l1 + 0.2
l2 + 0.2
a + 0.2
b + 0.2
1.9
1.4
0.8
2.0
0.7
2.2
2.5
2.4
1.3
2.2
0.7
2.4
3.8
1.3
3.1
1.2
3.3
L
c + 0.1
W
H
+
b
a
c
b
I1
I2
TAPING SPECIFICATIONS (mm)
I2
C ase
S iz e
A
+ 0 .1
B
+ 0 .1
C
+ 0 .3
D
+ 0 .1
E
+ 0 .1
F
+ 0 .1
G
+ 0 .1
H
+ 0 .1
J
+ 0 .1
K
m ax.
t
m ax.
R eel
Q ty
B
3 .1
3 .9
8 .0
3 .5
1 .7 5
4 .0
2 .0
4 .0
1 .5
2 .5
0 .2
2000
C
3 .7
6 .3
1 2 .0
5 .5
1 .7 5
8 .0
2 .0
4 .0
1 .5
3 .0
0 .3
500
D
4 .8
7 .7
1 2 .0
5 .5
1 .7 5
8 .0
2 .0
4 .0
1 .5
3 .4
0 .3
500
2.0+0.5
H
t
J
G
13+0.5
E
D
a
C
60+0.5
a
B
A
K
F
RECOMMENDED SOLDERING PROFILES
21+0.8
178+2.0
9+0.3
Note: To avoid thermal shock a preheating stage, 130°C ~ 160°C for 1 minute, should be incorporated into the soldering process
Flow Soldering - Permitted
Temperature/Time Range
Time (Seconds)
Time (Seconds)
Reflow Soldering - Permitted
Temperature/Time Range
60
40
20
0
190
200
210
220
230
240
250
260
40
30
20
10
0
200
B Case
C&D
210
Temperature (°C)
200
100
0
®
0
30
60
90
100 125 135 150 160
Time (Seconds)
NIC COMPONENTS CORPORATION
230
240
250
260
Flow Soldering - Recommended Profile
Maximum Temperature/Time: 245°C/5 sec.
Reflow Soldering - Recommend Profile
Maximum Temperature/Time: 260°C/10 sec.
300
220
Temperature (deg. C)
Temperature (deg. C)
Temperature (°C)
SURFACE MOUNT
µ A)
MAXIMUM LEAKAGE CURRENT @25°C (µ
NTC-L Series
250
200
150
100
50
0
0
30
60
90
100 125 130 150 160
Time (Seconds)
Page 14
Multilayer Ceramic Chip Capacitors
NMC Series X7R
SURFACE MOUNT
FEATURES
• CLASS II DIELECTRIC, TEMPERATURE STABLE
• EXCELLENT FREQUENCY CHARACTERISTICS, NON-LINEAR
CAPACITANCE CHANGE
• HIGHER CAPACITANCE THAN NPO
• NICKEL BARRIER TERMINATIONS AND EXCELLENT
MECHANICAL STRENGTH
• EIA MARKING AVAILABLE
SPECIFICATIONS X7R
Capacitance Range
39pF to 10µF
Capacitance Tolerances
±5%(J), ±10%(K), ±20%(M)
Operating Temperature Range
-55oC to +125oC
Temperature Characteristics
±15% ∆ max. over temperature range (with 0 Vdc applied)
Rated Voltages
Insulation Resistance @ 25OC and Rated Vdc
16Vdc, 25Vdc, 50Vdc, 100Vdc (see NMC-H Series for Higher Voltages)
2.5% max. (50Vdc, 100Vdc); 3.5% max. (16Vdc, 25Vdc), 5% max. (10Vdc)
@ 1.0Vrms and khz, +25oC
100,000 Megohms min. or 1000 ohm/F min. whichever is less
Dielectric Withstanding Voltage
250% of Rated Voltage for 5 ± 1 seconds, 50 milliamps maximum
Test Conditions (EIA-198-2E)
1khz, 1.0V ±0.2 Vrms
Dissipation Factor
Voltage Coefficient of Capacitance - X7R
Typical X7R Temperature Coefficient
Temperature °C
DC Volts Applied
Impedance vs. Frequency - X7R
Minimum Insulation Resistance
vs. Temperature
% Dissipation Factor vs. Temperature
10000
.001uF
Insulation Resistance
(Ω Farads)
1000
0.1uF
100
10
10
25
Frequency (Mhz)
0805
PART NUMBERING SYSTEM NMC
X7R
102
100
125
Temperature °C
Temperature °C
K
50
TRP or TRPLP
M
EIA Marking
Special Order: Contact NIC
Plastic Reel & Plastic Carrier
Plastic Reel & Paper Carrier
Voltage (Vdc)
Capacitance Tolerance Code (see chart above)
Capacitance Code, expressed in pF, first 2 digits are
significant, 3rd digit is no. of zeros, “R” indicates
decimal for under 10pF
®
NIC COMPONENTS CORPORATION
Temperature Characteristic
Size Code (see chart)
Series
Page 15
SURFACE MOUNT
Multilayer Ceramic Chip Capacitors
NMC Series X7R
W
T (max.)
P
Termination:
Solder plate finish
over nickel barrier
over palladium-silver
base.
P
L
X7R CAPACITOR SIZE CHART
(mm)
(CONSULT FACTORY
FOR CAPACITANCE
VALUES NOT LISTED)
EIA Case Size
Length
L
Width
W
0201
0402
0603
0805
1206
1210
1812
2225
0.6±0.03
1.0±0.10
1.6±0.15
2.0±0.2
3.2±0.2
3.2±0.2
4.5±0.3
5.7±0.4
6.35±0.25
0.3±0.03
0.5±0.10
0.8±0.15
1.25±0.2
1.6±0.2
2.5±0.2
3.2±0.25
Thickness (max.) T
0.3±0.03
0.6
1.0
1.30
1.80
1.80
1.80
1.80
Termination Width P
0.15±0.05
0.2±0.1
.12-.51
.25-.71
.25-.71
.25-.71
.25-.76
.25-1.02
Working Voltage (Vdc)
Capacitance
16
25
50
16
25
50
10/16
25
50
100
16
25
50
100
16
25
50
100
10/16
25
50
100
25
50
100
25
50
100
39pF
47
56
For Values
Under 39pF
SEE NPO
68
82
100
150
220
330
470
680
820
1000
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
.01µF
.015
.018
.022
.027
.033
.039
Land Pattern & Soldering Info
see link
High Capacitance X7R
®
NIC COMPONENTS CORPORATION
.047
16V
.056
16V
.068
16V
.082
16V
.1
16V
.15
10V
16V
.22
10V
16V
*
*
.33
16V
.47
16V
.68
16V
16V
1.0
16V
16V
1.5
16V
2.2
10V
3.3
10V
4.7
10V
6.8
10V
10
10V
* 1.35mm maximum thickness
Page 16
LEADED
Miniature Aluminum Electrolytic Capacitors
ULTRA LOW IMPEDANCE AT HIGH FREQUENCY, RADIAL LEAD TYPE,
POLARIZED ALUMINUM ELECTROLYTIC CAPACITORS
FEATURES
• VERY LOW IMPEDANCE
• LONG LIFE AT 105°C (2000 ~ 4000 hrs.)
• HIGH STABILITY AT LOW TEMPERATURE
• IDEALLY SUITED FOR USE IN SWITCHING POWER SUPPLIES &
..CONVERTORS
CHARACTERISTICS
Rated Voltage Range
Capacitance Range
Operating Temperature Range
Capacitance Tolerance
6.3 ~ 35Vdc
82 ~ 4,700µF
-40 O~+105OC
±20% (M)
Maximum Leakage Current
After 2 minutes At 20 oC
0.01CV, or 3µA,
whichever is greater
Maximum Tan δ At 20oC & 120Hz
Low Temperature Stability
(Impedance Ratio@120Hz)
Load Life Test at Rated W.V.
105 oC 2,000 Hrs. = 6.3∅
105 oC 3,000 Hrs. = 8∅
105 oC 4,000 Hrs. = 10∅ & up
W.V. (Vdc)
C < 1,000µF
C = 1,200µF ~ 1,800µF
C = 2,200µF ~ 2,700µF
C = 3,300µF ~ 3,900µF
C = 4,700µF
Z-20oC/Z+20 oC
Z-40oC/Z+20 oC
Capacitance Change
Cap. (µF)
6.3
-
82
1 20
1 50
2 20
-
-
-
-
-
2
3
Within +25% of initial measured value
Less than 200% of specified maximum value
Leakage Current
Less than specified value
MAXIMUM RIPPLE CURRENT (mA@ 100KHz/105°C)
Cap. (µF)
35
1 30
72
56
41
53
38
-
82
1 20
1 50
2 20
6.3
-
Wor k i n g Vol t ag e ( Vd c)
10
16
25
4 05
4 05
4 05
7 60
35
4 05
7 60
9 95
1 25 0
1 03 0
1 43 0
-
-
-
4 70
-
7 60
23
5 60
7 60
-
-
6 80
-
23
21
8 20
9 95
1 82 0
2 36 0
1 03 0
9 95
1 03 0
1 25 0
1 43 0
9 95
1 03 0
1 25 0
1 43 0
-
1 82 0
-
2 77 0
1 82 0
1 82 0
2 36 0
3 29 0
1 82 0
2 36 0
2 77 0
3 29 0
-
2 36 0
2 77 0
3 29 0
-
2 77 0
3 29 0
-
-
72
5 60
72
56
53
41
38
1 , 50 0
1 , 80 0
2 , 20 0
2 , 70 0
3 , 30 0
3 , 90 0
4 , 70 0
0.20
0.25
-
-
-
1 , 20 0
0.23
0.28
0.30
7 60
9 95
1 03 0
1 25 0
1 43 0
-
4 70
41
38
23
23
21
18
16
0.26
-
56
53
41
38
-
53
35
0.12
-
-
-
72
56
53
41
38
-
1 , 00 0
25
0.14
0.16
-
-
-
56
16
0.16
0.18
4 05
-
-
1 30
-
8 20
10
0.19
0.21
3 30
3 90
-
3 30
3 90
-
6.3
0.22
0.24
2 70
2 70
6 80
NEW!
Tan δ
Ω @ 100KHz/20°C)
MAXIMUM IMPEDANCE (mΩ
Wor k i n g Vol t ag e ( Vd c)
10
16
25
1 30
1 30
1 30
72
NRSG Series
23
-
18
1 , 00 0
23
23
21
16
1 , 20 0
23
21
18
16
-
21
18
16
-
18
16
-
-
1 , 50 0
1 , 80 0
2 , 20 0
2 , 70 0
3 , 30 0
3 , 90 0
4 , 70 0
1 25 0
1 43 0
1 82 0
1 82 0
2 36 0
2 77 0
3 29 0
-
1 82 0
-
PART NUMBERING SYSTEM
NRSG 102
M
25V
10x20
Size (D∅ x L)
Rated Voltage
Tolerance Code
Capacitance Code
®
Series
NIC COMPONENTS CORPORATION
Page 17
Miniature Aluminum Electrolytic Capacitors
2 70
2 71
-
-
-
-
3 30
3 90
3 31
3 91
6 . 3x 11
-
-
4 70
4 71
-
8 x 11 . 5
5 60
5 61
8 x 11 . 5
8 x 15
1 0x 1 2 . 5
8 x 20
1 0x 1 6
-
6 80
6 81
-
8 20
8 21
8 x 15
1 , 00 0
1 02
1 0x 1 2 . 5
8 x 15
1 0x 1 2 . 5
8 x 20
1 0x 1 6
8 x 11 . 5
8 x 15
1 0x 1 2 . 5
8 x 20
1 0x 1 6
-
1 , 20 0
1 22
1 , 50 0
1 , 80 0
2 , 20 0
2 , 70 0
3 , 30 0
3 , 90 0
4 , 70 0
1 52
1 82
2 22
2 72
3 32
3 92
4 72
8 x 20
1 0x 1 6
1 0x 2 0
1 0x 2 0
1 2. 5 x 2 0
1 2. 5 x 2 5
1 2. 5 x 3 0
Case Dia. (D∅)
6.3
8
35
6 . 3x 11
8 x 11 . 5
8 x 15
8 x 20
1 0x 1 2 . 5
1 0x 1 6
1 0x 2 0
-
-
1 0x 2 0
1 2. 5 x 2 0
1 0x 2 0
-
1 2. 5 x 2 5
1 0x 2 0
1 0x 2 0
1 2. 5 x 2 0
1 2. 5 x 3 0
1 0x 2 0
1 2. 5 x 2 0
1 2. 5 x 2 5
1 2. 5 x 3 0
-
1 2. 5 x 2 0
1 2. 5 x 2 5
1 2. 5 x 3 0
-
1 2. 5 x 2 5
1 2. 5 x 3 0
-
-
Polarity Marking
DIAMETER AND LEADSPACE (mm)
LEADED
STANDARD PRODUCTS AND CASE SIZES (mm)
Wo r k i ng Vol t a ge ( Vd c )
Cap. (µF) Code
6.3
10
16
25
82
8 20
1 20
1 21
6 . 3x 11
6 . 3x 11
1 50
1 51
2 20
2 21
6 . 3x 11
8 x 11 . 5
NRSG Series
Insulation Sleeving
dφ ± 0.05
10 12.5 12.5x30
Lead Spacing (F) 2.5 3.5 5.0 5.0
5.0
Leads Dia. (d∅) 0.5 0.6 0.6 0.6
0.8
β = L < 20mm = 1.5mm, L > 20mm =2.0mm
α = 0.5mm
F±
0.05
L+β
15mm Min. 4mm
Min.
D+α
®
NIC COMPONENTS CORPORATION
Page 18
LEADED
Miniature Aluminum Electrolytic Capacitors
NRSX Series
VERY LOW IMPEDANCE AT HIGH FREQUENCY, RADIAL LEAD TYPE,
POLARIZED ALUMINUM ELECTROLYTIC CAPACITORS
FEATURES
• VERY LOW IMPEDANCE
!
New
• LONG LIFE AT 105°C (1000 ~ 7000 hrs.)
• HIGH STABILITY AT LOW TEMPERATURE
• IDEALLY SUITED FOR USE IN SWITCHING POWER SUPPLIES &
..CONVERTORS
CHARACTERISTICS
Rated Voltage Range
Capacitance Range
Operating Temperature Range
Capacitance Tolerance
After 1 min.
Max. Leakage Current @ (20oC)
After 2 min.
Max. Tan δ @ 120Hz/20°C
Low Temperature Stability
Impedance Ratio @ 120Hz
Load Life Test at Rated W.V. & 105°C
7,000 Hours: 16 ~ 18∅
5,000 Hours: 12.5∅
4,000 Hours: 10∅
3,000 Hours: 8 ∅
2,500 Hours: 6.3∅
2,000 Hours: 5 ∅
1,000 Hours: 4∅
Shelf Life Test
Low Z
6.3 ~ 50 VDC
NRSZ
1.0 ~ 15,000µF
-55 ~ +105°C
+ 20% (M)
0.03CV or 4µA, whichever if greater
0.01CV or 3µA, whichever if greater
W.V. (Vdc)
6.3
10
16
25
S.V. (Vdc)
8
13
20
32
C < 1,200µF
0.22 0.19 0.16 0.14
C = 1,500µF
0.23 0.20 0.17 0.15
C = 1,800µF
0.23 0.20 0.17 0.15
C = 2,200µF
0.24 0.21 0.18 0.16
C = 2,700µF
0.25 0.22 0.19 0.17
C = 3,300µF
0.26 0.23 0.20 0.18
C = 3,900µF
0.27 0.24 0.21 0.19
C = 4,700µF
0.28 0.25 0.22 0.20
C = 5,600µF
0.30 0.27 0.24
C = 6,800µF
0.32 0.29 0.26
C = 8,200µF
0.35 0.32 0.29
C = 10,000µF
0.38 0.35
C = 12,000µF
0.42
C = 15,000µF
0.48
Z-25°C/Z+20°C
3
2
2
2
Z-40°C/Z+20°C
4
4
3
3
Very Low Z
NRSX
35
44
0.12
0.13
0.13
0.14
0.15
0.16
50
63
0.10
0.11
0.11
0.12
2
3
2
2
Capacitance Change
Within +20% of initial measured value
Tan δ
Less than 200% of specified maximum value
Leakage Current
Less than specified maximum value
Capacitance Change
Within +20% of initial measured value
105°C 1,000 Hours
Tan δ
Less than 200% of specified maximum value
No Load
Max. Impedance at 100Khz & -20°C
Applicable Standards
Leakage Current
Less than specified maximum value
Less than 2 times the impedance at 100Khz & +20°C
JIS C5141, C5102 and IEC 384-4
P A R T N U M B E R IN G S Y S T E M
N R S X 1 0 1 M 2 5 V 6 .3 X 1 1 T R
T a p e a n d R e e l( o p tio n a l)
S iz e in m m
W o r k in g V o lt a g e
T o le r a n c e C o d e M = 2 0 % , K = 1 0 %
C a p a c ita n c e C o d e in µ F , fir s t 2 d ig its a r e s ig n ific a n t,
T h ir d d ig it is n o . o f z e r o s
S e r ie s
®
NIC COMPONENTS CORPORATION
RIPPLE CURRENT CORRECTION FACTOR
Frequency (Hz)
Cap. (µF)
120
1K
10K
100K
1.0 ~ 330
0.40
0.68
0.78
1.00
390 ~ 1000
0.50
0.76
0.87
1.00
1200 ~ 2200
0.70
0.85
0.90
1.00
2700 ~ 15000
0.90
0.95
1.00
1.00
Page 19
Miniature Aluminum Electrolytic Capacitors
NRSX Series
DIMENSIONS (mm)
Insulation Sleeve
LEADSPACING AND DIAMETER (mm)
dφ + 0.05
Case Dia.
F
+ 0.5
L + β Max.
15mm Min.
β = 1.5 L < 20 or 2.0 L > 20
4mm
Min.
4x7 5x7 6.3x7 5x11 6.3x11 8φ
L e a d S p a c e ( F ) 1.5
2.0
Lead Dia. (dφ)
0.45
2.5
2.0
2.5
0.5
3.5
10 ~ 12.5φ
16 ~ 18φ
5.0
7.5
0.6
0.8
Dφ + α
SLEEVE COLOR: DARK BROWN
STANDARD PRODUCTS, CASE SIZES AND SPECIFICATIONS
Cap.
W.V.
Case Size Lead Space Max. Tan δ Max. LC (µA) Max. Z(Ω)
Max. Ripple Current
(Vdc) (µF) Code Dφ x L(mm)
(mm)
at 120Hz
2 minutes 100Khz/20°C 100Khz/105°C (mA rms)
27
270
4x7
1.5
0.22
3.0
2.0
65
56
560
5x7
2.0
0.22
3.5
0.95
120
100 101
5 x 11
2.0
0.22
6.3
0.42
190
120 121
6.3 x 7
2.5
0.22
7.5
0.45
200
220 221
6.3 x 11
2.5
0.22
13.9
0.22
300
270 271
6.3 x 11
2.5
0.22
17.0
0.22
300
330 331
6.3 x 11
2.5
0.22
20.8
0.30
280
390 391
8 x 11.5
3.5
0.22
24.6
0.11
560
470 471
8 x 11.5
3.5
0.22
29.6
0.11
560
560 561
8 x 12.5
3.5
0.22
35.3
0.11
570
8 x 15
3.5
730
820 821
0.22
51.7
.085
10 x 12.5
5.0
800
8 x 20
3.5
.069
800
1200 122
0.22
75.6
10 x 16
5.0
.062
1050
6.3
10 x 20
.044
1250
1500 152
5.0
0.23
94.5
12.5 x 16
.062
1150
1800 182
10 x 22
5.0
0.23
113
.039
1450
2200 222
10 x 22
5.0
0.24
139
.039
1450
2700 272 12.5 x 20
0.25
170
.038
1600
3300 332 12.5 x 20
5.0
0.26
208
.038
1600
3900 392 12.5 x 25
5.0
0.27
246
.029
1800
5600 562 12.5 x 25
5.0
0.30
353
.031
1780
6800 682
16 x 25
7.5
0.32
428
.022
2100
8200 822 16 x 31.5
7.5
0.35
517
.018
2350
10000 103
16 x 35
7.5
0.38
630
.018
2550
12000 123 18 x 35.5
7.5
0.42
756
.015
3200
15000 153 18 x 35.5
7.5
0.48
945
.015
3200
22
220
4x7
1.5
0.19
3.0
1.15
90
39
390
5x7
2.0
0.19
3.9
.49
160
5 x 11
2.0
.42
190
82
820
0.19
8.2
6.3 x 7
2.5
.24
280
10
100 101
5 x 11
2.0
0.19
10
.42
190
150 151
6.3 x 11
2.5
0.19
15
.22
300
180 181
6.3 x 11
2.5
0.19
18
.22
300
220 221
6.3 x 11
2.5
0.19
22
.22
300
330 331
8 x 11.5
3.5
0.19
33
.11
560
®
NIC COMPONENTS CORPORATION
Page 20
LEADED
Polarity Marking
Miniature Aluminum Electrolytic Capacitors
NRSX Series
LEADED
STANDARD PRODUCTS, CASE SIZES AND SPECIFICATIONS
W.V.
(Vdc)
C ap.
(µ F)
C ase S ize Lead Space
(m m )
C ode D φ x L (m m )
M ax. Tanδ
at 120H z
M ax. LC (µ A)
M ax. Z (Ω )
2 m inutes
100K hz/20°C
390
391
8 x 12.5
3.5
0.19
39
.11
570
470
471
8 x 12.5
3.5
0.19
47
.16
410
560
561
10 x 12.5
5.0
0.19
56
.085
800
8 x 15
3.5
.085
730
680
681
0.19
68
.09
800
.062
1050
.069
800
.062
1050
.044
1250
.063
1150
820
821
1000
102
10 x 12.5
5.0
10 x 16
5.0
8 x 20
3.5
10 x 16
0.19
82
0.19
100
5.0
10 x 20
1200
122
5.0
0.19
120
12.5 x 16
10
1500
152
10 x 22
5.0
0.20
150
.039
1450
1800
182
12.5 x 20
5.0
0.20
180
.038
1600
2200
222
12.5 x 20
5.0
0.21
220
.038
1600
2700
272
12.5 x 25
5.0
0.22
270
.029
1800
3300
332
12.5 x 25
5.0
0.23
330
.029
1880
3900
392
16 x 25
7.5
0.24
390
.022
2100
4700
472
16 x 25
7.5
0.25
470
.022
2100
5600
562
16 x 25
7.5
0.27
560
.022
2100
6800
682
16 x 31.5
7.5
0.29
680
.018
2350
8200
822
16 x 35
7.5
0.35
820
.018
2550
10000
103
18 x 35.5
7.5
0.35
1000
.018
2800
15
150
4 x 7
1.5
0.16
3
1.15
90
27
270
5 x 7
2.0
0.16
4.3
.49
160
47
470
5 x 11
2.0
0.16
7.5
.42
190
9.0
.42
190
56
560
2.0
0.16
2.5
.49
280
5 x 11
6.3 x 7
16
M ax. R ipple C urrent
100K hz/105°C (m A rm s)
68
680
5 x 11
2.0
0.16
10.9
.42
190
100
101
6.3 x 11
2.5
0.16
16
.22
300
120
121
6.3 x 11
2.5
0.16
19
.22
300
220
221
8 x 11.5
3.5
0.16
35
.11
560
270
271
8 x 12.5
3.5
0.16
43
.11
570
330
331
8 x 12.5
3.5
0.16
53
.16
410
390
391
10 x 12.5
5.0
0.16
62
.085
800
8 x 15
3.5
470
471
0.16
75
.085
560
561
10 x 12.5
5.0
10 x 16
5.0
730
800
0.16
90
.062
1050
®
NIC COMPONENTS CORPORATION
Page 21
Miniature Aluminum Electrolytic Capacitors
NRSX Series
STANDARD PRODUCTS, CASE SIZES AND SPECIFICATIONS
8 x 20
680
3.5
681
0.16
10 x 16
821
5.0
5.0
0.16
800
.062
1050
.044
1250
.063
1150
109
10 x 20
820
.069
LEADED
Cap.
W.V.
Case Size Lead Space Max. Tanδ Max. LC (µA) Max. Z (Ω )
Max. Ripple Current
(Vdc) (µF) Code Dφ x L(mm)
(mm)
2 minutes
100Khz/20°C 100Khz/105°C (mA rms)
at 120Hz
131
12.5 x 16
1000 102
10 x 22
5.0
0.16
160
.039
1450
1200 122
10 x 22
5.0
0.16
192
.039
1450
1500 152
12.5 x 20
5.0
0.17
240
.038
1600
1800 182
12.5 x 25
5.0
0.17
288
.029
1800
12.5 x 25
5.0
0.18
352
.022
16
2200 222
1800
16 x 25
7.5
2100
2700 272
16 x 25
7.5
0.19
432
.022
2100
3900 392
16 x 25
7.5
0.21
624
.022
2100
4700 472
16 x 31.5
7.5
0.22
752
.018
2350
5600 562
16 x 35
7.5
0.24
896
.018
2550
6800 682
16 x 35
7.5
0.26
1088
.018
2550
8200 822
18 x 35.5
7.5
0.29
1310
.018
2800
10
100
4 x 7
1.5
0.14
3.0
1.15
90
22
220
5 x 7
2.0
0.14
5.5
.49
160
5 x 11
2.0
.42
190
39
390
0.14
9.8
.24
280
6.3 x 7
2.5
47
470
5 x 11
2.0
0.14
12
.42
190
82
820
6.3 x 11
2.5
0.14
21
.22
300
100
101
6.3 x 11
2.5
0.14
25
.22
300
180
181
8 x 12.5
3.5
0.14
45
.11
570
220
221
8 x 12.5
3.5
0.14
55
.11
570
270
271
10 x 12.5
5.0
0.14
68
.085
850
8 x 15
3.5
330
331
0.14
83
.085
25
390
391
470
471
10 x 12.5
5.0
10 x 16
5.0
8 x 20
3.5
10 x 16
730
800
0.14
98
0.14
118
5.0
10 x 20
560
561
5.0
0.14
681
10 x 22
5.0
0.14
1050
.069
800
.062
1050
.044
1250
.063
1150
.039
1450
140
12.5 x 16
680
.062
170
®
NIC COMPONENTS CORPORATION
Page 22
Miniature Aluminum Electrolytic Capacitors
NRSX Series
LEADED
STANDARD PRODUCTS, CASE SIZES AND SPECIFICATIONS
W .V.
(V d c )
25
C a p.
(µ F )
C ode
820
821
C a s e S iz e
D φ x L (m m )
Lead S pace
(m m )
10 x 22
5 .0
1 2 .5 x 2 0
5 .0
M a x . Ta n δ
at 120H z
M a x . L C (µ A )
2 m in u te s
0 .1 4
205
M a x . Z (Ω )
1 0 0 K h z /2 0 ° C
M a x . R ip p le C u r re n t
1 0 0 K h z /1 0 5 ° C ( m A r m s )
.0 3 9
1450
.0 3 8
1600
1000
102
1 2 .5 x 2 0
5 .0
0 .1 4
250
.0 3 8
1600
1200
122
1 2 .5 x 2 5
5 .0
0 .1 4
300
.0 2 9
1800
1500
152
1 2 .5 x 2 5
5 .0
0 .1 5
375
.0 2 9
1800
1800
182
16 x 25
7 .5
0 .1 5
450
.0 2 2
2100
2200
222
16 x 25
7 .5
0 .1 6
550
.0 2 2
2100
2700
272
16 x 25
7 .5
0 .1 7
675
.0 2 2
2100
3300
332
1 6 x 3 1 .5
7 .5
0 .1 8
825
.0 1 8
2350
3900
392
16 x 35
7 .5
0 .1 9
975
.0 1 8
2550
4700
472
1 8 x 3 5 .5
7 .5
0 .2 0
1175
.0 1 8
2800
6 .8
6R 8
4 x 7
1 .5
0 .1 2
3 .0
1 .1 5
90
12
120
5 x 7
2 .0
0 .1 2
4 .2
.4 9
160
22
220
5 x 11
2 .0
0 .1 2
7 .7
.4 2
190
5 x 11
2 .0
.4 2
190
27
270
0 .1 2
9 .5
.2 9
280
6 .3 x 7
2 .5
33
330
5 x 11
2 .0
0 .1 2
12
.4 2
190
47
470
6 .3 x 1 1
2 .5
0 .1 2
17
.2 2
300
56
560
6 .3 x 1 1
2 .5
0 .1 2
20
.2 2
300
68
680
6 .3 x 1 1
2 .5
0 .1 2
24
.2 2
300
100
101
8 x 1 1 .5
3 .5
0 .1 2
35
.1 1
560
120
121
8 x 1 2 .5
3 .5
0 .1 2
42
.1 1
570
150
151
8 x 1 2 .5
3 .5
0 .1 2
53
.1 1
570
180
181
1 0 x 1 2 .5
0 .1 2
63
.0 8 5
220
8 x 15
3 .5
1 0 x 1 2 .5
5 .0
221
800
730
0 .1 2
77
.0 8 5
800
35
270
271
10 x16
5 .0
0 .1 2
95
.0 6 2
1050
330
331
8 x 20
3 .5
0 .1 2
116
.0 6 9
800
390
391
10 x 20
5 .0
0 .1 2
137
.0 4 4
1250
470
471
10 x 22
5 .0
0 .1 2
165
.0 3 9
1450
.0 3 9
1450
560
561
5 .0
0 .1 2
196
.0 3 8
1600
10 x 22
1 2 .5 x 2 0
680
681
1 2 .5 x 2 0
5 .0
0 .1 2
238
.0 3 8
1600
820
821
1 2 .5 x 2 5
5 .0
0 .1 2
287
.0 2 9
1800
1000
102
1 2 .5 x 2 5
5 .0
0 .1 2
350
.0 2 9
1800
1200
122
1 2 .5 x 2 5
5 .0
0 .1 2
420
.0 2 9
1800
1500
152
16 x 25
7 .5
0 .1 3
525
.0 2 2
2100
1800
182
16 x 25
7 .5
0 .1 3
630
.0 2 2
2100
2200
222
1 6 x 3 1 .5
7 .5
0 .1 4
770
.0 1 8
2350
2700
272
16 x 35
7 .5
0 .1 5
945
.0 1 8
2550
3300
332
1 8 x 3 5 .5
7 .5
0 .1 6
1155
.0 1 8
2800
®
NIC COMPONENTS CORPORATION
Page 23
Miniature Aluminum Electrolytic Capacitors
NRSX Series
STANDARD PRODUCTS, CASE SIZES AND SPECIFICATIONS
50
C ap.
(µ F )
C ode
1 .0
1R 0
C a s e S iz e
D φ x L (m m )
Lead S pace
(m m )
M a x . Ta n δ
at 120H z
M a x . L C (µ A )
2 m in u te s
M a x . Z (Ω )
1 0 0 K h z /2 0 ° C
M a x . R ip p le C u r r e n t
1 0 0 K h z /1 0 5 ° C (m A r m s )
5 x 11
2 .0
0 .1
3 .0
3 .3
30
2 .2
2R 2
5 x 11
2 .0
0 .1
3 .0
3 .0
45
3 .3
3R 3
5 x 11
2 .0
0 .1
3 .0
2 .7
55
4 .7
4R 7
5 x 11
2 .0
0 .1
3 .0
2 .0
90
10
100
5 x 11
2 .0
0 .1
5 .0
2 .0
90
15
150
5 x 11
2 .0
0 .1
7 .5
1 .2
130
22
220
5 x 11
2 .0
0 .1
11
.7 0
160
33
330
6 .3 x 1 1
2 .5
0 .1
17
.4 3
220
47
470
6 .3 x 1 1
2 .5
0 .1
24
.4 3
220
68
680
8 x 1 1 .5
3 .5
0 .1
34
.2 6
360
100
101
1 0 x 1 2 .5
5 .0
0 .1
50
.1 6
550
150
151
10 x 16
5 .0
0 .1
75
10 x 20
220
221
5 .0
0 .1
10 x 22
331
470
471
680
760
950
.1 1
810
.0 7 2
1000
110
1 2 .5 x 1 6
330
.1 2
.0 8 8
LEADED
W .V .
(V d c )
5 .0
0 .1
165
.0 5 9
1200
1 2 .5 x 2 0
5 .0
0 .1
235
.0 5 9
1200
681
1 2 .5 x 2 5
5 .0
0 .1
340
.0 4 5
1400
1000
102
16 x 25
7 .5
0 .1
500
.0 3 9
1750
1500
152
16 x 35
7 .5
0 .1 1
750
.0 2 5
2300
2200
222
1 8 x 3 5 .5
7 .5
0 .1 2
1100
.0 2 4
2400
1 2 .5 x 2 0
®
NIC COMPONENTS CORPORATION
Page 24
Technical Inquiries:
tpmg@niccomp.com
Sales Channel:
Corporate Head Quarters:
NIC Components Corp. , 70 Maxess Road, Melville, NY 11747 USA
Tel (631) 396-7500
Fax (631) 396-7575
Sales Inquiries: sales@niccomp.com
NIC Components Corp South-East 1129 Royal Palm Beach Blvd. Suite #57 Royal Palm Beach, FL 33411 USA
Phone: (561) 753-1600
Fax: (561) 792-0560
West Coast Operations:
NIC Components Corp., 2070 Ringwood Avenue, San Jose, CA 95131 USA
Tel (408) 954-8470
Fax (408) 954-0349
Sales Inquiries: sales@niccomp.com
NIC Components Corp Pacific North-West 17325 167th Ave, NE Woodinville, Washington 98072 USA
Phone: (425)424-3363
Fax: (425)424-3393
European Operations:
NIC Eurotech Ltd., 14 Top Angel, Buckingham Industrial Park, Buckingham MK18 1TH United Kingdom
Tel: 44 1280 813 737
Fax: 44 1280 814 737
Sales Inquiries: niesales@niccomp.com
Asia Operations:
NIC Components Asia Pte Ltd, 701 Sims Drive, #07-01 LHK Building, Singapore 387383
Tel: 65-8441575
Fax: 65-8441646
Sales Inquiries: niasales@niccomp.com
NIC Components Asia Pte Ltd 11-5-3 New Bob Centre 11, Jalan Gottlieb, 10350 Penang, Malaysia
Tel (604) 2290355
Fax (604) 2290353
NIC Components Asia Pte Ltd Suite 1111, Tower II, Silvercord, 30, Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel (852) 2736 3356
Fax (852) 2377 9469
NIC Components Asia Pte Ltd No.38 , North Cao Xi Road, 6F/C Shanghai, 200030 China
Tel: 86-21-64412606
Fax: 86-21-64875175
NIC Sales Representatives & Distributors: www Links
North America
Europe: Link
Canada: Link
Mid-East: Link
Mexico: Link
S.E. Asia: Link
USA: Link
South America: Link
NIC Components Corp.
www.niccomp.com
Page 25